Chester reports that it is necessary to introduce a new way to pass
the EFI secure boot status between the EFI stub and the core kernel
on ARM systems. The usual way of obtaining this information is by
checking the SecureBoot and SetupMode EFI variables, but this can
only be done after the EFI variable workqueue is created, which
occurs in a subsys_initcall(), whereas arch_ima_get_secureboot()
is called much earlier by the IMA framework.
However, the IMA framework itself is started as a late_initcall,
and the only reason the call to arch_ima_get_secureboot() occurs
so early is because it happens in the context of a __setup()
callback that parses the ima_appraise= command line parameter.
So let's refactor this code a little bit, by using a core_param()
callback to capture the command line argument, and deferring any
reasoning based on its contents to the IMA init routine.
Cc: Chester Lin <clin@suse.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200904072905.25332-2-clin@suse.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: kernel test robot <lkp@intel.com> [missing core_param()]
[zohar@linux.ibm.com: included linux/module.h]
Tested-by: Chester Lin <clin@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=qyUG
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Continuing IMA policy rule cleanup and validation in particular for
measuring keys, adding/removing/updating informational and error
messages (e.g. "ima_appraise" boot command line option), and other bug
fixes (e.g. minimal data size validation before use, return code and
NULL pointer checking)"
* tag 'integrity-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix NULL pointer dereference in ima_file_hash
evm: Check size of security.evm before using it
ima: Remove semicolon at the end of ima_get_binary_runtime_size()
ima: Don't ignore errors from crypto_shash_update()
ima: Use kmemdup rather than kmalloc+memcpy
integrity: include keyring name for unknown key request
ima: limit secure boot feedback scope for appraise
integrity: invalid kernel parameters feedback
ima: add check for enforced appraise option
integrity: Use current_uid() in integrity_audit_message()
ima: Fail rule parsing when asymmetric key measurement isn't supportable
ima: Pre-parse the list of keyrings in a KEY_CHECK rule
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
- Preliminary RISC-V enablement - the bulk of it will arrive via the RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config table
rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot#### variable
contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we can
identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available but
returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZNI8
-----END PGP SIGNATURE-----
Merge tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
- Preliminary RISC-V enablement - the bulk of it will arrive via the
RISCV tree.
- Relax decompressed image placement rules for 32-bit ARM
- Add support for passing MOK certificate table contents via a config
table rather than a EFI variable.
- Add support for 18 bit DIMM row IDs in the CPER records.
- Work around broken Dell firmware that passes the entire Boot####
variable contents as the command line
- Add definition of the EFI_MEMORY_CPU_CRYPTO memory attribute so we
can identify it in the memory map listings.
- Don't abort the boot on arm64 if the EFI RNG protocol is available
but returns with an error
- Replace slashes with exclamation marks in efivarfs file names
- Split efi-pstore from the deprecated efivars sysfs code, so we can
disable the latter on !x86.
- Misc fixes, cleanups and updates.
* tag 'efi-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
efi: mokvar: add missing include of asm/early_ioremap.h
efi: efivars: limit availability to X86 builds
efi: remove some false dependencies on CONFIG_EFI_VARS
efi: gsmi: fix false dependency on CONFIG_EFI_VARS
efi: efivars: un-export efivars_sysfs_init()
efi: pstore: move workqueue handling out of efivars
efi: pstore: disentangle from deprecated efivars module
efi: mokvar-table: fix some issues in new code
efi/arm64: libstub: Deal gracefully with EFI_RNG_PROTOCOL failure
efivarfs: Replace invalid slashes with exclamation marks in dentries.
efi: Delete deprecated parameter comments
efi/libstub: Fix missing-prototypes in string.c
efi: Add definition of EFI_MEMORY_CPU_CRYPTO and ability to report it
cper,edac,efi: Memory Error Record: bank group/address and chip id
edac,ghes,cper: Add Row Extension to Memory Error Record
efi/x86: Add a quirk to support command line arguments on Dell EFI firmware
efi/libstub: Add efi_warn and *_once logging helpers
integrity: Load certs from the EFI MOK config table
integrity: Move import of MokListRT certs to a separate routine
efi: Support for MOK variable config table
...
To perform partial reads, callers of kernel_read_file*() must have a
non-NULL file_size argument and a preallocated buffer. The new "offset"
argument can then be used to seek to specific locations in the file to
fill the buffer to, at most, "buf_size" per call.
Where possible, the LSM hooks can report whether a full file has been
read or not so that the contents can be reasoned about.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201002173828.2099543-14-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the kernel_read_file LSM hook is called with contents=false, IMA
can appraise the file directly, without requiring a filled buffer. When
such a buffer is available, though, IMA can continue to use it instead
of forcing a double read here.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/lkml/20200706232309.12010-10-scott.branden@broadcom.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-13-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As with the kernel_load_data LSM hook, add a "contents" flag to the
kernel_read_file LSM hook that indicates whether the LSM can expect
a matching call to the kernel_post_read_file LSM hook with the full
contents of the file. With the coming addition of partial file read
support for kernel_read_file*() API, the LSM will no longer be able
to always see the entire contents of a file during the read calls.
For cases where the LSM must read examine the complete file contents,
it will need to do so on its own every time the kernel_read_file
hook is called with contents=false (or reject such cases). Adjust all
existing LSMs to retain existing behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that security_post_load_data() is wired up, use it instead
of the NULL file argument style of security_post_read_file(),
and update the security_kernel_load_data() call to indicate that a
security_kernel_post_load_data() call is expected.
Wire up the IMA check to match earlier logic. Perhaps a generalized
change to ima_post_load_data() might look something like this:
return process_buffer_measurement(buf, size,
kernel_load_data_id_str(load_id),
read_idmap[load_id] ?: FILE_CHECK,
0, NULL);
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-10-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().
Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)
Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.
With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.
Additionally prepare IMA to start processing these cases.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for adding partial read support, add an optional output
argument to kernel_read_file*() that reports the file size so callers
can reason more easily about their reading progress.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-8-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for further refactoring of kernel_read_file*(), rename
the "max_size" argument to the more accurate "buf_size", and correct
its type to size_t. Add kerndoc to explain the specifics of how the
arguments will be used. Note that with buf_size now size_t, it can no
longer be negative (and was never called with a negative value). Adjust
callers to use it as a "maximum size" when *buf is NULL.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-7-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for refactoring kernel_read_file*(), remove the redundant
"size" argument which is not needed: it can be included in the return
code, with callers adjusted. (VFS reads already cannot be larger than
INT_MAX.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-6-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h
include file. That header gets pulled in just about everywhere
and doesn't really need functions not related to the general fs interface.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com
Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FIRMWARE_PREALLOC_BUFFER is a "how", not a "what", and confuses the LSMs
that are interested in filtering between types of things. The "how"
should be an internal detail made uninteresting to the LSMs.
Fixes: a098ecd2fa ("firmware: support loading into a pre-allocated buffer")
Fixes: fd90bc559b ("ima: based on policy verify firmware signatures (pre-allocated buffer)")
Fixes: 4f0496d8ff ("ima: based on policy warn about loading firmware (pre-allocated buffer)")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201002173828.2099543-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ima_file_hash can be called when there is no iint->ima_hash available
even though the inode exists in the integrity cache. It is fairly
common for a file to not have a hash. (e.g. an mknodat, prior to the
file being closed).
Another example where this can happen (suggested by Jann Horn):
Process A does:
while(1) {
unlink("/tmp/imafoo");
fd = open("/tmp/imafoo", O_RDWR|O_CREAT|O_TRUNC, 0700);
if (fd == -1) {
perror("open");
continue;
}
write(fd, "A", 1);
close(fd);
}
and Process B does:
while (1) {
int fd = open("/tmp/imafoo", O_RDONLY);
if (fd == -1)
continue;
char *mapping = mmap(NULL, 0x1000, PROT_READ|PROT_EXEC,
MAP_PRIVATE, fd, 0);
if (mapping != MAP_FAILED)
munmap(mapping, 0x1000);
close(fd);
}
Due to the race to get the iint->mutex between ima_file_hash and
process_measurement iint->ima_hash could still be NULL.
Fixes: 6beea7afcc ("ima: add the ability to query the cached hash of a given file")
Signed-off-by: KP Singh <kpsingh@google.com>
Reviewed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Because of system-specific EFI firmware limitations, EFI volatile
variables may not be capable of holding the required contents of
the Machine Owner Key (MOK) certificate store when the certificate
list grows above some size. Therefore, an EFI boot loader may pass
the MOK certs via a EFI configuration table created specifically for
this purpose to avoid this firmware limitation.
An EFI configuration table is a much more primitive mechanism
compared to EFI variables and is well suited for one-way passage
of static information from a pre-OS environment to the kernel.
