Commit Graph

1711 Commits

Author SHA1 Message Date
Masahiro Yamada eeb5687a71 kbuild: add -Werror=strict-prototypes flag unconditionally
-Wstrict-prototypes is added to KBUILD_CFLAGS first, then overridden
by -Werror=strict-prototypes later.

Let's add -Werror=strict-prototypes unconditionally because it is
supported by GCC 4.6, and also by Clang.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-12-17 00:33:45 +09:00
Masahiro Yamada 42a92bccd2 kbuild: add -fno-PIE flag unconditionally
This flag is documented in the GCC 4.6 manual, and recognized by
Clang as well. Let's rip off the cc-option switch.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-12-17 00:33:44 +09:00
Masahiro Yamada 7d0e5c2056 kbuild: refactor Makefile.asm-generic
- Use conventional $(MAKE) $(asm-generic)=<dir> style
   for directory descending

 - Remove unneeded FORCE since "all" is a phony target

 - Remove unneeded "_dummy :=" assignment

 - Skip $(shell mkdir ...) when headers exist in the directory

 - Misc cleanups

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-17 00:33:14 +09:00
Rob Herring 4f0e3a57d6 kbuild: Add support for DT binding schema checks
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.

Check DT binding schema documents:
make dt_binding_check

Build dts files and check using DT binding schema:
make dtbs_check

Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.

Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-13 09:41:32 -06:00
Linus Torvalds 40e020c129 Linux 4.20-rc6 2018-12-09 15:31:00 -08:00
Masahiro Yamada 257edce66d kbuild: exploit parallel building for CONFIG_HEADERS_CHECK
When CONFIG_HEADERS_CHECK is enabled, the headers_check is executed
as a serialized task in the vmlinux recipe.

Make it independent of vmlinux so that parallel building can process
the headers_check and other build targets simultaneously.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-08 10:52:26 +09:00
Linus Torvalds 2595646791 Linux 4.20-rc5 2018-12-02 15:07:55 -08:00
Masahiro Yamada 392885ee82 kbuild: let fixdep directly write to .*.cmd files
Currently, fixdep writes dependencies to .*.tmp, which is renamed to
.*.cmd after everything succeeds. This is a very safe way to avoid
corrupted .*.cmd files. The if_changed_dep has carried this safety
mechanism since it was added in 2002.

If fixdep fails for some reasons or a user terminates the build while
fixdep is running, the incomplete output from the fixdep could be
troublesome.

This is my insight about some bad scenarios:

[1] If the compiler succeeds to generate *.o file, but fixdep fails
    to write necessary dependencies to .*.cmd file, Make will miss
    to rebuild the object when headers or CONFIG options are changed.
    In this case, fixdep should not generate .*.cmd file at all so
    that 'arg-check' will surely trigger the rebuild of the object.

[2] A partially constructed .*.cmd file may not be a syntactically
    correct makefile. The next time Make runs, it would include it,
    then fail to parse it. Once this happens, 'make clean' is be the
    only way to fix it.

In fact, [1] is no longer a problem since commit 9c2af1c737 ("kbuild:
add .DELETE_ON_ERROR special target"). Make deletes a target file on
any failure in its recipe. Because fixdep is a part of the recipe of
*.o target, if it fails, the *.o is deleted anyway. However, I am a
bit worried about the slight possibility of [2].

So, here is a solution. Let fixdep directly write to a .*.cmd file,
but allow makefiles to include it only when its corresponding target
exists.

This effectively reverts commit 2982c95357 ("kbuild: remove redundant
$(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba
("kbuild: remove dead code in cmd_files calculation in top Makefile")
because now we must check the presence of targets.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 23:13:14 +09:00
Masahiro Yamada ce2fd53a10 kbuild: descend into scripts/gcc-plugins/ via scripts/Makefile
Now that 'archprepare' depends on 'scripts', Kbuild can descend into
scripts/gcc-plugins in a more standard way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-12-01 23:09:38 +09:00
Masahiro Yamada 059bc9fc37 kbuild: make 'archprepare' depend on 'scripts'
Before start descending, Kbuild needs to run 'prepare' and 'scripts',
which has been orthogonal to each other.

Going forward, let's consider 'scripts' is a part of the preparation.
This will allow more cleanups.

Move 'scripts' to the prerequisite of 'archprepare', where UML starts
compiling target *.c files.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 23:09:37 +09:00
Masahiro Yamada 60df1aee2a kbuild: move modpost out of 'scripts' target
I am eagar to build under the scripts/ directory only with $(HOSTCC),
but scripts/mod/ highly depends on the $(CC) and target arch headers.
That it why the 'scripts' target must depend on 'asm-generic',
'gcc-plugins', and $(autoksyms_h).

Move it to the 'prepare0' stage. I know this is a cheesy workaround,
but better than the current situation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 23:09:34 +09:00
Masahiro Yamada 65bba0423e kbuild: fix UML build error with CONFIG_GCC_PLUGINS
UML fails to build with CONFIG_GCC_PLUGINS=y.

$ make -s ARCH=um mrproper
$ make -s ARCH=um allmodconfig
$ make ARCH=um
  UPD     include/generated/uapi/linux/version.h
  WRAP    arch/x86/include/generated/uapi/asm/bpf_perf_event.h
  WRAP    arch/x86/include/generated/uapi/asm/poll.h
  WRAP    arch/x86/include/generated/asm/dma-contiguous.h
  WRAP    arch/x86/include/generated/asm/early_ioremap.h
  WRAP    arch/x86/include/generated/asm/export.h
  WRAP    arch/x86/include/generated/asm/mcs_spinlock.h
  WRAP    arch/x86/include/generated/asm/mm-arch-hooks.h
  SYSTBL  arch/x86/include/generated/asm/syscalls_32.h
  SYSHDR  arch/x86/include/generated/asm/unistd_32_ia32.h
  SYSHDR  arch/x86/include/generated/asm/unistd_64_x32.h
  SYSTBL  arch/x86/include/generated/asm/syscalls_64.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_32.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_64.h
  SYSHDR  arch/x86/include/generated/uapi/asm/unistd_x32.h
  HOSTCC  scripts/unifdef
  CC      arch/x86/um/user-offsets.s
cc1: error: cannot load plugin ./scripts/gcc-plugins/cyc_complexity_plugin.so
./scripts/gcc-plugins/cyc_complexity_plugin.so: cannot open shared object file: No such file or directory
cc1: error: cannot load plugin ./scripts/gcc-plugins/structleak_plugin.so
./scripts/gcc-plugins/structleak_plugin.so: cannot open shared object file: No such file or directory
cc1: error: cannot load plugin ./scripts/gcc-plugins/latent_entropy_plugin.so
./scripts/gcc-plugins/latent_entropy_plugin.so: cannot open shared object file: No such file or directory
cc1: error: cannot load plugin ./scripts/gcc-plugins/randomize_layout_plugin.so
./scripts/gcc-plugins/randomize_layout_plugin.so: cannot open shared object file: No such file or directory
make[1]: *** [scripts/Makefile.build;119: arch/x86/um/user-offsets.s] Error 1
make: *** [arch/um/Makefile;152: arch/x86/um/user-offsets.s] Error 2

Reorder the preparation stage (with cleanups) to make sure gcc-plugins
is built before descending to arch/x86/um/.

Fixes: 6b90bd4ba4 ("GCC plugin infrastructure")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 22:21:59 +09:00
Masahiro Yamada e07db28eea kbuild: fix single target build for external module
Building a single target in an external module fails due to missing
.tmp_versions directory.

For example,

  $ make -C /lib/modules/$(uname -r)/build M=$PWD foo.o

will fail in the following way:

  CC [M]  /home/masahiro/foo/foo.o
/bin/sh: 1: cannot create /home/masahiro/foo/.tmp_versions/foo.mod: Directory nonexistent

This is because $(cmd_crmodverdir) is executed only before building
/, %/, %.ko single targets of external modules. Create .tmp_versions
in the 'prepare' target.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-01 22:21:57 +09:00
Masahiro Yamada 0126be38d9 kbuild: announce removal of SUBDIRS if used
SUBDIRS has been kept as a backward compatibility since
commit ("[PATCH] kbuild: external module support") in 2002.

We do not need multiple ways to do the same thing, so I will remove
SUBDIRS after the Linux 5.3 release. I cleaned up in-tree code, and
updated the document so that nobody would try to use it.

Meanwhile, display the following warning if SUBDIRS is used.

Makefile:189: ================= WARNING ================
Makefile:190: 'SUBDIRS' will be removed after Linux 5.3
Makefile:191: Please use 'M=' or 'KBUILD_EXTMOD' instead
Makefile:192: ==========================================

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> # for scx200_docflash.c
Acked-by: Guenter Roeck <linux@roeck-us.net> # for scx200_wdt.c
2018-12-01 22:21:56 +09:00
Linus Torvalds 2e6e902d18 Linux 4.20-rc4 2018-11-25 14:19:31 -08:00
Linus Torvalds 9ff01193a2 Linux 4.20-rc3 2018-11-18 13:33:44 -08:00
Joel Stanley 3bd9805090 Makefile: Export clang toolchain variables
The powerpc makefile will use these in it's boot wrapper.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-14 08:21:22 +09:00
Masahiro Yamada 238bcbc4e0 kbuild: consolidate Clang compiler flags
Collect basic Clang options such as --target, --prefix, --gcc-toolchain,
-no-integrated-as into a single variable CLANG_FLAGS so that it can be
easily reused in other parts of Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
2018-11-14 08:21:22 +09:00
Masahiro Yamada dbe27a002e kbuild: add -no-integrated-as Clang option unconditionally
We are still a way off the Clang's integrated assembler support for
the kernel. Hence, -no-integrated-as is mandatory to build the kernel
with Clang. If you had an ancient version of Clang that does not
recognize this option, you would not be able to compile the kernel
anyway.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-11-14 08:21:21 +09:00
Linus Torvalds ccda4af0f4 Linux 4.20-rc2 2018-11-11 17:12:31 -06:00
Linus Torvalds 651022382c Linux 4.20-rc1 2018-11-04 15:37:52 -08:00
Masahiro Yamada 9951674207 kbuild: remove cc-name variable
There is one more user of $(cc-name) in the top Makefile. It is supposed
to detect Clang before invoking Kconfig, so it should still be there
in the $(shell ...) form. All the other users of $(cc-name) have been
replaced with $(CONFIG_CC_IS_CLANG). Hence, scripts/Kbuild.include does
not need to define cc-name any more.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-02 22:49:01 +09:00
Masahiro Yamada 076f421da5 kbuild: replace cc-name test with CONFIG_CC_IS_CLANG
Evaluating cc-name invokes the compiler every time even when you are
not compiling anything, like 'make help'. This is not efficient.

The compiler type has been already detected in the Kconfig stage.
Use CONFIG_CC_IS_CLANG, instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Paul Burton <paul.burton@mips.com> (MIPS)
Acked-by: Joel Stanley <joel@jms.id.au>
2018-11-02 22:49:00 +09:00
Linus Torvalds 746bb4ed6d Globally warn on VLA use
- Remove unused fallback for BUILD_BUG_ON (which technically contains a VLA)
 - Lift -Wvla to the top-level Makefile
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAlvV7jMWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkUwD/46aPTmVXQqzVr1QxRC087Aou5H
 hCMaUSG0mSuinhIpB398xh58imTqz48n44gf8yrBgittecV+g8cQ3TJZBp8fSbj4
 zyuSy0xlghxqNYhsirMPdN61A8qOS/F7i60XFBXSKpdzKorUUsqlP6paDg1CWslB
 KWIOr2aHxvQk93pHFsWjOeM7CGqQIq1brKKDPAL+R4zj8EzXfi0s1sOR4tHCXRZP
 sTsuHysAjsBlaw54tvbCA5SIyABzZK5xsQoeChSKMoCDQb8TOQK4j8f78470/nmk
 lFWZWGKFr2sPUPcuf1casL5Cp57ycjwi4qTzKX2Qa1hhEhrYTIvcOwzOWdc0AY+6
 Fttbopla1QmrGndLtm8FOJRGWiCAzhiSpV9vk1VDaP2jeCc6MEvTC0shsAgxSfsr
 JRIHqq37w3TBr78qeNuxOaSEkoqtjTVYug2aq7kefG66DGGChzCTVNQrLVNei3Qg
 ZdamzUZz7FVV6WmXlWsBfbm14sIRd02r7XORm0cJdIVvIwqJ9QIGJigR/Sfc4Qdi
 pXuuE3TNSfArACXlCkaBfqMYAhWO35qy41TerRlRDkri89DNHPY8RAVV0GpNSp7q
 kPaPBHZRKXAjHPnnypXz3A/zQoqJ7uWRG5msethAWtEXJBQ4qQWVhjTNmV7tkOkr
 HIaJFTb03LLIcuv23Q==
 =Vnw8
 -----END PGP SIGNATURE-----

Merge tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull VLA removal from Kees Cook:
 "Globally warn on VLA use.

  This turns on "-Wvla" globally now that the last few trees with their
  VLA removals have landed (crypto, block, net, and powerpc).

  Arnd mentioned that there may be a couple more VLAs hiding in
  hard-to-find randconfigs, but nothing big has shaken out in the last
  month or so in linux-next.

  We should be basically VLA-free now! Wheee. :)

  Summary:

   - Remove unused fallback for BUILD_BUG_ON (which technically contains
     a VLA)

   - Lift -Wvla to the top-level Makefile"

* tag 'vla-v4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  Makefile: Globally enable VLA warning
  compiler.h: give up __compiletime_assert_fallback()
2018-10-28 13:26:45 -07:00
Linus Torvalds ac747c0715 Kbuild updates for v4.20
- optimize kallsyms slightly
 
 - remove check for old CFLAGS usage
 
 - add some compiler flags unconditionally instead of evaluating
   $(call cc-option,...)
 
 - fix variable shadowing in host tools
 
 - refactor scripts/mkmakefile
 
 - refactor various makefiles
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb1eyEAAoJED2LAQed4NsGUjwP/0/W0nLP+nKCJ0NpsSD151Ea
 Vrbm+RMxl8uPuQ0+Bh59rdO2yWR8v7jOX8CPbX1DqW0XwW4vTNRZm9j6A83rJzHv
 dPpinUObq6vXGJCYvMLoumhOkM1lRZie1AeBeLgKF0G0jprxUspGvakSyM/5SOo6
 3gIhpPcczijC980KHIJbmwiGqRFVs3/zwqcKjQaRD3C6f4HdJL3i9Zr7kuZF0g1x
 dxCdN4Shv5x0igggp58z8646bbKlN7hItYaPq2csDop55/jWKzUkBkFkeaDjiUdB
 B6ysQfwkuTb6sbKXE6euYLUTyc6epx9v9pey0FpOx5tjXT+QmgK1ddLQEwdFH2+/
 Fd5VR70h8uKTNvmqFJ+iebpR/aC71sUqYAzsoiTVZibR/F6+QAuhHJPZJDlSSwLC
 QH7j0fwJ3X5p9PYe3JBWyWzOd9BDvtV+HGE67Kx17iRNW0FDyKSvn7tezRVtqvHr
 KENrMT4n+lNQzB+c4lfjOE9ANpOf+PP4+ODhbrtvKItyb5QfF4F+5CDVif3wv3Kt
 6dvh13hvR06gQCpbuxcFgD17mT1T/lVieuzOnWjtEh4HiMI1H0abYfkRWbQshrti
 u7TfYxwAyWKtisiPiT/1THYsW3ux7QmTSIo2iOznQxDlbmzENpQx+f22HsLaC0XU
 AUgvKGBaN0WOar2f2gyq
 =jM4E
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - optimize kallsyms slightly

 - remove check for old CFLAGS usage

 - add some compiler flags unconditionally instead of evaluating
   $(call cc-option,...)

 - fix variable shadowing in host tools

 - refactor scripts/mkmakefile

 - refactor various makefiles

* tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: Create macro to avoid variable shadowing
  ASN.1: Remove unnecessary shadowed local variable
  kbuild: use 'else ifeq' for checksrc to improve readability
  kbuild: remove unneeded link_multi_deps
  kbuild: add -Wno-unused-but-set-variable flag unconditionally
  kbuild: add -Wdeclaration-after-statement flag unconditionally
  kbuild: add -Wno-pointer-sign flag unconditionally
  modpost: remove leftover symbol prefix handling for module device table
  kbuild: simplify command line creation in scripts/mkmakefile
  kbuild: do not pass $(objtree) to scripts/mkmakefile
  kbuild: remove user ID check in scripts/mkmakefile
  kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile
  kbuild: add --include-dir flag only for out-of-tree build
  kbuild: remove dead code in cmd_files calculation in top Makefile
  kbuild: hide most of targets when running config or mixed targets
  kbuild: remove old check for CFLAGS use
  kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally
  kallsyms: remove left-over Blackfin code
  kallsyms: reduce size a little on 64-bit
2018-10-28 13:22:35 -07:00
Linus Torvalds b27186abb3 Devicetree updates for 4.20:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
 
 - Work to get rid of direct accesses to struct device_node name and
   type pointers in preparation for removing them. New helpers for
   parsing DT cpu nodes and conversions to use the helpers. printk
   conversions to %pOFn for printing DT node names. Most went thru
   subystem trees, so this is the remainder.
 
 - Fixes to DT child node lookups to actually be restricted to child
   nodes instead of treewide.
 
 - Refactoring of dtb targets out of arch code. This makes the support
   more uniform and enables building all dtbs on c6x, microblaze, and
   powerpc.
 
 - Various DT binding updates for Renesas r8a7744 SoC
 
 - Vendor prefixes for Facebook, OLPC
 
 - Restructuring of some ARM binding docs moving some peripheral bindings
   out of board/SoC binding files
 
 - New "secure-chosen" binding for secure world settings on ARM
 
 - Dual licensing of 2 DT IRQ binding headers
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAlvTKWYQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw8J5EACMAnrTxWQmXfQXOZEVxztcFavH6LP8mh2e
 7FZIZ38jzHXXvl81tAg1nBhzFUU/qtvqW8NDCZ9OBxKvp6PFDNhWu241ZodSB1Kw
 MZWy2A9QC+qbHYCC+SB5gOT0+Py3v7LNCBa5/TxhbFd35THJM8X0FP7gmcCGX593
 9Ml1rqawT4mK5XmCpczT0cXxyC4TgVtpfDWZH2KgJTR/kwXVQlOQOGZ8a1y/wrt7
 8TLIe7Qy4SFRzjhwbSta1PUehyYfe4uTSsXIJ84kMvNMxinLXQtvd7t9TfsK8p/R
 WjYUneJskVjtxVrMQfdV4MxyFL1YEt2mYcr0PMKIWxMCgGDAZsHPoUZmjyh/PrCI
 uiZtEHn3fXpUZAV/xEHHNirJxYyQfHGiksAT+lPrUXYYLCcZ3ZmqiTEYhGoQAfH5
 CQPMuxA6yXxp6bov6zJwZSTZtkXciju8aQRhUhlxIfHTqezmGYeql/bnWd+InNuR
 upANLZBh6D2jTWzDyobconkCCLlVkSqDoqOx725mMl6hIcdH9d2jVX7hwRf077VI
 5i3CyPSJOkSOLSdB8bAPYfBoaDtH2bthxieUrkkSbIjbwHO1H6a2lxPeG/zah0a3
 ePMGhi7J84UM4VpJEi000cP+bhPumJtJrG7zxP7ldXdfAF436sQ6KRptlcpLpj5i
 IwMhUQNH+g==
 =335v
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:
 "A bit bigger than normal as I've been busy this cycle.

  There's a few things with dependencies and a few things subsystem
  maintainers didn't pick up, so I'm taking them thru my tree.

  The fixes from Johan didn't get into linux-next, but they've been
  waiting for some time now and they are what's left of what subsystem
  maintainers didn't pick up.

  Summary:

   - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4

   - Work to get rid of direct accesses to struct device_node name and
     type pointers in preparation for removing them. New helpers for
     parsing DT cpu nodes and conversions to use the helpers. printk
     conversions to %pOFn for printing DT node names. Most went thru
     subystem trees, so this is the remainder.

   - Fixes to DT child node lookups to actually be restricted to child
     nodes instead of treewide.

   - Refactoring of dtb targets out of arch code. This makes the support
     more uniform and enables building all dtbs on c6x, microblaze, and
     powerpc.

   - Various DT binding updates for Renesas r8a7744 SoC

   - Vendor prefixes for Facebook, OLPC

   - Restructuring of some ARM binding docs moving some peripheral
     bindings out of board/SoC binding files

   - New "secure-chosen" binding for secure world settings on ARM

   - Dual licensing of 2 DT IRQ binding headers"

* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
  ARM: dt: relicense two DT binding IRQ headers
  power: supply: twl4030-charger: fix OF sibling-node lookup
  NFC: nfcmrvl_uart: fix OF child-node lookup
  net: stmmac: dwmac-sun8i: fix OF child-node lookup
  net: bcmgenet: fix OF child-node lookup
  drm/msm: fix OF child-node lookup
  drm/mediatek: fix OF sibling-node lookup
  of: Add missing exports of node name compare functions
  dt-bindings: Add OLPC vendor prefix
  dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
  dt-bindings: thermal: samsung: Add SPDX license identifier
  dt-bindings: clock: samsung: Add SPDX license identifiers
  dt-bindings: timer: ostm: Add R7S9210 support
  dt-bindings: phy: rcar-gen2: Add r8a7744 support
  dt-bindings: can: rcar_can: Add r8a7744 support
  dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
  dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
  dt-bindings: thermal: rcar: Add device tree support for r8a7744
  Documentation: dt: Add binding for /secure-chosen/stdout-path
  dt-bindings: arm: zte: Move sysctrl bindings to their own doc
  ...
2018-10-26 12:09:58 -07:00
Linus Torvalds 0200fbdd43 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and misc x86 updates from Ingo Molnar:
 "Lots of changes in this cycle - in part because locking/core attracted
  a number of related x86 low level work which was easier to handle in a
  single tree:

   - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
     McKenney, Andrea Parri)

   - lockdep scalability improvements and micro-optimizations (Waiman
     Long)

   - rwsem improvements (Waiman Long)

   - spinlock micro-optimization (Matthew Wilcox)

   - qspinlocks: Provide a liveness guarantee (more fairness) on x86.
     (Peter Zijlstra)

   - Add support for relative references in jump tables on arm64, x86
     and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)

   - Be a lot less permissive on weird (kernel address) uaccess faults
     on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
     Horn)

   - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
     Amit)

   - ... and a handful of other smaller changes as well"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
  locking/lockdep: Make global debug_locks* variables read-mostly
  locking/lockdep: Fix debug_locks off performance problem
  locking/pvqspinlock: Extend node size when pvqspinlock is configured
  locking/qspinlock_stat: Count instances of nested lock slowpaths
  locking/qspinlock, x86: Provide liveness guarantee
  x86/asm: 'Simplify' GEN_*_RMWcc() macros
  locking/qspinlock: Rework some comments
  locking/qspinlock: Re-order code
  locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
  x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
  futex: Replace spin_is_locked() with lockdep
  locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
  x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
  x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
  x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
  x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
  x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
  x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
  x86/refcount: Work around GCC inlining bug
  x86/objtool: Use asm macros to work around GCC inlining bugs
  ...
2018-10-23 13:08:53 +01:00
Greg Kroah-Hartman 84df9525b0 Linux 4.19 2018-10-22 07:37:37 +01:00
Masahiro Yamada 9df3e7a7d7 kbuild: add -Wno-unused-but-set-variable flag unconditionally
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.

This flag was added by GCC 4.6, and it is recognized by ICC as well.

It is true that Clang does not support this flag but this commit is
just touching the else part of the "ifeq ($(cc-name),clang)" check.
Hence, Clang build is not affected.

Let's rip off the cc-disable-warning switch, and see if somebody
complains about it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-19 09:47:45 +09:00
Masahiro Yamada a33e7ae295 kbuild: add -Wdeclaration-after-statement flag unconditionally
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.

This flag has been here since the pre-git era. It is documented in
the GCC 4.6 manual, and it is recognized by Clang and ICC as well.

Let's rip off the cc-option switch, and see if somebody complains
about it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-19 09:47:45 +09:00
Masahiro Yamada fb073a4b47 kbuild: add -Wno-pointer-sign flag unconditionally
We have raised the compiler requirement from time to time.
With commit cafa0010cd ("Raise the minimum required gcc version
to 4.6"), the minimum for GCC is 4.6 now.

The -Wno-pointer-sign has been here since the pre-git era. It is
documented in the GCC 4.6 manual, and it is recognized by Clang
and ICC as well.

