Commit Graph

32 Commits

Author SHA1 Message Date
Heiko Stuebner b3e4b95366 ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-boot
Add an ethernet0 alias for the RK3066/RK3188 mac interface so
that u-boot can find the device-node and fill in the mac address on
boards that support a wired network interface.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-19 05:54:58 +01:00
Heiko Stuebner 760bb9773f ARM: dts: rockchip: add usb phys to Cortex-A9 socs
This adds the usbphy nodes to rk3066 and rk3188, which share the usb hosts
in rk3xxx.dtsi and also enables it on boards based around these socs.

The usb-phy itself is the same as used on the rk3288 already.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-08-08 12:25:35 +02:00
Heiko Stuebner ec32bd9fca ARM: dts: rockchip: set correct dwc2 params for cortex-a9 socs
According to the manual, the fifo sizes are the same as on later socs
like the rk3288 and this also fixes an error about "insufficient fifo
memory", as it seems the values read from the ip are wrong.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-08-08 12:25:32 +02:00
Heiko Stuebner d6250a1fdd ARM: dts: rockchip: relicense rk3xxx.dtsi under GPLv2/X11
GPLv2-only devicetrees make reuse difficult for software components licensed
under a different license.

The consensus is that a GPL/X11 dual-license should allow all necessary uses,
so relicense the rk3xxx.dtsi to this combination.

CCs were aquired by git shortlog -sne so it should've hopefully catched
every contributor.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Beniamino Galvani <b.galvani@gmail.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Julien Chauveau <chauveau.julien@gmail.com>
2015-05-13 22:51:56 +02:00
Julien CHAUVEAU 4c1e3ff74d ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188
The SDMMC, SDIO and EMMC controllers use an external FIFO whose size is 256x32bit.
This patch set the corresponding fifo-depth properties for both RK3066 and RK3188.

Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-01 00:39:58 +01:00
Julien CHAUVEAU e5b0deda04 ARM: dts: rockchip: add serial aliases for rk3066 and rk3188
Add aliases for UARTs on rk3066 and rk3188 in order to fix the numbering scheme.
This will keep the debug console on ttyS2 when UART 1 is disabled, for example.

Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-02 13:26:46 +01:00
Julien CHAUVEAU b3e3a7b258 ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188
According to the RK3066 and RK3188 TRM, the two SPI controllers support DMA
handshake interface. Add the DMA properties so they can be used when needed.

Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-10-20 11:52:25 +02:00
Linus Torvalds 35a9ad8af0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...
2014-10-08 21:40:54 -04:00
Olof Johansson fa0510fb21 More peripheral support for Rockchip SoCs
- dwc2 usb controllers
 - spi controllers
 - emmc controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJUH/JuAAoJEPOmecmc0R2BhJMH/3qVBTtvmBWOcV/aZldW+hqc
 IeJXmSE3R25+A5L2m0rkteat+0karR5eOFXMiDWr4IUChBdWdQtfuY/PM9szSs7d
 zwEFSpolAjlWPWfYvhBdaLopBgqGcVPJi+bp32TGYgUXz+cYuX0CACJO9noY9FwK
 PMdo8oGbiH0SYJgaTPGiE77wHNxvgNQUP2194SIJi5dYctQ2tla4DeuVCBW68PbN
 BPSGiWPGDouVm/H4Ut4dQMPo7Kn+go4xmjo0g8BHCVRz2SFu6gZ4hMEhy5J2YV5n
 WQm4wcJKD1qFIt8k1XZnzY/e7MM5Wlk/gFuRfcRsZcTOtTsi+rh7/52JOcagNtk=
 =4Z0Z
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "second bunch of dts changes for 3.18" from Heiko Stubner:

More peripheral support for Rockchip SoCs
- dwc2 usb controllers
- spi controllers
- emmc controller

* tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
  ARM: dts: rockchip: fix rk3188 emmc pull references
  ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
  ARM: dts: rockchip: clean up rk3xxx mmc nodes
  ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
  ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
  ARM: dts: rockchip: enable usb ports on Radxa Rock
  ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
  ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
  ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
  ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
  ARM: dts: Add mshc aliases for rk3288
  ARM: dts: Add SPI nodes to rk3288
  ARM: dts: Enable USB host1(dwc) on rk3288-evb
  ARM: dts: add rk3288 dwc2 controller support
  ARM: dts: Add sdio0 and sdio1 to the rk3288

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-09-23 22:27:51 -07:00
Heiko Stuebner 71557d70b3 ARM: dts: rockchip: clean up rk3xxx mmc nodes
Commit 356649ab6d ("ARM: dts: rockchip: unuse the slot-node and deprecate
the supports-highspeed for dw-mmc") removed the slots but not the #xx-cells
properties describing the subnodes. Do this now.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13 20:28:20 +02:00
Heiko Stuebner 4ff4ae1258 ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
Add the controller node, pinctrl settings for the customizable pins
and sort the controllers like on rk3288 as emmc, sdmmc, sdio for
handling convenience.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13 20:28:17 +02:00
Heiko Stuebner 39c2bd782a ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
This adds basic spi nodes and pinctrl settings to the rk3066 and rk3188
devicetree files.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13 20:28:13 +02:00
Heiko Stuebner fd14e6f9b4 ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
Add the two dwc2 controllers providing an otg and a designated host port.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13 20:28:05 +02:00
Heiko Stuebner ce6965ebcc ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
This is a remnant from the first i2c driver iteration that seems to have
been forgotten and thus made its way into the dtsi. Remove it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-13 20:28:02 +02:00
Romain Perier 18ec91e194 ARM: dts: Add emac nodes to the rk3188 device tree
This adds support for EMAC Rockchip driver on RK3188 SoCs.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09 17:29:59 -07:00
Arnd Bergmann 8baebe3064 Enable the AMBA bus and add necessary dma-controller dts nodes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCAAGBQJUBiq/AAoJEPOmecmc0R2BE5EH/0tpqDdvMkIWFeT4Wv7lqbds
 CFzg6kP7T14tzRgEAQlO2EeZ4SvsWhBRrXo1GKy7GcsTuouRikpADF3HC3v3hPgw
 x1Gi/t0ZpqHZEymV/jUJx7Cakqhz65tUK4SrDqGIc20m2XrBHIQD1vg7yKJpzVcX
 nVtmuhAicyxGYUNYT3t3XXToWBWXhUQ0rBDymAfP3eUbzKfFMBi47C0klqE8/DZQ
 bdEjRSTTrlmznSL9AVqXAlfZ+DwCTS4qO+4nZ2LTYnZjTEqxbU2lGKwe5z+0f/sg
 /XdWhtk9YgJAYE4WDMNpQkcrYU/cXOD+EWCrvv1+SGA1YOJnUgRlkFwlhWO0uTM=
 =SrWP
 -----END PGP SIGNATURE-----

Merge tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "rockchip dma support" from Heiko Stuebner:

Enable the AMBA bus and add necessary dma-controller dts nodes

* tag 'v3.18-rockchip-dma' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: add rk3066 and rk3188 dma controllers
  ARM: dts: rockchip: add rk3288 dma controllers
  ARM: rockchip: enable the AMBA bus

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-09-04 22:01:33 +02:00
Heiko Stübner ac42f481b7 ARM: dts: rockchip: add rk3066 and rk3188 dma controllers
Add both the cpu and peripheral pl330 dma controllers present in rk3188 socs.
The first dma controller can change between secure and non-secure mode. Both
instances are added but the non-secure variant is left disabled by default,
as on the majority of boards the bootloader leaves it in secure mode.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-02 22:28:32 +02:00
Heiko Stübner f23a6179d4 ARM: dts: rockchip: add saradc nodes
Add the core device nodes for the SARADC found on both the Cortex-A9 series
(rk3066 and rk3188) as well as the newer rk3288.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-08-27 23:43:01 +02:00
Heiko Stuebner eb2b9d47dd ARM: dts: rockchip: add watchdog node
This adds the Designware compatible watchdog found on RK3xxx Cortex-A9 SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-30 12:14:44 +02:00
Beniamino Galvani 550c7f4e63 ARM: dts: rockchip: add pwm nodes
This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>

Modified to use the new clock defines and added rk3066 pins.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-27 00:24:16 +02:00
Heiko Stuebner 69667ca2c4 ARM: dts: rockchip: add both clocks to uart nodes
Use the newly ammended dw_8250 clock binding to define both the baudclk as
well as the pclk supplying the ip.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:44:15 +02:00
Heiko Stuebner 9cdffd8cb9 ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings
The core controller settings themself are identical, only the compatible and
pinctrl settings differ.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:35:29 +02:00
Heiko Stuebner ff84b90ecd ARM: dts: rockchip: oder nodes by register address
To create some sort of ordering of nodes, they are suggested to be ordered by
their register address.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:28:03 +02:00
Heiko Stuebner e40b43d6ea ARM: dts: rockchip: add handles for shared nodes that don't have one yet
Some nodes that are changed in the dtsi hierarchy do not have handles yet.
As it was suggested in the rk3288 submission to do subsequent nodes changes
through such handle-references, add the missing ones.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:19:50 +02:00
Heiko Stuebner c3030d30d9 ARM: dts: rockchip: remove soc subnodes
Comments received from the rk3288 submission indicated that a generic subnode
to group soc components should not be used.

So to keep all rockchip devicetree files similar, remove it from rk3066 and rk3188.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-07-26 23:19:06 +02:00
Heiko Stuebner 560106c1ca ARM: dts: rockchip: move oscillator input clock into main dtsi
The clock definitions get a lot shorter due to the soc clocks being handled by
rk3188-cru and only the input clock remains. These can now simply live
in the main rk3xxx.dtsi without affecting readability.

At the same time, rename the node to oscillator, adding a clock-output-names
property to match how the rk3288 handles this.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26 23:15:31 +02:00
Heiko Stuebner b13d2a7b43 ARM: dts: rockchip: add cru nodes and update device clocks to use it
This adds a node for the clock and reset unit on rk3188 and rk3066 SoCs and
also updates the device nodes retrieve their clocks from there, instead of
the previous gate clock nodes.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
2014-07-26 23:15:22 +02:00
Heiko Stuebner 56f2b894dc ARM: dts: rockchip: convert pinctrl nodes to new bindings
Introduce the grf syscon and convert the pinctrl drivers for rk3066 and rk3188
to use it, instead of mapping the grf registers themselfs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Max Schwarz <max.schwarz@online.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-10 01:41:20 +02:00
Heiko Stuebner 46b8219c51 ARM: rockchip: add power-management-unit
The pmu is needed to bring up the cores during smp operations and later
also other system parts. Therefore add a node and documentation for it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01 17:21:53 +01:00
Heiko Stuebner f6f70cf707 ARM: rockchip: add snoop-control-unit
This adds the device-node and config select to enable the
scu in all Rockchip Cortex-A9 SoCs.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ulrich Prinz <ulrich.prinz@googlemail.com>
2014-03-01 16:03:40 +01:00
Heiko Stuebner f95a2b3d98 ARM: rockchip: enable arm-global-timer
RK2928 and RK3066 contain a dw_apb timer component, while the rk3188 uses
a slightly similar but still different timer component. But all of them
support the ARM-global-timer that got added as clocksource driver recently.

So enable support for it to get a working clocksource for rk3188.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-10-14 23:03:23 +02:00
Heiko Stuebner f75efdd768 ARM: rockchip: move shared dt properties to common source file
The rk3188 SoC shares a lot of peripherals with the rk3066 SoC,
but not all. Therefore move the common parts to a shared dtsi.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2013-10-14 23:03:20 +02:00