This patch adds the support to load certs from the MokListRT
entry in the MOK variable configuration table, if it's present.
The pre-existing support to load certs from the MokListRT EFI
variable remains and is used if the EFI MOK configuration table
isn't present or can't be successfully used.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Link: https://lore.kernel.org/r/20200905013107.10457-4-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Move the loading of certs from the UEFI MokListRT into a separate
routine to facilitate additional MokList functionality.
There is no visible functional change as a result of this patch.
Although the UEFI dbx certs are now loaded before the MokList certs,
they are loaded onto different key rings. So the order of the keys
on their respective key rings is the same.
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20200905013107.10457-3-lszubowi@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This patch checks the size for the EVM_IMA_XATTR_DIGSIG and
EVM_XATTR_PORTABLE_DIGSIG types to ensure that the algorithm is read from
the buffer returned by vfs_getxattr_alloc().
Cc: stable@vger.kernel.org # 4.19.x
Fixes: 5feeb61183 ("evm: Allow non-SHA1 digital signatures")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch removes the unnecessary semicolon at the end of
ima_get_binary_runtime_size().
Cc: stable@vger.kernel.org
Fixes: d158847ae8 ("ima: maintain memory size needed for serializing the measurement list")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Errors returned by crypto_shash_update() are not checked in
ima_calc_boot_aggregate_tfm() and thus can be overwritten at the next
iteration of the loop. This patch adds a check after calling
crypto_shash_update() and returns immediately if the result is not zero.
Cc: stable@vger.kernel.org
Fixes: 3323eec921 ("integrity: IMA as an integrity service provider")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Depending on the IMA policy rule a key may be searched for in multiple
keyrings (e.g. .ima and .platform) and possibly not found. This patch
improves feedback by including the keyring "description" (name) in the
error message.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
[zohar@linux.ibm.com: updated commit message]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Only emit an unknown/invalid message when setting the IMA appraise mode
to anything other than "enforce", when secureboot is enabled.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
[zohar@linux.ibm.com: updated commit message]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The "enforce" string is allowed as an option for ima_appraise= kernel
paramenter per kernel-paramenters.txt and should be considered on the
parameter setup checking as a matter of completeness. Also it allows futher
checking on the options being passed by the user.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measuring keys is currently only supported for asymmetric keys. In the
future, this might change.
For now, the "func=KEY_CHECK" and "keyrings=" options are only
appropriate when CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS is enabled. Make
this clear at policy load so that IMA policy authors don't assume that
these policy language constructs are supported.
Fixes: 2b60c0eced ("IMA: Read keyrings= option from the IMA policy")
Fixes: 5808611ccc ("IMA: Add KEY_CHECK func to measure keys")
Suggested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The ima_keyrings buffer was used as a work buffer for strsep()-based
parsing of the "keyrings=" option of an IMA policy rule. This parsing
was re-performed each time an asymmetric key was added to a kernel
keyring for each loaded policy rule that contained a "keyrings=" option.
An example rule specifying this option is:
measure func=KEY_CHECK keyrings=a|b|c
The rule says to measure asymmetric keys added to any of the kernel
keyrings named "a", "b", or "c". The size of the buffer size was
equal to the size of the largest "keyrings=" value seen in a previously
loaded rule (5 + 1 for the NUL-terminator in the previous example) and
the buffer was pre-allocated at the time of policy load.
The pre-allocated buffer approach suffered from a couple bugs:
1) There was no locking around the use of the buffer so concurrent key
add operations, to two different keyrings, would result in the
strsep() loop of ima_match_keyring() to modify the buffer at the same
time. This resulted in unexpected results from ima_match_keyring()
and, therefore, could cause unintended keys to be measured or keys to
not be measured when IMA policy intended for them to be measured.
2) If the kstrdup() that initialized entry->keyrings in ima_parse_rule()
failed, the ima_keyrings buffer was freed and set to NULL even when a
valid KEY_CHECK rule was previously loaded. The next KEY_CHECK event
would trigger a call to strcpy() with a NULL destination pointer and
crash the kernel.
Remove the need for a pre-allocated global buffer by parsing the list of
keyrings in a KEY_CHECK rule at the time of policy load. The
ima_rule_entry will contain an array of string pointers which point to
the name of each keyring specified in the rule. No string processing
needs to happen at the time of asymmetric key add so iterating through
the list and doing a string comparison is all that's required at the
time of policy check.
In the process of changing how the "keyrings=" policy option is handled,
a couple additional bugs were fixed:
1) The rule parser accepted rules containing invalid "keyrings=" values
such as "a|b||c", "a|b|", or simply "|".
2) The /sys/kernel/security/ima/policy file did not display the entire
"keyrings=" value if the list of keyrings was longer than what could
fit in the fixed size tbuf buffer in ima_policy_show().
Fixes: 5c7bac9fb2 ("IMA: pre-allocate buffer to hold keyrings string")
Fixes: 2b60c0eced ("IMA: Read keyrings= option from the IMA policy")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----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=s2Jw
-----END PGP SIGNATURE-----
Merge tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"A couple of minor documentation updates only for this release"
* tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: drop duplicated words in header file comments
Replace HTTP links with HTTPS ones: security
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
-----BEGIN PGP SIGNATURE-----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=M/tq
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The nicest change is the IMA policy rule checking. The other changes
include allowing the kexec boot cmdline line measure policy rules to
be defined in terms of the inode associated with the kexec kernel
image, making the IMA_APPRAISE_BOOTPARAM, which governs the IMA
appraise mode (log, fix, enforce), a runtime decision based on the
secure boot mode of the system, and including errno in the audit log"
* tag 'integrity-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: remove redundant initialization of variable ret
ima: move APPRAISE_BOOTPARAM dependency on ARCH_POLICY to runtime
ima: AppArmor satisfies the audit rule requirements
ima: Rename internal filter rule functions
ima: Support additional conditionals in the KEXEC_CMDLINE hook function
ima: Use the common function to detect LSM conditionals in a rule
ima: Move comprehensive rule validation checks out of the token parser
ima: Use correct type for the args_p member of ima_rule_entry.lsm elements
ima: Shallow copy the args_p member of ima_rule_entry.lsm elements
ima: Fail rule parsing when appraise_flag=blacklist is unsupportable
ima: Fail rule parsing when the KEY_CHECK hook is combined with an invalid cond
ima: Fail rule parsing when the KEXEC_CMDLINE hook is combined with an invalid cond
ima: Fail rule parsing when buffer hook functions have an invalid action
ima: Free the entire rule if it fails to parse
ima: Free the entire rule when deleting a list of rules
ima: Have the LSM free its audit rule
IMA: Add audit log for failure conditions
integrity: Add errno field in audit message
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Fixes: eb5798f2e2 ("integrity: convert digsig to akcipher api")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Addresses-Coverity: ("Unused value")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA_APPRAISE_BOOTPARAM config allows enabling different "ima_appraise="
modes - log, fix, enforce - at run time, but not when IMA architecture
specific policies are enabled. This prevents properly labeling the
filesystem on systems where secure boot is supported, but not enabled on the
platform. Only when secure boot is actually enabled should these IMA
appraise modes be disabled.
This patch removes the compile time dependency and makes it a runtime
decision, based on the secure boot state of that platform.
Test results as follows:
-> x86-64 with secure boot enabled
[ 0.015637] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix
[ 0.015668] ima: Secure boot enabled: ignoring ima_appraise=fix boot parameter option
-> powerpc with secure boot disabled
[ 0.000000] Kernel command line: <...> ima_policy=appraise_tcb ima_appraise=fix
[ 0.000000] Secure boot mode disabled
-> Running the system without secure boot and with both options set:
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_ARCH_POLICY=y
Audit prompts "missing-hash" but still allow execution and, consequently,
filesystem labeling:
type=INTEGRITY_DATA msg=audit(07/09/2020 12:30:27.778:1691) : pid=4976
uid=root auid=root ses=2
subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 op=appraise_data
cause=missing-hash comm=bash name=/usr/bin/evmctl dev="dm-0" ino=493150
res=no
Cc: stable@vger.kernel.org
Fixes: d958083a8f ("x86/ima: define arch_get_ima_policy() for x86")
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Cc: stable@vger.kernel.org # 5.0
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
AppArmor meets all the requirements for IMA in terms of audit rules
since commit e79c26d040 ("apparmor: Add support for audit rule
filtering"). Update IMA's Kconfig section for CONFIG_IMA_LSM_RULES to
reflect this.
Fixes: e79c26d040 ("apparmor: Add support for audit rule filtering")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Rename IMA's internal filter rule functions from security_filter_rule_*()
to ima_filter_rule_*(). This avoids polluting the security_* namespace,
which is typically reserved for general security subsystem
infrastructure.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
[zohar@linux.ibm.com: reword using the term "filter", not "audit"]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Take the properties of the kexec kernel's inode and the current task
ownership into consideration when matching a KEXEC_CMDLINE operation to
the rules in the IMA policy. This allows for some uniformity when
writing IMA policy rules for KEXEC_KERNEL_CHECK, KEXEC_INITRAMFS_CHECK,
and KEXEC_CMDLINE operations.
Prior to this patch, it was not possible to write a set of rules like
this:
dont_measure func=KEXEC_KERNEL_CHECK obj_type=foo_t
dont_measure func=KEXEC_INITRAMFS_CHECK obj_type=foo_t
dont_measure func=KEXEC_CMDLINE obj_type=foo_t
measure func=KEXEC_KERNEL_CHECK
measure func=KEXEC_INITRAMFS_CHECK
measure func=KEXEC_CMDLINE
The inode information associated with the kernel being loaded by a
kexec_kernel_load(2) syscall can now be included in the decision to
measure or not
Additonally, the uid, euid, and subj_* conditionals can also now be
used in KEXEC_CMDLINE rules. There was no technical reason as to why
those conditionals weren't being considered previously other than
ima_match_rules() didn't have a valid inode to use so it immediately
bailed out for KEXEC_CMDLINE operations rather than going through the
full list of conditional comparisons.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: kexec@lists.infradead.org
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make broader use of ima_rule_contains_lsm_cond() to check if a given
rule contains an LSM conditional. This is a code cleanup and has no
user-facing change.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Use ima_validate_rule(), at the end of the token parsing stage, to
verify combinations of actions, hooks, and flags. This is useful to
increase readability by consolidating such checks into a single function
and also because rule conditionals can be specified in arbitrary order
making it difficult to do comprehensive rule validation until the entire
rule has been parsed.
This allows for the check that ties together the "keyrings" conditional
with the KEY_CHECK function hook to be moved into the final rule
validation.
The modsig check no longer needs to compiled conditionally because the
token parser will ensure that modsig support is enabled before accepting
"imasig|modsig" appraise type values. The final rule validation will
ensure that appraise_type and appraise_flag options are only present in
appraise rules.
Finally, this allows for the check that ties together the "pcr"
conditional with the measure action to be moved into the final rule
validation.
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make args_p be of the char pointer type rather than have it be a void
pointer that gets casted to char pointer when it is used. It is a simple
NUL-terminated string as returned by match_strdup().
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The args_p member is a simple string that is allocated by
ima_rule_init(). Shallow copy it like other non-LSM references in
ima_rule_entry structs.
There are no longer any necessary error path cleanups to do in
ima_lsm_copy_rule().
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Verifying that a file hash is not blacklisted is currently only
supported for files with appended signatures (modsig). In the future,
this might change.
For now, the "appraise_flag" option is only appropriate for appraise
actions and its "blacklist" value is only appropriate when
CONFIG_IMA_APPRAISE_MODSIG is enabled and "appraise_flag=blacklist" is
only appropriate when "appraise_type=imasig|modsig" is also present.
Make this clear at policy load so that IMA policy authors don't assume
that other uses of "appraise_flag=blacklist" are supported.
Fixes: 273df864cf ("ima: Check against blacklisted hashes for files with modsig")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reivewed-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The KEY_CHECK function only supports the uid, pcr, and keyrings
conditionals. Make this clear at policy load so that IMA policy authors
don't assume that other conditionals are supported.
Fixes: 5808611ccc ("IMA: Add KEY_CHECK func to measure keys")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The KEXEC_CMDLINE hook function only supports the pcr conditional. Make
this clear at policy load so that IMA policy authors don't assume that
other conditionals are supported.
Since KEXEC_CMDLINE's inception, ima_match_rules() has always returned
true on any loaded KEXEC_CMDLINE rule without any consideration for
other conditionals present in the rule. Make it clear that pcr is the
only supported KEXEC_CMDLINE conditional by returning an error during
policy load.
An example of why this is a problem can be explained with the following
rule:
dont_measure func=KEXEC_CMDLINE obj_type=foo_t
An IMA policy author would have assumed that rule is valid because the
parser accepted it but the result was that measurements for all
KEXEC_CMDLINE operations would be disabled.
Fixes: b0935123a1 ("IMA: Define a new hook to measure the kexec boot command line arguments")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Buffer based hook functions, such as KEXEC_CMDLINE and KEY_CHECK, can
only measure. The process_buffer_measurement() function quietly ignores
all actions except measure so make this behavior clear at the time of
policy load.
The parsing of the keyrings conditional had a check to ensure that it
was only specified with measure actions but the check should be on the
hook function and not the keyrings conditional since
"appraise func=KEY_CHECK" is not a valid rule.
Fixes: b0935123a1 ("IMA: Define a new hook to measure the kexec boot command line arguments")
Fixes: 5808611ccc ("IMA: Add KEY_CHECK func to measure keys")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Use ima_free_rule() to fix memory leaks of allocated ima_rule_entry
members, such as .fsname and .keyrings, when an error is encountered
during rule parsing.
Set the args_p pointer to NULL after freeing it in the error path of
ima_lsm_rule_init() so that it isn't freed twice.
This fixes a memory leak seen when loading an rule that contains an
additional piece of allocated memory, such as an fsname, followed by an
invalid conditional:
# echo "measure fsname=tmpfs bad=cond" > /sys/kernel/security/ima/policy
-bash: echo: write error: Invalid argument
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff98e7e4ece6c0 (size 8):
comm "bash", pid 672, jiffies 4294791843 (age 21.855s)
hex dump (first 8 bytes):
74 6d 70 66 73 00 6b a5 tmpfs.k.
backtrace:
[<00000000abab7413>] kstrdup+0x2e/0x60
[<00000000f11ede32>] ima_parse_add_rule+0x7d4/0x1020
[<00000000f883dd7a>] ima_write_policy+0xab/0x1d0
[<00000000b17cf753>] vfs_write+0xde/0x1d0
[<00000000b8ddfdea>] ksys_write+0x68/0xe0
[<00000000b8e21e87>] do_syscall_64+0x56/0xa0
[<0000000089ea7b98>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f1b08bbcbd ("ima: define a new policy condition based on the filesystem name")
Fixes: 2b60c0eced ("IMA: Read keyrings= option from the IMA policy")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Create a function, ima_free_rule(), to free all memory associated with
an ima_rule_entry. Use the new function to fix memory leaks of allocated
ima_rule_entry members, such as .fsname and .keyrings, when deleting a
list of rules.
Make the existing ima_lsm_free_rule() function specific to the LSM
audit rule array of an ima_rule_entry and require that callers make an
additional call to kfree to free the ima_rule_entry itself.
This fixes a memory leak seen when loading by a valid rule that contains
an additional piece of allocated memory, such as an fsname, followed by
an invalid rule that triggers a policy load failure:
# echo -e "dont_measure fsname=securityfs\nbad syntax" > \
/sys/kernel/security/ima/policy
-bash: echo: write error: Invalid argument
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff9bab67ca12c0 (size 16):
comm "bash", pid 684, jiffies 4295212803 (age 252.344s)
hex dump (first 16 bytes):
73 65 63 75 72 69 74 79 66 73 00 6b 6b 6b 6b a5 securityfs.kkkk.
backtrace:
[<00000000adc80b1b>] kstrdup+0x2e/0x60
[<00000000d504cb0d>] ima_parse_add_rule+0x7d4/0x1020
[<00000000444825ac>] ima_write_policy+0xab/0x1d0
[<000000002b7f0d6c>] vfs_write+0xde/0x1d0
[<0000000096feedcf>] ksys_write+0x68/0xe0
[<0000000052b544a2>] do_syscall_64+0x56/0xa0
[<000000007ead1ba7>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f1b08bbcbd ("ima: define a new policy condition based on the filesystem name")
Fixes: 2b60c0eced ("IMA: Read keyrings= option from the IMA policy")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Ask the LSM to free its audit rule rather than directly calling kfree().
Both AppArmor and SELinux do additional work in their audit_rule_free()
hooks. Fix memory leaks by allowing the LSMs to perform necessary work.
Fixes: b169424551 ("ima: use the lsm policy update notifier")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Error code is not included in the audit messages logged by
the integrity subsystem.
Define a new function integrity_audit_message() that takes error code
in the "errno" parameter. Add "errno" field in the audit messages logged
by the integrity subsystem and set the value passed in the "errno"
parameter.
[ 6.303048] audit: type=1804 audit(1592506281.627:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel op=measuring_key cause=ENOMEM comm="swapper/0" name=".builtin_trusted_keys" res=0 errno=-12
[ 7.987647] audit: type=1802 audit(1592506283.312:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=policy_update cause=completed comm="systemd" res=1 errno=0
[ 8.019432] audit: type=1804 audit(1592506283.344:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=measuring_kexec_cmdline cause=hashing_error comm="systemd" name="kexec-cmdline" res=0 errno=-22
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Registers 8-9 are used to store measurements of the kernel and its
command line (e.g., grub2 bootloader with tpm module enabled). IMA
should include them in the boot aggregate. Registers 8-9 should be
only included in non-SHA1 digests to avoid ambiguity.
Signed-off-by: Maurizio Drocco <maurizio.drocco@ibm.com>
Reviewed-by: Bruno Meneguele <bmeneg@redhat.com>
Tested-by: Bruno Meneguele <bmeneg@redhat.com> (TPM 1.2, TPM 2.0)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Make sure IMA is enabled before checking mprotect change. Addresses
report of a 3.7% regression of boot-time.dhcp.
Fixes: 8eb613c0b8 ("ima: verify mprotect change is consistent with mmap policy")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 6cc7c266e5 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.
Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().
Cc: stable@vger.kernel.org
Fixes: 6cc7c266e5 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=G3xj
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 0b6cf6b97b ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
To support multiple template digests, the static array entry->digest has
been replaced with a dynamically allocated array in commit aa724fe18a
("ima: Switch to dynamically allocated buffer for template digests"). The
array is allocated in ima_alloc_init_template() and if the returned pointer
is NULL, ima_free_template_entry() is called.
However, (*entry)->template_desc is not yet initialized while it is used by
ima_free_template_entry(). This patch fixes the issue by directly freeing
*entry without calling ima_free_template_entry().
Fixes: aa724fe18a ("ima: Switch to dynamically allocated buffer for template digests")
Reported-by: syzbot+223310b454ba6b75974e@syzkaller.appspotmail.com
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If the template field 'd' is chosen and the digest to be added to the
measurement entry was not calculated with SHA1 or MD5, it is
recalculated with SHA1, by using the passed file descriptor. However, this
cannot be done for boot_aggregate, because there is no file descriptor.
This patch adds a call to ima_calc_boot_aggregate() in
ima_eventdigest_init(), so that the digest can be recalculated also for the
boot_aggregate entry.
Cc: stable@vger.kernel.org # 3.13.x
Fixes: 3ce1217d6c ("ima: define template fields library and new helpers")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch prevents the following oops:
[ 10.771813] BUG: kernel NULL pointer dereference, address: 0000000000000
[...]
[ 10.779790] RIP: 0010:ima_match_policy+0xf7/0xb80
[...]
[ 10.798576] Call Trace:
[ 10.798993] ? ima_lsm_policy_change+0x2b0/0x2b0
[ 10.799753] ? inode_init_owner+0x1a0/0x1a0
[ 10.800484] ? _raw_spin_lock+0x7a/0xd0
[ 10.801592] ima_must_appraise.part.0+0xb6/0xf0
[ 10.802313] ? ima_fix_xattr.isra.0+0xd0/0xd0
[ 10.803167] ima_must_appraise+0x4f/0x70
[ 10.804004] ima_post_path_mknod+0x2e/0x80
[ 10.804800] do_mknodat+0x396/0x3c0
It occurs when there is a failure during IMA initialization, and
ima_init_policy() is not called. IMA hooks still call ima_match_policy()
but ima_rules is NULL. This patch prevents the crash by directly assigning
the ima_default_policy pointer to ima_rules when ima_rules is defined. This
wouldn't alter the existing behavior, as ima_rules is always set at the end
of ima_init_policy().
Cc: stable@vger.kernel.org # 3.7.x
Fixes: 07f6a79415 ("ima: add appraise action keywords and default rules")
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Files can be mmap'ed read/write and later changed to execute to circumvent
IMA's mmap appraise policy rules. Due to locking issues (mmap semaphore
would be taken prior to i_mutex), files can not be measured or appraised at
this point. Eliminate this integrity gap, by denying the mprotect
PROT_EXECUTE change, if an mmap appraise policy rule exists.
On mprotect change success, return 0. On failure, return -EACESS.
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IS_ERR_OR_NULL() function has two conditions and if we got really
unlucky we could hit a race where "ptr" started as an error pointer and
then was set to NULL. Both conditions would be false even though the
pointer at the end was NULL.
This patch fixes the problem by ensuring that "*tfm" can only be NULL
or valid. I have introduced a "tmp_tfm" variable to make that work. I
also reversed a condition and pulled the code in one tab.
Reported-by: Roberto Sassu <roberto.sassu@huawei.com>
Fixes: 53de3b080d ("evm: Check also if *tfm is an error pointer in init_desc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Don't immediately return if the signature is portable and security.ima is
not present. Just set error so that memory allocated is freed before
returning from evm_calc_hmac_or_hash().
Fixes: 50b977481f ("EVM: Add support for portable signature format")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
After adding the new add_rule() function in commit c52657d93b
("ima: refactor ima_init_policy()"), all appraisal flags are added to the
temp_ima_appraise variable. Revert to the previous behavior instead of
removing build_ima_appraise, to benefit from the protection offered by
__ro_after_init.
The mentioned commit introduced a bug, as it makes all the flags
modifiable, while build_ima_appraise flags can be protected with
__ro_after_init.
Cc: stable@vger.kernel.org # 5.0.x
Fixes: c52657d93b ("ima: refactor ima_init_policy()")
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function ima_appraise_flag() returns the flag to be set in
temp_ima_appraise depending on the hook identifier passed as an argument.
It is not necessary to set the flag again for the POLICY_CHECK hook.
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Function hash_long() accepts unsigned long, while currently only one byte
is passed from ima_hash_key(), which calculates a key for ima_htable.
Given that hashing the digest does not give clear benefits compared to
using the digest itself, remove hash_long() and return the modulus
calculated on the first two bytes of the digest with the number of slots.
Also reduce the depth of the hash table by doubling the number of slots.
Cc: stable@vger.kernel.org
Fixes: 3323eec921 ("integrity: IMA as an integrity service provider")
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Acked-by: David.Laight@aculab.com (big endian system concerns)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch fixes the following warning and few other instances of
traversal of evm_config_xattrnames list:
[ 32.848432] =============================
[ 32.848707] WARNING: suspicious RCU usage
[ 32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted
[ 32.849308] -----------------------------
[ 32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!!
Since entries are only added to the list and never deleted, use
list_for_each_entry_lockless() instead of list_for_each_entry_rcu for
traversing the list. Also, add a relevant comment in evm_secfs.c to
indicate this fact.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch fixes the return value of ima_write_policy() when a new policy
is directly passed to IMA and the current policy requires appraisal of the
file containing the policy. Currently, if appraisal is not in ENFORCE mode,
ima_write_policy() returns 0 and leads user space applications to an
endless loop. Fix this issue by denying the operation regardless of the
appraisal mode.
Cc: stable@vger.kernel.org # 4.10.x
Fixes: 19f8a84713 ("ima: measure and appraise the IMA policy itself")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch avoids a kernel panic due to accessing an error pointer set by
crypto_alloc_shash(). It occurs especially when there are many files that
require an unsupported algorithm, as it would increase the likelihood of
the following race condition:
Task A: *tfm = crypto_alloc_shash() <= error pointer
Task B: if (*tfm == NULL) <= *tfm is not NULL, use it
Task B: rc = crypto_shash_init(desc) <= panic
Task A: *tfm = NULL
This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new
crypto context must be created.
Cc: stable@vger.kernel.org
Fixes: d46eb36995 ("evm: crypto hash replaced by shash")
Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit a408e4a86b ("ima: open a new file instance if no read
permissions") tries to create a new file descriptor to calculate a file
digest if the file has not been opened with O_RDONLY flag. However, if a
new file descriptor cannot be obtained, it sets the FMODE_READ flag to
file->f_flags instead of file->f_mode.
This patch fixes this issue by replacing f_flags with f_mode as it was
before that commit.
Cc: stable@vger.kernel.org # 4.20.x
Fixes: a408e4a86b ("ima: open a new file instance if no read permissions")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Before calculating a digest for each PCR bank, collisions were detected
with a SHA1 digest. This patch includes ima_hash_algo among the algorithms
used to calculate the template digest and checks collisions on that digest.
The position in the measurement entry array of the template digest
calculated with the IMA default hash algorithm is stored in the
ima_hash_algo_idx global variable and is determined at IMA initialization
time.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch modifies ima_calc_field_array_hash() to calculate a template
digest for each allocated PCR bank and SHA1. It also passes the tpm_digest
array of the template entry to ima_pcr_extend() or in case of a violation,
the pre-initialized digests array filled with 0xff.