Let's rip off the cc-disable-warning switch, and see if somebody
complains about it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
2018-10-19 09:47:44 +09:00
Greg Kroah-Hartman 35a7f35ad1 Linux 4.19-rc8 2018-10-15 07:20:24 +02:00
Greg Kroah-Hartman e5337178f7 Kbuild fixes for v4.19 (2nd)
- Fix warnings from recordmcount.pl when building with Clang
 
  - Allow Clang to use GNU toolchains correctly
 
  - Disable CONFIG_SAMPLES for UML to avoid build error
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbv2u8AAoJED2LAQed4NsGXUQQAIAZZ5KVqOuqsKcJvUbWEDAa
 SnjBzcuRf6csyu1IgQ94BNRVX7BG5n2K55c6WRCDkP8kbUSKM7xODM0tv3imv9pF
 3RBb3X9xnI+KdtxqRgrZdtZ1gFPgVJ2YGzHbKYMbjaLcO3sHLo1G2OLmi2ZEiG9d
 ZFx7QSy/iKVDPXnfZoKEBasr1J8NzzYDEJKgYxuyEwNdEI3e8ZxicjERJMUoJvVG
 J8YH+3xl1DMAZ33SGSIHcl6QPJWVCRpp3FblsnVbGYmROEqnf7jk8ThVHhffcYr7
 AGCOV1q79pFsC80oo9AGrDQeNLfCM/LoXqPyvAxilCnxvN7A3lSEFKj8XGo2shC0
 PCvM3DcISmbP6TLpJp/7VQ2MDxAPoA72LEvUa5F70BSrfAIjAje4Z0LuUfMrpWe0
 0guY9pOvdpq1H0YKCLwf44n0CnlTT4t3S+lGRcO1dZyqPH6acAnt+V2BHgtMC084
 SJvZiFJ1+cSyIzI7orB5yyVvSVj2vEM5Iyhwr6rSLQdQ9pYVn7+oWpA9rvR7CENJ
 rFRt1+cs4q/aNDma67e/oSyZKYXYz+Fzq2f5OleDiCV4xAKLnH0tFg5hHIEFr7Cs
 SC6rt6W6duutHrrqhB9kT0O5r/HCsV9MF875cQev1jQbxgC3VBdAi8UhL2T6BKfW
 2PKwVF7ZyvVQ3nBPTIbT
 =bOon
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Masahiro writes:
  "Kbuild fixes for v4.19 (2nd)
   - Fix warnings from recordmcount.pl when building with Clang
   - Allow Clang to use GNU toolchains correctly
   - Disable CONFIG_SAMPLES for UML to avoid build error"

* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  samples: disable CONFIG_SAMPLES for UML
  kbuild: allow to use GCC toolchain not in Clang search path
  ftrace: Build with CPPFLAGS to get -Qunused-arguments
2018-10-11 19:23:07 +02:00
Kees Cook 0bb95f80a3 Makefile: Globally enable VLA warning
Now that Variable Length Arrays (VLAs) have been entirely removed[1]
from the kernel, enable the VLA warning globally. The only exceptions
to this are the KASan an UBSan tests which are explicitly checking that
VLAs trigger their respective tests.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Airlie <airlied@linux.ie>
Cc: linux-kbuild@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-10-11 08:17:50 -07:00
Greg Kroah-Hartman 0238df646e Linux 4.19-rc7 2018-10-07 17:26:02 +02:00
Masahiro Yamada 4fd61277f6 kbuild: do not pass $(objtree) to scripts/mkmakefile
Since $(objtree) is always '.', it is not useful to pass it to
scripts/mkmakefile.  I assume nobody wants to run this script directly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04 22:56:02 +09:00
Masahiro Yamada 77ec0c20c7 kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile
Neither VERSION nor PATCHLEVEL is used in any useful way.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04 22:56:01 +09:00
Masahiro Yamada 80463f1b7b kbuild: add --include-dir flag only for out-of-tree build
The --include-dir flag is used to include check-in Makefiles from
$(objtree) without $(srctree)/ prefix.  Obviously, this is unneeded
for in-tree build.  Add the flag just before changing the working
directory.

This becomes effective after invoking sub-make.  Add a little bit
comments about it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-04 22:56:01 +09:00
Nadav Amit 77b0bf55bc kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs
Using macros in inline assembly allows us to work around bugs
in GCC's inlining decisions.

Compile macros.S and use it to assemble all C files.
Currently only x86 will use it.

Background:

The inlining pass of GCC doesn't include an assembler, so it's not aware
of basic properties of the generated code, such as its size in bytes,
or that there are such things as discontiuous blocks of code and data
due to the newfangled linker feature called 'sections' ...

Instead GCC uses a lazy and fragile heuristic: it does a linear count of
certain syntactic and whitespace elements in inlined assembly block source
code, such as a count of new-lines and semicolons (!), as a poor substitute
for "code size and complexity".

Unsurprisingly this heuristic falls over and breaks its neck whith certain
common types of kernel code that use inline assembly, such as the frequent
practice of putting useful information into alternative sections.

As a result of this fresh, 20+ years old GCC bug, GCC's inlining decisions
are effectively disabled for inlined functions that make use of such asm()
blocks, because GCC thinks those sections of code are "large" - when in
reality they are often result in just a very low number of machine
instructions.

This absolute lack of inlining provess when GCC comes across such asm()
blocks both increases generated kernel code size and causes performance
overhead, which is particularly noticeable on paravirt kernels, which make
frequent use of these inlining facilities in attempt to stay out of the
way when running on baremetal hardware.

Instead of fixing the compiler we use a workaround: we set an assembly macro
and call it from the inlined assembly block. As a result GCC considers the
inline assembly block as a single instruction. (Which it often isn't but I digress.)

This uglifies and bloats the source code - for example just the refcount
related changes have this impact:

 Makefile                 |    9 +++++++--
 arch/x86/Makefile        |    7 +++++++
 arch/x86/kernel/macros.S |    7 +++++++
 scripts/Kbuild.include   |    4 +++-
 scripts/mod/Makefile     |    2 ++
 5 files changed, 26 insertions(+), 3 deletions(-)

Yay readability and maintainability, it's not like assembly code is hard to read
and maintain ...

We also hope that GCC will eventually get fixed, but we are not holding
our breath for that. Yet we are optimistic, it might still happen, any decade now.

[ mingo: Wrote new changelog describing the background. ]

Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20181003213100.189959-3-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-04 10:57:09 +02:00
Rob Herring 37c8a5fafa kbuild: consolidate Devicetree dtb build rules
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.

The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.

This change enables support 'dtbs_install' on some arches which were
missing the target.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-02 09:23:21 -05:00
Greg Kroah-Hartman 17b57b1883 Linux 4.19-rc6 2018-09-30 07:15:35 -07:00
Greg Kroah-Hartman 6bf4ca7fbc Linux 4.19-rc5 2018-09-23 19:15:18 +02:00
Stefan Agner ef8c4ed9db kbuild: allow to use GCC toolchain not in Clang search path
When using a GCC cross toolchain which is not in a compiled in
Clang search path, Clang reverts to the system assembler and
linker. This leads to assembler or linker errors, depending on
which tool is first used for a given architecture.

It seems that Clang is not searching $PATH for a matching
assembler or linker.

Make sure that Clang picks up the correct assembler or linker by
passing the cross compilers bin directory as search path.

This allows to use Clang provided by distributions with GCC
toolchains not in /usr/bin.

Link: https://github.com/ClangBuiltLinux/linux/issues/78
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-and-tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-19 23:55:45 +09:00
Greg Kroah-Hartman c0747ad363 linux-kselftest-4.19-rc5
This Kselftest fixes update for 4.9-rc5 consists of:
 
 -- fixes to build failures
 -- fixes to add missing config files to increase test coverage
 -- fixes to cgroup test and a new cgroup test for memory.oom.group
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAluerlwACgkQCwJExA0N
 QxzFbA//Xk32yqgo16SNN8uovPJo+Oi5TICblNZTI5d2LlmI/H6+773EALa+m0zC
 2tMvZ1A/SSWymsGTyEAFEuzhwnYqcLZc9InoK8W+hZjKd3XqyjvTp1ZGnA2iJb89
 3wP0VgbEuqhtnyhIAAp6dQuaVBK3kJEmC47IPy1qziVwupotN8xJuj/1/9WiWn5X
 MqIEfmBo4Bi0Ugn8xpOEIBU9bEi3ZNO2iA/3V5j//jzKZzOvbkLSexIQdtcay4Rj
 eLY03Sw5VEKNN5btpf5dpOojmAb2ipOUfQh3RKGpZMmqMqcHm71+GxXxQyjOAZrc
 kFsUjLvKoyEUuVKC84jAhuim8aZIbNxxiKFGBlZFFIcrF/yJt8PX4zo1mpWrlpa/
 Yh5gP+xMMq7p0CaTVTksnqy051bfjCVKyTqwSTTFo5pimCA7JHxAsFvRtSrxgXHf
 DFWXF2n4Jxonn+urc9sdhggdocUTHoqO3c0ImbO897CaDYiOGrmhBuxeaZi6y/0I
 Y9PUAt17IGsB8sp/1C+LMBKkIjxYCBuX53LK/QIvLDNMUcWI6laAYx0etyH0xVPe
 /HMhsDnpyQc0khhDB3XZ5HC3EB3g2S1t2wOl9VRPN3MqJvVlffNHb7psXxG2k99J
 Z/dIaYVuksP6JGM3I/Y30BGpwhdQ/hyzxRpiX065XpDPttUO1XY=
 =79Fh
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pulled kselftest fixes from Shuah:
 "This Kselftest fixes update for 4.9-rc5 consists of:

  -- fixes to build failures
  -- fixes to add missing config files to increase test coverage
  -- fixes to cgroup test and a new cgroup test for memory.oom.group"
2018-09-17 07:24:28 +02:00
Linus Torvalds 7876320f88 Linux 4.19-rc4 2018-09-16 11:52:37 -07:00
Masahiro Yamada 00d78ab2ba kbuild: remove dead code in cmd_files calculation in top Makefile
Nobody sets 'targets' in the top-level Makefile or arch/*/Makefile,
hence $(targets) is empty.

$(wildcard .*.cmd) will do for including the .vmlinux.cmd file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-14 21:47:04 +09:00
Masahiro Yamada 25815cf5ff kbuild: hide most of targets when running config or mixed targets
When mixed/config targets are being processed, the top Makefile
does not need to parse the rest of targets.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-09-14 21:47:04 +09:00
Paulo Zanoni b1f4ff74fc tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE
As a Kernel developer, I make heavy use of "make targz-pkg" in order
to locally compile and remotely install my development Kernels. The
nice feature I rely on is that after a normal "make", "make targz-pkg"
only generates the tarball without having to recompile everything.

That was true until commit f28bc3c32c ("tracing: Handle
CC_FLAGS_FTRACE more accurately"). After it, running "make targz-pkg"
after "make" will recompile the whole Kernel tree, making my
development workflow much slower.

The Kernel is choosing to recompile everything because it claims the
command line has changed. A diff of the .cmd files show a repeated
-mfentry in one of the files. That is because "make targz-pkg" calls
"make modules_install" and the environment is already populated with
the exported variables, CC_FLAGS_FTRACE being one of them. Then,
-mfentry gets duplicated because it is not protected behind an ifndef
block, like -pg.

To complicate the problem a little bit more, architectures can define
their own version CC_FLAGS_FTRACE, so our code not only has to
consider recursive Makefiles, but also architecture overrides.

So in this patch we move CC_FLAGS_FTRACE up and unconditionally
define it to -pg. Then we let the architecture Makefiles possibly
override it, and finally append the extra options later. This ensures
the variable is always fully redefined at each invocation so recursive
Makefiles don't keep appending, and hopefully it maintains the
intended behavior on how architectures can override the defaults..

Thanks Steven Rostedt and Vasily Gorbik for the help on this
regression.

Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: linux-kbuild@vger.kernel.org
Fixes: commit f28bc3c32c ("tracing: Handle CC_FLAGS_FTRACE more accurately")
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-09-12 14:32:18 -04:00
Linus Torvalds 11da3a7f84 Linux 4.19-rc3 2018-09-09 17:26:43 -07:00
Anders Roxell b2d35fa5fc selftests: add headers_install to lib.mk
If the kernel headers aren't installed we can't build all the tests.
Add a new make target rule 'khdr' in the file lib.mk to generate the
kernel headers and that gets include for every test-dir Makefile that
includes lib.mk If the testdir in turn have its own sub-dirs the
top_srcdir needs to be set to the linux-rootdir to be able to generate
the kernel headers.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-09-05 08:12:09 -06:00
Linus Torvalds 57361846b5 Linux 4.19-rc2 2018-09-02 14:37:30 -07:00
Stephen Rothwell 217c3e0196 disable stringop truncation warnings for now
They are too noisy

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-30 18:15:34 -07:00
Linus Torvalds 5b394b2ddf Linux 4.19-rc1 2018-08-26 14:11:59 -07:00
Linus Torvalds 2a8a2b7c49 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:

 - Correct the L1TF fallout on 32bit and the off by one in the 'too much
   RAM for protection' calculation.

 - Add a helpful kernel message for the 'too much RAM' case

 - Unbreak the VDSO in case that the compiler desides to use indirect
   jumps/calls and emits retpolines which cannot be resolved because the
   kernel uses its own thunks, which does not work for the VDSO. Make it
   use the builtin thunks.

 - Re-export start_thread() which was unexported when the 32/64bit
   implementation was unified. start_thread() is required by modular
   binfmt handlers.

 - Trivial cleanups

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/l1tf: Suggest what to do on systems with too much RAM
  x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM
  x86/kvm/vmx: Remove duplicate l1d flush definitions
  x86/speculation/l1tf: Fix overflow in l1tf_pfn_limit() on 32bit
  x86/process: Re-export start_thread()
  x86/mce: Add notifier_block forward declaration
  x86/vdso: Fix vDSO build if a retpoline is emitted
2018-08-26 10:13:21 -07:00
Masahiro Yamada d503ac531a kbuild: rename LDFLAGS to KBUILD_LDFLAGS
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.

Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.

Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.

For some reason, LDFLAGS was not renamed.

Using a well-known variable like LDFLAGS may result in accidental
override of the variable.

Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.

I did not touch Makefiles under tools/ since the tools build system
is a different world.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-24 08:22:08 +09:00
Masahiro Yamada e85d1d65cd kbuild: test dead code/data elimination support in Kconfig
This config option should be enabled only when both the compiler and
the linker support necessary flags.  Add proper dependencies to Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-24 08:10:00 +09:00
Masahiro Yamada dd5806ede3 kbuild: remove "rpm" target, which is alias of "rpm-pkg"
As commit ebaad7d364 ("kbuild: rpm: prompt to use "rpm-pkg" if "rpm"
target is used") noticed, the "rpm" target is now removed.
I assume people have already migrated to "rpm-pkg".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-08-22 23:21:42 +09:00
Linus Torvalds 7140ad3898 Updates for v4.19:
- Restructure of lockdep and latency tracers
 
    This is the biggest change. Joel Fernandes restructured the hooks
    from irqs and preemption disabling and enabling. He got rid of
    a lot of the preprocessor #ifdef mess that they caused.
 
    He turned both lockdep and the latency tracers to use trace events
    inserted in the preempt/irqs disabling paths. But unfortunately,
    these started to cause issues in corner cases. Thus, parts of the
    code was reverted back to where lockde and the latency tracers
    just get called directly (without using the trace events).
    But because the original change cleaned up the code very nicely
    we kept that, as well as the trace events for preempt and irqs
    disabling, but they are limited to not being called in NMIs.
 
  - Have trace events use SRCU for "rcu idle" calls. This was required
    for the preempt/irqs off trace events. But it also had to not
    allow them to be called in NMI context. Waiting till Paul makes
    an NMI safe SRCU API.
 
  - New notrace SRCU API to allow trace events to use SRCU.
 
  - Addition of mcount-nop option support
 
  - SPDX headers replacing GPL templates.
 
  - Various other fixes and clean ups.
 
  - Some fixes are marked for stable, but were not fully tested
    before the merge window opened.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
 c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
 =vgEr
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Restructure of lockdep and latency tracers

   This is the biggest change. Joel Fernandes restructured the hooks
   from irqs and preemption disabling and enabling. He got rid of a lot
   of the preprocessor #ifdef mess that they caused.

   He turned both lockdep and the latency tracers to use trace events
   inserted in the preempt/irqs disabling paths. But unfortunately,
   these started to cause issues in corner cases. Thus, parts of the
   code was reverted back to where lockdep and the latency tracers just
   get called directly (without using the trace events). But because the
   original change cleaned up the code very nicely we kept that, as well
   as the trace events for preempt and irqs disabling, but they are
   limited to not being called in NMIs.

 - Have trace events use SRCU for "rcu idle" calls. This was required
   for the preempt/irqs off trace events. But it also had to not allow
   them to be called in NMI context. Waiting till Paul makes an NMI safe
   SRCU API.

 - New notrace SRCU API to allow trace events to use SRCU.

 - Addition of mcount-nop option support

 - SPDX headers replacing GPL templates.

 - Various other fixes and clean ups.

 - Some fixes are marked for stable, but were not fully tested before
   the merge window opened.

* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix SPDX format headers to use C++ style comments
  tracing: Add SPDX License format tags to tracing files
  tracing: Add SPDX License format to bpf_trace.c
  blktrace: Add SPDX License format header
  s390/ftrace: Add -mfentry and -mnop-mcount support
  tracing: Add -mcount-nop option support
  tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
  tracing: Handle CC_FLAGS_FTRACE more accurately
  Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
  Uprobes: Simplify uprobe_register() body
  tracepoints: Free early tracepoints after RCU is initialized
  uprobes: Use synchronize_rcu() not synchronize_sched()
  tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
  ftrace: Remove unused pointer ftrace_swapper_pid
  tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing/irqsoff: Handle preempt_count for different configs
  tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
  tracing: irqsoff: Account for additional preempt_disable
  trace: Use rcu_dereference_raw for hooks from trace-event subsystem
  tracing/kprobes: Fix within_notrace_func() to check only notrace functions
  ...
2018-08-20 18:32:00 -07:00
Andy Lutomirski 2e549b2ee0 x86/vdso: Fix vDSO build if a retpoline is emitted
Currently, if the vDSO ends up containing an indirect branch or
call, GCC will emit the "external thunk" style of retpoline, and it
will fail to link.

Fix it by building the vDSO with inline retpoline thunks.

I haven't seen any reports of this triggering on an unpatched
kernel.

Fixes: commit 76b043848f ("x86/retpoline: Add initial retpoline support")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Matt Rickard <matt@softrans.com.au>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Vas Dias <jason.vas.dias@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/c76538cd3afbe19c6246c2d1715bc6a60bd63985.1534448381.git.luto@kernel.org
2018-08-20 18:04:41 +02:00
Vasily Gorbik 2f4df0017b tracing: Add -mcount-nop option support
-mcount-nop gcc option generates the calls to the profiling functions
as nops which allows to avoid patching mcount jump with NOP instructions
initially.

-mcount-nop gcc option will be activated if platform selects
HAVE_NOP_MCOUNT and gcc actually supports it.
In addition to that CC_USING_NOP_MCOUNT is defined and could be used by
architectures to adapt ftrace patching behavior.

Link: http://lkml.kernel.org/r/patch-3.thread-aa7b8d.git-e02ed2dc082b.your-ad-here.call-01533557518-ext-9465@work.hours

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-15 22:38:38 -04:00
Vasily Gorbik 07d0408120 tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
Currently if CONFIG_FTRACE_MCOUNT_RECORD is enabled -mrecord-mcount
compiler flag support is tested for every Makefile.

Top 4 cc-option usages:
    511 -mrecord-mcount
     11  -fno-stack-protector
      9 -Wno-override-init
      2 -fsched-pressure

To address that move cc-option from scripts/Makefile.build to top Makefile
and export CC_USING_RECORD_MCOUNT to be used in original place.

While doing that also add -mrecord-mcount to CC_FLAGS_FTRACE (if gcc
actually supports it).

Link: http://lkml.kernel.org/r/patch-2.thread-aa7b8d.git-de935bace15a.your-ad-here.call-01533557518-ext-9465@work.hours

Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-15 22:37:22 -04:00
Vasily Gorbik f28bc3c32c tracing: Handle CC_FLAGS_FTRACE more accurately
CC_FLAGS_FTRACE is exported and later used to remove ftrace relevant
build flags from files which should be built without ftrace support.
For that reason add -mfentry to CC_FLAGS_FTRACE as well. That fixes
a problem with vdso32 build on s390, where -mfentry could not be used
together with -m31 flag.

At the same time flags like -pg and -mfentry are not relevant for asm
files, so avoid adding them to KBUILD_AFLAGS.

Introduce CC_FLAGS_USING instead of CC_USING_FENTRY to collect
-DCC_USING_FENTRY (and future alike) which are relevant for both
KBUILD_CFLAGS and KBUILD_AFLAGS.

Link: http://lkml.kernel.org/r/patch-1.thread-aa7b8d.git-42971afe87de.your-ad-here.call-01533557518-ext-9465@work.hours

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-15 22:36:12 -04:00
Linus Torvalds 01f0e5cded Kconfig updates for v4.19
- show clearer error messages where pkg-config is needed, but not
   installed
 
 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics
 
 - create all necessary directories by Kconfig tool itself instead
   of Makefile
 
 - update the .config unconditionally when syncconfig is invoked
 
 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory
 
 - do not try to update the .config when running install targets
 
 - add .DELETE_ON_ERROR to delete partially updated files
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFbBAAoJED2LAQed4NsGJbQP/icdG5Cj8YVuIlqBEe50KkbT
 V0jJdCyxSSUXiuTaGlFJ4RFlcbH9+4JcMdGIHqRrrtW0UpqXNcHgIOjbCaq4zLCw
 oRtva0/VC3KVlNDZR702t58t8os3qS03XuuRd1bBao19Mje7YOtHGrBfaEmZ3TIV
 jn9TX3K8PxPE8NLRuY5P3OT4fEeeUwXbleo5RuReQR8mWY3p6Gf8YjJ/mxDnoSbF
 gnot+ahWKdvJBjAbbTgoFePM7zOp4YA6Z1Nw0OerXKbchLG2D/wyDNbS2AnME3TR
 RSFuEZL3LqkZlVN1q7oQ0kzVuafghcUSx5LiRovejw7ZRemU30ixqSTZ6w6aL3X8
 nvm+arCGPS85v6RiPEnDMI9iXaqA0+yhwdKi3OLhoOEz+Y8G74JkOZErIoVpE2Ok
 wrSrmLzLzx6kcOaL50hhWQ5Jm3SGclFO1+uEcMP2vSRrrUJlkrBRvpLm+BInFVYS
 HnifGBSD73+UIrVmAcEM30YXUX4kFDoLWUd659nop270vr1JZr2/ie+WODH/fsfn
 aSDQq7AUbwybYHcSnzrv/eiZ5xiDBXcfRsvAcjpwzrUzpj6mM95XwBFOk7O/4a5w
 SuXiMSPbf/zemKhVp2wk6/nxS8SI07qEpXYMRcf3JL/kcT0KDg2/sPou//beYC56
 /s3cTXUlMrG7KTTfr0jz
 =/Dow
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - show clearer error messages where pkg-config is needed, but not
   installed

 - rename SYMBOL_AUTO to SYMBOL_NO_WRITE to reflect its semantics

 - create all necessary directories by Kconfig tool itself instead of
   Makefile

 - update the .config unconditionally when syncconfig is invoked

 - use 'include' directive instead of '-include' where
   include/config/{auto,tristate}.conf is mandatory

 - do not try to update the .config when running install targets

 - add .DELETE_ON_ERROR to delete partially updated files

 - misc cleanups and fixes

* tag 'kconfig-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove P_ENV property type
  kconfig: remove unused sym_get_env_prop() function
  kconfig: fix the rule of mainmenu_stmt symbol
  init/Kconfig: Use short unix-style option instead of --longname
  Kbuild: Makefile.modbuiltin: include auto.conf and tristate.conf mandatory
  kbuild: remove auto.conf from prerequisite of phony targets
  kbuild: do not update config for 'make kernelrelease'
  kbuild: do not update config when running install targets
  kbuild: add .DELETE_ON_ERROR special target
  kbuild: use 'include' directive to load auto.conf from top Makefile
  kconfig: allow all config targets to write auto.conf if missing
  kconfig: make syncconfig update .config regardless of sym_change_count
  kconfig: create directories needed for syncconfig by itself
  kconfig: remove unneeded directory generation from local*config
  kconfig: split out useful helpers in confdata.c
  kconfig: rename file_write_dep and move it to confdata.c
  kconfig: fix typos in description of "choice" in kconfig-language.txt
  kconfig: handle format string before calling conf_message_callback()
  kconfig: rename SYMBOL_AUTO to SYMBOL_NO_WRITE
  kconfig: check for pkg-config on make {menu,n,g,x}config
2018-08-15 12:50:10 -07:00
Linus Torvalds e026bcc561 Kbuild updates for v4.19
- verify depmod is installed before modules_install
 
 - support build salt in case build ids must be unique between builds
 
 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS
 
 - update buildtar script to drop vax support, add arm64 support
 
 - update builddeb script for better debarch support
 
 - document the pit-fall of if_changed usage
 
 - fix parallel build of UML with O= option
 
 - make 'samples' target depend on headers_install to fix build errors
 
 - remove deprecated host-progs variable
 
 - add a new coccinelle script for refcount_t vs atomic_t check
 
 - improve double-test coccinelle script
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky
 MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev
 Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ
 qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq
 LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX
 PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ
 TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7
 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN
 dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN
 ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ
 OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9
 KGB0LYYCqGSOHR4zOjg0
 =VjfG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - verify depmod is installed before modules_install

 - support build salt in case build ids must be unique between builds

 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS

 - update buildtar script to drop vax support, add arm64 support

 - update builddeb script for better debarch support

 - document the pit-fall of if_changed usage

 - fix parallel build of UML with O= option

 - make 'samples' target depend on headers_install to fix build errors

 - remove deprecated host-progs variable

 - add a new coccinelle script for refcount_t vs atomic_t check

 - improve double-test coccinelle script

 - misc cleanups and fixes

* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  coccicheck: return proper error code on fail
  Coccinelle: doubletest: reduce side effect false positives
  kbuild: remove deprecated host-progs variable
  kbuild: make samples really depend on headers_install
  um: clean up archheaders recipe
  kbuild: add %asm-generic to no-dot-config-targets
  um: fix parallel building with O= option
  scripts: Add Python 3 support to tracing/draw_functrace.py
  builddeb: Add automatic support for sh{3,4}{,eb} architectures
  builddeb: Add automatic support for riscv* architectures
  builddeb: Add automatic support for m68k architecture
  builddeb: Add automatic support for or1k architecture
  builddeb: Add automatic support for sparc64 architecture
  builddeb: Add automatic support for mips{,64}r6{,el} architectures
  builddeb: Add automatic support for mips64el architecture
  builddeb: Add automatic support for ppc64 and powerpcspe architectures
  builddeb: Introduce functions to simplify kconfig tests in set_debarch
  builddeb: Drop check for 32-bit s390
  builddeb: Change architecture detection fallback to use dpkg-architecture
  builddeb: Skip architecture detection when KBUILD_DEBARCH is set
  ...
2018-08-15 12:09:03 -07:00
Linus Torvalds 94710cac0e Linux 4.18 2018-08-12 13:41:04 -07:00
Masahiro Yamada 3fca1700c4 kbuild: make samples really depend on headers_install
Kernel headers must be installed into $(objtree)/usr/include to avoid
the build failure of samples.

