A recent commit (272725c7db) has removed
the use of 'bits_per_pixel' in DRM. However the corresponding Exynos
driver code still uses the ambiguous 'bpp', even though it is now
initialized from fb->cpp[0].
Consistenly use 'cpp' in FIMD, DECON7 and DECON5433 drivers.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
We always translate the dma address such that the offsets of
the source image are zero. Hence we can remove manipulation of
the MXR_GRAPHIC_SXY(win) register and just zero them once
in mixer_win_reset().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can collapse the default case
of the switch statement with the XRGB8888 case.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can drop the default case of
the switch statement and collapse most of the code.
Also rename the two booleans to reflect what true/false
actually means, and to avoid mixing CrCb/NV21 descriptions.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The video processor supports a tiled version of the NV12 format,
known as NV12MT in V4L2 terms. The support was removed in commit
083500baef due to not being a real
pixel format, but rather NV12 with a special memory layout.
With the introduction of FB modifiers, we can now properly support
this format again.
Tested with a hacked up modetest from libdrm's test suite on
an ODROID-X2 (Exynos4412).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current comment sounds like the division op is done to
compensate for some hardware erratum. But the chroma plane
having half the height of the luma plane is just the way
NV12/NV21 is defined, so clarify this behaviour.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since panel's mode of work is propagated properly from panel to DECON,
there is no need to use redundant private device tree property.
The only issue with such approach is that check for required interrupts
should be postponed until panel communicate its requirements, ie to
mode validation phase - mode_valid callback.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
crtc::mode_valid callback is required to implement proper pipeline
validation for command/video modes. Since Exynos uses private
framework such callback should be added to it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
To allow runtime validation of mode of work irq request
code should be split into two separate phases:
- irq reqesting,
- irq checking.
Following patches will move 2nd phase to mode validation phase.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
MIC driver should use info from CRTC to check mode of work instead of
illegally peeking into nodes of other devices.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
mipi_dsi framework provides information about panel's mode of work.
This info should be propagated upstream to configure all elements of
the pipeline. As CRTC is the common denominator of the pipeline we can
put such info into its structures.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Description of drm_helper_hpd_irq_event clearly states that drivers
supporting hotplug events per connector should use different helper -
drm_kms_helper_hotplug_event. To achieve it following changes have
been performed:
- moved down all DSI ops - they require exynos_dsi_disable function
to be defined earlier,
- simplified exynos_dsi_detect - there is no real detection, it just
returns if panel is attached,
- DSI attach/detach callbacks attaches/detaches DRM panel and sets
connector status and other context fields accordingly, all this is
performed under mutex, as these callbacks are asynchronous.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All encoders share the same code to set encoders possible_crtcs field.
The patch creates helper to abstract out this code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linux core provide helpers for polling with timeout, lets use them.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
A single patch switching to a new OF helper.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZnppSAAoJEBx+YmzsjxAg6vMP/RI+NyOPQAuYqYOJjJvPXhlZ
9Dq8FeZvLpBINk8QFtjorC5Nn7wMFwpgYU2y+bbOG7TWR5fftL+nxgTf7klL05Lc
OPL8ug3tGZBpvzRify4dWJHmG71Imb892RNOKDL3ufIzfjEAI748r1kfrWkUJMfH
9CQay9TH1KjC8vPtLM+QP3PbZ6qJnBKYlL2oAC4oFcnhxauD2WlrCfjKjs/ywI3L
MixKObGPBhJM5otii6T6FqfYVqO7netpm6nyZeBpFwX6RBR7SiC/WF3zdvm5gXgx
5EowwfZ39cTzycrwYrJKuszotDXmw7woZLZQ2bM/SCo96cXHtNhfCausGfjyDfZL
0aKeIXhqzKj/LHUXsLKBwZxmD7CpYGivdueOC5HUMDaQT+3UmUSnKIlLKpvmfarb
nbxCmKm0ITyIM6ppNF+OiZSTK2uszSckiro+HvvORqDlM4zhfmp+IrM8rvt5tj9r
4Q28HAkWlPvEeL/hJL/vPN0Q0fjQJ0pVqGP70S19N+CHBnXyDvsFk+qushgRXwzJ
K3C4GvSqJtp8cXgi0OOxuCM3o2POLrdMQJhXw7GxG/cuzWIeI36wZdRj2bYbo5CJ
zXMf9S2yXWB13iFRfdPqpMCZIKsMKsSEC2uoyprfetrgYJ+tOLGOSQKlie7OKigu
ckZ3XFozSq6OEIxD4Nfh
=lksW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i DRM changes for 4.14, take 2
A single patch switching to a new OF helper.
* tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: use of_graph_get_remote_endpoint()
* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9KX4
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm fixes for 4.14
* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck
* tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP2+: fix missing variable declaration
drm/omap: work-around for omap3 display enable
drm/omap: fix i886 work-around
drm/omap: fix analog tv-out modecheck
Updates for 4.14.. I have some further patches from Jordan to add
multiple priority levels and pre-emption, but those will probably be
for 4.15 to give me time for the mesa parts.
* tag 'drm-msm-next-2017-08-22' of git://people.freedesktop.org/~robclark/linux:
drm/msm/mdp5: mark runtime_pm functions as __maybe_unused
drm/msm: remove unused variable
drm/msm/mdp5: make helper function static
drm/msm: make msm_framebuffer_init() static
drm/msm: add helper to allocate stolen fb
drm/msm: don't track fbdev's gem object separately
drm/msm: add modeset module param
drm/msm/mdp5: add tracking for clk enable-count
drm/msm: remove unused define
drm/msm: Add a helper function for in-kernel buffer allocations
drm/msm: Attach the GPU MMU when it is created
drm/msm: Add A5XX hardware fault detection
drm/msm: Remove uneeded platform dev members
drm/msm/mdp5: Set up runtime PM for MDSS
drm/msm/mdp5: Write to SMP registers even if allocations don't change
drm/msm/mdp5: Don't use mode_set helper funcs for encoders and CRTCs
drm/msm/dsi: Implement RPM suspend/resume callbacks
drm/msm/dsi: Set up runtime PM for DSI
drm/msm/hdmi: Set up runtime PM for HDMI
drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks
Now, we can use of_graph_get_remote_endpoint(). Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Seems that on omap3 enabling a crtc without any planes causes a sync
lost flood. This only happens on the first enable, and after that it
works. This looks like an HW issue and it's unclear why this is
happening or how to fix it.
This started happening after 897145d0c7
("drm/omapdrm: Move commit_modeset_enables() before commit_planes()")
which, as a work-around, changed omapdrm first to do the modeset enable,
and plane set only after that. This WA should be fine on all DSS
versions, but apparently OMAP3 DSS is an exception.
This patch reverts that work-around for OMAP3 DSS.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
7d267f068a ("drm/omap: work-around for
errata i886") changed how the PLL dividers and multipliers are
calculated. While the new way should work fine for all the PLLs, it
breaks omap5 PLLs. The issues seen are rather odd: seemed that the
output clock rate is half of what we asked. It is unclear what's causing
there issues.
As a work-around this patch adds a "errata_i886" flag, which is set only
for DRA7's PLLs, and the PLL setup is done according to that flag.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
omapdrm rejects all venc (analog tv-out) videomodes, due to somewhat
strict checking of the values, making tv-out unusable.
We only support two videomodes, one for PAL and one for NTSC, so instead
of trying to check every field in the videomode struct, this patch makes
the driver check only the pixel clock and the size of the display.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When CONFIG_PM is disabled, we get harmless warnings about unused
functions:
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1025:12: error: 'mdp5_runtime_resume' defined but not used [-Werror=unused-function]
static int mdp5_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c:1015:12: error: 'mdp5_runtime_suspend' defined but not used [-Werror=unused-function]
static int mdp5_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~
This marks both functions as __maybe_unused so the compiler
can drop them silently.
