Need to use default pic info when get pic info fail.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Steve Cho <stevecho@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For vp8 not support 4K, need to disable it.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Needs to use mediatek compressed mode for mt8192 decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Getting supported output and capture queue format types according
to decoder capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Supported output and capture format types for mt8192 are different
with mt8183. Redefine parameters to store them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For lat and core decode in parallel, need to get capture buffer
when core start to decode and put capture buffer to display
list when core decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
call vb2_set_plane_payload to set each plane bytesused in buf prepare,
need not to set independently for stateless and statefull architectures.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Supported max resolution for different platforms are not the same: 2K
or 4K, getting it according to dec_capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Different capture buffer format has different buffer size, need to get
real buffer size according to buffer type from scp.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MT8173 platform use vpu firmware, mt8183/mt8192 will use scp
firmware instead, using chip name is not reasonable to separate
different firmware architecture. Using firmware type is much better.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lock, power and clock are highly coupled operations. Adds vdec
enable/disable hardware helpers and uses them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Tzung-Bi Shih<tzungbi@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Will return -EINVAL using standard framework api when test stateless
decoder with cmd VIDIOC_(TRY)DECODER_CMD. Disable them to adjust v4l2
compliance test for user driver(GStreamer/Chrome) won't use decoder cmd.
Fixes: 8cdc3794b2 ("media: mtk-vcodec: vdec: support stateless API")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the physical address changes (i.e. becomes invalid, then valid again)
while the adapter is still claiming free logical addresses, then trigger
a reconfiguration since any claimed LAs may now be stale.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.
Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.
This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If, while trying to claim a free logical address, a POLL message
times out, then abort this process. A CEC_TX_STATUS_TIMEOUT
should be handled the same as a CEC_TX_STATUS_ABORTED.
This avoids a situation where transmits time out due to a
driver or hardware bug and it takes ages before the attempt
to find available free logical addresses finishes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The __cec_s_log_addrs() function can configure or unconfigure the
adapter. The ioctl handler in cec-api.c will prevent it from being
called to configure the adapter if it was already configured (or in
the process of configuring). But it can still be called to unconfigure
an already unconfigured adapter, and it didn't check for that.
This can cause cec_activate_cnt_dec() to be called too often, causing
a WARN_ON.
Instead first check if adap->log_addrs.num_log_addrs == 0 and return
since in that case the adapter is already unconfigured.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
It's OK to keep the pending pin events when disabling or
enabling the 'adapter'. Zeroing this can cause a race condition
if this happens when the pin kthread is handling a pin event
and calls atomic_dec later, causing work_pin_num_events to become
negative.
Just leave pending events in the queue, they'll be read eventually.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When the adap_enable callback is called the adap->lock is held.
When disabling the adapter it attempts to stop the kthread that
deals with receiving and transmitting messages. However, kthread_stop
waits for the thread to stop, so all that time adap->lock is held.
Unfortunately, the kernel thread itself can call functions that take
that same lock, so a deadlock can occur.
Change the logic to keep the kernel thread running and instead when
disabling the adapter, just set the pin to high, go to idle and then
to state OFF and disable the interrupt. Only stop the kernel thread
when the adapter is deleted.
This way disabling the adapter will not wait for anything and the
deadlock is avoided.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.
Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.
Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.
Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.
Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.
Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.
Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.
Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.
Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497
Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The point of using get/put_device() is to keep references
for as long as the device may be in use. That means dropping
them must be the penultimate action right before freeing the memory.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The timer will report events for an input device.
Reporting events for an unregistered device is bad.
Hence the timer must be killed first.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
GFP_NOIO is fine here.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix smatch warning:
drivers/media/i2c/s5k6a3.c:234 __s5k6a3_power_on() warn: 'sensor->clock' from clk_prepare_enable() not released on lines: 234.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes smatch warning:
drivers/media/i2c/ccs/ccs-core.c:1676 ccs_power_on() warn: 'sensor->ext_clk' from clk_prepare_enable() not released on lines: 1606.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes smatch warning:
drivers/media/pci/cx25821/cx25821-alsa.c:768 cx25821_audio_initdev() warn: 'dev->pci->irq' from request_irq() not released on lines: 768.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
G/S_PARM doesn't make sense for the capture queue of a stateful encoder,
unless V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set to reserve hardware
resources.