Commit ddea05fa14 ("kbuild: make samples depend on headers_install")
addressed this, but "samples/" is only used for the single target build.

"make samples/" properly installs kernel headers, but it does not work
for general building because a phony target "sample" (no trailing slash)
is used.

Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: David Howells <dhowells@redhat.com>
2018-08-09 21:50:18 +09:00
Masahiro Yamada 63e31a67f1 kbuild: add %asm-generic to no-dot-config-targets
asm-generic and uapi-asm-generic do not depend on the kernel
configuration.  In fact, uapi-asm-generic is the prerequisite of
headers_{install,check}, hence it should not require the .config file.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Richard Weinberger <richard@nod.at>
2018-08-07 21:30:29 +09:00
Linus Torvalds 1ffaddd029 Linux 4.18-rc8 2018-08-05 12:37:41 -07:00
Linus Torvalds acb1872577 Linux 4.18-rc7 2018-07-29 14:44:52 -07:00
Masahiro Yamada 43fee2b238 kbuild: do not redirect the first prerequisite for filechk
Currently, filechk unconditionally opens the first prerequisite and
redirects it as the stdin of a filechk_* rule.  Hence, every target
using $(call filechk,...) must list something as the first prerequisite
even if it is unneeded.

'< $<' is actually unneeded in most cases.  Each rule can explicitly
adds it if necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-28 10:34:10 +09:00
Masahiro Yamada 2063945fdc kbuild: remove auto.conf from prerequisite of phony targets
The top-level Makefile adds include/config/auto.conf as
prerequisites of 'scripts', 'prepare1', etc.

They were needed to terminate the build when include/config/auto.conf
is missing.

Now that the inclusion of include/config/auto.conf is mandatory
in the top-level Makefile if dot-config is 1 (Note 'include' directive
is used instead of '-include').

Make terminates the build by itself if it fails to create or update
include/config/auto.conf so we are sure that include/config/auto.conf
exists in the very first stage of make.

I am still keeping include/config/auto.conf as the prerequisite of
%/modules.builtin because modules.builtin is a real file.  According
to commit a6c366324c ("kbuild: Do not unnecessarily regenerate
modules.builtin"), it is intentional to compare time-stamps between
%/modules.builtin and include/config/auto.conf .  I moved tristate.conf
here because it is only included from scripts/Makefile.modbuiltin.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:32 +09:00
Masahiro Yamada a29d4d8c56 kbuild: do not update config for 'make kernelrelease'
'make kernelrelease' depends on CONFIG_LOCALVERSION(_AUTO), but
for the same reason as install targets, we do not want to update
the configuration just for printing the kernelrelease string.

This is likely to happen when you compiled the kernel with
CROSS_COMPILE, but forget to pass it to 'make kernelrelease'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:32 +09:00
Masahiro Yamada d79424137a kbuild: do not update config when running install targets
"make syncconfig" is automatically invoked when any of the following
happens:

 - .config is updated
 - any of Kconfig files is updated
 - any of environment variables referenced in Kconfig is changed

Then, it updates configuration files such as include/config/auto.conf
include/generated/autoconf.h, etc.

Even install targets (install, modules_install, etc.) are no exception.
However, they should never ever modify the source tree.  Install
targets are often run with root privileges.  Once those configuration
files are owned by root, "make mrproper" would end up with permission
error.

Install targets should just copy things blindly.  They should not care
whether the configuration is up-to-date or not.  This makes more sense
because we are interested in the configuration that was used in the
previous kernel building.

This issue has existed since before, but rarely happened.  I expect
more chance where people are hit by this; with the new Kconfig syntax
extension, the .config now contains the compiler information.  If you
cross-compile the kernel with CROSS_COMPILE, but forget to pass it
for "make install", you meet "any of environment variables referenced
in Kconfig is changed" because $(CC) is referenced in Kconfig.
Another scenario is the compiler upgrade before the installation.

Install targets need the configuration.  "make modules_install" refer
to CONFIG_MODULES etc.  "make dtbs_install" also needs CONFIG_ARCH_*
to decide which dtb files to install.  However, the auto-update of
the configuration files should be avoided.  We already do this for
external modules.

Now, Make targets are categorized into 3 groups:

[1] Do not need the kernel configuration at all

    help, coccicheck, headers_install etc.

[2] Need the latest kernel configuration

    If new config options are added, Kconfig will show prompt to
    ask user's selection.

    Build targets such as vmlinux, in-kernel modules are the cases.

[3] Need the kernel configuration, but do not want to update it

    Install targets except headers_install, and external modules
    are the cases.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:32 +09:00
Masahiro Yamada 0a16d2e8cb kbuild: use 'include' directive to load auto.conf from top Makefile
When you build targets that require the kernel configuration, dot-config
is set to 1, then the top-level Makefile includes auto.conf.  However,
Make considers its inclusion is optional because the '-include' directive
is used here.

If a necessary configuration file is missing for the external module
building, the following error message is displayed:

  ERROR: Kernel configuration is invalid.
         include/generated/autoconf.h or include/config/auto.conf are missing.
         Run 'make oldconfig && make prepare' on kernel src to fix it.

However, Make still continues building; /bin/false let the creation of
'include/config/auto.config' fail, but Make can ignore the error since
it is included by the '-include' directive.

I guess the reason of using '-include' directive was to suppress
the warning when you build the kernel from a pristine source tree:

  Makefile:605: include/config/auto.conf: No such file or directory

The previous commit made sure include/config/auto.conf exists after
the 'make *config' stage.  Now, we can use the 'include' directive
without showing the warning.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25 23:25:31 +09:00
Linus Torvalds d72e90f33a Linux 4.18-rc6 2018-07-22 14:12:20 -07:00
Laura Abbott f92d19e0ef kbuild: Use HOST*FLAGS options from the command line
Now that we have the rename in place, reuse the HOST*FLAGS options as
something that can be set from the command line and included with the
rest of the flags.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Laura Abbott 8377bd2b9e kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Laura Abbott b90a368000 kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGS
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS
to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not
have any visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Laura Abbott 10844aebf4 kbuild: Rename HOSTCXXFLAGS to KBUILD_HOSTCXXFLAGS
In preparation for enabling command line CXXFLAGS, re-name HOSTCXXFLAGS
to KBUILD_HOSTCXXFLAGS as the internal use only flags. This should not
have any visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Laura Abbott 96f14fe738 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Linus Torvalds 9d3cce1e8b Linux 4.18-rc5 2018-07-15 12:49:31 -07:00
Linus Torvalds 79facf308f Kbuild fixes for v4.18 (2nd)
- update Kbuild and Kconfig documents
 
  - sanitize -I compiler option handling
 
  - update extract-vmlinux script to recognize LZ4 and ZSTD
 
  - fix tools Makefiles
 
  - update tags.sh to handle __ro_after_init
 
  - suppress warnings in case getconf does not recognize LFS_* parameters
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbSK5LAAoJED2LAQed4NsGOJQP/3bwaUKcOgWyBeYD1l/lcu5q
 spysRnxR7e+7Lp/HQV0v2XzOM9G0DWBA+j/dYUp8RcPsWOrXJkM8QkNk584YfxBY
 ve0q/6QlUGmjgiizdT86xYpKhCfdF2uSnx7QvM9qXyt+WlyVzmeK1QatwDmcMuPF
 ZLgi7P8XQ4uaUTIYss79SpDAMOCyCOHa2bapiiqJ2azR32L1AiwRF36u1bCVKMIC
 gfcPRN2XjOkJfp/l5JYzJbr28uE80n9d0b9ua+vO8aKs4RGBiLwM2ci+43EPH19i
 yNrgfBkjOO3HVCpS60STHARktNx+osSfMjTFP3xg+5vyIDwbqJl0+hgNEXRRUsCq
 nSA7uvRwppnvPLWuI3/iaE0BvN1rBqVssateylsuOIfrcgFb71WAHCGWX+9t1QT5
 4V3kkH+QgqEEFQg7BUrXI9ccTpT28vDBKjRD4O8O/SLtWo0GprXvuje6ZxZpa/ob
 8V2MVcdPuLamZkSCy2I6pIIfNZ0wifI6/WX1HQ0A0VzOw5dJWH4qO/DMy7l8vw3m
 fP84E79011PZ8BByrEE1EZ0cWeMGInoyC3Q5BmB0b4R2uxSC2vEhCct4MJpOxVYQ
 gUBgiti33mkvHmpZKGTgt89+71X3u26HYOjgTO2vnffSYpKGdYkDAhMyxxw9EqqJ
 AcBKpL1fxz2Ik7DgW75J
 =aXcg
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - update Kbuild and Kconfig documents

 - sanitize -I compiler option handling

 - update extract-vmlinux script to recognize LZ4 and ZSTD

 - fix tools Makefiles

 - update tags.sh to handle __ro_after_init

 - suppress warnings in case getconf does not recognize LFS_* parameters

* tag 'kbuild-fixes-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: suppress warnings from 'getconf LFS_*'
  scripts/tags.sh: add __ro_after_init
  tools: build: Use HOSTLDFLAGS with fixdep
  tools: build: Fixup host c flags
  tools build: fix # escaping in .cmd files for future Make
  scripts: teach extract-vmlinux about LZ4 and ZSTD
  kbuild: remove duplicated comments about PHONY
  kbuild: .PHONY is not a variable, but PHONY is
  kbuild: do not drop -I without parameter
  kbuild: document the KBUILD_KCONFIG env. variable
  kconfig: update user kconfig tools doc.
  kbuild: delete INSTALL_FW_PATH from kbuild documentation
  kbuild: update ARCH alias info for sparc
  kbuild: update ARCH alias info for sh
2018-07-13 12:15:12 -07:00
Masahiro Yamada 6d79a7b424 kbuild: suppress warnings from 'getconf LFS_*'
Suppress warnings for systems that do not recognize LFS_*.

 getconf: no such configuration parameter `LFS_CFLAGS'
 getconf: no such configuration parameter `LFS_LDFLAGS'
 getconf: no such configuration parameter `LFS_LIBS'

Fixes: d7f14c66c2 ("kbuild: Enable Large File Support for hostprogs")
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2018-07-13 00:48:18 +09:00
Linus Torvalds 1e4b044d22 Linux 4.18-rc4 2018-07-08 16:34:02 -07:00
Ulf Magnusson bd412d81b7 kbuild: .PHONY is not a variable, but PHONY is
.PHONY is a target, not a variable.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-06 22:04:02 +09:00
Linus Torvalds 4e33d7d479 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.

 2) Need to bump memory lock rlimit for test_sockmap bpf test, from
    Yonghong Song.

 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.

 4) Fix uninitialized read in nf_log, from Jann Horn.

 5) Fix raw command length parsing in mlx5, from Alex Vesker.

 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
    Varadhan.

 7) Fix regressions in FIB rule matching during create, from Jason A.
    Donenfeld and Roopa Prabhu.

 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.

 9) More bpfilter build fixes/adjustments from Masahiro Yamada.

10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
    Dangaard Brouer.

11) fib_tests.sh file permissions were broken, from Shuah Khan.

12) Make sure BH/preemption is disabled in data path of mac80211, from
    Denis Kenzior.

13) Don't ignore nla_parse_nested() return values in nl80211, from
    Johannes berg.

14) Properly account sock objects ot kmemcg, from Shakeel Butt.

15) Adjustments to setting bpf program permissions to read-only, from
    Daniel Borkmann.

16) TCP Fast Open key endianness was broken, it always took on the host
    endiannness. Whoops. Explicitly make it little endian. From Yuching
    Cheng.

17) Fix prefix route setting for link local addresses in ipv6, from
    David Ahern.

18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.

19) Various bpf sockmap fixes, from John Fastabend.

20) Use after free for GRO with ESP, from Sabrina Dubroca.

21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
    Eric Biggers.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  qede: Adverstise software timestamp caps when PHC is not available.
  qed: Fix use of incorrect size in memcpy call.
  qed: Fix setting of incorrect eswitch mode.
  qed: Limit msix vectors in kdump kernel to the minimum required count.
  ipvlan: call dev_change_flags when ipvlan mode is reset
  ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
  net: fix use-after-free in GRO with ESP
  tcp: prevent bogus FRTO undos with non-SACK flows
  bpf: sockhash, add release routine
  bpf: sockhash fix omitted bucket lock in sock_close
  bpf: sockmap, fix smap_list_map_remove when psock is in many maps
  bpf: sockmap, fix crash when ipv6 sock is added
  net: fib_rules: bring back rule_exists to match rule during add
  hv_netvsc: split sub-channel setup into async and sync
  net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
  atm: zatm: Fix potential Spectre v1
  s390/qeth: consistently re-enable device features
  s390/qeth: don't clobber buffer on async TX completion
  s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
  s390/qeth: fix race when setting MAC address
  ...
2018-07-02 11:18:28 -07:00
Linus Torvalds 021c91791a Linux 4.18-rc3 2018-07-01 16:04:53 -07:00
Masahiro Yamada 88e85a7daf bpfilter: check compiler capability in Kconfig
With the brand-new syntax extension of Kconfig, we can directly
check the compiler capability in the configuration phase.

If the cc-can-link.sh fails, the BPFILTER_UMH is automatically
hidden by the dependency.

I also deleted 'default n', which is no-op.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28 13:36:39 +09:00
Linus Torvalds 7daf201d7f Linux 4.18-rc2 2018-06-24 20:54:29 +08:00
Linus Torvalds ce397d215c Linux 4.18-rc1 2018-06-17 08:04:49 +09:00
Linus Torvalds 050e9baa9d Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.

Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-14 12:21:18 +09:00
Masahiro Yamada 5aadfdeb8d kcov: test compiler capability in Kconfig and correct dependency
As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
be used with care - it forces a lower limit of another symbol, ignoring
the dependency.  Currently, KCOV can select GCC_PLUGINS even if arch
does not select HAVE_GCC_PLUGINS.  This could cause the unmet direct
dependency.

Now that Kconfig can test compiler capability, let's handle this in a
more sophisticated way.

There are two ways to enable KCOV; use the compiler that natively
supports -fsanitize-coverage=trace-pc, or build the SANCOV plugin if
the compiler has ability to build GCC plugins.  Hence, the correct
dependency for KCOV is:

  depends on CC_HAS_SANCOV_TRACE_PC || GCC_PLUGINS

You do not need to build the SANCOV plugin if the compiler already
supports -fsanitize-coverage=trace-pc.  Hence, the select should be:

  select GCC_PLUGIN_SANCOV if !CC_HAS_SANCOV_TRACE_PC

With this, GCC_PLUGIN_SANCOV is selected only when necessary, so
scripts/Makefile.gcc-plugins can be cleaner.

I also cleaned up Kconfig and scripts/Makefile.kcov as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-06-11 09:14:08 +09:00
Masahiro Yamada 2a61f4747e stack-protector: test compiler capability in Kconfig and drop AUTO mode
Move the test for -fstack-protector(-strong) option to Kconfig.

If the compiler does not support the option, the corresponding menu
is automatically hidden.  If STRONG is not supported, it will fall
back to REGULAR.  If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.

I also turned the 'choice' into only two boolean symbols.  The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.

X86 has additional shell scripts in case the compiler supports those
options, but generates broken code.  I added CC_HAS_SANE_STACKPROTECTOR
to test this.  I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
2018-06-08 18:56:00 +09:00
Masahiro Yamada 315bab4e97 kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
Commit 21c54b7747 ("kconfig: show compiler version text in the top
comment") was intended to detect the compiler upgrade, but Geert
reported a breakage on the m68k build.

The compiler upgrade is detected by the change of the environment
variable, CC_VERSION_TEXT, which contains the first line of the output
from $(CC) --version.  Currently, this works well when CROSS_COMPILE
is given via the environment variable or the Make command line.

However, some architectures such as m68k can specify CROSS_COMPILE
from arch/$(SRCARCH)/Makefile as well.  In this case, "make ARCH=m68k"
ends up with endless syncconfig loop.

  $ make ARCH=m68k defconfig
  *** Default configuration is based on 'multi_defconfig'
  #
  # configuration written to .config
  #
  $ make ARCH=m68k
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig
  scripts/kconfig/conf  --syncconfig Kconfig

Things are happening like this:

Because arch/$(SRCARCH)/Makefile is included after CC_VERSION_TEXT
is set, it contains the host compiler version in the defconfig phase.

To create or update auto.conf, the following line is triggered:

include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
        $(Q)$(MAKE) -f $(srctree)/Makefile syncconfig

This recurses the top Makefile after arch/$(SRCARCH)/Makefile is
included.  CROSS_COMPILE is set to a m68k toolchain prefix and
exported to the recursed Make.  Then, syncconfig is invoked with
the target compiler version in CC_VERSION_TEXT.

The Make will restart because auto.conf and auto.conf.cmd have been
updated.  At this point, CROSS_COMPILE is reset, so CC_VERSION_TEXT
is set to the host compiler version again.  Then, syncconfig is
triggered due to the change of CC_VERSION_TEXT.  This loop continues
eternally.

To fix this problem, $(CC_VERSION_TEXT) must be evaluated only after
arch/$(SRCARCH)/Makefile.  Setting it earlier is OK as long as it is
defined by using the '=' operator instead of ':='.

For the defconfig phase, $(CC_VERSION_TEXT) is evaluated when Kbuild
descends into scripts/kconfig/, so it contains the target compiler
version correctly.

include/config/auto.conf.cmd references $(CC_VERSION_TEXT) as well,
so it must be included after arch/$(SRCARCH)/Makefile.

Fixes: 21c54b7747 ("kconfig: show compiler version text in the top comment")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-06-08 18:55:36 +09:00
Linus Torvalds 1c8c5a9d38 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...
2018-06-06 18:39:49 -07:00
Linus Torvalds 0ad39cb3d7 Kconfig updates for v4.18
Kconfig now supports new functionality to perform textual substitution.
 It has been a while since Linus suggested to move compiler option tests
 from makefiles to Kconfig. Finally, here it is. The implementation has
 been generalized into a Make-like macro language. Some built-in functions
 such as 'shell' are provided. Variables and user-defined functions are
 also supported so that 'cc-option', 'ld-option', etc. are implemented as
 macros.
 
 Summary:
 
 - refactor package checks for building {m,n,q,g}conf
 
 - remove unused/unmaintained localization support
 
 - remove Kbuild cache
 
 - drop CONFIG_CROSS_COMPILE support
 
 - replace 'option env=' with direct variable expansion
 
 - add built-in functions such as 'shell'
 
 - support variables and user-defined functions
 
 - add helper macros as as 'cc-option'
 
 - add unit tests and a document of the new macro language
 
 - add 'testconfig' to help
 
 - fix warnings from GCC 8.1
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbGBJPAAoJED2LAQed4NsG9QEP/24saP6Q3uF68yOsXcyE7yL0
 VW6acNpCXFjyQZQuHB9JntD9oftSfPuY73mjVKPRvL29NopbFbe7O7wAOYSRvsZT
 cTZ5KF0FpG0enP6qUUiVpGZPGiSXKu21Lr/WrCdS889O2g5NxCB6OameQLjXkz5P
 EZb+QZD6drzYkXjipLJoliFJAhsbaACxmuCgO1gpg+qAEOm/fCnRk1qVwKffH21Z
 YlKMpw0FR3IdZA/cYp5Bh/WiICaCXs8lmMupHb4BHL4SvJGXxMEnuyt1txXANJcv
 3nTxsMPwjdCGboEgCavbcUnTaONnFK6IdGhdSntsf1aKRqHntiA/cwqmJl2RX/6v
 ObX85dRjvyKq+qh9wEGvUle0LQYxhvJJ4NyWX5+wiRB6wzPCuqTPL0I1y6UPwAkQ
 JveUswQ7u3+dCBwuHeXFHWvpviNFkWO+Gc8E2h1PKroG0Tz3HpoQclvcZjsOXrRt
 HX2+6EsuYK2LnabwQzk4TRkI7JnTKpLGG/YoM4H360bNHs5KUwgm6g5V9Oo4L3E+
 A5Jbow5siKtn7lIR9TXDou6O6F7L+bMiK+PlydPiv085EqUfhP+rkiJu9sb18GPD
 dsMXeTN51cJYLtDNiZ9tnPBtTB6Wvk7K1Dcmf3/t3rWVy35tjgl0RdxEySU153Pk
 n62ftyGGyUldBSzWcGWR
 =o37+
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:
 "Kconfig now supports new functionality to perform textual
  substitution. It has been a while since Linus suggested to move
  compiler option tests from makefiles to Kconfig. Finally, here it is.

  The implementation has been generalized into a Make-like macro
  language.

  Some built-in functions such as 'shell' are provided. Variables and
  user-defined functions are also supported so that 'cc-option',
  'ld-option', etc. are implemented as macros.

