Commit Graph

32 Commits

Author SHA1 Message Date
Patrice Chotard f932423c6f dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry
STM32F769 SoC provides 2 SDMMC instances, add missing
RCC SDMMC2 entry for it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2018-03-05 09:04:25 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Gabriel Fernandez 3e4d618b07 clk: stm32h7: Add stm32h743 clock driver
This patch enables clocks for STM32H743 boards.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>

for MFD changes:
Acked-by: Lee Jones <lee.jones@linaro.org>

for DT-Bindings
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-31 18:35:47 -07:00
Gabriel Fernandez 156fdf11ae dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
This patch lists STM32F7's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-23 18:18:36 +01:00
Arnd Bergmann 4b5f4835d1 STM32 DT updates for v4.11, round 2.
Highlights:
 ----------
 
  - ADD Timers support on STM32F429 MCU
  - Enable PWM1 & PWM3 on STM32F469 Disco board
  - Fix STM32F4_X_CLOCK macro
  - Use STM32F4_X_CLOCK macro in STM32 device tree
  - Add I2C1 support for STM32F429 MCU
  - Enable I2C1 on STM32F429 eval board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYkhq5AAoJEH+ayWryHnCFQ8oQALI6/JlNe/MouLxT+bb1xyUz
 l7nYidN5FpvkVrNgsw4iAs4fBm7QkM99/Em4KHjQJJzWDIJJ3XFr+ofyKh47vxrB
 DrmUkauFs/Zl0oo2QoLjkIa6mqCVTJG3HQuwYIpvLgsbr57sNUqlzOJTzz72TCD9
 xwiOxgZdRVthFrUzy/5RKWls1zs7acQ+1B2y8XnlTJLNw5PY3v1FVXW0n+VtUwBf
 /VskY70E76SZTRWMRSzl5AtVyNoCqmdxE/Xk2ZQlD6dBnZ04sUGUXbwe3JFkF5Ow
 tSuTU6DSdka4Ep0o35bGdcmErXK2CNoBpgNuNeCtVnWKLieb9l7ucHH9s6Q7V9c1
 76690DqyRA3JjCH86HULZ3AvfOA6T0Uea8fEJ5bSnwJPXnAcqG0J4NzOA+YWuVLP
 Sk9UPq2zCRVlcmQb/5eYe8t+fGVQQCrYwrDCGbaGyWxfKvRYZ5+YSrHvd4quOyS3
 OK3Ia8sIBVf4gduylvwqfDRNGxzNcqECBpGflbDpS7eLRehEGWxPi9jgFuNmr5C4
 8R41zL22xksIs7fu5N/duyGW10SQLeRNDstcnWcGeCqKwDwNvsf3FCqwuyY7blaa
 NFlgLwSN5qtqhBI6e5hkNusKuZWY84QjXtQda4Y/veEtOWsEgrSNsAYbJ63lw2jH
 tVW6g/+UZo1iTzwKDIbt
 =1AIE
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

Pull "STM32 DT updates for v4.11, round 2" from Alexandre Torgue:

Highlights:
----------

 - ADD Timers support on STM32F429 MCU
 - Enable PWM1 & PWM3 on STM32F469 Disco board
 - Fix STM32F4_X_CLOCK macro
 - Use STM32F4_X_CLOCK macro in STM32 device tree
 - Add I2C1 support for STM32F429 MCU
 - Enable I2C1 on STM32F429 eval board

* tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
2017-02-07 15:25:19 +01:00
Gabriel Fernandez 2cfb397b15 dt-bindings: mfd: stm32f4: Add missing binding definition
This patch adds missing binding definition (backupram, ethernet, otg,
qspi, adc & dsi)

Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01 17:01:36 +01:00
Gabriel Fernandez 982b159297 dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
Macro to select a clock was not correct.

Offset of enable register starts at 0x30, then calculation to select a bit is:
(@enable_reg - 0x30) / 4 * 32 + bit_to_select

Tested-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-02-01 17:01:33 +01:00
Milo Kim be53e38f0d dt-bindings: mfd: Remove TPS65217 interrupts
Interrupt numbers are from the datasheet, so no need to keep them in
the ABI. Use the number in the DT file.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27 10:06:00 -08:00
Milo Kim 98af595804 dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
TPS65217 supports three interrupt sources. This patch enables assigning
each IRQ number in the charger and power button node. Then corresponding
IRQ will be requested by each driver.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-09 14:31:43 -07:00
Linus Torvalds 6afd563d4b ARM: SoC driver updates for v4.9
Driver updates for ARM SoCs, including a couple of newly added drivers:
 
 - The Qualcomm external bus interface 2 (EBI2), used in some of their
   mobile phone chips for connecting flash memory, LCD displays or
   other peripherals
 
 - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the
   EFUSE based on that firmware interface.
 