Fixes: d68fe15b18 ("drm/msm/mdp5: Use runtime PM get/put API instead of toggling clocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
A cleanup left behind an unused variable that we have to remove
in order to avoid this harmless warning:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'a5xx_zap_shader_init':
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:493:19: error: unused variable 'a5xx_gpu' [-Werror=unused-variable]
Fixes: 8d6f08272b ("drm/msm: Remove uneeded platform dev members")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
We'll later want to re-use this for state-readback when bootloader
enables display, so that we can create an fb for the initial
plane->state->fb.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The drm_framebuffer is refcnt'd these days and will unref the underlying
bo as needed. So we can simplify a little.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Accessing registers for an unclocked block is an insta-reboot on
snapdragon devices. So add a bit of logic to track the enable_count so
we can WARN_ON() unclocked register writes. This makes it much easier
to track down mistakes.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Nearly all of the buffer allocations for kernel allocate an buffer object,
virtual address and GPU iova at the same time. Make a helper function to
handle the details.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[dropped msm_fbdev conversion to new helper, since it interferes with
display-handover work, where we want to separate allocation and mapping]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently the GPU MMU is attached in the adreno_gpu code but as
more and more of the GPU initialization moves to the generic
GPU path we have a need to map and use GPU memory earlier and
earlier. There isn't any reason to defer attaching the MMU
until later so attach it right after the address space is
created so it can be used immediately.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.
Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.
Detected by CoverityScan, CID#1375915 ("Array compared against 0")
Fixes: f479c0ba4a ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.
The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.
While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.
(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
so not able to 100% confirm that no other changes from GP107
are needed. Quick testing shows it seems to work well enough
for display. Due to NVIDIA dragging their heels on getting
signed firmware to us, this is the best we can do for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.
Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
variable in ipu_plane_atomic_update
-----BEGIN PGP SIGNATURE-----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=nXzK
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm: lock scanout transfers for consecutive bursts
- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
variable in ipu_plane_atomic_update
* tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: lock scanout transfers for consecutive bursts
drm/imx: ipuv3-plane: use fb local variable instead of state->fb
Final pile of features for 4.14
- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
lookups (Chris)
gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.
Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!
* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
drm/i915: Update DRIVER_DATE to 20170818
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915: Mark the GT as busy before idling the previous request
drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
drm/i915: Replace execbuf vma ht with an idr
drm/i915: Simplify eb_lookup_vmas()
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
drm/i915: Check context status before looking up our obj/vma
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
drm/i915: Stop touching forcewake following a gen6+ engine reset
MAINTAINERS: drm/i915 has a new maintainer team
drm/i915: Split pin mapping into per platform functions
drm/i915/opregion: let user specify override VBT via firmware load
drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
drm/i915/gen10: implement gen 10 watermarks calculations
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915/cnl: Setup PAT Index.
drm/i915/edp: Allow alternate fixed mode for eDP if available.
drm/i915: Add support for drm syncobjs
...
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
-----BEGIN PGP SIGNATURE-----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=ZaxL
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: Prevent BOs from being freed during job submission
drm/tegra: gem: Implement mmap() for PRIME buffers
drm/tegra: Support render node
drm/tegra: sor: Trace register accesses
drm/tegra: dpaux: Trace register accesses
drm/tegra: dsi: Trace register accesses
drm/tegra: hdmi: Trace register accesses
drm/tegra: dc: Trace register accesses
drm/tegra: sor: Use unsigned int for register offsets
drm/tegra: hdmi: Use unsigned int for register offsets
drm/tegra: dsi: Use unsigned int for register offsets
drm/tegra: dpaux: Use unsigned int for register offsets
drm/tegra: dc: Use unsigned int for register offsets
drm/tegra: Fix NULL deref in debugfs/iova
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
drm/tegra: Set MODULE_FIRMWARE for the VIC
drm/tegra: Add CONFIG_OF dependency
gpu: host1x: Support sub-devices recursively
gpu: host1x: fix error return code in host1x_probe()
gpu: host1x: Fix bitshift/mask multipliers
...
this cycle has been fairly calm in etnaviv land with most of the action
happening on the userspace side.
Notable changes:
- Improvements to CONFIG option handling to make it harder for users to
shoot themselves in the foot due to kernel misconfiguration.
- Tweaked GEM object population, so that userspace can take considerate
action when memory allocation fails, rather than waking the raging OOM
killer beast.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAIL
drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabled
drm/etnaviv: switch to drm_*{get,put} helpers
drm/etnaviv: select CMA and DMA_CMA if available
drm/etnaviv: populate GEM objects on cpu_prep
drm/etnaviv: reduce allocation failure message severity
drm/etnaviv: don't trigger OOM killer when page allocation fails
This is the amdkfd pull request for 4.14 merge window.
AMD has started cleaning the pipe and sending patches from their internal
development to the upstream community.
The plan as I understand it is to first get all the non-dGPU patches to
upstream and then move to upstream dGPU support.
The patches here are relevant only for Kaveri and Carrizo.
The following is a summary of the changes:
- Add new IOCTL to set a Scratch memory VA
- Update PM4 headers for new firmware that support scratch memory
- Support image tiling mode
- Remove all uses of BUG_ON
- Various Bug fixes and coding style fixes
* tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux: (24 commits)
drm/amdkfd: Implement image tiling mode support v2
drm/amdgpu: Add kgd kfd interface get_tile_config() v2
drm/amdkfd: Adding new IOCTL for scratch memory v2
drm/amdgpu: Add kgd/kfd interface to support scratch memory v2
drm/amdgpu: Program SH_STATIC_MEM_CONFIG globally, not per-VMID
drm/amd: Update MEC HQD loading code for KFD
drm/amdgpu: Disable GFX PG on CZ
drm/amdkfd: Update PM4 packet headers
drm/amdkfd: Clamp EOP queue size correctly on Gfx8
drm/amdkfd: Add more error printing to help bringup v2
drm/amdkfd: Handle remaining BUG_ONs more gracefully v2
drm/amdkfd: Allocate gtt_sa_bitmap in long units
drm/amdkfd: Fix doorbell initialization and finalization
drm/amdkfd: Remove BUG_ONs for NULL pointer arguments
drm/amdkfd: Remove usage of alloc(sizeof(struct...
drm/amdkfd: Fix goto usage v2
drm/amdkfd: Change x==NULL/false references to !x
drm/amdkfd: Consolidate and clean up log commands
drm/amdkfd: Clean up KFD style errors and warnings v2
drm/amdgpu: Remove hard-coded assumptions about compute pipes
...
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
-----BEGIN PGP SIGNATURE-----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=6GJs
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.14
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
* tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
sun4i_hdmi: add CEC support
dt-bindings: display: sunxi: Improve endpoint ID scheme readability
drm/sun4i: tcon: remove unused function
drm/sun4i: Remove useless atomic_check
drm/sun4i: Add if statement instead of depends on
drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
drm/sun4i: constify drm_plane_helper_funcs
More changes for 4.14. Highlights:
- command submission overhead improvements
- Huge page support for vega10
- physical mode support for mjpeg for asics that don't support UVD vm
- improve ttm_mem_type_manager_func debug
- misc ttm fixes, cleanups
- misc gpuvm cleanups
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
drm/ttm: use reservation_object_trylock in ttm_bo_individualize_resv v2
drm/amdgpu: fix vega10 graphic hang issue in S3 test
drm/amdgpu: bump version for support of UVD MJPEG decode
drm/amdgpu: add MJPEG check for UVD physical mode msg buffer
drm/ttm: Fix accounting error when fail to get pages for pool
drm/amd/amdgpu: expose fragment size as module parameter (v2)
drm/amd/amdgpu: store fragment_size in vm_manager
drm/amdgpu: rename VM invalidated to moved
drm/amdgpu: separate bo_va structure
drm/amdgpu: drop the extra VM huge page flag v2
drm/amdgpu: remove superflous amdgpu_bo_kmap in the VM
drm/amdgpu: cleanup static CSA handling
drm/amdgpu: SHADOW and VRAM_CONTIGUOUS flags shouldn't be used by userspace
drm/amdgpu: save list length when fence is signaled
drm/amdgpu: move vram usage tracking into the vram manager v2
drm/amdgpu: move gtt usage tracking into the gtt manager v2
drm/amdgpu: move debug print into the MM managers
drm/amdgpu: fix incorrect use of the lru_lock
drm/radeon: fix incorrect use of the lru_lock
drm/ttm: make ttm_mem_type_manager_func debug more useful
...
Fixes a false positive from might_sleep(). The reservation object is freshly
initialized, so nobody else can hold the mutex but the function is
called from atomic context.
v2: Correctly invert the check as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmVGT_INDEX_TYPE has no default value, need to make sure
it's initialized when gfx is initialized.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Archit requested this backmerge to facilitate merging some patches
depending on changes between -rc2 & -rc5
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The commit 213e08ad60
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921
Fixes: f10e4bf663 ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
In a synchronous setup, we may retire the last request before we
complete allocating the next request. As the last request is retired, we
queue a timer to mark the device as idle, and promptly have to execute
ad cancel that timer once we complete allocating the request and need to
keep the device awake. If we rearrange the mark_busy() to occur before
we retire the previous request, we can skip this ping-pong.
v2: Joonas pointed out that unreserve_seqno() was now doing more than
doing seqno handling and should be renamed to reflect its wider purpose.
That also highlighted the new asymmetry with reserve_seqno(), so fixup
that and rename both to [un]reserve_engine().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817144719.10968-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This was the competing idea long ago, but it was only with the rewrite
of the idr as an radixtree and using the radixtree directly ourselves,
along with the realisation that we can store the vma directly in the
radixtree and only need a list for the reverse mapping, that made the
patch performant enough to displace using a hashtable. Though the vma ht
is fast and doesn't require any extra allocation (as we can embed the node
inside the vma), it does require a thread for resizing and serialization
and will have the occasional slow lookup. That is hairy enough to
investigate alternatives and favour them if equivalent in peak performance.
One advantage of allocating an indirection entry is that we can support a
single shared bo between many clients, something that was done on a
first-come first-serve basis for shared GGTT vma previously. To offset
the extra allocations, we create yet another kmem_cache for them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-5-chris@chris-wilson.co.uk
Since the introduction of being able to perform a lockless lookup of an
object (i915_gem_object_get_rcu() in fbbd37b36f ("drm/i915: Move object
release to a freelist + worker") we no longer need to split the
object/vma lookup into 3 phases and so combine them into a much simpler
single loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-4-chris@chris-wilson.co.uk
When userspace is doing most of the work, avoiding relocs (using
NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we
still spend a lot of time processing the arrays in execbuf, even though
we now should have nothing to do most of the time. One issue that
becomes readily apparent in profiling anv is that iterating over the
large execobj[] is unfriendly to the loop prefetchers of the CPU and it
much prefers iterating over a pair of arrays rather than one big array.
v2: Clear vma[] on construction to handle errors during vma lookup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-3-chris@chris-wilson.co.uk
Since we keep the context around across the slow lookup where we may
drop the struct_mutex, we should double check that the context is still
valid upon reacquisition.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
MI_STORE_DWORD_IMM just doesn't work on the video decode engine under
Sandybridge, so refrain from using it. Then switch the selftests over to
using the now common test prior to using MI_STORE_DWORD_IMM.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Forcewake is not affected by the engine reset on gen6+. Indeed the
reason why we added intel_uncore_forcewake_reset() to
gen6_reset_engines() was to keep the bookkeeping intact because the
reset did not touch the forcewake bit (yet we cancelled the forcewake
consumers)! This was done in commit 521198a2e7095:
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
In reset we try to restore the forcewake state to
pre reset state, using forcewake_count. The reset
doesn't seem to clear the forcewake bits so we
get warn on forcewake ack register not clearing.
That futzing of the forcewake bookkeeping was dropped in commit
0294ae7b44 ("drm/i915: Consolidate forcewake resetting to a single
function"), but it did not make the realisation that the remaining
intel_uncore_forcewake_reset() was redundant.