  Summary:

   - refactor package checks for building {m,n,q,g}conf

   - remove unused/unmaintained localization support

   - remove Kbuild cache

   - drop CONFIG_CROSS_COMPILE support

   - replace 'option env=' with direct variable expansion

   - add built-in functions such as 'shell'

   - support variables and user-defined functions

   - add helper macros as as 'cc-option'

   - add unit tests and a document of the new macro language

   - add 'testconfig' to help

   - fix warnings from GCC 8.1"

* tag 'kconfig-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: Avoid format overflow warning from GCC 8.1
  kbuild: Move last word of nconfig help to the previous line
  kconfig: Add testconfig into make help output
  kconfig: add basic helper macros to scripts/Kconfig.include
  kconfig: show compiler version text in the top comment
  kconfig: test: add Kconfig macro language tests
  Documentation: kconfig: document a new Kconfig macro language
  kconfig: error out if a recursive variable references itself
  kconfig: add 'filename' and 'lineno' built-in variables
  kconfig: add 'info', 'warning-if', and 'error-if' built-in functions
  kconfig: expand lefthand side of assignment statement
  kconfig: support append assignment operator
  kconfig: support simply expanded variable
  kconfig: support user-defined function and recursively expanded variable
  kconfig: begin PARAM state only when seeing a command keyword
  kconfig: replace $(UNAME_RELEASE) with function call
  kconfig: add 'shell' built-in function
  kconfig: add built-in function support
  kconfig: make default prompt of mainmenu less specific
  kconfig: remove sym_expand_string_value()
  ...
2018-06-06 11:31:45 -07:00
Linus Torvalds 8715ee75fe Kbuild updates for v4.18
- improve fixdep to coalesce consecutive slashes in dep-files
 
 - fix some issues of the maintainer string generation in deb-pkg script
 
 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts
 
 - clean-up modpost
 
 - allow to enable the dead code/data elimination for PowerPC in EXPERT mode
 
 - improve two coccinelle scripts for better performance
 
 - pass endianness and machine size flags to sparse for all architecture
 
 - misc fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbF/yvAAoJED2LAQed4NsGEPgP/2qBg7w4raGvQtblqGY1qo6j
 3xGKYUKdg3GhIRf1zB9lPwkAmQcyLKzKlet/gYoTUTLKbfRUX8wDzJf/3TV0kpLW
 QQ2HM1/jsqrD1HSO21OPJ1rzMSNn1NcOSLWSeOLWUBorHkkvAHlenJcJSOo6szJr
 tTgEN78T/9id/artkFqdG+1Q3JhnI5FfH3u0lE20Eqxk5AAxrUKArHYsgRjgOg9o
 8DlHDTRsnTiUd4TtmC+VYSZK1BHz1ORlANaRiL69T+BGFZGNCvRSV09QkaD+ObxT
 dB4TTJne32Qg6g5qYX0bzLqfRdfJ8tpmJGQkycf3OT1rLgmDbWFaaOEDQTAe3mSw
 nT6ZbpQB1OoTgMD2An9ApWfUQRfsMnujm/pRP+BkRdKKkMJvXJCH7PvFw8rjqTt3
 PjK6DGbpG6H0G+DePtthMHrz/TU6wi5MFf7kQxl0AtFmpa3R0q67VhdM04BEYNCq
 Dbs1YaXWKKi101k14oSQ0kmRasZ9Jz5tvyfZ7wvy1LpGONXxtEbc6JQyBJ6tmf4f
 fCAxvHLSb/TQSmJhk9Rch7uPYT9B9hC16dseMrF9Pab8yR346fz70L1UdFE10j3q
 iKFbYkueq8uJCJDxNktsgHzbOF6Le5vaWauOafRN26K7p7+CRpVOy0O2bknX3yDa
 hKOGzCfQjT8sfdMmtyIH
 =2LYT
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - improve fixdep to coalesce consecutive slashes in dep-files

 - fix some issues of the maintainer string generation in deb-pkg script

 - remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
   several tools and linker scripts

 - clean-up modpost

 - allow to enable the dead code/data elimination for PowerPC in EXPERT
   mode

 - improve two coccinelle scripts for better performance

 - pass endianness and machine size flags to sparse for all architecture

 - misc fixes

* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: add machine size to CHECKFLAGS
  kbuild: add endianness flag to CHEKCFLAGS
  kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
  scripts: Fixed printf format mismatch
  scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
  coccinelle: deref_null: improve performance
  coccinelle: mini_lock: improve performance
  powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
  kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
  kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
  kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
  modpost: constify *modname function argument where possible
  modpost: remove redundant is_vmlinux() test
  modpost: use strstarts() helper more widely
  modpost: pass struct elf_info pointer to get_modinfo()
  checkpatch: remove VMLINUX_SYMBOL() check
  vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
  kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
  export.h: remove code for prefixing symbols with underscore
  depmod.sh: remove symbol prefix support
  ...
2018-06-06 11:00:15 -07:00
Alexei Starovoitov 819dd92b9c bpfilter: switch to CC from HOSTCC
check that CC can build executables and use that compiler instead of HOSTCC

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05 10:21:18 -04:00
Linus Torvalds 29dcea8877 Linux 4.17 2018-06-03 14:15:21 -07:00
Luc Van Oostenryck 1f2f01b122 kbuild: add machine size to CHECKFLAGS
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.

This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.

Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-01 11:36:58 +09:00
Luc Van Oostenryck 145167650b kbuild: add endianness flag to CHEKCFLAGS
The kernel depends on macros like __BYTE_ORDER__,
__BIG_ENDIAN__ or __LITTLE_ENDIAN__.

OTOH, sparse doesn't know about the endianness of the kernel and
by default uses the same as the machine on which sparse was built.

Ensure that sparse can predefine the macros corresponding to
how the kernel was configured by adding -m{big,little}-endian
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the equivalent done in arch specific Makefiles.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 22:05:08 +09:00
Luc Van Oostenryck 59f7b5847b kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
Currently, $(CHECK) receives NOSTDINC_FLAGS twice:
* first directly in the main Makefile via CHECKFLAGS,
* then indirectly in scripts/Makefile.build via c_flags.

Since once is enough, leave the occurence via c_flags and
remove the one via CHECKFLAGS.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-29 22:04:47 +09:00
Masahiro Yamada 21c54b7747 kconfig: show compiler version text in the top comment
The kernel configuration phase is now tightly coupled with the compiler
in use.  It will be nice to show the compiler information in Kconfig.

The compiler information will be displayed like this:

  $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- config
  scripts/kconfig/conf  --oldaskconfig Kconfig
  *
  * Linux/arm64 4.16.0-rc1 Kernel Configuration
  *
  *
  * Compiler: aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011
  *
  *
  * General setup
  *
  Compile also drivers which will not load (COMPILE_TEST) [N/y/?]

If you use GUI methods such as menuconfig, it will be displayed in the
top menu.

This is simply implemented by using the 'comment' statement.  So, it
will be saved into the .config file as well.

This commit has a very important meaning.  If the compiler is upgraded,
Kconfig must be re-run since different compilers have different sets
of supported options.

All referenced environments are written to include/config/auto.conf.cmd
so that any environment change triggers syncconfig, and prompt the user
to input new values if needed.

With this commit, something like follows will be added to
include/config/auto.conf.cmd

  ifneq "$(CC_VERSION_TEXT)" "aarch64-linux-gnu-gcc (Linaro GCC 7.2-2017.11) 7.2.1 20171011"
  include/config/auto.conf: FORCE
  endif

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 2972666ac9 kconfig: replace $(UNAME_RELEASE) with function call
Now that 'shell' function is supported, this can be self-contained in
Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-05-29 03:31:19 +09:00
Masahiro Yamada 104daea149 kconfig: reference environment variables directly and remove 'option env='
To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:28:58 +09:00
Masahiro Yamada f1089c92da kbuild: remove CONFIG_CROSS_COMPILE support
Kbuild provides a couple of ways to specify CROSS_COMPILE:

[1] Command line
[2] Environment
[3] arch/*/Makefile (only some architectures)
[4] CONFIG_CROSS_COMPILE

[4] is problematic for the compiler capability tests in Kconfig.
CONFIG_CROSS_COMPILE allows users to change the compiler prefix from
'make menuconfig', etc.  It means, the compiler options would have
to be all re-calculated everytime CONFIG_CROSS_COMPILE is changed.

To avoid complexity and performance issues, I'd like to evaluate
the shell commands statically, i.e. only parsing Kconfig files.

I guess the majority is [1] or [2].  Currently, there are only
5 defconfig files that specify CONFIG_CROSS_COMPILE.
  arch/arm/configs/lpc18xx_defconfig
  arch/hexagon/configs/comet_defconfig
  arch/nds32/configs/defconfig
  arch/openrisc/configs/or1ksim_defconfig
  arch/openrisc/configs/simple_smp_defconfig

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:28:58 +09:00
Masahiro Yamada e08d6de4e5 kbuild: remove kbuild cache
The kbuild cache was introduced to remember the result of shell
commands, some of which are expensive to compute, such as
$(call cc-option,...).

However, this turned out not so clever as I had first expected.
Actually, it is problematic.  For example, "$(CC) -print-file-name"
is cached.  If the compiler is updated, the stale search path causes
build error, which is difficult to figure out.  Another problem
scenario is cache files could be touched while install targets are
running under the root permission.  We can patch them if desired,
but the build infrastructure is getting uglier and uglier.

Now, we are going to move compiler flag tests to the configuration
phase.  If this is completed, the result of compiler tests will be
naturally cached in the .config file.  We will not have performance
issues of incremental building since this testing only happens at
Kconfig time.

To start this work with a cleaner code base, remove the kbuild
cache first.

Revert the following commits:
Commit 9a234a2e38 ("kbuild: create directory for make cache only when necessary")
Commit e17c400ae1 ("kbuild: shrink .cache.mk when it exceeds 1000 lines")
Commit 4e56207130 ("kbuild: Cache a few more calls to the compiler")
Commit 3298b690b2 ("kbuild: Add a cache for generated variables")

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
2018-05-29 03:28:58 +09:00
Linus Torvalds b04e217704 Linux 4.17-rc7 2018-05-27 13:01:47 -07:00
Linus Torvalds 861d9dd375 Kbuild fixes for v4.17 (2nd)
- enable -fno-tree-loop-im only when supported
 
 - add -fno-PIE option before the asm-goto test
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbCkFPAAoJED2LAQed4NsGZVwP/juiS21QZAiQbUdX3FRcyYGs
 +FDNLOwNdSU18QkdVrcJ4tG8hxBZqhIU0kq1MVE72Yo10xX8u7ssUJ0ttrUo5qIb
 vlXtnqMOaZgLWnoNMGlDVPnNBxZh2UscbvjVGa5m9eqXrCU9AtQiCCoSceRtka12
 tOBbfeTeJ8Ab2BKfzHcuqS+DSURkQGTyG4q1ZMxmdtIsltbZIez/zauRtAU/ULKx
 Ed6HAdNiiMXRwsXnAwcGnJe9FyW7UPjZOdLn0vSizZQe8BJ+H+EotZy7FO8L407w
 lgLVccCSZEFAilJRR+Xa1pMlg1KwSINcMK9BVOjIeeZL0kAIaC1zzVaPEbZ1MyDA
 HKtX/MeDGX52ZW9SBCFQYKVsZQecYtyr27Z+c+8Af37sB3/ffBSeQc7YilsIGjSZ
 MWARYbkOAcUif8IG6ymnEv2a4IOcD4rYNMkUfs8vXeJjejiP5rhA8zxWYng1DRmw
 0g4x2iQeY7erUu/elflNa94e+PSgnwnmzWdloBqcmOtGxV+K+9BVaNsVmchyMAzt
 PbQq1T8zodfr2+Jsf+yj1rWv3fLnahYh/WVAKj1rB/+Q31sYfvPlEmzayk2k9enK
 Sgu5amtl64tgZD3zcSs1Ik39Ioe7s1Kf0W1Li8f2v1JR5t38UX5zkOa+O5w+sq77
 NSBoCCRtn0eY3j/wo5kS
 =r3P/
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild fixes from Masahiro Yamada:

 - enable '-fno-tree-loop-im' only when supported

 - add '-fno-PIE' option before the asm-goto test

* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile: disable PIE before testing asm goto
  kbuild: gcov: enable -fno-tree-loop-im if supported
2018-05-27 09:27:27 -07:00
Linus Torvalds 771c577c23 Linux 4.17-rc6 2018-05-20 15:31:38 -07:00
Nicholas Piggin 6ca8d9433d kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
Modules do not tend to cope with -ffunction-sections, even though they
do not link with -gc-sections. It may be possible for unused symbols to
be trimmed from modules, but in general that would take much more work
in architecture module linker scripts.

For now, enable these only for kernel build.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17 22:45:00 +09:00
Masahiro Yamada 5a144a1acd depmod.sh: remove symbol prefix support
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.

No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the last argument of scripts/depmod.sh can be removed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2018-05-17 22:44:52 +09:00
Michal Kubecek 8438ee76b0 Makefile: disable PIE before testing asm goto
Since commit e501ce957a ("x86: Force asm-goto"), aarch64 build on
distributions which enable PIE by default (e.g. openSUSE Tumbleweed) does
not detect support for asm goto correctly. The problem is that ARM specific
part of scripts/gcc-goto.sh fails with PIE even with recent gcc versions.
Moving the asm goto detection up in Makefile put it before the place where
we disable PIE. As a result, kernel is built without jump label support.

Move the lines disabling PIE before the asm goto test to make it work.

Fixes: e501ce957a ("x86: Force asm-goto")
Reported-by: Andreas Faerber <afaerber@suse.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17 22:36:40 +09:00
Nick Desaulniers c64ba044ed kbuild: gcov: enable -fno-tree-loop-im if supported
Clang does not recognize this compiler option.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-05-17 22:35:30 +09:00
Linus Torvalds 67b8d5c708 Linux 4.17-rc5 2018-05-13 16:15:17 -07:00
Linus Torvalds 75bc37fefc Linux 4.17-rc4 2018-05-06 16:57:38 -10:00
Linus Torvalds 6da6c0db53 Linux v4.17-rc3 2018-04-29 14:17:42 -07:00
Linus Torvalds 6d08b06e67 Linux 4.17-rc2 2018-04-22 19:20:09 -07:00
Linus Torvalds 60cc43fc88 Linux 4.17-rc1 2018-04-15 18:24:20 -07:00
Masahiro Yamada a73619a845 kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
The __FILE__ macro is used everywhere in the kernel to locate the file
printing the log message, such as WARN_ON(), etc.  If the kernel is
built out of tree, this can be a long absolute path, like this:

  WARNING: CPU: 1 PID: 1 at /path/to/build/directory/arch/arm64/kernel/foo.c:...

This is because Kbuild runs in the objtree instead of the srctree,
then __FILE__ is expanded to a file path prefixed with $(srctree)/.

Commit 9da0763bdd ("kbuild: Use relative path when building in a
subdir of the source tree") improved this to some extent; $(srctree)
becomes ".." if the objtree is a child of the srctree.

For other cases of out-of-tree build, __FILE__ is still the absolute
path.  It also means the kernel image depends on where it was built.

A brand-new option from GCC, -fmacro-prefix-map, solves this problem.
If your compiler supports it, __FILE__ is the relative path from the
srctree regardless of O= option.  This provides more readable log and
more reproducible builds.

Please note __FILE__ is always an absolute path for external modules.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada 4fa8bc949d kbuild: rename *-asn1.[ch] to *.asn1.[ch]
Our convention is to distinguish file types by suffixes with a period
as a separator.

*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc.  More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
  net/netfilter/nf_conntrack_h323_asn1.c
  include/linux/netfilter/nf_conntrack_h323_asn1.h
  include/linux/sunrpc/gss_asn1.h

Rename generated files to *.asn1.[ch] for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada 3ca3273eaa kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
Clean up these patterns from the top Makefile to omit 'clean-files'
in each Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada 9a8dfb394c kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers,
respectively.  Clean them up globally from the top Makefile.

Some of the final host programs those lexer/parser are linked into
are necessary for building external modules, but the intermediates
are unneeded.  They can be cleaned away by 'make clean' instead of
'make mrproper'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-07 19:04:02 +09:00
Linus Torvalds 147a89bc71 Kconfig updates for v4.17
- improve checkpatch for more precise Kconfig code checking
 
 - clarify effective selects by grouping reverse dependencies in help
 
 - do not write out '# CONFIG_FOO is not set' from invisible symbols
 
 - make oldconfig as silent as it should be
 
 - rename 'silentoldconfig' to 'syncconfig'
 
 - add unit-test framework and several test cases
 
 - warn unmet dependency of tristate symbols
 
 - make unmet dependency warnings readable, removing false positives
 
 - improve recursive include detection
 
 - use yylineno to simplify the line number tracking
 
 - misc cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaw6i1AAoJED2LAQed4NsGU7oP/Rc5DJmtQXbqONvEfVskfNzL
 NaQekDa4QuWRCbrAdRZM+8dlAgX76kXHd0I1LnL6XeCZ2KZ7f93zxpqBKHZAteGU
 Y6b06tDXiW9qIdI0wzfKB3KdZo0Jc1LELv7SMRrZ7+wFXZKmhh5M0mVX17sKrQai
 L3wPMqiu15ve2Ya9s8F8+PGFBZfqzhOBEzYij8YtTZWFWVEfoLDDD5YDUxQNcJrS
 FXO+fZH5EUpoWj+JseiIPuOKASChsyeqtwqCND444IrjqDQ0TLAyJSZJhSm+6bX3
 qP/yMH0K+kMMkvKp8CCnaTfwkOJ2BZo+91Ydw1mnqLdnZ8gZndnyexrBFubIv+fJ
 0KxX9IyGA+RBnwArsnF1yIoryktG3xtaR5diO2p5ztd8xgptKG+PqQfJ40DHjpu4
 iZNpoVPIPh669w/Dfx033t1RZVhov8Mau2dZ5RCtpvXAAS6oRe+UmaazqUGt7O2z
 V8ekSNL3g7FN3YYx0awXJWzX8e3BDMOcUjRvw/SI16XBk0BdHiBMrYfnRN+e3mpy
 FjhzZdXajJclNwMVbUOAPaQypvbBQJjBMy0ryz05ZyTPEsmJqM+WjkPSLDppnMYT
 8L3C5KSqC7WKdf1bj55YdGWyfyU0P9bCO026IClnvZNZDI/bg+3gB9ocyRfZG0sL
 0Q7GJF+BixbUUQeUcejm
 =sKto
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

 - improve checkpatch for more precise Kconfig code checking

 - clarify effective selects by grouping reverse dependencies in help

 - do not write out '# CONFIG_FOO is not set' from invisible symbols

 - make oldconfig as silent as it should be

 - rename 'silentoldconfig' to 'syncconfig'

 - add unit-test framework and several test cases

 - warn unmet dependency of tristate symbols

 - make unmet dependency warnings readable, removing false positives

 - improve recursive include detection

 - use yylineno to simplify the line number tracking

 - misc cleanups

* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: use yylineno option instead of manual lineno increments
  kconfig: detect recursive inclusion earlier
  kconfig: remove duplicated file name and lineno of recursive inclusion
  kconfig: do not include both curses.h and ncurses.h for nconfig
  kconfig: make unmet dependency warnings readable
  kconfig: warn unmet direct dependency of tristate symbols selected by y
  kconfig: tests: test if recursive inclusion is detected
  kconfig: tests: test if recursive dependencies are detected
  kconfig: tests: test randconfig for choice in choice
  kconfig: tests: test defconfig when two choices interact
  kconfig: tests: check visibility of tristate choice values in y choice
  kconfig: tests: check unneeded "is not set" with unmet dependency
  kconfig: tests: test if new symbols in choice are asked
  kconfig: tests: test automatic submenu creation
  kconfig: tests: add basic choice tests
  kconfig: tests: add framework for Kconfig unit testing
  kbuild: add PYTHON2 and PYTHON3 variables
  kconfig: remove redundant streamline_config.pl prerequisite
  kconfig: rename silentoldconfig to syncconfig
  kconfig: invoke oldconfig instead of silentoldconfig from local*config
  ...
2018-04-03 16:28:01 -07:00
Linus Torvalds 3b24b83763 Kbuild updates for v4.17
- add a shell script to get Clang version
 
 - improve portability of build scripts
 
 - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code
 
 - rename built-in.o which is now thin archive to built-in.a
 
 - process clean/build targets one by one to get along with -j option
 
 - simplify ld-option
 
 - improve building with CONFIG_TRIM_UNUSED_KSYMS
 
 - define KBUILD_MODNAME even for objects shared among multiple modules
 
 - avoid linking multiple instances of same objects from composite objects
 
 - move <linux/compiler_types.h> to c_flags to include it only for C files
 
 - clean-up various Makefiles
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaw6eWAAoJED2LAQed4NsGrK8QAJmbYg83TTNoOgQRK/7Lg+sj
 KL1+RGFxmdHRVOqG5n18L7Q4LmTD19tUFNQImrQTTrKrbH2vbMSTF2PfzdmDRwMz
 R5vW5+wsagfhSttOce/GR4p9+bM9XEclzEa3liqNVQxijOFXmkV14pn0x5anYfeB
 ABthxFFHcVn3exP/q3lmq048x1yNE71wUU5WQIWf6V/ZKf+++wQU8r7HpnATWYeO
 vtf8gZq+xyLLjhxoJF6n6olSZXI7Yhz4jV2G68/VroS312AUFWPogK+cSshWGlSw
 zGixM1q55oj9CXjZ37nR6pTzQhSZLf/uHX5beatlpeoJ4Hho6HlIABvx2oEnat7b
 o5RW64RB0gVJqlYZdKxL29HNrovr9tlWPTaIPGFRvWDpl3c1w+rMKXE+5hwu8jMJ
 2jgxd5FZCgBaDsAKojmeQR7PAo2ffAdUO0Dj/SuAaMOpuHWHcnJk9kIN2PUrC+Sf
 d/H2soT9x+60KbQmtCEo5VfEN8bvNP3+ZSnadEG/gRN2IIa5FZAUQykU+i50gAvj
 tuKAokdRGZHvXM+buYFBfN6RbhVCXzBF/fAG7r37QVR2u1zaUszmgFOUqERhTQfm
 RNnyeAs9G9rljtna/AD7cIOdKTg8oETPISxt8Y6EzNMpI8PhF0aGoxso3yD19oH1
 M+fq55RigsR48Kic40hY
 =N5BL
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - add a shell script to get Clang version

 - improve portability of build scripts

 - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code

 - rename built-in.o which is now thin archive to built-in.a

 - process clean/build targets one by one to get along with -j option

 - simplify ld-option

 - improve building with CONFIG_TRIM_UNUSED_KSYMS

 - define KBUILD_MODNAME even for objects shared among multiple modules

 - avoid linking multiple instances of same objects from composite
   objects

 - move <linux/compiler_types.h> to c_flags to include it only for C
   files

 - clean-up various Makefiles

* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
  kbuild: clean up link rule of composite modules
  kbuild: clean up archive rule of built-in.a
  kbuild: remove partial section mismatch detection for built-in.a
  net: liquidio: clean up Makefile for simpler composite object handling
  lib: zstd: clean up Makefile for simpler composite object handling
  kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
  kbuild: rename real-objs-y/m to real-obj-y/m
  kbuild: move modname and modname-multi close to modname_flags
  kbuild: simplify modname calculation
  kbuild: fix modname for composite modules
  kbuild: define KBUILD_MODNAME even if multiple modules share objects
  kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
  kbuild: Use ls(1) instead of stat(1) to obtain file size
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
  kbuild: move include/config/ksym/* to include/ksym/*
  kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
  kbuild: restore autoksyms.h touch to the top Makefile
  kbuild: move 'scripts' target below
  kbuild: remove wrong 'touch' in adjust_autoksyms.sh
  ...
2018-04-03 15:51:22 -07:00
Linus Torvalds f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Linus Torvalds e68b4bad71 Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
 "The biggest change is the forcing of asm-goto support on x86, which
  effectively increases the GCC minimum supported version to gcc-4.5 (on
  x86)"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Don't pass in -D__KERNEL__ multiple times
  x86: Remove FAST_FEATURE_TESTS
  x86: Force asm-goto
  x86/build: Drop superfluous ALIGN from the linker script
2018-04-02 14:37:03 -07:00
Linus Torvalds 0adb32858b Linux 4.16 2018-04-01 14:20:27 -07:00
Linus Torvalds b5dbc28762 Kbuild fixes for v4.16 (3rd)
- fix missed rebuild of TRIM_UNUSED_KSYMS
 
 - fix rpm-pkg for GNU tar >= 1.29
 
 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg
 
 - add -no-integrated-as option ealier to fix building with Clang
 
 - fix netfilter Makefile for parallel building
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJavwJpAAoJED2LAQed4NsGQuIQAK/UmPVczOxT7RefB4BrAsZG
 Zlai7HnfpzWk5EZE6fbTHTmbFu6HZ1TuYhOW5UlJcxd3P+nJfL5WwDo0H52LVfLT
 UkSubLCtZBl+DqtbuOg4Xrmh8k3WneGqYT7H9D19LRXTeeoh82g81+mWYL3F9UOA
 OWGzKf9+3CQhP7OjeVlfdQ8qv2UR+snyIK0jNRImTuhtys8iy2Q4EP/nQYtF7oAA
 KcYY62rS3qVKfTrdk5NY7kxvpp6/1m6141UPR75Xve7h+Emx/u0RthiMUW08e2bv
 PX5IlyI8XFz54wD2tojawMEo235cYPJAKQHZAry5tiLXvOF5vEZvoPGc8oUZnMGe
 bMNONRfXrKWi10/pcTqEfl6gEAE+bvOrqIKj/DECT4hF1av2uEeou/SzuEX+wbqK
 GxU4L5mnUwDsJNLPiUeVjyl4GD48X16lBdCs9laamRzYat5lKzJFBmgNf0dyHdI+
 l/myEtk17nSeohPWRgUeTBcP8O+E27rER7U/+KC0c4spwKrEfLFIzzNauLLJdugN
 o1VNYacseg3cLQnjSpmC26jxZw29jMFaLM5mBuiI7/F9mUlK6zaG6gyoDzV3A5lN
 jgPw48apNj4SLnUMrOi+1RYWXWkguF09f8GecjJKXvR5wGqzY7E3ZDi/zgXBf72q
 5r5dDuIExh0KXcO9Risp
 =2WPN
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix missed rebuild of TRIM_UNUSED_KSYMS

 - fix rpm-pkg for GNU tar >= 1.29

 - include scripts/dtc/include-prefixes/* to kernel header deb-pkg

 - add -no-integrated-as option ealier to fix building with Clang

 - fix netfilter Makefile for parallel building

* tag 'kbuild-fixes-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  netfilter: nf_nat_snmp_basic: add correct dependency to Makefile
  kbuild: rpm-pkg: Support GNU tar >= 1.29
  builddeb: Fix header package regarding dtc source links
  kbuild: set no-integrated-as before incl. arch Makefile
  kbuild: make scripts/adjust_autoksyms.sh robust against timestamp races
2018-03-30 18:53:57 -10:00
Linus Torvalds 3eb2ce825e Linux 4.16-rc7 2018-03-25 12:44:30 -10:00
Masahiro Yamada e9781b52d4 kbuild: add PYTHON2 and PYTHON3 variables
The variable 'PYTHON' allows users to specify a proper executable
name in case the default 'python' does not work.  However, this does
not address the case where both Python 2.x and 3.x scripts are used
in one source tree.

PEP 394 (https://www.python.org/dev/peps/pep-0394/) provides a
convention for Python scripts portability.  Here is a quotation:

  In order to tolerate differences across platforms, all new code
  that needs to invoke the Python interpreter should not specify
  'python', but rather should specify either 'python2' or 'python3'.
  This distinction should be made in shebangs, when invoking from a
  shell script, when invoking via the system() call, or when invoking
  in any other context.
  One exception to this is scripts that are deliberately written to
  be source compatible with both Python 2.x and 3.x. Such scripts may
  continue to use python on their shebang line without affecting their
  portability.

To meet this requirement, this commit adds new variables 'PYTHON2'
and 'PYTHON3'.

arch/ia64/scripts/unwcheck.py is the only script that has ever used
$(PYTHON).  Recent commit bd5edbe677 ("ia64: convert unwcheck.py to
python3") converted it to be compatible with both Python 2.x and 3.x,
so this is the exceptional case where the use of 'python' is allowed.
So, I did not touch arch/ia64/Makefile.

tools/perf/Makefile.config sets PYTHON and PYTHON2 by itself, so it
is not affected by this commit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26 02:04:01 +09:00
Masahiro Yamada 911a91c39c kconfig: rename silentoldconfig to syncconfig
As commit cedd55d49d ("kconfig: Remove silentoldconfig from help
and docs; fix kconfig/conf's help") mentioned, 'silentoldconfig' is a
historical misnomer.  That commit removed it from help and docs since
it is an internal interface.  If so, it should be allowed to rename
it to something more intuitive.  'syncconfig' is the one I came up
with because it updates the .config if necessary, then synchronize
include/generated/autoconf.h and include/config/* with it.

You should not manually invoke 'silentoldcofig'.  Display warning if
used in case existing scripts are doing wrong.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-03-26 02:04:00 +09:00
Masahiro Yamada 3fdc7d3fe4 kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.

[1] A user runs 'make'

[2] First build with empty autoksyms.h

[3] adjust_autoksyms.sh updates autoksyms.h and recurses 'make vmlinux'

  --------(begin sub-make)--------
  [4] Second build with new autoksyms.h

  [5] link-vmlinux.sh is invoked because vmlinux is missing
  ---------(end sub-make)---------

[6] link-vmlinux.sh is invoked again despite vmlinux is up-to-date.

The reason of [6] is probably because Make already decided to update
vmlinux at the time of [2] because vmlinux was missing when Make
built up the dependency graph.

Because if_changed is implemented based on $?, this issue can be
narrowed down to how Make handles $?.

You can test it with the following simple code:

[Test Makefile]
  A: B
          @echo newer prerequisite: $?
          cp B A

  B: C
          cp C B
          touch A

[Result]
  $ rm -f A B
  $ touch C
  $ make
  cp C B
  touch A
  newer prerequisite: B
  cp B A

Here, 'A' has been touched in the recipe of 'B'.  So, the dependency
'A: B' has already been met before the recipe of 'A' is executed.
However, Make does not notice the fact that the recipe of 'B' also
updates 'A' as a side-effect.

The situation is similar in this case; the vmlinux has actually been
updated in the vmlinux_prereq target.  Make cannot predict this, so
judges the vmlinux is old.

link-vmlinux.sh is costly, so it is better to not run it when unneeded.
Split CONFIG_TRIM_UNUSED_KSYMS recursion to a dedicated target.

The reason of commit 2441e78b19 ("kbuild: better abstract vmlinux
sequential prerequisites") was to cater to CONFIG_BUILD_DOCSRC, but
it was later removed by commit 1848929251 ("samples: move blackfin
gptimers-example from Documentation").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:24 +09:00
Masahiro Yamada fbfa9be990 kbuild: move include/config/ksym/* to include/ksym/*
The idea of using fixdep was inspired by Kconfig, but autoksyms
belongs to a different group.  So, I want to move those touched
files under include/config/ksym/ to include/ksym/.

The directory include/ksym/ can be removed by 'make clean' because
it is meaningless for the external module building.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:23 +09:00
Masahiro Yamada 1f50b80a09 kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
The external module building does not need to parse this code because
KBUILD_MODULES is always set anyway.

Move this code inside the "ifeq ($(KBUILD_EXTMOD),) ... endif" block.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:23 +09:00
Masahiro Yamada 07a422bb21 kbuild: restore autoksyms.h touch to the top Makefile
Commit d3fc425e81 ("kbuild: make sure autoksyms.h exists early")
moved the code that touches autoksyms.h to scripts/kconfig/Makefile
with obscure reason.

From Nicolas' comment [1], he did not seem to be sure about the root
cause.

I guess I figured it out, so here is a fix-up I think is more correct.
According to the error log in the original post [2], the build failed
in scripts/mod/devicetable-offsets.c

scripts/mod/Makefile is descended from scripts/Makefile, which is
invoked from the top-level Makefile by the 'scripts' target.

To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs).
This depends on 'prepare' and 'scripts' as follows:

  $(vmlinux-dirs): prepare scripts

Because there is no dependency between 'prepare' and 'scripts', the
parallel building can execute them simultaneously.

'prepare' depends on 'prepare1', which touched autoksyms.h, while
'scripts' descends into script/, then scripts/mod/, which needs
<generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS.  It was the
reason of the race.

I am not happy to have unrelated code in the Kconfig Makefile, so
getting it back to the top Makefile.

I removed the standalone test target because I want to use it to
create an empty autoksyms.h file.  Here is a little improvement;
unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS
is disabled.

[1] https://lkml.org/lkml/2016/11/30/734
[2] https://lkml.org/lkml/2016/11/30/531

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:22 +09:00
Masahiro Yamada d8821622c8 kbuild: move 'scripts' target below
Just a trivial change to prepare for the next commit.
This target is still invisible from external module building.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26 02:01:22 +09:00
Masahiro Yamada ce99d0bf31 kbuild: clear LDFLAGS in the top Makefile
Currently LDFLAGS is not cleared, so same flags are accumulated in
LDFLAGS when the top Makefile is recursively invoked.

I found unneeded rebuild for ARCH=arm64 when CONFIG_TRIM_UNUSED_KSYMS
is enabled.  If include/generated/autoksyms.h is updated, the top
Makefile is recursively invoked, then arch/arm64/Makefile adds one
more '-maarch64linux'.  Due to the command line change, modules are
rebuilt needlessly.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:21 +09:00
Masahiro Yamada 22340a0653 kbuild: process mixture of clean/build targets one by one
Support parallel building of clean, config, and build targets in a
single command.

For example,

  make -j<N> clean all

or

  make -j<N> mrproper defconfig all

They should be handled one by one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26 02:01:20 +09:00
Nicholas Piggin f49821ee32 kbuild: rename built-in.o to built-in.a
Incremental linking is gone, so rename built-in.o to built-in.a, which
is the usual extension for archive files.

This patch does two things, first is a simple search/replace:

git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g'

The second is to invert nesting of nested text manipulations to avoid
filtering built-in.a out from libs-y2:

-libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y)))
+libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-26 02:01:19 +09:00
Linus Torvalds c4f4d2f917 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Always validate XFRM esn replay attribute, from Florian Westphal.

 2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.

 3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
    Triebitz.

 4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
    Axtens.

 5) Fix some interrupt handling issues in e1000e driver, from Benjamin
    Poitier.

 6) Use strlcpy() in several ethtool get_strings methods, from Florian
    Fainelli.

 7) Fix rhlist dup insertion, from Paul Blakey.

 8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.

 9) Fix driver unload crash when link is up in smsc911x, from Jeremy
    Linton.

10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
    Dumazet.

11) Need to purge the write queue when TCP connections are aborted,
    otherwise userspace using MSG_ZEROCOPY can't close the fd. From
    Soheil Hassas Yeganeh.

12) Fix double free in error path of team driver, from Arkadi
    Sharshevsky.

13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.

14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
    Bianconi.

15) Properly filter out unsupported feature flags in macvlan driver,
    from Shannon Nelson.

16) Don't request loading the diag module for a protocol if the protocol
    itself is not even registered. From Xin Long.

17) If datagram connect fails in ipv6, make sure the socket state is
    consistent afterwards. From Paolo Abeni.

18) Use after free in qed driver, from Dan Carpenter.

19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
    entry. From Sabrina Dubroca.

20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.

21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.

22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.

23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.

24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.

25) Memory leak in gemini driver, from Igor Pylypiv.

26) IDR leaks in error paths of tcf_*_init() functions, from Davide
    Caratti.

27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.

28) Missing dev_put() in error path of macsec_newlink(), from Dan
    Carpenter.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
  macsec: missing dev_put() on error in macsec_newlink()
  net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
  hv_netvsc: common detach logic
  hv_netvsc: change GPAD teardown order on older versions
  hv_netvsc: use RCU to fix concurrent rx and queue changes
  hv_netvsc: disable NAPI before channel close
  net/ipv6: Handle onlink flag with multipath routes
  ppp: avoid loop in xmit recursion detection code
  ipv6: sr: fix NULL pointer dereference when setting encap source address
  ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
  net: aquantia: driver version bump
  net: aquantia: Implement pci shutdown callback
  net: aquantia: Allow live mac address changes
  net: aquantia: Add tx clean budget and valid budget handling logic
  net: aquantia: Change inefficient wait loop on fw data reads
  net: aquantia: Fix a regression with reset on old firmware
  net: aquantia: Fix hardware reset when SPI may rarely hangup
  s390/qeth: on channel error, reject further cmd requests
  s390/qeth: lock read device while queueing next buffer
  s390/qeth: when thread completes, wake up all waiters
  ...
2018-03-22 14:10:29 -07:00
Stefan Agner 0f0e8de334 kbuild: set no-integrated-as before incl. arch Makefile
In order to make sure compiler flag detection for ARM works
correctly the no-integrated-as flags need to be set before
including the arch specific Makefile.

Fixes: cfe17c9bbe ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-21 18:20:11 +09:00
Daniel Borkmann 87e0d4f0f3 kbuild: disable clang's default use of -fmerge-all-constants
Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):

  [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
  [ 4134.820925] Mem abort info:
  [ 4134.901283]   Exception class = DABT (current EL), IL = 32 bits
  [ 4135.016736]   SET = 0, FnV = 0
  [ 4135.119820]   EA = 0, S1PTW = 0
  [ 4135.201431] Data abort info:
  [ 4135.301388]   ISV = 0, ISS = 0x00000021
  [ 4135.359599]   CM = 0, WnR = 0
  [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
  [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
  [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
  [ 4135.674610] Modules linked in:
  [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S      W       4.14.19+ #1
  [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
  [ 4135.731599] PC is at bpf_prog_add+0x20/0x68
  [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
  [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
  [ 4135.769062] sp : ffffff801d4e3ce0
  [...]
  [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
  [ 4136.273746] Call trace:
  [...]
  [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
  [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
  [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
  [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
  [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
  [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88

Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.

Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:

  Pointers with different bases cannot represent the same object.
  (Note that clang defaults to -fmerge-all-constants, which can
  lead to inconsistent results for comparisons involving the address
  of a constant; this generally doesn't matter in practice.)

The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:

  Languages like C or C++ require each variable, including multiple
  instances of the same variable in recursive calls, to have distinct
  locations, so using this option results in non-conforming behavior.

There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.

Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).

  $ gcc -fverbose-asm -O2 foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
    -> foo.S doesn't list -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled

Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.

  [1] https://bugs.llvm.org/show_bug.cgi?id=18538

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-03-20 17:43:15 -07:00
Peter Zijlstra e501ce957a x86: Force asm-goto
We want to start using asm-goto to guarantee the absence of dynamic
branches (and thus speculation).

A primary prerequisite for this is of course that the compiler
supports asm-goto. This effecively lifts the minimum GCC version to
build an x86 kernel to gcc-4.5.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20180319201327.GJ4043@hirez.programming.kicks-ass.net
2018-03-20 10:58:02 +01:00
Linus Torvalds c698ca5278 Linux 4.16-rc6 2018-03-18 17:48:42 -07:00
Arnd Bergmann bb9d812643 arch: remove tile port
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.

There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.

Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.

Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-16 10:56:03 +01:00
Linus Torvalds 0c8efd610b Linux 4.16-rc5 2018-03-11 17:25:09 -07:00
Linus Torvalds 661e50bc85 Linux 4.16-rc4 2018-03-04 14:54:11 -08:00
Linus Torvalds 0eb3412a68 Kbuild fixes for v4.16
- suppress sparse warnings about unknown attributes
 
 - fix typos and stale comments
 
 - fix build error of arch/sh
 
 - fix wrong use of ld-option vs cc-ldoption
 
 - remove redundant GCC_PLUGINS_CFLAGS assignment
 
 - fix another memory leak of Kconfig
 
 - fix line number in error messages of Kconfig
 
 - do not write confusing CONFIG_DEFCONFIG_LIST out to .config
 
 - add xstrdup() to Kconfig to handle memory shortage errors
 
 - show also a Debian package name if ncurses is missing
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJamiV5AAoJED2LAQed4NsGgbUQAInk9+SPBtulpK1HayDoYrC6
 6LYQWjdO89jbKAaQFsDQ0ZC5HwPgafX18HWunJ67Cs6kunLYTMJLu8cHr5rRHrv1
 B+ceAkMe5EE62Bmju35qX54BSgcPyWt9jFloFmdzOG7nR7D+C9DUx2WZnF3Kd0Gb
 XPw8R4u2EEKGOMYh5PwYFP5mjhfWMijg6OZaAdcV4E/fSXiwSlDjwuVY1ymhsEAn
 OalDNcJ5+Foe9ADy5yLEna0Jlj8j8UMGPRzNErvL2CxZP2CSfpKfuXJABig5x8rk
 ZXULN6w7nIN/dpUkPgkTYgF6behUuSUPj+7xBDWbVjRQLMMy6bI65s5hylBzYAMy
 tB3hKnpZtrrJNc00XQWLY18b03YzLv5wW0CK8jmRJPLWDE8znb8aMqxwtfJKhfa+
 cW5v5KzQm4ercArSy983jj4FJD6ZuQf1lqAARD4vxX5kK9oy+7oJvfzmwrlh1U2c
 dk/3VKF2AjUDDdzxq+zgJIWFR1MMTxFKqL95CsdaFEUMRXr80a8XBNYP07R4l3qB
 y2zUsZZi7Ad363MkohBCEBdw1yPtHupRETr3xdQlUDh0ZQj94TXB6lX2SaY4v1NS
 J3eqTl8t/RHboS5kbPMz8MduO4otH/ZxYDd0uMKA5c/v/9LkD9y+AIpndswk4jcN
 /uKkw5sSRgO+9VfsTqed
 =sr4l
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - suppress sparse warnings about unknown attributes

 - fix typos and stale comments

 - fix build error of arch/sh

 - fix wrong use of ld-option vs cc-ldoption

 - remove redundant GCC_PLUGINS_CFLAGS assignment

 - fix another memory leak of Kconfig

 - fix line number in error messages of Kconfig

 - do not write confusing CONFIG_DEFCONFIG_LIST out to .config

 - add xstrdup() to Kconfig to handle memory shortage errors

 - show also a Debian package name if ncurses is missing

* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  MAINTAINERS: take over Kconfig maintainership
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  kconfig: add xstrdup() helper
  kbuild: disable sparse warnings about unknown attributes
  Makefile: Fix lying comment re. silentoldconfig
2018-03-03 10:37:01 -08:00
Masahiro Yamada 0da4fabdf4 kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
'--build-id' is passed to $(LD), so it should be tested by 'ld-option'.

This seems a kind of misconversion when ld-option was renamed to
cc-ldoption.

Commit f86fd30660 ("kbuild: rename ld-option to cc-ldoption") renamed
all instances of 'ld-option' to 'cc-ldoption'.

Then, commit 691ef3e7fd ("kbuild: introduce ld-option") re-added
'ld-option' as a new implementation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02 09:20:56 +09:00
Luc Van Oostenryck 6c49f359ca kbuild: disable sparse warnings about unknown attributes
Currently, sparse issues warnings on code using an attribute
it doesn't know about.

One of the problem with this is that these warnings have no
value for the developer, it's just noise for him. At best these
warnings tell something about some deficiencies of sparse itself
but not about a potential problem with code analyzed.

A second problem with this is that sparse release are, alas,
less frequent than new attributes are added to GCC.

So, avoid the noise by asking sparse to not warn about
attributes it doesn't know about.

Reference: https://marc.info/?l=linux-sparse&m=151871600016790
Reference: https://marc.info/?l=linux-sparse&m=151871725417322
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02 00:26:46 +09:00
Ulf Magnusson 61277981dd Makefile: Fix lying comment re. silentoldconfig
The comment above the silentoldconfig invocation is outdated.
'make oldconfig' updates just .config and doesn't touch the
include/config/ tree.

This came up in https://lkml.org/lkml/2018/2/12/415.

While fixing the comment, make it more informative by explaining the
purpose of the unfortunately named silentoldconfig.

I can't make sense of the comment re. auto.conf.cmd and a cleaned tree.
include/config/auto.conf and include/config/auto.conf.cmd are both
created simultaneously by silentoldconfig (in
scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems
to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part
of the comment rather than blindly copying it. It might be a leftover
from an older way of doing things.

The include/config/auto.conf.cmd prerequisite might be there to ensure
that silentoldconfig gets rerun if conf_write_autoconf() fails between
writing out auto.conf.cmd and auto.conf (a comment in the function
indicates that auto.conf is deliberately written out last to mark
completion of the operation). It seems the Makefile dependency between
include/config/auto.conf and .config would already take care of that
though, since include/config/auto.conf would still be out of date re.
.config if the operation fails.

Cop out and leave the prerequisite in for now.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-02 00:26:46 +09:00
Linus Torvalds 85a2d939c0 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "Yet another pile of melted spectrum related changes:

   - sanitize the array_index_nospec protection mechanism: Remove the
     overengineered array_index_nospec_mask_check() magic and allow
     const-qualified types as index to avoid temporary storage in a
     non-const local variable.

   - make the microcode loader more robust by properly propagating error
     codes. Provide information about new feature bits after micro code
     was updated so administrators can act upon.

   - optimizations of the entry ASM code which reduce code footprint and
     make the code simpler and faster.

   - fix the {pmd,pud}_{set,clear}_flags() implementations to work
     properly on paravirt kernels by removing the address translation
     operations.

   - revert the harmful vmexit_fill_RSB() optimization

   - use IBRS around firmware calls

   - teach objtool about retpolines and add annotations for indirect
     jumps and calls.

   - explicitly disable jumplabel patching in __init code and handle
     patching failures properly instead of silently ignoring them.

   - remove indirect paravirt calls for writing the speculation control
     MSR as these calls are obviously proving the same attack vector
     which is tried to be mitigated.

   - a few small fixes which address build issues with recent compiler
     and assembler versions"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
  KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
  objtool, retpolines: Integrate objtool with retpoline support more closely
  x86/entry/64: Simplify ENCODE_FRAME_POINTER
  extable: Make init_kernel_text() global
  jump_label: Warn on failed jump_label patching attempt
  jump_label: Explicitly disable jump labels in __init code
  x86/entry/64: Open-code switch_to_thread_stack()
  x86/entry/64: Move ASM_CLAC to interrupt_entry()
  x86/entry/64: Remove 'interrupt' macro
  x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
  x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
  x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
  x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
  objtool: Add module specific retpoline rules
  objtool: Add retpoline validation
  objtool: Use existing global variables for options
  x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
  x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
  x86/paravirt, objtool: Annotate indirect calls
  ...
2018-02-26 09:34:21 -08:00
Linus Torvalds 4a3928c6f8 Linux 4.16-rc3 2018-02-25 18:50:41 -08:00
Peter Zijlstra d5028ba8ee objtool, retpolines: Integrate objtool with retpoline support more closely
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-21 16:54:32 +01:00
Linus Torvalds 91ab883eb2 Linux 4.16-rc2 2018-02-18 17:29:42 -08:00
Linus Torvalds 7928b2cbe5 Linux 4.16-rc1 2018-02-11 15:04:29 -08:00
Linus Torvalds 9a61df9e5f Kbuild updates for v4.16 (2nd)
Makefile changes:
 - enable unused-variable warning that was wrongly disabled for clang
 
 Kconfig changes:
 - warn blank 'help' and fix existing instances
 - fix 'choice' behavior to not write out invisible symbols
 - fix misc weirdness
 
 Coccinell changes:
 - fix false positive of free after managed memory alloc detection
 - improve performance of NULL dereference detection
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJafl86AAoJED2LAQed4NsGrBEP/23mRl+8dSYkTmlczP7stZHL
 tGkMQIOj85usPV4JIxYHgge6XhU0CBFXNGnDnxGeNEtwnBr5QQNxuS2nPh7rHJIN
 zX5rX/vwO9lzn2FFEdKrk8bito1IgnUHUvN/d0ikPWzY7GaMy6WrIWgyThllsLNE
 W7hp3cpUQOhLL9PKXwglZ/oS4iTpEs0DwN93UXU7cp7zyRa0XtFfPf7/IJ2KY+Yl
 a2TEsUuZ/slJoxLhacr6+TBAgqUyewWIs0nAGdjP2EVlSjxZJQYFEQq4KnLUO2gV
 wLHH2snsZSBDfPDp0M9OOb737HE17NRmuLjWxUZZOMFz8tvfUT1454zhVAN2OtSQ
 cP0RqVRrFiS721oxacZpAxKFrd7o4ugUHpftJMPQAq70T9JFFbapfCLvd+OblOb/
 CWmDOOR37tvop5OCuaqaSMq7a+ZQt2cO5fogiEDdnjZkk2AH5GgsAHJIrl7hH4OT
 P9UMcxaWSGbutdVkM4cMUmYMuAJjiFhx1fiD+hevB1KvemXRXrqhCb0wV+GRdcoU
 MXGvOGVw5WyF/vFdjpjkY7KeCgpU3BTWH3pFC2a5vUCDqgD8yndwFghJMDfSjl6d
 46DIqknyveq234GK/Yz5khlbY094yL8JrJU2duva/9fGV86tgOr29xgMK28Lpyh8
 AYRGO9XgmehZrEHcAQ57
 =jy5l
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:
 "Makefile changes:
   - enable unused-variable warning that was wrongly disabled for clang

  Kconfig changes:
   - warn about blank 'help' and fix existing instances
   - fix 'choice' behavior to not write out invisible symbols
   - fix misc weirdness

  Coccinell changes:
   - fix false positive of free after managed memory alloc detection
   - improve performance of NULL dereference detection"

* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
  kconfig: remove const qualifier from sym_expand_string_value()
  kconfig: add xrealloc() helper
  kconfig: send error messages to stderr
  kconfig: echo stdin to stdout if either is redirected
  kconfig: remove check_stdin()
  kconfig: remove 'config*' pattern from .gitignnore
  kconfig: show '?' prompt even if no help text is available
  kconfig: do not write choice values when their dependency becomes n
  coccinelle: deref_null: avoid useless computation
  coccinelle: devm_free: reduce false positives
  kbuild: clang: disable unused variable warnings only when constant
  kconfig: Warn if help text is blank
  nios2: kconfig: Remove blank help text
  arm: vt8500: kconfig: Remove blank help text
  MIPS: kconfig: Remove blank help text
  MIPS: BCM63XX: kconfig: Remove blank help text
  lib/Kconfig.debug: Remove blank help text
  Staging: rtl8192e: kconfig: Remove blank help text
  Staging: rtl8192u: kconfig: Remove blank help text
  mmc: kconfig: Remove blank help text
  ...
2018-02-09 19:32:41 -08:00
Kees Cook 44c6dc940b Makefile: introduce CONFIG_CC_STACKPROTECTOR_AUTO
Nearly all modern compilers support a stack-protector option, and nearly
all modern distributions enable the kernel stack-protector, so enabling
this by default in kernel builds would make sense.  However, Kconfig does
not have knowledge of available compiler features, so it isn't safe to
force on, as this would unconditionally break builds for the compilers or
architectures that don't have support.  Instead, this introduces a new
option, CONFIG_CC_STACKPROTECTOR_AUTO, which attempts to discover the best
possible stack-protector available, and will allow builds to proceed even
if the compiler doesn't support any stack-protector.

