In order to have better coverage of algorithms operating on block
sizes that are in the ballpark of a VPN packet, add 1472 to the
block_sizes array.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Adiantum encryption mode. Adiantum was designed by
Paul Crowley and is specified by our paper:
Adiantum: length-preserving encryption for entry-level processors
(https://eprint.iacr.org/2018/720.pdf)
See our paper for full details; this patch only provides an overview.
Adiantum is a tweakable, length-preserving encryption mode designed for
fast and secure disk encryption, especially on CPUs without dedicated
crypto instructions. Adiantum encrypts each sector using the XChaCha12
stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash
function, and an invocation of the AES-256 block cipher on a single
16-byte block. On CPUs without AES instructions, Adiantum is much
faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors
Adiantum encryption is about 4 times faster than AES-256-XTS encryption,
and decryption about 5 times faster.
Adiantum is a specialization of the more general HBSH construction. Our
earlier proposal, HPolyC, was also a HBSH specialization, but it used a
different εA∆U hash function, one based on Poly1305 only. Adiantum's
εA∆U hash function, which is based primarily on the "NH" hash function
like that used in UMAC (RFC4418), is about twice as fast as HPolyC's;
consequently, Adiantum is about 20% faster than HPolyC.
This speed comes with no loss of security: Adiantum is provably just as
secure as HPolyC, in fact slightly *more* secure. Like HPolyC,
Adiantum's security is reducible to that of XChaCha12 and AES-256,
subject to a security bound. XChaCha12 itself has a security reduction
to ChaCha12. Therefore, one need not "trust" Adiantum; one need only
trust ChaCha12 and AES-256. Note that the εA∆U hash function is only
used for its proven combinatorical properties so cannot be "broken".
Adiantum is also a true wide-block encryption mode, so flipping any
plaintext bit in the sector scrambles the entire ciphertext, and vice
versa. No other such mode is available in the kernel currently; doing
the same with XTS scrambles only 16 bytes. Adiantum also supports
arbitrary-length tweaks and naturally supports any length input >= 16
bytes without needing "ciphertext stealing".
For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in
order to make encryption feasible on the widest range of devices.
Although the 20-round variant is quite popular, the best known attacks
on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial
security margin; in fact, larger than AES-256's. 12-round Salsa20 is
also the eSTREAM recommendation. For the block cipher, Adiantum uses
AES-256, despite it having a lower security margin than XChaCha12 and
needing table lookups, due to AES's extensive adoption and analysis
making it the obvious first choice. Nevertheless, for flexibility this
patch also permits the "adiantum" template to be instantiated with
XChaCha20 and/or with an alternate block cipher.
We need Adiantum support in the kernel for use in dm-crypt and fscrypt,
where currently the only other suitable options are block cipher modes
such as AES-XTS. A big problem with this is that many low-end mobile
devices (e.g. Android Go phones sold primarily in developing countries,
as well as some smartwatches) still have CPUs that lack AES
instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too
slow to be viable on these devices. We did find that some "lightweight"
block ciphers are fast enough, but these suffer from problems such as
not having much cryptanalysis or being too controversial.
The ChaCha stream cipher has excellent performance but is insecure to
use directly for disk encryption, since each sector's IV is reused each
time it is overwritten. Even restricting the threat model to offline
attacks only isn't enough, since modern flash storage devices don't
guarantee that "overwrites" are really overwrites, due to wear-leveling.
Adiantum avoids this problem by constructing a
"tweakable super-pseudorandom permutation"; this is the strongest
possible security model for length-preserving encryption.
Of course, storing random nonces along with the ciphertext would be the
ideal solution. But doing that with existing hardware and filesystems
runs into major practical problems; in most cases it would require data
journaling (like dm-integrity) which severely degrades performance.
Thus, for now length-preserving encryption is still needed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr and tcrypt tests and vectors for Streebog hash function
from RFC 6986 and GOST R 34.11-2012, for HMAC-Streebog vectors are
from RFC 7836 and R 50.1.113-2016.
Cc: linux-integrity@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We already have OFB test vectors and tcrypt OFB speed tests.
Add OFB functional tests to tcrypt as well.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add additional test vectors from "The SM4 Blockcipher Algorithm And Its
Modes Of Operations" draft-ribose-cfrg-sm4-10 and register cipher speed
tests for sm4.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid RCU stalls in the case of non-preemptible kernel and lengthy
speed tests by rescheduling when advancing from one block size
to another.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the original version of the VMAC template that had the nonce
hardcoded to 0 and produced a digest with the wrong endianness. I'm
unsure whether this had users or not (there are no explicit in-kernel
references to it), but given that the hardcoded nonce made it wildly
insecure unless a unique key was used for each message, let's try
removing it and see if anyone complains.
Leave the new "vmac64" template that requires the nonce to be explicitly
specified as the first 16 bytes of data and uses the correct endianness
for the digest.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Blackfin CRC driver was removed by commit 9678a8dc53 ("crypto:
bfin_crc - remove blackfin CRC driver"), but it was forgotten to remove
the corresponding "hmac(crc32)" test vectors. I see no point in keeping
them since nothing else appears to implement or use "hmac(crc32)", which
isn't an algorithm that makes sense anyway because HMAC is meant to be
used with a cryptographically secure hash function, which CRC's are not.
Thus, remove the unneeded test vectors.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the quest to remove all stack VLA usage from the kernel[1], this
allocates the return code buffers before starting jiffie timers, rather
than using stack space for the array. Additionally cleans up some exit
paths and make sure that the num_mb module_param() is used only once
per execution to avoid possible races in the value changing.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There seems to be a cut-n-paste bug with the name of the buffer being
free'd, xoutbuf should be used instead of axbuf.
Detected by CoverityScan, CID#1463420 ("Copy-paste error")
Fixes: 427988d981 ("crypto: tcrypt - add multibuf aead speed test")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistakes in pr_err error message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The performance of some aead tfm providers is affected by
the amount of parallelism possible with the processing.
Introduce an async aead concurrent multiple buffer
processing speed test to be able to test performance of such
tfm providers.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The performance of some skcipher tfm providers is affected by
the amount of parallelism possible with the processing.
Introduce an async skcipher concurrent multiple buffer
processing speed test to be able to test performance of such
tfm providers.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The multi buffer concurrent requests ahash speed test only
supported the cycles mode. Add support for the so called
jiffies mode that test performance of bytes/sec.
We only add support for digest mode at the moment.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For multiple buffers speed tests, the number of buffers, or
requests, used actually sets the level of parallelism a tfm
provider may utilize to hide latency. The existing number
(of 8) is good for some software based providers but not
enough for many HW providers with deep FIFOs.
Add a module parameter that allows setting the number of
multiple buffers/requests used, leaving the default at 8.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEAD speed test pretended to support decryption, however that support
was broken as decryption requires a valid auth field which the test did
not provide.
Fix this by running the encryption path once with inout/output sgls
switched to calculate the auth field prior to performing decryption
speed tests.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The multi buffer ahash speed test was allocating multiple
buffers for use with the multiple outstanding requests
it was starting but never actually using them (except
to free them), instead using a different single statically
allocated buffer for all requests.
Fix this by actually using the allocated buffers for the test.
It is noted that it may seem tempting to instead remove the
allocation and free of the multiple buffers and leave things as
they are since this is a hash test where the input is read
only. However, after consideration I believe that multiple
buffers better reflect real life scenario with regard
to data cache and TLB behaviours etc.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In case buffer length is a multiple of PAGE_SIZE,
the S/G table is incorrectly generated.
Fix this by handling buflen = k * PAGE_SIZE separately.
Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt starts several async crypto ops and waits for their completions.
Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the way the length of the buffers used for
encryption / decryption are computed.
For e.g. in case of encryption, input buffer does not contain
an authentication tag.
Signed-off-by: Robert Baronescu <robert.baronescu@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr and tcrypt tests and vectors for SM3 secure hash.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove xts(aes) speed tests with 2 x 192-bit keys, since implementations
adhering strictly to IEEE 1619-2007 standard cannot cope with key sizes
other than 2 x 128, 2 x 256 bits - i.e. AES-XTS-{128,256}:
[...]
tcrypt: test 5 (384 bit key, 16 byte blocks):
caam_jr 8020000.jr: key size mismatch
tcrypt: setkey() failed flags=200000
[...]
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tcrypt AEAD cycles speed tests disables irqs during the test, which is
broken at the very least since commit
'1425d2d17f7309c6 ("crypto: tcrypt - Fix AEAD speed tests")'
adds a wait for completion as part of the test and probably since
switching to the new AEAD API.
While the result of taking a cycle count diff may not mean much on SMP
systems if the task migrates, it's good enough for tcrypt being the quick
& dirty dev tool it is. It's also what all the other (i.e. hash) cycle
speed tests do.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Ofir Drang <ofir.drang@arm.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
tcrypt is very tight-lipped when it succeeds, but a bit more feedback
would be useful when developing or debugging crypto drivers, especially
since even a successful run ends with the module failing to insert. Add
a couple of debug prints, which can be enabled with dynamic debug:
Before:
# insmod tcrypt.ko mode=10
insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable
After:
# insmod tcrypt.ko mode=10 dyndbg
tcrypt: testing ecb(aes)
tcrypt: testing cbc(aes)
tcrypt: testing lrw(aes)
tcrypt: testing xts(aes)
tcrypt: testing ctr(aes)
tcrypt: testing rfc3686(ctr(aes))
tcrypt: all tests passed
insmod: can't insert 'tcrypt.ko': Resource temporarily unavailable
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds HMAC-SHA3 test modes in tcrypt module
and related test vectors.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The multibuffer hash speed test is incorrectly bailing because
of an EINPROGRESS return value. This patch fixes it by setting
ret to zero if it is equal to -EINPROGRESS.
Reported-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts tcrypt to use the new skcipher interface as
opposed to ablkcipher/blkcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch resolves a number of issues with the mb speed test
function:
* The tfm is never freed.
* Memory is allocated even when we're not using mb.
* When an error occurs we don't wait for completion for other requests.
* When an error occurs during allocation we may leak memory.
* The test function ignores plen but still runs for plen != blen.
* The backlog flag is incorrectly used (may crash).
This patch tries to resolve all these issues as well as making
the code consistent with the existing hash speed testing function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The recently added test_mb_ahash_speed() has clearly serious coding
style issues. Try to fix some of them:
1. Don't mix pr_err() and printk();
2. Don't wrap strings;
3. Properly align goto statement in if() block;
4. Align wrapped arguments on new line;
5. Don't wrap functions on first argument;
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new mode to calculate the speed of the sha512_mb algorithm
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing test suite to calculate the speed of the SHA algorithms
assumes serial (single buffer)) computation of data. With the SHA
multibuffer algorithms, we work on 8 lanes of data in parallel. Hence,
the need to introduce a new test suite to calculate the speed for these
algorithms.
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added support for SHA-3 algorithm test's
in tcrypt module and related test vectors.
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the last user of the obsolete crypto_hash
interface, tcrypt, by simply switching it over to ahash. In
fact it already has all the code there so it's just a matter
of calling the ahash speed test code with the right mask.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The key sizes used by AES in GCM mode should be 128, 192 or 256 bits (16,
24 or 32 bytes).
There is no additional 4byte nonce as for RFC 4106.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The output buffer in test_ahash_speed will point to an address located
within the tcrypt module image.
This causes problems when trying to DMA map the buffer.
For e.g. on ARM-based LS1021A, a page fault occurs within the
DMA API when trying to access the struct page returned by
virt_to_page(output):
insmod tcrypt.ko mode=403
testing speed of async sha1 (sha1-caam)
test 0 ( 16 byte blocks, 16 bytes per update, 1 updates):
Unable to handle kernel paging request at virtual address f07e9080
pgd = e58d0e00
[f07e9080] *pgd=80000080007003, *pmd=00000000
Internal error: Oops: 206 [#1] SMP THUMB2
Modules linked in: tcrypt(+)
CPU: 1 PID: 1119 Comm: insmod Not tainted 4.2.0-rc1-256134-gbf433416e675 #1
Hardware name: Freescale LS1021A
task: ea063900 ti: e5a34000 task.ti: e5a34000
PC is at dma_cache_maint_page+0x38/0xd0
LR is at __dma_page_cpu_to_dev+0x15/0x64
pc : [<800155a0>] lr : [<8001564d>] psr: 000f0033
sp : e5a35ca0 ip : 8063df00 fp : f07e9080
r10: 00000cd0 r9 : 8063df00 r8 : 805a2f04
r7 : 0017f804 r6 : 00000002 r5 : ee7f9000 r4 : 00000014
r3 : 80612d40 r2 : 01ff0080 r1 : 00000380 r0 : ee7f9000
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user
Control: 70c5387d Table: e58d0e00 DAC: 9b7ede70
Process insmod (pid: 1119, stack limit = 0xe5a34210)
Stack: (0xe5a35ca0 to 0xe5a36000)
[...]
[<800155a0>] (dma_cache_maint_page) from [<8001564d>] (__dma_page_cpu_to_dev+0x15/0x64)
[<8001564d>] (__dma_page_cpu_to_dev) from [<800156eb>] (arm_dma_map_page+0x1f/0x44)
[<800156eb>] (arm_dma_map_page) from [<802935e3>] (ahash_digest+0x35f/0x510)
[<802935e3>] (ahash_digest) from [<7f800d03>] (test_ahash_speed.constprop.6+0x24a/0x4e4 [tcrypt])
[<7f800d03>] (test_ahash_speed.constprop.6 [tcrypt]) from [<7f802fd5>] (do_test+0x1898/0x2058 [tcrypt])
[<7f802fd5>] (do_test [tcrypt]) from [<7f80802f>] (tcrypt_mod_init+0x2e/0x63 [tcrypt])
[<7f80802f>] (tcrypt_mod_init [tcrypt]) from [<80009517>] (do_one_initcall+0xb3/0x134)
[<80009517>] (do_one_initcall) from [<80351ec7>] (do_init_module+0x3b/0x13c)
[<80351ec7>] (do_init_module) from [<8005cc3f>] (load_module+0x97b/0x9dc)
[<8005cc3f>] (load_module) from [<8005cd8d>] (SyS_finit_module+0x35/0x3e)
[<8005cd8d>] (SyS_finit_module) from [<8000d101>] (ret_fast_syscall+0x1/0x4c)
Code: 1aba 0152 eb00 0b02 (5882) 0f92
addr2line -f -i -e vmlinux 800155a0
page_zonenum
include/linux/mm.h:728
page_zone
include/linux/mm.h:881
dma_cache_maint_page
arch/arm/mm/dma-mapping.c:822
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds individual ChaCha20 and Poly1305 and a combined rfc7539esp AEAD speed
test using mode numbers 214, 321 and 213. For Poly1305 we add a specific
speed template, as it expects the key prepended to the input data.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch allows the AEAD speed tests to cope with the new seqiv
calling convention as well as the old one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEAD speed tests doesn't do a wait_for_completition,
if the return value is EINPROGRESS or EBUSY.
Fixing it here.
Also add a test case for gcm(aes).
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel