The available registers for --int-regs and --user-regs may be different,
e.g. XMM registers.
Split parse_regs into two dedicated functions for --int-regs and
--user-regs respectively.
Modify the warning message. "--user-regs=?" should be applied to show
the available registers for --user-regs.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1557865174-56264-1-git-send-email-kan.liang@linux.intel.com
[ Changed docs as suggested by Ravi and agreed by Kan ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Cortex-A57 and Cortex-A72 both support all ARMv8 recommended events
up to the RC_ST_SPEC (0x91) event with the exception of:
- L1D_CACHE_REFILL_INNER (0x44)
- L1D_CACHE_REFILL_OUTER (0x45)
- L1D_TLB_RD (0x4E)
- L1D_TLB_WR (0x4F)
- L2D_TLB_REFILL_RD (0x5C)
- L2D_TLB_REFILL_WR (0x5D)
- L2D_TLB_RD (0x5E)
- L2D_TLB_WR (0x5F)
- STREX_SPEC (0x6F)
Create an appropriate JSON file for mapping those events and update the
mapfile.csv for matching the Cortex-A57 and Cortex-A72 MIDR to that
file.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean V Kelley <seanvk.dev@oregontracks.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated list:arm pmu profiling and debugging)
Link: http://lkml.kernel.org/r/20190513202522.9050-4-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Broadcom's Brahma-B53 CPUs support the same type of events that the
Cortex-A53 supports, recognize its CPUID and map it to the cortex-a53
events.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean V Kelley <seanvk.dev@oregontracks.org>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org (moderated list
Link: http://lkml.kernel.org/r/20190513202522.9050-3-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ARM64's implementation of get_cpuidr_str() masks out the revision bits
[3:0] while reading the CPU identifier, there is no need for the
[[:xdigit:]] wildcard.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean V Kelley <seanvk.dev@oregontracks.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated list:arm pmu profiling and debugging)
Link: http://lkml.kernel.org/r/20190513202522.9050-2-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The shell tests should not redirect useful output to /dev/null, as that
is done automatically by 'perf test' in non verbose mode, so remove that
from the zstd comp/decomp test, fixing up verbose mode.
Before:
$ perf test zstd
68: Zstd perf.data compression/decompression : Ok
$ perf test -v zstd
68: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 11956
-z, --compression-level[=<n>]
Collecting compressed record file:
Checking compressed events stats:
test child finished with 0
---- end ----
Zstd perf.data compression/decompression: Ok
$
Now:
$ perf test zstd
68: Zstd perf.data compression/decompression : Ok
$ perf test -v zstd
68: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 12695
Collecting compressed record file:
0+500 records in
72+1 records out
37361 bytes (37 kB, 36 KiB) copied, 9.83796 s, 3.8 kB/s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB /tmp/perf.data.rzq, compressed (original 0.004 MB, ratio is 3.679) ]
Checking compressed events stats:
# compressed : Zstd, level = 1, ratio = 4
COMPRESSED events: 3
test child finished with 0
---- end ----
Zstd perf.data compression/decompression: Ok
$
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-tp96618ds42zic94nlh0msz3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a basic integration test for Zstd based record
compression/decompression using 'perf record' and 'perf report'.
Committer notes:
Reduce a bit the freq (from 25 kHz to 5 kHz) and the number of /dev/null
records read (from 1000 to 500), reducing the time it takes to something
more in line with the time existing 'perf test' entries take to run.
With that in place:
$ time perf test zstd
68: Zstd perf.data compression/decompression : Ok
real 0m10.376s
user 0m0.105s
sys 0m0.440s
$ grep "model name" /proc/cpuinfo | head -1
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/dc007ae4-104a-2b7c-316e-275929025f0d@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initialized decompression part of Zstd based API so COMPRESSED records
would be decompressed into the resulting output data file.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c27d7500-ecdd-3569-cab5-8f70bbed5ea4@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.
The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).
After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.
When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.
Committer notes:
Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:
$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163
#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implemented -z,--compression_level[=<n>] option that enables compression
of mmaped kernel data buffers content in runtime during perf record mode
collection. Default option value is 1 (fastest compression).