This option is made the default so that kernels built with modern
compilers will be protected-by-default against stack buffer overflows,
avoiding things like the recent BlueBorne attack.  Selection of a specific
stack-protector option remains available, including disabling it.

Additionally, tiny.config is adjusted to use CC_STACKPROTECTOR_NONE, since
that's the option with the least code size (and it used to be the default,
so we have to explicitly choose it there now).

Link: http://lkml.kernel.org/r/1510076320-69931-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Kees Cook 2bc2f688fd Makefile: move stack-protector availability out of Kconfig
Various portions of the kernel, especially per-architecture pieces,
need to know if the compiler is building with the stack protector.
This was done in the arch/Kconfig with 'select', but this doesn't
allow a way to do auto-detected compiler support. In preparation for
creating an on-if-available default, move the logic for the definition of
CONFIG_CC_STACKPROTECTOR into the Makefile.

Link: http://lkml.kernel.org/r/1510076320-69931-3-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Kees Cook 2b83839275 Makefile: move stack-protector compiler breakage test earlier
In order to make stack-protector failures warn instead of unconditionally
breaking the build, this moves the compiler output sanity-check earlier,
and sets a flag for later testing.  Future patches can choose to warn or
fail, depending on the flag value.

Link: http://lkml.kernel.org/r/1510076320-69931-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:44 -08:00
Andrey Konovalov 0e410e158e kasan: don't emit builtin calls when sanitization is off
With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset).  KASAN uses some
macro tricks to use the proper version where required.  For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.

The issue is that clang emits memset() calls even when there is no
memset() in the source code.  They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.

The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.

Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06 18:32:42 -08:00
Sodagudi Prasad 0a5f417674 kbuild: clang: disable unused variable warnings only when constant
Currently, GCC disables -Wunused-const-variable, but not
-Wunused-variable, so warns unused variables if they are
non-constant.

While, Clang does not warn unused variables at all regardless of
the const qualifier because -Wno-unused-const-variable is implied
by the stronger option -Wno-unused-variable.

Disable -Wunused-const-variable instead of -Wunused-variable so that
GCC and Clang work in the same way.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-02-07 09:20:19 +09:00
Linus Torvalds 562f36ed28 Kconfig updates for v4.16
A pretty big batch of Kconfig updates. I have to mention the lexer
 and parser of Kconfig are now built from real .l and .y sources.
 So, flex and bison are the requirement for building the kernel.
 Both of them (unlike gperf) have been stable for a long time. This
 change has been tested several weeks in linux-next, and I did not
 receive any problem report about this.
 
 Summary:
 
 - Add checks for mistakes, like the choice default is not in
   choice, help is doubled
 
 - Document data structure and complex code
 
 - Fix various memory leaks
 
 - Change Makefile to build lexer and parser instead of using
   pre-generated C files
 
 - Drop 'boolean' keyword, which is equivalent to 'bool'
 
 - Use default 'yy' prefix and remove unneeded Make variables
 
 - Fix gettext() check for xconfig
 
 - Announce that oldnoconfig will be finally removed
 
 - Make 'Selected by:' and 'Implied by' readable in help and
   search result
 
 - Hide silentoldconfig from 'make help' to stop confusing people
 
 - Fix misc things and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0O7AAoJED2LAQed4NsGxRQQAKiDkBmJUKzJykEr3BhEsCW1
 1cKwsaCFSKQJZde+Edn14gqBQY3qvQVaWfnQpoBC69IOlMlVQyKqqdtjIUxmGTem
 +age94JvgPT3oj7ELigUsL5bFL8CEZYpjwAVkO+Zd+7jPxlM4glNl9F3coTp9ZAl
 kaFxnch8qPT3fb6xYSwTpkk28RFNfT8ixwImj0CH6wlwxI635o9wpqAmHCMD5Yid
 wBlEB0I0aw9xVx/D2FAh1ZJ+fyOtPLotRTtUQ1kdlDyk98V6EJRfyh1XWF0xE/gH
 WR7MAuBNXC6Uu1KqXLTJRWWE4NjBmW8e7OLTaoFQFXdnz/Rgd6gbPXuiiyKR6PUc
 mA3h6F8uPDpoRpqOrn6pdu269n1ObuZuC1XZ3MVSXtW3OzLbUk/2GpHPVX8mrep5
 SBGsfq4JYtQkgz9/wBrWpdAjl2QbtPJbM/izCbEWk7pod18dVnyHpo3i3YjsaSQf
 piDK5JGKsHEisAzp6Onhc9EPeBLAjG236+LvBruaqjJNySXyT0S2kOwV0AMOD1yC
 ave8ZQA0QxP7sV/s5DXGkFx5Nt/1LE8JWvcRN0+juavnkUklWfFfnk7epAnFfRPi
 HCGfeQSzIQxQ+JV7/vlJ95FWvLZz+KzQ49X5aoYCVcEiFf2MV7RkDHSp5mPE4DnO
 5JeHnTBpuvw4mnrZ6UNj
 =rsi/
 -----END PGP SIGNATURE-----

Merge tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:
 "A pretty big batch of Kconfig updates.

  I have to mention the lexer and parser of Kconfig are now built from
  real .l and .y sources. So, flex and bison are the requirement for
  building the kernel. Both of them (unlike gperf) have been stable for
  a long time. This change has been tested several weeks in linux-next,
  and I did not receive any problem report about this.

  Summary:

   - add checks for mistakes, like the choice default is not in choice,
     help is doubled

   - document data structure and complex code

   - fix various memory leaks

   - change Makefile to build lexer and parser instead of using
     pre-generated C files

   - drop 'boolean' keyword, which is equivalent to 'bool'

   - use default 'yy' prefix and remove unneeded Make variables

   - fix gettext() check for xconfig

   - announce that oldnoconfig will be finally removed

   - make 'Selected by:' and 'Implied by' readable in help and search
     result

   - hide silentoldconfig from 'make help' to stop confusing people

   - fix misc things and cleanups"

* tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (37 commits)
  kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help
  kconfig: make "Selected by:" and "Implied by:" readable
  kconfig: announce removal of oldnoconfig if used
  kconfig: fix make xconfig when gettext is missing
  kconfig: Clarify menu and 'if' dependency propagation
  kconfig: Document 'if' flattening logic
  kconfig: Clarify choice dependency propagation
  kconfig: Document SYMBOL_OPTIONAL logic
  kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX
  kconfig: use default 'yy' prefix for lexer and parser
  kconfig: make conf_unsaved a local variable of conf_read()
  kconfig: make xfgets() really static
  kconfig: make input_mode static
  kconfig: Warn if there is more than one help text
  kconfig: drop 'boolean' keyword
  kconfig: use bool instead of boolean for type definition attributes, again
  kconfig: Remove menu_end_entry()
  kconfig: Document important expression functions
  kconfig: Document automatic submenu creation code
  kconfig: Fix choice symbol expression leak
  ...
2018-02-01 11:45:49 -08:00
Linus Torvalds d8a5b80568 Linux 4.15 2018-01-28 13:20:33 -08:00
Linus Torvalds 0c5b9b5d9a Linux 4.15-rc9 2018-01-21 13:51:26 -08:00
Linus Torvalds a8750ddca9 Linux 4.15-rc8 2018-01-14 15:32:30 -08:00
Linus Torvalds 22079ee450 Kbuild fixes for v4.15
- fix cross-compilation for architectures that setup CROSS_COMPILE
   in their arch Makefile
 
 - fix Kconfig rational operators for bool / tristate
 
 - drop a gperf-generated file from .gitignore
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaWgIlAAoJED2LAQed4NsGniEQAKFEhwU3XErlJHhfz1o84oJT
 ycfulcz1VDUrxpfYi7/uCiBNB7B5rajnH0fclkMwt4oV7wJgWbtDTzlLNIhX5vQI
 e+zDc8GMv/9rBks8OBypsUwlW/3etP6PjL1uC2KgG8F/2gNoodJs9Y/5Jfb3esKF
 Lh8A1LMqSKNG4B9pjRBQv1k2KX6K5R011UGKLg6qcek1lj8r9NpdgKo/jH5tjrTb
 y5weRpIkofb4sqBjls+7H24DUWg2GVSunEIBBNyxqwn52UhcSNcC2s+jdKqwmS50
 R2jP8ENXyiATCJfVdKguhiTQJ4xLbTbHrL1K9vGpimj+3PAf37VbRlhXPJ6FVyCm
 vuxv6HHL9a7Pm7o/sQxWmHD6GQa6/DCD+j8LPR5ro3Imkh0zqTqvA8R3mnX3NnVz
 lj2Bu+Ii+OaSgoN7B2lLgIkr8uc99CErEcqjI2fxKm5hVbuqGF9nciiGMLc0fXJW
 9alfkdi911LR3SjmwvFngGtq0SXOTG830J2ERfoD4zCKVg5ZffrFyMPLPgdze3Uv
 BKDynomNfCxciz1h4/MZunUOjrViUFfHXDwkSnkfXAmOGfCM1XoE7/aSOuTzvTnl
 CT8Sk9RIa90AogVnkA92Zza93Itophpdqdnw8acJIDDrNaToNprzTLB4HNDcKWy9
 3k7yoa63AXBvE1k+ofJK
 =py+X
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix cross-compilation for architectures that setup CROSS_COMPILE in
   their arch Makefile

 - fix Kconfig rational operators for bool / tristate

 - drop a gperf-generated file from .gitignore

* tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  genksyms: drop *.hash.c from .gitignore
  kconfig: fix relational operators for bool and tristate symbols
  kbuild: move cc-option and cc-disable-warning after incl. arch Makefile
2018-01-13 13:24:56 -08:00
Linus Torvalds b2cd1df660 Linux 4.15-rc7 2018-01-07 14:22:41 -08:00
Linus Torvalds 30a7acd573 Linux 4.15-rc6 2017-12-31 14:47:43 -08:00
Linus Torvalds 3ce120b16c kbuild: add '-fno-stack-check' to kernel build options
It appears that hardened gentoo enables "-fstack-check" by default for
gcc.

That doesn't work _at_all_ for the kernel, because the kernel stack
doesn't act like a user stack at all: it's much smaller, and it doesn't
auto-expand on use.  So the extra "probe one page below the stack" code
generated by -fstack-check just breaks the kernel in horrible ways,
causing infinite double faults etc.

[ I have to say, that the particular code gcc generates looks very
  stupid even for user space where it works, but that's a separate
  issue.  ]

Reported-and-tested-by: Alexander Tsoy <alexander@tsoy.me>
Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: stable@kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-30 09:38:03 -08:00
Linus Torvalds 464e1d5f23 Linux 4.15-rc5 2017-12-23 20:47:16 -08:00
Linus Torvalds 1291a0d504 Linux 4.15-rc4 2017-12-17 18:59:59 -08:00
Masahiro Yamada 73a4f6dbe7 kbuild: add LEX and YACC variables
Allow users to use their favorite lexer / parser generators.
This is useful for me to test various flex and bison versions.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-16 11:12:53 +09:00
Linus Torvalds 50c4c4e268 Linux 4.15-rc3 2017-12-10 17:56:26 -08:00
Masahiro Yamada cfe17c9bbe kbuild: move cc-option and cc-disable-warning after incl. arch Makefile
Geert reported commit ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before
incl. arch Makefile") broke cross-compilation using a cross-compiler
that supports less compiler options than the host compiler.

For example,

  cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"

This problem happens on architectures that setup CROSS_COMPILE in their
arch/*/Makefile.

Move the cc-option and cc-disable-warning back to the original position,
but keep the Clang target options untouched.

Fixes: ae6b289a37 ("kbuild: Set KBUILD_CFLAGS before incl. arch Makefile")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-12-06 21:53:57 +09:00
Linus Torvalds ae64f9bd1d Linux 4.15-rc2 2017-12-03 11:01:47 -05:00
Linus Torvalds 4fbd8d194f Linux 4.15-rc1 2017-11-26 16:01:47 -08:00
Masahiro Yamada ef46d9b3dc kbuild: clean up *.i and *.lst patterns by make clean
*.i and *.lst are supported by the single target build.  Clean up them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 23:12:05 +09:00
Masahiro Yamada ebaad7d364 kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
The "rpm" has been kept for backward compatibility since pre-git era.
I am planning to remove it after the Linux 4.18 release.  Annouce the
end of the support, prompting to use "rpm-pkg" instead.

If you use "rpm", it will work like "rpm-pkg", but warning messages
will be displayed as follows:

  WARNING: "rpm" target will be removed after Linux 4.18
           Please use "rpm-pkg" instead.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 23:12:05 +09:00
Chris Fries ae6b289a37 kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
Set the clang KBUILD_CFLAGS up before including arch/ Makefiles,
so that ld-options (etc.) can work correctly.

This fixes errors with clang such as ld-options trying to CC
against your host architecture, but LD trying to link against
your target architecture.

Signed-off-by: Chris Fries <cfries@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-23 13:12:37 +09:00
Masahiro Yamada f7adc3124d kbuild: create built-in.o automatically if parent directory wants it
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory
and link built-in.o from that directory.  This means foo/Makefile is
responsible for creating built-in.o even if there is no object to
link (in this case, built-in.o is an empty archive).

We have had several fixups like commit 4b024242e8 ("kbuild: Fix
linking error built-in.o no such file or directory"), then ended up
with a complex condition as follows:

  ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
  builtin-target := $(obj)/built-in.o
  endif

We still have more cases not covered by the above, so we need to add
  obj- := dummy.o
in several places just for creating empty built-in.o.

A key point is, the parent Makefile knows whether built-in.o is needed
or not.  If a subdirectory needs to create built-in.o, its parent can
tell the fact when descending.

If non-empty $(need-builtin) flag is passed from the parent, built-in.o
should be created.  $(obj-y) should be still checked to support the
single target "%/".  All of ugly tricks will go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2017-11-18 11:38:58 +09:00
Bjørn Forsman 16f8259ca7 kbuild: /bin/pwd -> pwd
Most places use pwd and rely on $PATH lookup. Moving the remaining
absolute path /bin/pwd users over for consistency.

Also, a reason for doing /bin/pwd -> pwd instead of the other way around
is because I believe build systems should make little assumptions on
host filesystem layout. Case in point, we do this kind of patching
already in NixOS.

Ref. commit 028568d84d
("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)").

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-18 11:32:27 +09:00
Linus Torvalds 09bd7c75e5 Kbuild updates for v4.15
One of the most remarkable improvements in this cycle is, Kbuild is
 now able to cache the result of shell commands.  Some variables are
 expensive to compute, for example, $(call cc-option,...) invokes the
 compiler.  It is not efficient to redo this computation every time,
 even when we are not actually building anything.  Kbuild creates a
 hidden file ".cache.mk" that contains invoked shell commands and
 their results.  The speed-up should be noticeable.
 
 Summary:
 
 - Fix arch build issues (hexagon, sh)
 
 - Clean up various Makefiles and scripts
 
 - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
 
 - Cache variables that are expensive to compute
 
 - Improve cc-ldopton and ld-option for Clang
 
 - Optimize output directory creation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDxaLAAoJED2LAQed4NsGIHQP/isMxxaIxIAWU56+ZcII74k7
 639VgrKi9n5y25d1dBRTQg+vReHE6E2JbkCqpVOu11t7m0LT7yUK8v3WwyLf1qTN
 GxnqZ/WMQU5/AYVqIWo8jN4FGHpivHJ6qbeiNJM9qN4RAkzG0sZUq746VaFZYmIR
 Lu0Gf4m4qjifkkhXsQdWT5i7yNTidPqaL6GNb+FcFkEHlVre8jma0kJlgfHxru84
 WmETpjQXvHAZ/R61vY6ekAWpqFhw3ecJY96A9npnx+SQVQdSNAdpaU0SK29jB0ON
 /SAfpHg9oa/gD0LFOKV6zkjnAkd4TEjrJEiHHhz5gjT/SbS3T1llBIGZ1oV4X7Y0
 Vlh9KWlm1FJJI4SIzc9qUaQMp6JtLfEfHKJCc45xVaN3fNrDnR8jl80x5+95ELga
 dCkZgnq5u82MtTysCbHBESwDYQaVPyIrh7In+mduglaCqhqj9KoDjoLoiGfCg7SA
 3tPflYVd629w5l5GrazJ40jWn1+ggMtgMOVooJNJ+dINCP+GxsUpH84Ww2Pdic+/
 qLdud6TeqxrZDGzWXqKNLu8alM8NGgSr101l9gIf1oqSyy63duBpMrxGDoIJS3FU
 rFDoFFUhlfkAXNbQHtVGNzKtcpCjURh992j9Fa1+NfMwSce5IHkMwTvPmNSRowi8
 0llLjXhD/bxK6FpdvlV8
 =zIdO
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "One of the most remarkable improvements in this cycle is, Kbuild is
  now able to cache the result of shell commands. Some variables are
  expensive to compute, for example, $(call cc-option,...) invokes the
  compiler. It is not efficient to redo this computation every time,
  even when we are not actually building anything. Kbuild creates a
  hidden file ".cache.mk" that contains invoked shell commands and their
  results. The speed-up should be noticeable.

  Summary:

   - Fix arch build issues (hexagon, sh)

   - Clean up various Makefiles and scripts

   - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles

   - Cache variables that are expensive to compute

   - Improve cc-ldopton and ld-option for Clang

   - Optimize output directory creation"

* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
  sh: decompressor: add shipped files to .gitignore
  frv: .gitignore: ignore vmlinux.lds
  selinux: remove unnecessary assignment to subdir-
  kbuild: specify FORCE in Makefile.headersinst as .PHONY target
  kbuild: remove redundant mkdir from ./Kbuild
  kbuild: optimize object directory creation for incremental build
  kbuild: create object directories simpler and faster
  kbuild: filter-out PHONY targets from "targets"
  kbuild: remove redundant $(wildcard ...) for cmd_files calculation
  kbuild: create directory for make cache only when necessary
  sh: select KBUILD_DEFCONFIG depending on ARCH
  kbuild: fix linker feature test macros when cross compiling with Clang
  kbuild: shrink .cache.mk when it exceeds 1000 lines
  kbuild: do not call cc-option before KBUILD_CFLAGS initialization
  kbuild: Cache a few more calls to the compiler
  kbuild: Add a cache for generated variables
  kbuild: add forward declaration of default target to Makefile.asm-generic
  kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
  hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
  ...
2017-11-17 17:45:29 -08:00
Victor Chibotaru d677a4d601 Makefile: support flag -fsanitizer-coverage=trace-cmp
The flag enables Clang instrumentation of comparison operations
(currently not supported by GCC).  This instrumentation is needed by the
new KCOV device to collect comparison operands.

Link: http://lkml.kernel.org/r/20171011095459.70721-2-glider@google.com
Signed-off-by: Victor Chibotaru <tchibo@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-17 16:10:04 -08:00
Masahiro Yamada 7f855fc805 kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
In my view, it is not helpful to have a separate file just for
the coccicheck help message.  Merge scripts/Makefile.help into
the top-level Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
2017-11-17 00:33:09 +09:00
Masahiro Yamada 2982c95357 kbuild: remove redundant $(wildcard ...) for cmd_files calculation
I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files.  Remove the first one.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-16 09:07:34 +09:00
Linus Torvalds b293fca43b RISC-V Port for Linux 4.15 v9
This tag contains the core RISC-V Linux port, which has been through
 nine rounds of review on various mailing lists.  The port is not
 complete: there's some cleanup patches moving through the review
 process, a whole bunch of drivers that need some work, and a lot of
 feature additions that will be needed.
 
 The patches contained in this tag have been through nine rounds of
 review on the various mailing lists.  I have some outstanding cleanup
 patches, but since there's been so much review on these patches I
 thought it would be best to submit them as-is and then submit explicit
 cleanup patches so everyone can review them.  This first patch set is
 big enough that it's a bit of a pain to constantly rewrite, and it's
 caused a few headaches with various contributors.
 
 The port is definately a work in progress.  While what's there builds
 and boots with 4.14, it's a bit hard to actually see anything happen
 because there are no device drivers yet.  I maintain a staging branch
 that contains all the device drivers and cleanup that actually works,
 but those patches won't all be ready for a while.  I'd like to get what
 we currently have into your tree so everyone can start working from a
 single base -- of particular importance is allowing the glibc
 upstreaming process to proceed so we can sort out any possibly lingering
 user-visible ABI problems we might have.
 
 Copied below is the ChangeLog that contains the history of this patch
 set:
 
 (v9) As per suggestions on our v8 patch set, I've split the core architecture code
 out from our drivers and would like to submit this patch set to be included
 into linux-next, with the goal being to be merged in during the next merge
 window.  This patch set is based on 4.14-rc2, but if it's better to have it
 based on something else then I can change it around.
 
 This patch set contains just the core arch code for RISC-V, so while it builds
 an nominally boots, you can't print or take an interrupt so it's not that
 useful.  If you're looking to actually boot a system it would probably be
 better to use the full patch set listed below.
 
 We've collected a handful of tags from reviewers, and the remainder of the
 patch set only got minimal feedback last time.  Here's what changed:
 
  * We now use the device tree to initialize the timer driver so it's less
    tighly coupled with the arch port.
  * I cleaned up the defconfigs -- there's actually now just one, and it's
    empty.  For now I think we're OK with what the kernel sets as defaults, but
    I anticipate we'll begin to expand this as people start to use the port
    more.
  * The VDSO symbols version is sane.
  * We WFI while spinning in the boot loop.
  * A handful of comments have been added.
 
 While there are still a handful of FIXMEs in this patch set, we've started to
 get enough interest from various users and contributors that maintaining an out
 of tree patch set is starting to become a big burden.  Hopefully the patches
 are good enough to merge now, which will at least get everyone working in a
 more reasonable manner as we clean up the remaining issues.
 
 This patch set is also availiable on github
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9-arch
 
 as is the entire patch set necessary to get a more functional RISC-V system up
 and running, including a handful of patches that aren't ready for upstream yet.
 
   https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v9
 
 Hopefully I've managed to get everyone's feedback
 
 Here's the change highlights from the whole patch set:
 
 (v8) I know it may not be the ideal time to submit a patch set right now, as
 it's the middle of the merge window, but things have calmed down quite a bit in
 the last month so I thought it would be good to get everyone on the same page.
 There's been a handful of changes since the last patch set, but most of them
 are fairly minor:
 
 * We changed PAGE_OFFSET to allowing mapping more physical memory on 64-bit
   systems.  This is user configurable, as it triggers a different code model
   that generates slightly less efficient code.
 * The device tree binding documentation is back, I'd managed to lose it at some
   point.
 * We now pass the atomic64 test suite.  The SBI timer driver has been
 * refactored.
 
 (v7) It's been a while since my last patch set, but the changes han been fairly
 minimal:
 
  * The PCI cleanup patches have been dropped, we'll do them as a separate patch
    set later.
  * We've the Kconfig entries from CONFIG_ISA_* to CONFIG_RISCV_ISA_*, to make
    grep easier.
  * There have been a handful of memory model related tweaks in I/O land,
    particularly relating the PCI and the upcoming platform specification.
    There are significant comments in the relevant files.  This is still a WIP,
    but I think we're close to getting as good as we're going to get until we
    end up with some more specifications.
 
 (v6) As it's been only a day since the v5 patch set, the changes are pretty
 minimal:
 
  * The patch set is now based on linux-next/master, which I believe is a better
    base now that we're getting closer to upstream.
  * EARLY_PRINTK is no longer an option.  Since the SBI console is reasonable,
    there's no penalty to enabling it (and thus no benefit to disabling it).
  * The mmap syscalls were refactored a bit.
 
 (v5) Things have really started to calm down, so this is fairly similar to the
 v4 patch set.  The most interesting changes include:
 
  * We've moved back to a single patch set.
 
  * SMP support has been fixed, I was accidentally running on a non-SMP
    configuration.  There were various mistakes all over the tree as a result of
    this.
 
  * The cmpxchg syscalls have been removed, as they were deemed a bad idea.  As
    a result, RISC-V Linux systems mandate the A extension.  The corresponding
    Kconfig entry to enable builds on non-A systems has been removed.
 
  * A few more atomic fixes: mostly fence changes, but those resulted in a
    handful of additional macros that were no longer necessary.
 
  * riscv_early_sie has been removed.
 
 (v4) There have only been a few changes since the v3 patch set:
 
  * The cmpxchg64 syscall is no longer enabled on 32-bit systems.  It's not
    possible to provide this on SMP systems, and it's not necessary as glibc
    knows not to call it.
 
  * We provide a ELF_HWCAP so users can determine the ISA of the machine the
    kernel is running on.
 
  * The multi-line comments are in a better form.
 
  * There were a handful of headers that could be replaced with the asm-generic
    versions, and a few unnecessary definitions.
 
  * We no longer use printk, but instead use pr_*.
 
  * A few Kconfig and defconfig entries have been cleaned up.
 
