Use IRQCHIP_MASK_ON_SUSPEND to make the core irq code to
mask the iommu interrupt on suspend and unmask it on the resume.
Since now the unmask function updates the INTX settings,
that will restore them on resume from s3/s4.
Since IRQCHIP_MASK_ON_SUSPEND is only effective for interrupts
which are not wakeup sources, remove IRQCHIP_SKIP_SET_WAKE flag
and instead implement a dummy .irq_set_wake which doesn't allow
the interrupt to become a wakeup source.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-5-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is more logically correct and will also allow us to
to use mask/unmask logic to restore INTX setttings after
the resume from s3/s4.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-4-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This will give IOMMU GA log a chance to work after resume
from s3/s4.
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-2-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The end goal of the current buffer overflow detection work[0] is to gain
full compile-time and run-time coverage of all detectable buffer overflows
seen via array indexing or memcpy(), memmove(), and memset(). The str*()
family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this series
contains the foundational elements of several related buffer overflow
detection improvements by providing new common helpers and FORTIFY_SOURCE
changes needed to gain the introspection required for compiler visibility
into array sizes. Also included are a handful of already Acked instances
using the helpers (or related clean-ups), with many more waiting at the
ready to be taken via subsystem-specific trees[2]. The new helpers are:
- struct_group() for gaining struct member range introspection.
- memset_after() and memset_startat() for clearing to the end of structures.
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in structs.
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage under
GCC, and to prepare to fix the currently broken Clang support. Finishing
this work is part of the larger series[0], but depends on all the false
positives and buffer overflow bug fixes to have landed already and those
that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a compile-time
and run-time tests are added for FORTIFY_SOURCE and the mem*()-family
functions respectively. The compile time tests have found a legitimate
(though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage that
result in no known object code differences.
After this series (and the changes that have now landed via netdev
and usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds. However, due corner cases in
GCC[3] and Clang[4], I have not included the last two patches that turn
on these options, as I don't want to introduce any known warnings to
the build. Hopefully these can be solved soon.
[0] https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE
[2] https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/
[3] https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/
[4] https://bugs.llvm.org/show_bug.cgi?id=51682
[5] https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/
[6] https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/
-----BEGIN PGP SIGNATURE-----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=9xbT
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"The end goal of the current buffer overflow detection work[0] is to
gain full compile-time and run-time coverage of all detectable buffer
overflows seen via array indexing or memcpy(), memmove(), and
memset(). The str*() family of functions already have full coverage.
While much of the work for these changes have been on-going for many
releases (i.e. 0-element and 1-element array replacements, as well as
avoiding false positives and fixing discovered overflows[1]), this
series contains the foundational elements of several related buffer
overflow detection improvements by providing new common helpers and
FORTIFY_SOURCE changes needed to gain the introspection required for
compiler visibility into array sizes. Also included are a handful of
already Acked instances using the helpers (or related clean-ups), with
many more waiting at the ready to be taken via subsystem-specific
trees[2].
The new helpers are:
- struct_group() for gaining struct member range introspection
- memset_after() and memset_startat() for clearing to the end of
structures
- DECLARE_FLEX_ARRAY() for using flex arrays in unions or alone in
structs
Also included is the beginning of the refactoring of FORTIFY_SOURCE to
support memcpy() introspection, fix missing and regressed coverage
under GCC, and to prepare to fix the currently broken Clang support.
Finishing this work is part of the larger series[0], but depends on
all the false positives and buffer overflow bug fixes to have landed
already and those that depend on this series to land.
As part of the FORTIFY_SOURCE refactoring, a set of both a
compile-time and run-time tests are added for FORTIFY_SOURCE and the
mem*()-family functions respectively. The compile time tests have
found a legitimate (though corner-case) bug[6] already.
Please note that the appearance of "panic" and "BUG" in the
FORTIFY_SOURCE refactoring are the result of relocating existing code,
and no new use of those code-paths are expected nor desired.
Finally, there are two tree-wide conversions for 0-element arrays and
flexible array unions to gain sane compiler introspection coverage
that result in no known object code differences.
After this series (and the changes that have now landed via netdev and
usb), we are very close to finally being able to build with
-Warray-bounds and -Wzero-length-bounds.
However, due corner cases in GCC[3] and Clang[4], I have not included
the last two patches that turn on these options, as I don't want to
introduce any known warnings to the build. Hopefully these can be
solved soon"
Link: https://lore.kernel.org/lkml/20210818060533.3569517-1-keescook@chromium.org/ [0]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/log/?qt=grep&q=FORTIFY_SOURCE [1]
Link: https://lore.kernel.org/lkml/202108220107.3E26FE6C9C@keescook/ [2]
Link: https://lore.kernel.org/lkml/3ab153ec-2798-da4c-f7b1-81b0ac8b0c5b@roeck-us.net/ [3]
Link: https://bugs.llvm.org/show_bug.cgi?id=51682 [4]
Link: https://lore.kernel.org/lkml/202109051257.29B29745C0@keescook/ [5]
Link: https://lore.kernel.org/lkml/20211020200039.170424-1-keescook@chromium.org/ [6]
* tag 'overflow-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
fortify: strlen: Avoid shadowing previous locals
compiler-gcc.h: Define __SANITIZE_ADDRESS__ under hwaddress sanitizer
treewide: Replace 0-element memcpy() destinations with flexible arrays
treewide: Replace open-coded flex arrays in unions
stddef: Introduce DECLARE_FLEX_ARRAY() helper
btrfs: Use memset_startat() to clear end of struct
string.h: Introduce memset_startat() for wiping trailing members and padding
xfrm: Use memset_after() to clear padding
string.h: Introduce memset_after() for wiping trailing members/padding
lib: Introduce CONFIG_MEMCPY_KUNIT_TEST
fortify: Add compile-time FORTIFY_SOURCE tests
fortify: Allow strlen() and strnlen() to pass compile-time known lengths
fortify: Prepare to improve strnlen() and strlen() warnings
fortify: Fix dropped strcpy() compile-time write overflow check
fortify: Explicitly disable Clang support
fortify: Move remaining fortify helpers into fortify-string.h
lib/string: Move helper functions out of string.c
compiler_types.h: Remove __compiletime_object_size()
cm4000_cs: Use struct_group() to zero struct cm4000_dev region
can: flexcan: Use struct_group() to zero struct flexcan_regs regions
...
Replace uses of sme_active() with the more generic cc_platform_has()
using CC_ATTR_HOST_MEM_ENCRYPT. If future support is added for other
memory encryption technologies, the use of CC_ATTR_HOST_MEM_ENCRYPT
can be updated, as required.
This also replaces two usages of sev_active() that are really geared
towards detecting if SME is active.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210928191009.32551-6-bp@alien8.de
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct ivhd_entry around members ext and hidh, so
they can be referenced together. This will allow memcpy() and sizeof()
to more easily reason about sizes, improve readability, and avoid future
warnings about writing beyond the end of ext.
"pahole" shows no size nor member offset changes to struct ivhd_entry.
"objdump -d" shows no object code changes.
Cc: Will Deacon <will@kernel.org>
Cc: iommu@lists.linux-foundation.org
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since the function has been simplified and only call iommu_init_ga_log(),
remove the function and replace with iommu_init_ga_log() instead.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210820202957.187572-4-suravee.suthikulpanit@amd.com
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, iommu_init_ga() checks and disables IOMMU VAPIC support
(i.e. AMD AVIC support in IOMMU) when GAMSup feature bit is not set.
However it forgets to clear IRQ_POSTING_CAP from the previously set
amd_iommu_irq_ops.capability.
This triggers an invalid page fault bug during guest VM warm reboot
if AVIC is enabled since the irq_remapping_cap(IRQ_POSTING_CAP) is
incorrectly set, and crash the system with the following kernel trace.
BUG: unable to handle page fault for address: 0000000000400dd8
RIP: 0010:amd_iommu_deactivate_guest_mode+0x19/0xbc
Call Trace:
svm_set_pi_irte_mode+0x8a/0xc0 [kvm_amd]
? kvm_make_all_cpus_request_except+0x50/0x70 [kvm]
kvm_request_apicv_update+0x10c/0x150 [kvm]
svm_toggle_avic_for_irq_window+0x52/0x90 [kvm_amd]
svm_enable_irq_window+0x26/0xa0 [kvm_amd]
vcpu_enter_guest+0xbbe/0x1560 [kvm]
? avic_vcpu_load+0xd5/0x120 [kvm_amd]
? kvm_arch_vcpu_load+0x76/0x240 [kvm]
? svm_get_segment_base+0xa/0x10 [kvm_amd]
kvm_arch_vcpu_ioctl_run+0x103/0x590 [kvm]
kvm_vcpu_ioctl+0x22a/0x5d0 [kvm]
__x64_sys_ioctl+0x84/0xc0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes by moving the initializing of AMD IOMMU interrupt remapping mode
(amd_iommu_guest_ir) earlier before setting up the
amd_iommu_irq_ops.capability with appropriate IRQ_POSTING_CAP flag.
[joro: Squashed the two patches and limited
check_features_on_all_iommus() to CONFIG_IRQ_REMAP
to fix a compile warning.]
Signed-off-by: Wei Huang <wei.huang2@amd.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210820202957.187572-2-suravee.suthikulpanit@amd.com
Link: https://lore.kernel.org/r/20210820202957.187572-3-suravee.suthikulpanit@amd.com
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove the new use of the variable introduced in the AMD driver branch.
The variable was removed already in the iommu core branch, causing build
errors when the brances are merged.
Cc: Nadav Amit <namit@vmware.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210802150643.3634-1-joro@8bytes.org
Do not use flush-queue on virtualized environments, where the NpCache
capability of the IOMMU is set. This is required to reduce
virtualization overheads.
This change follows a similar change to Intel's VT-d and a detailed
explanation as for the rationale is described in commit 29b3283972
("iommu/vt-d: Do not use flush-queue when caching-mode is on").
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Jiajun Cao <caojiajun@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20210723093209.714328-3-namit@vmware.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
We only ever now set strict mode enabled in iommu_set_dma_strict(), so
just remove the argument.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-7-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make IOMMU_DEFAULT_LAZY default for when AMD_IOMMU config is set, which
matches current behaviour.
For "fullflush" param, just call iommu_set_dma_strict(true) directly.
Since we get a strict vs lazy mode print already in iommu_subsys_init(),
and maintain a deprecation print when "fullflush" param is passed, drop the
prints in amd_iommu_init_dma_ops().
Finally drop global flag amd_iommu_unmap_flush, as it has no longer has any
purpose.
[jpg: Rebase for relocated file and drop amd_iommu_unmap_flush]
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1626088340-5838-6-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that the x86 drivers support iommu.strict, deprecate the custom
methods.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1626088340-5838-2-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent commit introduced this section mismatch warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x22a1f): Section mismatch in reference from the function detect_ivrs() to the variable .init.data:amd_iommu_force_enable
The reason is that detect_ivrs() is not marked __init while it should
be, because it is only called from another __init function. Mark
detect_ivrs() __init to get rid of the warning.
Fixes: b1e650db2c ("iommu/amd: Add amd_iommu=force_enable option")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210608122843.8413-1-joro@8bytes.org
Now that DMA ops are part of the core API via iommu-dma, fold the
vestigial remains of the IOMMU_DMA_OPS init state into the IOMMU API
phase, and clean up a few other leftovers. This should also close the
race window wherein bus_set_iommu() effectively makes the DMA ops state
visible before its nominal initialisation - it seems this was previously
fairly benign, but since commit a250c23f15 ("iommu: remove
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE") it can now lead to the strict flush
queue policy inadvertently being picked for default domains allocated
during that window, with a corresponding unexpected perfomance impact.
Reported-by: Jussi Maki <joamaki@gmail.com>
Tested-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Fixes: a250c23f15 ("iommu: remove DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE")
Link: https://lore.kernel.org/r/665db61e23ff8d54ac5eb391bef520b3a803fcb9.1622727974.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add this option to enable the IOMMU on platforms like AMD Stoney,
where the kernel usually disables it because it may cause problems in
some scenarios.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210603130203.29016-1-joro@8bytes.org
print_iommu_info prints the EFR register and then the decoded list of
features on a separate line:
pci 0000:00:00.2: AMD-Vi: Extended features (0x206d73ef22254ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
The second line is emitted via 'pr_cont', which causes it to have a
different ('warn') loglevel compared to the previous line ('info').
Commit 9a295ff0ff attempted to rectify this by removing the newline
from the pci_info format string, but this doesn't work, as pci_info
calls implicitly append a newline anyway.
Printing the decoded features on the same line would make it quite long.
Instead, change pci_info() to pr_info() to omit PCI bus location info,
which is also shown in the preceding message. This results in:
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x206d73ef22254ade): PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
Fixes: 9a295ff0ff ("iommu/amd: Print extended features in one line to fix divergent log levels")
Link: https://lore.kernel.org/lkml/alpine.LNX.2.20.13.2104112326460.11104@monopod.intra.ispras.ru
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20210504102220.1793-1-amonakov@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rather than have separate opaque setter functions that are easy to
overlook and lead to repetitive boilerplate in drivers, let's pass the
relevant initialisation parameters directly to iommu_device_register().
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/ab001b87c533b6f4db71eb90db6f888953986c36.1617285386.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In early AMD desktop/mobile platforms (during 2013), when the IOMMU
Performance Counter (PMC) support was first introduced in
commit 30861ddc9c ("perf/x86/amd: Add IOMMU Performance Counter
resource management"), there was a HW bug where the counters could not
be accessed. The result was reading of the counter always return zero.
At the time, the suggested workaround was to add a test logic prior
to initializing the PMC feature to check if the counters can be programmed
and read back the same value. This has been working fine until the more
recent desktop/mobile platforms start enabling power gating for the PMC,
which prevents access to the counters. This results in the PMC support
being disabled unnecesarily.
Unfortunatly, there is no documentation of since which generation
of hardware the original PMC HW bug was fixed. Although, it was fixed
soon after the first introduction of the PMC. Base on this, we assume
that the buggy platforms are less likely to be in used, and it should
be relatively safe to remove this legacy logic.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210409085848.3908-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit 6778ff5b21.
The original commit tries to address an issue, where PMC power-gating
causing the IOMMU PMC pre-init test to fail on certain desktop/mobile
platforms where the power-gating is normally enabled.
There have been several reports that the workaround still does not
guarantee to work, and can add up to 100 ms (on the worst case)
to the boot process on certain platforms such as the MSI B350M MORTAR
with AMD Ryzen 3 2200G.
Therefore, revert this commit as a prelude to removing the pre-init
test.
Link: https://lore.kernel.org/linux-iommu/alpine.LNX.3.20.13.2006030935570.3181@monopod.intra.ispras.ru/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Cc: Tj (Elloe Linux) <ml.linux@elloe.vision>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Alexander Monakov <amonakov@ispras.ru>
Cc: David Coe <david.coe@live.co.uk>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20210409085848.3908-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Remove exports for functions that are only used in the AMD IOMMU driver
itself, or the also always builtin perf events support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210402143312.372386-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Certain AMD platforms enable power gating feature for IOMMU PMC,
which prevents the IOMMU driver from updating the counter while
trying to validate the PMC functionality in the init_iommu_perf_ctr().
This results in disabling PMC support and the following error message:
"AMD-Vi: Unable to read/write to IOMMU perf counter"
To workaround this issue, disable power gating temporarily by programming
the counter source to non-zero value while validating the counter,
and restore the prior state afterward.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Tj (Elloe Linux) <ml.linux@elloe.vision>
Link: https://lore.kernel.org/r/20210208122712.5048-1-suravee.suthikulpanit@amd.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201753
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.
However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee23 ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")
Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.
Fixes: 6d39bdee23 ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
See Documentation/core-api/printk-formats.rst.
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201215213021.2090698-1-trix@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
From: Adrian Huang <ahuang12@lenovo.com>
The values of local variables are assigned after local variables
are declared, so no need to assign the initial value during the
variable declaration.
And, no need to assign NULL for the local variable 'ivrs_base'
after invoking acpi_put_table().
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201210021330.2022-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When I made the INTCAPXT support stop gratuitously pretending to be MSI,
I missed the fact that iommu_setup_msi() also sets the ->int_enabled
flag. I missed this in the iommu_setup_intcapxt() code path, which means
that a resume from suspend will try to allocate the IRQ domains again,
accidentally re-enabling interrupts as it does, resulting in much sadness.
Lift out the bit which sets iommu->int_enabled into the iommu_init_irq()
function which is also where it gets checked.
Link: https://lore.kernel.org/r/20210104132250.GE32151@zn.tnic/
Fixes: d1adcfbb52 ("iommu/amd: Fix IOMMU interrupt generation in X2APIC mode")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/50cd5f55be8ead0937ac315cd2f5b89364f6a9a5.camel@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
- IOVA allocation optimisations and removal of unused code
- Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
page-table of an IOMMU domain
- Support for changing the default domain type in sysfs
- Optimisation to the way in which identity-mapped regions are created
- Driver updates:
* Arm SMMU updates, including continued work on Shared Virtual Memory
* Tegra SMMU updates, including support for PCI devices
* Intel VT-D updates, including conversion to the IOMMU-DMA API
- Cleanup, kerneldoc and minor refactoring
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/XWy8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPejB/46QsXATkWt7hbDPIxlUvzUG8VP/FBNJ6A3
/4Z+4KBXR3zhvZJOEqTarnm6Uc22tWkYpNS3QAOuRW0EfVeD8H+og4SOA2iri5tR
x3GZUCng93APWpHdDtJP7kP/xuU47JsBblY/Ip9aJKYoXi9c9svtssAqKr008wxr
knv/xv/awQ0O7CNc3gAoz7mUagQxG/no+HMXMT3Fz9KWRzzvTi6s+7ZDm2faI0hO
GEJygsKbXxe1qbfeGqKTP/67EJVqjTGsLCF2zMogbnnD7DxadJ2hP0oNg5tvldT/
oDj9YWG6oLMfIVCwDVQXuWNfKxd7RGORMbYwKNAaRSvmkli6625h
=KFOO
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull IOMMU updates from Will Deacon:
"There's a good mixture of improvements to the core code and driver
changes across the board.
One thing worth pointing out is that this includes a quirk to work
around behaviour in the i915 driver (see 65f746e828 ("iommu: Add
quirk for Intel graphic devices in map_sg")), which otherwise
interacts badly with the conversion of the intel IOMMU driver over to
the DMA-IOMMU APU but has being fixed properly in the DRM tree.
We'll revert the quirk later this cycle once we've confirmed that
things don't fall apart without it.
Summary:
- IOVA allocation optimisations and removal of unused code
- Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
page-table of an IOMMU domain
- Support for changing the default domain type in sysfs
- Optimisation to the way in which identity-mapped regions are
created
- Driver updates:
* Arm SMMU updates, including continued work on Shared Virtual
Memory
* Tegra SMMU updates, including support for PCI devices
* Intel VT-D updates, including conversion to the IOMMU-DMA API
- Cleanup, kerneldoc and minor refactoring"
* tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (50 commits)
iommu/amd: Add sanity check for interrupt remapping table length macros
dma-iommu: remove __iommu_dma_mmap
iommu/io-pgtable: Remove tlb_flush_leaf
iommu: Stop exporting free_iova_mem()
iommu: Stop exporting alloc_iova_mem()
iommu: Delete split_and_remove_iova()
iommu/io-pgtable-arm: Remove unused 'level' parameter from iopte_type() macro
iommu: Defer the early return in arm_(v7s/lpae)_map
iommu: Improve the performance for direct_mapping
iommu: avoid taking iova_rbtree_lock twice
iommu/vt-d: Avoid GFP_ATOMIC where it is not needed
iommu/vt-d: Remove set but not used variable
iommu: return error code when it can't get group
iommu: Fix htmldocs warnings in sysfs-kernel-iommu_groups
iommu: arm-smmu-impl: Add a space before open parenthesis
iommu: arm-smmu-impl: Use table to list QCOM implementations
iommu/arm-smmu: Move non-strict mode to use io_pgtable_domain_attr
iommu/arm-smmu: Add support for pagetable config domain attribute
iommu: Document usage of "/sys/kernel/iommu_groups/<grp_id>/type" file
iommu: Take lock before reading iommu group default domain type
...
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead of
having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized IOMMU
when the hypervisor supports it. This has made been possible by the
above modifications and also simplifies the existing workaround in the
HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies.
-----BEGIN PGP SIGNATURE-----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=8Gfs
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead
of having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized
IOMMU when the hypervisor supports it. This has made been possible
by the above modifications and also simplifies the existing
workaround in the HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies"
* tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/ioapic: Cleanup the timer_works() irqflags mess
iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
iommu/amd: Fix IOMMU interrupt generation in X2APIC mode
iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled
iommu/amd: Fix union of bitfields in intcapxt support
x86/ioapic: Correct the PCI/ISA trigger type selection
x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index
x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it
x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected
iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
x86/apic: Support 15 bits of APIC ID in MSI where available
x86/ioapic: Handle Extended Destination ID field in RTE
iommu/vt-d: Simplify intel_irq_remapping_select()
x86: Kill all traces of irq_remapping_get_irq_domain()
x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain
x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain
iommu/hyper-v: Implement select() method on remapping irqdomain
iommu/vt-d: Implement select() method on remapping irqdomain
iommu/amd: Implement select() method on remapping irqdomain
x86/apic: Add select() method on vector irqdomain
...
Currently, macros related to the interrupt remapping table length are
defined separately. This has resulted in an oversight in which one of
the macros were missed when changing the length. To prevent this,
redefine the macros to add built-in sanity check.
Also, rename macros to use the name of the DTE[IntTabLen] field as
specified in the AMD IOMMU specification. There is no functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20201210162436.126321-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
AMD IOMMU requires 4k-aligned pages for the event log, the PPR log,
and the completion wait write-back regions. However, when allocating
the pages, they could be part of large mapping (e.g. 2M) page.
This causes #PF due to the SNP RMP hardware enforces the check based
on the page level for these data structures.
So, fix by calling set_memory_4k() on the allocated pages.
Fixes: c69d89aff3 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20201105145832.3065-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
The AMD IOMMU has two modes for generating its own interrupts.
The first is very much based on PCI MSI, and can be configured by Linux
precisely that way. But like legacy unmapped PCI MSI it's limited to
8 bits of APIC ID.
The second method does not use PCI MSI at all in hardawre, and instead
configures the INTCAPXT registers in the IOMMU directly with the APIC ID
and vector.
In the latter case, the IOMMU driver would still use pci_enable_msi(),
read back (through MMIO) the MSI message that Linux wrote to the PCI MSI
table, then swizzle those bits into the appropriate register.
Historically, this worked because__irq_compose_msi_msg() would silently
generate an invalid MSI message with the high bits of the APIC ID in the
high bits of the MSI address. That hack was intended only for the Intel
IOMMU, and I recently enforced that, introducing a warning in
__irq_msi_compose_msg() if it was invoked with an APIC ID above 255.
Fix the AMD IOMMU not to depend on that hack any more, by having its own
irqdomain and directly putting the bits from the irq_cfg into the right
place in its ->activate() method.
Fixes: 47bea873cf "x86/msi: Only use high bits of MSI address for DMAR unit")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/05e3a5ba317f5ff48d2f8356f19e617f8b9d23a4.camel@infradead.org
Registering the remapping irq domain unconditionally is potentially
allowing I/O-APIC and MSI interrupts to be parented in the IOMMU IR domain
even when IR is disabled. Don't do that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-1-dwmw2@infradead.org
All the bitfields in here are overlaid on top of each other since
they're a union. Change the second u64 to be in a struct so it does
the intended thing.
Fixes: b5c3786ee3 ("iommu/amd: Use msi_msg shadow structs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-2-dwmw2@infradead.org
Get rid of the macro mess and use the shadow structs for the x86 specific
MSI message format. Convert the intcapxt setup to use named bitfields as
well while touching it anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-15-dwmw2@infradead.org
Commit 387caf0b75 ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the IOMMU SNP support bit is set in the IOMMU Extended Features
register, hardware re-purposes the following registers:
1. IOMMU Exclusion Base register (MMIO offset 0020h) to
Completion Wait Write-Back (CWWB) Base register
2. IOMMU Exclusion Range Limit (MMIO offset 0028h) to
Completion Wait Write-Back (CWWB) Range Limit register
and requires the IOMMU CWWB semaphore base and range to be programmed
in the register offset 0020h and 0028h accordingly.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU SNP support requires the completion wait write-back semaphore to be
implemented using a 4K-aligned page, where the page address is to be
programmed into the newly introduced MMIO base/range registers.
This new scheme uses a per-iommu atomic variable to store the current
semaphore value, which is incremented for every completion wait command.
Since this new scheme is also compatible with non-SNP mode,
generalize the driver to use 4K page for completion-wait semaphore in
both modes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ
============ ===========
irte.RemapEn=0
...
change IRTE IRQ from device ==> IO_PAGE_FAULT !!
...
irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e25 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Paul Menzel