Rajendra reported a kernel panic when a link was taken down:
[ 6870.263084] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[ 6870.271856] IP: [<ffffffff8efc5764>] __ipv6_ifa_notify+0x154/0x290
<snip>
[ 6870.570501] Call Trace:
[ 6870.573238] [<ffffffff8efc58c6>] ? ipv6_ifa_notify+0x26/0x40
[ 6870.579665] [<ffffffff8efc98ec>] ? addrconf_dad_completed+0x4c/0x2c0
[ 6870.586869] [<ffffffff8efe70c6>] ? ipv6_dev_mc_inc+0x196/0x260
[ 6870.593491] [<ffffffff8efc9c6a>] ? addrconf_dad_work+0x10a/0x430
[ 6870.600305] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.606732] [<ffffffff8ea93a7a>] ? process_one_work+0x18a/0x430
[ 6870.613449] [<ffffffff8ea93d6d>] ? worker_thread+0x4d/0x490
[ 6870.619778] [<ffffffff8ea93d20>] ? process_one_work+0x430/0x430
[ 6870.626495] [<ffffffff8ea99dd9>] ? kthread+0xd9/0xf0
[ 6870.632145] [<ffffffff8f01ade4>] ? __switch_to_asm+0x34/0x70
[ 6870.638573] [<ffffffff8ea99d00>] ? kthread_park+0x60/0x60
[ 6870.644707] [<ffffffff8f01ae77>] ? ret_from_fork+0x57/0x70
[ 6870.650936] Code: 31 c0 31 d2 41 b9 20 00 08 02 b9 09 00 00 0
addrconf_dad_work is kicked to be scheduled when a device is brought
up. There is a race between addrcond_dad_work getting scheduled and
taking the rtnl lock and a process taking the link down (under rtnl).
The latter removes the host route from the inet6_addr as part of
addrconf_ifdown which is run for NETDEV_DOWN. The former attempts
to use the host route in ipv6_ifa_notify. If the down event removes
the host route due to the race to the rtnl, then the BUG listed above
occurs.
This scenario does not occur when the ipv6 address is not kept
(net.ipv6.conf.all.keep_addr_on_down = 0) as addrconf_ifdown sets the
state of the ifp to DEAD. Handle when the addresses are kept by checking
IF_READY which is reset by addrconf_ifdown.
The 'dead' flag for an inet6_addr is set only under rtnl, in
addrconf_ifdown and it means the device is getting removed (or IPv6 is
disabled). The interesting cases for changing the idev flag are
addrconf_notify (NETDEV_UP and NETDEV_CHANGE) and addrconf_ifdown
(reset the flag). The former does not have the idev lock - only rtnl;
the latter has both. Based on that the existing dead + IF_READY check
can be moved to right after the rtnl_lock in addrconf_dad_work.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited commit exposed an old retransmits_timed_out() bug
which assumed it could call tcp_model_timeout() with
TCP_RTO_MIN as rto_base for all states.
But flows in SYN_SENT or SYN_RECV state uses a different
RTO base (1 sec instead of 200 ms, unless BPF choses
another value)
This caused a reduction of SYN retransmits from 6 to 4 with
the default /proc/sys/net/ipv4/tcp_syn_retries value.
Fixes: a41e8a88b0 ("tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lockdep is unhappy if two locks from the same class are held.