The new danger with using intel_uncore_forcewake_reset() with per-engine
resets is that the driver and hw are still in an active state as we
perform the reset. We may be using the forcewake to read protected
registers elsewhere and those results may be clobbered by the concurrent
dropping of forcewake.
Reported-by: Michel Thierry <michel.thierry@intel.com>
Fixes: 142bc7d99b ("drm/i915: Modify error handler for per engine hang recovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817173229.20324-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
NULL check at line 528: if (!sender || !data_out || !len_out) {, implies
that pointer _sender_ might be NULL.
Move pointer _sender_ dereference after NULL check in order to avoid a
potential NULL pointer dereference.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812015515.GA8360@embeddedgus
Cleanup the code. Map the pins in accordance to
individual platforms rather than according to ports.
Create separate functions for platforms.
v2:
- Add missing condition for CoffeeLake. Make platform
specific functions static. Add function
i915_ddc_pin_mapping().
v3:
- Rename functions to x_port_to_ddc_pin() which directly
indicates the purpose. Correct default return values on CNP
and BXT. Rename i915_port_to_ to g4x_port_to since that was
the first platform to run this. Correct code style. (Paulo)
Sugested-by Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502927114-24012-1-git-send-email-anusha.srivatsa@intel.com
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When fail to get needed page for pool, need to put allocated pages
into pool. But current code has a miscalculation of allocated pages,
correct it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Allow overrides on the command line.
v2: agd: sqaush in spelling fix and bogus default value warning
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adds fragment_size in the vm_manager structure and
implements hardware setup for it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That better describes what happens here with the BO.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split that into vm_bo_base and bo_va to allow other uses as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just add the flags to the addr field as well.
v2: add some more comments that the flag is for huge pages.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We now properly kmap all BOs after validation.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the CSA bo_va from the VM to the fpriv structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The shadow handling isn't implemented completely for userspace BOs and
the kernel sets the VRAM_CONTIGUOUS as necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the list first to avoid redundant checks.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Looks like a better place for this.
v2: use atomic64_t members instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't make much sense to count those numbers twice.
v2: use and atomic64_t instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of the separate switch/case in the calling function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BO manager has its own lock and doesn't use the lru_lock.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BO manager has its own lock and doesn't use the lru_lock.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Provide the drm printer directly instead of just the callback.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This helps map DMA addresses back to physical addresses.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(v2): Added tracepoints for USERPTR, SG mappings, and
SWIOTBL mappings. Reformatted trace call perform
PCI decoding internal to the trace.
(v3): Add unmap tracepoints as well
(v4): Move traces into separate functions
Those values weren't correct. This should result in quite some speedup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to do this on every CS.
v2: remove all other bind, reorder code
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should save us a bunch of command submission overhead.
v2: move the LRU move to the right place to avoid the move for the root BO
and handle the shadow BOs as well. This turned out to be a bug fix because
the move needs to happen before the kmap.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the BOs reservation object when it is put on the ddelete list. This way we
avoid delaying freeing up the BO because of new fences on the reservation object.
This is used by dma-buf and amdgpu's VM page tables.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With shared reservation objects the assumption that no fence
could have been added isn't true any more.
Additional to that the BO is about to be destroyed, so removing the
fences now has no advantage whatsoever.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7wKU
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm changes for v4.14
* HDMI hot plug IRQ support (instead of polling)
* Big driver cleanup from Laurent (no functional changes)
* OMAP5 DSI support (only the pinmuxing was missing)
* tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits)
drm/omap: Potential NULL deref in omap_crtc_duplicate_state()
drm/omap: remove no-op cleanup code
drm/omap: rename omapdrm device back
drm: omapdrm: Remove omapdrm platform data
ARM: OMAP2+: Don't register omapdss device for omapdrm
ARM: OMAP2+: Remove unused omapdrm platform device
drm: omapdrm: Remove the omapdss driver
drm: omapdrm: Register omapdrm platform device in omapdss driver
drm: omapdrm: hdmi: Don't allocate PHY features dynamically
drm: omapdrm: hdmi: Configure the PHY from the HDMI core version
drm: omapdrm: hdmi: Configure the PLL from the HDMI core version
drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio
drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version
drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix
drm/omap: add OMAP5 DSIPHY lane-enable support
drm/omap: use regmap_update_bit() when muxing DSI pads
drm: omapdrm: Remove dss_features.h
drm: omapdrm: Move supported outputs feature to dss driver
drm: omapdrm: Move DSS_FCK feature to dss driver
drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver
...
