Pointer variables of void * type do not require type cast.
Signed-off-by: wuych <yunchuan@nfschina.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now macsec on top of vlan can be offloaded to macsec offloading
devices so that VLAN tag is sent in clear text on wire i.e,
packet structure is DMAC|SMAC|VLAN|SECTAG. Offloading devices can
simply enable NETIF_F_HW_MACSEC feature in netdev->vlan_features for
this to work. But the logic in offloading drivers to retrieve the
private structure from netdev needs to be changed to check whether
the netdev received is real device or a vlan device and get private
structure accordingly. This patch changes the offloading drivers to
use helper macsec_netdev_priv instead of netdev_priv.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"ip link set dev "$devbond1" nomaster"
This line code in bond-eth-type-change.sh is unnecessary.
Because $devbond1 was not added to any master device.
Signed-off-by: Liang Li <liali@redhat.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since veth is very likely to be enabled and there are some drivers
(e.g. mlx5) where CONFIG_PAGE_POOL_STATS is optional, make
CONFIG_PAGE_POOL_STATS optional for veth too in order to keep it
optional instead of required.
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
net: lan966x: Add support for ES0 VCAP
Provide the Egress Stage 0 (ES0) VCAP (Versatile Content-Aware
Processor) support for the lan966x platform.
The ES0 VCAP has only 1 lookup which is accessible with a TC chain
id 10000000.
Currently only one action is support which is vlan pop. Also it is
possible to link the IS1 to ES0 using 'goto chain 10000000'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable the TC command to use the lan966x ES0 VCAP. Currently support
only one action which is vlan pop, other will be added later.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ES0 VCAP port keyset configuration for lan966x and also update
debugfs to show the keyset configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide ES0 (egress stage 0) VCAP model for lan966x.
This provides rewriting functionality in the gress path.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some DHCP server implementations only send the important requested DHCP
options in the final BOOTP reply (DHCPACK).
One example is systemd-networkd.
However, RFC2131, in section 4.3.1 states:
> The server MUST return to the client:
> [...]
> o Parameters requested by the client, according to the following
> rules:
>
> -- IF the server has been explicitly configured with a default
> value for the parameter, the server MUST include that value
> in an appropriate option in the 'option' field, ELSE
I've reported the issue here:
https://github.com/systemd/systemd/issues/27471
Linux PNP DHCP client implementation only takes into account the DNS
servers received in the first BOOTP reply (DHCPOFFER).
This usually isn't an issue as servers are required to put the same
values in the DHCPOFFER and DHCPACK.
However, RFC2131, in section 4.3.2 states:
> Any configuration parameters in the DHCPACK message SHOULD NOT
> conflict with those in the earlier DHCPOFFER message to which the
> client is responding. The client SHOULD use the parameters in the
> DHCPACK message for configuration.
When making Linux PNP DHCP client (cmdline ip=dhcp) interact with
systemd-networkd DHCP server, an interesting "protocol misunderstanding"
happens:
Because DNS servers were only specified in the DHCPACK and not in the
DHCPOFFER, Linux will not catch the correct DNS servers: in the first
BOOTP reply (DHCPOFFER), it sees that there is no DNS, and sets as
fallback the IP of the DHCP server itself. When the second BOOTP reply
comes (DHCPACK), it's already too late: the kernel will not overwrite
the fallback setting it has set previously.
This patch makes the kernel overwrite its DNS fallback by DNS servers
specified in the DHCPACK if any.
Signed-off-by: Martin Wetterwald <martin@wetterwald.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since veth_convert_skb_to_xdp_buff routine runs in veth_poll() NAPI,
rely on napi_build_skb() instead of build_skb() to reduce skb allocation
cost.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/0f822c0b72f8b71555c11745cb8fb33399d02de9.1683578488.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit af9bf70154 ("net: stmmac: add ethtool per-queue irq statistic
support") introduced ethtool per-queue statistics support to display
number of interrupts generated by DMA tx and DMA rx for DWMAC4 core.
This patch extend the support to XGMAC core.
Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230508144339.3014402-1-ji.sheng.teoh@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uwe Kleine-König says:
====================
net: stmmac: Convert to platform remove callback returning void
(implicit) v1 of this series is available at
https://lore.kernel.org/netdev/20230402143025.2524443-1-u.kleine-koenig@pengutronix.de
Changes since then:
- Added various Reviewed-by: and Acked-by: tags received for v1
- Removed a variable in an earlier patch to make all intermediate steps
compilable, spotted by Simon Horman
- Rebased to v6.4-rc1 (which needed a slight adaption to cope for
4bd3bb7b45 ("net: stmmac: Add glue layer for StarFive JH7110 SoC"))
====================
Link: https://lore.kernel.org/r/20230508142637.1449363-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The remove callback is only ever called after .probe() returned
successfully. After that get_stmmac_bsp_priv() always return non-NULL.
Side note: The early exit would also be a bug because the return value
of qcom_ethqos_remove() is ignored by the device core and the device is
unbound unconditionally. So exiting early resulted in a dangerous
resource leak as all devm allocated resources (some memory and the
register mappings) are freed but the network device stays around. Using
the network device afterwards probably oopses.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function returns zero unconditionally. Change it to return void
instead which simplifies one caller as error handing becomes
unnecessary.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.
