Commit Graph

1324 Commits

Author SHA1 Message Date
Linus Torvalds d3dcbe24a0 USB/Thunderbolt changes for 6.1-rc1
Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.
 
 Nothing major in here, lots of little things with new devices supported
 and updates for a few drivers.  Highlights include:
 	- thunderbolt/USB4 devices supported a bit better than before,
 	  and some new ids to enable new hardware devices
 	- USB gadget uvc updates for newer video formats and better v4l
 	  integration (the v4l portions were acked by those maintainers)
 	- typec updates for tiny issues and more typec drivers for new
 	  chips.
 	- xhci tiny updates for minor issues
 	- big usb-serial ftdi_sio driver update to handle new devices
 	  better
 	- lots of tiny dwc3 fixes and updates for the IP block that is
 	  showing up everywhere these days
 	- dts updates for new devices being supported
 	- other tiny janitorial and cleanups fixes for lots of different
 	  USB drivers.  Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0BN9g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yljdgCdH4Fev4Nvf2Nokfv0q0krcRB3YpUAn1aZfpb/
 EbgxsxhPnTJg+mmXyLms
 =IxUy
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...
2022-10-07 16:48:26 -07:00
Greg Kroah-Hartman a956f91247 Merge 6.0-rc4 into usb-next
We need the USB fixes in here and this resolves the merge issue in:
	drivers/usb/dwc3/gadget.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05 08:03:23 +02:00
Greg Kroah-Hartman 35f2e3c267 Merge 6.0-rc4 into tty-next
We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05 07:59:28 +02:00
Heikki Krogerus 4e55e22d3d USB: hcd-pci: Drop the unused id parameter from usb_hcd_pci_probe()
Since the HC driver is now passed to the function with its
own parameter (it used to be picked from id->driver_data),
the id parameter serves no purpose.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220831125052.71584-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 16:08:35 +02:00
Piyush Mehta 66d1c8021e usb: chipidea: Add support for VBUS control with PHY
Some platforms make use of VBUS control over PHY which means controller
driver has to access PHY registers to turn on/off VBUS line.This patch
adds support for such platforms in chipidea.

Flag 'CI_HDRC_PHY_VBUS_CONTROL' added to support VBus control feature.

Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com>
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220822054051.2941282-1-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-31 09:07:52 +02:00
Ilpo Järvinen f6d47fe592 usb: serial: Make ->set_termios() old ktermios const
There should be no reason to adjust old ktermios which is going to get
discarded anyway.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220816115739.10928-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30 14:22:35 +02:00
Gene Chen 2c8cc0946c usb: typec: tcpci: Move function "tcpci_to_typec_cc" to common
Move transition function "tcpci_to_typec_cc" to common header

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Link: https://lore.kernel.org/r/20220805071714.150882-7-gene.chen.richtek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-19 11:05:12 +02:00
Pablo Sun c1e5c2f0cb usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.

According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.

For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:

        dp->alt->vdo=0x140045

The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.

This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.

To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.

Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-18 21:20:07 +02:00
Linus Torvalds c1c76700a0 SPDX changes for 6.0-rc1
Here is the set of SPDX comment updates for 6.0-rc1.
 
 Nothing huge here, just a number of updated SPDX license tags and
 cleanups based on the review of a number of common patterns in GPLv2
 boilerplate text.  Also included in here are a few other minor updates,
 2 USB files, and one Documentation file update to get the SPDX lines
 correct.
 
 All of these have been in the linux-next tree for a very long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
 4AKdqbiBNlFbCroQwmeQ
 =v1sg
 -----END PGP SIGNATURE-----

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...
2022-08-04 12:12:54 -07:00
Linus Torvalds 9e2e5ea3b2 USB / Thunderbolt changes for 6.0-rc1
Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
 
 Lots of little things here, nothing major, just constant development on
 some new hardware support and cleanups of older drivers.  Highlights of
 this pull request are:
 	- lots of typec changes and improvements for new hardware
 	- new gadget controller driver
 	- thunderbolt support for new hardware
 	- the normal set of new usb-serial device ids and cleanups
 	- loads of dwc3 controller fixes and improvements
 	- mtu3 driver updates
 	- testusb fixes for longtime issues (not many people use this
 	  tool it seems.)
 	- minor driver fixes and improvements over the USB tree
 	- chromeos platform driver changes were added and then reverted
 	  as they depened on some typec changes, but the cross-tree
 	  merges caused problems so they will come back later through
 	  the platform tree.
 