Otherwise it will fail the v4l2-compliance
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
when error occurs, driver set error flag,
and driver need to wake up the poll wait
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
With this, the csi2dc will take part in the media pipeline graph walk
and validate the links with it's entities.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Compact the list array to be more readable.
No other changes, only cosmetic.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The AWB workqueue runs in a kernel thread and needs to be synchronized
w.r.t. the streaming status.
It is possible that streaming is stopped while the AWB workq is running.
In this case it is likely that the check for vb2_start_streaming_called is
done at one point in time, but the AWB computations are done later,
including a call to isc_update_profile, which requires streaming to be
started.
Thus , isc_update_profile will fail if during this operation sequence the
streaming was stopped.
To solve this issue, a mutex is added, that will serialize the awb work and
streaming stopping, with the mention that either streaming is stopped
completely including termination of the last frame is done, and after that
the AWB work can check stream status and stop; either first AWB work is
completed and after that the streaming can stop correctly.
The awb spin lock cannot be used since this spinlock is taken in the same
context and using it in the stop streaming will result in a recursion BUG.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
While this does not happen in production, this check should be done
versus the mask, as checking with the YCYC value may not include
some bits that may be set.
It is correct and safe to check the whole mask.
Fixes: 123aaf816b ("media: atmel: atmel-sama5d2-isc: fix YUYV format")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove duplicate comments which are already in place before the struct
definition.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In s_fmt_vid_cap, we should check if vb2_is_busy and return EBUSY,
not check if it's streaming to return the busy state.
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
During experiments with libcamera, it looks like vb2_is_streaming returns
true before our start streaming is called.
Order of operations is streamon -> queue -> start_streaming
ISC would have started the DMA immediately when a buffer is being added
to the vbqueue if the queue is streaming.
It is more safe to start the DMA after the start streaming of the driver is
called.
Thus, even if vb2queue is streaming, add the buffer to the dma queue of the
driver instead of actually starting the DMA process, if the start streaming
has not been called yet.
Tho achieve this, we have to use vb2_start_streaming_called instead of
vb2_is_streaming.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vertical subsampling factor is currently not considered in the
offset calculation for plane cropping done in rpf_configure_partition.
This causes a distortion (shift of the color plane) when formats with
the vsub factor larger than 1 are used (e.g. NV12, see
vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor
for all planes except plane 0 (luminance).
Drop generalization of the offset calculation to reduce the binary size.
Fixes: e5ad37b64d ("[media] v4l: vsp1: Add cropping support")
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the new vb2_queue_is_busy() helper to replace the open-coded
version.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the vb2_fop_release() helper to replace the open-coded version. The
video->lock is assigned to the queue lock, used by vb2_fop_release(), so
the only functional difference is that v4l2_fh_release() is now called
before vsp1_device_put(). This should be harmless.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vb2 queue ownership is managed by the ioctl handler helpers
(vb2_ioctl_*). There are however use cases where drivers can benefit
from checking queue ownership, for instance when open-coding an ioctl
handler that needs to perform additional checks before calling the
corresponding vb2 operation.
Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header,
and change its first argument to a struct vb2_queue pointer as the
function name implies it operates on a queue, not a video_device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace the hardcoded MIPI CSI-2 data types with macros from
mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
the output buffer count should >= min_buffer_out
the capture buffer count should >= min_buffer_cap
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In stk_camera_read_reg() a single byte buffer is alloc-ed and
freed on every function call. Since the size is known,
move the buffer to the struct stk_camera where it will be alloc-ed
and freed once.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries
frame intervals for frame sizes unsupported by the encoder. Fixes the
following v4l2-compliance failure:
fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16
fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Set default colorspace to SRGB for JPEG encoder and decoder devices,
to fix the following v4l2-compliance test failure:
test VIDIOC_TRY_FMT: OK
fail: v4l2-test-formats.cpp(818): fmt_raw.g_colorspace() != V4L2_COLORSPACE_SRGB
Also explicitly set transfer function, YCbCr encoding and quantization
range, as required by v4l2-compliance for the JPEG encoded side.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The resource is checked in probe function, so there is
no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The video viu driver is not a vital one for booting purposes.
