This parameter has never been used. Remove it to simplify the function.
Link: https://lore.kernel.org/r/20220922123315.3732205-8-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As hns_roce_init_hem_table() is always called with use_lowmem
being '1', and table->lowmem is set according to that argument,
so remove table->lowmem too.
Also, as the table->lowmem is used to indicate a dma buffer
is allocated with GFP_HIGHUSER or GFP_KERNEL, and calling
dma_alloc_coherent() with GFP_KERNEL seems like a common
pattern.
Link: https://lore.kernel.org/r/20220922123315.3732205-7-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'bt_level' parameter is not used in hem_list_alloc_item(),
so remove it.
Link: https://lore.kernel.org/r/20220922123315.3732205-6-xuhaoyue1@hisilicon.com
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In include/uapi/rdma/rdma_user_rxe.h there are redundant copies of num_sge
in the rxe_send_wr, rxe_recv_wqe, and rxe_dma_info. Only the ones in
rxe_dma_info are actually used by the rxe kernel driver.
The userspace would set these values, but the kernel never read them.
This change has no affect on the current ABI and new or old versions of
rdma-core operate correctly with new or old versions of the kernel rxe
driver.
Link: https://lore.kernel.org/r/20220913222716.18335-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
For mlx5 if ATS is enabled in the PCI config then the device will use ATS
requests for only certain DMA operations. This has to be opted in by the
SW side based on the mkey or umem settings.
ATS slows down the PCI performance, so it should only be set in cases when
it is needed. All of these cases revolve around optimizing PCI P2P
transfers and avoiding bad cases where the bus just doesn't work.
Link: https://lore.kernel.org/r/4-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is modeled after the similar EFA enablement in commit
66f4817b57 ("RDMA/efa: Add support for dmabuf memory regions").
Like EFA there is no support for revocation so we simply call the
ib_umem_dmabuf_get_pinned() to obtain a umem instead of the normal
ib_umem_get(). Everything else stays the same.
Link: https://lore.kernel.org/r/3-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This uses the same passing protocol as UVERBS_ATTR_FD (eg len = 0 data_s64
= fd), except that the FD is not required to be a uverbs object and the
core code does not covert the FD to an object handle automatically.
Access to the int fd is provided by uverbs_get_raw_fd().
Link: https://lore.kernel.org/r/2-v1-bd147097458e+ede-umem_dmabuf_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently in resize_finish() in rxe_queue.c there is a loop which copies
the entries in the original queue into a newly allocated queue. The
termination logic for this loop is incorrect. The call to
queue_next_index() updates cons but has no effect on whether the queue is
empty. So if the queue starts out empty nothing is copied but if it is not
then the loop will run forever. This patch changes the loop to compare the
value of cons to the original producer index.
Fixes: ae6e843fe0 ("RDMA/rxe: Add memory barriers to kernel queues")
Link: https://lore.kernel.org/r/20220825221446.6512-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move setting of pd in mr objects ahead of any possible errors so that it
will always be set in rxe_mr_cleanup() to avoid seg faults when
rxe_put(mr_pd(mr)) is called.
Fixes: cf40367961 ("RDMA/rxe: Move mr cleanup code to rxe_mr_cleanup()")
Link: https://lore.kernel.org/r/20220805183153.32007-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Most code in send_ack() and send_atomic_ack() are duplicate, move them to
a new helper send_common_ack().
In newer IBA spec, some opcodes require acknowledge with a zero-length
read response, with this new helper, we can easily implement it later.
Link: https://lore.kernel.org/r/1659335010-2-1-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
"&srq->pd->usecnt" and "&pd->usecnt" are different names for the same
reference count. Use "&pd->usecnt" consistently for both the increment
and decrement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YyxFe3Pm0uzRuBkQ@kili
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently ib_srp module does not support devices with more than 256
ports. Switch from u8 to u32 to fix the problem.
Fixes: 1fb7f8973f ("RDMA: Support more than 255 rdma ports")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Mikhael Goikhman <migo@nvidia.com>
Link: https://lore.kernel.org/r/7d80d8844f1abb3a54170b7259f0a02be38080a6.1663747327.git.leonro@nvidia.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rxe_mr and ib_mr have interchangeable members. Remove device specific
members and use ones in the generic struct. Both 'iova' and 'length' are
filled in ib_uverbs or ib_core layer after MR registration.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes: 04c0a5fcfc ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In inter-subnet cases, when inbound/outbound PRs are available,
outbound_PR.dlid is used as the requestor's datapath DLID and
inbound_PR.dlid is used as the responder's DLID. The inbound_PR.dlid
is passed to responder side with the "ConnectReq.Primary_Local_Port_LID"
field. With this solution the PERMISSIVE_LID is no longer used in
Primary Local LID field.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/b3f6cac685bce9dde37c610be82e2c19d9e51d9e.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The responder should always use WC's SLID as the dlid, to follow the
IB SPEC section "13.5.4.2 COMMON RESPONSE ACTIONS":
A responder always takes the following actions in constructing a
response packet:
- The SLID of the received packet is used as the DLID in the response
packet.
Fixes: ac3a949fb2 ("IB/CM: Set appropriate slid and dlid when handling CM request")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/cd17c240231e059d2fc07c17dfe555d548b917eb.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Support receiving inbound and outbound IB path records (along with GMP
PathRecord) from user-space service through the RDMA netlink channel.
The LIDs in these 3 PRs can be used in this way:
1. GMP PR: used as the standard local/remote LIDs;
2. DLID of outbound PR: Used as the "dlid" field for outbound traffic;
3. DLID of inbound PR: Used as the "dlid" field for outbound traffic in
responder side.
This is aimed to support adaptive routing. With current IB routing
solution when a packet goes out it's assigned with a fixed DLID per
target, meaning a fixed router will be used.
The LIDs in inbound/outbound path records can be used to identify group
of routers that allow communication with another subnet's entity. With
them packets from an inter-subnet connection may travel through any
router in the set to reach the target.
As confirmed with Jason, when sending a netlink request, kernel uses
LS_RESOLVE_PATH_USE_ALL so that the service knows kernel supports
multiple PRs.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/2fa2b6c93c4c16c8915bac3cfc4f27be1d60519d.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This fields means the total number of primary and alternative paths,
i.e.,:
0 - No primary nor alternate path is available;
1 - Only primary path is available;
2 - Both primary and alternate path are available.
Rename it to avoid confusion as with follow patches primary path will
support multiple path records.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/cbe424de63a56207870d70c5edce7c68e45f429e.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Delay QP destroy completion until all siw references to QP are
dropped. The calling RDMA core will free QP structure after
successful return from siw_qp_destroy() call, so siw must not
hold any remaining reference to the QP upon return.
A use-after-free was encountered in xfstest generic/460, while
testing NFSoRDMA. Here, after a TCP connection drop by peer,
the triggered siw_cm_work_handler got delayed until after
QP destroy call, referencing a QP which has already freed.
Fixes: 303ae1cdfd ("rdma/siw: application interface")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920082503.224189-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
rc_only_opcode and uc_only_opcode have been removed since
commit b374e060cc ("IB/hfi1: Consolidate pio control masks
into single definition"), so remove them.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220911092325.3216513-1-cuigaosheng1@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In preparation for FORTIFY_SOURCE performing run-time destination buffer
bounds checking for memcpy(), specify the destination output buffer
explicitly, instead of asking memcpy() to write past the end of what looked
like a fixed-size object.
Notice that srp_rsp[] is a pointer to a structure that contains
flexible-array member data[]:
struct srp_rsp {
...
__be32 sense_data_len;
__be32 resp_data_len;
u8 data[];
};
link: https://github.com/KSPP/linux/issues/201
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220909022943.8896-1-hbh25y@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some opcodes are used in hardware internally, and driver does not care
about them. So, we change them to reserved opcodes in driver.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220909093822.33868-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Many of erdma's includes are redundant, because they are already included
indirectly by kernel headers or custom headers. So we remove all the
unnecessary direct-includes. Besides, add linux/pci.h to erdma.h because
it's also used in the file.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220909093822.33868-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
erdma_post_cmd_wait does not use the 'u64 *req' input parameter directly.
So it is better to define it to 'void *req', and by this we can eliminate
the casting when calling erdma_post_cmd_wait.
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220909093822.33868-2-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix the code for converting a SCSI command pointer into an SRP request
pointer.
Cc: Xiao Yang <yangx.jy@fujitsu.com>
Fixes: ad215aaea4 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220908233139.3042628-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently ib_copy_from_udata and ib_copy_to_udata could underfill
the request and response buffer if the user-space passes an undersized
value for udata->inlen or udata->outlen respectively [1]
This could lead to undesirable behavior.
Zero initing the buffer only goes as far as preventing using the buffer
uninitialized.
Validate udata->inlen and udata->outlen passed from user-space to ensure
they are at least the required minimum size.
[1] https://lore.kernel.org/linux-rdma/MWHPR11MB0029F37D40D9D4A993F8F549E9D79@MWHPR11MB0029.namprd11.prod.outlook.com/
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A number of asynchronous event (AE) ids were not aligned to the
correct flush_code and event_type. Fix these up so that the
correct IBV error and event codes are returned to application.
Also, add handling for new AE ids like IRDMA_AE_INVALID_REQUEST to
return the correct WC error code.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Return the value set_link_state() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220901074209.313004-1-ye.xingchen@zte.com.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Query eswitch functions returns information of the external host
PF(if it exists). It can be used to check if DEVX is running on ECPF.
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Link: https://lore.kernel.org/r/4265925178ab3224dc1d3e3784bb312d808edca5.1661763785.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The SoftiWARP Kconfig is missing "select" for CRYPTO and CRYPTO_CRC32C.
In addition, it improperly "depends on" LIBCRC32C, this should be a
"select", similar to net/sctp and others. As a dependency, SIW fails
to appear in generic configurations.
Link: https://lore.kernel.org/r/d366bf02-3271-754f-fc68-1a84016d0e19@talpey.com
Signed-off-by: Tom Talpey <tom@talpey.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
An incoming Read request causes multiple Read responses. If a user MR to
copy data from is unavailable or responder cannot send a reply, then the
error messages can be printed for each response attempt, resulting in
message overflow.
Link: https://lore.kernel.org/r/20220829071218.1639065-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The member variable obj in struct rxe_task is not needed.
So remove it to save memory.
Link: https://lore.kernel.org/r/20220822011615.805603-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Chengchang Tang