 All of these have been in linux-next for a while now with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup5Rg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yko/ACfYD9mdlr4WleUpVw5/uNywN6sL9EAn1tv0V8W
 cUTAoWxAf5orClAC22ZU
 =Vcqd
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...
2022-08-04 11:41:28 -07:00
Jakub Kicinski 5f10376b6b add missing includes and forward declarations to networking includes under linux/
Similarly to a recent include/net/ cleanup, this patch adds
missing includes to networking headers under include/linux.
All these problems are currently masked by the existing users
including the missing dependency before the broken header.

Link: https://lore.kernel.org/all/20220723045755.2676857-1-kuba@kernel.org/ v1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20220726215652.158167-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-28 11:29:36 +02:00
Weitao Wang 26c6c2f8a9 USB: HCD: Fix URB giveback issue in tasklet function
Usb core introduce the mechanism of giveback of URB in tasklet context to
reduce hardware interrupt handling time. On some test situation(such as
FIO with 4KB block size), when tasklet callback function called to
giveback URB, interrupt handler add URB node to the bh->head list also.
If check bh->head list again after finish all URB giveback of local_list,
then it may introduce a "dynamic balance" between giveback URB and add URB
to bh->head list. This tasklet callback function may not exit for a long
time, which will cause other tasklet function calls to be delayed. Some
real-time applications(such as KB and Mouse) will see noticeable lag.

In order to prevent the tasklet function from occupying the cpu for a long
time at a time, new URBS will not be added to the local_list even though
the bh->head list is not empty. But also need to ensure the left URB
giveback to be processed in time, so add a member high_prio for structure
giveback_urb_bh to prioritize tasklet and schelule this tasklet again if
bh->head list is not empty.

At the same time, we are able to prioritize tasklet through structure
member high_prio. So, replace the local high_prio_bh variable with this
structure member in usb_hcd_giveback_urb.

Fixes: 94dfd7edfd ("USB: HCD: support giveback of URB in tasklet context")
Cc: stable <stable@kernel.org>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20220726074918.5114-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 14:30:19 +02:00
Łukasz Spintzyk 5588d62802 net/cdc_ncm: Increase NTB max RX/TX values to 64kb
DisplayLink ethernet devices require NTB buffers larger then 32kb
in order to run with highest performance.

This patch is changing upper limit of the rx and tx buffers.
Those buffers are initialized with CDC_NCM_NTB_DEF_SIZE_RX and
CDC_NCM_NTB_DEF_SIZE_TX which is 16kb so by default no device is
affected by increased limit.

Rx and tx buffer is increased under two conditions:
 - Device need to advertise that it supports higher buffer size in
   dwNtbMaxInMaxSize and dwNtbMaxOutMaxSize.
 - cdc_ncm/rx_max and cdc_ncm/tx_max driver parameters must be adjusted
   with udev rule or ethtool.

Summary of testing and performance results:
Tests were performed on following devices:
 - DisplayLink DL-3xxx family device
 - DisplayLink DL-6xxx family device
 - ASUS USB-C2500 2.5G USB3 ethernet adapter
 - Plugable USB3 1G USB3 ethernet adapter
 - EDIMAX EU-4307 USB-C ethernet adapter
 - Dell DBQBCBC064 USB-C ethernet adapter

Performance measurements were done with:
 - iperf3 between two linux boxes
 - http://openspeedtest.com/ instance running on local test machine

Insights from tests results:
 - All except one from third party usb adapters were not affected by
   increased buffer size to their advertised dwNtbOutMaxSize and
   dwNtbInMaxSize.
   Devices were generally reaching 912-940Mbps both download and upload.

   Only EDIMAX adapter experienced decreased download size from
   929Mbps to 827Mbps with iper3, with openspeedtest decrease was from
   968Mbps to 886Mbps.

 - DisplayLink DL-3xxx family devices experienced performance increase
   with iperf3 download from 300Mbps to 870Mbps and
   upload from 782Mbps to 844Mbps.
   With openspeedtest download increased from 556Mbps to 873Mbps
   and upload from 727Mbps to 973Mbps

 - DiplayLink DL-6xxx family devices are not affected by
   increased buffer size.

Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220720060518.541-2-lukasz.spintzyk@synaptics.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-21 13:20:28 +02:00
Prashant Malani ddaf8d96f9 usb: typec: Add support for retimers
Introduce a retimer device class and associated functions that register
and use retimer "switch" devices. These operate in a manner similar to
the "mode-switch" and help configure retimers that exist between the
Type-C connector and host controller(s).

Type C ports can be linked to retimers using firmware node device
references (again, in a manner similar to "mode-switch").

There are no new sysfs files being created; there is the new retimer
class directory, but there are no class-specific files being created
there.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220711072333.2064341-2-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-14 16:24:05 +02:00
Matthias Kaehlcke 8bc063641c usb: misc: Add onboard_usb_hub driver
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.

Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.

Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).

Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-08 14:53:50 +02:00
Xin Ji 7963d4d710 usb: typec: tcpci: move tcpci.h to include/linux/usb/
USB PD controllers which consisting of a microcontroller (acting as the TCPM)
and a port controller (TCPC) - may require that the driver for the PD
controller accesses directly also the on-chip port controller in some cases.

Move tcpci.h to include/linux/usb/ is convenience access TCPC registers.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Xin Ji <xji@analogixsemi.com>

Link: https://lore.kernel.org/r/20220706083433.2415524-1-xji@analogixsemi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-08 14:51:16 +02:00
Mauro Carvalho Chehab ae92b1c843 usb: typec_altmode: add a missing "@" at a kernel-doc parameter
Without that, the parameter is not properly parsed:
	include/linux/usb/typec_altmode.h:132: warning: Function parameter or member 'altmode' not described in 'typec_altmode_get_orientation'

Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/70dc4c5d744cf1fe9a0efe6b85deaa0489628282.1656409369.git.mchehab@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-29 21:00:16 +02:00
Prashant Malani a37599ebfb usb: typec: mux: Add CONFIG guards for functions
There are some drivers that can use the Type C mux API, but don't have
to. Introduce CONFIG guards for the mux functions so that drivers can
include the header file and not run into compilation errors on systems
which don't have CONFIG_TYPEC enabled. When CONFIG_TYPEC is not enabled,
the Type C mux functions will be stub versions of the original calls.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Link: https://lore.kernel.org/r/20220615172129.1314056-3-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-21 16:38:14 +02:00
Heikki Krogerus a7cff92f06 usb: typec: USB Power Delivery helpers for ports and partners
All the USB Type-C Connector Class devices are protected, so
the drivers can not directly access them. This will adds a
few helpers that can be used to link the ports and partners
to the correct USB Power Delivery objects.

For ports a new optional sysfs attribute file is also added
that can be used to select the USB Power Delivery
capabilities that the port will advertise to the partner.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-12 06:49:47 +02:00
Heikki Krogerus 662a60102c usb: typec: Separate USB Power Delivery from USB Type-C
Introducing a small device class for USB Power Delivery.
The idea with it is that we do not mix any more USB Power
Delivery information into the USB Type-C connectors only.
This separation will make it possible to register USB Power
Delivery devices also from other places, for example from
USB Type-C Bridges (see USB Type-C Bridge Specification).

The device class will not always deal with only the messages
and objects that were negotiated with the partner, but
instead messages and objects that can be used in the
negotiation. That allows the USB PD devices to be shared and
reconfigured. The ports can decide which objects are to be
advertised to the partner before the contract is negotiated.
It is also possible to allow the user space to make that
decision if needed.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-12 06:49:47 +02:00
Christophe JAILLET 3e00a22fdc USB: Follow-up to SPDX GPL-2.0+ identifiers addition - remove now useless comments
All these files have been updated in the commit given in the Fixes: tag
below.

When the SPDX-License-Identifier: has been added, the corresponding text at
the beginning of the files has not been deleted.
All these texts are about GPL-2.0+, with different variation in the
wording.

Remove these now useless lines to save some LoC.