 - Perf support for the AppliedMicro X-Gene performance monitor unit
 
 - Reset driver for STMicroelectronics STM32
 
 - Reset driver for SocioNext UniPhier SoCs
 
 Aside from these, there are minor updates to SoC-specific bus,
 clocksource, firmware, pinctrl, reset, rtc and pmic drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gaimCrR//JCVInAQJaOQ/6A++YfLVmdF4wxgcu/0ti28lA7SkQIGJV
 UAsfCmqMEutbeDvnloVGmTV2K2NS7mzxdxsJGbVB7Oe/zdOFN+T9sf9hAlId01QA
 oVkoagpofoxlyKoKJ/l+heuEEZMa0Ekk3XXRTGv/Ovymo7252o4tEdGu9c+gyaMJ
 KqgixcrQRzxuWDgPpHUPUez2vY1iRMvvdcb0EmfiHcIgPOEJc6MIxulsqEIrkoMz
 WYeGFIeqRJxnrur3QD8WnD+aZD6bV01wkFTkWXGWg4H87QfEESgVBu5A7TL+5sL8
 1SlX/b7S5/ZJbrOiOS2IUyvbK7NiA/Q+NunHW2rMVnUWuEvJ9HAQB1kVSQH5LIYO
 6OBokjcijm6m/j6O6fdDfvNd6PLsIEUqfWVws7O+uofMMqKPxqak4VBTRdFM+aeF
 ZtK7mEbzteCX0bnC+XblZrseAlkIehYnP80CLDbtDTerTWP4gsjxGVt3U6MO0NzB
 K0ACWZOclzrcFscNKrmP6uPCpfZriiPV/XMCEHcylA/X2iYsVmpqKzdLuNs5aeUr
 uPzQbNWu9ygg/bDRXMYY2E3Kzjsc0eIOKEOPyhLaZdSo4e1FQxud6L2V2Vj0RLB/
 iMA7/CyQZqn6Yzgs0VMZm/bnh+hIdHioGFl5K5j6Fcw9VZRkNmnEQJzX4VU5efGO
 g1+5av0vFXg=
 =GvTq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - The Qualcomm external bus interface 2 (EBI2), used in some of their
     mobile phone chips for connecting flash memory, LCD displays or
     other peripherals

   - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for
     the EFUSE based on that firmware interface.

   - Perf support for the AppliedMicro X-Gene performance monitor unit

   - Reset driver for STMicroelectronics STM32

   - Reset driver for SocioNext UniPhier SoCs

  Aside from these, there are minor updates to SoC-specific bus,
  clocksource, firmware, pinctrl, reset, rtc and pmic drivers"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  bus: qcom-ebi2: depend on HAS_IOMEM
  pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181
  clk: mvebu: Add clk support for the orion5x SoC mv88f5181
  dt-bindings: EXYNOS: Add Exynos5433 PMU compatible
  clocksource: exynos_mct: Add the support for ARM64
  perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver
  Documentation: Add documentation for APM X-Gene SoC PMU DTS binding
  MAINTAINERS: Add entry for APM X-Gene SoC PMU driver
  bus: qcom: add EBI2 driver
  bus: qcom: add EBI2 device tree bindings
  rtc: rtc-pm8xxx: Add support for pm8018 rtc
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  firmware: Amlogic: Add secure monitor driver
  soc: qcom: smd: Reset rx tail rather than tx
  memory: atmel-sdramc: fix a possible NULL dereference
  reset: hi6220: allow to compile test driver on other architectures
  reset: zynq: add driver Kconfig option
  reset: sunxi: add driver Kconfig option
  reset: stm32: add driver Kconfig option
  reset: socfpga: add driver Kconfig option
  ...
2016-10-07 21:23:40 -07:00
Neil Armstrong eb87a669dd mfd: qcom-rpm: Add support for pm8018 RPM Regulator
In order to support the Qualcomm MDM9615 SoC, add support for the
RPM regulator entries in the qcom-rpm driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 09:33:43 +01:00
Maxime Coquelin ca9f71f057 dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include file
Ths patch lists STM32F4's RCC numeric constants.
It will be used by clock and reset drivers, and DT bindings.

Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24 15:21:26 +02:00
Laxman Dewangan e5e3dea890 mfd: Add device-tree binding doc for PMIC MAX77620/MAX20024
The MAXIM PMIC MAX77620 and MAX20024 are power management IC
which supports RTC, GPIO, DCDC/LDO regulators, interrupt,
watchdog etc.

Add DT binding document for the different functionality of
this device.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 15:42:08 +01:00
Charles Keepax 37ac9c9029 mfd: arizona: Add defines for GPSW values that can be used from DT
Add defines for the possible values the GPSW can be set to using the
wlf,gpsw device tree binding.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09 15:41:56 +01:00
Ashley Towns 0b4663a1f4 dt-bindings: fixes some incorrect header guards
in dt-bindings where the preprocessor #ifndef/#define
variables were mismatched.

Signed-off-by: Ashley Towns <mail@ashleytowns.id.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-08 15:06:54 +01:00
Cyrille Pitchen 8343284d61 mfd: atmel-flexcom: Create include file with macros used by DT bindings
This patch defines some macros to be used as value for the
"atmel,flexcom-mode" DT property. This value is then written into
the Operating Mode (OPMODE) bit field of the Flexcom Mode Register.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-10-30 17:19:47 +00:00
Charles Keepax e76e397a7f mfd: arizona: Add registers for ADC microphone detection
The newer devices support using a software comparison to determine
whether a 3/4 pole jack is present. Add the registers necessary for
this.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-09-22 15:23:59 +09:00
Lee Jones 6f2536141c mfd: dt-bindings: Provide human readable define for Clocksource mode
ST's Low Power Controller can now operate in three supported modes;
Watchdog, Real Time Clock and most recently as a Clocksource.  This new
define will allow the LPC IP to be configured for Clocksource from DT.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-07-23 11:34:25 +01:00
Linus Torvalds d87823813f Char/Misc driver patches for 4.2-rc1
Here's the big char/misc driver pull request for 4.2-rc1.
 
 Lots of mei, extcon, coresight, uio, mic, and other driver updates in
 here.  Full details in the shortlog.  All of these have been in
 linux-next for some time with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlWNn0gACgkQMUfUDdst+ykCCQCgvdF4F2+Hy9+RATdk22ak1uq1
 JDMAoJTf4oyaIEdaiOKfEIWg9MasS42B
 =H5wD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver pull request for 4.2-rc1.

  Lots of mei, extcon, coresight, uio, mic, and other driver updates in
  here.  Full details in the shortlog.  All of these have been in
  linux-next for some time with no reported problems"

* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
  mei: me: wait for power gating exit confirmation
  mei: reset flow control on the last client disconnection
  MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
  misc: sram: sort and clean up included headers
  misc: sram: move reserved block logic out of probe function
  misc: sram: add private struct device and virt_base members
  misc: sram: report correct SRAM pool size
  misc: sram: bump error message level on unclean driver unbinding
  misc: sram: fix device node reference leak on error
  misc: sram: fix enabled clock leak on error path
  misc: mic: Fix reported static checker warning
  misc: mic: Fix randconfig build error by including errno.h
  uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
  uio: pruss: Add CONFIG_HAS_IOMEM dependence
  uio: pruss: Include <linux/sizes.h>
  extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
  char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
  Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
  parport: check exclusive access before register
  w1: use correct lock on error in w1_seq_show()
  ...
2015-06-26 14:51:15 -07:00
Charles Keepax 056c3e751e mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-06-22 12:25:22 +01:00
Inha Song 9e86b2ad4c extcon: arizona: Add support for select accessory detect mode when headphone detection
This patch add support for select accessory detect mode to HPDETL or HPDETR.
Arizona provides a headphone detection circuit on the HPDETL and HPDETR pins
to measure the impedance of an external load connected to the headphone.

Depending on board design, headphone detect pins can change to HPDETR or HPDETL.

