Since everybody sets kstrdup()ed constant string to "struct xattr"->name but
nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure
checking by constifying ->name member of "struct xattr".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Joel Becker <jlbec@evilplan.org> [ocfs2]
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Before modifying an EVM protected extended attribute or any other
metadata included in the HMAC calculation, the existing 'security.evm'
is verified. This patch adds calls to integrity_audit_msg() to audit
integrity metadata failures.
Reported-by: Sven Vermeulen <sven.vermeulen@siphos.be>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
EVM uses the same key for all file systems to calculate the HMAC,
making it possible to paste inodes from one file system on to another
one, without EVM being able to detect it. To prevent such an attack,
it is necessary to make the EVM HMAC file system specific.
This patch uses the file system UUID, a file system unique identifier,
to bind the EVM HMAC to the file system. The value inode->i_sb->s_uuid
is used for the HMAC hash calculation, instead of using it for deriving
the file system specific key. Initializing the key for every inode HMAC
calculation is a bit more expensive operation than adding the uuid to
the HMAC hash.
Changing the HMAC calculation method or adding additional info to the
calculation, requires existing EVM labeled file systems to be relabeled.
This patch adds a Kconfig HMAC version option for backwards compatability.
Changelog v1:
- squash "hmac version setting"
Changelog v0:
- add missing Kconfig depends (Mimi)
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
EVM cannot be built as a kernel module. Remove the unncessary __exit
functions.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
IMA currently maintains an integrity measurement list used to assert the
integrity of the running system to a third party. The IMA-appraisal
extension adds local integrity validation and enforcement of the
measurement against a "good" value stored as an extended attribute
'security.ima'. The initial methods for validating 'security.ima' are
hashed based, which provides file data integrity, and digital signature
based, which in addition to providing file data integrity, provides
authenticity.
This patch creates and maintains the 'security.ima' xattr, containing
the file data hash measurement. Protection of the xattr is provided by
EVM, if enabled and configured.
Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata
integrity and, assuming success, compares the file's current hash value
with the one stored as an extended attribute in 'security.ima'.
Changelov v4:
- changed iint cache flags to hex values
Changelog v3:
- change appraisal default for filesystems without xattr support to fail
Changelog v2:
- fix audit msg 'res' value
- removed unused 'ima_appraise=' values
Changelog v1:
- removed unused iint mutex (Dmitry Kasatkin)
- setattr hook must not reset appraised (Dmitry Kasatkin)
- evm_verifyxattr() now differentiates between no 'security.evm' xattr
(INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the
'security.evm' (INTEGRITY_NOXATTRS).
- replace hash_status with ima_status (Dmitry Kasatkin)
- re-initialize slab element ima_status on free (Dmitry Kasatkin)
- include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA
- merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin)
- removed unnecessary error variable in process_measurement() (Dmitry Kasatkin)
- use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured
(moved ima_inode_post_setattr() to ima_appraise.c)
- make sure ima_collect_measurement() can read file
Changelog:
- add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin)
- fix the race condition between chmod, which takes the i_mutex and then
iint->mutex, and ima_file_free() and process_measurement(), which take
the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin)
- cleanup of ima_appraise_measurement() (Dmitry Kasatkin)
- changes as a result of the iint not allocated for all regular files, but
only for those measured/appraised.
- don't try to appraise new/empty files
- expanded ima_appraisal description in ima/Kconfig
- IMA appraise definitions required even if IMA_APPRAISE not enabled
- add return value to ima_must_appraise() stub
- unconditionally set status = INTEGRITY_PASS *after* testing status,
not before. (Found by Joe Perches)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
This patch adds support for digital signature verification to EVM.
With this feature file metadata can be protected using digital
signature instead of an HMAC. When building an image,
which has to be flashed to different devices, an HMAC cannot
be used to sign file metadata, because the HMAC key should be
different on every device.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Before permitting 'security.evm' to be updated, 'security.evm' must
exist and be valid. In the case that there are no existing EVM protected
xattrs, it is safe for posix acls to update the mode bits.
To differentiate between no 'security.evm' xattr and no xattrs used to
calculate 'security.evm', this patch defines INTEGRITY_NOXATTR.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
The posix xattr acls are 'system' prefixed, which normally would not
affect security.evm. An interesting side affect of writing posix xattr
acls is their modifying of the i_mode, which is included in security.evm.
This patch updates security.evm when posix xattr acls are written.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
evm_protect_xattr unnecessarily validates the current security.evm
integrity, before updating non-evm protected extended attributes
and other file metadata. This patch limits validating the current
security.evm integrity to evm protected metadata.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
evm_inode_init_security() should return 0, when EVM is not enabled.
(Returning an error is a remnant of evm_inode_post_init_security.)
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Permit changing of security.evm only when valid, unless in fixmode.
Reported-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
We will use digital signatures in addtion to hmac.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
If EVM is not supported or enabled, evm_verify_hmac() returns
INTEGRITY_UNKNOWN, which ima_appraise_measurement() ignores and sets
the appraisal status based solely on the security.ima verification.
evm_verify_hmac() also returns INTEGRITY_UNKNOWN for other failures, such
as temporary failures like -ENOMEM, resulting in possible attack vectors.
This patch changes the default return code for temporary/unexpected
failures, like -ENOMEM, from INTEGRITY_UNKNOWN to INTEGRITY_FAIL, making
evm_verify_hmac() fail safe.
As a result, failures need to be re-evaluated in order to catch both
temporary errors, such as the -ENOMEM, as well as errors that have been
resolved in fix mode.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Using shash is more efficient, because the algorithm is allocated only
once. Only the descriptor to store the hash state needs to be allocated
for every operation.
Changelog v6:
- check for crypto_shash_setkey failure
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Initialize 'security.evm' for new files.
Changelog v7:
- renamed evm_inode_post_init_security to evm_inode_init_security
- moved struct xattr definition to earlier patch
- allocate xattr name
Changelog v6:
- Use 'struct evm_ima_xattr_data'
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Imbed the evm calls evm_inode_setxattr(), evm_inode_post_setxattr(),
evm_inode_removexattr() in the security hooks. evm_inode_setxattr()
protects security.evm xattr. evm_inode_post_setxattr() and
evm_inode_removexattr() updates the hmac associated with an inode.
(Assumes an LSM module protects the setting/removing of xattr.)
Changelog:
- Don't define evm_verifyxattr(), unless CONFIG_INTEGRITY is enabled.
- xattr_name is a 'const', value is 'void *'
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
EVM protects a file's security extended attributes(xattrs) against integrity
attacks. The current patchset maintains an HMAC-sha1 value across the security
xattrs, storing the value as the extended attribute 'security.evm'. We
anticipate other methods for protecting the security extended attributes.
This patch reserves the first byte of 'security.evm' as a place holder for
the type of method.
Changelog v6:
- move evm_ima_xattr_type definition to security/integrity/integrity.h
- defined a structure for the EVM xattr called evm_ima_xattr_data
(based on Serge Hallyn's suggestion)
- removed unnecessary memset
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
EVM protects a file's security extended attributes(xattrs) against integrity
attacks. This patchset provides the framework and an initial method. The
initial method maintains an HMAC-sha1 value across the security extended
attributes, storing the HMAC value as the extended attribute 'security.evm'.
Other methods of validating the integrity of a file's metadata will be posted
separately (eg. EVM-digital-signatures).
While this patchset does authenticate the security xattrs, and
cryptographically binds them to the inode, coming extensions will bind other
directory and inode metadata for more complete protection. To help simplify
the review and upstreaming process, each extension will be posted separately
(eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the
proposed Linux integrity subsystem, refer to Dave Safford's whitepaper:
http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf.
EVM depends on the Kernel Key Retention System to provide it with a
trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the
root's keyring using keyctl. Until EVM receives notification that the key has
been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can
not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN.
Loading the key and signaling EVM should be done as early as possible. Normally
this is done in the initramfs, which has already been measured as part of the
trusted boot. For more information on creating and loading existing
trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A
sample dracut patch, which loads the trusted/encrypted key and enables EVM, is
available from http://linux-ima.sourceforge.net/#EVM.
Based on the LSMs enabled, the set of EVM protected security xattrs is defined
at compile. EVM adds the following three calls to the existing security hooks:
evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To
initialize and update the 'security.evm' extended attribute, EVM defines three
calls: evm_inode_post_init(), evm_inode_post_setattr() and
evm_inode_post_removexattr() hooks. To verify the integrity of a security
xattr, EVM exports evm_verifyxattr().
Changelog v7:
- Fixed URL in EVM ABI documentation
Changelog v6: (based on Serge Hallyn's review)
- fix URL in patch description
- remove evm_hmac_size definition
- use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size)
- moved linux include before other includes
- test for crypto_hash_setkey failure
- fail earlier for invalid key
- clear entire encrypted key, even on failure
- check xattr name length before comparing xattr names
Changelog:
- locking based on i_mutex, remove evm_mutex
- using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1
operation.
- replaced crypto hash with shash (Dmitry Kasatkin)
- support for additional methods of verifying the security xattrs
(Dmitry Kasatkin)
- iint not allocated for all regular files, but only for those appraised
- Use cap_sys_admin in lieu of cap_mac_admin
- Use __vfs_setxattr_noperm(), without permission checks, from EVM
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Tetsuo Handa