Padding with zeros is still done if the mapping between TPM algorithm ID
and crypto ID is unknown.
This patch calculates again the template digest when a measurement list is
restored. Copying only the SHA1 digest (due to the limitation of the
current measurement list format) is not sufficient, as hash collision
detection will be done on the digest calculated with the IMA default hash
algorithm.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch creates a crypto_shash structure for each allocated PCR bank and
for SHA1 if a bank with that algorithm is not currently allocated.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch dynamically allocates the array of tpm_digest structures in
ima_alloc_init_template() and ima_restore_template_data(). The size of the
array is equal to the number of PCR banks plus ima_extra_slots, to make
room for SHA1 and the IMA default hash algorithm, when PCR banks with those
algorithms are not allocated.
Calculating the SHA1 digest is mandatory, as SHA1 still remains the default
hash algorithm for the measurement list. When IMA will support the Crypto
Agile format, remaining digests will be also provided.
The position in the measurement entry array of the SHA1 digest is stored in
the ima_sha1_idx global variable and is determined at IMA initialization
time.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In preparation for the patch that calculates a digest for each allocated
PCR bank, this patch passes to ima_calc_field_array_hash() the
ima_template_entry structure, so that digests can be directly stored in
that structure instead of ima_digest_data.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Evaluate error in init_ima() before register_blocking_lsm_notifier() and
return if not zero.
Cc: stable@vger.kernel.org # 5.3.x
Fixes: b169424551 ("ima: use the lsm policy update notifier")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
boot_aggregate is the first entry of IMA measurement list. Its purpose is
to link pre-boot measurements to IMA measurements. As IMA was designed to
work with a TPM 1.2, the SHA1 PCR bank was always selected even if a
TPM 2.0 with support for stronger hash algorithms is available.
This patch first tries to find a PCR bank with the IMA default hash
algorithm. If it does not find it, it selects the SHA256 PCR bank for
TPM 2.0 and SHA1 for TPM 1.2. Ultimately, it selects SHA1 also for TPM 2.0
if the SHA256 PCR bank is not found.
If none of the PCR banks above can be found, boot_aggregate file digest is
filled with zeros, as for TPM bypass, making it impossible to perform a
remote attestation of the system.
Cc: stable@vger.kernel.org # 5.1.x
Fixes: 879b589210 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull integrity updates from Mimi Zohar:
"Just a couple of updates for linux-5.7:
- A new Kconfig option to enable IMA architecture specific runtime
policy rules needed for secure and/or trusted boot, as requested.
- Some message cleanup (eg. pr_fmt, additional error messages)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add a new CONFIG for loading arch-specific policies
integrity: Remove duplicate pr_fmt definitions
IMA: Add log statements for failure conditions
IMA: Update KBUILD_MODNAME for IMA files to ima
Every time a new architecture defines the IMA architecture specific
functions - arch_ima_get_secureboot() and arch_ima_get_policy(), the IMA
include file needs to be updated. To avoid this "noise", this patch
defines a new IMA Kconfig IMA_SECURE_AND_OR_TRUSTED_BOOT option, allowing
the different architectures to select it.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Philipp Rudo <prudo@linux.ibm.com> (s390)
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The #define for formatting log messages, pr_fmt, is duplicated in the
files under security/integrity.
This change moves the definition to security/integrity/integrity.h and
removes the duplicate definitions in the other files under
security/integrity.
With this change, the messages in the following files will be prefixed
with 'integrity'.
security/integrity/platform_certs/platform_keyring.c
security/integrity/platform_certs/load_powerpc.c
security/integrity/platform_certs/load_uefi.c
security/integrity/iint.c
e.g. "integrity: Error adding keys to platform keyring %s\n"
And the messages in the following file will be prefixed with 'ima'.
security/integrity/ima/ima_mok.c
e.g. "ima: Allocating IMA blacklist keyring.\n"
For the rest of the files under security/integrity, there will be no
change in the message format.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
process_buffer_measurement() does not have log messages for failure
conditions.
This change adds a log statement in the above function.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The kbuild Makefile specifies object files for vmlinux in the $(obj-y)
lists. These lists depend on the kernel configuration[1].
The kbuild Makefile for IMA combines the object files for IMA into a
single object file namely ima.o. All the object files for IMA should be
combined into ima.o. But certain object files are being added to their
own $(obj-y). This results in the log messages from those modules getting
prefixed with their respective base file name, instead of "ima". This is
inconsistent with the log messages from the IMA modules that are combined
into ima.o.
This change fixes the above issue.
[1] Documentation\kbuild\makefiles.rst
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEnNKg2mrY9zMBdeK7wjcgfpV0+n0FAl5S7WYACgkQwjcgfpV0
+n1jmQgAmwV3V8pbgB4mi4P2Mv8w5Zj5feUe6uXnTR2AFv5nygLcTzdxN+TU/6lc
OmZv2zzdsAscYlhuUdI/4t4cXIjHAZI39+UBoNRuMqKbkbvXCFscZANLxvJjHjZv
FFbgUk0DXkF0BCEDuSLNavidAv4b3gZsOmHbPfwuB8xdP05LbvbS2mf+2tWVAi2z
ULfua/0o9yiwl19jSS6iQEPCvvLBeBzTLW7x5Rcm/S0JnotzB59yMaeqD7jO8JYP
5PvI4WM/l5UfVHnZp2k1R76AOjReALw8dQgqAsT79Q7+EH3sNNuIjU6omdy+DFf4
tnpwYfeLOaZ1SztNNfU87Hsgnn2CGw==
=pDE3
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than
usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will
increase the size of the validation matrix, and therefore the threshold to
making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started
to consider changes from the distros regarding UEFI boot, some of which are
highly specific to the way x86 does UEFI secure boot and measured boot,
based on knowledge of both shim internals and the layout of bootparams and
the x86 setup header. Having this maintenance burden on other architectures
(which don't need shim in the first place) is hard to justify, so instead,
we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O,
memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into
the firmware, instead of relying on the x86 EFI handover protocol or
device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI
handover protocol either, and could potentially be adopted by other
architectures (if another one ever surfaces where one execution mode
is a superset of another)
- Clean up the contents of struct efi, and move out everything that
doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware
implementations to return EFI_UNSUPPORTED from UEFI runtime services at
OS runtime, and expose a mask of which ones are supported or unsupported
via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor
on 32-bit ARM. Note that these patches were deliberately put at the
beginning so they can be used as a stable branch that will be shared with
a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Testing the value of the efi.get_variable function pointer is not
the right way to establish whether the platform supports EFI
variables at runtime. Instead, use the newly added granular check
that can test for the presence of each EFI runtime service
individually.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
sm3 has been supported by the ima hash algorithm, but it is not
yet in the Kconfig configuration list. After adding, both ima and tpm2
can support sm3 well.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If CONFIG_LOAD_UEFI_KEYS is enabled, the kernel attempts to load the certs
from the db, dbx and MokListRT EFI variables into the appropriate keyrings.
But it just assumes that the variables will be present and prints an error
if the certs can't be loaded, even when is possible that the variables may
not exist. For example the MokListRT variable will only be present if shim
is used.
So only print an error message about failing to get the certs list from an
EFI variable if this is found. Otherwise these printed errors just pollute
the kernel log ring buffer with confusing messages like the following:
[ 5.427251] Couldn't get size: 0x800000000000000e
[ 5.427261] MODSIGN: Couldn't get UEFI db list
[ 5.428012] Couldn't get size: 0x800000000000000e
[ 5.428023] Couldn't get UEFI MokListRT
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull IMA updates from Mimi Zohar:
"Two new features - measuring certificates and querying IMA for a file
hash - and three bug fixes:
- Measuring certificates is like the rest of IMA, based on policy,
but requires loading a custom policy. Certificates loaded onto a
keyring, for example during early boot, before a custom policy has
been loaded, are queued and only processed after loading the custom
policy.
- IMA calculates and caches files hashes. Other kernel subsystems,
and possibly kernel modules, are interested in accessing these
cached file hashes.
The bug fixes prevent classifying a file short read (e.g. shutdown) as
an invalid file signature, add a missing blank when displaying the
securityfs policy rules containing LSM labels, and, lastly, fix the
handling of the IMA policy information for unknown LSM labels"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: Defined delayed workqueue to free the queued keys
IMA: Call workqueue functions to measure queued keys
IMA: Define workqueue for early boot key measurements
IMA: pre-allocate buffer to hold keyrings string
ima: ima/lsm policy rule loading logic bug fixes
ima: add the ability to query the cached hash of a given file
ima: Add a space after printing LSM rules for readability
IMA: fix measuring asymmetric keys Kconfig
IMA: Read keyrings= option from the IMA policy
IMA: Add support to limit measuring keys
KEYS: Call the IMA hook to measure keys
IMA: Define an IMA hook to measure keys
IMA: Add KEY_CHECK func to measure keys
IMA: Check IMA policy flag
ima: avoid appraise error for hash calc interrupt
Keys queued for measurement should be freed if a custom IMA policy
was not loaded. Otherwise, the keys will remain queued forever
consuming kernel memory.
This patch defines a delayed workqueue to handle the above scenario.
The workqueue handler is setup to execute 5 minutes after IMA
initialization is completed.
If a custom IMA policy is loaded before the workqueue handler is
scheduled to execute, the workqueue task is cancelled and any queued keys
are processed for measurement. But if a custom policy was not loaded then
the queued keys are just freed when the delayed workqueue handler is run.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <rong.a.chen@intel.com> # sleeping
function called from invalid context
Reported-by: kbuild test robot <lkp@intel.com> # redefinition of
ima_init_key_queue() function.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measuring keys requires a custom IMA policy to be loaded. Keys should
be queued for measurement if a custom IMA policy is not yet loaded.
Keys queued for measurement, if any, should be processed when a custom
policy is loaded.
This patch updates the IMA hook function ima_post_key_create_or_update()
to queue the key if a custom IMA policy has not yet been loaded. And,
ima_update_policy() function, which is called when a custom IMA policy
is loaded, is updated to process queued keys.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measuring keys requires a custom IMA policy to be loaded. Keys created
or updated before a custom IMA policy is loaded should be queued and
will be processed after a custom policy is loaded.
This patch defines a workqueue for queuing keys when a custom IMA policy
has not yet been loaded. An intermediate Kconfig boolean option namely
IMA_QUEUE_EARLY_BOOT_KEYS is used to declare the workqueue functions.
A flag namely ima_process_keys is used to check if the key should be
queued or should be processed immediately.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
ima_match_keyring() is called while holding rcu read lock. Since this
function executes in atomic context, it should not call any function
that can sleep (such as kstrdup()).
This patch pre-allocates a buffer to hold the keyrings string read from
the IMA policy and uses that to match the given keyring.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Fixes: e9085e0ad3 ("IMA: Add support to limit measuring keys")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Keep the ima policy rules around from the beginning even if they appear
invalid at the time of loading, as they may become active after an lsm
policy load. However, loading a custom IMA policy with unknown LSM
labels is only safe after we have transitioned from the "built-in"
policy rules to a custom IMA policy.
Patch also fixes the rule re-use during the lsm policy reload and makes
some prints a bit more human readable.
Changelog:
v4:
- Do not allow the initial policy load refer to non-existing lsm rules.
v3:
- Fix too wide policy rule matching for non-initialized LSMs
v2:
- Fix log prints
Fixes: b169424551 ("ima: use the lsm policy update notifier")
Cc: Casey Schaufler <casey@schaufler-ca.com>
Reported-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Konsta Karsisto <konsta.karsisto@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This allows other parts of the kernel (perhaps a stacked LSM allowing
system monitoring, eg. the proposed KRSI LSM [1]) to retrieve the hash
of a given file from IMA if it's present in the iint cache.
It's true that the existence of the hash means that it's also in the
audit logs or in /sys/kernel/security/ima/ascii_runtime_measurements,
but it can be difficult to pull that information out for every
subsequent exec. This is especially true if a given host has been up
for a long time and the file was first measured a long time ago.
It should be kept in mind that this function gives access to cached
entries which can be removed, for instance on security_inode_free().
This is based on Peter Moody's patch:
https://sourceforge.net/p/linux-ima/mailman/message/33036180/
[1] https://lkml.org/lkml/2019/9/10/393
Signed-off-by: Florent Revest <revest@google.com>
Reviewed-by: KP Singh <kpsingh@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When reading ima_policy from securityfs, there is a missing
space between output string of LSM rules and the remaining
rules.
Signed-off-by: Clay Chang <clayc@hpe.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
As a result of the asymmetric public keys subtype Kconfig option being
defined as tristate, with the existing IMA Makefile, ima_asymmetric_keys.c
could be built as a kernel module. To prevent this from happening, this
patch defines and uses an intermediate Kconfig boolean option named
IMA_MEASURE_ASYMMETRIC_KEYS.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: James.Bottomley <James.Bottomley@HansenPartnership.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reported-by: kbuild test robot <lkp@intel.com> # ima_asymmetric_keys.c
is built as a kernel module.
Fixes: 88e70da170 ("IMA: Define an IMA hook to measure keys")
Fixes: cb1aa3823c ("KEYS: Call the IMA hook to measure keys")
[zohar@linux.ibm.com: updated patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Read "keyrings=" option, if specified in the IMA policy, and store in
the list of IMA rules when the configured IMA policy is read.
This patch defines a new policy token enum namely Opt_keyrings
and an option flag IMA_KEYRINGS for reading "keyrings=" option
from the IMA policy.
Updated ima_parse_rule() to parse "keyrings=" option in the policy.
Updated ima_policy_show() to display "keyrings=" option.
The following example illustrates how key measurement can be verified.
Sample "key" measurement rule in the IMA policy:
measure func=KEY_CHECK uid=0 keyrings=.ima|.evm template=ima-buf
Display "key" measurement in the IMA measurement list:
cat /sys/kernel/security/ima/ascii_runtime_measurements
10 faf3...e702 ima-buf sha256:27c915b8ddb9fae7214cf0a8a7043cc3eeeaa7539bcb136f8427067b5f6c3b7b .ima 308202863082...4aee
Verify "key" measurement data for a key added to ".ima" keyring:
cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements | grep -m 1 "\.ima" | cut -d' ' -f 6 | xxd -r -p |tee ima-cert.der | sha256sum | cut -d' ' -f 1
The output of the above command should match the template hash
of the first "key" measurement entry in the IMA measurement list for
the key added to ".ima" keyring.
The file namely "ima-cert.der" generated by the above command
should be a valid x509 certificate (in DER format) and should match
the one that was used to import the key to the ".ima" keyring.
The certificate file can be verified using openssl tool.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Limit measuring keys to those keys being loaded onto a given set of
keyrings only and when the user id (uid) matches if uid is specified
in the policy.
This patch defines a new IMA policy option namely "keyrings=" that
can be used to specify a set of keyrings. If this option is specified
in the policy for "measure func=KEY_CHECK" then only the keys
loaded onto a keyring given in the "keyrings=" option are measured.
If uid is specified in the policy then the key is measured only if
the current user id matches the one specified in the policy.
Added a new parameter namely "keyring" (name of the keyring) to
process_buffer_measurement(). The keyring name is passed to
ima_get_action() to determine the required action.
ima_match_rules() is updated to check keyring in the policy, if
specified, for KEY_CHECK function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measure asymmetric keys used for verifying file signatures,
certificates, etc.
This patch defines a new IMA hook namely ima_post_key_create_or_update()
to measure the payload used to create a new asymmetric key or
update an existing asymmetric key.
Asymmetric key structure is defined only when
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is defined. Since the IMA hook
measures asymmetric keys, the IMA hook is defined in a new file namely
ima_asymmetric_keys.c which is built only if
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is defined.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measure keys loaded onto any keyring.
This patch defines a new IMA policy func namely KEY_CHECK to
measure keys. Updated ima_match_rules() to check for KEY_CHECK
and ima_parse_rule() to handle KEY_CHECK.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
process_buffer_measurement() may be called prior to IMA being
initialized (for instance, when the IMA hook is called when
a key is added to the .builtin_trusted_keys keyring), which
would result in a kernel panic.
This patch adds the check in process_buffer_measurement()
to return immediately if IMA is not initialized yet.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The integrity_kernel_read() call in ima_calc_file_hash_tfm() can return
a value of 0 before all bytes of the file are read. A value of 0 would
normally indicate an EOF. This has been observed if a user process is
causing a file appraisal and is terminated with a SIGTERM signal. The
most common occurrence of seeing the problem is if a shutdown or systemd
reload is initiated while files are being appraised.
The problem is similar to commit <f5e1040196db> (ima: always return
negative code for error) that fixed the problem in
ima_calc_file_hash_atfm().
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Patrick Callaghan <patrickc@linux.ibm.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
The keys used to verify the Host OS kernel are managed by firmware as
secure variables. This patch loads the verification keys into the
.platform keyring and revocation hashes into .blacklist keyring. This
enables verification and loading of the kernels signed by the boot
time keys which are trusted by firmware.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
[mpe: Search by compatible in load_powerpc_certs(), not using format]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-5-git-send-email-nayna@linux.ibm.com
The handlers to add the keys to the .platform keyring and blacklisted
hashes to the .blacklist keyring is common for both the uefi and powerpc
mechanisms of loading the keys/hashes from the firmware.
This patch moves the common code from load_uefi.c to keyring_handler.c
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-4-git-send-email-nayna@linux.ibm.com
Asymmetric private keys are used to sign multiple files. The kernel
currently supports checking against blacklisted keys. However, if the
public key is blacklisted, any file signed by the blacklisted key will
automatically fail signature verification. Blacklisting the public key
is not fine enough granularity, as we might want to only blacklist a
particular file.
This patch adds support for checking against the blacklisted hash of
the file, without the appended signature, based on the IMA policy. It
defines a new policy option "appraise_flag=check_blacklist".
In addition to the blacklisted binary hashes stored in the firmware
"dbx" variable, the Linux kernel may be configured to load blacklisted
binary hashes onto the .blacklist keyring as well. The following
example shows how to blacklist a specific kernel module hash.
$ sha256sum kernel/kheaders.ko
77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
kernel/kheaders.ko
$ grep BLACKLIST .config
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST="blacklist-hash-list"
$ cat certs/blacklist-hash-list
"bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3"
Update the IMA custom measurement and appraisal policy
rules (/etc/ima-policy):
measure func=MODULE_CHECK template=ima-modsig
appraise func=MODULE_CHECK appraise_flag=check_blacklist
appraise_type=imasig|modsig
After building, installing, and rebooting the kernel:
545660333 ---lswrv 0 0 \_ blacklist:
bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
measure func=MODULE_CHECK template=ima-modsig
appraise func=MODULE_CHECK appraise_flag=check_blacklist
appraise_type=imasig|modsig
modprobe: ERROR: could not insert 'kheaders': Permission denied
10 0c9834db5a0182c1fb0cdc5d3adcf11a11fd83dd ima-sig
sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
2 /usr/lib/modules/5.4.0-rc3+/kernel/kernel/kheaders.ko
10 82aad2bcc3fa8ed94762356b5c14838f3bcfa6a0 ima-modsig
sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
2 /usr/lib/modules/5.4.0rc3+/kernel/kernel/kheaders.ko sha256:77fa889b3
5a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
3082029a06092a864886f70d010702a082028b30820287020101310d300b0609608648
016503040201300b06092a864886f70d01070131820264....
10 25b72217cc1152b44b134ce2cd68f12dfb71acb3 ima-buf
sha256:8b58427fedcf8f4b20bc8dc007f2e232bf7285d7b93a66476321f9c2a3aa132
b blacklisted-hash
77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[zohar@linux.ibm.com: updated patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1572492694-6520-8-git-send-email-zohar@linux.ibm.com
process_buffer_measurement() is limited to measuring the kexec boot
command line. This patch makes process_buffer_measurement() more
generic, allowing it to measure other types of buffer data (e.g.
blacklisted binary hashes or key hashes).
process_buffer_measurement() may be called directly from an IMA hook
or as an auxiliary measurement record. In both cases the buffer
measurement is based on policy. This patch modifies the function to
conditionally retrieve the policy defined PCR and template for the IMA
hook case.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[zohar@linux.ibm.com: added comment in process_buffer_measurement()]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1572492694-6520-6-git-send-email-zohar@linux.ibm.com
The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.
subdir-$(CONFIG_...) is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I guess commit 15ea0e1e3e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.
load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:
$(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar
But, you do not need to fix it.
Commit 8c97023cf0 ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct ima_template_entry {
...
struct ima_field_data template_data[0]; /* template related data */
};
instance = kzalloc(sizeof(struct ima_template_entry) + count * sizeof(struct ima_field_data), GFP_NOFS);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_NOFS);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If we can't parse the PKCS7 in the appended modsig, we will free the modsig
structure and then access one of its members to determine the error value.
Fixes: 39b0709636 ("ima: Implement support for module-style appended signatures")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Systems in lockdown mode should block the kexec of untrusted kernels.
For x86 and ARM we can ensure that a kernel is trustworthy by validating
a PE signature, but this isn't possible on other architectures. On those
platforms we can use IMA digital signatures instead. Add a function to
determine whether IMA has or will verify signatures for a given event type,
and if so permit kexec_file() even if the kernel is otherwise locked down.
This is restricted to cases where CONFIG_INTEGRITY_TRUSTED_KEYRING is set
in order to prevent an attacker from loading additional keys at runtime.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
This is a preparatory patch for kexec_file_load() lockdown. A locked down
kernel needs to prevent unsigned kernel images from being loaded with
kexec_file_load(). Currently, the only way to force the signature
verification is compiling with KEXEC_VERIFY_SIG. This prevents loading
usigned images even when the kernel is not locked down at runtime.
This patch splits KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE.
Analogous to the MODULE_SIG and MODULE_SIG_FORCE for modules, KEXEC_SIG
turns on the signature verification but allows unsigned images to be
loaded. KEXEC_SIG_FORCE disallows images without a valid signature.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
cc: kexec@lists.infradead.org
Signed-off-by: James Morris <jmorris@namei.org>
integrity_kernel_read() can fail in which case we forward to call
ahash_request_free() on a currently running request. We have to wait
for its completion before we can free the request.
This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0
cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If the IMA template contains the "modsig" or "d-modsig" field, then the
modsig should be added to the measurement list when the file is appraised.
And that is what normally happens, but if a measurement rule caused a file
containing a modsig to be measured before a different rule causes it to be
appraised, the resulting measurement entry will not contain the modsig
because it is only fetched during appraisal. When the appraisal rule
triggers, it won't store a new measurement containing the modsig because
the file was already measured.
We need to detect that situation and store an additional measurement with
the modsig. This is done by adding an IMA_MEASURE action flag if we read a
modsig and the IMA template contains a modsig field.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Define new "d-modsig" template field which holds the digest that is
expected to match the one contained in the modsig, and also new "modsig"
template field which holds the appended file signature.
Add a new "ima-modsig" defined template descriptor with the new fields as
well as the ones from the "ima-sig" descriptor.
Change ima_store_measurement() to accept a struct modsig * argument so that
it can be passed along to the templates via struct ima_event_data.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Obtain the modsig and calculate its corresponding hash in
ima_collect_measurement().
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Implement the appraise_type=imasig|modsig option, allowing IMA to read and
verify modsig signatures.
In case a file has both an xattr signature and an appended modsig, IMA will
only use the appended signature if the key used by the xattr signature
isn't present in the IMA or platform keyring.
Because modsig verification needs to convert from an integrity keyring id
to the keyring itself, add an integrity_keyring_from_id() function in
digsig.c so that integrity_modsig_verify() can use it.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Verify xattr signature in a separate function so that the logic in
ima_appraise_measurement() remains clear when it gains the ability to also
verify an appended module signature.
The code in the switch statement is unchanged except for having to
dereference the status and cause variables (since they're now pointers),
and fixing the style of a block comment to appease checkpatch.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce the modsig keyword to the IMA policy syntax to specify that
a given hook should expect the file to have the IMA signature appended
to it. Here is how it can be used in a rule:
appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig
With this rule, IMA will accept either a signature stored in the extended
attribute or an appended signature.
For now, the rule above will behave exactly the same as if
appraise_type=imasig was specified. The actual modsig implementation
will be introduced separately.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This avoids a dependency cycle in soon-to-be-introduced
CONFIG_IMA_APPRAISE_MODSIG: it will select CONFIG_MODULE_SIG_FORMAT
which in turn selects CONFIG_KEYS. Kconfig then complains that
CONFIG_INTEGRITY_SIGNATURE depends on CONFIG_KEYS.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
IMA policy rules are walked sequentially. Depending on the ordering of
the policy rules, the "template" field might be defined in one rule, but
will be replaced by subsequent, applicable rules, even if the rule does
not explicitly define the "template" field.
This patch initializes the "template" once and only replaces the
"template", when explicitly defined.
Fixes: 19453ce0bc ("IMA: support for per policy rule template formats")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull integrity updates from Mimi Zohar:
"Bug fixes, code clean up, and new features:
- IMA policy rules can be defined in terms of LSM labels, making the
IMA policy dependent on LSM policy label changes, in particular LSM
label deletions. The new environment, in which IMA-appraisal is
being used, frequently updates the LSM policy and permits LSM label
deletions.
- Prevent an mmap'ed shared file opened for write from also being
mmap'ed execute. In the long term, making this and other similar
changes at the VFS layer would be preferable.
- The IMA per policy rule template format support is needed for a
couple of new/proposed features (eg. kexec boot command line
measurement, appended signatures, and VFS provided file hashes).
- Other than the "boot-aggregate" record in the IMA measuremeent
list, all other measurements are of file data. Measuring and
storing the kexec boot command line in the IMA measurement list is
the first buffer based measurement included in the measurement
list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Introduce struct evm_xattr
ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition
KEXEC: Call ima_kexec_cmdline to measure the boot command line args
IMA: Define a new template field buf
IMA: Define a new hook to measure the kexec boot command line arguments
IMA: support for per policy rule template formats
integrity: Fix __integrity_init_keyring() section mismatch
ima: Use designated initializers for struct ima_event_data
ima: use the lsm policy update notifier
LSM: switch to blocking policy update notifiers
x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY
ima: Make arch_policy_entry static
ima: prevent a file already mmap'ed write to be mmap'ed execute
x86/ima: check EFI SetupMode too
-----BEGIN PGP SIGNATURE-----
iQIVAwUAXRyyVvu3V2unywtrAQL3xQ//eifjlELkRAPm2EReWwwahdM+9QL/0bAy
e8eAzP9EaphQGUhpIzM9Y7Cx+a8XW2xACljY8hEFGyxXhDMoLa35oSoJOeay6vQt
QcgWnDYsET8Z7HOsFCP3ZQqlbbqfsB6CbIKtZoEkZ8ib7eXpYcy1qTydu7wqrl4A
AaJalAhlUKKUx9hkGGJTh2xvgmxgSJkxx3cNEWJQ2uGgY/ustBpqqT4iwFDsgA/q
fcYTQFfNQBsC8/SmvQgxJSc+reUdQdp0z1vd8qjpSdFFcTq1qOtK0qDdz1Bbyl24
hAxvNM1KKav83C8aF7oHhEwLrkD+XiYKixdEiCJJp+A2i+vy2v8JnfgtFTpTgLNK
5xu2VmaiWmee9SLCiDIBKE4Ghtkr8DQ/5cKFCwthT8GXgQUtdsdwAaT3bWdCNfRm
DqgU/AyyXhoHXrUM25tPeF3hZuDn2yy6b1TbKA9GCpu5TtznZIHju40Px/XMIpQH
8d6s/pg+u/SnkhjYWaTvTcvsQ2FB/vZY/UzAVyosnoMBkVfL4UtAHGbb8FBVj1nf
Dv5VjSjl4vFjgOr3jygEAeD2cJ7L6jyKbtC/jo4dnOmPrSRShIjvfSU04L3z7FZS
XFjMmGb2Jj8a7vAGFmsJdwmIXZ1uoTwX56DbpNL88eCgZWFPGKU7TisdIWAmJj8U
N9wholjHJgw=
=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
-----BEGIN PGP SIGNATURE-----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=Push
-----END PGP SIGNATURE-----
Merge tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
Even though struct evm_ima_xattr_data includes a fixed-size array to hold a
SHA1 digest, most of the code ignores the array and uses the struct to mean
"type indicator followed by data of unspecified size" and tracks the real
size of what the struct represents in a separate length variable.
The only exception to that is the EVM code, which correctly uses the
definition of struct evm_ima_xattr_data.
So make this explicit in the code by removing the length specification from
the array in struct evm_ima_xattr_data. Also, change the name of the
element from digest to data since in most places the array doesn't hold a
digest.
A separate struct evm_xattr is introduced, with the original definition of
evm_ima_xattr_data to be used in the places that actually expect that
definition, specifically the EVM HMAC code.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
MAX_TEMPLATE_NAME_LEN is used when restoring measurements carried over from
a kexec. It should be set to the length of a template containing all fields
except for 'd' and 'n', which don't need to be accounted for since they
shouldn't be defined in the same template description as 'd-ng' and 'n-ng'.
That length is greater than the current 15, so update using a sizeof() to
show where the number comes from and also can be visually shown to be
correct. The sizeof() is calculated at compile time.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
A buffer(kexec boot command line arguments) measured into IMA
measuremnt list cannot be appraised, without already being
aware of the buffer contents. Since hashes are non-reversible,
raw buffer is needed for validation or regenerating hash for
appraisal/attestation.
Add support to store/read the buffer contents in HEX.
The kexec cmdline hash is stored in the "d-ng" field of the
template data. It can be verified using
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements |
grep kexec-cmdline | cut -d' ' -f 6 | xxd -r -p | sha256sum
- Add two new fields to ima_event_data to hold the buf and
buf_len
- Add a new template field 'buf' to be used to store/read
the buffer data.
- Updated process_buffer_meaurement to add the buffer to
ima_event_data. process_buffer_measurement added in
"Define a new IMA hook to measure the boot command line
arguments"
- Add a new template policy name ima-buf to represent
'd-ng|n-ng|buf'
Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a 'recurse' flag for keyring searches so that the flag can be omitted
and recursion disabled, thereby allowing just the nominated keyring to be
searched and none of the children.
Signed-off-by: David Howells <dhowells@redhat.com>
Currently during soft reboot(kexec_file_load) boot command line
arguments are not measured. Define hooks needed to measure kexec
command line arguments during soft reboot(kexec_file_load).
- A new ima hook ima_kexec_cmdline is defined to be called by the
kexec code.
- A new function process_buffer_measurement is defined to measure
the buffer hash into the IMA measurement list.
- A new func policy KEXEC_CMDLINE is defined to control the
measurement.
Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Admins may wish to log different measurements using different IMA
templates. Add support for overriding the default template on a per-rule
basis.
Inspired-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
With gcc-4.6.3:
WARNING: vmlinux.o(.text.unlikely+0x24c64): Section mismatch in reference from the function __integrity_init_keyring() to the function .init.text:set_platform_trusted_keys()
The function __integrity_init_keyring() references
the function __init set_platform_trusted_keys().
This is often because __integrity_init_keyring lacks a __init
annotation or the annotation of set_platform_trusted_keys is wrong.
Indeed, if the compiler decides not to inline __integrity_init_keyring(),
a warning is issued.
Fix this by adding the missing __init annotation.
Fixes: 9dc92c4517 ("integrity: Define a trusted platform keyring")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Designated initializers allow specifying only the members of the struct
that need initialization. Non-mentioned members are initialized to zero.
This makes the code a bit clearer (particularly in ima_add_boot_aggregate)
and also allows adding a new member to the struct without having to update
all struct initializations.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Don't do lazy policy updates while running the rule matching,
run the updates as they happen.
Depends on commit f242064c5df3 ("LSM: switch to blocking policy update notifiers")
Signed-off-by: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If enabled, ima arch specific policies always adds the measurements rules,
this makes it dependent on CONFIG_IMA. CONFIG_IMA_APPRAISE implicitly takes
care of this, however it is needed explicitly for CONFIG_KEXEC_VERIFY_SIG.
This patch adds the CONFIG_IMA dependency in combination with
CONFIG_KEXEC_VERIFY_SIG for CONFIG_IMA_ARCH_POLICY
Fixes: d958083a8f (x86/ima: define arch_get_ima_policy() for x86)
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Fix sparse warning:
security/integrity/ima/ima_policy.c:202:23: warning:
symbol 'arch_policy_entry' was not declared. Should it be static?
Fixes: 6191706246 ("ima: add support for arch specific policies")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org (linux-5.0)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel calls deny_write_access() to prevent a file already opened
for write from being executed and also prevents files being executed
from being opened for write. For some reason this does not extend to
files being mmap'ed execute.
From an IMA perspective, measuring/appraising the integrity of a file
being mmap'ed shared execute, without first making sure the file cannot
be modified, makes no sense. This patch prevents files, in policy,
already mmap'ed shared write, from being mmap'ed execute.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull integrity subsystem fixes from Mimi Zohar:
"Four bug fixes, none 5.2-specific, all marked for stable.
The first two are related to the architecture specific IMA policy
support. The other two patches, one is related to EVM signatures,
based on additional hash algorithms, and the other is related to
displaying the IMA policy"
* 'next-fixes-for-5.2-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: show rules with IMA_INMASK correctly
evm: check hash algorithm passed to init_desc()
ima: fix wrong signed policy requirement when not appraising
x86/ima: Check EFI_RUNTIME_SERVICES before using
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Show the '^' character when a policy rule has flag IMA_INMASK.
Fixes: 80eae209d6 ("IMA: allow reading back the current IMA policy")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This patch prevents memory access beyond the evm_tfm array by checking the
validity of the index (hash algorithm) passed to init_desc(). The hash
algorithm can be arbitrarily set if the security.ima xattr type is not
EVM_XATTR_HMAC.
Fixes: 5feeb61183 ("evm: Allow non-SHA1 digital signatures")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Ard Biesheuvel