Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
Use generic libbpf API to parse BTF data from file, instead of re-implementing
it in bpftool.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200802013219.864880-3-andriin@fb.com
In case of btf_id does not exist, a negative error code -ENOENT
should be returned.
Fixes: c93cc69004 ("bpftool: add ability to dump BTF types")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200802111540.5384-1-tianjia.zhang@linux.alibaba.com
Add info on link detach sub-command to man page. Add detach to bash-completion
as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com.
Link: https://lore.kernel.org/bpf/20200731182830.286260-6-andriin@fb.com
Add ability to force-detach BPF link. Also add missing error message, if
specified link ID is wrong.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200731182830.286260-5-andriin@fb.com
Assign "lsm" as a printed name for BPF_PROG_TYPE_LSM in bpftool, so that
it can use it when listing programs loaded on the system or when probing
features.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200724090618.16378-3-quentin@isovalent.com
For probing program and map types, bpftool loops on type values and uses
the relevant type name in prog_type_name[] or map_type_name[]. To ensure
the name exists, we exit from the loop if we go over the size of the
array.
However, this is not enough in the case where the arrays have "holes" in
them, program or map types for which they have no name, but not at the
end of the list. This is currently the case for BPF_PROG_TYPE_LSM, not
known to bpftool and which name is a null string. When probing for
features, bpftool attempts to strlen() that name and segfaults.
Let's fix it by skipping probes for "unknown" program and map types,
with an informational message giving the numeral value in that case.
Fixes: 93a3545d81 ("tools/bpftool: Add name mappings for SK_LOOKUP prog and attach type")
Reported-by: Paul Chaignon <paul@cilium.io>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200724090618.16378-2-quentin@isovalent.com
The optional parameter "map MAP" can be added to "bpftool iter"
command to create a bpf iterator for map elements. For example,
bpftool iter pin ./prog.o /sys/fs/bpf/p1 map id 333
For map element bpf iterator "map MAP" parameter is required.
Otherwise, bpf link creation will return an error.
Quentin Monnet kindly provided bash-completion implementation
for new "map MAP" option.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200723184119.590799-1-yhs@fb.com
The bpftool sources include code to walk file trees, but use multiple
frameworks to do so: nftw and fts. While nftw conforms to POSIX/SUSv3 and
is widely available, fts is not conformant and less common, especially on
non-glibc systems. The inconsistent framework usage hampers maintenance
and portability of bpftool, in particular for embedded systems.
Standardize code usage by rewriting one fts-based function to use nftw and
clean up some related function warnings by extending use of "const char *"
arguments. This change helps in building bpftool against musl for OpenWrt.
Also fix an unsafe call to dirname() by duplicating the string to pass,
since some implementations may directly alter it. The same approach is
used in libbpf.c.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200721024817.13701-1-Tony.Ambardar@gmail.com
A handful of samples and selftests fail to build on s390, because
after commit 0ebeea8ca8 ("bpf: Restrict bpf_probe_read{, str}()
only to archs where they work") bpf_probe_read is not available
anymore.
Fix by using bpf_probe_read_kernel.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200720114806.88823-1-iii@linux.ibm.com
Pulling header files directly out of the kernel sources for inclusion in
userspace programs is highly error prone, not least because it bypasses
the kbuild infrastructure entirely and so may end up referencing other
header files that have not been generated.
Subsequent patches will cause compiler.h to pull in the ungenerated
asm/rwonce.h file via filter.h, breaking the build for tools/bpf:
| $ make -C tools/bpf
| make: Entering directory '/linux/tools/bpf'
| CC bpf_jit_disasm.o
| LINK bpf_jit_disasm
| CC bpf_dbg.o
| In file included from /linux/include/uapi/linux/filter.h:9,
| from /linux/tools/bpf/bpf_dbg.c:41:
| /linux/include/linux/compiler.h:247:10: fatal error: asm/rwonce.h: No such file or directory
| #include <asm/rwonce.h>
| ^~~~~~~~~~~~~~
| compilation terminated.
| make: *** [Makefile:61: bpf_dbg.o] Error 1
| make: Leaving directory '/linux/tools/bpf'
Take a copy of the installed version of linux/filter.h (i.e. the one
created by the 'headers_install' target) into tools/include/uapi/linux/
and adjust the BPF tool Makefile to reference the local include
directories instead of those in the main source tree.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: Xiao Yang <ice_yangxiao@163.com>
Signed-off-by: Will Deacon <will@kernel.org>
Make bpftool show human-friendly identifiers for newly introduced program
and attach type, BPF_PROG_TYPE_SK_LOOKUP and BPF_SK_LOOKUP, respectively.
Also, add the new prog type bash-completion, man page and help message.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200717103536.397595-14-jakub@cloudflare.com
Stephen and 0-DAY CI Kernel Test Service reported broken cross build
for arm (arm-linux-gnueabi-gcc (GCC) 9.3.0), with following output:
/tmp/ccMS5uth.s: Assembler messages:
/tmp/ccMS5uth.s:69: Error: unrecognized symbol type ""
/tmp/ccMS5uth.s:82: Error: unrecognized symbol type ""
Having '@object' for .type diretive is wrong because '@' is comment
character for some architectures. Using STT_OBJECT instead that should
work everywhere.
Also using HOST* variables to build resolve_btfids so it's properly
build in crossbuilds (stolen from objtool's Makefile).
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/bpf/20200714102534.299280-2-jolsa@kernel.org
Reliably remove all the type modifiers from read-only (.rodata) global
variable definitions, including cases of inner field const modifiers and
arrays of const values.
Also modify one of selftests to ensure that const volatile struct doesn't
prevent user-space from modifying .rodata variable.
Fixes: 985ead416d ("bpftool: Add skeleton codegen command")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200713232409.3062144-3-andriin@fb.com
Don't emit warning that bpftool was built without PID iterator support. This
error garbles JSON output of otherwise perfectly valid show commands.
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200710232605.20918-1-andriin@fb.com
The resolve_btfids tool will be used during the vmlinux linking,
so it's necessary it's ready for it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200711215329.41165-3-jolsa@kernel.org
The resolve_btfids tool scans elf object for .BTF_ids section
and resolves its symbols with BTF ID values.
It will be used to during linking time to resolve arrays of BTF
ID values used in verifier, so these IDs do not need to be
resolved in runtime.
The expected layout of .BTF_ids section is described in main.c
header. Related kernel changes are coming in following changes.
Build issue reported by 0-DAY CI Kernel Test Service.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200711215329.41165-2-jolsa@kernel.org
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain
to prevent segfaults, similar to Commit "8ae4121bd89e bpf: Fix bpftool
without skeleton code enabled"). See the error below:
# ./bpftool -p prog
{
"error": "bpftool built without PID iterator support"
},[{
"id": 2,
"type": "cgroup_skb",
"tag": "7be49e3934a125ba",
"gpl_compatible": true,
"loaded_at": 1594052789,
"uid": 0,
"bytes_xlated": 296,
"jited": true,
"bytes_jited": 203,
"bytes_memlock": 4096,
"map_ids": [2,3
Segmentation fault (core dumped)
The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map.
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
Support attaching to BPF_CGROUP_INET_SOCK_RELEASE and properly
display attach type upon prog dump.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200706230128.4073544-4-sdf@google.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-07-04
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).
The main changes are:
1) bpftool ability to show PIDs of processes having open file descriptors
for BPF map/program/link/BTF objects, relying on BPF iterator progs
to extract this info efficiently, from Andrii Nakryiko.
2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
seq_files, from Yonghong Song.
3) Support access to BPF map fields in struct bpf_map from programs
through BTF struct access, from Andrey Ignatov.
4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
via seq_file from BPF iterator progs, from Song Liu.
5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
helper, from Dmitry Yakunin.
6) Optimize BPF sk_storage selection of its caching index, from Martin
KaFai Lau.
7) Removal of redundant synchronize_rcu()s from BPF map destruction which
has been a historic leftover, from Alexei Starovoitov.
8) Several improvements to test_progs to make it easier to create a shell
loop that invokes each test individually which is useful for some CIs,
from Jesper Dangaard Brouer.
9) Fix bpftool prog dump segfault when compiled without skeleton code on
older clang versions, from John Fastabend.
10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix segfault from bpftool by adding emit_obj_refs_plain when skeleton
code is disabled.
Tested by deleting BUILD_BPF_SKELS in Makefile. We found this doing
backports for Cilium when a testing image pulled in latest bpf-next
bpftool, but kept using an older clang-7.
# ./bpftool prog show
Error: bpftool built without PID iterator support
3: cgroup_skb tag 7be49e3934a125ba gpl
loaded_at 2020-07-01T08:01:29-0700 uid 0
Segmentation fault
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Reported-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159375071997.14984.17404504293832961401.stgit@john-XPS-13-9370
Turn off -Wnested-externs to avoid annoying warnings in BUILD_BUG_ON macro when
compiling bpftool:
In file included from /data/users/andriin/linux/tools/include/linux/build_bug.h:5,
from /data/users/andriin/linux/tools/include/linux/kernel.h:8,
from /data/users/andriin/linux/kernel/bpf/disasm.h:10,
from /data/users/andriin/linux/kernel/bpf/disasm.c:8:
/data/users/andriin/linux/kernel/bpf/disasm.c: In function ‘__func_get_name’:
/data/users/andriin/linux/tools/include/linux/compiler.h:37:38: warning: nested extern declaration of ‘__compiletime_assert_0’ [-Wnested-externs]
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/compiler.h:16:15: note: in definition of macro ‘__compiletime_assert’
extern void prefix ## suffix(void) __compiletime_error(msg); \
^~~~~~
/data/users/andriin/linux/tools/include/linux/compiler.h:37:2: note: in expansion of macro ‘_compiletime_assert’
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^~~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’
#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
^~~~~~~~~~~~~~~~~~
/data/users/andriin/linux/tools/include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’
BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition)
^~~~~~~~~~~~~~~~
/data/users/andriin/linux/kernel/bpf/disasm.c:20:2: note: in expansion of macro ‘BUILD_BUG_ON’
BUILD_BUG_ON(ARRAY_SIZE(func_id_str) != __BPF_FUNC_MAX_ID);
^~~~~~~~~~~~
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200701212816.2072340-1-andriin@fb.com
In some build contexts (e.g., Travis CI build for outdated kernel), vmlinux.h,
generated from available kernel, doesn't contain all the types necessary for
BPF program compilation. For such set up, the most maintainable way to deal
with this problem is to keep pre-generated (almost up-to-date) vmlinux.h
checked in and use it for compilation purposes. bpftool after that can deal
with kernel missing some of the features in runtime with no problems.
To that effect, allow to specify path to custom vmlinux.h to bpftool's
Makefile with VMLINUX_H variable.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200630004759.521530-1-andriin@fb.com
Define attach_type_name in common.c instead of main.h so it is only
defined once. This leads to a slight decrease in the binary size of
bpftool.
Before:
text data bss dec hex filename
399024 11168 1573160 1983352 1e4378 bpftool
After:
text data bss dec hex filename
398256 10880 1573160 1982296 1e3f58 bpftool
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200624143154.13145-1-tklauser@distanz.ch
Define prog_type_name in prog.c instead of main.h so it is only defined
once. This leads to a slight decrease in the binary size of bpftool.
Before:
text data bss dec hex filename
401032 11936 1573160 1986128 1e4e50 bpftool
After:
text data bss dec hex filename
399024 11168 1573160 1983352 1e4378 bpftool
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200624143124.12914-1-tklauser@distanz.ch
Building bpftool yields the following complaint:
pids.c: In function 'emit_obj_refs_json':
pids.c:175:80: warning: declaration of 'json_wtr' shadows a global declaration [-Wshadow]
175 | void emit_obj_refs_json(struct obj_refs_table *table, __u32 id, json_writer_t *json_wtr)
| ~~~~~~~~~~~~~~~^~~~~~~~
In file included from pids.c:11:
main.h:141:23: note: shadowed declaration is here
141 | extern json_writer_t *json_wtr;
| ^~~~~~~~
Let's rename the variable.
v2:
- Rename the variable instead of calling the global json_wtr directly.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623213600.16643-1-quentin@isovalent.com
Currently, if the clang-bpf-co-re feature is not available, the build
fails with e.g.
CC prog.o
prog.c:1462:10: fatal error: profiler.skel.h: No such file or directory
1462 | #include "profiler.skel.h"
| ^~~~~~~~~~~~~~~~~
This is due to the fact that the BPFTOOL_WITHOUT_SKELETONS macro is not
defined, despite BUILD_BPF_SKELS not being set. Fix this by correctly
evaluating $(BUILD_BPF_SKELS) when deciding on whether to add
-DBPFTOOL_WITHOUT_SKELETONS to CFLAGS.
Fixes: 05aca6da3b ("tools/bpftool: Generalize BPF skeleton support and generate vmlinux.h")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623103710.10370-1-tklauser@distanz.ch
Add statements about bpftool being able to discover process info, holding
reference to BPF map, prog, link, or BTF. Show example output as well.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-10-andriin@fb.com
Adapt Makefile to support BPF skeleton generation beyond single profiler.bpf.c
case. Also add vmlinux.h generation and switch profiler.bpf.c to use it.
clang-bpf-global-var feature is extended and renamed to clang-bpf-co-re to
check for support of preserve_access_index attribute, which, together with BTF
for global variables, is the minimum requirement for modern BPF programs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-7-andriin@fb.com
Build minimal "bootstrap mode" bpftool to enable skeleton (and, later,
vmlinux.h generation), instead of building almost complete, but slightly
different (w/o skeletons, etc) bpftool to bootstrap complete bpftool build.
Current approach doesn't scale well (engineering-wise) when adding more BPF
programs to bpftool and other complicated functionality, as it requires
constant adjusting of the code to work in both bootstrapped mode and normal
mode.
So it's better to build only minimal bpftool version that supports only BPF
skeleton code generation and BTF-to-C conversion. Thankfully, this is quite
easy to accomplish due to internal modularity of bpftool commands. This will
also allow to keep adding new functionality to bpftool in general, without the
need to care about bootstrap mode for those new parts of bpftool.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-6-andriin@fb.com
Move functions that parse map and prog by id/tag/name/etc outside of
map.c/prog.c, respectively. These functions are used outside of those files
and are generic enough to be in common. This also makes heavy-weight map.c and
prog.c more decoupled from the rest of bpftool files and facilitates more
lightweight bootstrap bpftool variant.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200619231703.738941-5-andriin@fb.com
Relicense it to be compatible with the rest of bpftool files.
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200619222024.519774-1-andriin@fb.com
Commit c34a06c56d ("tools/bpftool: Add ringbuf map to a list of known
map types") added the symbolic "ringbuf" name. Document it in the bpftool
map command docs and usage as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200616113303.8123-1-tklauser@distanz.ch
Add symbolic name "ringbuf" to map to BPF_MAP_TYPE_RINGBUF. Without this,
users will see "type 27" instead of "ringbuf" in `map show` output.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200615225355.366256-1-andriin@fb.com
Remove unnecessary check at the end of codegen() routine which makes codegen()
to always fail and exit bpftool with error code. Positive value of variable
n is not an indicator of a failure.
Fixes: 2c4779eff8 ("tools, bpftool: Exit on error in function codegen")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/bpf/20200612201603.680852-1-andriin@fb.com
Currently, the codegen function might fail and return an error. But its
callers continue without checking its return value. Since codegen can
fail only in the unlikely case of the system running out of memory or
the static template being malformed, just exit(-1) directly from codegen
and make it void-returning.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200611103341.21532-1-tklauser@distanz.ch
Free the memory allocated for the template on error paths in function
codegen.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200610130804.21423-1-tklauser@distanz.ch
This allows transparent cross-compilation with CROSS_COMPILE by
relying on 7ed1c1901f ("tools: fix cross-compile var clobbering").
Same change was applied to tools/bpf/bpftool/Makefile in
9e88b9312a ("tools: bpftool: do not force gcc as CC").
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200609213506.3299-1-brett.mastbergen@gmail.com
When using make kselftest TARGETS=bpf, tools/bpf is built with
MAKEFLAGS=rR, which causes $(COMPILE.c) to be undefined, which in turn
causes the build to fail with
CC kselftest/bpf/tools/build/bpftool/map_perf_ring.o
/bin/sh: 1: -MMD: not found
Fix by using $(CC) $(CFLAGS) -c instead of $(COMPILE.c).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200602175649.2501580-2-iii@linux.ibm.com
Code for printing link attach_type is duplicated in a couple of places, and
likely will be duplicated for future link types as well. Create helpers to
prevent duplication.
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200531082846.2117903-8-jakub@cloudflare.com
btf__parse_raw and btf__parse_elf return negative error numbers wrapped
in an ERR_PTR, so the extracted value needs to be negated before passing
them to strerror which expects a positive error number.
Before:
Error: failed to load BTF from .../vmlinux: Unknown error -2
After:
Error: failed to load BTF from .../vmlinux: No such file or directory
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200525135421.4154-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Following the introduction of CAP_BPF, and the switch from CAP_SYS_ADMIN
to other capabilities for various BPF features, update the capability
checks (and potentially, drops) in bpftool for feature probes. Because
bpftool and/or the system might not know of CAP_BPF yet, some caution is
necessary:
- If compiled and run on a system with CAP_BPF, check CAP_BPF,
CAP_SYS_ADMIN, CAP_PERFMON, CAP_NET_ADMIN.
- Guard against CAP_BPF being undefined, to allow compiling bpftool from
latest sources on older systems. If the system where feature probes
are run does not know of CAP_BPF, stop checking after CAP_SYS_ADMIN,
as this should be the only capability required for all the BPF
probing.
- If compiled from latest sources on a system without CAP_BPF, but later
executed on a newer system with CAP_BPF knowledge, then we only test
CAP_SYS_ADMIN. Some probes may fail if the bpftool process has
CAP_SYS_ADMIN but misses the other capabilities. The alternative would
be to redefine the value for CAP_BPF in bpftool, but this does not
look clean, and the case sounds relatively rare anyway.
Note that libcap offers a cap_to_name() function to retrieve the name of
a given capability (e.g. "cap_sys_admin"). We do not use it because
deriving the names from the macros looks simpler than using
cap_to_name() (doing a strdup() on the string) + cap_free() + handling
the case of failed allocations, when we just want to use the name of the
capability in an error message.
The checks when compiling without libcap (i.e. root versus non-root) are
unchanged.
v2:
- Do not allocate cap_list dynamically.
- Drop BPF-related capabilities when running with "unprivileged", even
if we didn't have the full set in the first place (in v1, we would
skip dropping them in that case).
- Keep track of what capabilities we have, print the names of the
missing ones for privileged probing.
- Attempt to drop only the capabilities we actually have.
- Rename a couple variables.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010247.20654-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is a clean-up for the formatting of the do_help functions for
bpftool's subcommands. The following fixes are included:
- Do not use argv[-2] for "iter" help message, as the help is shown by
default if no "iter" action is selected, resulting in messages looking
like "./bpftool bpftool pin...".
- Do not print unused HELP_SPEC_PROGRAM in help message for "bpftool
link".
- Andrii used argument indexing to avoid having multiple occurrences of
bin_name and argv[-2] in the fprintf() for the help message, for
"bpftool gen" and "bpftool link". Let's reuse this for all other help
functions. We can remove up to thirty arguments for the "bpftool map"
help message.
- Harmonise all functions, e.g. use ending quotes-comma on a separate
line.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200523010751.23465-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make bpftool aware and add the new get{peer,sock}name attach types to its
cli, documentation and bash completion to allow attachment/detachment of
sock_addr programs there.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/9765b3d03e4c29210c4df56a9cc7e52f5f7bb5ef.1589841594.git.daniel@iogearbox.net
In Cilium we've recently switched to make use of bpf_jiffies64() for
parts of our tc and XDP datapath since bpf_ktime_get_ns() is more
expensive and high-precision is not needed for our timeouts we have
anyway. Our agent has a probe manager which picks up the json of
bpftool's feature probe and we also use the macro output in our C
programs e.g. to have workarounds when helpers are not available on
older kernels.
Extend the kernel config info dump to also include the kernel's
CONFIG_HZ, and rework the probe_kernel_image_config() for allowing a
macro dump such that CONFIG_HZ can be propagated to BPF C code as a
simple define if available via config. Latter allows to have _compile-
time_ resolution of jiffies <-> sec conversion in our code since all
are propagated as known constants.
Given we cannot generally assume availability of kconfig everywhere,
we also have a kernel hz probe [0] as a fallback. Potentially, bpftool
could have an integrated probe fallback as well, although to derive it,
we might need to place it under 'bpftool feature probe full' or similar
given it would slow down the probing process overall. Yet 'full' doesn't
fit either for us since we don't want to pollute the kernel log with
warning messages from bpf_probe_write_user() and bpf_trace_printk() on
agent startup; I've left it out for the time being.
[0] https://github.com/cilium/cilium/blob/master/bpf/cilium-probe-kernel-hz.c
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200513075849.20868-1-daniel@iogearbox.net
Bring minor improvements to bpftool documentation. Fix or harmonise
formatting, update map types (including in interactive help), improve
description for "map create", fix a build warning due to a missing line
after the double-colon for the "bpftool prog profile" example,
complete/harmonise/sort the list of related bpftool man pages in
footers.
v2:
- Remove (instead of changing) mark-up on "value" in bpftool-map.rst,
when it does not refer to something passed on the command line.
- Fix an additional typo ("hexadeximal") in the same file.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-3-quentin@isovalent.com
Replace the use of kernel-only integer typedefs (u8, u32, etc.) by their
user space counterpart (__u8, __u32, etc.).
Similarly to what libbpf does, poison the typedefs to avoid introducing
them again in the future.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-2-quentin@isovalent.com
runqslower doesn't specify include path for uapi/bpf.h. This causes the
following warning:
In file included from runqslower.c:10:
.../tools/testing/selftests/bpf/tools/include/bpf/bpf.h:234:38:
warning: 'enum bpf_stats_type' declared inside parameter list will not
be visible outside of this definition or declaration
234 | LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type);
Fix this by adding -I tools/includ/uapi to the Makefile.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, only one command is supported
bpftool iter pin <bpf_prog.o> <path>
It will pin the trace/iter bpf program in
the object file <bpf_prog.o> to the <path>
where <path> should be on a bpffs mount.
For example,
$ bpftool iter pin ./bpf_iter_ipv6_route.o \
/sys/fs/bpf/my_route
User can then do a `cat` to print out the results:
$ cat /sys/fs/bpf/my_route
fe800000000000000000000000000000 40 00000000000000000000000000000000 ...
00000000000000000000000000000000 00 00000000000000000000000000000000 ...
00000000000000000000000000000001 80 00000000000000000000000000000000 ...
fe800000000000008c0162fffebdfd57 80 00000000000000000000000000000000 ...
ff000000000000000000000000000000 08 00000000000000000000000000000000 ...
00000000000000000000000000000000 00 00000000000000000000000000000000 ...
The implementation for ipv6_route iterator is in one of subsequent
patches.
This patch also added BPF_LINK_TYPE_ITER to link query.
In the future, we may add additional parameters to pin command
by parameterizing the bpf iterator. For example, a map_id or pid
may be added to let bpf program only traverses a single map or task,
similar to kernel seq_file single_open().
We may also add introspection command for targets/iterators by
leveraging the bpf_iter itself.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200509175920.2477247-1-yhs@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-01 (v2)
The following pull-request contains BPF updates for your *net-next* tree.
We've added 61 non-merge commits during the last 6 day(s) which contain
a total of 153 files changed, 6739 insertions(+), 3367 deletions(-).
The main changes are:
1) pulled work.sysctl from vfs tree with sysctl bpf changes.
2) bpf_link observability, from Andrii.
3) BTF-defined map in map, from Andrii.
4) asan fixes for selftests, from Andrii.
5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub.
6) production cloudflare classifier as a selftes, from Lorenz.
7) bpf_ktime_get_*_ns() helper improvements, from Maciej.
8) unprivileged bpftool feature probe, from Quentin.
9) BPF_ENABLE_STATS command, from Song.
10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav.
11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs,
from Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The new libcap dependency is not used for an essential feature of
bpftool, and we could imagine building the tool without checks on
CAP_SYS_ADMIN by disabling probing features as an unprivileged users.
Make it so, in order to avoid a hard dependency on libcap, and to ease
packaging/embedding of bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-4-quentin@isovalent.com
There is demand for a way to identify what BPF helper functions are
available to unprivileged users. To do so, allow unprivileged users to
run "bpftool feature probe" to list BPF-related features. This will only
show features accessible to those users, and may not reflect the full
list of features available (to administrators) on the system.
To avoid the case where bpftool is inadvertently run as non-root and
would list only a subset of the features supported by the system when it
would be expected to list all of them, running as unprivileged is gated
behind the "unprivileged" keyword passed to the command line. When used
by a privileged user, this keyword allows to drop the CAP_SYS_ADMIN and
to list the features available to unprivileged users. Note that this
addsd a dependency on libpcap for compiling bpftool.
Note that there is no particular reason why the probes were restricted
to root, other than the fact I did not need them for unprivileged and
did not bother with the additional checks at the time probes were added.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-3-quentin@isovalent.com
The "full_mode" variable used for switching between full or partial
feature probing (i.e. with or without probing helpers that will log
warnings in kernel logs) was piped from the main do_probe() function
down to probe_helpers_for_progtype(), where it is needed.
Define it as a global variable: the calls will be more readable, and if
other similar flags were to be used in the future, we could use global
variables as well instead of extending again the list of arguments with
new flags.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-2-quentin@isovalent.com
Move attach_type_strings into main.h for access in non-cgroup code.
bpf_attach_type is used for non-cgroup attach types quite widely now. So also
complete missing string translations for non-cgroup attach types.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200429001614.1544-8-andriin@fb.com
- add SPDX header;
- adjust title markup;
- mark code blocks and literals as such;
- use footnote markup;
- mark tables as such;
- adjust identation, whitespaces and blank lines;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.
[0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com
In commit 65c9362859 ("bpftool: Add struct_ops support") a new
type of command named struct_ops has been added. This command requires
a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info
in bpftool, the helper get_btf_vmlinux() is used.
When running this command on kernel without BTF debug info, this will
lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by
this, btf_free() causes a segfault when executing 'bpftool struct_ops'.
This commit adds pointer validation with IS_ERR not to free invalid
pointer, and this will fix the segfault issue.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
This patch adds struct_ops support to the bpftool.
To recap a bit on the recent bpf_struct_ops feature on the kernel side:
It currently supports "struct tcp_congestion_ops" to be implemented
in bpf. At a high level, bpf_struct_ops is struct_ops map populated
with a number of bpf progs. bpf_struct_ops currently supports the
"struct tcp_congestion_ops". However, the bpf_struct_ops design is
generic enough that other kernel struct ops can be supported in
the future.
Although struct_ops is map+progs at a high lever, there are differences
in details. For example,
1) After registering a struct_ops, the struct_ops is held by the kernel
subsystem (e.g. tcp-cc). Thus, there is no need to pin a
struct_ops map or its progs in order to keep them around.
2) To iterate all struct_ops in a system, it iterates all maps
in type BPF_MAP_TYPE_STRUCT_OPS. BPF_MAP_TYPE_STRUCT_OPS is
the current usual filter. In the future, it may need to
filter by other struct_ops specific properties. e.g. filter by
tcp_congestion_ops or other kernel subsystem ops in the future.
3) struct_ops requires the running kernel having BTF info. That allows
more flexibility in handling other kernel structs. e.g. it can
always dump the latest bpf_map_info.
4) Also, "struct_ops" command is not intended to repeat all features
already provided by "map" or "prog". For example, if there really
is a need to pin the struct_ops map, the user can use the "map" cmd
to do that.
While the first attempt was to reuse parts from map/prog.c, it ended up
not a lot to share. The only obvious item is the map_parse_fds() but
that still requires modifications to accommodate struct_ops map specific
filtering (for the immediate and the future needs). Together with the
earlier mentioned differences, it is better to part away from map/prog.c.
The initial set of subcmds are, register, unregister, show, and dump.
For register, it registers all struct_ops maps that can be found in an
obj file. Option can be added in the future to specify a particular
struct_ops map. Also, the common bpf_tcp_cc is stateless (e.g.
bpf_cubic.c and bpf_dctcp.c). The "reuse map" feature is not
implemented in this patch and it can be considered later also.
For other subcmds, please see the man doc for details.
A sample output of dump:
[root@arch-fb-vm1 bpf]# bpftool struct_ops dump name cubic
[{
"bpf_map_info": {
"type": 26,
"id": 64,
"key_size": 4,
"value_size": 256,
"max_entries": 1,
"map_flags": 0,
"name": "cubic",
"ifindex": 0,
"btf_vmlinux_value_type_id": 18452,
"netns_dev": 0,
"netns_ino": 0,
"btf_id": 52,
"btf_key_type_id": 0,
"btf_value_type_id": 0
}
},{
"bpf_struct_ops_tcp_congestion_ops": {
"refcnt": {
"refs": {
"counter": 1
}
},
"state": "BPF_STRUCT_OPS_STATE_INUSE",
"data": {
"list": {
"next": 0,
"prev": 0
},
"key": 0,
"flags": 0,
"init": "void (struct sock *) bictcp_init/prog_id:138",
"release": "void (struct sock *) 0",
"ssthresh": "u32 (struct sock *) bictcp_recalc_ssthresh/prog_id:141",
"cong_avoid": "void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140",
"set_state": "void (struct sock *, u8) bictcp_state/prog_id:142",
"cwnd_event": "void (struct sock *, enum tcp_ca_event) bictcp_cwnd_event/prog_id:139",
"in_ack_event": "void (struct sock *, u32) 0",
"undo_cwnd": "u32 (struct sock *) tcp_reno_undo_cwnd/prog_id:144",
"pkts_acked": "void (struct sock *, const struct ack_sample *) bictcp_acked/prog_id:143",
"min_tso_segs": "u32 (struct sock *) 0",
"sndbuf_expand": "u32 (struct sock *) 0",
"cong_control": "void (struct sock *, const struct rate_sample *) 0",
"get_info": "size_t (struct sock *, u32, int *, union tcp_cc_info *) 0",
"name": "bpf_cubic",
"owner": 0
}
}
}
]
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171656.129650-1-kafai@fb.com
The kernel struct_ops obj has kernel's func ptrs implemented by bpf_progs.
The bpf prog_id is stored as the value of the func ptr for introspection
purpose. In the latter patch, a struct_ops dump subcmd will be added
to introspect these func ptrs. It is desired to print the actual bpf
prog_name instead of only printing the prog_id.
Since struct_ops is the only usecase storing prog_id in the func ptr,
this patch adds a prog_id_as_func_ptr bool (default is false) to
"struct btf_dumper" in order not to mis-interpret the ptr value
for the other existing use-cases.
While printing a func_ptr as a bpf prog_name,
this patch also prefix the bpf prog_name with the ptr's func_proto.
[ Note that it is the ptr's func_proto instead of the bpf prog's
func_proto ]
It reuses the current btf_dump_func() to obtain the ptr's func_proto
string.
Here is an example from the bpf_cubic.c:
"void (struct sock *, u32, u32) bictcp_cong_avoid/prog_id:140"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171650.129252-1-kafai@fb.com
A char[] is currently printed as an integer array.
This patch will print it as a string when
1) The array element type is an one byte int
2) The array element type has a BTF_INT_CHAR encoding or
the array element type's name is "char"
3) All characters is between (0x1f, 0x7f) and it is terminated
by a null character.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171643.129021-1-kafai@fb.com
This patch prints the enum's name if there is one found in
the array of btf_enum.
The commit 9eea984979 ("bpf: fix BTF verification of enums")
has details about an enum could have any power-of-2 size (up to 8 bytes).
This patch also takes this chance to accommodate these non 4 byte
enums.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200318171637.128862-1-kafai@fb.com
Commit fe4eb069ed ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf
to tools/bpf/bpftool. This is suboptimal with respect to a possible
stand-alone build of bpftool.
Fix this by moving tools/testing/selftests/bpf/include/uapi/linux/types.h
to tools/include/uapi/linux/types.h.
This requires an adjustment in the include search path order for the
tests in tools/testing/selftests/bpf so that tools/include/linux/types.h
is selected when building host binaries and
tools/include/uapi/linux/types.h is selected when building bpf binaries.
Verified by compiling bpftool and the bpf selftests on x86_64 with this
change.
Fixes: fe4eb069ed ("bpftool: Use linux/types.h from source tree for profiler build")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200313113105.6918-1-tklauser@distanz.ch
In commit 4a3d6c6a6e ("libbpf: Reduce log level for custom section
names"), log level for messages for libbpf_attach_type_by_name() and
libbpf_prog_type_by_name() was downgraded from "info" to "debug". The
latter function, in particular, is used by bpftool when attempting to
load programs, and this change caused bpftool to exit with no hint or
error message when it fails to detect the type of the program to load
(unless "-d" option was provided).
To help users understand why bpftool fails to load the program, let's do
a second run of the function with log level in "debug" mode in case of
failure.
Before:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
# echo $?
255
Or really verbose with -d flag:
# bpftool -d prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: loading sample_ret0.o
libbpf: section(1) .strtab, size 134, link 0, flags 0, type=3
libbpf: skip section(1) .strtab
libbpf: section(2) .text, size 16, link 0, flags 6, type=1
libbpf: found program .text
libbpf: section(3) .debug_abbrev, size 55, link 0, flags 0, type=1
libbpf: skip section(3) .debug_abbrev
libbpf: section(4) .debug_info, size 75, link 0, flags 0, type=1
libbpf: skip section(4) .debug_info
libbpf: section(5) .rel.debug_info, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_info(5) for section(4)
libbpf: section(6) .debug_str, size 150, link 0, flags 30, type=1
libbpf: skip section(6) .debug_str
libbpf: section(7) .BTF, size 155, link 0, flags 0, type=1
libbpf: section(8) .BTF.ext, size 80, link 0, flags 0, type=1
libbpf: section(9) .rel.BTF.ext, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.BTF.ext(9) for section(8)
libbpf: section(10) .debug_frame, size 40, link 0, flags 0, type=1
libbpf: skip section(10) .debug_frame
libbpf: section(11) .rel.debug_frame, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_frame(11) for section(10)
libbpf: section(12) .debug_line, size 74, link 0, flags 0, type=1
libbpf: skip section(12) .debug_line
libbpf: section(13) .rel.debug_line, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_line(13) for section(12)
libbpf: section(14) .symtab, size 96, link 1, flags 0, type=2
libbpf: looking for externs among 4 symbols...
libbpf: collected 0 externs total
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
After:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200311021205.9755-1-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Minor fixes for bash completion: addition of program name completion for
two subcommands, and correction for program test-runs and map pinning.
The completion for the following commands is fixed or improved:
# bpftool prog run [TAB]
# bpftool prog pin [TAB]
# bpftool map pin [TAB]
# bpftool net attach xdp name [TAB]
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-3-quentin@isovalent.com
Documentation and interactive help for bpftool have always explained
that the regular handles for programs (id|name|tag|pinned) and maps
(id|name|pinned) can be passed to the utility when attempting to pin
objects (bpftool prog pin PROG / bpftool map pin MAP).
THIS IS A LIE!! The tool actually accepts only ids, as the parsing is
done in do_pin_any() in common.c instead of reusing the parsing
functions that have long been generic for program and map handles.
Instead of fixing the doc, fix the code. It is trivial to reuse the
generic parsing, and to simplify do_pin_any() in the process.
Do not accept to pin multiple objects at the same time with
prog_parse_fds() or map_parse_fds() (this would require a more complex
syntax for passing multiple sysfs paths and validating that they
correspond to the number of e.g. programs we find for a given name or
tag).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200312184608.12050-2-quentin@isovalent.com
bpftool-prog-profile requires clang to generate BTF for global variables.
When compared with older clang, skip this command. This is achieved by
adding a new feature, clang-bpf-global-var, to tools/build/feature.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312182332.3953408-2-songliubraving@fb.com
When compiling bpftool on a system where the /usr/include/asm symlink
doesn't exist (e.g. on an Ubuntu system without gcc-multilib installed),
the build fails with:
CLANG skeleton/profiler.bpf.o
In file included from skeleton/profiler.bpf.c:4:
In file included from /usr/include/linux/bpf.h:11:
/usr/include/linux/types.h:5:10: fatal error: 'asm/types.h' file not found
#include <asm/types.h>
^~~~~~~~~~~~~
1 error generated.
make: *** [Makefile:123: skeleton/profiler.bpf.o] Error 1
This indicates that the build is using linux/types.h from system headers
instead of source tree headers.
To fix this, adjust the clang search path to include the necessary
headers from tools/testing/selftests/bpf/include/uapi and
tools/include/uapi. Also use __bitwise__ instead of __bitwise in
skeleton/profiler.h to avoid clashing with the definition in
tools/testing/selftests/bpf/include/uapi/linux/types.h.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200312130330.32239-1-tklauser@distanz.ch
Libbpf compiles and runs subset of selftests on each PR in its Github mirror
repository. To allow still building up-to-date selftests against outdated
kernel images, add back BPF_F_CURRENT_CPU definitions back.
N.B. BCC's runqslower version ([0]) doesn't need BPF_F_CURRENT_CPU due to use of
locally checked in vmlinux.h, generated against kernel with 1aae4bdd78 ("bpf:
Switch BPF UAPI #define constants used from BPF program side to enums")
applied.
[0] https://github.com/iovisor/bcc/pull/2809
Fixes: 367d82f17e (" tools/runqslower: Drop copy/pasted BPF_F_CURRENT_CPU definiton")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200311043010.530620-1-andriin@fb.com
_bpftool_get_map_names => _bpftool_get_prog_names for prog-attach|detach.
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-5-songliubraving@fb.com
With fentry/fexit programs, it is possible to profile BPF program with
hardware counters. Introduce bpftool "prog profile", which measures key
metrics of a BPF program.
bpftool prog profile command creates per-cpu perf events. Then it attaches
fentry/fexit programs to the target BPF program. The fentry program saves
perf event value to a map. The fexit program reads the perf event again,
and calculates the difference, which is the instructions/cycles used by
the target program.
Example input and output:
./bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
This command measures cycles and instructions for BPF program with id
337 for 3 seconds. The program has triggered 4228 times. The rest of the
output is similar to perf-stat. In this example, the counters were only
counting ~84% of the time because of time multiplexing of perf counters.
Note that, this approach measures cycles and instructions in very small
increments. So the fentry/fexit programs introduce noticeable errors to
the measurement results.
The fentry/fexit programs are generated with BPF skeletons. Therefore, we
build bpftool twice. The first time _bpftool is built without skeletons.
Then, _bpftool is used to generate the skeletons. The second time, bpftool
is built with skeletons.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200309173218.2739965-2-songliubraving@fb.com
With BPF_F_CURRENT_CPU being an enum, it is now captured in vmlinux.h and is
readily usable by runqslower. So drop local copy/pasted definition in favor of
the one coming from vmlinux.h.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200303003233.3496043-4-andriin@fb.com
Add canonical #ifndef/#define/#endif guard for generated vmlinux.h header with
__VMLINUX_H__ symbol. __VMLINUX_H__ is also going to play double role of
identifying whether vmlinux.h is being used, versus, say, BCC or non-CO-RE
libbpf modes with dependency on kernel headers. This will make it possible to
write helper macro/functions, agnostic to exact BPF program set up.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200229231112.1240137-2-andriin@fb.com
Update bash completion for "bpftool feature" command with the new
argument: "full".
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-5-mrostecki@opensuse.org
Update documentation of "bpftool feature" command with information about
new arguments: "full".
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-4-mrostecki@opensuse.org
Probes related to bpf_probe_write_user and bpf_trace_printk helpers emit
dmesg warnings which might be confusing for people running bpftool on
production environments. This change filters them out by default and
introduces the new positional argument "full" which enables all
available probes.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-3-mrostecki@opensuse.org
Remove all calls of print_end_then_start_section function and for loops
out from the do_probe function. Instead, provide separate functions for
each section (like i.e. section_helpers) which are called in do_probe.
