Since pm_runtime_put is done when tegra_adma_probe is successful, we
cannot do pm_runtime_put_sync again in tegra_adma_remove.
Fix this by removing the pm_runtime_put_sync in tegra_adma_remove.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211021031432.3466261-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous commit 059e969c2a ("dmaengine: tegra210-adma: Using
pm_runtime_resume_and_get to replace open coding") forgets to replace
the pm_runtime_get_sync in the tegra_adma_probe, but removes the
pm_runtime_put_noidle.
Fix this by continuing to replace pm_runtime_get_sync with
pm_runtime_resume_and_get in tegra_adma_probe.
Fixes: 059e969c2a ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211021030538.3465287-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In rcar_dmac_probe, if pm_runtime_resume_and_get fails, it forgets to
disable runtime PM. And of_dma_controller_free should only be invoked
after the success of of_dma_controller_register.
Fix this by refactoring the error handling code.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211020143546.3436205-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc6 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Add support for setting dma coherent mask, dma mask is set to 64 bit
Signed-off-by: Pandith N <pandith.n@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211001140812.24977-4-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added hardware handshake selection in channel config,
for mem2per and per2mem case.
The peripheral specific handshake interface needs to be
programmed in src_per, dst_per bits of CHx_CFG register.
Signed-off-by: Pandith N <pandith.n@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211001140812.24977-3-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added support for DMA controller with more than 8 channels.
DMAC register map changes based on number of channels.
Enabling DMAC channel:
DMAC_CHENREG has to be used when number of channels <= 8
DMAC_CHENREG2 has to be used when number of channels > 8
Configuring DMA channel:
CHx_CFG has to be used when number of channels <= 8
CHx_CFG2 has to be used when number of channels > 8
Suspending and resuming channel:
DMAC_CHENREG has to be used when number of channels <= 8 DMAC_CHSUSPREG
has to be used for suspending a channel > 8
Signed-off-by: Pandith N <pandith.n@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211001140812.24977-2-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Theorically, address pointers used by STM32 DMA must be chosen so as to
ensure that all transfers within a burst block are aligned on the address
boundary equal to the size of the transfer.
If this is always the case for peripheral addresses on STM32, it is not for
memory addresses if the user doesn't respect this alignment constraint.
To avoid a weird behavior of the DMA controller in this case (no error
triggered but data are not transferred as expected), force no burst.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
buf_addr parameter of stm32_dma_set_xfer_param function is a dma_addr_t.
We only need to check the remainder of buf_addr/max_width, so, no need to
use do_div and extra u64 addr. Use '%' instead.
Fixes: e0ebdbdcb4 ("dmaengine: stm32-dma: take address into account when computing max width")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211011094259.315023-3-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To prevent accidental repeated completion, mark pending descriptor
complete in terminate_all. It can be the case when terminate_all is called
while no end of transfer interrupt occurs.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211011094259.315023-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Total amount of SG list entries executed in a single burst is limited by
the number of available DMA descriptors.
This information is useful for device drivers utilizing this DMA engine.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210829195805.148964-1-contact@artur-rojek.eu
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently, DMA clocks are turned on by the bootloader.
This patch adds support for DMA clock handling so that
the driver manages the DMA clocks.
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210923102451.11403-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
memset() and memcpy() on an MMIO region like here results in a
lockup at startup on mpc5200 platform (since this first happens
during probing of the ATA and Ethernet drivers). Use memset_io()
and memcpy_toio() instead.
Fixes: 2f9ea1bde0 ("bestcomm: core bestcomm support for Freescale MPC5200")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Link: https://lore.kernel.org/r/20211014094012.21286-1-agust@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AT_XDMAC_CC_PERID() should be used to setup bits 24..30 of XDMAC_CC
register. Using it without parenthesis around 0x7f & (i) will lead to
setting all the time zero for bits 24..30 of XDMAC_CC as the << operator
has higher precedence over bitwise &. Thus, add paranthesis around
0x7f & (i).
Fixes: 15a03850ab ("dmaengine: at_xdmac: fix macro typo")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211007111230.2331837-3-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
at_xdmac could be used on SoCs which supports backup mode (where most
of the SoC power, including power to DMA controller, is closed at suspend
time). Thus, on resume, the settings which were previously done need to be
restored. Do the same for axi configuration.
Fixes: f40566f220 ("dmaengine: at_xdmac: add AXI priority support and recommended settings")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20211007111230.2331837-2-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The variable err is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed
and move the declaration into the local scope.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20211015123447.27560-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ADMAIF FIFO uses a ring buffer and it is divided amongst the available
channels. The default FIFO size (in multiples of 16 words) of ADMAIF TX/RX
channels is as below:
* On Tegra210,
channel 1 to 2 : size = 3
channel 3 to 10: size = 2
* On Tegra186 and later,
channel 1 to 4 : size = 3
channel 5 to 20: size = 2
As per recommendation from HW, FIFO size of ADMA channel should be same as
the corresponding ADMAIF channel it maps to. FIFO corruption is observed if
the sizes do not match. We are using the default FIFO sizes for ADMAIF and
there is no plan to support any custom values.
Thus at runtime, override the ADMA channel FIFO size value depending on the
corresponding ADMAIF channel.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1631722025-19873-4-git-send-email-spujar@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Trivial change to add description for 'adma_get_burst_config' in chip
data structure.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1631722025-19873-3-git-send-email-spujar@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'has_outstanding_reqs' member description order in structure
'tegra_adma_chip_data' does not match with the corresponding member
declaration. The same is true for member assignment in chip data
structures declared for Tegra210 and Tegra186.
This is a trivial fix to re-order the mentioned member for a better
readability.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/1631722025-19873-2-git-send-email-spujar@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
percpu_ref_tryget_live() is safe to call as long as ref is between init and
exit according to the function comment. Move percpu_ref_exit() so it is
called after the dma channel is no longer valid to ensure this holds true.
Fixes: 93a40a6d74 ("dmaengine: idxd: add percpu_ref to descriptor submission path")
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163294293832.914350.10326422026738506152.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210929222922.GA357509@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The tasklet that handles the completed dma transfers uses spin_unlock
for unlocking a spin lock that was previously locked with
spin_lock_irqsave.
This caused the following lockdep warning about an inconsistent lock
state:
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
We must use spin_lock_irqsave, because it is possible to queue DMA
transfers from an irq handler.
Replace the spin_unlock and spin_lock by spin_unlock_irqrestore and
spin_lock_irqsave.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20210826094742.1302009-8-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The descriptor lists are locked for the entire tasklet that completes
the descriptors. This is not necessary, because the lock actually only
protects the descriptor lists.
Make the spin lock more fine-grained and only protect functions that
actually operate on the descriptor lists. This decreases the time when
the lock is held.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20210826094742.1302009-7-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current implementation iterates the entire done list for each
completed dma descriptor even if there are multiple completed
descriptors.
Avoid this by first moving all completed descriptors to the done list
and afterwards iterating the done list and finishing the descriptors.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20210826094742.1302009-6-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to print a message that the ZynqMP DMA driver probed
successfully, since it carries no additional information. Drop the
message.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20210826094742.1302009-3-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The clocks are provided by the ZynqMP firmware driver and are deferred
until the firmware driver has probed. This leads to misleading error
messages during probe of the zynqmp_dma driver.
Use dev_err_probe for printing errors during probe to avoid error
messages for -EPROBE_DEFER.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Link: https://lore.kernel.org/r/20210826094742.1302009-2-m.tretter@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc
Also contains, bus_remove_return_void-5.15 to resolve dependencies
-----BEGIN PGP SIGNATURE-----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=RYbR
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices
- Support for Renesas RZ/G2L dma controller
- New driver for AMD PTDMA controller
Updates:
- Big pile of idxd updates
- Updates for Altera driver, stm32-dma, dw etc"
* tag 'dmaengine-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (83 commits)
dmaengine: sh: fix some NULL dereferences
dmaengine: sh: Fix unused initialization of pointer lmdesc
MAINTAINERS: Fix AMD PTDMA DRIVER entry
dmaengine: ptdma: remove PT_OFFSET to avoid redefnition
dmaengine: ptdma: Add debugfs entries for PTDMA
dmaengine: ptdma: register PTDMA controller as a DMA resource
dmaengine: ptdma: Initial driver for the AMD PTDMA
dmaengine: fsl-dpaa2-qdma: Fix spelling mistake "faile" -> "failed"
dmaengine: idxd: remove interrupt disable for dev_lock
dmaengine: idxd: remove interrupt disable for cmd_lock
dmaengine: idxd: fix setting up priv mode for dwq
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
dmaengine: sh: Add DMAC driver for RZ/G2L SoC
dmaengine: Extend the dma_slave_width for 128 bytes
dt-bindings: dma: Document RZ/G2L bindings
dmaengine: ioat: depends on !UML
dmaengine: idxd: set descriptor allocation size to threshold for swq
dmaengine: idxd: make submit failure path consistent on desc freeing
dmaengine: idxd: remove interrupt flag for completion list spinlock
...
These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform
support and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iD8DBQBhLz215t5GS2LDRf4RAjlHAJ473D0PymaTzv68EuPHThG+DEPifQCdGjLq
QGBB6JidIP8rtEdC+LWBB8I=
=M5+N
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"These are updates for drivers that are tied to a particular SoC,
including the correspondig device tree bindings:
- A couple of reset controller changes for unisoc, uniphier, renesas
and zte platforms
- memory controller driver fixes for omap and tegra
- Rockchip io domain driver updates
- Lots of updates for qualcomm platforms, mostly touching their
firmware and power management drivers
- Tegra FUSE and firmware driver updateѕ
- Support for virtio transports in the SCMI firmware framework
- cleanup of ixp4xx drivers, towards enabling multiplatform support
and bringing it up to date with modern platforms
- Minor updates for keystone, mediatek, omap, renesas"
* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
reset: simple: remove ZTE details in Kconfig help
soc: rockchip: io-domain: Remove unneeded semicolon
soc: rockchip: io-domain: add rk3568 support
dt-bindings: power: add rk3568-pmu-io-domain support
bus: ixp4xx: return on error in ixp4xx_exp_probe()
soc: renesas: Prefer memcpy() over strcpy()
firmware: tegra: Stop using seq_get_buf()
soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
soc/tegra: fuse: Add runtime PM support
soc/tegra: fuse: Clear fuse->clk on driver probe failure
soc/tegra: pmc: Prevent racing with cpuilde driver
soc/tegra: bpmp: Remove unused including <linux/version.h>
dt-bindings: soc: ti: pruss: Add dma-coherent property
soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
firmware: arm_scmi: Use WARN_ON() to check configured transports
firmware: arm_scmi: Fix boolconv.cocci warnings
soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
soc: mediatek: mmsys: add MT8365 support
...
The dma_free_coherent() function needs a valid device pointer or it will
crash.
Fixes: 550c591a89a1 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20210827085410.GA9183@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pointer lmdesc is being inintialized with a value that is never read,
it is later being re-assigned a new value. Fix this by initializing
it with the latter value.
Addresses-Coverity: ("Unused value")
Fixes: 550c591a89a1 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210829152811.529766-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Building on ARCH=um causes a "redefined" warning, so remove this
PT_OFFSET macro to avoid the warning.
drivers/dma/ptdma/ptdma.h:34: warning: "PT_OFFSET" redefined
34 | #define PT_OFFSET 0x0
|
In file included from ./arch/um/include/asm/thread_info.h:17,
from ./include/linux/thread_info.h:60,
from ./include/asm-generic/preempt.h:5,
from ./arch/um/include/generated/asm/preempt.h:1,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from ./include/linux/debugfs.h:15,
from drivers/dma/ptdma/ptdma-debugfs.c:12:
./arch/x86/um/shared/sysdep/ptrace_user.h:4: note: this is the location of the previous definition
4 | #define PT_OFFSET(r) ((r) * sizeof(long))
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2a99524459ce ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1630178908-54973-1-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Expose data about the configuration and operation of the
PTDMA through debugfs entries: device name, capabilities,
configuration, statistics.
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1629208559-51964-4-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for AMD PTDMA controller. It performs high-bandwidth
memory to memory and IO copy operation. Device commands are managed
via a circular queue of 'descriptors', each of which specifies source
and destination addresses for copying a single buffer of data.
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Link: https://lore.kernel.org/r/1629208559-51964-2-git-send-email-Sanju.Mehta@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The spinlock is not being used in hard interrupt context. There is no need
to disable irq when acquiring the lock. The interrupt thread handler also
is not in bottom half context, therefore we can also remove disabling of
the bh. Convert all dev_lock acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984026772.1939166.11504067782824765879.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cmd_lock spinlock is not being used in hard interrupt context. There is
no need to disable irq when acquiring the lock. Convert all cmd_lock
acquisition to plain spin_lock() calls.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162984027930.1939209.15758413737332339204.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DSA spec says WQ priv bit is 0 if the Privileged Mode Enable field of the
PCI Express PASID capability is 0 and pasid is enabled. Make sure that the
WQCFG priv field is set correctly according to usage type. Reject config if
setting up kernel WQ type and no support. Also add the correct priv setup
for a descriptor.
Fixes: 484f910e93 ("dmaengine: idxd: fix wq config registers offset programming")
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162939084657.903168.14160019185148244596.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The xilinx dma driver uses the consistent allocations, so for correct
operation also set the DMA mask for coherent APIs. It fixes the below
kernel crash with dmatest client when DMA IP is configured with 64-bit
address width and linux is booted from high (>4GB) memory.
Call trace:
[ 489.531257] dma_alloc_from_pool+0x8c/0x1c0
[ 489.535431] dma_direct_alloc+0x284/0x330
[ 489.539432] dma_alloc_attrs+0x80/0xf0
[ 489.543174] dma_pool_alloc+0x160/0x2c0
[ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180
[ 489.551524] dmatest_func+0x3cc/0x114c
[ 489.555266] kthread+0x124/0x130
[ 489.558486] ret_from_fork+0x10/0x3c
[ 489.562051] ---[ end trace 248625b2d596a90a ]---
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Harini Katakam <harini.katakam@xilinx.com>
Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The CSI2RX subsystem on J721E is serviced by UDMA via PSI-L to transfer
frames to memory. It can have up to 32 threads per instance. J721E has
two instances of the subsystem, so there are 64 threads total. Add them
to the endpoint map.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Acked-by: Peter Ujfalusi <peter.ujflausi@gmail.com>
Link: https://lore.kernel.org/r/20210819110106.31409-1-p.yadav@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DMA Controller driver for RZ/G2L SoC.
Based on the work done by Chris Brandt for RZ/A DMA driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210806095322.2326-4-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since submission is sent to limited portal, the actual wq size for shared
wq is set by the threshold rather than the wq size. When the wq type is
shared, set the allocated descriptors to the threshold.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162827151733.3459223.3829837172226042408.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The submission path for dmaengine API does not do descriptor freeing on
failure. Also, with the abort mechanism, the freeing of descriptor happens
when the abort callback is completed. Therefore free descriptor on all
error paths for submission call to make things consistent. Also remove the
double free that would happen on abort in idxd_dma_tx_submit() call.
Fixes: 6b4b87f2c3 ("dmaengine: idxd: fix submission race window")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162827146072.3459011.10255348500504659810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmEQ1REUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7w5ggAhpcDrpO7eimqPmkr/8FxI6WLGh/t
OjsAM+WVlAlHMPRC53r94Ot8q1XbenkA8Cr3hA88cJS+Hx2WunyXL4szUO+Bh/A5
o/ZpMPbitea7wQRVJkVX0AsBrvJ4hj+MQmlk31Kd2Jk7Ptpo3hoPb1J7Lg2Fou3K
g6nAELMSxa8+/1xt2AkNJppnDp6eRcOsc3yqO+7SsTGlr2JzB6SN21yvOzLWd8+Y
4v3J3a84G/w6vUlSa5mloIbGOOkyxEYitLBPrgjc5AvPjJEc0m/QlArmnuaGn1j+
LXfPFNDIlG5EIvF5HzrXMl6z8E4pGx7hWgDG/4SDWvYcbhlggtLnmra4Tg==
=bmM2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iV7U
-----END PGP SIGNATURE-----
Merge tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX eCSPI errata handling for 5.15:
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
* tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
dmaengine: imx-sdma: add uart rom script
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: fix ERR009165
dmaengine: imx-sdma: add mcu_2_ecspi script
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
dmaengine: imx-sdma: remove duplicated sdma_load_context
Revert "dmaengine: imx-sdma: refine to load context only once"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Bunch of driver fixes, notably:
- idxd driver fixes for submission race, driver remove sequence, setup
sequence for MSIXPERM, array index and updating descriptor vector
- usb-dmac, pm reference leak fix
- xilinx_dma, read-after-free fix
- uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()
- of-dma, router_xlate to return
- imx-dma, generic dma fix
-----BEGIN PGP SIGNATURE-----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=knOL
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- idxd driver fixes for submission race, driver remove sequence,
setup sequence for MSIXPERM, array index and updating descriptor
vector
- usb-dmac, pm reference leak fix
- xilinx_dma, read-after-free fix
- uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()
- of-dma, router_xlate to return
- imx-dma, generic dma fix"
* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: imx-dma: configure the generic DMA type to make it work
dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
dmaengine: idxd: fix submission race window
dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
dmaengine: idxd: fix desc->vector that isn't being updated
dmaengine: idxd: fix setup sequence for MSIXPERM table
dmaengine: idxd: fix array index when int_handles are being used
dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
The list lock is never acquired in interrupt context. Therefore there is no
need to disable interrupts. Remove interrupt flags for lock operations.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162826417450.3454650.3733188117742416238.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While IRQ test agaist the returned variable in practice is a good enough
there is still a room for theoretical mistake in case the vIRQ of the
device contains the same error code that acpi_register_gsi() may return.
Due to this, check for error code separately from matching the vIRQs.
Besides that, append documentation to tell why acpi_gsi_to_irq() can't
be used and we call acpi_register_gsi() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210802175532.54311-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the CRST parsing relies on the fact that on most of x86 devices
the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for
some. Fix this by converting GSI to Linux vIRQ before checking it.
Fixes: ee8209fd02 ("dma: acpi-dma: parse CSRT to extract additional resources")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The interrupt thread handler currently loops forever to process outstanding
completions. This causes either an "irq X: nobody cared" kernel splat or
the NMI watchdog kicks in due to running too long in the function. The irq
thread handler is expected to run again after exiting if there are
interrupts fired while the thread handler is running. So the handler code
can process all the completed I/O in a single pass and exit without losing
the follow on completed I/O.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162802977005.3084234.11836261157026497585.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The block on fault flag is not cleared when we disable or reset wq. This
causes it to remain set if the user does not clear it on the next
configuration load. Add clear of flag in dxd_wq_disable_cleanup()
routine.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162803023553.3086015.8158952172068868803.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Various DMA users call the dmaengine_slave_config() and expect it to
succeed, but that can only succeed if .device_config is implemented.
Add empty device_config function rather than patching all the places
which use dmaengine_slave_config().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210804195140.61396-1-marex@denx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since we converted internal data types to match DT, there is no need to have
an intermediate conversion layer, hence drop a few conditionals and for loops
for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210802184355.49879-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Users are a bit frightened of the harmless message that tells that
DT is missed on ACPI-based platforms. Remove it for good, it will
simplify the future conversion to fwnode and device property APIs.
Fixes: a9ddb575d6 ("dmaengine: dw_dmac: Enhance device tree support")
Depends-on: f5e84eae79 ("dmaengine: dw: platform: Split OF helpers to separate module")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199379
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210802184355.49879-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
'device_driver_attach()' dereferences its first argument (i.e. 'alt_drv')
so it must not be NULL.
Simplify the error handling logic about NULL 'alt_drv' in order to be
more robust and future-proof.
Fixes: 568b212646 ("dmaengine: idxd: fix uninit var for alt_drv")
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/77f0dc4f3966591d1f0cffb614a94085f8895a85.1627560174.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit dea7a9fbb0 ("dmaengine: imx-dma: remove dma_slave_config
direction usage") changes the method from a "configuration when called"
to an "configuration when used". Due to this, only the cyclic DMA type
gets configured correctly, while the generic DMA type is left
non-configured.
Without this additional call, the struct imxdma_channel::word_size member
is stuck at DMA_SLAVE_BUSWIDTH_UNDEFINED and imxdma_prep_slave_sg() always
returns NULL.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Fixes: dea7a9fbb0 ("dmaengine: imx-dma: remove dma_slave_config direction usage")
Link: https://lore.kernel.org/r/20210729071821.9857-1-jbe@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit dea7a9f
dmaengine: imx-dma: remove dma_slave_config direction usage
changes the method from a "configuration when called" to an "configuration
when used". Due to this, only the cyclic DMA type gets configured
correctly, while the generic DMA type is left non-configured.
Without this additional call, the struct imxdma_channel::word_size member
is stuck at DMA_SLAVE_BUSWIDTH_UNDEFINED and imxdma_prep_slave_sg() always
returns NULL.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Link: https://lore.kernel.org/r/20210729071821.9857-1-jbe@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Burst length, DMA HW capability set in dt-binding is now used in driver.
Signed-off-by: Pandith N <pandith.n@intel.com>
Tested-by: Pan Kris <kris.pan@intel.com>
Link: https://lore.kernel.org/r/20210802055454.15192-4-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Added support for multiple DMA_MEM_TO_DEV, DMA_DEV_TO_MEM transfers in
parallel. This is required for peripherals using DMA for transmit and
receive operations at the same time. APB slot number needs to be
programmed in channel hardware handshaking interface
Signed-off-by: Pandith N <pandith.n@intel.com>
Tested-by: Pan Kris <kris.pan@intel.com>
Link: https://lore.kernel.org/r/20210802055454.15192-3-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Removed free slot check algorithm in dw_axi_dma_set_hw_channel. For 8
DMA channels, use respective handshake slot in DMA_HS_SEL APB register.
For every channel, an dedicated slot is provided in hardware handshake
register AXIDMA_CTRL_DMA_HS_SEL_n. Peripheral source number is
programmed in respective channel slots.
Signed-off-by: Pandith N <pandith.n@intel.com>
Tested-by: Pan Kris <kris.pan@intel.com>
Link: https://lore.kernel.org/r/20210802055454.15192-2-pandith.n@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The usb_dmac_get_current_residue function used to
take a signed integer as a pos parameter.
The only callers of this function passes an unsigned integer to it.
Therefore to make it obviously safe, let's just make this an unsgined
integer as this is used in pointer arithmetics.
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210731091939.510816-1-jordy@pwning.systems
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Coverity static analysis of linux-next found issue.
The check (status == IDXD_COMP_DESC_ABORT) is always false since status
was previously masked with 0x7f and IDXD_COMP_DESC_ABORT is 0xff.
Fixes: 6b4b87f2c3 ("dmaengine: idxd: fix submission race window")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162698465160.3560828.18173186265683415384.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enabling device and wq returns standard errno and that does not provide
enough details to indicate what exactly failed. The hardware command status
is only 8bits. Expand the command status to 32bits and use the upper 16
bits to define software errors to provide more details on the exact
failure. Bit 31 will be used to indicate the error is software set as the
driver is using some of the spec defined hardware error as well.
Cc: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373579.1968485.5891788397526827892.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The device submission portal is on a 4k page and any of those 64bit aligned
address on the page can be used for descriptor submission. By rotating the
offset through the 4k range and prevent successive writes to the same MMIO
address, performance improvement is observed through testing.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681372446.1968485.10634280461681015569.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sbitmap wait and allocate routine checks the index that is returned
from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid
index. This fixes issue where submission path hangs when WQ size is 1.
Fixes: 0705107fcc ("dmaengine: idxd: move submission to sbitmap_queue")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
0-day detected uninitialized alt_drv variable in the bind_store() function.
The branch can be taken when device is not idxd device or wq 'struct
device'. Init alt_drv to NULL.
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162689250332.2114335.636367120454420852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set GRPCFG traffic class to value of 1 for best performance on current
generation of accelerators. Also add override option to allow experimentation.
Sysfs knobs are disabled for DSA/IAX gen1 devices.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162681373005.1968485.3761065664382799202.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When using SCMI clocks, the clocks are probed later than subsys initcall
level. This driver uses platform_driver_probe which is not compatible with
deferred probing and won't be probed again later if probe function fails
due to clocks not being available at that time.
This patch replaces the use of platform_driver_probe with
platform_driver_register which will allow probing the driver later again
when clocks will be available.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20210728094607.50589-1-clement.leger@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If the router_xlate can not find the controller in the available DMA
devices then it should return with -EPORBE_DEFER in a same way as the
of_dma_request_slave_channel() does.
The issue can be reproduced if the event router is registered before the
DMA controller itself and a driver would request for a channel before the
controller is registered.
In of_dma_request_slave_channel():
1. of_dma_find_controller() would find the dma_router
2. ofdma->of_dma_xlate() would fail and returned NULL
3. -ENODEV is returned as error code
with this patch we would return in this case the correct -EPROBE_DEFER and
the client can try to request the channel later.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code,
there is no actual functional change.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210607064640.121394-4-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the checkpatch.pl warning: "Prefer kstrto<type> to single variable sscanf".
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Link: https://lore.kernel.org/r/20210710165432.GA690401@pc
Signed-off-by: Vinod Koul <vkoul@kernel.org>
STM32 USART/UART is not managing correctly the default DMA REQ/ACK protocol
leading to possibly lock the DMA stream.
Default protocol consists in maintaining ACK signal up to the removal of
REQuest and the transfer completion.
In case of alternative REQ/ACK protocol, ACK de-assertion does not wait the
removal of the REQuest, but only the transfer completion.
This patch retrieves the need of the alternative protocol through the
device tree, and sets the protocol accordingly.
It also unwrap STM32_DMA_DIRECT_MODE_GET macro definition for consistency
with new STM32_DMA_ALT_ACK_MODE_GET macro definition.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210624093959.142265-3-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When using 'pcim_enable_device()', 'pci_alloc_irq_vectors()' is
auto-magically a managed function.
It is useless (but harmless) to record an action to explicitly call
'pci_free_irq_vectors()'.
So keep things simple, comment why and how these resources are freed, axe
some useless code and save some memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4f8932e2d0d8d092bf60272511100030e013bc72.1623875508.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 4f3ceca254 ("dmaengine: stm32-dmamux: Add PM Runtime support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210607064640.121394-3-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 48bc73ba14 ("dmaengine: stm32-dma: Add PM Runtime support")
Fixes: 05f8740a0e ("dmaengine: stm32-dma: add suspend/resume power management support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210607064640.121394-2-zhangqilong3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYPkvsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8pwCff+mL/zOaU8M1KwIHrEvNH6LgF58AoKgBAeCb
58Lenmw44ofP5itzU5x3
=J5mO
-----END PGP SIGNATURE-----
Merge tag 'bus_remove_return_void-5.15' into next
This helps to remove conflict on idxd driver
Conflicts:
drivers/dma/idxd/sysfs.c
drivers/dma/idxd/bus.c
Greg says:
Bus: Make remove callback return void tag
Tag for other trees/branches to pull from in order to have a stable
place to build off of if they want to add new busses for 5.15.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The function uniphier_xdmac_chan_stop() is only called in atomic state.
Should use readl_poll_timeout_atomic() there instead of
readl_poll_timeout().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 667b925144 ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1627364852-28432-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add terminated list for keeping descriptor so that it could be freed in
worker without any potential involving next descriptor raised up before
this descriptor freed, because vchan_get_all_descriptors get all
descriptors including the last terminated descriptor and the next
descriptor, hence, the next descriptor maybe freed unexpectly when it's
done in worker without this patch.
https://www.spinics.net/lists/dmaengine/msg23367.html
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For the compatibility of NXP internal legacy kernel before 4.19 which
is based on uart ram script and upstreaming kernel based on uart rom
script, add both uart ram/rom script in latest sdma firmware. By default
uart rom script used.
Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add
back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6).
rom script:
uart_2_mcu_addr
uartsh_2_mcu_addr /* through spba bus */
am script:
uart_2_mcu_ram_addr
uartsh_2_mcu_ram_addr /* through spba bus */
Please get latest sdma firmware from the below and put them into the path
(/lib/firmware/imx/sdma/):
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
/tree/imx/sdma
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add 'fw_loaded' and 'is_ram_script' to check if the script used by channel
is ram script and it's loaded or not, so that could prevent meaningless
following malloc dma descriptor and bd allocate in sdma_transfer_init(),
otherwise memory may be consumed out potentially without free in case
that spi fallback into pio while dma transfer failed by sdma firmware not
ready(next ERR009165 patch depends on sdma RAM scripts/firmware).
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since sdma_transfer_init() will do sdma_load_context before any
sdma transfer, no need once more in sdma_config_channel().
Fixes: ad0d92d7ba ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit ad0d92d7ba, because
in spi-imx case, burst length may be changed dynamically.
Fixes: ad0d92d7ba ("dmaengine: imx-sdma: refine to load context only once")
Cc: <stable@vger.kernel.org>
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel memory are pinned and will not cause faults. Since the driver
does not support interrupts for user descriptors, no fault errors are
expected to come through the misc interrupt. Remove dead code.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162630502789.631986.10591230961790023856.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby
a single entry in the list of bus drivers, /sys/bus/drivers/dsa,
handled all device types and internally routed them to different
different drivers. Those internal drivers were invisible to
userspace.
With the idxd driver transitioned to a proper bus device-driver model,
the legacy behavior needs to be preserved due to it being exposed to
user space via sysfs. Create a compat driver to provide the legacy
behavior for /sys/bus/dsa/drivers/dsa. This should satisfy user
tool accel-config v3.2 or ealier where this behavior is expected.
If the distro has a newer accel-config then the legacy mode does
not need to be enabled.
When the compat driver binds the device (i.e. dsa0) to the dsa driver,
it will be bound to the new idxd_drv. The wq device (i.e. wq0.0) will
be bound to either the dmaengine_drv or the user_drv. The dsa_drv
becomes a routing mechansim for the new drivers. It will not support
additional external drivers that are implemented later.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468705.744545.4399080971745974435.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for dsa_drv compat support to be built-in, move the bus
code to its own compilation unit. A follow-on patch adds the compat
implementation. Recall that the compat implementation allows for the
deprecated / omnibus dsa_drv binding scheme rather than the idiomatic
organization of a full fledged bus driver per driver type.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637468142.744545.2811632736881720857.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_user_drv driver that controls the enabling and disabling of the
wq and also register and unregister a char device to allow user space
to mmap the descriptor submission portal.
The cdev related bits are moved to the cdev driver probe/remove and out of
the drv_enabe/disable_wq() calls. These bits are exclusive to the cdev
operation and not part of the generic enable/disable of the wq device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467578.744545.10203997610072341376.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the
idxd_dmaengine_drv driver that controls the enabling and disabling of the
wq and also register and unregister the dma channel.
idxd_wq_alloc_resources() and idxd_wq_free_resources() also get moved to
the dmaengine driver. The resources (dma descriptors allocation and setup)
are only used by the dmaengine driver and should only happen when it loads.
The char dev driver (cdev) related bits are left in the __drv_enable_wq()
and __drv_disable_wq() calls to be moved when we split out the char dev
driver just like how the dmaengine driver is split out.
WQ autoload support is not expected currently. With the amount of
configuration needed for the device, the wq is always expected to
be enabled by a tool (or via sysfs) rather than auto enabled at driver
load.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637467033.744545.12330636655625405394.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original architecture of /sys/bus/dsa invented a scheme whereby a
single entry in the list of bus drivers, /sys/bus/drivers/dsa, handled
all device types and internally routed them to different drivers.
Those internal drivers were invisible to userspace. Now, as
/sys/bus/dsa wants to grow support for alternate drivers for a given
device, for example vfio-mdev instead of kernel-internal-dmaengine, a
proper bus device-driver model is needed. The first step in that process
is separating the existing omnibus/implicit "dsa" driver into proper
individual drivers registered on /sys/bus/dsa. Establish the idxd_drv
driver that control the enabling and disabling of the accelerator device.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637466439.744545.15210886092627144577.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add an array of support device types to the idxd_device_driver
definition in order to enable simple matching of device type to a
given driver. The deprecated / omnibus dsa_drv driver specifies
IDXD_DEV_NONE as its only role is to service legacy userspace (old
accel-config) directed bind requests and route them to them the proper
driver. It need not attach to a device when the bus is autoprobed. The
accel-config tooling is being updated to drop its dependency on this
deprecated bind scheme.
Reviewed-by: Dan Willliams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637465882.744545.17456174666211577867.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current implementation have put all the code that should be in a driver
probe/remove in the bus probe/remove function. Add ->probe() and ->remove()
support for the dsa_drv and move all those code out of bus probe/remove.
The change does not split out the distinction between device sub-driver and
wq sub-driver. It only cleans up the bus calls. The split out will be
addressed in follow on patches.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637463586.744545.5806250155539938643.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The IDXD_DEV_CONF_READY state flag is no longer needed. The current
implementation uses this flag to stop the device from doing
configuration until the pci driver probe has completed. With the
driver architecture going towards multiple sub-driver attached to
the dsa_bus, this is no longer feasible. The sub-drivers will be
allowed to probe and return with failure when they are not ready
to complete the probe rather than using a state flag to gate the
probing.
There is no expectation that the devices auto-attach to a driver.
Userspace configuration is expected to setup the device before
enabling.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460633.744545.8902095097471365420.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a 'struct idxd_dev' that wraps the 'struct device' for idxd conf_dev
that registers with the dsa bus. This is introduced in order to deal with
multiple different types of 'devices' that are registered on the dsa_bus
when the compat driver needs to route them to the correct driver to attach.
The bind() call now can determine the type of device and then do the
appropriate driver matching.
Reviewed-by Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637460065.744545.584492831446090984.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add helper functions for dsa-driver registration similar to other
bus-types. In particular, do not require dsa-drivers to open-code the
bus, owner, and mod_name fields. Let registration and unregistration
operate on the 'struct idxd_device_driver' instead of the raw /
embedded 'struct device_driver'.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162637458949.744545.14996726325385482050.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.
Fixes: 47c16ac27d ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Konstantin observed that when descriptors are submitted, the descriptor is
added to the pending list after the submission. This creates a race window
with the slight possibility that the descriptor can complete before it
gets added to the pending list and this window would cause the completion
handler to miss processing the descriptor.
To address the issue, the addition of the descriptor to the pending list
must be done before it gets submitted to the hardware. However, submitting
to swq with ENQCMDS instruction can cause a failure with the condition of
either wq is full or wq is not "active".
With the descriptor allocation being the gate to the wq capacity, it is not
possible to hit a retry with ENQCMDS submission to the swq. The only
possible failure can happen is when wq is no longer "active" due to hw
error and therefore we are moving towards taking down the portal. Given
this is a rare condition and there's no longer concern over I/O
performance, the driver can walk the completion lists in order to retrieve
and abort the descriptor.
The error path will set the descriptor to aborted status. It will take the
work list lock to prevent further processing of worklist. It will do a
delete_all on the pending llist to retrieve all descriptors on the pending
llist. The delete_all action does not require a lock. It will walk through
the acquired llist to find the aborted descriptor while add all remaining
descriptors to the work list since it holds the lock. If it does not find
the aborted descriptor on the llist, it will walk through the work
list. And if it still does not find the descriptor, then it means the
interrupt handler has removed the desc from the llist but is pending on
the work list lock and will process it once the error path releases the
lock.
Fixes: eb15e7154f ("dmaengine: idxd: add interrupt handle request and release support")
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162628855747.360485.10101925573082466530.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
->shutdown() call should only be responsible for quiescing the device.
Currently it is doing PCI device tear down. This causes issue when things
like MMIO mapping is removed while idxd_unregister_devices() will trigger
removal of idxd device sub-driver and still initiates MMIO writes to the
device. Another issue is with the unregistering of idxd 'struct device',
the memory context gets freed. So the teardown calls are accessing freed
memory and can cause kernel oops. Move all the teardown bits that doesn't
belong in shutdown to ->remove() call. Move unregistering of the idxd
conf_dev 'struct device' to after doing all the teardown to free all
the memory that's no longer needed.
Fixes: 47c16ac27d ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162629983901.395844.17964803190905549615.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following fallthrough warning (powerpc-randconfig):
drivers/dma/mpc512x_dma.c:816:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60ef0750.I8J+C6KAtb0xVOAa%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Now that UML has PCI support, this driver must depend also on
!UML since it pokes at X86_64 architecture internals that don't
exist on ARCH=um.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid
Signed-off-by: Vinod Koul <vkoul@kernel.org>
IOPS increased when changing MSIX vector to per WQ from roundrobin.
Allows descriptor to be completed by the submitter improves caching
locality.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Link: https://lore.kernel.org/r/162456717326.1130457.15258077196523268356.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When enqcmds() fails, exit path is missing a percpu_ref_put(). This can
cause failure on shutdown path when the driver is attempting to quiesce the
wq. Add missing percpu_ref_put() call on the error exit path.
Fixes: 93a40a6d74 ("dmaengine: idxd: add percpu_ref to descriptor submission path")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456170168.1121236.7240941044089212312.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MSIX permission table should be programmed BEFORE request_irq()
happens. This prevents any possibility of an interrupt happening before the
MSIX perm table is setup, however slight.
Fixes: 6df0e6c57d ("dmaengine: idxd: clear MSIX permission entry on shutdown")
Sign-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456741222.1138073.1298447364671237896.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The index to the irq vector should be local and has no relation to
the assigned interrupt handle. Assign the MSIX interrupt index that is
programmed for the descriptor. The interrupt handle only matters when it
comes to hardware descriptor programming.
Fixes: eb15e7154f ("dmaengine: idxd: add interrupt handle request and release support")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162456176939.1121476.3366256009925001897.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The cached command status is only set when the write back status is
is passed in. Move the variable set outside of the check so it is
always set.
Fixes: 0d5c10b4c8 ("dmaengine: idxd: add work queue drain support")
Reported-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162274329740.1822314.3443875665504707588.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add occupancy information to wq sysfs attribute. Attribute will show
wq occupancy data if "WQ Occupancy Support" field in WQCAP is 1. It
displays the number of entries currently in this WQ. This is provided
as an estimate and should not be relied on to determine whether there
is space in the WQ. The data is to provide information to user apps
for flow control.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162275745546.1857062.8765615879420582018.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous state cleanup patch only performed wq state cleanups. This
does not go far enough as when device is disabled or reset, the state
for groups and engines must also be cleaned up. Add additional state
cleanup beyond wq cleanup. Tie those cleanups directly to device
disable and reset, and wq disable and reset.
Fixes: da32b28c95 ("dmaengine: idxd: cleanup workqueue config after disabling")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/162285154108.2096632.5572805472362321307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by moving the error_pm label above the pm_runtime_put() in
the error path.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When user calls dmaengine_terminate_sync, the driver will clean up any
remaining descriptors for all the pending or active transfers that had
previously been submitted. However, this might happen whilst the tasklet is
invoking the DMA callback for the last finished transfer, so by the time it
returns and takes over the channel's spinlock, the list of completed
descriptors it was traversing is no longer valid. This leads to a
read-after-free situation.
Fix it by signalling whether a user-triggered termination has happened by
means of a boolean variable.
Signed-off-by: Adrian Larumbe <adrian.martinezlarumbe@imgtec.com>
Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The wrappers in include/linux/pci-dma-compat.h should go away.
Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Even if the code may look different, it should have exactly the same
run-time behavior.
If pci_set_dma_mask(64) fails and pci_set_dma_mask(32) succeeds, then
pci_set_consistent_dma_mask(64) will also fail.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/70c8a3bc67e41c5fefb526ecd64c5174c1e2dc76.1625720835.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Intel Elkhart Lake PSE DMA implementation is integrated with crossbar IP
in order to serve more hardware than there are DMA request lines available.
Due to this, program xBAR hardware to make flexible support of PSE peripheral.
The Device-to-Device has not been tested and it's not supported by DMA Engine,
but it's left in the code for the sake of documenting hardware features.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210712113940.42753-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following fallthrough warning:
drivers/dma/ti/k3-udma.c:4951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following fallthrough warnings (arm64-randconfig):
drivers/dma/ipu/ipu_idmac.c:621:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
rivers/dma/ipu/ipu_idmac.c:981:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60edca25.k00ut905IFBjPyt5%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM7jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloDQCfZOlLYXF+2KgXJQqevNnRiu7/B1gAn3aCX6xh
UWVUfu5LDIXi2uFERRT1
=Ze3R
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
Dave Jiang