 (v3) A highlight of the changes since the v2 patch set includes:
 
  * We've split out all our drivers into separate patch sets, which I've already
    sent out to the relevant maintainers.  I haven't included those patches in
    this patch set, but some of them are necessary to build our port.  A git
    tree that contains all our patch sets merged together lives at
    <https://github.com/riscv/riscv-linux/tree/riscv-for-submission-v3>.
 
  * The patch set is now split up differently: rather than being split per
    directory it is split per topic.  Hopefully this will make it easier to
    review the port on the mailing list.  The split is a bit rough, so you
    probably still want to look at the patch set as a whole.
 
  * atomic.h has been completely rewritten and is hopefully now correct.  I've
    attempted to sanitize the various other memory model related code as well,
    and I think it should all be sane now aside from a handful of FIXMEs
    commented in the code.
 
  * We've changed the cmpexchg syscall to always exist and to not be
    multiplexed.  There is also a VDSO entry for compare and exchange, which
    allows kernels with the A extension to execute user code without the A
    extension reasonably fast.
 
  * Our user-visible register state now contains enough space for the Q
    extension for 128-bit floating point, as well as a few words to allow
    extensibility to future ISA extensions like the eventual V extension for
    vectors.
 
  * A handful of driver cleanups, but these have been split into separate patch
    sets now so I won't duplicate them here.
 
 (v2) A highlight of the changes since the v1 patch set includes:
 
   * We've split out our drivers into the right places, which means now there's
     a lot more patches.  I'll be submitting these patches to various subsystem
     maintainers and including them in any future RISC-V patch sets until
     they've been merged.
 
   * The SBI console driver has been completely rewritten to use the HVC helpers
     and is now significantly smaller.
 
   * We've begun to use weaker barriers as opposed to just the big "fence".
     There's still some work to do here, specifically:
     - We need fences in the relaxed MMIO functions.
     - The non-relaxed MMIO functions are missing R/W bits on their fences.
     - Many AMOs need the aq and rl bits set.
 
   * We now have thread_info in task_struct.  As a result, sscratch now contains
     TP instead of SP.  This was necessary because thread_info is no longer on
     the stack.
 
   * A few shared routines have been added that we use instead of creating
     another arch copy.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAloLD8sTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQbCZEAC2IgWFOAhYDIv4s39jC/iuGcofuuwC
 atTVgKSM8tUES5wBomoVxRH1yjDvmyb2jeq3gsp6gWPcchUpLMdfwf2MwW3NV3Mw
 ESCZPwYiuFhORh1Jt5RSespjK+V9qMvCW0iU6cPE/9kAlPfMGGDv2vEttOFgOGEm
 yVb1i0gHBcdzbw5H0xszBionUAQVXOFqkfO8AW8VPtFMdzZB6t9OBXRgHJLdWgmK
 2Zr5pFN75uivNh4RI1KXHpUeD1kLRVICzG7Ak/aQCfKxWsJutFI1dnLFZmFOIoTf
 2wgW4KsDsZakcA9rILtfo3SFH+mSD5PWzvv5G44yf9sEkGG9bSgxl29GeJYL7NzG
 3Da9FVMvzjIhmxamPGHfFOFTxTud9+6GU6Lj0iBLpHzpcttjhNgE2NXzcY8r1uMD
 BcSwkK3duybjeiZLpwnxOywZidCQDv6pZYyc50WBtV/oUG1fncj8DT2ZTIqGv1V8
 L6D/MXSr1jt9oJeWzfDCxHlaGaHL6grrmyJ8L1tQKPjMp+DbBPFbMLfvbn/dlsat
 mPqmfQZ4zydOVO53k6KiHozGQh6K+cuXMvNxrb9pCRy3etFV2wfTNxtbdeJSa7gj
 xarC6vSia8KFVyXp5nydSks5woHGJFQ1kQYSLEORUWiL5zWILbtI6POzOZeYHgej
 BvTzVq0AVIbxjA==
 =xDIk
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux

Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V
2017-11-15 10:49:15 -08:00
Linus Torvalds 37cb8e1f8e DeviceTree for 4.15:
- kbuild cleanups and improvements for dtbs
 
 - Code clean-up of overlay code and fixing for some long standing memory
   leak and race condition in applying overlays
 
 - Improvements to DT memory usage making sysfs/kobjects optional and
   skipping unflattening of disabled nodes. This is part of kernel
   tinification efforts.
 
 - Final piece of removing storing the full path for every DT node. The
   prerequisite conversion of printk's to use device_node format
   specifier happened in 4.14.
 
 - Sync with current upstream dtc. This brings additional checks to dtb
   compiling.
 
 - Binding doc tree wide removal of leading 0s from examples
 
 - RTC binding documentation adding missing devices and some
   consolidation of duplicated bindings
 
 - Vendor prefix documentation for nutsboard, Silicon Storage Technology,
   shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH,
   Opal Kelly, and Next Thing
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJaCwaSEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcNzeA/8
 C8uQhSsX2+UQZvFzcEA8KQAMGT3kYdrcf+gidRKwCEUWg1qscUEpTb3n3Rm5NUbU
 RPD1s6GSlh6fJCMHDTQ6Tti/T59L7nZa2/AIGmUishGu4x4q1o18AobpFJmYP/EM
 SJPwnmm5RV9WcZFao1y+sY3Xtn8DStxHO4cS+dyF5/EvPN9D8nbLJfu7bgTBAZww
 HktIMB9kx+GTipRQZBvBwXoy5MJjthIZub4XwzesA4tGananj4cXlc0xaVxpdYy3
 5bO6q5F7cbrZ2uyrF+oIChpCENK4VaXh80m0WHc8EzaG++shzEkR4he1vYkwnV+I
 OYo4vsUg9dP8rBksUG1eYhS8fJKPvEBRNP7ETT5utVBy5I/tDEbo/crmQZRTIDIC
 hZbhcdZlISZj0DzkMK2ZHQV9UYtRWzXrJbZHFIPP12GCyvXVxYJUIWb9iYnUYSon
 KugygsFSpZHMWmfAhemw5/ctJZ19qhM5UIl2KZk5tMBHAf466ILmZjg0me6fYkOp
 eADfwHJ1dLMdK79CVMHSfp+vArcZXp35B16c3sWpJB36Il97Mc/9siEufCL4GKX7
 IBBnQBlbpSBKBejWVyI7Ip/Xp5u4qAQD+ZMJ9oLqBRqfWerHbDuOERlEOgwGqJYr
 9v4HvP7V8eVUvAdqXka4EBfCyAgUzXDAxG2Dfmv9vGU=
 =jgpN
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A bigger diffstat than usual with the kbuild changes and a tree wide
  fix in the binding documentation.

  Summary:

   - kbuild cleanups and improvements for dtbs

   - Code clean-up of overlay code and fixing for some long standing
     memory leak and race condition in applying overlays

   - Improvements to DT memory usage making sysfs/kobjects optional and
     skipping unflattening of disabled nodes. This is part of kernel
     tinification efforts.

   - Final piece of removing storing the full path for every DT node.
     The prerequisite conversion of printk's to use device_node format
     specifier happened in 4.14.

   - Sync with current upstream dtc. This brings additional checks to
     dtb compiling.

   - Binding doc tree wide removal of leading 0s from examples

   - RTC binding documentation adding missing devices and some
     consolidation of duplicated bindings

   - Vendor prefix documentation for nutsboard, Silicon Storage
     Technology, shimafuji, Tecon Microprocessor Technologies, DH
     electronics GmbH, Opal Kelly, and Next Thing"

* tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
  dt-bindings: usb: add #phy-cells to usb-nop-xceiv
  dt-bindings: Remove leading zeros from bindings notation
  kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib
  MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
  kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
  .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
  .gitignore: sort normal pattern rules alphabetically
  dt-bindings: add vendor prefix for Next Thing Co.
  scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9
  of: dynamic: fix memory leak related to properties of __of_node_dup
  of: overlay: make pr_err() string unique
  of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove
  of: overlay: remove unneeded check for NULL kbasename()
  of: overlay: remove a dependency on device node full_name
  of: overlay: simplify applying symbols from an overlay
  of: overlay: avoid race condition between applying multiple overlays
  of: overlay: loosen overly strict phandle clash check
  of: overlay: expand check of whether overlay changeset can be removed
  of: overlay: detect cases where device tree may become corrupt
  of: overlay: minor restructuring
  ...
2017-11-14 18:25:40 -08:00
Linus Torvalds d6ec9d9a4d Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
 "Note that in this cycle most of the x86 topics interacted at a level
  that caused them to be merged into tip:x86/asm - but this should be a
  temporary phenomenon, hopefully we'll back to the usual patterns in
  the next merge window.

  The main changes in this cycle were:

  Hardware enablement:

   - Add support for the Intel UMIP (User Mode Instruction Prevention)
     CPU feature. This is a security feature that disables certain
     instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)

     [ Note that this is disabled by default for now, there are some
       smaller enhancements in the pipeline that I'll follow up with in
       the next 1-2 days, which allows this to be enabled by default.]

   - Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
     feature, on top of SME (Secure Memory Encryption) support that was
     added in v4.14. (Tom Lendacky, Brijesh Singh)

   - Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
     VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)

  Other changes:

   - A big series of entry code simplifications and enhancements (Andy
     Lutomirski)

   - Make the ORC unwinder default on x86 and various objtool
     enhancements. (Josh Poimboeuf)

   - 5-level paging enhancements (Kirill A. Shutemov)

   - Micro-optimize the entry code a bit (Borislav Petkov)

   - Improve the handling of interdependent CPU features in the early
     FPU init code (Andi Kleen)

   - Build system enhancements (Changbin Du, Masahiro Yamada)

   - ... plus misc enhancements, fixes and cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
  x86/build: Make the boot image generation less verbose
  selftests/x86: Add tests for the STR and SLDT instructions
  selftests/x86: Add tests for User-Mode Instruction Prevention
  x86/traps: Fix up general protection faults caused by UMIP
  x86/umip: Enable User-Mode Instruction Prevention at runtime
  x86/umip: Force a page fault when unable to copy emulated result to user
  x86/umip: Add emulation code for UMIP instructions
  x86/cpufeature: Add User-Mode Instruction Prevention definitions
  x86/insn-eval: Add support to resolve 16-bit address encodings
  x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
  x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
  x86/insn-eval: Add support to resolve 32-bit address encodings
  x86/insn-eval: Compute linear address in several utility functions
  resource: Fix resource_size.cocci warnings
  X86/KVM: Clear encryption attribute when SEV is active
  X86/KVM: Decrypt shared per-cpu variables when SEV is active
  percpu: Introduce DEFINE_PER_CPU_DECRYPTED
  x86: Add support for changing memory encryption attribute in early boot
  x86/io: Unroll string I/O when SEV is active
  x86/boot: Add early boot support when running with SEV active
  ...
2017-11-13 14:13:48 -08:00
Linus Torvalds 7832681b36 A relatively calm cycle for the docs tree again.
- The old driver statement has been added to the kernel docs.
 
   - We have a couple of new helper scripts.  find-unused-docs.sh from Sayli
     Karnic will point out kerneldoc comments that are not actually used in
     the documentation.  Jani Nikula's documentation-file-ref-check finds
     references to non-existing files.
 
   - A new ftrace document from Steve Rostedt.
 
   - Vinod Koul converted the dmaengine docs to RST
 
 Beyond that, it's mostly simple fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaCK37AAoJEI3ONVYwIuV63nwQALeqzVwGqqTwiyRyMqgEwMQM
 je/6IurEwTHtyfwtW/mztCfNid1CLTiYZg7RET3/zlHjcUI/9VlV2dbBksGFgoQo
 muHGqhwTJjXYREwjK3FkzrGckRsVZKJgdzmZYgukCCY6Ir7IffwJKYaLOCZN1S/l
 4nBHQpt2nITo0WhdmZjaNRKOQxMA8nN5yGpOIl0neGE6ywIUMgauCCCHhxnOPVWg
 ant1HliS8WR8Tizqt9wQgLCvs5lvklsBFibZPO9LBTPG2Zy3HIO9kb+npUAh2MTl
 j0Wg39zzOFvVVErqErqUIwIuQ9IrfltHrEHYYoruTvDBXBiMKIcwApF+DS+H3WSp
 TnDu3Qif4llM5SZsZGvcjawXNnbck+7SYOe9cyqpylV3SWMWrEX1tbUv6zVuVk+7
 fencYBvEZgkJmWbjDeO/Z4S50STxRTzIxFwZgLft7g/RiHo9HvlubjjwQTqBFjxA
 fVkolN7h69MGkrD8TF19eapyujqSXaNYH0pFYo87JNOjLgYmezUHyvHd8YeZJL31
 Ll0h10HqSNVzJsjFolBMgrC3CcVjsEXdBufu0yVk45sAg9ZiMYOCpwa6Rtp+tfxa
 uIBf1LKzfWSa0ocKx7+sMJt0B/CXwU3AMtsbYGyDhFhR2r3cp1NWBHf5nisz9etD
 2Md9RDFAMLELZurewB9Q
 =H6ud
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.15' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A relatively calm cycle for the docs tree again.

  - The old driver statement has been added to the kernel docs.

  - We have a couple of new helper scripts. find-unused-docs.sh from
    Sayli Karnic will point out kerneldoc comments that are not actually
    used in the documentation. Jani Nikula's
    documentation-file-ref-check finds references to non-existing files.

  - A new ftrace document from Steve Rostedt.

  - Vinod Koul converted the dmaengine docs to RST

  Beyond that, it's mostly simple fixes.

  This set reaches outside of Documentation/ a bit more than most. In
  all cases, the changes are to comment docs, mostly from Randy, in
  places where there didn't seem to be anybody better to take them"

* tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits)
  documentation: fb: update list of available compiled-in fonts
  MAINTAINERS: update DMAengine documentation location
  dmaengine: doc: ReSTize pxa_dma doc
  dmaengine: doc: ReSTize dmatest doc
  dmaengine: doc: ReSTize client API doc
  dmaengine: doc: ReSTize provider doc
  dmaengine: doc: Add ReST style dmaengine document
  ftrace/docs: Add documentation on how to use ftrace from within the kernel
  bug-hunting.rst: Fix an example and a typo in a Sphinx tag
  scripts: Add a script to find unused documentation
  samples: Convert timers to use timer_setup()
  documentation: kernel-api: add more info on bitmap functions
  Documentation: fix selftests related file refs
  Documentation: fix ref to power basic-pm-debugging
  Documentation: fix ref to trace stm content
  Documentation: fix ref to coccinelle content
  Documentation: fix ref to workqueue content
  Documentation: fix ref to sphinx/kerneldoc.py
  Documentation: fix locking rt-mutex doc refs
  docs: dev-tools: correct Coccinelle version number
  ...
2017-11-13 08:25:06 -08:00
Masahiro Yamada 433dc2ebe7 kbuild: do not call cc-option before KBUILD_CFLAGS initialization
Some $(call cc-option,...) are invoked very early, even before
KBUILD_CFLAGS, etc. are initialized.

The returned string from $(call cc-option,...) depends on
KBUILD_CPPFLAGS, KBUILD_CFLAGS, and GCC_PLUGINS_CFLAGS.

Since they are exported, they are not empty when the top Makefile
is recursively invoked.

The recursion occurs in several places.  For example, the top
Makefile invokes itself for silentoldconfig.  "make tinyconfig",
"make rpm-pkg" are the cases, too.

In those cases, the second call of cc-option from the same line
runs a different shell command due to non-pristine KBUILD_CFLAGS.

To get the same result all the time, KBUILD_* and GCC_PLUGINS_CFLAGS
must be initialized before any call of cc-option.  This avoids
garbage data in the .cache.mk file.

Move all calls of cc-option below the config targets because target
compiler flags are unnecessary for Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-11-13 22:54:24 +09:00
Douglas Anderson 4e56207130 kbuild: Cache a few more calls to the compiler
These are a few stragglers that I left out of the original patch to
cache calls to the C compiler ("kbuild: Add a cache for generated
variables") because they bleed out into the main Makefile and thus
uglify things a little bit.  The idea is the same here, though.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13 22:54:23 +09:00
Douglas Anderson 3298b690b2 kbuild: Add a cache for generated variables
While timing a "no-op" build of the kernel (incrementally building the
kernel even though nothing changed) in the Chrome OS build system I
found that it was much slower than I expected.

Digging into things a bit, I found that quite a bit of the time was
spent invoking the C compiler even though we weren't actually building
anything.  Currently in the Chrome OS build system the C compiler is
called through a number of wrappers (one of which is written in
python!) and can take upwards of 100 ms to invoke even if we're not
doing anything difficult, so these invocations of the compiler were
taking a lot of time.  Worse the invocations couldn't seem to take
advantage of the multiple cores on my system.

Certainly it seems like we could make the compiler invocations in the
Chrome OS build system faster, but only to a point.  Inherently
invoking a program as big as a C compiler is a fairly heavy
operation.  Thus even if we can speed the compiler calls it made sense
to track down what was happening.

It turned out that all the compiler invocations were coming from
usages like this in the kernel's Makefile:

KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)

Due to the way cc-option and similar statements work the above
contains an implicit call to the C compiler.  ...and due to the fact
that we're storing the result in KBUILD_CFLAGS, a simply expanded
variable, the call will happen every time the Makefile is parsed, even
if there are no users of KBUILD_CFLAGS.

Rather than redoing this computation every time, it makes a lot of
sense to cache the result of all of the Makefile's compiler calls just
like we do when we compile a ".c" file to a ".o" file.  Conceptually
this is quite a simple idea.  ...and since the calls to invoke the
compiler and similar tools are centrally located in the Kbuild.include
file this doesn't even need to be super invasive.

Implementing the cache in a simple-to-use and efficient way is not
quite as simple as it first sounds, though.  To get maximum speed we
really want the cache in a format that make can natively understand
and make doesn't really have an ability to load/parse files. ...but
make _can_ import other Makefiles, so the solution is to store the
cache in Makefile format.  This requires coming up with a valid/unique
Makefile variable name for each value to be cached, but that's
solvable with some cleverness.

After this change, we'll automatically create a ".cache.mk" file that
will contain our cached variables.  We'll load this on each invocation
of make and will avoid recomputing anything that's already in our
cache.  The cache is stored in a format that it shouldn't need any
invalidation since anything that might change should affect the "key"
and any old cached value won't be used.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-13 22:54:23 +09:00
Linus Torvalds bebc6082da Linux 4.14 2017-11-12 10:46:13 -08:00
Masahiro Yamada 74ce1896c6 kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile
We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.

Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08 11:20:24 -06:00
Ingo Molnar b3d9a13681 Merge branch 'linus' into x86/asm, to pick up fixes and resolve conflicts
Conflicts:
	arch/x86/kernel/cpu/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:53:06 +01:00
Linus Torvalds 39dae59d66 Linux 4.14-rc8 2017-11-05 13:05:14 -08:00
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ingo Molnar 3357b0d3c7 Merge branch 'x86/mpx/prep' into x86/asm
Pick up some of the MPX commits that modify the syscall entry code,
to have a common base and to reduce conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-02 10:57:24 +01:00
Linus Torvalds 0b07194bb5 Linux 4.14-rc7 2017-10-29 13:58:38 -07:00
Linus Torvalds 25a5d23b47 Kbuild fixes for v4.14 (2nd)
- fix O= building on dash
 
 - remove unused dependency in Makefile
 
 - fix default of a choice in Kconfig
 
 - fix typos and documentation style
 
 - fix command options unrecognized by sparse
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZ9KBpAAoJED2LAQed4NsG85AP/RNrH/uyiLsBWfmicpTOt6Vx
 tHik2cn3TN5TBKcLcdh214zSBCPiJSp/dIvjOmIEssOqxJS001O+jlrnbB938hCn
 xVNs3aeBOx1StNB6DOplRtVe/pEIhSMMsXbIilz5a0kAn1mud73FqWmdXSRVA8zT
 JjI9gCl4pQTkv32Pz9w5HRWI8fweMnvbHfMUJhCaYcIIyN/hqfEzupPAeww4sKkg
 P5z60iif1OMlGgB9ZdWI+giblgLJOV+KoaUh181YEICenpsaf6rpdroP3X879N7i
 Y/le65xLVtc3rUZXoggNcGj04nZ7seSBHDbmicgWu0Fbj8+4nQ9mplVr1g1fLCVc
 Ml3joe24XO0PwXOrOTxCHQHRjqWSRv6cn8X9qIQqSLHkJgryxhZ5DiCGqQRxExLN
 gbKQ82UZSc4jNsOhcfcZ3ls7Ve5ao7rSUueL97acdDRhm+t0OWLmF9cQrX+eBzpj
 NOMaPvym+ucPNSRrhEgwFxDjB8dzVfO8tuYTuwX8HxQc7v5SUWuwsnurAXc3fKF2
 2D+VsU8EHk9IKDmQMIlvlj6R4bSr0bjecedA6czcRLMr83h1fCxvQxBw4UIQIzY0
 4y6QIUX7paMAo/OOqqOm10mBJM6Sr+y2JiGvL4gFhiGbCi3+xvOa7P4hRgPCe2Lq
 +FGPIdh+skAypoc/1VfA
 =0Rbk
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix O= building on dash

 - remove unused dependency in Makefile

 - fix default of a choice in Kconfig

 - fix typos and documentation style

 - fix command options unrecognized by sparse

* tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: clang: fix build failures with sparse check
  kbuild doc: a bundle of fixes on makefiles.txt
  Makefile: kselftest: fix grammar typo
  kbuild: Fix optimization level choice default
  kbuild: drop unused symverfile in Makefile.modpost
  kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
2017-10-28 11:01:57 -07:00
Nick Desaulniers df16aaac26 kbuild: clang: remove crufty HOSTCFLAGS
When compiling with `make CC=clang HOSTCC=clang`, I was seeing warnings
that clang did not recognize -fno-delete-null-pointer-checks for HOSTCC
targets.  These were added in commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang").

Clang does not support -fno-delete-null-pointer-checks, so adding it to
HOSTCFLAGS if HOSTCC is clang does not make sense.

It's not clear why the other warnings were disabled, and just for
HOSTCFLAGS, but I can remove them, add -Werror to HOSTCFLAGS and compile
with clang just fine.

Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-26 23:58:45 +09:00
David Lin bb3f38c3c5 kbuild: clang: fix build failures with sparse check
We should avoid using the space character when passing arguments to
clang, because static code analysis check tool such as sparse may
misinterpret the arguments followed by spaces as build targets hence
cause the build to fail.

Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-24 10:12:02 +09:00
Ingo Molnar f95b23a112 Merge branch 'x86/urgent' into x86/asm, to pick up dependent fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 13:30:47 +02:00
Linus Torvalds bb176f6709 Linux 4.14-rc6 2017-10-23 06:49:47 -04:00
Linus Torvalds 33d930e59a Linux 4.14-rc5 2017-10-15 21:01:12 -04:00
Linus Torvalds a515d05e96 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
 "A single objtool fix: avoid silently broken ORC debuginfo builds and
  error out instead"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
2017-10-14 15:09:08 -04:00
Josh Poimboeuf 11af847446 x86/unwind: Rename unwinder config options to 'CONFIG_UNWINDER_*'
Rename the unwinder config options from:

  CONFIG_ORC_UNWINDER
  CONFIG_FRAME_POINTER_UNWINDER
  CONFIG_GUESS_UNWINDER

to:

  CONFIG_UNWINDER_ORC
  CONFIG_UNWINDER_FRAME_POINTER
  CONFIG_UNWINDER_GUESS

... in order to give them a more logical config namespace.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-14 10:12:12 +02:00
Jani Nikula e8939222dc Documentation: add script and build target to check for broken file references
Add a simple script and build target to do a treewide grep for
references to files under Documentation, and report the non-existing
file in stderr. It tries to take into account punctuation not part of
the filename, and wildcards, but there are bound to be false positives
too. Mostly seems accurate though.

We've moved files around enough to make having this worthwhile.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:07:42 -06:00
Shuah Khan 8d73c512e6 Makefile: enable dochelp run from main make level
Change to enable dochelp run from main make level to make it easier to
use it.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-12 11:02:11 -06:00
Masahiro Yamada 2c1f4f1251 kbuild: re-order the code to not parse unnecessary variables
The top Makefile is divided into some sections such as mixed targets,
config targets, build targets, etc.

When we build mixed targets, Kbuild just invokes submake to process
them one by one.  In this case, compiler-related variables like CC,
KBUILD_CFLAGS, etc. are unneeded.

Check what kind of targets we are building first, and parse variables
for building only when necessary.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-10 10:01:29 +09:00
Masahiro Yamada ba634eceb5 kbuild: move "_all" target out of $(KBUILD_SRC) conditional
The first "_all" occurrence around line 120 is only visible when
KBUILD_SRC is unset.

If O=... is specified, the working directory is relocated, then the
only second occurrence around line 193 is visible, that is not set
to PHONY.