This change is motivated by better readability.
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200226165941.6379-2-mrostecki@opensuse.org
Turns out the xlated program instructions can also be missing if
kptr_restrict sysctl is set. This means that the previous fix to check the
jited_prog_insns pointer was insufficient; add another check of the
xlated_prog_insns pointer as well.
Fixes: 5b79bcdf03 ("bpftool: Don't crash on missing jited insns or ksyms")
Fixes: cae73f2339 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com
Add missing dependency of $(BPFOBJ) to $(LIBBPF_SRC), so that running make
in runqslower/ will rebuild libbpf.a when there is change in libbpf/.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200204215037.2258698-1-songliubraving@fb.com
"HAVE" prefix is already applied by default to feature macros and before
this change, the large INSN limit macro had the incorrect name with
double "HAVE".
Fixes: 2faef64aa6 ("bpftool: Add misc section and probe for large INSN limit")
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200202110200.31024-1-mrostecki@opensuse.org
Fix undefined reference linker errors when building runqslower with
gcc 7.4.0 on Ubuntu 18.04.
The issue is with misplaced -lelf, -lz options in Makefile:
$(Q)$(CC) $(CFLAGS) -lelf -lz $^ -o $@
-lelf, -lz options should follow the list of target dependencies:
$(Q)$(CC) $(CFLAGS) $^ -lelf -lz -o $@
or after substitution
cc -g -Wall runqslower.o libbpf.a -lelf -lz -o runqslower
The current order of gcc params causes failure in libelf symbols resolution,
e.g. undefined reference to `elf_memory'
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Julia Kartseva <hex@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/908498f794661c44dca54da9e09dc0c382df6fcb.1580425879.git.hex@fb.com
tools/testing/selftests/bpf/Makefile supports overriding clang, llc and
other tools so that custom ones can be used instead of those from PATH.
It's convinient and heavily used by some users.
Apply same rules to runqslower/Makefile.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200124224142.1833678-1-rdna@fb.com
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-01-22
The following pull-request contains BPF updates for your *net-next* tree.
We've added 92 non-merge commits during the last 16 day(s) which contain
a total of 320 files changed, 7532 insertions(+), 1448 deletions(-).
The main changes are:
1) function by function verification and program extensions from Alexei.
2) massive cleanup of selftests/bpf from Toke and Andrii.
3) batched bpf map operations from Brian and Yonghong.
4) tcp congestion control in bpf from Martin.
5) bulking for non-map xdp_redirect form Toke.
6) bpf_send_signal_thread helper from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for specifying the libbpf include and object paths as
arguments to the runqslower Makefile, to support reusing the libbpf version
built as part of the selftests.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/157952561135.1683545.5660339645093141381.stgit@toke.dk
Since we are now consistently using the bpf/ prefix on #include directives,
we don't need to include tools/lib/bpf in the include path. Remove it to
make sure we don't inadvertently introduce new includes without the prefix.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952561027.1683545.1976265477926794138.stgit@toke.dk
Fix bpftool to include libbpf header files with the bpf/ prefix, to be
consistent with external users of the library. Also ensure that all
includes of exported libbpf header files (those that are exported on 'make
install' of the library) use bracketed includes instead of quoted.
To make sure no new files are introduced that doesn't include the bpf/
prefix in its include, remove tools/lib/bpf from the include path entirely,
and use tools/lib instead.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560684.1683545.4765181397974997027.stgit@toke.dk
Fix the runqslower tool to include libbpf header files with the bpf/
prefix, to be consistent with external users of the library. Also ensure
that all includes of exported libbpf header files (those that are exported
on 'make install' of the library) use bracketed includes instead of quoted.
To not break the build, keep the old include path until everything has been
changed to the new one; a subsequent patch will remove that.
Fixes: 6910d7d386 ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560457.1683545.9913736511685743625.stgit@toke.dk
The runqslower tool refuses to build without a file to read vmlinux BTF
from. The build fails with an error message to override the location by
setting the VMLINUX_BTF variable if autodetection fails. However, the
Makefile doesn't actually work with that override - the error message is
still emitted.
Fix this by including the value of VMLINUX_BTF in the expansion, and only
emitting the error message if the *result* is empty. Also permit running
'make clean' even though no VMLINUX_BTF is set.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157952560237.1683545.17771785178857224877.stgit@toke.dk
This patch makes bpftool support dumping a map's value properly
when the map's value type is a type of the running kernel's btf.
(i.e. map_info.btf_vmlinux_value_type_id is set instead of
map_info.btf_value_type_id). The first usecase is for the
BPF_MAP_TYPE_STRUCT_OPS.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230044.1103008-1-kafai@fb.com
This patch adds BPF_MAP_TYPE_STRUCT_OPS to "struct_ops" name mapping
so that "bpftool map show" can print the "struct_ops" map type
properly.
[root@arch-fb-vm1 bpf]# ~/devshare/fb-kernel/linux/tools/bpf/bpftool/bpftool map show id 8
8: struct_ops name dctcp flags 0x0
key 4B value 256B max_entries 1 memlock 4096B
btf_id 7
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200115230037.1102674-1-kafai@fb.com
The btf availability check is only done for plain text output.
It causes the whole BTF output went missing when json_output
is used.
This patch simplifies the logic a little by avoiding passing "int btf" to
map_dump().
For plain text output, the btf_wtr is only created when the map has
BTF (i.e. info->btf_id != 0). The nullness of "json_writer_t *wtr"
in map_dump() alone can decide if dumping BTF output is needed.
As long as wtr is not NULL, map_dump() will print out the BTF-described
data whenever a map has BTF available (i.e. info->btf_id != 0)
regardless of json or plain-text output.
In do_dump(), the "int btf" is also renamed to "int do_plain_btf".
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230025.1101828-1-kafai@fb.com
When testing a map has btf or not, maps_have_btf() tests it by actually
getting a btf_fd from sys_bpf(BPF_BTF_GET_FD_BY_ID). However, it
forgot to btf__free() it.
In maps_have_btf() stage, there is no need to test it by really
calling sys_bpf(BPF_BTF_GET_FD_BY_ID). Testing non zero
info.btf_id is good enough.
Also, the err_close case is unnecessary, and also causes double
close() because the calling func do_dump() will close() all fds again.
Fixes: 99f9863a0c ("bpftool: Match maps by name")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: Paul Chaignon <paul.chaignon@orange.com>
Link: https://lore.kernel.org/bpf/20200115230019.1101352-1-kafai@fb.com
Convert one of BCC tools (runqslower [0]) to BPF CO-RE + libbpf. It matches
its BCC-based counterpart 1-to-1, supporting all the same parameters and
functionality.
runqslower tool utilizes BPF skeleton, auto-generated from BPF object file,
as well as memory-mapped interface to global (read-only, in this case) data.
Its Makefile also ensures auto-generation of "relocatable" vmlinux.h, which is
necessary for BTF-typed raw tracepoints with direct memory access.
[0] 11bf5d02c8/tools/runqslower.py
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-6-andriin@fb.com
This patch makes structs and unions, emitted through BTF dump, automatically
CO-RE-relocatable (unless disabled with `#define BPF_NO_PRESERVE_ACCESS_INDEX`,
specified before including generated header file).
This effectivaly turns usual bpf_probe_read() call into equivalent of
bpf_core_read(), by automatically applying builtin_preserve_access_index to
any field accesses of types in generated C types header.
This is especially useful for tp_btf/fentry/fexit BPF program types. They
allow direct memory access, so BPF C code just uses straightfoward a->b->c
access pattern to read data from kernel. But without kernel structs marked as
CO-RE relocatable through preserve_access_index attribute, one has to enclose
all the data reads into a special __builtin_preserve_access_index code block,
like so:
__builtin_preserve_access_index(({
x = p->pid; /* where p is struct task_struct *, for example */
}));
This is very inconvenient and obscures the logic quite a bit. By marking all
auto-generated types with preserve_access_index attribute the above code is
reduced to just a clean and natural `x = p->pid;`.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200113073143.1779940-5-andriin@fb.com
For plain text output, it incorrectly prints the pointer value
"void *data". The "void *data" is actually pointing to memory that
contains a bpf-map's value. The intention is to print the content of
the bpf-map's value instead of printing the pointer pointing to the
bpf-map's value.
In this case, a member of the bpf-map's value is a pointer type.
Thus, it should print the "*(void **)data".
Fixes: 22c349e8db ("tools: bpftool: fix format strings and arguments for jsonw_printf()")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200110231644.3484151-1-kafai@fb.com
Introduce a new probe section (misc) for probes not related to concrete
map types, program types, functions or kernel configuration. Introduce a
probe for large INSN limit as the first one in that section.
Example outputs:
# bpftool feature probe
[...]
Scanning miscellaneous eBPF features...
Large program size limit is available
# bpftool feature probe macros
[...]
/*** eBPF misc features ***/
#define HAVE_HAVE_LARGE_INSN_LIMIT
# bpftool feature probe -j | jq '.["misc"]'
{
"have_large_insn_limit": true
}
Signed-off-by: Michal Rostecki <mrostecki@opensuse.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/20200108162428.25014-3-mrostecki@opensuse.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When auto-generated BPF skeleton C code is included from C++ application, it
triggers compilation error due to void * being implicitly casted to whatever
target pointer type. This is supported by C, but not C++. To solve this
problem, add explicit casts, where necessary.
To ensure issues like this are captured going forward, add skeleton usage in
test_cpp test.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191226210253.3132060-1-andriin@fb.com
Currently, when bpftool cgroup show <path> has an error, no error
message is printed. This is confusing because the user may think the
result is empty.
Before the change:
$ bpftool cgroup show /sys/fs/cgroup
ID AttachType AttachFlags Name
$ echo $?
255
After the change:
$ ./bpftool cgroup show /sys/fs/cgroup
Error: can't query bpf programs attached to /sys/fs/cgroup: Operation
not permitted
v2: Rename check_query_cgroup_progs to cgroup_has_attached_progs
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191224011742.3714301-1-hechaol@fb.com
Work-around what appears to be a bug in rst2man convertion tool, used to
create man pages out of reStructureText-formatted documents. If text line
starts with dot, rst2man will put it in resulting man file verbatim. This
seems to cause man tool to interpret it as a directive/command (e.g., `.bs`), and
subsequently not render entire line because it's unrecognized one.
Enclose '.xxx' words in extra formatting to work around.
Fixes: cb21ac5885 ("bpftool: Add gen subcommand manpage")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com
Link: https://lore.kernel.org/bpf/20191218221707.2552199-1-andriin@fb.com
Change format string referring to just single argument out of two available.
Some versions of libc can reject such format string.
Reported-by: Nikita Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218214314.2403729-1-andriin@fb.com
Add bpftool-gen.rst describing skeleton on the high level. Also include
a small, but complete, example BPF app (BPF side, userspace side, generated
skeleton) in example section to demonstrate skeleton API and its usage.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-4-andriin@fb.com
Embed contents of BPF object file used for BPF skeleton generation inside
skeleton itself. This allows to keep BPF object file and its skeleton in sync
at all times, and simpifies skeleton instantiation.
Also switch existing selftests to not require BPF_EMBED_OBJ anymore.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191218052552.2915188-2-andriin@fb.com
The ident variable has already been declared at the top of the function
and doesn't need to be re-declared.
Fixes: 985ead416d ("bpftool: Add skeleton codegen command")
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216112733.GA28366@Omicron
Add support for generation of mmap()-ed read-only view of libbpf-provided
extern variables. As externs are not supposed to be provided by user code
(that's what .data, .bss, and .rodata is for), don't mmap() it initially. Only
after skeleton load is performed, map .extern contents as read-only memory.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191214014710.3449601-4-andriin@fb.com
Add `bpftool gen skeleton` command, which takes in compiled BPF .o object file
and dumps a BPF skeleton struct and related code to work with that skeleton.
Skeleton itself is tailored to a specific structure of provided BPF object
file, containing accessors (just plain struct fields) for every map and
program, as well as dedicated space for bpf_links. If BPF program is using
global variables, corresponding structure definitions of compatible memory
layout are emitted as well, making it possible to initialize and subsequently
read/update global variables values using simple and clear C syntax for
accessing fields. This skeleton majorly improves usability of
opening/loading/attaching of BPF object, as well as interacting with it
throughout the lifetime of loaded BPF object.
Generated skeleton struct has the following structure:
struct <object-name> {
/* used by libbpf's skeleton API */
struct bpf_object_skeleton *skeleton;
/* bpf_object for libbpf APIs */
struct bpf_object *obj;
struct {
/* for every defined map in BPF object: */
struct bpf_map *<map-name>;
} maps;
struct {
/* for every program in BPF object: */
struct bpf_program *<program-name>;
} progs;
struct {
/* for every program in BPF object: */
struct bpf_link *<program-name>;
} links;
/* for every present global data section: */
struct <object-name>__<one of bss, data, or rodata> {
/* memory layout of corresponding data section,
* with every defined variable represented as a struct field
* with exactly the same type, but without const/volatile
* modifiers, e.g.:
*/
int *my_var_1;
...
} *<one of bss, data, or rodata>;
};
This provides great usability improvements:
- no need to look up maps and programs by name, instead just
my_obj->maps.my_map or my_obj->progs.my_prog would give necessary
bpf_map/bpf_program pointers, which user can pass to existing libbpf APIs;
- pre-defined places for bpf_links, which will be automatically populated for
program types that libbpf knows how to attach automatically (currently
tracepoints, kprobe/kretprobe, raw tracepoint and tracing programs). On
tearing down skeleton, all active bpf_links will be destroyed (meaning BPF
programs will be detached, if they are attached). For cases in which libbpf
doesn't know how to auto-attach BPF program, user can manually create link
after loading skeleton and they will be auto-detached on skeleton
destruction:
my_obj->links.my_fancy_prog = bpf_program__attach_cgroup_whatever(
my_obj->progs.my_fancy_prog, <whatever extra param);
- it's extremely easy and convenient to work with global data from userspace
now. Both for read-only and read/write variables, it's possible to
pre-initialize them before skeleton is loaded:
skel = my_obj__open(raw_embed_data);
my_obj->rodata->my_var = 123;
my_obj__load(skel); /* 123 will be initialization value for my_var */
After load, if kernel supports mmap() for BPF arrays, user can still read
(and write for .bss and .data) variables values, but at that point it will
be directly mmap()-ed to BPF array, backing global variables. This allows to
seamlessly exchange data with BPF side. From userspace program's POV, all
the pointers and memory contents stay the same, but mapped kernel memory
changes to point to created map.
If kernel doesn't yet support mmap() for BPF arrays, it's still possible to
use those data section structs to pre-initialize .bss, .data, and .rodata,
but after load their pointers will be reset to NULL, allowing user code to
gracefully handle this condition, if necessary.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-14-andriin@fb.com
Few libbpf APIs are not public but currently exposed through libbpf.h to be
used by bpftool. Move them to libbpf_internal.h, where intent of being
non-stable and non-public is much more obvious.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191214014341.3442258-4-andriin@fb.com
This patch implements lookup by name for maps and changes the behavior of
lookups by tag to be consistent with prog subcommands. Similarly to
program subcommands, the show and dump commands will return all maps with
the given name (or tag), whereas other commands will error out if several
maps have the same name (resp. tag).
When a map has BTF info, it is dumped in JSON with available BTF info.
This patch requires that all matched maps have BTF info before switching
the output format to JSON.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/8de1c9f273860b3ea1680502928f4da2336b853e.1576263640.git.paul.chaignon@gmail.com
When working with frequently modified BPF programs, both the ID and the
tag may change. bpftool currently doesn't provide a "stable" way to match
such programs.
This patch implements lookup by name for programs. The show and dump
commands will return all programs with the given name, whereas other
commands will error out if several programs have the same name.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Link: https://lore.kernel.org/bpf/b5fc1a5dcfaeb5f16fc80295cdaa606dd2d91534.1576263640.git.paul.chaignon@gmail.com
When several BPF programs have the same tag, bpftool matches only the
first (in ID order). This patch changes that behavior such that dump and
show commands return all matched programs. Commands that require a single
program (e.g., pin and attach) will error out if given a tag that matches
several. bpftool prog dump will also error out if file or visual are
given and several programs have the given tag.
In the case of the dump command, a program header is added before each
dump only if the tag matches several programs; this patch doesn't change
the output if a single program matches. The output when several
programs match thus looks as follows.
$ ./bpftool prog dump xlated tag 6deef7357e7b4530
3: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
4: cgroup_skb tag 6deef7357e7b4530 gpl
0: (bf) r6 = r1
[...]
7: (95) exit
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/fb1fe943202659a69cd21dd5b907c205af1e1e22.1576263640.git.paul.chaignon@gmail.com
When the kptr_restrict sysctl is set, the kernel can fail to return
jited_ksyms or jited_prog_insns, but still have positive values in
nr_jited_ksyms and jited_prog_len. This causes bpftool to crash when
trying to dump the program because it only checks the len fields not
the actual pointers to the instructions and ksyms.
Fix this by adding the missing checks.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Fixes: f84192ee00 ("tools: bpftool: resolve calls without using imm field")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210181412.151226-1-toke@redhat.com
Building selftests with 'make TARGETS=bpf kselftest' was fixed in commit
55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine
srctree"). However, by updating $(srctree) in tools/bpf/Makefile for
in-tree builds only, we leave out the case where we pass an output
directory to build BPF tools, but $(srctree) is not set. This
typically happens for:
$ make -s tools/bpf O=/tmp/foo
Makefile:40: /tools/build/Makefile.feature: No such file or directory
Fix it by updating $(srctree) in the Makefile not only for out-of-tree
builds, but also if $(srctree) is empty.
Detected with test_bpftool_build.sh.
Fixes: 55d554f5d1 ("tools: bpf: Use !building_out_of_srctree to determine srctree")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191119105626.21453-1-quentin.monnet@netronome.com
When building bpftool, a warning was introduced by commit a943646036
("bpftool: Allow to read btf as raw data"), because the return value
from a call to 'read()' is ignored. Let's address it.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191119111706.22440-1-quentin.monnet@netronome.com
When compiling larger programs with bpf_asm, it's possible to
accidentally exceed jt/jf range, in which case it won't complain, but
rather silently emit a truncated offset, leading to a "happy debugging"
situation.
Add a warning to help detecting such issues. It could be made an error
instead, but this might break compilation of existing code (which might
be working by accident).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107100349.88976-1-iii@linux.ibm.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The bpftool interface stays the same, but now it's possible
to run it over BTF raw data, like:
$ bpftool btf dump file /sys/kernel/btf/vmlinux
[1] INT '(anon)' size=4 bits_offset=0 nr_bits=32 encoding=(none)
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64 encoding=(none)
[3] CONST '(anon)' type_id=2
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Link: https://lore.kernel.org/bpf/20191024133025.10691-1-jolsa@kernel.org
LIBBPF_OPTS is implemented as a mix of field declaration and memset
+ assignment. This makes it neither variable declaration nor purely
statements, which is a problem, because you can't mix it with either
other variable declarations nor other function statements, because C90
compiler mode emits warning on mixing all that together.
This patch changes LIBBPF_OPTS into a strictly declaration of variable
and solves this problem, as can be seen in case of bpftool, which
previously would emit compiler warning, if done this way (LIBBPF_OPTS as
part of function variables declaration block).
This patch also renames LIBBPF_OPTS into DECLARE_LIBBPF_OPTS to follow
kernel convention for similar macros more closely.
v1->v2:
- rename LIBBPF_OPTS into DECLARE_LIBBPF_OPTS (Jakub Sitnicki).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20191022172100.3281465-1-andriin@fb.com
As part of libbpf in 5e61f27070 ("libbpf: stop enforcing kern_version,
populate it for users") non-LIBBPF_API __bpf_object__open_xattr() API
was removed from libbpf.h header. This broke bpftool, which relied on
that function. This patch fixes the build by switching to newly added
bpf_object__open_file() which provides the same capabilities, but is
official and future-proof API.
v1->v2:
- fix prog_type shadowing (Stanislav).