Signed-off-by: Inha Song <ideal.song@samsung.com>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-05-19 16:39:05 +09:00
Lee Jones 0b30d25d08 mfd: dt-bindings: Provide human readable defines for LPC mode choosing
ST's Low Power Controller can currently operate in two supported modes;
Watchdog and Real Time Clock.  These defines will aid engineers to easily
identify the selected mode.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-04-30 11:43:09 +01:00
Josh Cartwright 30bc3aa5c4 mfd: devicetree: qcom_rpm: Document IPQ8064 resources
The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick
clock and four regulator resources.  Provide definitions for them.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Drop regulator part of binding]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 08:19:57 +01:00
Charles Keepax 4901033629 mfd: arizona: Move useful defines into a dt-binding include
Move parts of linux/mfd/arizona/pdata.h and gpio.h into a new file in
the dt-binding directory for use by device tree bindings. This also
makes gpio.h redundant so remove it in the process.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-03 16:41:24 +00:00
Bjorn Andersson aa0c4b8150 mfd: devicetree: bindings: Add Qualcomm RPM DT binding
Add binding for the Qualcomm Resource Power Manager (RPM) found in 8660,
8960 and 8064 based devices.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-01-22 16:03:57 +00:00
Linus Torvalds 54c72d5987 == Changes to existing drivers ==
- Checkpatch fixes throughout the subsystem
   - Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
   - Use DMA in rtsx_pcr
   - Restrict building on unsupported architectures on timberdale, cs5535
   - SPI hardening in cros_ec_spi
   - More robust error handing in asic3, cros_ec, ab8500-debugfs,
         max77686 and pcf50633-core
   - Reorder PM runtime and regulator handing during shutdown in arizona
   - Enable wakeup in cros_ec_spi
   - Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
         tps65912-spi, wm5110-tables and ab8500-debugfs
   - Add regulator handing into suspend() in sec-core
   - Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
   - Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
         max77686 and tps65910
   - Device Tree documentation updates throughout
   - Provide power management support in max77686
   - Few OF clean-ups in max77686
   - Use manged resources in tps6105x
 
  == New drivers/supported devices ==
   - Add support for s2mpu02 to sec-core
   - Add support for Allwinner A32 to sun6i-prcm
   - Add support for Maxim 77802 in max77686
   - Add support for DA9063 AD in da9063
   - Add new driver for Intel PMICs (generic) and specifically Crystal Cove
 
  == (Re-)moved drivers ==
   - Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT40p7AAoJEFGvii+H/HdhTo0P/1GuZyvCAJCeqt2oN1gcloIe
 Hgf5rEo/PVPh3T9vHA7GCbWhgtdxfJI8FxrQYvU7Dw5cEMlmvl5p/ZHNPIProv97
 uI59JO67roLpXZP+aYX8BzXcplYkaR/ah16o/ePtaOCwGrXDz+TtJiHEVVN/8bAG
 PWsdcDNBC8byP7BZ/8zFdu6pX4800eRZ0KgeBH+u4k6UDor7M6LkQrxF1hJhU1Bv
 z14Q2wKQufhbcyEtQWcYc6M8hignD1Ioyd4I8mnEJs0EUiABfGUEk/K/G4Z5Q7Sv
 eRIEPZCd1CEBKD5JQcPXyE1QGdG9GiD15PLmctPA4VY1V+9c5/Hoq0TLoxlAQNWA
 gUr7WSqJ+KT2Nch0WVr/MdP8l0jPYfboWbsd/apj4GK0/9quwJNkGUxx0mCdCXyg
 9ylitwUrmlrd4CEKjybfEuTQB52Jvcdq24fnNYHHn1TGppZH6w7LVvdwSW7UcjF0
 Y48hTImYYnVAlWl5lE5xVQTWD/3hseAcoWTsdSORSWJbkCfAhJUg/Gn5bH/Fkwhs
 /aWYPvkF+m47PoudZ9Z8qB5OTO4uz/Q9uEBBf2/k4Yy95vl2IZdy9VqS5tYG67e7
 LLdAZvG5hjEwDi3OwcwGSdZ/kRB5Hgq/YvpqjItle86CKj0ECdAqL/PfqLISgJq9
 x3zSuWMRLcNoyhc2HnBj
 =2cNI
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD update from Lee Jones:
 "Changes to existing drivers:
   - checkpatch fixes throughout the subsystem
   - use Regmap to handle IRQs in max77686, extcon-max77693 and
     mc13xxx-core
   - use DMA in rtsx_pcr
   - restrict building on unsupported architectures on timberdale,
     cs5535
   - SPI hardening in cros_ec_spi
   - more robust error handing in asic3, cros_ec, ab8500-debugfs,
     max77686 and pcf50633-core
   - reorder PM runtime and regulator handing during shutdown in arizona
   - enable wakeup in cros_ec_spi
   - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
     tps65912-spi, wm5110-tables and ab8500-debugfs
   - add regulator handing into suspend() in sec-core
   - remove pointless wrapper functions in extcon-max77693 and
     i2c-cros-ec-tunnel
   - use cross-architecture friendly data sizes in stmpe-i2c, arizona,
     max77686 and tps65910
   - devicetree documentation updates throughout
   - provide power management support in max77686
   - few OF clean-ups in max77686
   - use manged resources in tps6105x