Fixes: 5fd54ace47 ("USB: add SPDX identifiers to all remaining files in drivers/usb/")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 11:24:37 +02:00
Christophe JAILLET e3fa404a26 USB: Follow-up to SPDX identifiers addition - remove now useless comments
All these files have been updated in the commit given in the Fixes: tag
below.

When the SPDX-License-Identifier: has been added, the corresponding text at
the beginning of the files has not been deleted.
All these texts are about GPL-2.0, with different variation in the wording.

Remove these now useless lines to save some LoC.

Fixes: 5fd54ace47 ("USB: add SPDX identifiers to all remaining files in drivers/usb/")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 11:24:36 +02:00
Linus Torvalds 54c2cc7919 USB / Thunderbolt changes for 5.19-rc1
Here is the "big" set of USB and Thunderbolt driver changes for
 5.18-rc1.  For the most part it's been a quiet development cycle for the
 USB core, but there are the usual "hot spots" of development activity.
 
 Included in here are:
 	- Thunderbolt driver updates:
 		- fixes for devices without displayport adapters
 		- lane bonding support and improvements
 		- other minor changes based on device testing
 	- dwc3 gadget driver changes.  It seems this driver will never
 	  be finished given that the IP core is showing up in zillions
 	  of new devices and each implementation decides to do something
 	  different with it...
 	- uvc gadget driver updates as more devices start to use and
 	  rely on this hardware as well
 	- usb_maxpacket() api changes to remove an unneeded and unused
 	  parameter.
 	- usb-serial driver device id updates and small cleanups
 	- typec cleanups and fixes based on device testing
 	- device tree updates for usb properties
 	- lots of other small fixes and driver updates.
 
 All of these have been in linux-next for weeks with no reported
 problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpnZGw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymQhwCeLVANsQjBcL4ys4skl+1In17y28gAn3rEZ7rQ
 Yv4uP9zadUqg3Cx0vjgf
 =3s5s
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt driver changes for
  5.18-rc1. For the most part it's been a quiet development cycle for
  the USB core, but there are the usual "hot spots" of development
  activity.

  Included in here are:

   - Thunderbolt driver updates:
       - fixes for devices without displayport adapters
       - lane bonding support and improvements
       - other minor changes based on device testing

   - dwc3 gadget driver changes.

     It seems this driver will never be finished given that the IP core
     is showing up in zillions of new devices and each implementation
     decides to do something different with it...

   - uvc gadget driver updates as more devices start to use and rely on
     this hardware as well

   - usb_maxpacket() api changes to remove an unneeded and unused
     parameter.

   - usb-serial driver device id updates and small cleanups

   - typec cleanups and fixes based on device testing

   - device tree updates for usb properties

   - lots of other small fixes and driver updates.

  All of these have been in linux-next for weeks with no reported
  problems"

* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  USB: new quirk for Dell Gen 2 devices
  usb: dwc3: core: Add error log when core soft reset failed
  usb: dwc3: gadget: Move null pinter check to proper place
  usb: hub: Simplify error and success path in port_over_current_notify
  usb: cdns3: allocate TX FIFO size according to composite EP number
  usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
  usb: Probe EHCI, OHCI controllers asynchronously
  usb: isp1760: Fix out-of-bounds array access
  xhci: Don't defer primary roothub registration if there is only one roothub
  USB: serial: option: add Quectel BG95 modem
  USB: serial: pl2303: fix type detection for odd device
  xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
  xhci: Remove quirk for over 10 year old evaluation hardware
  xhci: prevent U2 link power state if Intel tier policy prevented U1
  xhci: use generic command timer for stop endpoint commands.
  usb: host: xhci-plat: omit shared hcd if either root hub has no ports
  usb: host: xhci-plat: prepare operation w/o shared hcd
  usb: host: xhci-plat: create shared hcd after having added main hcd
  xhci: prepare for operation w/o shared hcd
  xhci: factor out parts of xhci_gen_setup()
  ...
2022-06-03 11:17:49 -07:00
Kishon Vijay Abraham I a44623d927 usb: core: hcd: Add support for deferring roothub registration
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

This patch has been added and reverted earier as it triggered a race
in usb device enumeration.
That race is now fixed in 5.16-rc3, and in stable back to 5.4
commit 6cca13de26 ("usb: hub: Fix locking issues with address0_mutex")
commit 6ae6dc22d2 ("usb: hub: Fix usb enumeration issue due to address0
race")

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12 13:59:59 +02:00
Alan Stern f9d76d1507 USB: gadget: Add ID numbers to gadget names
Putting USB gadgets on a new bus of their own encounters a problem
when multiple gadgets are present: They all have the same name!  The
driver core fails with a "sys: cannot create duplicate filename" error
when creating any of the /sys/bus/gadget/devices/<gadget-name>
symbolic links after the first.