Fixes: 5e61f27070 ("libbpf: stop enforcing kern_version, populate it for users")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191007225604.2006146-1-andriin@fb.com
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In bpftool's Makefile, $(LIBS) includes $(LIBBPF), therefore the library
is used twice in the linking command. No need to have $(LIBBPF) (from
$^) on that command, let's do with "$(OBJS) $(LIBS)" (but move $(LIBBPF)
_before_ the -l flags in $(LIBS)).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When building "tools/bpf" from the top of the Linux repository, the
build system passes a value for the $(OUTPUT) Makefile variable to
tools/bpf/Makefile and tools/bpf/bpftool/Makefile, which results in
generating "libbpf/" (for bpftool) and "feature/" (bpf and bpftool)
directories inside the tree.
This commit adds such directories to the relevant .gitignore files, and
edits the Makefiles to ensure they are removed on "make clean". The use
of "rm" is also made consistent throughout those Makefiles (relies on
the $(RM) variable, use "--" to prevent interpreting
$(OUTPUT)/$(DESTDIR) as options.
v2:
- New patch.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are a number of alternative "make" invocations that can be used to
compile bpftool. The following invocations are expected to work:
- through the kbuild system, from the top of the repository
(make tools/bpf)
- by telling make to change to the bpftool directory
(make -C tools/bpf/bpftool)
- by building the BPF tools from tools/
(cd tools && make bpf)
- by running make from bpftool directory
(cd tools/bpf/bpftool && make)
Additionally, setting the O or OUTPUT variables should tell the build
system to use a custom output path, for each of these alternatives.
The following patch fixes the following invocations:
$ make tools/bpf
$ make tools/bpf O=<dir>
$ make -C tools/bpf/bpftool OUTPUT=<dir>
$ make -C tools/bpf/bpftool O=<dir>
$ cd tools/ && make bpf O=<dir>
$ cd tools/bpf/bpftool && make OUTPUT=<dir>
$ cd tools/bpf/bpftool && make O=<dir>
After this commit, the build still fails for two variants when passing
the OUTPUT variable:
$ make tools/bpf OUTPUT=<dir>
$ cd tools/ && make bpf OUTPUT=<dir>
In order to remember and check what make invocations are supposed to
work, and to document the ones which do not, a new script is added to
the BPF selftests. Note that some invocations require the kernel to be
configured, so the script skips them if no .config file is found.
v2:
- In make_and_clean(), set $ERROR to 1 when "make" returns non-zero,
even if the binary was produced.
- Run "make clean" from the correct directory (bpf/ instead of bpftool/,
when relevant).
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bpftool calls the toplevel Makefile to get the kernel version for the
sources it is built from. But when the utility is built from the top of
the kernel repository, it may dump the following error message for
certain architectures (including x86):
$ make tools/bpf
[...]
make[3]: *** [checkbin] Error 1
[...]
This does not prevent bpftool compilation, but may feel disconcerting.
The "checkbin" arch-dependent target is not supposed to be called for
target "kernelversion", which is a simple "echo" of the version number.
It turns out this is caused by the make invocation in tools/bpf/bpftool,
which attempts to find implicit rules to apply. Extract from debug
output:
Reading makefiles...
Reading makefile 'Makefile'...
Reading makefile 'scripts/Kbuild.include' (search path) (no ~ expansion)...
Reading makefile 'scripts/subarch.include' (search path) (no ~ expansion)...
Reading makefile 'arch/x86/Makefile' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kcov' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.gcc-plugins' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.kasan' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.extrawarn' (search path) (no ~ expansion)...
Reading makefile 'scripts/Makefile.ubsan' (search path) (no ~ expansion)...
Updating makefiles....
Considering target file 'scripts/Makefile.ubsan'.
Looking for an implicit rule for 'scripts/Makefile.ubsan'.
Trying pattern rule with stem 'Makefile.ubsan'.
[...]
Trying pattern rule with stem 'Makefile.ubsan'.
Trying implicit prerequisite 'scripts/Makefile.ubsan.o'.
Looking for a rule with intermediate file 'scripts/Makefile.ubsan.o'.
Avoiding implicit rule recursion.
Trying pattern rule with stem 'Makefile.ubsan'.
Trying rule prerequisite 'prepare'.
Trying rule prerequisite 'FORCE'.
Found an implicit rule for 'scripts/Makefile.ubsan'.
Considering target file 'prepare'.
File 'prepare' does not exist.
Considering target file 'prepare0'.
File 'prepare0' does not exist.
Considering target file 'archprepare'.
File 'archprepare' does not exist.
Considering target file 'archheaders'.
File 'archheaders' does not exist.
Finished prerequisites of target file 'archheaders'.
Must remake target 'archheaders'.
Putting child 0x55976f4f6980 (archheaders) PID 31743 on the chain.
To avoid that, pass the -r and -R flags to eliminate the use of make
built-in rules (and while at it, built-in variables) when running
command "make kernelversion" from bpftool's Makefile.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new subcommand to freeze maps from user space.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When listing maps, read their "frozen" status from procfs, and tell if
maps are frozen.
As commit log for map freezing command mentions that the feature might
be extended with flags (e.g. for write-only instead of read-only) in the
future, use an integer and not a boolean for JSON output.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a "btf list" (alias: "btf show") subcommand to bpftool in order to
dump all BTF objects loaded on a system.
When running the command, hash tables are built in bpftool to retrieve
all the associations between BTF objects and BPF maps and programs. This
allows for printing all such associations when listing the BTF objects.
The command is added at the top of the subcommands for "bpftool btf", so
that typing only "bpftool btf" also comes down to listing the programs.
We could not have this with the previous command ("dump"), which
required a BTF object id, so it should not break any previous behaviour.
This also makes the "btf" command behaviour consistent with "prog" or
"map".
Bash completion is updated to use "bpftool btf" instead of "bpftool
prog" to list the BTF ids, as it looks more consistent.
Example output (plain):
# bpftool btf show
9: size 2989B prog_ids 21 map_ids 15
17: size 2847B prog_ids 36 map_ids 30,29,28
26: size 2847B
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When showing metadata about a single program by invoking
"bpftool prog show PROG", the file descriptor referring to the program
is not closed before returning from the function. Let's close it.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some functions in bpftool have a "__printf()" format attributes to tell
the compiler they should expect printf()-like arguments. But because
these attributes are not used for the function prototypes in the header
files, the compiler does not run the checks everywhere the functions are
used, and some mistakes on format string and corresponding arguments
slipped in over time.
Let's move the __printf() attributes to the correct places.
Note: We add guards around the definition of GCC_VERSION in
tools/include/linux/compiler-gcc.h to prevent a conflict in jit_disasm.c
on GCC_VERSION from headers pulled via libbfd.
Fixes: c101189bc9 ("tools: bpftool: fix -Wmissing declaration warnings")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is one call to the p_err() function in detect_common_prefix()
where the message to print is passed directly as the first argument,
without using a format string. This is harmless, but may trigger
warnings if the "__printf()" attribute is used correctly for the p_err()
function. Let's fix it by using a "%s" format string.
Fixes: ba95c74524 ("tools: bpftool: add "prog run" subcommand to test-run programs")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The format string passed to one call to the p_err() function in
query_flow_dissector() does not match the value that should be printed,
resulting in some garbage integer being printed instead of
strerror(errno) if /proc/self/ns/net cannot be open. Let's fix the
format string.
Fixes: 7f0c57fec8 ("bpftool: show flow_dissector attachment status")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The last argument passed to one call to the p_err() function is not
correct, it should be "*argv" instead of "**argv". This may lead to a
segmentation fault error if BTF id cannot be parsed correctly. Let's fix
this.
Fixes: c93cc69004dt ("bpftool: add ability to dump BTF types")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are some mismatches between format strings and arguments passed to
jsonw_printf() in the BTF dumper for bpftool, which seems harmless but
may result in warnings if the "__printf()" attribute is used correctly
for jsonw_printf(). Let's fix relevant format strings and type cast.
Fixes: b12d6ec097 ("bpf: btf: add btf print functionality")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The last argument passed to some calls to the p_err() functions is not
correct, it should be "*argv" instead of "**argv". This may lead to a
segmentation fault error if CPU IDs or indices from the command line
cannot be parsed correctly. Let's fix this.
Fixes: f412eed9df ("tools: bpftool: add simple perf event output reader")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since, new sub-command 'net attach/detach' has been added for
attaching XDP program on interface,
this commit documents usage and sample output of `net attach/detach`.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds bash-completion for new "net attach/detach"
subcommand for attaching XDP program on interface.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By this commit, using `bpftool net detach`, the attached XDP prog can
be detached. Detaching the BPF prog will be done through libbpf
'bpf_set_link_xdp_fd' with the progfd set to -1.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By this commit, using `bpftool net attach`, user can attach XDP prog on
interface. New type of enum 'net_attach_type' has been made, as stat ted at
cover-letter, the meaning of 'attach' is, prog will be attached on interface.
With 'overwrite' option at argument, attached XDP program could be replaced.
Added new helper 'net_parse_dev' to parse the network device at argument.
BPF prog will be attached through libbpf 'bpf_set_link_xdp_fd'.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compile bpftool with $(EXTRA_WARNINGS), as defined in
scripts/Makefile.include, and fix the new warnings produced.
Simply leave -Wswitch-enum out of the warning list, as we have several
switch-case structures where it is not desirable to process all values
of an enum.
Remove -Wshadow from the warnings we manually add to CFLAGS, as it is
handled in $(EXTRA_WARNINGS).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpftool requires libelf, and zlib for decompressing /proc/config.gz.
zlib is a transitive dependency via libelf, and became mandatory since
elfutils 0.165 (Jan 2016). The feature check of libelf is already done
in the elfdep target of tools/lib/bpf/Makefile, pulled in by bpftool via
a dependency on libbpf.a. Add a similar feature check for zlib.
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
/proc/config has never existed as far as I can see, but /proc/config.gz
is present on Arch Linux. Add support for decompressing config.gz using
zlib which is a mandatory dependency of libelf anyway. Replace existing
stdio functions with gzFile operations since the latter transparently
handles uncompressed and gzip-compressed files.
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
No error message is currently printed if the pin syscall
itself fails. It got lost in the loadall refactoring.