Remove the unneeded 'default y' option.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The typical behavior is to add all controls, then at the end check if
hdl->error was set, and if so, v4l2_ctrl_handler_free is called and
the error is returned.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For some invalid frames,
especially multiple consecutive invalid frames,
they all can't be decoded,
then the firmware can send picture skipped event
to notify driver that some frames are invalid,
driver can return them with error flag.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
encoded, in previous, driver will return the output buffer immediately
after firmware return it
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY
To implement this, driver will keep the output buffer until it's
decoded, in previous, driver will return the output buffer immediately
after copying data to stream buffer.
After that, there is no need to make a workaround for poll function.
driver can use v4l2_m2m_fop_poll directly.
Also, driver don't need to keep a input threshold
as the buffer count is up to only 32.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m.
The build errors occur due to [in drivers/media/Makefile]:
obj-$(CONFIG_VIDEO_DEV) += radio/
so the (would be) builtin tea575x.o is not being built.
This is also due to drivers/media/radio/Kconfig declaring a bool
Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV),
so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers
that depend on RADIO_ADPATERS can be configured as builtin (=y) or
as loadable modules (=m).
Fix this by converting RADIO_ADAPTERS to a tristate symbol instead
of a bool symbol.
Fixes these build errors:
ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined!
Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com
Fixes: 9958d30f38 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Syzbot reported that -1 is used as array index. The problem was in
missing validation check.
hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.
hdw->workpoll initialization moved upper to prevent warning in
__flush_work.
Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com
Fixes: d855497edb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove a stray blank line between function definition and body.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The GStreamer v4l2videodec only ever calls S_FMT on the output side
and then expects G_FMT on the capture side to return a valid format.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.
The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.
[hverkuil: document the new precision field]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Clang static analysis reports this issue
ispcsiphy.c:63:14: warning: The left operand of '<<'
is a garbage value
reg |= mode << shift;
~~~~ ^
The iface switch-statement default case falls through
to ISP_INTERFACE_CCP2B_PHY1. Which is later checked
to set the mode. Since the default case is left out
of this check mode is never set. Instead of falling
through and assuming a ISP_INTERFACE_CCP2B_PHY1
iface, return.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable.
Fix this by changing clk_disable to clk_disable_unprepare.
Fixes: b4155d7d5b ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
We verified that "vpif_obj.sd[i]" is non-NULL on the previous line so
no need to check here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The "bdisp->clock" variable cannot be an error pointer here. No need to
check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The RDACM20 camera supports a single image format which is currently
listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on
the GMSL serial bus, the 2X8 variant does not apply.
Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16.
This fixes a runtime error which is now triggered as the MAX9286
deserializer implements .link_validate().
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add a check to make sure the input interface (CSI-2 or parallel) allow
for the requested input bus format. If not inform the user and error out
rather then try to continue with incorrect settings.
While at it add the missing define for RGB666 that is not yet supported
in the driver but we can preemptively check for it in this context
already.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The v4l2_m2m_dev structure documentation incorrectly references the
v4l2_m2m_unregister_media_controller() function when it actually means
v4l2_m2m_register_media_controller(). Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
smb_word_op() has a parameter data_format that
determines if the data is either a byte or
word. From inspection, smb_word_op() is only
used by the macros smb_wr16() and smb_rd16()
both pass in CMD_WORD_DATA. There is no use of
smb_word_op() that passes in CMD_BYTE_DATA.
So remove the byte handling.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdevice entity function was left unset, which produces a warning
when probing the device:
mxc-md bus@58000000📷 Entity type for entity rdacm20 19-0051 was
not initialized!
This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave
flags unset.
Fixes: 34009bffc1 ("media: i2c: Add RDACM20 driver")
Fixes: a59f853b3b ("media: i2c: Add driver for RDACM21 camera module")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 0a0e265515 ("media: atmel: atmel-isc: split driver into driver base and isc")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The pm_runtime_enable will decrease power disable depth.
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: f386509e49 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If probe fails then we need to call pm_runtime_disable() to balance
out the previous pm_runtime_enable() call.
Fixes: 9a761e4368 ("[media] exynos4-is: Add Exynos4x12 FIMC-IS driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
A dma_free_coherent() call is missing in the error handling path of the
probe, as already done in the remove function.
In fact, this call is included in aspeed_video_free_buf(). So use the
latter both in the error handling path of the probe and in the remove
function.
It is easier to see the relation with aspeed_video_alloc_buf() this way.
Fixes: d2b4387f3b ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This patch aims to add UVC_GUID_FORMAT_H265
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2.
They describe the same video encoding method.
So for handling their behavior is the same.
However, when external camera device describes this encoding method,
some use hevc, some use h265.
There is no uniform specification to describe this encoding method.
So if an external camera device use h265 to describe this encoding method,
driver will not recognize it.
Therefore, this patch is to enable driver to read HEVC/H265
and convert it to V4L2_PIX_FMT_HEVC.
Signed-off-by: James_Lin <Ping-lei.Lin@mediatek.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Replace manual decoding of psize in uvc_parse_streaming(), with the code
from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The case USB_SPEED_WIRELESS and the default one were doing the same.
Also, make always use of usb_endpoint_maxp_mult, as it should have a
sane value, even for LOW speed and WIRELESS.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Move all the life cycle of the name to add_mapping. This simplifies
the error handling inside uvc_ioctl_ctrl_map and solves a memory leak
when kemmdup fails.
Also make sure that for custom controls, the user provides a valid name.
Fixes: 07adedb5c606 ("media: uvcvideo: Use control names from framework")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
probe->dwMaxPayloadTransferSize is a 32bit value, but bandwidth is 16bit. This
may lead to a bit overflow.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The list iterator will point to a bogus position containing HEAD if
the list is empty or the element is not found in list. This case
should be checked before any use of the iterator, otherwise it will
lead to a invalid memory access. The missing check here is before
"pin = iterm->id;", just add check here to fix the security bug.
In addition, the list iterator value will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the element is not found in list, considering
the (mis)use here: "if (iterm == NULL".
Use a new value 'it' as the list iterator, while use the old value
'iterm' as a dedicated pointer to point to the found element, which
1. can fix this bug, due to 'iterm' is NULL only if it's not found.
2. do not need to change all the uses of 'iterm' after the loop.
3. can also limit the scope of the list iterator 'it' *only inside*
the traversal loop by simply declaring 'it' inside the loop in the
future, as usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Fixes: d5e90b7a6c ("[media] uvcvideo: Move to video_ioctl2")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As discussed with other developers, the linux-uvc-devel mailing list is
not very useful anymore, and it's better to send people to the general
linux-media mailing list.
Replace/remove the old mailing list address in uvcvideo.rst and
MAINTAINERS.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Do not handroll mdelay().
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-04-27
We've added 85 non-merge commits during the last 18 day(s) which contain
a total of 163 files changed, 4499 insertions(+), 1521 deletions(-).
The main changes are:
1) Teach libbpf to enhance BPF verifier log with human-readable and relevant
information about failed CO-RE relocations, from Andrii Nakryiko.
2) Add typed pointer support in BPF maps and enable it for unreferenced pointers
(via probe read) and referenced ones that can be passed to in-kernel helpers,
from Kumar Kartikeya Dwivedi.
3) Improve xsk to break NAPI loop when rx queue gets full to allow for forward
progress to consume descriptors, from Maciej Fijalkowski & Björn Töpel.
4) Fix a small RCU read-side race in BPF_PROG_RUN routines which dereferenced
the effective prog array before the rcu_read_lock, from Stanislav Fomichev.
5) Implement BPF atomic operations for RV64 JIT, and add libbpf parsing logic
for USDT arguments under riscv{32,64}, from Pu Lehui.
6) Implement libbpf parsing of USDT arguments under aarch64, from Alan Maguire.
7) Enable bpftool build for musl and remove nftw with FTW_ACTIONRETVAL usage
so it can be shipped under Alpine which is musl-based, from Dominique Martinet.
8) Clean up {sk,task,inode} local storage trace RCU handling as they do not
need to use call_rcu_tasks_trace() barrier, from KP Singh.