The function is also used for some drivers as remove callback. Switch these
to the .remove_new() callback. For some others no error can happen in the
remove callback now, convert them to .remove_new(), too.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuan Zhuo says:
====================
virtio_net: refactor xdp codes
Due to historical reasons, the implementation of XDP in virtio-net
is relatively chaotic. For example, the processing of XDP actions
has two copies of similar code. Such as page, xdp_page processing, etc.
The purpose of this patch set is to refactor these code. Reduce the difficulty
of subsequent maintenance. Subsequent developers will not introduce new bugs
because of some complex logical relationships.
In addition, the supporting to AF_XDP that I want to submit later will
also need to reuse the logic of XDP, such as the processing of actions,
I don't want to introduce a new similar code. In this way, I can reuse
these codes in the future.
====================
Link: https://lore.kernel.org/r/20230508061417.65297-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This logic is used in multiple places, now we separate it into
a helper.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplifying receive_small() function. Bringing the logic relating to
build_skb together.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because the skb build code is not shared between xdp and non-xdp, and
the xdp code in receive_small() is simpler, so "skip_xdp" is not needed.
We can remove it.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid the problem that some variables(headroom and so on) will repeat
the calculation when process xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the case of XDP-PASS, skb_reserve uses the "delta" to compatible
non-XDP, now that is not shared between xdp and non-xdp, so we can
remove this logic.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of this patch is to simplify the receive_small().
Separate all the logic of XDP of small into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now, the logic of merge xdp process is simple, we can remove the
skip_xdp.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of this patch is to simplify the receive_mergeable().
Separate all the logic of XDP into a function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtnet_build_xdp_buff_mrg() auto release xdp shinfo then the caller no
need to careful the xdp shinfo.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduce a new function that frees the rest mergeable buf.
The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduce a new function that releases the
xdp shinfo. The subsequent patch will reuse this function.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At present, we have two similar logic to perform the XDP prog.
Therefore, this patch separates the code of executing XDP, which is
conducive to later maintenance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch, in order to facilitate review, I do not do any
modification. This patch has made some optimization on the top.
* remove some repeated logics in this function.
* add fast check for passing without any alloc.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separating the logic of preparation for xdp from receive_mergeable.
The purpose of this is to simplify the logic of execution of XDP.
The main logic here is that when headroom is insufficient, we need to
allocate a new page and calculate offset. It should be noted that if
there is new page, the variable page will refer to the new page.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the xdp implementation of virtio-net mergeable, it always checks
whether two page is used and a page is selected to release. This is
complicated for the processing of action, and be careful.
In the entire process, we have such principles:
* If xdp_page is used (PASS, TX, Redirect), then we release the old
page.
* If it is a drop case, we will release two. The old page obtained from
buf is release inside err_xdp, and xdp_page needs be relased by us.
But in fact, when we allocate a new page, we can release the old page
immediately. Then just one is using, we just need to release the new
page for drop case. On the drop path, err_xdp will release the variable
"page", so we only need to let "page" point to the new xdp_page in
advance.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c9929f0e34 ("mm/slob: remove CONFIG_SLOB") removes CONFIG_SLOB.
Now, we can also remove special handling for socket buffers with the SLOB
allocator. The code with HAVE_SKB_SMALL_HEAD_CACHE=1 is now the default
behavior for all allocators.
Remove an unnecessary distinction between SLOB and SLAB/SLUB allocator
after the SLOB allocator is gone.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509071207.28942-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid reading link modes from management firmware every time when
`ethtool_get_link_ksettings` is called, only communicate with
management firmware when necessary like we do for eth_table info.
This change can ease the situation that when large number of vlan
sub-interfaces are created and their information is requested by
some monitoring process like PCP [1] through ethool ioctl frequently.
[1] https://pcp.io
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230509075817.10566-1-louis.peens@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The DP83869 PHY on TI's k3-am642-evm supports both MII and RGMII
interfaces and is configured by default to use RGMII interface (strap).
However, the board design allows switching dynamically to MII interface
for testing purposes by applying different set of pinmuxes.
To support switching to MII interface, update the DP83869 PHY driver to
configure OP_MODE_DECODE.RGMII_MII_SEL(bit 5) properly when MII PHY
interface mode is requested.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230508070359.357474-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 0da6e5fd6c ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.
As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.
Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmRVUlMACgkQ+vtdtY28
YcORHhAAsRsKpJ4pq/R978It4v5R4iTvSvdpinxxpuW2WGfF8SD6XGZW6ursIlTZ
y2VaT8k/1t3A8Q2vNDnT8aigNv0TkQiKs6rGYJFl2G+F5zUj0jwwrZNh7s2F2TuE
LSB3Mt/YLEo2d1J+SwTKKsBlN5qwDrlON5fCtEz4nBmszLsJiaWMkUAgCD5zLJPu
iPalGKBez5iOshIjtpAtnbjy4w5iMl2WzCQAtmLS1E0FUclj0cbtcBnLNqQTb0kQ
LynQpoK8ccjVaRJSm4S6nRsOyeczZ5tD1A/jzHzhdwt701f668qhuGZy8coeWPM7
ZPgQf3R4KIml/CsiU2lh6t4A/CQ5w0+AcAh9bUp/PgUpHmy8qRIYtCEGcdIUoxea
S/gn26rbzoJnyGq2WU6gy8kNGi1fmvb8iok0PnHZMDKzpxHgKzUec5gnNfO4zQyX
lzoxlSdAen7qsHe7rpOF4iwIcbzy3yWpEmojInpMcx9hNn7waSx559+sBisj4jhh
0HE8s+N5BYiFV87njst9F1yqu9x2yVOTjIgLaXzsvO258g18QI66uxIjkFyXbJD1
dJoX/rrM7hoeJVmjp7vSSdWGFVY1/AHiIeqxVTtZWSt1ri7WT7jfxL8axZtgZoi1
D6nxgGkpdHks+MH9S5NFI4bKYIgE9RlTYQ9gB282krrTkeuc2/Q=
=/lCA
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Add Conor Dooley as a DT binding maintainer
- Swap the order of parsing /memreserve/ and /reserved-memory nodes so
that the /reserved-memory nodes which have more information are
handled first
- Fix some property dependencies in riscv,pmu binding
- Update maintainers entries on a couple of bindings
* tag 'devicetree-fixes-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
MAINTAINERS: add Conor as a dt-bindings maintainer
dt-bindings: perf: riscv,pmu: fix property dependencies
dt-bindings: xilinx: Remove Naga from memory and mtd bindings
of: fdt: Scan /memreserve/ last
dt-bindings: clock: r9a06g032-sysctrl: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzv2m: Change maintainer to Fabrizio Castro
dt-bindings: pinctrl: renesas,rzn1: Change maintainer to Fabrizio Castro
dt-bindings: i2c: renesas,rzv2m: Change maintainer to Fabrizio Castro
translation that has been ready for some time but got applied late.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmRT2nkACgkQF0NaE2wM
flglRwf/fLxKnCmh/j6zVjXVjb00UWj9NV5ZmrrnFxU+ajyzejoiKeyYvXcdiKKp
R1PpVJPF9ZO2DQ43QEj01SAl3qyMKWbvbISg5L/btOQtV563h7zktyjULOai7UfF
6+svqWi2Cl0gqdix3AVICZryRYBNBY62PeIWcWka+VXmMGCijwLf/jRRXwNa/7kf
kye9C5UG01uGauAw2t4Ol/jbIsZa4ID9FiUHJI/aQfLCgqVVO9pVQXA1igDF743Y
vt4IGX4qsjKGsAAOMWfieFGozcCwQsc01hC2usa8yx36ov6EBT79hmoWMWHsLeHJ
NcLfF7LZCJNUD3g+c1hLhfjjYMufaw==
=dljY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.4-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving documentation fixes, plus one Spanish
translation that has been ready for some time but got applied late"
* tag 'docs-6.4-2' of git://git.lwn.net/linux:
docs/sp_SP: Add translation of process/adding-syscalls
CREDITS: Update email address for Mat Martineau
Documentation: update kernel stack for x86_64
docs: Remove unnecessary unicode character
docs: fix "Reviewd" typo
Documentation: timers: hrtimers: Make hybrid union historical
docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
doc:it_IT: fix some typos
- Make buffer_percent read/write. The buffer_percent file is how users can
state how long to block on the tracing buffer depending on how much
is in the buffer. When it hits the "buffer_percent" it will wake the
task waiting on the buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without SELinux,
but with SELinux it will prevent even root to write to it without having
CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented. That was to show what functions
were not only touched, but had either a direct trampoline attached to
it, or a kprobe or live kernel patching that can "hijack" the function
to run a different function. The point is to know if there's functions
in the kernel that may not be behaving as the kernel code shows. This can
be used for debugging. TODO: Add this information to kernel oops too.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZFUcrxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgOoAP0U2R6+jvA2ehQFb0UTCH9wEu2uEELA
g2CkdPNdn6wJjAD+O1+v5nVkqSpsArjHOhv5OGYrgh+VSXK3Z8EpQ9vUVgg=
=nfoh
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing updates from Steven Rostedt:
- Make buffer_percent read/write.
The buffer_percent file is how users can state how long to block on
the tracing buffer depending on how much is in the buffer. When it
hits the "buffer_percent" it will wake the task waiting on the
buffer. For some reason it was set to read-only.
This was not noticed because testing was done as root without
SELinux, but with SELinux it will prevent even root to write to it
without having CAP_DAC_OVERRIDE.
- The "touched_functions" was added this merge window, but one of the
reasons for adding it was not implemented.
That was to show what functions were not only touched, but had either
a direct trampoline attached to it, or a kprobe or live kernel
patching that can "hijack" the function to run a different function.
The point is to know if there's functions in the kernel that may not
be behaving as the kernel code shows. This can be used for debugging.
TODO: Add this information to kernel oops too.
* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
tracing: Fix permissions for the buffer_percent file
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code.
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation.
- Misc cleanups/fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mM0A
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
wuych