  New drivers/supported devices:
   - add support for s2mpu02 to sec-core
   - add support for Allwinner A32 to sun6i-prcm
   - add support for Maxim 77802 in max77686
   - add support for DA9063 AD in da9063
   - new driver for Intel PMICs (generic) and specifically Crystal Cove

  (Re-)moved drivers ==
   - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"

* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
  MAINTAINERS: Update MFD repo location
  mfd: omap-usb-host: Fix improper mask use.
  mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
  mfd: arizona: Add missing handling for ISRC3 under/overclocked
  mfd: wm5110: Add new interrupt register definitions
  mfd: arizona: Rename thermal shutdown interrupt
  mfd: wm5110: Add in the output done interrupts
  mfd: wm5110: Remove non-existant interrupts
  mfd: tps65912-spi: Remove unused variable
  mfd: htc-i2cpld: Remove unused code
  mfd: da9063: Add support for AD silicon variant
  mfd: arizona: Map MICVDD from extcon device to the Arizona core
  mfd: arizona: Add MICVDD to mapped regulators for wm8997
  mfd: max77686: Ensure device type IDs are architecture agnostic
  mfd: max77686: Add Maxim 77802 PMIC support
  mfd: tps6105x: Use managed resources when allocating memory
  mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
  mfd: kempld-core: Correct a variety of checkpatch warnings
  mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
  mfd: si476x-cmd: Remedy checkpatch style complains
  ...
2014-08-07 17:17:39 -07:00
Laxman Dewangan 7811a989fc dt-binding: mfd: as3722: Correct macro name
The macro name for enable3 pin is named as AS3722_EXT_CONTROL_PIN_ENABLE2
which is conflict with the enable2 pin.

Correct this macro name to correctly reflect the enable pin i.e.
AS3722_EXT_CONTROL_PIN_ENABLE3.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reported-by: Dan Willemsen <dwillemsen@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09 14:58:05 +01:00
Peter Ujfalusi 5974b794cb dt/bindings: Binding documentation for Palmas clk32kg and clk32kgaudio clocks
Palmas class of devices can provide 32K clock(s) to be used by other devices
on the board. Depending on the actual device the provided clocks can be:
CLK32K_KG and CLK32K_KGAUDIO
or only one:
CLK32K_KG (TPS659039 for example)

Use separate compatible flags for the two 32K clock.
A system which needs or have only one of the 32k clock from
Palmas will need to add node(s) for each clock as separate section
in the dts file.
The two compatible property is:
"ti,palmas-clk32kg" for clk32kg clock
"ti,palmas-clk32kgaudio" for clk32kgaudio clock

Apart from the register control of the clocks - which is done via
the clock API there is a posibility to enable the external sleep
control. In this way the clock can be enabled/disabled on demand by the
user of the clock.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01 21:37:57 -07:00
Linus Torvalds db0b2d0116 For the 3.13 merge window we have a couple of new drivers for the AMS
AS3722 PMIC and for STMicroelectronics STw481x PMIC.
 
 Although this is a smaller update than usual, we also have:
 
 - Device tree support for the max77693 driver.
 
 - linux/of.h inclusion for all DT compatible MFD drivers, to avoid build
   breakage in the future.
 
 - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver.
 
 - A small arizona update for new wm5110 DSP registers and a few fixes.
 
 - A small palmas update as well, including an of_device table addition
   and a few minor fixes.
 
 - Two small mfd-core changes, one including a memory leak fix for when
   mfd_add_device() fails.
 
 - Our usual round of minor cleanups and janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJShjufAAoJEIqAPN1PVmxKRoEP/jKe0UgrNA6G4xHSPX1Xcktc
 /kaQdcwJcTTHMpkIyQPFayItCcBPyb8bN1SdrQs4sds4ut7xyjve2uHz0KpZI6JO
 F+Rh6UVNkUIbcEx3jfh0DDv3pHv0vryFPnerkOIr0TFmSF1Tj29dRORQzpEqZ2fZ
 rstxmxNTG0ggP0Ug4ivv/YWjhGmO9CvKePJzQyImrC8QWCRDiARu072bG8xhVyHZ
 PkJTzJr2kjkI3whIY7Z04Nx90AtpikM4G27JiCwsHyv4vCCOtTtC9lRYb/IBUHWJ
 UhJiPvTygsU63opGOyAodR9LJxta0UCWm2Qn71ZuBAJmQ4oFxdZ7iVkWePjeSF5U
 2Jx9dUi1UWJQNCSB8HEpaUExybXdsNTwnSw8NIb6Gg2kygClj5KvzPMwz3ZHRKU/
 Ef1TGpWTeuok0zOijhBDUqAhq4KQv/H9Xjbm8FIMSBVGQgRBT3dkYTRZv30deeg/
 SIzoJGg7QiMDwlu/33k7aX7aIwJA2r6st/Q3OUKp/aBVqd6i24rL5+ZMykqcx5HJ
 x9GnvjrHgz+nAgF2yU6KQT1FrX1IQEM4F1tgMtroXQcCAGgoWoJRjW82gQqp6NE+
 eVbvsE56z2MiSNbiYUL4hdC03b/z8LbzP1zEt95Xc+sOf7NewMHYln7XkByBxrPH
 tlR20ZV44W25s7DYg7xh
 =nQ/p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD updates from Samuel Ortiz:
 "For the 3.13 merge window we have a couple of new drivers for the AMS
  AS3722 PMIC and for STMicroelectronics STw481x PMIC.

  Although this is a smaller update than usual, we also have:

   - Device tree support for the max77693 driver

   - linux/of.h inclusion for all DT compatible MFD drivers, to avoid
     build breakage in the future

   - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver

   - A small arizona update for new wm5110 DSP registers and a few fixes

   - A small palmas update as well, including an of_device table
     addition and a few minor fixes

   - Two small mfd-core changes, one including a memory leak fix for
     when mfd_add_device() fails

   - Our usual round of minor cleanups and janitorial fixes"

* tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits)
  Documentation: mfd: Update s2mps11.txt
  mfd: pm8921: Potential NULL dereference in pm8921_remove()
  mfd: Fix memory leak in mfd_add_devices()
  mfd: Stop setting refcounting pointers in original mfd_cell arrays
  mfd: wm5110: Enable micd clamp functionality
  mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH
  mfd: max77693: Fix up bug of wrong interrupt number
  mfd: as3722: Don't export the regmap config
  mfd: twl6040: Remove obsolete cleanup for i2c clientdata
  mfd: tps65910: Remove warning during dt node parsing
  mfd: lpc_sch: Ignore resource conflicts when adding mfd cells
  mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock
  mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled
  mfd: Add support for ams AS3722 PMIC
  mfd: max77693: Include linux/of.h header
  mfd: tc3589x: Detect the precise version
  mfd: omap-usb: prepare/unprepare clock while enable/disable
  mfd: max77686: Include linux/of.h header
  mfd: max8907: Include linux/of.h header
  mfd: max8997: Include linux/of.h header
  ...
2013-11-15 16:37:40 -08:00
Laxman Dewangan d460a6f3d6 mfd: Add support for ams AS3722 PMIC
The ams AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
controller, 11 LDOs, RTC, automatic battery, temperature and
over-current monitoring, 8 GPIOs, ADC and a watchdog.

Add MFD core driver for the AS3722 to support core functionality.

Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-10-23 16:22:33 +01:00
Lee Jones 58092dc4df mfd: dbx500: Remove any mention of the BML8580CLK
The platform which it pertains to is no longer supported and is actually
causing some confusion in the new common clock implementation. A recent
patch removed its use in the clock driver, let's take out the definitions
too.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:04:16 +02:00
Lee Jones 67f13daadc mfd: dbx500-prcmu: Move PRCMU numerical clock identifiers into DT include file
These are required to request DBx500 PRCMU clocks from Device Tree. The
numbers used are taken directly from the Hardware Specification document.
We're moving them from the DBx500 PRCMU include file into the DT include
directory and referencing them from the former via a #include.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-26 11:04:12 +02:00