Compression overhead has been measured for serial and AIO streaming when
profiling matrix multiplication workload:
-------------------------------------------------------------
| SERIAL | AIO-1 |
----------------------------------------------------------------|
|-z | OVH(x) | ratio(x) size(MiB) | OVH(x) | ratio(x) size(MiB) |
|---------------------------------------------------------------|
| 0 | 1,00 | 1,000 179,424 | 1,00 | 1,000 187,527 |
| 1 | 1,04 | 8,427 181,148 | 1,01 | 8,474 188,562 |
| 2 | 1,07 | 8,055 186,953 | 1,03 | 7,912 191,773 |
| 3 | 1,04 | 8,283 181,908 | 1,03 | 8,220 191,078 |
| 5 | 1,09 | 8,101 187,705 | 1,05 | 7,780 190,065 |
| 8 | 1,05 | 9,217 179,191 | 1,12 | 6,111 193,024 |
-----------------------------------------------------------------
OVH = (Execution time with -z N) / (Execution time with -z 0)
ratio - compression ratio
size - number of bytes that was compressed
size ~= trace size x ratio
Committer notes:
Testing it I noticed that it failed to disable build id processing when
compression is enabled, and as we'd have to uncompress everything to
look for the PERF_RECORD_{MMAP,SAMPLE,etc} to figure out which build ids
to read from DSOs, we better disable build id processing when
compression is enabled, logging with pr_debug() when doing so:
Original patch:
# perf record -z2
^C[ perf record: Woken up 1 times to write data ]
0x1746e0 [0x76]: failed to process type: 81 [Invalid argument]
[ perf record: Captured and wrote 1.568 MB perf.data, compressed (original 0.452 MB, ratio is 3.995) ]
#
After auto-disabling build id processing when compression is enabled:
$ perf record -z2 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data, compressed (original 0.001 MB, ratio is 2.292) ]
$ perf record -v -z2 sleep 1
Compression enabled, disabling build id collection at the end of the session.
<SNIP extra -v pr_debug() messages>
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data, compressed (original 0.001 MB, ratio is 2.305) ]
$
Also, with parts of the patch originally after this one moved to just
before this one we get:
$ perf record -z2 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data, compressed (original 0.001 MB, ratio is 2.371) ]
$ perf report -D | grep COMPRESS
0 0x1b8 [0x155]: PERF_RECORD_COMPRESSED: unhandled!
0 0x30d [0x80]: PERF_RECORD_COMPRESSED: unhandled!
COMPRESSED events: 2
COMPRESSED events: 0
$
I.e. when faced with PERF_RECORD_COMPRESSED that we still have no code
to process, we just show it as not being handled, skip them and
continue, while before we had:
$ perf report -D | grep COMPRESS
0x1b8 [0x169]: failed to process type: 81 [Invalid argument]
Error:
failed to process sample
0 0x1b8 [0x169]: PERF_RECORD_COMPRESSED
$
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/9ff06518-ae63-a908-e44d-5d9e56dd66d9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Committer note:
Split from a larger patch, this only dumps PERF_RECORD_COMPRESSED as
unhandled, so that when we introduce the record part in the next patch,
we don't see unhandled events when using 'perf record -D'.
Changed it so that we dump the event if the handler is just a stub, i.e.
for the case where we don't have ZSTD linked but we're processing a
perf.data file generated by a tool with that linked.
Also when failing to decompress we can't just dump the uncompressed
event and return 0, we have to propagate the error.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compression is implemented using the functions from zstd.c. As the memory
to operate on the compression uses mmap->aio.data[] buffers. If Zstd
streaming compression API fails for some reason the data to be compressed
are just copied into the memory buffers using plain memcpy().
Compressed trace frame consists of an array of PERF_RECORD_COMPRESSED
records. Each element of the array is not longer that PERF_SAMPLE_MAX_SIZE
and consists of perf_event_header followed by the compressed chunk
that is decompressed on the loading stage.
perf_mmap__aio_push() is replaced by perf_mmap__push() which is now used
in the both serial and AIO streaming cases. perf_mmap__push() is extended
with positive return values to signify absence of data ready for
processing.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/77db2b2c-5d03-dbb0-aeac-c4dd92129ab9@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compression is implemented using the functions from zstd.c. As the
memory to operate on the compression uses mmap->data buffer.
If Zstd streaming compression API fails for some reason the data to be
compressed are just copied into the memory buffers using plain memcpy().
Compressed trace frame consists of an array of PERF_RECORD_COMPRESSED
records. Each element of the array is not longer that
PERF_SAMPLE_MAX_SIZE and consists of perf_event_header followed by the
compressed chunk that is decompressed on the loading stage.
Comitter notes:
Undo some unnecessary line breaks, remove some unnecessary () around
zstd_data to then just get its address, and fix conflicts with
BPF_PROG_INFO/BPF_BTF patchkits.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/744df43f-3932-2594-ddef-1e99a3cad03a@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implemented functions are based on Zstd streaming compression API.
The functions are used in runtime to compress data that come from mmaped
kernel buffer. zstd_init(), zstd_fini() are used for initialization and
finalization to allocate and deallocate internal zstd objects.
zstd_compress_stream_to_records() is used to convert parts of mmaped
kernel buffer into an array of PERF_RECORD_COMPRESSED records.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/18bf36f3-b85a-1fe2-dd83-10e0c6069568@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implemented mmap data buffer that is used as the memory to operate
on when compressing data in case of serial trace streaming.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/49b31321-0f70-392b-9a4f-649d3affe090@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implemented PERF_RECORD_COMPRESSED event, related data types, header
feature and functions to write, read and print feature attributes from
the trace header section.
comp_mmap_len preserves the size of mmaped kernel buffer that was used
during collection. comp_mmap_len size is used on loading stage as the
size of decomp buffer for decompression of COMPRESSED events content.