This patch fixes the problem by adding a ".N" suffix to each gadget's
name when the gadget is registered (where N is a unique ID number),
thus making the names distinct.

Reported-and-tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Link: https://lore.kernel.org/r/YnqKAXKyp9Vq/pbn@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-11 18:59:25 +02:00
Jakub Kicinski c8227d568d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
tools/testing/selftests/net/forwarding/Makefile
  f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
  50fe062c80 ("selftests: forwarding: new test, verify host mdb entries")
https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05 13:03:18 -07:00
Greg Kroah-Hartman 67a7570ad3 Revert "usb: misc: Add onboard_usb_hub driver"
This reverts commit 0298b4b95c.

The series still has built errors as reported in linux-next, so revert
it for now.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03 16:48:13 +02:00
Greg Kroah-Hartman f2b6e79c73 Revert "usb: core: hcd: Create platform devices for onboard hubs in probe()"
This reverts commit c40b62216c.

The series still has built errors as reported in linux-next, so revert
it for now.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20220502210728.0b36f3cd@canb.auug.org.au
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03 16:48:09 +02:00
Greg Kroah-Hartman b9c92fb4aa Linux 5.18-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
 o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
 KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
 4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
 chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
 odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
 J3+wdek=
 =39Ca
 -----END PGP SIGNATURE-----

Merge 5.18-rc5 into usb-next

We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-03 16:35:26 +02:00
Matthias Kaehlcke c40b62216c usb: core: hcd: Create platform devices for onboard hubs in probe()
Call onboard_hub_create/destroy_pdevs() from usb_add/remove_hcd()
for primary HCDs to create/destroy platform devices for onboard
USB hubs that may be connected to the root hub of the controller.
These functions are a NOP unless CONFIG_USB_ONBOARD_HUB=y/m.

Also add a field to struct usb_hcd to keep track of the onboard hub
platform devices that are owned by the HCD.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.3.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:01:12 +02:00
Matthias Kaehlcke 0298b4b95c usb: misc: Add onboard_usb_hub driver
The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.

Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.

Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).

Note: the current series only supports hubs connected directly to
a root hub, support for other configurations could be added if
needed.

Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20220217104219.v21.2.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:01:12 +02:00
Alan Stern fc274c1e99 USB: gadget: Add a new bus for gadgets
This patch adds a "gadget" bus and uses it for registering gadgets and
their drivers.  From now on, bindings will be managed by the driver
core rather than through ad-hoc manipulations in the UDC core.

As part of this change, the driver_pending_list is removed.  The UDC
core won't need to keep track of unbound drivers for later binding,
because the driver core handles all of that for us.

However, we do need one new feature: a way to prevent gadget drivers
from being bound to more than one gadget at a time.  The existing code
does this automatically, but the driver core doesn't -- it's perfectly
happy to bind a single driver to all the matching devices on the bus.
The patch adds a new bitflag to the usb_gadget_driver structure for
this purpose.

A nice side effect of this change is a reduction in the total lines of
code, since now the driver core will do part of the work that the UDC
used to do.

A possible future patch could add udc devices to the gadget bus, say
as a separate device type.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSpdxaDNeC2BBOf@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:00:16 +02:00
Alan Stern af1969a2d7 USB: gadget: Rename usb_gadget_probe_driver()
In preparation for adding a "gadget" bus, this patch renames
usb_gadget_probe_driver() to usb_gadget_register_driver().  The new
name will be more accurate, since gadget drivers will be registered on
the gadget bus and the probing will be done by the driver core, not
the UDC core.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YmSc29YZvxgT5fEJ@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:00:13 +02:00
Bjorn Andersson 713fd49b43 usb: typec: mux: Introduce indirection
Rather than directly exposing the implementation's representation of the
typec muxes to the controller/clients, introduce an indirection object.