Fixes: 77380998d9 ("bpftool: add loadall command")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Change an error message to work for any object being
pinned not just programs.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Takshak said in the original submission:
With different bpf attach_flags available to attach bpf programs specially
with BPF_F_ALLOW_OVERRIDE and BPF_F_ALLOW_MULTI, the list of effective
bpf-programs available to any sub-cgroups really needs to be available for
easy debugging.
Using BPF_F_QUERY_EFFECTIVE flag, one can get the list of not only attached
bpf-programs to a cgroup but also the inherited ones from parent cgroup.
So a new option is introduced to use BPF_F_QUERY_EFFECTIVE query flag here
to list all the effective bpf-programs available for execution at a specified
cgroup.
Reused modified test program test_cgroup_attach from tools/testing/selftests/bpf:
# ./test_cgroup_attach
With old bpftool:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/
ID AttachType AttachFlags Name
271 egress multi pkt_cntr_1
272 egress multi pkt_cntr_2
Attached new program pkt_cntr_4 in cg2 gives following:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
And with new "effective" option it shows all effective programs for cg2:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 effective
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
271 egress override pkt_cntr_1
272 egress override pkt_cntr_2
Compared to original submission use a local flag instead of global
option.
We need to clear query_flags on every command, in case batch mode
wants to use varying settings.
v2: (Takshak)
- forbid duplicated flags;
- fix cgroup path freeing.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
From commit 9df1c28bb7 ("bpf: add writable context for raw tracepoints"),
a new type of BPF_PROG, RAW_TRACEPOINT_WRITABLE has been added.
Since this BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE is not listed at
bpftool's header, it causes a segfault when executing 'bpftool feature'.
This commit adds BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE entry to
prog_type_name enum, and will eventually fixes the segfault issue.
Fixes: 9df1c28bb7 ("bpf: add writable context for raw tracepoints")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bash completion for proposing the "loadall" subcommand is missing. Let's
add it to the completion script.
Add a specific case to propose "load" and "loadall" for completing:
$ bpftool prog load
^ cursor is here
Otherwise, completion considers that $command is in load|loadall and
starts making related completions (file or directory names, as the
number of words on the command line is below 6), when the only suggested
keywords should be "load" and "loadall" until one has been picked and a
space entered after that to move to the next word.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Switch event_pipe implementation to rely on new libbpf perf buffer API
(it's raw low-level variant).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Michael reported crash with by bpf program in json mode on powerpc:
# bpftool prog -p dump jited id 14
[{
"name": "0xd00000000a9aa760",
"insns": [{
"pc": "0x0",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x4",
"operation": "nop",
"operands": [null
]
},{
"pc": "0x8",
"operation": "mflr",
Segmentation fault (core dumped)
The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.
Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.
Fixes: 107f041212 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new "bpftool prog run" subcommand to run a loaded program on input
data (and possibly with input context) passed by the user.
Print output data (and output context if relevant) into a file or into
the console. Print return value and duration for the test run into the
console.
A "repeat" argument can be passed to run the program several times in a
row.
The command does not perform any kind of verification based on program
type (Is this program type allowed to use an input context?) or on data
consistency (Can I work with empty input data?), this is left to the
kernel.
Example invocation:
# perl -e 'print "\x0" x 14' | ./bpftool prog run \
pinned /sys/fs/bpf/sample_ret0 \
data_in - data_out - repeat 5
0000000 0000 0000 0000 0000 0000 0000 0000 | ........ ......
Return value: 0, duration (average): 260ns
When one of data_in or ctx_in is "-", bpftool reads from standard input,
in binary format. Other formats (JSON, hexdump) might be supported (via
an optional command line keyword like "data_fmt_in") in the future if
relevant, but this would require doing more parsing in bpftool.
v2:
- Fix argument names for function check_single_stdin(). (Yonghong)
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-07-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix the interpreter to properly handle BPF_ALU32 | BPF_ARSH
on BE architectures, from Jiong.
2) Fix several bugs in the x32 BPF JIT for handling shifts by 0,
from Luke and Xi.
3) Fix NULL pointer deref in btf_type_is_resolve_source_only(),
from Stanislav.
4) Properly handle the check that forwarding is enabled on the device
in bpf_ipv6_fib_lookup() helper code, from Anton.
5) Fix UAPI bpf_prog_info fields alignment for archs that have 16 bit
alignment such as m68k, from Baruch.
6) Fix kernel hanging in unregister_netdevice loop while unregistering
device bound to XDP socket, from Ilya.
7) Properly terminate tail update in xskq_produce_flush_desc(), from Nathan.
8) Fix broken always_inline handling in test_lwt_seg6local, from Jiri.
9) Fix bpftool to use correct argument in cgroup errors, from Jakub.
10) Fix detaching dummy prog in XDP redirect sample code, from Prashant.
11) Add Jonathan to AF_XDP reviewers, from Björn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support sockopt prog type and cgroup hooks in the bpftool.
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cgroup code tries to use argv[0] as the cgroup path,
but if it fails uses argv[1] to report errors.
Fixes: 5ccda64d38 ("bpftool: implement cgroup bpf operations")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-06-19
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin.
2) BTF based map definition, from Andrii.
3) support bpf_map_lookup_elem for xskmap, from Jonathan.
4) bounded loops and scalar precision logic in the verifier, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 1 normalized pattern(s):
licensed under the gnu general public license version 2 0 gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 3 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.630925848@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly added bpf_num_possible_cpus() in bpftool and selftests
and remove duplicate implementations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-06-07
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial patch to bpftool in order to complete enabling attaching programs
to BPF_CGROUP_UDP{4,6}_RECVMSG.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In commit 9a5ab8bf1d ("tools: bpftool: turn err() and info() macros
into functions") one case of error reporting was special cased, so it
could report a lookup error for a specific key when dumping the map
element. What the code forgot to do is to wrap the key and value keys
into a JSON object, so an example output of pretty JSON dump of a
sockhash map (which does not support looking up its values) is:
[
"key": ["0x0a","0x41","0x00","0x02","0x1f","0x78","0x00","0x00"
],
"value": {
"error": "Operation not supported"
},
"key": ["0x0a","0x41","0x00","0x02","0x1f","0x78","0x00","0x01"
],
"value": {
"error": "Operation not supported"
}
]
Note the key-value pairs inside the toplevel array. They should be
wrapped inside a JSON object, otherwise it is an invalid JSON. This
commit fixes this, so the output now is:
[{
"key": ["0x0a","0x41","0x00","0x02","0x1f","0x78","0x00","0x00"
],
"value": {
"error": "Operation not supported"
}
},{
"key": ["0x0a","0x41","0x00","0x02","0x1f","0x78","0x00","0x01"
],
"value": {
"error": "Operation not supported"
}
}
]
Fixes: 9a5ab8bf1d ("tools: bpftool: turn err() and info() macros into functions")
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "-d" option is used to require all logs available for bpftool. So
far it meant telling libbpf to print even debug-level information. But
there is another source of info that can be made more verbose: when we
attemt to load programs with bpftool, we can pass a log_level parameter
to the verifier in order to control the amount of information that is
printed to the console.
Reuse the "-d" option to print all information the verifier can tell. At
this time, this means logs related to BPF_LOG_LEVEL1, BPF_LOG_LEVEL2 and
BPF_LOG_STATS. As mentioned in the discussion on the first version of
this set, these macros are internal to the kernel
(include/linux/bpf_verifier.h) and are not meant to be part of the
stable user API, therefore we simply use the related constants to print
whatever we can at this time, without trying to tell users what is
log_level1 or what is statistics.
Verifier logs are only used when loading programs for now (In the
future: for loading BTF objects with bpftool? Although libbpf does not
currently offer to print verifier info at debug level if no error
occurred when loading BTF objects), so bpftool.rst and bpftool-prog.rst
are the only man pages to get the update.
v3:
- Add details on log level and BTF loading at the end of commit log.
v2:
- Remove the possibility to select the log levels to use (v1 offered a
combination of "log_level1", "log_level2" and "stats").
- The macros from kernel header bpf_verifier.h are not used (and
therefore not moved to UAPI header).
- In v1 this was a distinct option, but is now merged in the only "-d"
switch to activate libbpf and verifier debug-level logs all at the
same time.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf has three levels of priority for output messages: warn, info,
debug. By default, debug output is not printed to the console.
Add a new "--debug" (short name: "-d") option to bpftool to print libbpf
logs for all three levels.
Internally, we simply use the function provided by libbpf to replace the
default printing function by one that prints logs regardless of their
level.
v2:
- Remove the possibility to select the log-levels to use (v1 offered a
combination of "warn", "info" and "debug").
- Rename option and offer a short name: -d|--debug.
- Add option description to all bpftool manual pages (instead of
bpftool-prog.rst only), as all commands use libbpf.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use fgets() as the while loop condition.
Signed-off-by: Chang-Hsien Tsai <luke.tw@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Auto-complete BTF IDs for `btf dump id` sub-command. List of possible BTF
IDs is scavenged from loaded BPF programs that have associated BTFs, as
there is currently no API in libbpf to fetch list of all BTFs in the
system.
Suggested-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Utilize new libbpf's btf_dump API to emit BTF as a C definitions.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kflag bit determines whether FWD is for struct or union. Use that bit.
Fixes: c93cc69004 ("bpftool: add ability to dump BTF types")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For a host which has a lower rlimit for max locked memory (e.g., 64KB),
the following error occurs in one of our production systems:
# /usr/sbin/bpftool prog load /paragon/pods/52877437/home/mark.o \
/sys/fs/bpf/paragon_mark_21 type cgroup/skb \
map idx 0 pinned /sys/fs/bpf/paragon_map_21
libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
Couldn't load basic 'r0 = 0' BPF program.
Error: failed to open object file
The reason is due to low locked memory during bpf_object__probe_name()
which probes whether program name is supported in kernel or not
during __bpf_object__open_xattr().
bpftool program load already tries to relax mlock rlimit before
bpf_object__load(). Let us move set_max_rlimit() before
__bpf_object__open_xattr(), which fixed the issue here.
Fixes: 47eff61777 ("bpf, libbpf: introduce bpf_object__probe_caps to test BPF capabilities")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds