As now graphics and media can have different steppings this patch is
renaming all _GT_STEP macros to _GRAPHICS_STEP.
Future platforms will properly choose between _MEDIA_STEP and
_GRAPHICS_STEP for each new workaround.
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-3-jose.souza@intel.com
Graphics and media IPs can have different stepping so a new field is
needed in intel_step_info.
The next patch will take care of rename gt_step to graphics_step.
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-2-jose.souza@intel.com
With the addition of stepping info for
all platforms, lets use macros for handling them
and autogenerating code for all steps at a time.
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215238.24980-1-anusha.srivatsa@intel.com
DG2 has Xe_LPD display (version 13) and Xe_HPG (version 12.55) graphics.
There are two variants (treated as subplatforms in the code): DG2-G10
and DG2-G11 that require independent programming in some areas (e.g.,
workarounds).
Bspec: 44472, 44474, 46197, 48028, 48077
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-4-matthew.d.roper@intel.com
XeHP SDV is a Intel® dGPU without display. This is just the definition
of some basic platform macros, by large a copy of current state of
Tigerlake which does not reflect the end state of this platform.
v2:
- Switch to intel_step infrastructure for stepping matches. (Jani)
v3:
- Bring earlier in patch series and leave addition of new media engines
to the engine mask for a later patch.
Bspec: 44467, 48077
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721223043.834562-3-matthew.d.roper@intel.com
Switch DG1 to use a revid->stepping table as we're trying to do on all
platforms going forward.
This removes the last use of IS_REVID() and REVID_FOREVER, so remove
those now-unused macros as well to prevent their accidental use on
future platforms.
v2:
- Use COMMON_STEP() macro in table. (Anusha)
Bspec: 44463
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-11-matthew.d.roper@intel.com
Switch JSL/EHL to use a revid->stepping table as we're trying to do on
all platforms going forward.
v2:
- Use COMMON_STEP(). (Anusha)
Bspec: 29153
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-9-matthew.d.roper@intel.com
Switch ICL to use a revid->stepping table as we're trying to do on all
platforms going forward. While we're at it, let's include some
additional steppings that have popped up, even if we don't yet have any
workarounds tied to those steppings (we probably need to audit our
workaround list soon to see if any of the bounds have moved or if new
workarounds have appeared).
Note that the current bspec table is missing information about how to
map PCI revision ID to GT/display steppings; it only provides an SoC
stepping. The mapping to GT/display steppings (which aren't always the
same as the SoC stepping) used to be in the bspec, but was apparently
dropped during an update in Nov 2019; I've made my changes here based on
an older bspec snapshot that still had the necessary information. We've
requested that the missing information be restored.
I'm only including the production revids in the table here since we're
past the point at which we usually stop trying to support pre-production
hardware. An appropriate check is added to
intel_detect_preproduction_hw() to print an error and taint the kernel
just in case someone still tries to load the driver on old
pre-production hardware.
v2:
- Drop pre-production steppings and add error/taint at startup when
loading on pre-production hardware.
Bspec: 21141 # pre-Nov 2019 snapshot
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-8-matthew.d.roper@intel.com
Switch GLK to use a revid->stepping table as we're trying to do on all
platforms going forward. Pre-production and placeholder revisions are
omitted.
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 19131
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-7-matthew.d.roper@intel.com
Switch BXT to use a revid->stepping table as we're trying to do on all
platforms going forward. Note that the REVID macros we had before
weren't being used anywhere in the code and weren't even correct; the
table values come from the bspec (and omits all the placeholder and
preproduction revisions).
Although nothing in the code is using the data from this table at the
moment, we expect some upcoming DMC patches to start utilizing it.
Bspec: 13620
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-6-matthew.d.roper@intel.com
We're long past the point where we need to care about pre-production
hardware, and we already warn the user and taint the kernel if we detect
the driver is being loaded on pre-production hardware.
Bspec: 18329
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-5-matthew.d.roper@intel.com
Switch SKL to use a revid->stepping table as we're trying to do on all
platforms going forward. Also drop the preproduction revisions and add
the newer steppings we hadn't already handled.
Note that SKL has a case where a newer revision ID corresponds to an
older GT/disp stepping (0x9 -> STEP_J0, 0xA -> STEP_I1). Also, the lack
of a revision ID 0x8 in the table is intentional and not an oversight.
We'll re-write the KBL-specific comment to make it clear that these kind
of quirks are expected.
v2:
- Since GT and display steppings are always identical on SKL use a
macro to set both values at once in a more readable manner. (Anusha)
- Drop preproduction steppings.
Bspec: 13626
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210713193635.3390052-4-matthew.d.roper@intel.com
This will allow us to better implement workarounds.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514153711.2359617-17-matthew.d.roper@intel.com
This changes the way revids not present in the array are handled:
- For gaps in the array, the next present revid is used.
- For revids beyond the array, the new STEP_FUTURE is used instead of
the last revid in the array.
In both cases, we'll get debug logging of what's going on.
v2: Rename stepping->step
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/756fe3d75b1e91ef812fc1fd3f70337e9c571d91.1616764798.git.jani.nikula@intel.com
Add new symbolic names for revision ids, and convert KBL revids to use
them via the new stepping check macros.
This also fixes theoretical out of bounds access to kbl_revids array.
v3: upgrade dbg to warn on unknown revid (José)
v2: Rename stepping->step
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/79b6c48211c6b214165391d350d556bad748f747.1616764798.git.jani.nikula@intel.com
José Roberto de Souza