Committer notes:
Fixed up conflict with BPF_PROG_INFO and BTF_BTF header features.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ebbaf031-8dda-3864-ebc6-7922d43ee515@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define 'bytes_transferred' and 'bytes_compressed' metrics to calculate
ratio in the end of the data collection:
compression ratio = bytes_transferred / bytes_compressed
The 'bytes_transferred' metric accumulates the amount of bytes that was
extracted from the mmaped kernel buffers for compression, while
'bytes_compressed' accumulates the amount of bytes that was received
after applying compression.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1d4bf499-cb03-26dc-6fc6-f14fec7622ce@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can test the ifdef parts for this feature.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-7o65mfl10wlvm8v3f0ombxd1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Initial support for libtraceevent man pages - Documentation directory,
templates, configurations, Makefiles.
The first man page is also part of the patch - summary of the library
and all its APIs.
Building of the documentation is integrated into the libtraceevent build
process, new targets are added to its Makefile:
make help
make doc
make doc-clean
make doc-install
make doc-uninstall
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/linux-trace-devel/20190503091119.23399-2-tstoyanov@vmware.com
Link: http://lkml.kernel.org/r/20190510200106.104812629@goodmis.org
[ Replaced tracefs tracing/events to tracefs events in DESCRIPTION section ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If fgets() fails due to any other error besides end-of-file, the version
char array may not even be null-terminated.
Signed-off-by: Donald Yandt <donald.yandt@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Fixes: a1645ce12a ("perf: 'perf kvm' tool for monitoring guest performance from host")
Link: http://lkml.kernel.org/r/20190514110100.22019-1-donald.yandt@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf cannot parse UPI (Intel's "Ultra Path Interconnect" [1]) events.
# perf stat -e UPI_DATA_BANDWIDTH_TX
event syntax error: 'UPI_DATA_BANDWIDTH_TX'
\___ parser error
Run 'perf list' for a list of valid events
The JSON lists call the box UPI LL, while perf calls it upi. Add
conversion support to JSON to convert the unit properly.
Committer notes:
[1] https://en.wikipedia.org/wiki/Intel_Ultra_Path_Interconnect
"The Intel Ultra Path Interconnect (UPI) is a point-to-point processor
interconnect developed by Intel which replaced the Intel QuickPath
Interconnect (QPI) in Xeon Skylake-SP platforms starting in 2017.
UPI is a low-latency coherent interconnect for scalable multiprocessor
systems with a shared address space. It uses a directory-based home
snoop coherency protocol with a transfer speed of up to 10.4 GT/s.
Supporting processors typically have two or three UPI links."
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1557234991-130456-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With support for Python 2 or 3 and PySide 1 or 2 (Qt 4 or 5), it is
useful to see what versions are in use. Add an 'About' dialog box that
displays Python, PySide, Qt and database server (SQLite or PostgreSQL)
version numbers.
Committer testing:
$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db
Then go to 'Help', then 'About', select all the lines with the mouse
press 'Control+C', then, on the same terminal press control+shift+V
which shows my current environment:
Python version: 2.7.16
PySide version: 1
Qt version: 4.8.7
SQLite version: 3.26.0
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190503120828.25326-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a context menu (right-click) that provides options for copying to
clipboard, including, for trees, the ability to copy only the cell under
the mouse pointer.
Committer testing:
$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db
Simply right click and pick "Copy selection", that at this point has
just the first line, not expanded, then see what was copied by pressing
shift+control+v on a terminal:
Call Path,Object,Count,Time (ns),Time (%),Branch Count,Branch Count (%)
▶ simple-retpolin,,,,,,
Ditto after expanding, i.e. the selection continues to be just one
line:
Call Path Object Count Time (ns) Time (%) Branch Count Branch Count (%)
▼ simple-retpolin
Now select all the lines with the mouse and control+shift+v again:
Call Path Object Count Time (ns) Time (%) Branch Count Branch Count (%)
▼ 14503:14503
▼ _start ld-2.28.so 1 156267 100.0 10602 100.0
▶ unknown unknown 1 2276 1.5 1 0.0
▶ _dl_start ld-2.28.so 1 137047 87.7 10088 95.2
▶ _dl_init ld-2.28.so 1 9142 5.9 326 3.1
▼ _start simple-retpoline 1 7457 4.8 182 1.7
▶ unknown unknown 1 805 10.8 1 0.5
▶ __libc_start_main libc-2.28.so 1 6347 85.1 179 98.4
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190503120828.25326-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As preparation for adding support for copying to clipboard, keep track of
what level each item is in tree items.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190503120828.25326-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang