Commit Graph

1398 Commits

Author SHA1 Message Date
David S. Miller d793fb4682 wireless-drivers-next patches for 4.20
First set of new features for 4.20. mt76 driver is going through major
 refactoring and that's why there are so many mt76 patches. iwlwifi is
 also under heavy development and smaller changes to other drivers.
 
 Also wireless-drivers was merged to fix a conflict between the two trees.
 
 Major changes:
 
 ath10k
 
 * limit available channels via DT ieee80211-freq-limit
 
 wil6210
 
 * add 802.11r Fast Roaming support for AP and station modes
 
 * add support for channel 4
 
 iwlwifi
 
 * new FW API handling
 
 * some improvements in the PCI recovery mechanism
 
 * enable a new scanning feature;
 
 * continued work on HE (mostly radiotap)
 
 * TKIP implementation in new devices
 
 * work continues for new 22560 hardware
 
 mt76
 
 * add support for Alfa AWUS036ACM
 
 * lots of refactoring to make it easier to add new hardware support
 
 * prepare for adding mt76x0e (pci-e variant) support
 
 * add CONFIG_MT76x0E kconfig symbol
 
 brcmfmac
 
 * add support CYW89342 mini-PCIe device
 
 * add 4-way handshake offload detection for FT-802.1X
 
 * enable NL80211_EXT_FEATURE_CQM_RSSI_LIST
 
 * fix for proper support of 160MHz bandwidth
 
 rtl8xxxu
 
 * add rtl8188ctv support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJbs6LVAAoJEG4XJFUm622b0sAH/1WLU433ZipgULs6PLULDz3/
 cFS4CSu9+Hewx9MKvdr+vgMoru70CkiFIZMJeo/oNqAtFb6TQhXPFz2Ci3K4Y6jK
 yZKATh9PvzQrOGQ1iy4p8QK6bQ9WRUNY5+elJuNQH62oB/SZ0XqCMU8ujUQRSaTC
 xVqfIRnAtKcchAm/nqxx+EwlGCiUmlyt2pw2IUXXABLW7Fkj3Z3ISlOd8xVW6tca
 XyWlx9pjZOrFrgOzyORB/B4TNI5q5CdcYPg2DEpqOs6LQeGXEq4BSxfxCe2de4ku
 St6417K0OFTbUTZS7kJaxJnQFd1ZWhDtj5cJUzdNsSVzqeYeJoTnR4FBqDWLlec=
 =7Nmq
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2018-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.20

First set of new features for 4.20. mt76 driver is going through major
refactoring and that's why there are so many mt76 patches. iwlwifi is
also under heavy development and smaller changes to other drivers.

Also wireless-drivers was merged to fix a conflict between the two trees.

Major changes:

ath10k

* limit available channels via DT ieee80211-freq-limit

wil6210

* add 802.11r Fast Roaming support for AP and station modes

* add support for channel 4

iwlwifi

* new FW API handling

* some improvements in the PCI recovery mechanism

* enable a new scanning feature;

* continued work on HE (mostly radiotap)

* TKIP implementation in new devices

* work continues for new 22560 hardware

mt76

* add support for Alfa AWUS036ACM

* lots of refactoring to make it easier to add new hardware support

* prepare for adding mt76x0e (pci-e variant) support

* add CONFIG_MT76x0E kconfig symbol

brcmfmac

* add support CYW89342 mini-PCIe device

* add 4-way handshake offload detection for FT-802.1X

* enable NL80211_EXT_FEATURE_CQM_RSSI_LIST

* fix for proper support of 160MHz bandwidth

rtl8xxxu

* add rtl8188ctv support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 11:46:29 -07:00
Kalle Valo 08b0109eea Second set of iwlwifi patches for 4.20
* TKIP implementation in new devices;
 * Fix for the shared antenna setting in 22000 series;
 * Report that we set the RU offset in HE code;
 * Fix some register addresses in 22000 series;
 * Fix one FW feature TLV that had a conflict with another value;
 * A couple of fixes for SoftAP mode;
 * Work continues for new 22560 hardware;
 * Some fixes in the datapath;
 * Some debugging and other general fixes;
 * Some cleanups, small improvements and other general fixes;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlutzKgACgkQoUecoho8
 xfpv7g//fhLx4xvYl2i5sVhk+FcYCEUcyYiVO4wrXdmdNafobuJRaMuxuUuagExE
 J+wsQmSt3LribOGQB06aa/Lf+d5FyKpD8Qcs3ZY2WX5OlLRN1EczNoiTXKfE0E1D
 d0a80IjD2EeqhhU9D/7DTBsN7zCpJEW5otJ4S9WY0Y/MKHSFyiDcoqnx4H1ZAv5N
 WH8cvTjGf4tPjkjuuEPLlVhz65hqNsM1A+VaZCU21SOlc8ihSXSAt1h8AMnWLPLz
 MHxzMbnjWPN8qjgKacEy7ETP14iCjTryRsXBWt48A+XZYyUQFNcnjFVME5KyOB6V
 YkHb8EQSkjHOWg4eutOJijNPBHLxQDFHY6LdOZ3JEmqtOKPt+A82JwXmBq6Ez4O4
 DobrAEvDwnBMFhNoboNA9C0/B57j9+FPkgd0a8Y98Rr28SBYbnmK8wlZVRWU0S/9
 WRg0pafzmCh1hcYedLWfGFkNio9ZZqfhLOWdVpaobJkE47gDLx3aoyXx7UK4VSfG
 kIigRccQsOYfOUNvQM8f/J2/uzy1TfkM7E4PaU6Q6lIhfjDuWPzGY7SpuwpSd1hf
 qu1EB4EwRiOdvwc/EiLJpsrMSNe9m1EWIopfas0x1dallOSC1bNIRTh2o4oN3a3V
 vcvtTIwST5C5IvMeZOFR2xmqArypWlEjvE2ieuq8RtMZnMaq1Rk=
 =5Y2V
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2018-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Second set of iwlwifi patches for 4.20

* TKIP implementation in new devices;
* Fix for the shared antenna setting in 22000 series;
* Report that we set the RU offset in HE code;
* Fix some register addresses in 22000 series;
* Fix one FW feature TLV that had a conflict with another value;
* A couple of fixes for SoftAP mode;
* Work continues for new 22560 hardware;
* Some fixes in the datapath;
* Some debugging and other general fixes;
* Some cleanups, small improvements and other general fixes;
2018-10-01 18:49:48 +03:00
Nathan Chancellor c15ace868d ipw2x00: Remove unnecessary parentheses
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: warning: equality
comparison with extraneous parentheses [-Wparentheses-equality]
                if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) {
                     ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~
drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: remove
extraneous parentheses around the comparison to silence this warning
                if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) {
                    ~                    ^               ~
drivers/net/wireless/intel/ipw2x00/ipw2200.c:5655:28: note: use '=' to
turn this equality comparison into an assignment
                if ((priv->ieee->iw_mode == IW_MODE_ADHOC)) {
                                         ^~
                                         =
1 warning generated.

Link: https://github.com/ClangBuiltLinux/linux/issues/134
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-01 18:30:26 +03:00
Ilan Peer 6f3df8c119 iwlwifi: mvm: Allow TKIP for AP mode
Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.

Fixes: 85aeb58cec ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:30 +03:00
Johannes Berg 4ef66965ce iwlwifi: fix LED command capability bit
The capability bit was added to the driver and had been negotiated
with the firmware, but then got forgotten in the firmware and later
reused for a different capability. Now the firmware added it in a
new bit.

Fixes: 2eabc84d2f ("iwlwifi: mvm: only send LEDS_CMD when the FW supports it")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:29 +03:00
Golan Ben Ami 6a529317ff iwlwifi: configure power scheme to balanced for 22560 devices
As a temporary stage in the 22560 devices bring up, we disabled
power save, to avoid bugs related to that domain.
Now we would like to use power save so enable the balanced mode,
and allow configuring the mode via module parameter.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:29 +03:00
Sara Sharon 88964b2ea0 iwlwifi: pcie: add infrastructure for multiple debug buffers
In future devices we will have more than one debug buffer.
Prepare the infrastructure for allocation and release of
multiple debug buffers by grouping the variables in an array
of structures and moving it to trans section, where they will
be visible to opmode and FW.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:28 +03:00
Johannes Berg 0044f1716c iwlwifi: pcie: support transmitting SKBs with fraglist
We want to be able to build A-MSDUs in higher layers, e.g. by
xmit_more, so support transmitting SKBs with fraglist to use
it for such.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:28 +03:00
Emmanuel Grumbach 5724d8b9e9 iwlwifi: mvm: remove support for adjacent channel compensation
We no longer want to consider the RSSI if the beacon / probe
has been heard on an adjacent channel.
This was based on a firmware capability that is now
unavailable.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:28 +03:00
Erel Geron d5367de2d8 iwlwifi: mvm: TLC support for Coex Schema 2
The new coex schema requires setting the non-shared antenna
for the single_stream_ant_msk field in the TLC command.

Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:27 +03:00
Avraham Stern 337bfc9881 iwlwifi: mvm: set wep key for all stations in soft ap mode
When operating as a soft ap with wep security, the key was not
configured to the fw for the stations, based on the fact that the
key will be specified in the tx command.

However, in the new tx api the tx command does not include the key,
which resulted in all data frames going out un-encrypted.

Fix it by configuring the key for all the stations as they are added.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:27 +03:00
Sara Sharon 7126b6f2bb iwlwifi: mvm: use correct FIFO length
Current FIFO size calculation is wrong for two reasons:
- We access lmac 0 by default
- We don't take 11ax into consideration.
Fix both.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:27 +03:00
Shaul Triebitz 753e976128 iwlwifi: pcie: set RB size according to user settings
RB size can be configured by user to be greater than 4K.
That's needed for monitor to capture big AMSDUs.
The firmware now enables different RB sizes configuration
via context info.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:27 +03:00
Shaul Triebitz 034925cb5d iwlwifi: mvm: do not override amsdu size user settings
Since AMSDUs are not de-aggregated by HW in monitor mode,
we still need the option for setting large RBs (up to 12K).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:26 +03:00
Golan Ben Ami 81f0c66187 iwlwifi: pcie: fit reclaim msg to MAX_MSG_LEN
Today, the length of a debug message in iwl_trans_pcie_reclaim
may pass the MAX_MSG_LEN, which is 110.
An example for this kind of message is:

'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2),
last_to_free 65535 is out of range [0-65536] 2 2.'

Cut the message a bit so it will fit the allowed MAX_MSG_LEN.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:26 +03:00
Rajat Jain 9a098a89df iwlwifi: pcie: Fail fast if HW is inaccessible at probe
If the HW is not responding at probe time, fail immediately complaining
about it. Without this, we see that the kernel spends > 100ms trying to
load firmware (even gives an incorrect impression that it actually
loaded a firmware) and do unnecesary processing before concluding that
the device is not accessible:

 INFO kernel: [   34.092678] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
 WARNING kernel: [   34.093560] iwlwifi 0000:01:00.0: Direct firmware load for iwl-dbg-cfg.ini failed with error -2
 INFO kernel: [   34.111523] iwlwifi 0000:01:00.0: loaded firmware version 17.318154.0 op_mode iwlmvm
 INFO kernel: [   34.173250] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0xFFFFFFFF
 ERR kernel: [   34.198023] iwlwifi 0000:01:00.0: iwlwifi transaction failed, dumping registers
 ERR kernel: [   34.198044] iwlwifi 0000:01:00.0: iwlwifi device config registers:

Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:26 +03:00
Johannes Berg bb03927e0e iwlwifi: pcie: tx: pull tracing out of iwl_fill_data_tbs()
This will allow us to reuse the function later for adding fraglist
SKBs to the TFD.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:25 +03:00
Johannes Berg 7d50d76e30 iwlwifi: pcie: tx: unify TFD unmapping
When anything fails, we unmap the whole TFD in three different
places scattered throughout the code. Unify this to a single
place.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:25 +03:00
Johannes Berg 53f474e6a8 iwlwifi: pcie: gen2: build A-MSDU only for GSO
If the incoming frame should be an A-MSDU, it may already be one,
for example in the case of NAN multicast being encapsulated in an
A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the
skb actually contains GSO data.

Fixes: 6ffe5de35b ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:25 +03:00
Johannes Berg 3f425b81ce iwlwifi: pcie: gen2: pull adding frags to helper routine
Move the skb fragment loop into a helper routine to be able
to reuse it later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:25 +03:00
Johannes Berg 6f68cc367a iwlwifi: api: annotate compressed BA notif array sizes
Annotate the compressed BA notification array sizes and
make both of them 0-length since the length of 1 is just
confusing - it may be different than that and the offset
to the second one needs to be calculated in the C code
anyhow.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:24 +03:00
David Spinadel 7f768ad5eb iwlwifi: mvm: Support TKIP on gen2 data path
Make the adjustments for gen2 TX and RX of TKIP packets.  Strip MIC on
RX.  Don't add IV space and keep the MIC space zeroed on TX.

Devices that support gen2 data path support TKIP only in station mode.
In all other modes, fall back to SW encryption. Do this early in the
set_key() callback so that the key flags would not be incorrectly set.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:24 +03:00
Sara Sharon 84fb372c89 iwlwifi: pcie: read correct prph address for newer devices
For newer devices we have higher range of periphery
addresses. Currently it is masked out, so we end up
reading another address.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:23 +03:00
Shaul Triebitz 989209610b iwlwifi: mvm: enable sending HE_AIR_SNIFFER command via debugfs
In order to receive TB (Trigger Based) PPDU in monitor mode,
the Driver must send the HE_AIR_SNIFFER_CONFIG_CMD host command.
Enable that via debugfs.

Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:23 +03:00
Dreyfuss, Haim 10a970dff1 iwlwifi: mvm: cleanup dead code on resume flow for non unified image.
CDB support has nothing to do with non unified image.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:23 +03:00
Erel Geron a40287727d iwlwifi: fix non_shared_ant for 22000 devices
The non-shared antenna was wrong for 22000 device series.
Fix it to ANT_B for correct antenna preference by coex in MVM driver.

Fixes: e34d975e40 ("iwlwifi: Add a000 HW family support")
Signed-off-by: Erel Geron <erelx.geron@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:23 +03:00
Emmanuel Grumbach 79f25b10c9 iwlwifi: dbg: don't crash if the firmware crashes in the middle of a debug dump
We can dump data from the firmware either when it crashes,
or when the firmware is alive.
Not all the data is available if the firmware is running
(like the Tx / Rx FIFOs which are available only when the
firmware is halted), so we first check that the firmware
is alive to compute the required size for the dump and then
fill the buffer with the data.

When we allocate the buffer, we test the STATUS_FW_ERROR
bit to check if the firmware is alive or not. This bit
can be changed during the course of the dump since it is
modified in the interrupt handler.

We hit a case where we allocate the buffer while the
firmware is sill working, and while we start to fill the
buffer, the firmware crashes. Then we test STATUS_FW_ERROR
again and decide to fill the buffer with data like the
FIFOs even if no room was allocated for this data in the
buffer. This means that we overflow the buffer that was
allocated leading to memory corruption.

To fix this, test the STATUS_FW_ERROR bit only once and
rely on local variables to check if we should dump fifos
or other firmware components.

Fixes: 04fd2c2822 ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:22 +03:00
Johannes Berg b08e876daf iwlwifi: remove ucode error tracepoint
Alexei's patch, assumed that all versions of "struct iwl_error_event_table"
are the same, but there are really different versions in different files.

Rather than trying to fix this, or splitting the tracepoint, or anything of
the sort, just remove it entirely - turns out that nobody really uses it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:22 +03:00
Johannes Berg a76938f35e iwlwifi: mvm: report RU offset is known
We already report the RU offset, so we'd better also
report that we know the value.