This enables the introduction of turning this relationship into a
one-to-many in the following patch.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220422222351.1297276-5-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:47:13 +02:00
Borislav Petkov 8d084b2eae usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
Fix:

  drivers/usb/typec/tcpm/tcpm.c: In function ‘run_state_machine’:
  drivers/usb/typec/tcpm/tcpm.c:4724:3: error: case label does not reduce to an integer constant
     case BDO_MODE_TESTDATA:
     ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Link: https://lore.kernel.org/r/20220405151517.29753-8-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21 18:33:56 +02:00
Lech Perczak 36e747972d rndis_host: enable the bogus MAC fixup for ZTE devices from cdc_ether
Certain ZTE modems, namely: MF823. MF831, MF910, built-in modem from
MF286R, expose both CDC-ECM and RNDIS network interfaces.
They have a trait of ignoring the locally-administered MAC address
configured on the interface both in CDC-ECM and RNDIS part,
and this leads to dropping of incoming traffic by the host.
However, the workaround was only present in CDC-ECM, and MF286R
explicitly requires it in RNDIS mode.

Re-use the workaround in rndis_host as well, to fix operation of MF286R
module, some versions of which expose only the RNDIS interface. Do so by
introducing new flag, RNDIS_DRIVER_DATA_DST_MAC_FIXUP, and testing for it
in rndis_rx_fixup. This is required, as RNDIS uses frame batching, and all
of the packets inside the batch need the fixup. This might introduce a
performance penalty, because test is done for every returned Ethernet
frame.

Apply the workaround to both "flavors" of RNDIS interfaces, as older ZTE
modems, like MF823 found in the wild, report the USB_CLASS_COMM class
interfaces, while MF286R reports USB_CLASS_WIRELESS_CONTROLLER.

Suggested-by: Bjørn Mork <bjorn@mork.no>
Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14 15:08:12 +02:00
Lech Perczak 64b97df995 cdc_ether: export usbnet_cdc_zte_rx_fixup
Commit bfe9b9d2df ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduces a workaround for certain ZTE modems reporting invalid MAC
addresses over CDC-ECM.
The same issue was present on their RNDIS interface,which was fixed in
commit a5a18bdf74 ("rndis_host: Set valid random MAC on buggy devices").

However, internal modem of ZTE MF286R router, on its RNDIS interface, also
exhibits a second issue fixed already in CDC-ECM, of the device not
respecting configured random MAC address. In order to share the fixup for
this with rndis_host driver, export the workaround function, which will
be re-used in the following commit in rndis_host.

Cc: Kristian Evensen <kristian.evensen@gmail.com>
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-14 15:08:12 +02:00
Peter Zijlstra b0ae33a2d2 usb: early: xhci-dbc: Remove duplicate keep parsing
The generic earlyprintk= parsing already parses the optional ",keep",
no need to duplicate that in the xdbc driver.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220304152135.975568860@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-15 18:20:34 +01:00
Samuel Holland 2e7dfb0e9c usb: typec: Factor out non-PD fwnode properties
Basic programmable non-PD Type-C port controllers do not need the full
TCPM library, but they share the same devicetree binding and the same
typec_capability structure. Factor out a helper for parsing those
properties which map to fields in struct typec_capability, so the code
can be shared between TCPM and basic non-TCPM drivers.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220214050118.61015-4-samuel@sholland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17 16:21:57 +01:00
Linyu Yuan 945c37ed56 usb: roles: fix include/linux/usb/role.h compile issue
when CONFIG_USB_ROLE_SWITCH is not defined,
add usb_role_switch_find_by_fwnode() definition which return NULL.

Fixes: c6919d5e0c ("usb: roles: Add usb_role_switch_find_by_fwnode()")
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1641818608-25039-1-git-send-email-quic_linyyuan@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-25 18:30:15 +01:00
Ingo Molnar 01ec4a2e8f headers/deps: USB: Optimize <linux/usb/ch9.h> dependencies, remove <linux/device.h>
The <linux/usb/ch9.h> header is used over 1,400 times in a typical distro
build, but few of its users actually need the full <linux/device.h> header.