More features for 4.14. Nothing too major here. I have a few more additional
patches for large page support in vega10 among other things, but they require
some resevation object patches from drm-misc-next, so I'll send that request
once you've pulled the latest drm-misc-next. Highlights:
- Fixes for ACP audio on stoney
- SR-IOV fixes for vega10
- various powerplay fixes
- lots of code clean up
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits)
drm/amdgpu/gfx7: fix function name
drm/amd/amdgpu: Disabling Power Gating for Stoney platform
drm/amd/amdgpu: Added a quirk for Stoney platform
drm/amdgpu: jt_size was wrongly counted twice
drm/amdgpu: fix missing endian-safe guard
drm/amdgpu: ignore digest_size when loading sdma fw for raven
drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind()
drm/amd/powerplay: fix coding style in hwmgr.c
drm/amd/powerplay: refine dmesg info under powerplay.
drm/amdgpu: don't finish the ring if not initialized
drm/radeon: Fix preferred typo
drm/amdgpu: Fix preferred typo
drm/radeon: Fix stolen typo
drm/amdgpu: Fix stolen typo
drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c
drm/amdgpu: set gfx_v9_0_ip_funcs as static
drm/radeon: switch to drm_*{get,put} helpers
drm/amdgpu: switch to drm_*{get,put} helpers
drm/amd/powerplay: add CZ profile support
drm/amd/powerplay: fix PSI not enabled by kmd
...
Since DRM IOCTL's are lockless, there is a chance that BOs could be
released while a job submission is in progress. To avoid that, keep the
GEM reference until the job has been pinned, part of which will be to
take another reference.
v2: remove redundant check and avoid memory leak
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The mapping of PRIME buffers can reuse much of the GEM mapping code, so
extract the common bits into a new tegra_gem_mmap() helper.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
None of the driver-specific IOCTLs are privileged, so mark them as such
and advertise that the driver supports render nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register offsets are usually fairly small numbers, so an unsigned int is
more than enough to represent them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When IOMMU is off, ->mm_lock is not initialized and ->mm is NULL.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The defines are set anyway to prevent an empty string. The test for the
SoC is the same as for Nouveau for the Tegra GPU firmware (see
drivers/gpu/drm/nouveau/nouveau_platform.c)
v2:
- Place the defines above each chip's vic_config struct
- MODULE_FIRMWARE() at the end of the file
Fixes: 0ae797a8ba ("drm/tegra: Add VIC support")
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Without CONFIG_OF, we can run into a build error:
drivers/gpu/drm/tegra/dpaux.c:378:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function); did you mean 'pinconf_generic_params'?
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
pinconf_generic_params
drivers/gpu/drm/tegra/dpaux.c:379:17: error: 'pinconf_generic_dt_free_map' undeclared here (not in a function); did you mean 'pinconf_generic_params'?
This adds an explicit dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Sometimes it would be most enlightening to debug systems by replacing
the VBT to be used. For example, in the referenced bug the BIOS provides
different VBT depending on the boot mode (UEFI vs. legacy). It would be
interesting to try the failing boot mode with the VBT from the working
boot, and see if that makes a difference.
Add a module parameter to load the VBT using the firmware loader, not
unlike the EDID firmware mechanism.