Fixes: e5721e3f77 ("iwlwifi: mvm: add radiotap data for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:22 +03:00
Shaul Triebitz caf3216f65 iwlwifi: iwlmvm: fix typo when checking for TX Beamforming
Check the actual bit (mask) in Rx notification rate_n_flags.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:21 +03:00
Shahar S Matityahu da7527173b iwlwifi: debug flow cleanup
Cleanup of the debug flow by moving several flows to separate
functions to increase readability.  Three functions were created:

1. iwl_fw_get_prph_len - returns the size needed for periphery dump.
2. iwl_fw_dump_mem for - executes the memory dumping flow.
3. iwl_trans_get_fw_monitor_len - returns the size needed for monitor dump.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:21 +03:00
Johannes Berg 838f4c73a3 iwlwifi: RX API: remove unnecessary anonymous struct
There's no value in having an anonymous struct for holding
a few fields, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:21 +03:00
Sara Sharon 5cfe79c8d9 iwlwifi: fw: stop and start debugging using host command
In new devices, access to periphery is forbidden. Send instead
host command to start and stop debugging.

Memory allocation is written in context info, but in case we
need to update it there is a dedicated command. Add definitions,
currently unused, of the new command.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:21 +03:00
Sara Sharon d25eec305c iwlwifi: fw: add a restart FW debug function
Move the restart FW debug code to a function. This avoids code
duplication and lays the infra to support the new start and stop
host commands in some future devices.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:20 +03:00
Emmanuel Grumbach 7eff513674 iwlwifi: mvm: fix a comment about the SP length
The SP length in the ADD_STA command is an actual number of
frames, and not the SP len as it appears in the WME IE.
Fix that comment. The actual code is fine.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28 08:57:20 +03:00
Shaul Triebitz add7453ad6 wireless: align to draft 11ax D3.0
Align to new 11ax draft D3.0.  Change/add new MAC and PHY capabilities
and update drivers' 11ax capabilities and mac80211's debugfs
accordingly.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05 10:09:50 +02:00
David S. Miller fc3e3bf55f Here are quite a large number of fixes, notably:
* various A-MSDU building fixes (currently only affects mt76)
  * syzkaller & spectre fixes in hwsim
  * TXQ vs. teardown fix that was causing crashes
  * embed WMM info in reg rule, bad code here had been causing crashes
  * one compilation issue with fix from Arnd (rfkill-gpio includes)
  * fixes for a race and bad data during/after channel switch
  * nl80211: a validation fix, attribute type & unit fixes
 along with other small fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAluNJXcACgkQB8qZga/f
 l8Qvfw//dBwlhMII862Evk4M8OzhdHfkJ4Kp/d2C476whbEySU/jRIIeetmVpXYV
 5cfStTxBpGkwMj5PXy3DaA2PO++L5qaApDJfHc8DNWNmvt9rRRJul1zP05HjZRxW
 G7aFCFRWVK0dlmVP9GC/b20KyUvz4OpklBnxylkIrx0FCkw5bAHs1SsjGZCg/6Tm
 008DAhFz3Ds6hNLxwricvrk5oQ6eC1cDfDd4Rtk3jCYQ4t7KFn5gFoKzKldfLdWe
 TFTpVQ26XAGzn9QVXzAiXN4ZNpUpZrFXosC7cn5Ugiyic4YtnHxS2wVDuL3vs1cL
 J2hoW6wjEBg+U6vmHMcijo1lnQwW7ueYUDWLJPNIXHA6A7sGyA6z6D7vbbvHfoG6
 L681BrYmTmKkXXquu5+r85/9WgP2cmzbRpoIxTQl3sU2Liw2k5IJ9ryLLyul+8z7
 spnDPOY7h4c0JrAvhjHkrKIbbW4FKYunxZJ8dn9eyAzOd/58iKoXzu4yAggwm+0V
 DtZiu0gSr52sKrh1vqEyfhrPFCN1Mc19DRsJBtabUfVEveQTwToCkbZ5s1sLqSId
 m30XUjjYOiRk7MZnncar0lE4//eJ6bnL3Wie3UTmO3xsMwlgKQPqjI4TprNogUCk
 R2dVeGmhm3HSriRHKJL3/D8uzw5mMBI3Kicw9tFSSyVjtJgxvpg=
 =lLBA
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
 * various A-MSDU building fixes (currently only affects mt76)
 * syzkaller & spectre fixes in hwsim
 * TXQ vs. teardown fix that was causing crashes
 * embed WMM info in reg rule, bad code here had been causing crashes
 * one compilation issue with fix from Arnd (rfkill-gpio includes)
 * fixes for a race and bad data during/after channel switch
 * nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03 22:12:02 -07:00
Luca Coelho ab27926d9e iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modules
The devices with PCI device ID 0x34F0 are part of the SoC and can be
combined with some different external RF modules.  The configuration
for these devices should reflect that, but are currently mixed up.  To
avoid confusion with discrete devices, add part of the firmware to be
used and the official name of the device to the cfg structs.

This is least reorganization possible (without messing things even
more) that could be done as a bugfix for this SoC.  Further
reorganization of this code will be done separately.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:42 +03:00
Johannes Berg ea7c2bfdec Revert "iwlwifi: allow memory debug TLV to specify the memory type"
This reverts the addition of memory type in the memory debug TLV
as the firmware never ended up implementing it, and now the PRPH
dump is added as a different TLV.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:42 +03:00
Ayala Beker 930ab73c37 iwlwifi: mvm: activate fragmented EBS in case of fragmented scan
In case of fragmented scan on the HB channels, configure EBS to be
fragmented as well.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:41 +03:00
Golan Ben Ami 1169310fa9 iwlwifi: refactor txq_alloc for supporting more command type
Support more txq_alloc command types by moving the command declaration
to the gen specific area.  While at it, move some of the code segments
to a common place for re-use.

Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:41 +03:00
Johannes Berg 764f9de502 iwlwifi: mvm: decode HE TB PPDU data
Decode the HE TB PPDU data that we get in sniffer mode
and use it to populate the HE radiotap information.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:40 +03:00
Naftali Goldstein 423584dd80 iwlwifi: rs-fw: support dcm
Add flags to the tlc_cfg_cmd for signaling peer support for receiving
Dual Carrier Modulation at BPSK (MCS 0), and set them according to peer
capabilities.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:40 +03:00
Naftali Goldstein 3e467b8e4c iwlwifi: rs-fw: enable STBC in he correctly
In the HE phy capabilities IE there are 2 bits to signal support for
STBC in bandwidths of 80Mhz or less, and of 160Mhz.
Use these bits to determine STBC support if this IE exists.

Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:39 +03:00
Shahar S Matityahu ae17404e38 iwlwifi: avoid code duplication in stopping fw debug data recording
Make all FW debug data stop recording flows to use
iwl_fw_dbg_stop_recording function instead of writing to FW
registers directly.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:39 +03:00
Shahar S Matityahu c5f97542aa iwlwifi: change monitor DMA to be coherent
Allow access to the memory by the host and the device simultaneously.
This will be needed in some future patches.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:38 +03:00
Naftali Goldstein 2859de7637 iwlwifi: mvm: always init rs_fw with 20MHz bandwidth rates
As with the non-offloaded rs case, during assoc on the ap side the phy
context is set to 20MHz until authorization of a client that supports
wider channel-widths. Support this by sending the initial
tlc_config_cmd with max supported channel width of 20MHz until
authorization succeeds.

Fixes: 6b7a5aea71 ("iwlwifi: mvm: always init rs with 20mhz bandwidth rates")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:38 +03:00
Emmanuel Grumbach 65c3b582ec iwlwifi: mvm: send BCAST management frames to the right station
Probe responses were sent to the multicast station while
they should be routed to the broadcast station.
This has no negative effect since the frame was still
routed to the right queue, but it looked very fishy
to send a frame to a (queue, station) tuple where
'queue' is not mapped to 'station'.

Fixes: 7c305de2b9 ("iwlwifi: mvm: Direct multicast frames to the correct station")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:37 +03:00
Ido Yariv 06c34dee07 iwlwifi: Add missing 11n disable module parameter check
In the new method of parsing the NVM the disable_11n module parameter
isn't consulted when setting up HT capabilities. Fix this.

Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:36 +03:00
Johannes Berg 317bc55fa8 iwlwifi: mvm: remove channel 2 from HE radiotap if not applicable
If the bandwidth is only 20 MHz, then the second channel doesn't
exist, but the hardware reports the CRC was OK. Suppress the data
of the second channel in the HE radiotap in this case, by marking
it as not known.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31 11:38:36 +03:00