Fix the below warning for hyperv and virtio sockets (vmci socket code
doesn't have the issue) by using lock_sock_nested() when __vsock_release()
is called recursively:
============================================
WARNING: possible recursive locking detected
5.3.0+ #1 Not tainted
--------------------------------------------
server/1795 is trying to acquire lock:
ffff8880c5158990 (sk_lock-AF_VSOCK){+.+.}, at: hvs_release+0x10/0x120 [hv_sock]
but task is already holding lock:
ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_VSOCK);
lock(sk_lock-AF_VSOCK);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by server/1795:
#0: ffff8880c5d05ff8 (&sb->s_type->i_mutex_key#10){+.+.}, at: __sock_release+0x2d/0xa0
#1: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock]
stack backtrace:
CPU: 5 PID: 1795 Comm: server Not tainted 5.3.0+ #1
Call Trace:
dump_stack+0x67/0x90
__lock_acquire.cold.67+0xd2/0x20b
lock_acquire+0xb5/0x1c0
lock_sock_nested+0x6d/0x90
hvs_release+0x10/0x120 [hv_sock]
__vsock_release+0x24/0xf0 [vsock]
__vsock_release+0xa0/0xf0 [vsock]
vsock_release+0x12/0x30 [vsock]
__sock_release+0x37/0xa0
sock_close+0x14/0x20
__fput+0xc1/0x250
task_work_run+0x98/0xc0
do_exit+0x344/0xc60
do_group_exit+0x47/0xb0
get_signal+0x15c/0xc50
do_signal+0x30/0x720
exit_to_usermode_loop+0x50/0xa0
do_syscall_64+0x24e/0x270
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f4184e85f31
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix NULL-pointer dereference on tty open due to a failure to handle a
missing interrupt-in endpoint when probing modem ports:
BUG: kernel NULL pointer dereference, address: 0000000000000006
...
RIP: 0010:tiocmget_submit_urb+0x1c/0xe0 [hso]
...
Call Trace:
hso_start_serial_device+0xdc/0x140 [hso]
hso_serial_open+0x118/0x1b0 [hso]
tty_open+0xf1/0x490
Fixes: 542f548236 ("tty: Modem functions for the HSO driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an error with how the FDT blob is reserved in memblock.
An incorrect physical address calculation exposed the FDT header to
unintended corruption, which typically manifested with of_fdt_raw_init()
faulting during late boot after fdt_totalsize() returned a wrong value.
Systems with smaller physical memory sizes more frequently trigger this
issue, as the kernel is more likely to allocate from the DMA32 zone
where bbl places the DTB after the kernel image.
Commit 671f9a3e2e ("RISC-V: Setup initial page tables in two stages")
changed the mapping of the DTB to reside in the fixmap area.
Consequently, early_init_fdt_reserve_self() cannot be used anymore in
setup_bootmem() since it relies on __pa() to derive a physical address,
which does not work with dtb_early_va that is no longer a valid kernel
logical address.
The reserved[0x1] region shows the effect of the pointer underflow
resulting from the __pa(initial_boot_params) offset subtraction:
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[ 0.000000] memory.cnt = 0x1
[ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[ 0.000000] reserved.cnt = 0x2
[ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[ 0.000000] reserved[0x1] [0xfffffff080100000-0xfffffff080100527], 0x0000000000000528 bytes flags: 0x0
With the fix applied:
[ 0.000000] MEMBLOCK configuration:
[ 0.000000] memory size = 0x000000001fe00000 reserved size = 0x0000000000a2e514
[ 0.000000] memory.cnt = 0x1
[ 0.000000] memory[0x0] [0x0000000080200000-0x000000009fffffff], 0x000000001fe00000 bytes flags: 0x0
[ 0.000000] reserved.cnt = 0x2
[ 0.000000] reserved[0x0] [0x0000000080200000-0x0000000080c2dfeb], 0x0000000000a2dfec bytes flags: 0x0
[ 0.000000] reserved[0x1] [0x0000000080e00000-0x0000000080e00527], 0x0000000000000528 bytes flags: 0x0
Fixes: 671f9a3e2e ("RISC-V: Setup initial page tables in two stages")
Signed-off-by: Albert Ou <aou@eecs.berkeley.edu>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This is almost entirely a comment. The bug is unlikely to manifest on
existing hardware because there is a timeout on load reservations, but
manifests on QEMU because there is no timeout.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Commit ac7c3e4ff4 ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
Leading to section mismatch in this case.
Since we're using const variables to pass assembly flags, 'inline's
can't be dropped. So we simply mark them as __always_inline.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: linux-mips@vger.kernel.org
[paul.burton@mips.com:
- Annotate these functions with __init, even if it only serves to
inform human readers when the code can be used.
- Drop the __always_inline from check_daddi() & check_daddiu() which
don't use arguments as immediates in inline asm.
- Rewrap the commit message.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Let's move the clearing to balloon_retrieve(). In
bp_state increase_reservation(), we now clear the flag a little earlier
than before, however, this should not matter for XEN.