          --------------------------------------------------------------------
          | Combined, preprocessed C code size of header, without line markers,
          | with comments stripped:
          -------------------------
  before: | #include <linux/usb/ch9.h>              | LOC:  7,078 | headers:  172
   after: | #include <linux/usb/ch9.h>              | LOC:    812 | headers:   38

Remove it and add it to the places that need it.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05 16:21:44 +01:00
Heikki Krogerus 730b49aac4 usb: typec: port-mapper: Convert to the component framework
Instead of trying to keep track of the connections to the
USB Type-C connectors separately, letting the component
framework take care of that.

From now on every USB Type-C connector will register itself
as "aggregate" - component master - and anything that can be
connected to it inside the system can then simply register
itself as a generic component.

The matching of the components and the connector shall rely
on ACPI _PLD initially. Before registering itself as the
aggregate, the connector will find all other ACPI devices
that have matching _PLD crc hash with it (matching value in
the pld_crc member of struct acpi_device), and add a
component match entry for each one of them. Because only
ACPI is supported for now, the driver shall only be build
when ACPI is supported.

This removes the need for the custom API that the driver
exposed. The components and the connector can therefore
exist completely independently of each other. The order in
which they are registered, as well as are they modules or
not, is now irrelevant.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-30 12:13:04 +01:00
Greg Kroah-Hartman 439b08c57c Revert "usb: core: hcd: Add support for deferring roothub registration"
This reverts commit 58877b0824.

It has been reported to be causing problems in Arch and Fedora bug
reports.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576
Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-05 08:41:02 +01:00
Dmitry Osipenko c1baf6c591 usb: phy: tegra: Support OTG mode programming
Support programming USB PHY into OTG mode.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210912181718.1328-5-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-05 12:47:49 +02:00
Kishon Vijay Abraham I 58877b0824 usb: core: hcd: Add support for deferring roothub registration
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.

CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-14 10:41:30 +02:00
Kees Cook e4788edc73 USB: EHCI: Add alias for Broadcom INSNREG
Refactor struct ehci_regs to avoid accessing beyond the end of
port_status. This change results in no difference in the final
object code.

Avoids several warnings when building with -Warray-bounds:

drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset':
drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds]
  113 |  ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
      |                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/ehci.h:274,
                 from drivers/usb/host/ehci-brcm.c:15:
./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status'
  132 |   u32 port_status[HCS_N_PORTS_MAX];
      |       ^~~~~~~~~~~

Note that the documentation around this proprietary register was
confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset
would be 0x80 (not 0x90). The comments have been adjusted to fix this
apparent typo.

Fixes: 9df231511b ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Cc: Al Cooper <alcooperx@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818173018.2259231-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18 22:28:28 +02:00
Kees Cook 72dd184323 USB: EHCI: Add register array bounds to HCS ports
The original EHCI register struct used a trailing 0-element array for
addressing the N_PORTS-many available registers. However, after commit
a46af4ebf9 ("USB: EHCI: define extension registers like normal ones")
the 0-element array started to overlap the USBMODE extension register.

To avoid future compile-time warnings about accessing indexes within a
0-element array, rearrange the struct to actually describe the expected
layout (max 15 registers) with a union. All offsets remain the same, and
bounds checking becomes possible on accesses to port_status and hostpc.

There are no binary differences, and struct offsets continue to match.
"pahole --hex -C ehci_regs" before:

struct ehci_regs {
	u32                        command;              /*     0   0x4 */
	u32                        status;               /*   0x4   0x4 */
	u32                        intr_enable;          /*   0x8   0x4 */
	u32                        frame_index;          /*   0xc   0x4 */
	u32                        segment;              /*  0x10   0x4 */
	u32                        frame_list;           /*  0x14   0x4 */
	u32                        async_next;           /*  0x18   0x4 */
	u32                        reserved1[2];         /*  0x1c   0x8 */
	u32                        txfill_tuning;        /*  0x24   0x4 */
	u32                        reserved2[6];         /*  0x28  0x18 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	u32                        configured_flag;      /*  0x40   0x4 */
	u32                        port_status[0];       /*  0x44     0 */
	u32                        reserved3[9];         /*  0x44  0x24 */
	u32                        usbmode;              /*  0x68   0x4 */
	u32                        reserved4[6];         /*  0x6c  0x18 */
	/* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
	u32                        hostpc[0];            /*  0x84     0 */
	u32                        reserved5[17];        /*  0x84  0x44 */
	/* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */
	u32                        usbmode_ex;           /*  0xc8   0x4 */

	/* size: 204, cachelines: 4, members: 18 */
	/* last cacheline: 12 bytes */
};

after:

struct ehci_regs {
	u32                        command;              /*     0   0x4 */
	u32                        status;               /*   0x4   0x4 */
	u32                        intr_enable;          /*   0x8   0x4 */
	u32                        frame_index;          /*   0xc   0x4 */
	u32                        segment;              /*  0x10   0x4 */
	u32                        frame_list;           /*  0x14   0x4 */
	u32                        async_next;           /*  0x18   0x4 */
	u32                        reserved1[2];         /*  0x1c   0x8 */
	u32                        txfill_tuning;        /*  0x24   0x4 */
	u32                        reserved2[6];         /*  0x28  0x18 */
	/* --- cacheline 1 boundary (64 bytes) --- */
	u32                        configured_flag;      /*  0x40   0x4 */
	union {
		u32                port_status[15];      /*  0x44  0x3c */
		struct {
			u32        reserved3[9];         /*  0x44  0x24 */
			u32        usbmode;              /*  0x68   0x4 */
		};                                       /*  0x44  0x28 */
	};                                               /*  0x44  0x3c */
	/* --- cacheline 2 boundary (128 bytes) --- */
	u32                        reserved4;            /*  0x80   0x4 */
	u32                        hostpc[15];           /*  0x84  0x3c */
	/* --- cacheline 3 boundary (192 bytes) --- */
	u32                        reserved5[2];         /*  0xc0   0x8 */
	u32                        usbmode_ex;           /*  0xc8   0x4 */

	/* size: 204, cachelines: 4, members: 16 */
	/* last cacheline: 12 bytes */
};

With this fixed, adding -Wzero-length-bounds to the build no longer
produces several warnings like this:

In file included from drivers/usb/host/ehci-hcd.c:306:
drivers/usb/host/ehci-hub.c: In function 'ehci_port_handed_over':
drivers/usb/host/ehci-hub.c:1194:8: warning: array subscript '<unknown>' is outside the bounds of an interior zero-length array 'u32[0]' {aka 'unsigned int[]'} [-Wzero-length-bounds]
 1194 |  reg = &ehci->regs->port_status[portnum - 1];
      |        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/ehci.h:274,
                 from drivers/usb/host/ehci-hcd.c:97:
./include/linux/usb/ehci_def.h:130:7: note: while referencing 'port_status'
  130 |  u32  port_status[0]; /* up to N_PORTS */
      |       ^~~~~~~~~~~

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Cooper <alcooperx@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818173018.2259231-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-18 22:28:27 +02:00
Chunfeng Yun 97d99f7e8f usb: gadget: remove unnecessary AND operation when get ep maxp
usb_endpoint_maxp() already returns actual max packet size, no need
to AND 0x7ff.

Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1628836253-7432-7-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13 13:05:51 +02:00
Greg Kroah-Hartman 73e19de7b7 Merge 5.14-rc5 into usb-next
We need the usb fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09 08:12:09 +02:00
Dmitry Osipenko bf88fef0b6 usb: otg-fsm: Fix hrtimer list corruption
The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.

 Unable to handle kernel NULL pointer dereference at virtual address 00000126)
 ...
 PC is at __run_timers.part.0+0x150/0x228
 LR is at __next_timer_interrupt+0x51/0x9c
 ...
 (__run_timers.part.0) from [<c0187a2b>] (run_timer_softirq+0x2f/0x50)
 (run_timer_softirq) from [<c01013ad>] (__do_softirq+0xd5/0x2f0)
 (__do_softirq) from [<c012589b>] (irq_exit+0xab/0xb8)
 (irq_exit) from [<c0170341>] (handle_domain_irq+0x45/0x60)
 (handle_domain_irq) from [<c04c4a43>] (gic_handle_irq+0x6b/0x7c)
 (gic_handle_irq) from [<c0100b65>] (__irq_svc+0x65/0xac)

Cc: stable@vger.kernel.org
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27 16:31:31 +02:00