Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.
Sylwester corrects a check on source IP address when validating destination
for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================
Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson says:
====================
ionic: bug fixes
These are a couple of maintenance bug fixes for the Pensando ionic
networking driver.
Mohamed takes care of a "plays well with others" issue where the
VF spec is a bit vague on VF mac addresses, but certain customers
have come to expect behavior based on other vendor drivers.
Shannon addresses a couple of corner cases seen in internal
stress testing.
====================
Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers. Handle the errors
where the older firmware does not allow the VF to set its own
station address.
Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.
Fixes: fbb39807e9 ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <mohamed@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix three bugs in the rxrpc's sendmsg implementation:
(1) rxrpc_new_client_call() should release the socket lock when returning
an error from rxrpc_get_call_slot().
(2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
held in the event that we're interrupted by a signal whilst waiting
for tx space on the socket or relocking the call mutex afterwards.
Fix this by: (a) moving the unlock/lock of the call mutex up to
rxrpc_send_data() such that the lock is not held around all of
rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
whether we're return with the lock dropped. Note that this means
recvmsg() will not block on this call whilst we're waiting.
(3) After dropping and regaining the call mutex, rxrpc_send_data() needs
to go and recheck the state of the tx_pending buffer and the
tx_total_len check in case we raced with another sendmsg() on the same
call.
Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait
for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.
Without fix (2), something like the following can be induced:
WARNING: bad unlock balance detected!
5.16.0-rc6-syzkaller #0 Not tainted
-------------------------------------
syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
but there are no more locks to release!
other info that might help us debug this:
no locks held by syz-executor011/3597.
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
__lock_release kernel/locking/lockdep.c:5306 [inline]
lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
__mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
___sys_sendmsg+0xf3/0x170 net/socket.c:2463
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
deadlock") in the previous fix pull required cgroup core to grab
cpus_read_lock() before invoking ->attach(). Unfortunately, it missed adding
cpus_read_lock() in cgroup_attach_task_all(). Fix it.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYwe0GA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGee0AP9jrsUgnmis/PzqyyPlkD95rRSDyyUNjMjfHnJe
HW+YbgD/XcEo1eJvijqP1g/ZJhRKQl6vA1JSMgnL9obc3wNpGg8=
=7LzT
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull another cgroup fix from Tejun Heo:
"Commit 4f7e723643 ("cgroup: Fix threadgroup_rwsem <->
cpus_read_lock() deadlock") required the cgroup
core to grab cpus_read_lock() before invoking ->attach().
Unfortunately, it missed adding cpus_read_lock() in
cgroup_attach_task_all(). Fix it"
* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages()
potentially with pages being NULL, leading to a NULL dereference.
Additionally lock_pages() doesn't check for pin_user_pages_fast()
having been completely successful, resulting in potentially not
locking all pages into memory. This could result in sporadic failures
when using the related memory in user mode.
Fix all of that by calling unlock_pages() always with the real number
of pinned pages, which will be zero in case pages being NULL, and by
checking the number of pages pinned by pin_user_pages_fast() matching
the expected number of pages.
Cc: <stable@vger.kernel.org>
Fixes: ab520be8cd ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP")
Reported-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20220825141918.3581-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
While reporting for the AMD retbleed vulnerability was added in
6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
the new sysfs file was not mentioned so far in the ABI documentation for
sysfs-devices-system-cpu. Fix that.
Fixes: 6b80b59b35 ("x86/bugs: Report AMD retbleed vulnerability")
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220801091529.325327-1-carnil@debian.org
Mark both the function prototype and definition as noreturn in order to
prevent the compiler from doing transformations which confuse objtool
like so:
vmlinux.o: warning: objtool: sme_enable+0x71: unreachable instruction
This triggers with gcc-12.
Add it and sev_es_terminate() to the objtool noreturn tracking array
too. Sort it while at it.
Suggested-by: Michael Matz <matz@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220824152420.20547-1-bp@alien8.de
We usually copy all bits that a request needs from the userspace for
async execution, so the userspace can keep them on the stack. However,
send zerocopy violates this pattern for addresses and may reloads it
e.g. from io-wq. Save the address if any in ->async_data as usual.
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d7512d7aa9abcd36e9afe1a4d292a24cb2d157e5.1661342812.git.asml.silence@gmail.com
[axboe: fold in incremental fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For non-protection pXd_none() page faults in do_dat_exception(), we
call do_exception() with access == (VM_READ | VM_WRITE | VM_EXEC).
In do_exception(), vma->vm_flags is checked against that before
calling handle_mm_fault().
Since commit 92f842eac7 ("[S390] store indication fault optimization"),
we call handle_mm_fault() with FAULT_FLAG_WRITE, when recognizing that
it was a write access. However, the vma flags check is still only
checking against (VM_READ | VM_WRITE | VM_EXEC), and therefore also
calling handle_mm_fault() with FAULT_FLAG_WRITE in cases where the vma
does not allow VM_WRITE.
Fix this by changing access check in do_exception() to VM_WRITE only,
when recognizing write access.
Link: https://lkml.kernel.org/r/20220811103435.188481-3-david@redhat.com
Fixes: 92f842eac7 ("[S390] store indication fault optimization")
Cc: <stable@vger.kernel.org>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The pointers for guarded storage and runtime instrumentation control
blocks are stored in the thread_struct of the associated task. These
pointers are initially copied on fork() via arch_dup_task_struct()
and then cleared via copy_thread() before fork() returns. If fork()
happens to fail after the initial task dup and before copy_thread(),
the newly allocated task and associated thread_struct memory are
freed via free_task() -> arch_release_task_struct(). This results in
a double free of the guarded storage and runtime info structs
because the fields in the failed task still refer to memory
associated with the source task.
This problem can manifest as a BUG_ON() in set_freepointer() (with
CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled)
when running trinity syscall fuzz tests on s390x. To avoid this
problem, clear the associated pointer fields in
arch_dup_task_struct() immediately after the new task is copied.
Note that the RI flag is still cleared in copy_thread() because it
resides in thread stack memory and that is where stack info is
copied.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Fixes: 8d9047f8b9 ("s390/runtime instrumentation: simplify task exit handling")
Fixes: 7b83c6297d ("s390/guarded storage: simplify task exit handling")
Cc: <stable@vger.kernel.org> # 4.15
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit c70727a5bc ("xen: allow more than 512 GB of RAM for 64 bit
pv-domains") from July 2015 replaces the config XEN_MAX_DOMAIN_MEMORY with
a new config XEN_512GB, but misses to adjust arch/x86/configs/xen.config.
As XEN_512GB defaults to yes, there is no need to explicitly set any config
in xen.config.
Just remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220817044333.22310-1-lukas.bulwahn@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit d92725256b ("mm: avoid unnecessary page fault retires on
shared memory types") modifies do_page_fault() to handle the VM_FAULT_
COMPLETED case, but forget to change for LoongArch, so fix it as other
architectures does.
Fixes: d92725256b ("mm: avoid unnecessary page fault retires on shared memory types")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu
operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We
add subword xchg/cmpxchg emulation in this patch because the emulation
has better performance than the generic implementation (on NUMA system),
and it can fix some build errors meanwhile [1].
LoongArch's guarantee for forward progress (avoid many ll/sc happening
at the same time and no one succeeds):
We have the "exclusive access (with timeout) of ll" feature to avoid
simultaneous ll (which also blocks other memory load/store on the same
address), and the "random delay of sc" feature to avoid simultaneous
sc. It is a mandatory requirement for multi-core LoongArch processors
to implement such features, only except those single-core and dual-core
processors (they also don't support multi-chip interconnection).
Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2].
[1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t
[2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfg
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When enable GENERIC_IOREMAP, there will be circular dependency to cause
build errors. The root cause is that pgtable.h shouldn't include io.h
but pgtable.h need some macros defined in io.h. So cleanup those macros
and remove the unnecessary inclusions, as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Cleanup reset routines by using new do_kernel_power_off() instead of old
pm_power_off(), and then simplify the whole file (reset.c) organization
by inlining some functions. This cleanup also fix a poweroff error if EFI
runtime is disabled.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Fix build warnings in VDSO as below:
arch/loongarch/vdso/vgettimeofday.c:9:5: warning: no previous prototype for '__vdso_clock_gettime' [-Wmissing-prototypes]
9 | int __vdso_clock_gettime(clockid_t clock,
| ^~~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:15:5: warning: no previous prototype for '__vdso_gettimeofday' [-Wmissing-prototypes]
15 | int __vdso_gettimeofday(struct __kernel_old_timeval *tv,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgettimeofday.c:21:5: warning: no previous prototype for '__vdso_clock_getres' [-Wmissing-prototypes]
21 | int __vdso_clock_getres(clockid_t clock_id,
| ^~~~~~~~~~~~~~~~~~~
arch/loongarch/vdso/vgetcpu.c:27:5: warning: no previous prototype for '__vdso_getcpu' [-Wmissing-prototypes]
27 | int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused)
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
PCI_LOONGSON is a mandatory for LoongArch and it is selected in Kconfig
unconditionally, but its dependency PCI_QUIRKS is missing and may cause
a build error when "make randconfig":
arch/loongarch/pci/acpi.c: In function 'pci_acpi_setup_ecam_mapping':
>> arch/loongarch/pci/acpi.c:103:29: error: 'loongson_pci_ecam_ops' undeclared (first use in this function)
103 | ecam_ops = &loongson_pci_ecam_ops;
| ^~~~~~~~~~~~~~~~~~~~~
arch/loongarch/pci/acpi.c:103:29: note: each undeclared identifier is reported only once for each function it appears in
Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for PCI_LOONGSON
Depends on [n]: PCI [=y] && (MACH_LOONGSON64 [=y] || COMPILE_TEST [=y]) && (OF [=y] || ACPI [=y]) && PCI_QUIRKS [=n]
Selected by [y]:
- LOONGARCH [=y]
Fix it by selecting PCI_QUIRKS unconditionally, too.
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 9230441333 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current code expects the type of the value to be an integer type,
instead the value passed to the macro is a pointer.
Ensure the size comparison uses the correct pointer type to choose the
max value, instead of using the integer type.
Fixes: 9230441333 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SMB1 server's header_preamble_size is not 0, add use is_smb1 function
to simplify the code, no actual functional changes.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's better to use MID_HEADER_SIZE because the unfolded expression
too long. No actual functional changes, minor readability improvement.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's better to use HEADER_PREAMBLE_SIZE because the unfolded expression
too long. No actual functional changes, minor readability improvement.
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Fix crash with malformed ebtables blob which do not provide all
entry points, from Florian Westphal.
2) Fix possible TCP connection clogging up with default 5-days
timeout in conntrack, from Florian.
3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian.
4) Do not allow to update implicit chains.
5) Make table handle allocation per-netns to fix data race.
6) Do not truncated payload length and offset, and checksum offset.
Instead report EINVAl.
7) Enable chain stats update via static key iff no error occurs.
8) Restrict osf expression to ip, ip6 and inet families.
9) Restrict tunnel expression to netdev family.
10) Fix crash when trying to bind again an already bound chain.
11) Flowtable garbage collector might leave behind pending work to
delete entries. This patch comes with a previous preparation patch
as dependency.
12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered,
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases
netfilter: flowtable: fix stuck flows on cleanup due to pending work
netfilter: flowtable: add function to invoke garbage collection immediately
netfilter: nf_tables: disallow binding to already bound chain
netfilter: nft_tunnel: restrict it to netdev family
netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families
netfilter: nf_tables: do not leave chain stats enabled on error
netfilter: nft_payload: do not truncate csum_offset and csum_type
netfilter: nft_payload: report ERANGE for too long offset and length
netfilter: nf_tables: make table handle allocation per-netns friendly
netfilter: nf_tables: disallow updates of implicit chain
netfilter: nft_tproxy: restrict to prerouting hook
netfilter: conntrack: work around exceeded receive window
netfilter: ebtables: reject blobs that don't provide all entry points
====================
Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c078290a2b ("selftests: include bonding tests into the kselftest
infra") adds the bonding tests in the directory:
tools/testing/selftests/drivers/net/bonding/
The file entry in MAINTAINERS for the BONDING DRIVER however refers to:
tools/testing/selftests/net/bonding/
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Repair this file entry in BONDING DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220824072945.28606-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull MD fixes from Song:
"1. Fix for clustered raid, by Guoqing Jiang.
2. req_op fix, by Bart Van Assche.
3. Fix race condition in raid recreate, by David Sloan."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1957
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
It's needed to destroy bl_curve_mutex on freeing struct fb_info since
the mutex is embedded in the structure and initialized when it's
allocated.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide error in pm2fb_check_var
Call Trace:
<TASK>
fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Jakub Kicinski