Useful for driver specific LRU handling.
v2: fix typo in comment
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When we use an extern reservation object that otherwise waits for every
fence registered with it.
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
TTM BO accounting is out of sync with how memory is really allocated
in ttm[_dma]_tt_alloc_page_directory. This resulted in excessive
estimated overhead with many small allocations.
ttm_dma_tt_alloc_page_directory makes a single allocation for three
arrays: pages, DMA and CPU addresses. It uses drm_calloc_large, which
uses kmalloc internally for allocations smaller than PAGE_SIZE.
ttm_round_pot should be a good approximation of its memory usage both
above and below PAGE_SIZE.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following scenario:
1. Page table bo allocated in vram and linked to man->lru.
tbo->list_kref.refcount=2
2. Page table bo is swapped out and removed from man->lru.
tbo->list_kref.refcount=1
3. Command submission from userspace. Page table bo is moved
to vram. ttm_bo_move_to_lru_tail() link it to man->lru and
don't increase the kref count.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This allows the drivers to move a BO to the end of the LRU
without removing and adding it again.
v2: Make it more robust, handle pinned and swapable BOs as well.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't make any sense to try to swap out imported BOs.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we import a BO with an external reservation object we don't
reserve/unreserve it. So we never add it to the LRU causing a possible
denial of service.
v2: fix typo in commit message
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the event that TTM doesn't find a compatible memory type for the
driver's first placement choice (placement without eviction), TTM
returns -EINVAL without trying the driver's second choice.
This causes problems on vmwgfx when VRAM is disabled before first modeset
and during VT switches when fbdev is not enabled.
Fix this by also trying the driver's second choice before returning
-EINVAL.
v2: Also check that man->use_type is true for the driver's second choice.
Fixes a bug where disallowed memory types could be used.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We need to store device offsets in 64 bit as the device
address space may be larger than the CPU's.
Fixes GPU init failures on radeons with 4GB or more of
vram on 32 bit kernels. We put vram at the start of the
GPU's address space so the gart aperture starts at 4 GB
causing all GPU addresses in the gart aperture to get
truncated.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89072
[airlied: fix warning on nouveau build]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: thellstrom@vmware.com
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The radeon driver uses placement range restrictions for several reasons,
in particular to make sure BOs in VRAM can be accessed by the CPU, e.g.
during a page fault.
Without this change, TTM could evict other BOs while trying to satisfy
the requested placement, even if the evicted BOs were outside of the
requested placement range. Doing so didn't free up any space in the
requested placement range, so the (potentially high) eviction cost was
incurred for no benefit.
Nominating for stable because radeon driver changes in 3.17 made this
much more noticeable than before.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84662
Cc: stable@vger.kernel.org
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No users are left, kill it off! :D
Conversion to the reservation api is next on the list, after
that the functionality can be restored with rcu.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
This is the last remaining function that doesn't use the reservation
lock completely to fence off access to a buffer.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
This allows us to more fine grained specify where to place the buffer object.
v2: rebased on drm-next, add bochs changes as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fix a sparse warning: ttm_bo_reserve()'s last argument is a
pointer to a struct, so use NULL as nullpointer.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
bo->mem.placement is not initialized when ttm_bo_man_get_node is called,
so the flag had no effect at all.
v2: change nouveau and vmwgfx as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the 3rd respin of the drm-anon patches. They allow module unloading, use
the pin_fs_* helpers recommended by Al and are rebased on top of drm-next. Note
that there are minor conflicts with the "drm-minor" branch.
* 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux:
drm: init TTM dev_mapping in ttm_bo_device_init()
drm: use anon-inode instead of relying on cdevs
drm: add pseudo filesystem for shared inodes
With dev->anon_inode we have a global address_space ready for operation
right from the beginning. Therefore, there is no need to do a delayed
setup with TTM. Instead, set dev_mapping during initialization in
ttm_bo_device_init() and remove any "if (dev_mapping)" conditions.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Mark function as static because it is not used outside file
drm/ttm/ttm_bo.c.
This eliminates the following warning in drm/ttm/ttm_bo.c:
drivers/gpu/drm/ttm/ttm_bo.c:960:5: warning: no previous prototype for ‘ttm_bo_move_buffer’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Addresses
"[BUG] completely bonkers use of set_need_resched + VM_FAULT_NOPAGE".
In the first occurence it was used to try to be nice while releasing the
mmap_sem and retrying the fault to work around a locking inversion.
The second occurence was never used.
There has been some discussion whether we should change the locking order to
mmap_sem -> bo_reserve. This patch doesn't address that issue, and leaves
that locking order undefined. The solution that we release the mmap_sem if
tryreserve fails and wait for the buffer to become unreserved is something
we want in any case, and follows how the core vm system waits for pages
to be come unlocked while releasing the mmap_sem.
The code also outlines what needs to be changed if we want to establish the
locking order as mmap_sem -> bo::reserve.
One slight issue that remains with this code is that the fault handler might
be prone to starvation if another thread countinously reserves the buffer.
IMO that usage pattern is highly unlikely.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Also check the busy placements before deciding to move a buffer object.
Failing to do this may result in a completely unneccessary move within a
single memory type.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
NO_EVICT bos that are not idle when all references are dropped are put on
the delayed destroy list. However, since they are not on LRU lists, they
are not available to shrinkers at that point, and buffers on the delayed
destroy list are not checked very often for idle.
So when these buffers are put on the delayed destroy list, clear the
NO_EVICT flag and put them on the right LRU list. This way they are
immediately available for eviction or shrinkers and will not cause false
OOMS.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This helper is used only once and just wraps a call to
drm_vma_offset_add(). Remove this unneeded indirection to safe 10 lines of
code.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Instead of unmapping the nodes in TTM and GEM users manually, we provide
a generic wrapper which does the correct thing for all vma-nodes.
v2: remove bdev->dev_mapping test in ttm_bo_unmap_virtual_unlocked() as
ttm_mem_io_free_vm() does nothing in that case (io_reserved_vm is 0).
v4: Fix docbook comments
v5: use drm_vma_node_size()
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Use the new vma-manager infrastructure. This doesn't change any
implementation details as the vma-offset-manager is nearly copied 1-to-1
from TTM.
The vm_lock is moved into the offset manager so we can drop it from TTM.
During lookup, we use the vma locking helpers to take a reference to the
found object.
In all other scenarios, locking stays the same as before. We always
guarantee that drm_vma_offset_remove() is called only during destruction.
Hence, helpers like drm_vma_node_offset_addr() are always safe as long as
the node has a valid offset.
This also drops the addr_space_offset member as it is a copy of vm_start
in vma_node objects. Use the accessor functions instead.
v4:
- remove vm_lock
- use drm_vma_offset_lock_lookup() to protect lookup (instead of vm_lock)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Martin Peres <martin.peres@labri.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
There is no reason to return "int" as this function never fails.
Furthermore, several drivers (ast, sis) already depend on this.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now that the code is compatible in semantics, flip the switch.
Use ww_mutex instead of the homegrown implementation.
ww_mutex uses -EDEADLK to signal that the caller has to back off,
and -EALREADY to indicate this buffer is already held by the caller.
ttm used -EAGAIN and -EDEADLK for those, respectively. So some changes
were needed to handle this correctly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TTM reservations changes, preparing for new reservation mutex system.
* 'for-airlied' of git://people.freedesktop.org/~mlankhorst/linux:
drm/ttm: unexport ttm_bo_wait_unreserved
drm/nouveau: use ttm_bo_reserve_slowpath in validate_init, v2
drm/ttm: use ttm_bo_reserve_slowpath_nolru in ttm_eu_reserve_buffers, v2
drm/ttm: add ttm_bo_reserve_slowpath
drm/ttm: cleanup ttm_eu_reserve_buffers handling
drm/ttm: remove lru_lock around ttm_bo_reserve
drm/nouveau: increase reservation sequence every retry
drm/vmwgfx: always use ttm_bo_is_reserved
if we have a move notify callback, when moving fails, we call move notify
the opposite way around, however this ends up with *mem containing the mm_node
from the bo, which means we double free it. This is a follow on to the previous
fix.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All legitimate users of this function outside ttm_bo.c are gone, now
it's only an implementation detail.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Instead of dropping everything, waiting for the bo to be unreserved
and trying over, a better strategy would be to do a blocking wait.
This can be mapped a lot better to a mutex_lock-like call.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
There should no longer be assumptions that reserve will always succeed
with the lru lock held, so we can safely break the whole atomic
reserve/lru thing. As a bonus this fixes most lockdep annotations for
reservations.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
All items on the lru list are always reservable, so this is a stupid
thing to keep. Not only that, it is used in a way which would
guarantee deadlocks if it were ever to be set to block on reserve.
This is a lot of churn, but mostly because of the removal of the
argument which can be nested arbitrarily deeply in many places.
No change of code in this patch except removal of the no_wait_reserve
argument, the previous patch removed the use of no_wait_reserve.
v2:
- Warn if -EBUSY is returned on reservation, all objects on the list
should be reservable. Adjusted patch slightly due to conflicts.
v3:
- Focus on no_wait_reserve removal only.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replace the goto loop with a simple for each loop, and only run the
delayed destroy cleanup if we can reserve the buffer first.
No race occurs, since lru lock is never dropped any more. An empty list
and a list full of unreservable buffers both cause -EBUSY to be returned,
which is identical to the previous situation, because previously buffers
on the lru list were always guaranteed to be reservable.
This should work since currently ttm guarantees items on the lru are
always reservable, and reserving items blockingly with some bo held
are enough to cause you to run into a deadlock.
Currently this is not a concern since removal off the lru list and
reservations are always done with atomically, but when this guarantee
no longer holds, we have to handle this situation or end up with
possible deadlocks.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replace the while loop with a simple for each loop, and only run the
delayed destroy cleanup if we can reserve the buffer first.
No race occurs, since lru lock is never dropped any more. An empty list
and a list full of unreservable buffers both cause -EBUSY to be returned,
which is identical to the previous situation.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
By removing the unlocking of lru and retaking it immediately, a race is
removed where the bo is taken off the swap list or the lru list between
the unlock and relock. As such the cleanup_refs code can be simplified,
it will attempt to call ttm_bo_wait non-blockingly, and if it fails
it will drop the locks and perform a blocking wait, or return an error
if no_wait_gpu was set.
The need for looping is also eliminated, since swapout and evict_mem_first
will always follow the destruction path, no new fence is allowed
to be attached. As far as I can see this may already have been the case,
but the unlocking / relocking required a complicated loop to deal with
re-reservation.
Changes since v1:
- Simplify no_wait_gpu case by folding it in with empty ddestroy.
- Hold a reservation while calling ttm_bo_cleanup_memtype_use again.
Changes since v2:
- Do not remove bo from lru list while waiting
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This requires changing the order in ttm_bo_cleanup_refs_or_queue to
take the reservation first, as there is otherwise no race free way to
take lru lock before fence_lock.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Removes the need for a write lock each time we call ttm_bo_unref().
v2: Remove an unused variable.
v3: Really remove the unused variable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is similar to other platforms that don't allow command submission
to buffers locked on the cpu.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reservation locking currently always takes place under the LRU spinlock.
Hence, strictly there is no need for an atomic_cmpxchg call; we can use
atomic_read followed by atomic_write since nobody else will ever reserve
without the lru spinlock held.
At least on Intel this should remove a locked bus cycle on successful
reserve.
Note that thit commit may be obsoleted by the cross-device reservation work.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
vmwgfx was its only user and always sets it to the same..
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-By: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It's unused.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All drivers set it to 0 and nothing uses it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In theory, that function could release the lru lock between
checking for bo on ddestroy list and a successful reserve if the bo
was already reserved, and the function was called with waiting reserves
allowed.
However, all current reservers of a bo on the ddestroy list would
atomically take the bo off the list after a successful reserve so this
race should not have been hit, so no need to backport for stable.
This patch also fixes a case found by Maarten Lankhorst where
ttm_mem_evict_first called with no_wait_gpu would incorrectly
spin waiting for bo idle if trying to evict a busy buffer that
also sits on the ddestroy list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The ttm_mem_evict_first function could theoretically drop the
lru lock without retrying if a reservation from off the LRU list
ended up waiting.
However, since currently there are no users that could cause a wait
in that situation so this is not suitable for stable
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
A regression was introduced in the 3.3 rc series, commit
"drm/ttm: simplify memory accounting for ttm user v2",
causing the metadata of buffer objects created using the ttm_bo_create()
function to be accounted twice.
That causes massive leaks with the vmwgfx driver running for example
SpecViewperf Catia-03 test 2, eventually killing the app.
Furthermore, the same commit introduces a regression where
metadata accounting is leaked if a buffer object is
initialized with an illegal size. This is also fixed with this commit.
v2: Fixed an error path and removed an unused variable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This imbalance may cause hangs when TTM is trying to swap out a buffer
that is already on the delayed delete list.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds the ability for ttm common code to take an SG table
and use it as the backing for a slave TTM object.
The drivers can then populate their GTT tables using the SG object.
v2: make sure to setup VM for sg bos as well.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use the more current logging style.
Add pr_fmt and remove the TTM_PFX uses.
Coalesce formats and align arguments.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Both changes in dc97b3409a cause serious
regressions in the nouveau driver.
move_notify() was originally able to presume that bo->mem is the old node,
and new_mem is the new node. The above commit moves the call to
move_notify() to after move() has been done, which means that now, sometimes,
new_mem isn't the new node at all, bo->mem is, and new_mem points at a
stale, possibly-just-been-killed-by-move node.
This is clearly not a good situation. This patch reverts this change, and
replaces it with a cleanup in the move() failure path instead.
The second issue is that the call to move_notify() from cleanup_memtype_use()
causes the TTM ghost objects to get passed into the driver. This is clearly
bad as the driver knows nothing about these "fake" TTM BOs, and ends up
accessing uninitialised memory.
I worked around this in nouveau's move_notify() hook by ensuring the BO
destructor was nouveau's. I don't particularly like this solution, and
would rather TTM never pass the driver these objects. However, I don't
clearly understand the reason why we're calling move_notify() here anyway
and am happy to work around the problem in nouveau instead of breaking the
behaviour expected by other drivers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Merge in the upstream tree to bring in the mainline fixes.
Conflicts:
drivers/gpu/drm/exynos/exynos_drm_fbdev.c
drivers/gpu/drm/nouveau/nouveau_sgdma.c
Previously we were calling back move_notify in error path when the
bo is returned to it's original position or when destroy the bo.
When destroying the bo set the new mem placement as NULL when calling
back in the driver.
Updating nouveau to deal with NULL placement properly.
v2: reserve the object before calling move_notify in bo destroy path
at that point ttm should be the only piece of code interacting
with the object so atomic_set is safe here.
v3: callback move notify only once the bo is in its new position
call move notify want swaping out the buffer
v4:- don't call move_notify when swapin out bo, assume driver should
do what is appropriate in swap notify
- move move_notify call back to ttm_bo_cleanup_memtype_use for
destroy path
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Provide helper function to compute the kernel memory size needed
for each buffer object. Move all the accounting inside ttm, simplifying
driver and avoiding code duplication accross them.
v2 fix accounting of ghost object, one would have thought that i
would have run into the issue since a longtime but it seems
ghost object are rare when you have plenty of vram ;)
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
ttm_backend will only exist with a ttm_tt, and ttm_tt
will only be of interest when bound to a backend. Merge them
to avoid code and data duplication.
V2 Rebase on top of memory accounting overhaul
V3 Rebase on top of more memory accounting changes
V4 Rebase on top of no memory account changes (where/when is my
delorean when i need it ?)
V5 make sure ttm is unbound before destroying, change commit
message on suggestion from Tormod Volden
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
This was never use in none of the driver, properly using userspace
page for bo would need more code (vma interaction mostly). Removing
this dead code in preparation of ttm_tt & backend merge.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
An unlikely race could case a bo to be returned reserved on an error path.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit dfadbbdb57.
Further upstream discussion between Marek and Thomas decided this wasn't
fully baked and needed further work, so revert it before it hits mainline.
Signed-off-by: Dave Airlie <airlied@redhat.com>
There are a number of fixes in mainline required for code in -next,
also there was a few conflicts I'd rather resolve myself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/radeon/evergreen.c
drivers/gpu/drm/radeon/r600.c
drivers/gpu/drm/radeon/radeon_asic.h
Fixes an information leak to userspace, we were handing out un-zeroed pages
for any newly created TTM_PL_TT buffer.
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sometimes we want to know whether a buffer is busy and wait for it (bo_wait).
However, sometimes it would be more useful to be able to query whether
a buffer is busy and being either read or written, and wait until it's stopped
being either read or written. The point of this is to be able to avoid
unnecessary waiting, e.g. if a GPU has written something to a buffer and is now
reading that buffer, and a CPU wants to map that buffer for read, it needs to
only wait for the last write. If there were no write, there wouldn't be any
waiting needed.
This, or course, requires user space drivers to send read/write flags
with each relocation (like we have read/write domains in radeon, so we can
actually use those for something useful now).
Now how this patch works:
The read/write flags should passed to ttm_validate_buffer. TTM maintains
separate sync objects of the last read and write for each buffer, in addition
to the sync object of the last use of a buffer. ttm_bo_wait then operates
with one the sync objects.
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't
the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some
paths as nouveau's move_notify() hook requires that the dma addresses be
valid at this point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
ttm_tt_destroy kfrees passed object, so we need to nullify
a reference to it.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: stable@kernel.org
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nouveau doesn't have enough information at ttm_backend_func.bind() time
to implement things like tiled GART, or to keep a buffer at a constant
address in the GPU virtual address space no matter where in physical
memory it's placed.
To resolve this, nouveau will handle binding of all buffers to the GPU
itself from the move_notify() hook. This commit ensures it's called
for all buffer moves.
Talked to Dave about the impact on radeon, which uses move_notify, it
doesn't look like anything should break there.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thomas@shipmail.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (390 commits)
drm/radeon/kms: disable underscan by default
drm/radeon/kms: only enable hdmi features if the monitor supports audio
drm: Restore the old_fb upon modeset failure
drm/nouveau: fix hwmon device binding
radeon: consolidate asic-specific function decls for pre-r600
vga_switcheroo: comparing too few characters in strncmp()
drm/radeon/kms: add NI pci ids
drm/radeon/kms: don't enable pcie gen2 on NI yet
drm/radeon/kms: add radeon_asic struct for NI asics
drm/radeon/kms/ni: load default sclk/mclk/vddc at pm init
drm/radeon/kms: add ucode loader for NI
drm/radeon/kms: add support for DCE5 display LUTs
drm/radeon/kms: add ni_reg.h
drm/radeon/kms: add bo blit support for NI
drm/radeon/kms: always use writeback/events for fences on NI
drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5
drm/radeon/kms: add backend map workaround for barts
drm/radeon/kms: fill gpu init for NI asics
drm/radeon/kms: add disabled vbios accessor for NI asics
drm/radeon/kms: handle NI thermal controller
...
Make ttm_bo::ttm_bo_device_release call cancel_delayed_work_sync()
instead of calling cancel_delayed_work() followed by
flush_scheduled_work().
This is to prepare for the deprecation and removal of
flush_scheduled_work().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc:: Thomas Hellstrom <thellstrom@vmware.com>
Cc:: Dave Airlie <airlied@redhat.com>
This patch attempts to fix up shortcomings with the current calling
sequences.
1) There's a fastpath where no locking occurs and only io_mem_reserved is
called to obtain needed info for mapping. The fastpath is set per
memory type manager.
2) If the fastpath is disabled, io_mem_reserve and io_mem_free will be exactly
balanced and not called recursively for the same struct ttm_mem_reg.
3) Optionally the driver can choose to enable a per memory type manager LRU
eviction mechanism that, when io_mem_reserve returns -EAGAIN will attempt
to kill user-space mappings of memory in that manager to free up needed
resources
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Rather than having the driver supply the validation sequence, leave that
responsibility to TTM. This saves some confusion and a function argument.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Drastically reduce the number of spin lock / unlock operations by performing
unreserving and fencing under global locks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The bo lock used only to protect the bo sync object members, and since it
is a per bo lock, fencing a buffer list will see a lot of locks and unlocks.
Replace it with a per-device lock that protects the sync object members on
*all* bos. Reading and setting these members will always be very quick, so
the risc of heavy lock contention is microscopic. Note that waiting for
sync objects will always take place outside of this lock.
The bo device fence lock will eventually be replaced with a seqlock /
rcu mechanism so we can determine that a bo is idle under a
rcu / read seqlock.
However this change will allow us to batch fencing and unreserving of
buffers with a minimal amount of locking.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add an aid for the driver to detect deadlocks on multi-bo reservations
Update documentation.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Makes it possible to reserve a list of buffer objects with a single
spin lock / unlock if there is no contention.
Should improve cpu usage on SMP kernels.
v2: Initialize private list members on reserve and don't call
ttm_bo_list_ref_sub() with zero put_count.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A process suspended waiting for a higher sequence or no sequence to unreserve,
a bo may be beaten to the reservation by a process with a lower sequence.
In that case the first process should give up trying to reserve and
return -EAGAIN. In order for that to happen, we must wake waiting processes
when we change sequence, so that they have a chance to detect the new
sequence.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Call destroy() on _all_ ttm_bo_init() failures, and make sure that
behavior is documented in the function description.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This breaks vmwgfx non-root EGL clients and is a remnant from the
TTM user-space interface. This test should be done in the driver.
Replace the remaining placement test with a BUG_ON, since triggering
it is a driver bug.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The sync object may disappear as soon as we release the bo::lock, so
take a reference on it while we use it.
One option would be to call sync_object_flush() before releasing the bo::lock,
but that would put an atomic requirement on that function.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Since we're doing this outside of a spinlock to provide the necessary
barriers, add an explicit barrier.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replace with BUG_ON(). These error messages remained from the time
when TTM was initialized from user-space. Nowadays hitting one of those
is really a kernel bug.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Remove an obsolete comment about mm nodes.
Document the new bo range manager interface.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit replaces the ttm_bo_cleanup_ref function with two new functions.
One for the case where the bo is not yet on the delayed destroy list, and
one for the case where the bo was on the delayed destroy list, at least at
the time of call. This makes it possible to optimize the two cases somewhat.
It also enables the possibility to directly destroy buffers on the
delayed delete list when they are about to be evicted or swapped out.
Currently they were only evicted / swapped and destruction was left for the
delayed buffer destruction thread.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Christian König