Move the first one to an always visible place.  This clarifies "_all"
is our default target and it is always set to PHONY.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-10-10 10:00:47 +09:00
Masahiro Yamada 9d022c5406 kbuild: replace $(hdr-arch) with $(SRCARCH)
Since commit 5e53879008 ("sparc,sparc64: unify Makefile"), hdr-arch
and SRCARCH always match.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-10-10 10:00:47 +09:00
Masahiro Yamada 278ae60403 kbuild: link-vmlinux.sh: simplify .version increment
Since commit 1f2bfbd00e ("kbuild: link of vmlinux moved to a
script"), it is easy to increment .version without using a temporary
file .old_version.

I do not see anybody who creates the .tmp_version.  Probably it is a
left-over of commit 4e25d8bb95 ("[PATCH] kbuild: adjust .version
updating").  Just remove it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-09 23:28:46 +09:00
Linus Torvalds 8a5776a5f4 Linux 4.14-rc4 2017-10-08 20:53:29 -07:00
Randy Dunlap bbfe63b60a Makefile: kselftest: fix grammar typo
Correct typo in kselftest help text.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-10-07 20:09:34 +09:00
Masahiro Yamada 028568d84d kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
I thought commit 8e9b466799 ("kbuild: use $(abspath ...) instead of
$(shell cd ... && /bin/pwd)") was a safe conversion, but it changed
the behavior.

$(abspath ...) / $(realpath ...) does not expand shell special
characters, such as '~'.

Here is a simple Makefile example:

  ---------------->8----------------
  $(info /bin/pwd: $(shell cd ~/; /bin/pwd))
  $(info abspath: $(abspath ~/))
  $(info realpath: $(realpath ~/))
  all:
          @:
  ---------------->8----------------

  $ make
  /bin/pwd: /home/masahiro
  abspath: /home/masahiro/workspace/~
  realpath:

This can be a real problem if 'make O=~/foo' is invoked from another
Makefile or primitive shell like dash.

This commit partially reverts 8e9b466799.

Fixes: 8e9b466799 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Julien Grall <julien.grall@arm.com>
2017-10-07 20:08:02 +09:00
Josh Poimboeuf 3dd40cb320 objtool: Upgrade libelf-devel warning to error for CONFIG_ORC_UNWINDER
With CONFIG_ORC_UNWINDER, if the user doesn't have libelf-devel
installed, and they don't see the make warning, their ORC unwinder will
be silently broken.  Upgrade the warning to an error.

Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d9dfc39fb8240998820f9efb233d283a1ee96084.1507079417.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-04 08:02:18 +02:00
Linus Torvalds 9e66317d3c Linux 4.14-rc3 2017-10-01 14:54:54 -07:00
Linus Torvalds 225d3b6748 linux-kselftest-4.14-rc3-fixes
This update consists of:
 
 - fixes to several existing tests
 - a test for regression introduced by
   b9470c2760 ("inet: kill smallest_size and smallest_port")
 - seccomp support for glibc 2.26 siginfo_t.h
 - fixes to kselftest framework and tests to run make O=dir use-case
 - fixes to silence unnecessary test output to de-clutter test results
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZy7S7AAoJEAsCRMQNDUMcAt0P/iuR279yaBF3RVqHTyXsmr/t
 RO6k4uj4XLYKTrVnV/YTu5hLCGO9fPDhprMmrTqlAGclioEyMDtRTOWDDln4TNFh
 gehbXiOTVVHlLPCOXXRwvU+RsMppgi4O2WRTBK0dnTkBdl+sTLOl4iywGyqFPB11
 O3oj1nNc8ruaxYoUMYwxiGCm1OATrngoSu/Y4mMhZPgT9MnCtZWDlg//kkrxQDHO
 UTD11zk17nBAOw2q4nw3I4un00tgN8RzIOfg9g47Az40LjWSG5c5oAgd/hArqeBv
 7pCUR1PnNKTf0RujX0nfaoQQ+bOEXqpV9GmM67HLo8Q/5e4lYxWdmSdhItPS5qtS
 ZLo1lEMOuRH7+FCQuD236llhwKVMm/+R3jnXgdJcc+SupdGCmpzZ9P8rscX1g11R
 ZDZ9+k8XOA2p7ufxSIGFEILSovn0FUMneOd3Nhwk40R7cIvSiZh+V+Xzdb6Q1K9T
 NBVtH8qvRi5TyHSNwQCDF45fC6bCM80JxGcPToOguFsQTcUL6B0pG6xhxZG73+Ut
 br+Z5y+g+JLWLeGzaBjo4LnqFpeP6w4Jb8CCrqu8BussV3BToIFCJkGX6aOggow/
 D3g03tGDeMjqFMYwn0ZCH5s5u9cicWUUC8CBvoCJp2UZaE/prsNNfRjZjfwYlrVj
 TvWPdPJtwjA/sdq/n2Hl
 =FUuY
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests

   - a test for regression introduced by b9470c2760 ("inet: kill
     smallest_size and smallest_port")

   - seccomp support for glibc 2.26 siginfo_t.h

   - fixes to kselftest framework and tests to run make O=dir use-case

   - fixes to silence unnecessary test output to de-clutter test results"

* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
  selftests: timers: set-timer-lat: fix hang when std out/err are redirected
  selftests/memfd: correct run_tests.sh permission
  selftests/seccomp: Support glibc 2.26 siginfo_t.h
  selftests: futex: Makefile: fix for loops in targets to run silently
  selftests: Makefile: fix for loops in targets to run silently
  selftests: mqueue: Use full path to run tests from Makefile
  selftests: futex: copy sub-dir test scripts for make O=dir run
  selftests: lib.mk: copy test scripts and test files for make O=dir run
  selftests: sync: kselftest and kselftest-clean fail for make O=dir case
  selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
  selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
  selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
  selftests: lib.mk: fix test executable status check to use full path
  selftests: Makefile: clear LDFLAGS for make O=dir use-case
  selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
  Makefile: kselftest and kselftest-clean fail for make O=dir case
  selftests/net: msg_zerocopy enable build with older kernel headers
  selftests: actually run the various net selftests
  selftest: add a reuseaddr test
  ...
2017-09-27 10:51:08 -07:00
Palmer Dabbelt fbe934d69e RISC-V: Build Infrastructure
This patch contains all the build infrastructure that actually enables
the RISC-V port.  This includes Makefiles, linker scripts, and Kconfig
files.  It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.

Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2017-09-26 15:26:49 -07:00
Linus Torvalds e19b205be4 Linux 4.14-rc2 2017-09-24 16:38:56 -07:00
Shuah Khan 2bc84526d1 Makefile: kselftest and kselftest-clean fail for make O=dir case
kselftest and kselftest-clean targets fail when object directory is
specified to relocate objects. Fix it so it can find the source tree
to build from.

make O=/tmp/kselftest_top kselftest

make[1]: Entering directory '/tmp/kselftest_top'
make[2]: Entering directory '/tmp/kselftest_top'
make[2]: *** tools/testing/selftests: No such file or directory.  Stop.
make[2]: Leaving directory '/tmp/kselftest_top'
./linux-kselftest/Makefile:1185: recipe for target
'kselftest' failed
make[1]: *** [kselftest] Error 2
make[1]: Leaving directory '/tmp/kselftest_top'
Makefile:145: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-09-21 07:55:22 -06:00
Linus Torvalds 2bd6bf03f4 Linux 4.14-rc1 2017-09-16 15:47:51 -07:00
Markus Trippelsdorf df85b2d767 firmware: Restore support for built-in firmware
Commit 5620a0d1aa ("firmware: delete in-kernel firmware") removed the
entire firmware directory.  Unfortunately it thereby also removed the
support for built-in firmware.

This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum.  The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.

Fixes: 5620a0d1aa ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-16 10:58:48 -07:00
Linus Torvalds b38923a068 Firmware removal patch for 4.14-rc1
Many many years ago (at the kernel summit in Boston), we all came to the
 agreement that the firmware/ tree should be dropped from the kernel, and
 everyone use the linux-firmware package instead.  For some minor reason,
 David Woodhouse didn't send the pull request at that point in time, and
 everyone forgot about this.
 
 The topic came up in the hallway track at the Plumbers conference this
 week, so here's a single patch that drops the whole firmware tree.  The
 last firmware update was back in 2013, and all distros have been using
 linux-firmware instead since at least that year, if not before.  The
 only commits to that directory since 2013 was some kbuild fixups for
 various build tool issues.
 
 So lets finally drop this, we don't need to lug them around in the
 kernel source tree anymore, especially as no one wants or uses them.
 
 This has passed build testing with 0-day, I don't think it made it into
 linux-next this week, but I figured it was good to get in before
 4.14-rc1 was out.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWbwh7Q8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylo2ACgoVQKQzUZ+xUPR2ushiqRzumHxF8AoNauS1r+
 w8HQCNYUV75voi5RmnjY
 =pSt4
 -----END PGP SIGNATURE-----

Merge tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull firmware removal from Greg KH:
 "Many many years ago (at the kernel summit in Boston), we all came to
  the agreement that the firmware/ tree should be dropped from the
  kernel, and everyone use the linux-firmware package instead. For some
  minor reason, David Woodhouse didn't send the pull request at that
  point in time, and everyone forgot about this.

  The topic came up in the hallway track at the Plumbers conference this
  week, so here's a single patch that drops the whole firmware tree. The
  last firmware update was back in 2013, and all distros have been using
  linux-firmware instead since at least that year, if not before. The
  only commits to that directory since 2013 was some kbuild fixups for
  various build tool issues.

  So lets finally drop this, we don't need to lug them around in the
  kernel source tree anymore, especially as no one wants or uses them.

  This has passed build testing with 0-day, I don't think it made it
  into linux-next this week, but I figured it was good to get in before
  4.14-rc1 was out"

* tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware: delete in-kernel firmware
2017-09-15 12:58:55 -07:00
Greg Kroah-Hartman 5620a0d1aa firmware: delete in-kernel firmware
The last firmware change for the in-kernel firmware source code was back
in 2013.  Everyone has been relying on the out-of-tree linux-firmware
package for a long long time.

So let's drop it, it's baggage we don't need to keep dragging around
(and having to fix random kbuild issues over time...)

Cc: Kyle McMartin <kyle@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-14 14:49:41 -07:00
Linus Torvalds a2bc8dea9e Kbuild updates for v4.14
- Use Make-builtin $(abspath ...) helper to get absolute path
 
 - Add W=2 extra warning option to detect unused macros
 
 - Use more KCONFIG_CONFIG instead hard-coded .config
 
 - Fix bugs of tar*-pkg targets
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZupWLAAoJED2LAQed4NsGVEEQAItJ0y1uxDr0cjJNE46N6p6+
 EMCWKWC2H0XR9oFRY1y5utYWIwRauIaESgGg1qMU6Lbg5qZamggpNrYVH207tCz1
 gNkU8wwc2SXpxJy2eG2asxY9L2mL0a5fFFOgxIxoz+hCTgr4Yk1IGnTH9+GPQKtW
 thduXxTvcB4/oNTOgUHNj/7j9ydn7ETTOjsCoaEwBZqtBaaEBj20h6EOhgX+ouMd
 5P9YoCbfk28KHKlnMd8sNHV5SLKb94wCwoM/QIOLl42rwIAc81dUgOmaMGeflXF9
 zBH1exi4ID9SyQyuMZemJNe0bD6YR2qG0Sf1t2eDnhxmcav7Vwk+WV7Pdpr8UWw8
 Lot9yPJQA43kfYj6pfCJFXzWEduNT48zGGBJb30WyGkBkidNNGkujdSeI36swEQD
 fPV9tHPk48OSNPqJWZXehezBqN9U5Sa1M9dk5TNA69mzdZgNp052flxywBQ/SGTO
 +h17SREP9Mm6CQ9ApfHaOlMr40/mpCCDq+p8pfem5ZtnBby9k4uNp2P9hAMTJdw8
 5AOdwB0MdzvMQgF5UO0kklk6HGUZTAGHi91k5k3e+DPydt9+2ntZFZoVwVYaD756
 E55KKrQZqSO758gnN9Wbr8ihgOhNI3ZA320nCjfwQdnUqQ496KAkLpgVALF8pEVi
 /xIBawfQNj9BlDc3Y3jo
 =Tam1
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Use Make-builtin $(abspath ...) helper to get absolute path

 - Add W=2 extra warning option to detect unused macros

 - Use more KCONFIG_CONFIG instead hard-coded .config

 - Fix bugs of tar*-pkg targets

* tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: buildtar: do not print successful message if tar returns error
  kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled
  kbuild: Use KCONFIG_CONFIG in buildtar
  Kbuild: enable -Wunused-macros warning for "make W=2"
  kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
2017-09-14 13:46:33 -07:00
Linus Torvalds 81a84ad3cb Merge branch 'docs-next' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
 "After a fair amount of churn in the last couple of cycles, docs are
  taking it easier this time around. Lots of fixes and some new
  documentation, but nothing all that radical. Perhaps the most
  interesting change for many is the scripts/sphinx-pre-install tool
  from Mauro; it will tell you exactly which packages you need to
  install to get a working docs toolchain on your system.

  There are two little patches reaching outside of Documentation/; both
  just tweak kerneldoc comments to eliminate warnings and fix some
  dangling doc pointers"

* 'docs-next' of git://git.lwn.net/linux: (52 commits)
  Documentation/sphinx: fix kernel-doc decode for non-utf-8 locale
  genalloc: Fix an incorrect kerneldoc comment
  doc: Add documentation for the genalloc subsystem
  assoc_array: fix path to assoc_array documentation
  kernel-doc parser mishandles declarations split into lines
  docs: ReSTify table of contents in core.rst
  docs: process: drop git snapshots from applying-patches.rst
  Documentation:input: fix typo
  swap: Remove obsolete sentence
  sphinx.rst: Allow Sphinx version 1.6 at the docs
  docs-rst: fix verbatim font size on tables
  Documentation: stable-kernel-rules: fix broken git urls
  rtmutex: update rt-mutex
  rtmutex: update rt-mutex-design
  docs: fix minimal sphinx version in conf.py
  docs: fix nested numbering in the TOC
  NVMEM documentation fix: A minor typo
  docs-rst: pdf: use same vertical margin on all Sphinx versions
  doc: Makefile: if sphinx is not found, run a check script
  docs: Fix paths in security/keys
  ...
2017-09-03 21:07:29 -07:00
Linus Torvalds 569dbb88e8 Linux 4.13 2017-09-03 13:56:17 -07:00
Masahiro Yamada 8e9b466799 kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).

Commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.

This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.

I am intentionally using $(realpath ...) instead $(abspath ...) in
some places.  The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist.  It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
2017-09-01 08:50:32 +09:00
Linus Torvalds cc4a41fe55 Linux 4.13-rc7 2017-08-27 17:20:40 -07:00
Linus Torvalds f7bbf0754b Kbuild fixes for v4.13
- fix linker script regression caused by dead code elimination support
 
 - fix typos and outdated comments
 
 - specify kselftest-clean as a PHONY target
 
 - fix "make dtbs_install" when $(srctree) includes shell special
   characters like '~'
 
 - Move -fshort-wchar to the global option list because defining it
   partially emits warnings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZnvezAAoJED2LAQed4NsGTK0P/jZY3jNT3tzgldH5ggCeA7Z2
 qekRVR3z0CCm3FU+NlWLVNsiyWDRxuN93lIVML8f7wt/kuJDNxycx5G7+Yiw60yH
 h41gibJJdS3GL+VzfGUk1WeZkoAiGVVbLvENJzOQRIeHblsi8Ris+pBwT3MY/WKl
 XM0k+xsc/abB3dnhgws8WiUvrNhRiqsciq7IBkDPzxGa4JC53+9Yjjc1HA6gah+g
 gKX2qZmsjKm9Hsueot9clTttT+iDHmJ0QetHeMGy0T6bqjlRzG+H37ZGtGv3ZP4p
 wcsct8QJt+8/TSEtvkROg2apBUlrEkblvsL/G2UFew42Fz4Z3XLariHTcrDoYuHY
 IiUc/tUbmx6Ft72ZvepD+qN+rxQiWKqRzTD+7sDDNPPbdgC4pwZ2Z6m7Oih8mRT5
 jGlex4PN/rA5ZvTDFF8c/1GhStZrfxM7A7t6k4Snui6hOpxcpK9vHDgKrfGjk83h
 xkwvrPIXnreaAvUYz18JhTU1Zuzj5vwIZgPI1bRl3fi4JmagsAwl+IJawWXMFODA
 WONJnqavCYRcdffD0cGfJqA8YSmpxfiDxtP7NiOt05jagDHDGH6bbsUR5Oni/9wU
 9D8wdn4XdrrYGG2kEVMDa0x4Yn8vVuPfyxy5DgcRciMcYCUfNHOIHFutRvFhwcqm
 rV7ege5oIH8DdsWoE5pj
 =m8Zm
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix linker script regression caused by dead code elimination support

 - fix typos and outdated comments

 - specify kselftest-clean as a PHONY target

 - fix "make dtbs_install" when $(srctree) includes shell special
   characters like '~'

 - Move -fshort-wchar to the global option list because defining it
   partially emits warnings

* tag 'kbuild-fixes-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: update comments of Makefile.asm-generic
  kbuild: Do not use hyphen in exported variable name
  Makefile: add kselftest-clean to PHONY target list
  Kbuild: use -fshort-wchar globally
  fixdep: trivial: typo fix and correction
  kbuild: trivial cleanups on the comments
  kbuild: linker script do not match C names unless LD_DEAD_CODE_DATA_ELIMINATION is configured
2017-08-24 14:22:27 -07:00
Shuah Khan 801d2e9f1c Makefile: add kselftest-clean to PHONY target list
kselftest-clean isn't in the PHONY target list. Add it.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-21 09:05:59 +09:00
Arnd Bergmann 8c97023cf0 Kbuild: use -fshort-wchar globally
Commit 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
added the --no-wchar-size-warning to the Makefile to avoid this
harmless warning:

arm-linux-gnueabi-ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

Changing kbuild to use thin archives instead of recursive linking
unfortunately brings the same warning back during the final link.

The kernel does not use wchar_t string literals at this point, and
xen does not use wchar_t at all (only efi_char16_t), so the flag
has no effect, but as pointed out by Jan Beulich, adding a wchar_t
string literal would be bad here.

Since wchar_t is always defined as u16, independent of the toolchain
default, always passing -fshort-wchar is correct and lets us
remove the Xen specific hack along with fixing the warning.

Link: https://patchwork.kernel.org/patch/9275217/
Fixes: 971a69db7d ("Xen: don't warn about 2-byte wchar_t in efi")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-21 09:05:59 +09:00
Linus Torvalds 14ccee78fc Linux 4.13-rc6 2017-08-20 14:13:52 -07:00
Linus Torvalds ef954844c7 Linux 4.13-rc5 2017-08-13 16:01:32 -07:00
Cao jin 312a3d0918 kbuild: trivial cleanups on the comments
This is a bunch of trivial fixes and cleanups.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-10 00:58:20 +09:00
Linus Torvalds aae4e7a8bc Linux 4.13-rc4 2017-08-06 18:44:49 -07:00
Linus Torvalds 16f73eb02d Linux 4.13-rc3 2017-07-30 12:40:36 -07:00
Linus Torvalds 520eccdfe1 Linux 4.13-rc2 2017-07-23 16:15:17 -07:00
Mauro Carvalho Chehab 18afab8c1d docs: Makefile: remove no-ops targets
After removal of DocBook, those targets are bogus.

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-07-23 15:50:48 -06:00
Linus Torvalds 5771a8c088 Linux v4.13-rc1 2017-07-15 15:22:10 -07:00
Linus Torvalds 80fc623809 Kbuild updates for v4.13 (2nd)
- Move generic-y of exported headers to uapi/asm/Kbuild
   for complete de-coupling of UAPI
 
 - Clean up scripts/Makefile.headersinst
 
 - Fix host programs for 32 bit machine with XFS file system
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZZ5yPAAoJED2LAQed4NsGSHkP/1sQy6k7OnBZKNzYsYXdUfQT
 tNm+k0NVZJk2jSa2ASHFMCEywnZ/afBU6nyvYSs4zKI6biaV/k0XZ2PqN0JDNmNh
 9cZEoW1iPgnmu6Y+VxFxezjO34Qr2Gi94e55SO8qSfCZsrfcsr4OMCNTd67ar2YB
 IbIV5+sCCO/dzkX9F2UnNX+elt2PfJ1yoJCeVHOmMmtv+I5MbQhNhpF9gElhYSc3
 dDckZvoNOPCP5ddQcUqLbIFL1GVzse4XkY5l766RlnvPjguNmktzrRBxtOT3g6oP
 kJSmYYh7DcctTFS8c1lqf0ERNxoshGBIagPieROVF1wpBXY8hDsUPV6Xr/L/5qPo
 Iy4A8SsvRADRPf5HKspN6ykg0/bttcNOCBIp2EEYuxomIa9D3BTf8vJZaJU/LrYv
 zsZMQ5t78oH6HmkubmGlvb/5Mvt/Vi5upXHgmJtZ4cwT1meURpOhcPmoer4hs++/
 QimZ5JnngAhB8w5oYPr/3vnJaWUA1VZnmZq64AXPHQoExc+Q9gJUtan91GjIq/Kb
 HVKpDQn82/qfPFoTiJ4/CksLtF/s9e20CzGfFbPE8N9ekJoWGnIFW7yly2Bi/5C7
 4oBjLT9gDZP5+nouM14/DwPCmjVTmx29Uj9aXDrE9a+jhKeycKWNeAx6coHiqS8v
 DK7gzKyuovdmuu5T7y9P
 =Sw8W
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - Move generic-y of exported headers to uapi/asm/Kbuild for complete
   de-coupling of UAPI

 - Clean up scripts/Makefile.headersinst

 - Fix host programs for 32 bit machine with XFS file system

* tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  kbuild: Enable Large File Support for hostprogs
  kbuild: remove wrapper files handling from Makefile.headersinst
  kbuild: split exported generic header creation into uapi-asm-generic
  kbuild: do not include old-kbuild-file from Makefile.headersinst
  xtensa: move generic-y of exported headers to uapi/asm/Kbuild
  unicore32: move generic-y of exported headers to uapi/asm/Kbuild
  tile: move generic-y of exported headers to uapi/asm/Kbuild
  sparc: move generic-y of exported headers to uapi/asm/Kbuild
  sh: move generic-y of exported headers to uapi/asm/Kbuild
  parisc: move generic-y of exported headers to uapi/asm/Kbuild
  openrisc: move generic-y of exported headers to uapi/asm/Kbuild
  nios2: move generic-y of exported headers to uapi/asm/Kbuild
  nios2: remove unneeded arch/nios2/include/(generated/)asm/signal.h
  microblaze: move generic-y of exported headers to uapi/asm/Kbuild
  metag: move generic-y of exported headers to uapi/asm/Kbuild
  m68k: move generic-y of exported headers to uapi/asm/Kbuild
  m32r: move generic-y of exported headers to uapi/asm/Kbuild
  ia64: remove redundant generic-y += kvm_para.h from asm/Kbuild
  hexagon: move generic-y of exported headers to uapi/asm/Kbuild
  h8300: move generic-y of exported headers to uapi/asm/Kbuild
  ...
2017-07-13 13:37:57 -07:00
Linus Torvalds bd664f6b3e disable new gcc-7.1.1 warnings for now
I made the mistake of upgrading my desktop to the new Fedora 26 that
comes with gcc-7.1.1.

There's nothing wrong per se that I've noticed, but I now have 1500
lines of warnings, mostly from the new format-truncation warning
triggering all over the tree.

We use 'snprintf()' and friends in a lot of places, and often know that
the numbers are fairly small (ie a controller index or similar), but gcc
doesn't know that, and sees an 'int', and thinks that it could be some
huge number.  And then complains when our buffers are not able to fit
the name for the ten millionth controller.

These warnings aren't necessarily bad per se, and we probably want to
look through them subsystem by subsystem, but at least during the merge
window they just mean that I can't even see if somebody is introducing
any *real* problems when I pull.

So warnings disabled for now.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 19:25:47 -07:00
Uwe Kleine-König d7f14c66c2 kbuild: Enable Large File Support for hostprogs
This fixes the following build error for me when building on an 32 bit
machine using an XFS file system:

	$ make scripts/basic/fixdep
	  HOSTCC  scripts/basic/fixdep
	fixdep: error fstat'ing depfile: scripts/basic/.fixdep.d: Value too large for defined data type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-11 21:33:54 +09:00
Masahiro Yamada a9d9a400e0 kbuild: split exported generic header creation into uapi-asm-generic
When we install headers, we are interested only in headers under uapi
directories.  Split out uapi-asm-generic target and make headers_install
depend on it.  It will avoid generating unneeded asm-generic wrappers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-11 21:33:54 +09:00
Masahiro Yamada a8ff49a1d9 kbuild: pass dst= to Makefile.headersinst from top Makefile
We can always pass dst= from the top Makefile.  This will simplify
the logic in Makefile.headersinst.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-10 03:43:19 +09:00