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Let's move the __SetPageOffline() call which all callers perform into
balloon_append().
In bp_state decrease_reservation(), pages are now marked PG_offline a
little later than before, however, this should not matter for XEN.
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
We are missing a __SetPageOffline(), which is why we can get
!PageOffline() pages onto the balloon list, where
alloc_xenballooned_pages() will complain:
page:ffffea0003e7ffc0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xffffe00001000(reserved)
raw: 000ffffe00001000 dead000000000100 dead000000000200 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageOffline(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:744!
invalid opcode: 0000 [#1] SMP NOPTI
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: 77c4adf6a6 ("xen/balloon: mark inflated pages PG_offline")
Cc: stable@vger.kernel.org # v5.1+
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
HYPERVISOR_platform_op() is an inline function and should not
be exported. Since commit 15bfc2348d ("modpost: check for
static EXPORT_SYMBOL* functions"), this causes a warning:
WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL
Instead, export the underlying function called by the static inline:
HYPERVISOR_platform_op_raw.
Fixes: 15bfc2348d ("modpost: check for static EXPORT_SYMBOL* functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Commit a745f7af3c ("selftests/harness: Add 30 second timeout per
test") solves the problem of kselftest_harness.h-using binary tests
possibly hanging forever. However, scripts and other binaries can still
hang forever. This adds a global timeout to each test script run.
To make this configurable (e.g. as needed in the "rtc" test case),
include a new per-test-directory "settings" file (similar to "config")
that can contain kselftest-specific settings. The first recognized field
is "timeout".
Additionally, this splits the reporting for timeouts into a specific
"TIMEOUT" not-ok (and adds exit code reporting in the remaining case).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A TARGET which failed to be built/installed should not be included in the
runlist generated inside the run_kselftest.sh script.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The following commit:
227a4aadc7 ("sched/membarrier: Fix p->mm->membarrier_state racy load")
got fat fingered by me when merging it with other patches. It meant to move
the RCU section out of the for loop but ended up doing it partially, leaving
a superfluous rcu_read_lock() inside, causing havok.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Fixes: 227a4aadc7 ("sched/membarrier: Fix p->mm->membarrier_state racy load")
Link: https://lkml.kernel.org/r/20191001085033.GP4519@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Let the user specify an optional TARGETS skiplist through the new optional
SKIP_TARGETS Makefile variable.
It is easier to skip at will using a reduced and well defined list of
possibly problematic targets with SKIP_TARGETS than to provide a partially
stripped down list of good targets using the usual TARGETS variable.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This fixes up the default ux500 CPU thermal zone:
- Set polling delay to 0 and explain why
- Set passive polling delay to 250
- Remove restrictions from the CPU cooling device,
we should use all cpufreq steps to cool down if
needed.
Link: https://lore.kernel.org/r/20191001074628.8122-1-linus.walleij@linaro.org
Fixes: b786a05f6c ("ARM: dts: ux500: Update thermal zone")
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch is syncing driver with actual devicetree documentation:
Documentation/devicetree/bindings/net/qca,ar71xx.txt
|Optional subnodes:
|- mdio : specifies the mdio bus, used as a container for phy nodes
| according to phy.txt in the same directory
The driver was working with fixed phy without any noticeable issues. This bug
was uncovered by introducing dsa ar9331-switch driver.
Since no one reported this bug until now, I assume no body is using it
and this patch should not brake existing system.
Fixes: d51b6ce441 ("net: ethernet: add ag71xx driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu says:
====================
net: stmmac: Fixes for -net
Misc fixes for -net tree. More info in commit logs.
v2 is just a rebase of v1 against -net and we added a new patch (09/09) to
fix RSS feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b6b6cc9acd, changed the call to dwxgmac2_rss_write_reg()
passing it the variable cfg->key[i].
As key is an u8 but we write 32 bits at a time we need to cast it into
an u32 so that the correct key values are written. Notice that the for
loop already takes this into account so we don't try to write past the
keys size.
Fixes: b6b6cc9acd ("net: stmmac: selftest: avoid large stack usage")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sizeof(cfg->key) is != ARRAY_SIZE(cfg->key). Fix it. This warning is
triggered when running with cc flag -Wsizeof-array-div.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: 76067459c6 ("net: stmmac: Implement RSS and enable it in XGMAC core")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't use it anyway as XGMAC only supports polling for timestamp (in
current SW implementation). This greatly reduces the system load by
reducing the number of interrupts.
Fixes: 2142754f8b ("net: stmmac: Add MAC related callbacks for XGMAC2")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If WoL is enabled we can't really stop the PHY, otherwise we will not
receive the WoL packet. Fix this by telling phylink that only the MAC is
down and only stop the PHY if WoL is not enabled.
Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The case for PTPV2_EVENT requires event packets to be captured so add
this setting to the list of enabled captures.
Fixes: 891434b18e ("stmmac: add IEEE PTPv1 and PTPv2 support.")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to always update the MAC Hash Filter so that previous entries
are invalidated.
Found out while running stmmac selftests.
Fixes: b8ef7020d6 ("net: stmmac: add support for hash table size 128/256 in dwmac4")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although some XGMAC setups support frames larger than DMA size, some of
them may not. As we can't know before-hand which ones support let's use
the maximum DMA buffer size in the Jumbo Tests.
User can always reconfigure the MTU to achieve larger frames.
Fixes: 427849e8c3 ("net: stmmac: selftests: Add Jumbo Frame tests")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit b8ef7020d6 ("net: stmmac: add support for hash table size
128/256 in dwmac4"), we can detect the Hash Table dinamically.
Let's implement this feature in XGMAC cores and fix possible setups that
don't support the maximum size for Hash Table.
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some setups may not have all Unicast addresses filters available. Let's
check this before trying to setup filters.
Fixes: 0efedbf11f ("net: stmmac: xgmac: Fix XGMAC selftests")
Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If any of the param or info_get op returns error, dumpit cb is
skipping to dump remaining params or info_get ops for all the
drivers.
Fix to not return if any of the param/info_get op returns error
as not supported and continue to dump remaining information.
v2: Modify the patch to return error, except for params/info_get
op that return -EOPNOTSUPP as suggested by Andrew Lunn. Also, modify
commit message to reflect the same.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
irq_domain_add_linear() also calls of_node_get() to increase refcount,
so irq_domain will not be affected when it is released.
Fixes: d8652956cf ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_node_put needs to be called when the device node which is got
from of_get_child_by_name finished using.
In both cases of success and failure, we need to release 'ports',
so clean up the code using goto.
fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in the "net: sched: taprio: Avoid division by zero on
invalid link speed" commit, it is legal for the ethtool API to return
zero as a link speed. So guard against it to ensure we don't perform a
division by zero in kernel.
Fixes: e0a7683d30 ("net/sched: cbs: fix port_rate miscalculation")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check in taprio_set_picos_per_byte is currently not robust enough
and will trigger this division by zero, due to e.g. PHYLINK not setting
kset->base.speed when there is no PHY connected:
[ 27.109992] Division by zero in kernel.
[ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212
[ 27.121974] Hardware name: Freescale LS1021A
[ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14)
[ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4)
[ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18)
[ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0)
[ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68)
[ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4)
[ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec)
[ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4)
[ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8)
[ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc)
[ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114)
[ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c)
[ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340)
[ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24)
[ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228)
[ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c)
[ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0)
[ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000
[ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c
[ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64
Russell King points out that the ethtool API says zero is a valid return
value of __ethtool_get_link_ksettings:
* If it is enabled then they are read-only; if the link
* is up they represent the negotiated link mode; if the link is down,
* the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and
* @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode.
So, it seems that taprio is not following the API... I'd suggest either
fixing taprio, or getting agreement to change the ethtool API.
The chosen path was to fix taprio.
Fixes: 7b9eba7ba0 ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 174e23810c
("sk_buff: drop all skb extensions on free and skb scrubbing") made napi
recycle always drop skb extensions. The additional skb_ext_del() that is
performed via nf_reset on napi skb recycle is not needed anymore.
Most nf_reset() calls in the stack are there so queued skb won't block
'rmmod nf_conntrack' indefinitely.
This removes the skb_ext_del from nf_reset, and renames it to a more
fitting nf_reset_ct().
In a few selected places, add a call to skb_ext_reset to make sure that
no active extensions remain.
I am submitting this for "net", because we're still early in the release
cycle. The patch applies to net-next too, but I think the rename causes
needless divergence between those trees.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* two null pointer dereference fixes
* a fix for preempt-enabled/BHs-enabled (lockdep) splats
(that correctly pointed out a bug)
* a fix for multi-BSSID ordering assumptions
* a fix for the EDMG support, on-stack chandefs need to
be initialized properly (now that they're bigger)
* beacon (head) data from userspace should be validated
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAl2Td78ACgkQB8qZga/f
l8SnIA/9GatOHIbmXb0BE/ojm3FEQlQOfzdO2VgC40Z8oR0qMFIwkWPzbsqy2Qhl
xjzhh35q6iZunwp49LXRH1kDQn8xqo+RKpYDvrBSPvJW7jQj8l3UUK6tGaPL55RN
NN5Tk/nWQVun70qPF/JIFeA/S7GpWJuyAj28hVgyukzNfksaYHqoAZQ1yU1otuou
OmzsrXXzGVO9Xu0DU6U5b6UxcTUHiILLywr0kdE35oUATct7AijrU1E4f94/wmXG
O4S3BMgLG4Ggxqdn+GPNdHLstEH/z0nyoon3LeautkOSEDgAeZoXNAgRGHSzaLdn
YsTZ9mD1uKopSlro0obtyQPYswejnJ1dcEhMV6gpNSUqlf8hrzwzvh1ZxvZwZXpZ
bislxnLcA+t10tkRApYQ0JhpvNm2O2lHlXqWz8tug0szoR/GKawrpPEJXrb/9yxF
PFVI8TzXA0bLkO6clNV3vWWAf2Hg9My/hmPpbuORWdIw3KbpcMPfoWHkhAspTdpO
CmpHurDt1u0Oh/8NawrqUTYXKZkGfseoDXQvQCDOfDCfGl8RPrdthzfPJhh8w4rd
NCJa+WYNbFrvYcwi4FLCdRuO2dQjHLTclmZ/yXcVp8mxG5e8eihEIAfm30pyUxov
uH29GwctmoA9CBYOAfHsEFWJNeGcpLSa9hzogmBygrPh61eoP14=
=nhNe
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2019-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A small list of fixes this time:
* two null pointer dereference fixes
* a fix for preempt-enabled/BHs-enabled (lockdep) splats
(that correctly pointed out a bug)
* a fix for multi-BSSID ordering assumptions
* a fix for the EDMG support, on-stack chandefs need to
be initialized properly (now that they're bigger)
* beacon (head) data from userspace should be validated
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When no other driver selects the devlink library code, ionic
produces a link failure:
drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc':
ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc'
drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register':
ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register'
Add the same 'select' statement that the other drivers use here.
Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resolving a couple of Sphinx documentation warnings
that are generated in the networking section.
- WARNING: document isn't included in any toctree
- WARNING: Title underline too short.
Signed-off-by: Adam Zerella <adam.zerella@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add kselftest-all target to build tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
Current kselftest target builds and runs tests on a development
system which is a developer use-case.
Add kselftest-install target to install tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
This change addresses requests from developers and testers to add
support for installing kselftest from the main Makefile.
In addition, make the install directory the same when install is
run using "make kselftest-install" or by running kselftest_install.sh.
Also fix the INSTALL_PATH variable conflict between main Makefile and
selftests Makefile.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Always acquire tx descriptor spinlock even if a xdp program is not loaded
on the netsec device since ndo_xdp_xmit can run concurrently with
netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen
loading a xdp program on a different device (e.g virtio-net) and
xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if
we do not have a xdp program on it.
Fixes: ba2b232108 ("net: netsec: add XDP support")
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the interface type is P2P_DEVICE or NAN, read the file of
'/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a
NULL pointer dereference. As for those interface type, the
pointer sdata->vif.txq is NULL.
Unable to handle kernel NULL pointer dereference at virtual address 00000011
CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1
task: ffffffc0337e4880 task.stack: ffffff800cd20000
PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[...]
Process cat (pid: 30936, stack limit = 0xffffff800cd20000)
[...]
[<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211]
[<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211]
[<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211]
[<ffffff80082eff94>] full_proxy_read+0x2c/0x48
[<ffffff80081eef00>] __vfs_read+0x2c/0xd4
[<ffffff80081ef084>] vfs_read+0x8c/0x108
[<ffffff80081ef494>] SyS_read+0x40/0x7c
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/1569549796-8223-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the interface is not in MESH mode, the command 'iw wlanx mpath del'
will cause kernel panic.
The root cause is null pointer access in mpp_flush_by_proxy(), as the
pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface.
Unable to handle kernel NULL pointer dereference at virtual address 00000068
[...]
PC is at _raw_spin_lock_bh+0x20/0x5c
LR is at mesh_path_del+0x1c/0x17c [mac80211]
[...]
Process iw (pid: 4537, stack limit = 0xd83e0238)
[...]
[<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211])
[<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat])
[<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c)
[<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac)
[<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34)
[<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204)
[<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370)
[<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84)
[<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228)
[<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70)
[<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44)
Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f)
---[ end trace bbd717600f8f884d ]---
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org
[trim useless data from commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In a few places we don't properly initialize on-stack chandefs,
resulting in EDMG data to be non-zero, which broke things.
Additionally, in a few places we rely on the driver to init the
data completely, but perhaps we shouldn't as non-EDMG drivers
may not initialize the EDMG data, also initialize it there.
Cc: stable@vger.kernel.org
Fixes: 2a38075cd0 ("nl80211: Add support for EDMG channels")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code copying the data assumes that the SSID element is
before the MBSSID element, but since the data is untrusted
from the AP, this cannot be guaranteed.
Validate that this is indeed the case and ignore the MBSSID
otherwise, to avoid having to deal with both cases for the
copy of data that should be between them.
Cc: stable@vger.kernel.org
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently don't validate the beacon head, i.e. the header,
fixed part and elements that are to go in front of the TIM
element. This means that the variable elements there can be
malformed, e.g. have a length exceeding the buffer size, but
most downstream code from this assumes that this has already
been checked.
Add the necessary checks to the netlink policy.
Cc: stable@vger.kernel.org
Fixes: ed1b6cc7f8 ("cfg80211/nl80211: add beacon settings")
Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 7e64db1597.
The thin provisioning feature introduces an IOCTL and the discard support
to allow userspace tools and filesystems to release unused and previously
allocated space respectively.
During some internal performance improvements and further tests, the
release of allocated space revealed some issues that may lead to data
corruption in some configurations when filesystems are mounted with
discard support enabled.
While we're working on a fix and trying to clarify the situation,
this commit reverts the discard support for ESE volumes to prevent
potential data corruption.
Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible that the CCW commands for reading volume and extent pool
information are not supported, either by the storage server (for
dedicated DASDs) or by z/VM (for virtual devices, such as MDISKs).
As a command reject will occur in such a case, the current error
handling leads to a failing online processing and thus the DASD can't be
used at all.
Since the data being read is not essential for an fully operational
DASD, the error handling can be removed. Information about the failing
command is sent to the s390dbf debug feature.
Fixes: c729696bcf ("s390/dasd: Recognise data for ESE volumes")
Cc: <stable@vger.kernel.org> # 5.3
Reported-by: Frank Heimes <frank.heimes@canonical.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All system calls use struct __kernel_timespec instead of the old struct
timespec, but this one was just added with the old-style ABI. Change it
now to enforce the use of __kernel_timespec, avoiding ABI confusion and
the need for compat handlers on 32-bit architectures.
Any user space caller will have to use __kernel_timespec now, but this
is unambiguous and works for any C library regardless of the time_t
definition. A nicer way to specify the timeout would have been a less
ambiguous 64-bit nanosecond value, but I suppose it's too late now to
change that as this would impact both 32-bit and 64-bit users.
Fixes: 5262f56798 ("io_uring: IORING_OP_TIMEOUT support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The loop driver assumes that if the passed in fd is opened with
O_DIRECT, the caller wants to use direct I/O on the loop device.
However, if the underlying block device has a different block size than
the loop block queue, direct I/O can't be enabled. Instead of requiring
userspace to manually change the blocksize and re-enable direct I/O,
just change the queue block sizes to match, as well as the io_min size.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Ahern