As a starting point for experimenting, one can pick up the BIOS provided
VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt.
v2: clarify firmware load return value check (Bob)
v3: kfree the loaded firmware blob
References: https://bugs.freedesktop.org/show_bug.cgi?id=97822#c83
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817115209.25912-1-jani.nikula@intel.com
UAPI Changes:
- vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric)
Cross-subsystem Changes:
- vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained
in staging
Core Changes:
- atomic_legacy_backoff is officially killed (Daniel)
- Extract drm_device.h (Daniel)
- Unregister drm device on unplug (Daniel)
- Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir)
Driver Changes:
- vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric)
- various: Make various drm_*_funcs structs const (Bhumika)
- tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David)
- various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Cc: Cihangir Akturk <cakturk@gmail.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
* tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits)
drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset()
drm/virtio: Use the drm_driver.dumb_destroy default
drm/bochs: Use the drm_driver.dumb_destroy default
drm/mgag200: Use the drm_driver.dumb_destroy default
drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults
drm/msm: Use the drm_driver.dumb_destroy default
drm/ast: Use the drm_driver.dumb_destroy default
drm/qxl: Use the drm_driver.dumb_destroy default
drm/udl: Use the drm_driver.dumb_destroy default
drm/cirrus: Use the drm_driver.dumb_destroy default
drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults
drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults
drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults
drm/meson: Use .dumb_map_offset and .dumb_destroy defaults
drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults
drm/vc4: Continue the switch to drm_*_put() helpers
drm/vc4: Fix leak of HDMI EDID
dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2
dma-buf: add reservation_object_copy_fences (v2)
drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD
...
The function st7586_pipe_enable is local to the source
and does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'st7586_pipe_enable' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: David Lechner <david@lechnology.com>
[noralf: fixed: Alignment should match open parenthesis]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816092306.10969-1-colin.king@canonical.com
This library provides helpers for drivers that don't subclass
drm_framebuffer and are backed by drm_gem_object. The code is
taken from drm_fb_cma_helper.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy()
which is the drm_driver.dumb_destroy default, so no need to set it.
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-19-git-send-email-noralf@tronnes.org
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and
remove exynos_drm_gem_dumb_map_offset().
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-14-git-send-email-noralf@tronnes.org
This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-2-git-send-email-noralf@tronnes.org
Otherwise it reuses the ilk that has a completely different
wm.
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809205248.11917-6-rodrigo.vivi@intel.com
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently
made some bad decisions that changed the logic of the
code. (Noticed by Manesh, updated by Rodrigo).
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811233825.32083-1-rodrigo.vivi@intel.com
When LSPCON support was extended to CNL
one part was missed on lspcon_init.
So, instead of adding check per platform on lspcon_init
let's use HAS_LSPCON that is already there for that
purpose.
Fixes: ff15947e0f ("drm/i915/cnl: LSPCON support is gen9+")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816030403.11368-1-rodrigo.vivi@intel.com
Ever since we've parsed VBT child devices, starting from 6acab15a7b
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.
Since commit 311a20949f ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.
Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.
Finally, when commit bb1d132935 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.
Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.
Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233
Fixes: bb1d132935 ("drm/i915/vbt: split out defaults that are set when there is no VBT")
Tested-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Didier G <didierg-divers@orange.fr>
Reported-by: Giles Anderson <agander@gmail.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811113907.6716-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the kmalloc() fails then we dereference "state" when we set
"state->zpos".
Fixes: 3dfeb631a1 ("drm/omap: Rework the rotation-on-crtc hack")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The driver sets crtc and plane rotation properties back to 0 degrees in
dev_lastclose() using drm_object_property_set_value().
drm_object_property_set_value() doesn't do anything with atomic drivers,
and a recent change added WARN_ON() when atomic driver calls the
function.
So remove the code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Now that creating the omapdrm device from the platform code has been
removed, we can rename the omapdrm device back to "omapdrm".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdss driver (not to be confused with the omapdss_dss driver) is
now a dummy driver with empty probe and remove functions. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm platform device is a virtual device created for the sole
purpose of handling the omapdss/omapdrm driver split. It should
eventually be removed. As a first step to ease refactoring move its
registration from platform code to driver code.
The omapdrm driver name must be changed internally to avoid probing both
the device registered in platform code and the device registered in the
omapdss driver, as that would otherwise break bisection.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
There's no need to allocate memory dynamically to duplicate the contents
of a const structure, only to store the memory pointer in a const
pointer field. Just use the original structures directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tobias Jakobi