9) Improve libbpf API documentation and fix error return handling of various
API functions, from Grant Seltzer.
10) Enlarge offset check for bpf_skb_{load,store}_bytes() helpers given data
length of frags + frag_list may surpass old offset limit, from Liu Jian.
11) Various improvements to prog_tests in area of logging, test execution
and by-name subtest selection, from Mykola Lysenko.
12) Simplify map_btf_id generation for all map types by moving this process
to build time with help of resolve_btfids infra, from Menglong Dong.
13) Fix a libbpf bug in probing when falling back to legacy bpf_probe_read*()
helpers; the probing caused always to use old helpers, from Runqing Yang.
14) Add support for ARCompact and ARCv2 platforms for libbpf's PT_REGS
tracing macros, from Vladimir Isaev.
15) Cleanup BPF selftests to remove old & unneeded rlimit code given kernel
switched to memcg-based memory accouting a while ago, from Yafang Shao.
16) Refactor of BPF sysctl handlers to move them to BPF core, from Yan Zhu.
17) Fix BPF selftests in two occasions to work around regressions caused by latest
LLVM to unblock CI until their fixes are worked out, from Yonghong Song.
18) Misc cleanups all over the place, from various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Add libbpf's log fixup logic selftests
libbpf: Fix up verifier log for unguarded failed CO-RE relos
libbpf: Simplify bpf_core_parse_spec() signature
libbpf: Refactor CO-RE relo human description formatting routine
libbpf: Record subprog-resolved CO-RE relocations unconditionally
selftests/bpf: Add CO-RE relos and SEC("?...") to linked_funcs selftests
libbpf: Avoid joining .BTF.ext data with BPF programs by section name
libbpf: Fix logic for finding matching program for CO-RE relocation
libbpf: Drop unhelpful "program too large" guess
libbpf: Fix anonymous type check in CO-RE logic
bpf: Compute map_btf_id during build time
selftests/bpf: Add test for strict BTF type check
selftests/bpf: Add verifier tests for kptr
selftests/bpf: Add C tests for kptr
libbpf: Add kptr type tag macros to bpf_helpers.h
bpf: Make BTF type match stricter for release arguments
bpf: Teach verifier about kptr_get kfunc helpers
bpf: Wire up freeing of referenced kptr
bpf: Populate pairs of btf_id and destructor kfunc in btf
bpf: Adapt copy_map_value for multiple offset case
...
====================
Link: https://lore.kernel.org/r/20220427224758.20976-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to pass 'default n' in Kconfig, as by default the
CONFIG_VIDEO_IMX_MIPI_CSIS option is not selected.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit 5c0701a0e7 ("media: imx: csis: Store pads format separately")
broke initialization of the active format on the source pad, as it
forgot to update the .init_cfg() handler. Fix it.
Fixes: 5c0701a0e7 ("media: imx: csis: Store pads format separately")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mipi_csis_dump_regs() function accesses the interface registers
in order to printout their values for debug purposes.
As the function access the registers, it requires the interface to be
powered up. Currently this is only enforced in one of the function's
callers (mipi_csis_log_status)() but not when the function is called by
the debugfs attribute handler.
Make sure to access registers only if the interface is powered up and
remove the same check from the caller.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mipi_csis_device.powered flag only serves for the purpose of
not accessing registers in mipi_csis_log_status() when the interface
is not powered up.
Instead of manually tracking the power state, rely on
pm_runtime_get_if_in_use() to remove the 'powered' flag. Also remove
the locking in the function as runtime_pm() is refcounted and there's no
risk of the interface being powered down behind our backs.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Simplify the mipi_csis_s_stream() function.
This actually fixes a bug, as if calling the subdev's s_stream(1) fails,
mipi_csis_stop_stream() was not called.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The runtime PM resume handler is guaranteed to be called on a suspended
device, and the suspend handler on a resumed device. The implementation
can thus be simplified.
While at it, rename the mipi_csis_device state field to powered, as the
now state contains a single flag only.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Streaming is guaranteed to have been stopped by the time the device gets
runtime suspended, as pm_runtime_put() is called from .s_stream(0) only.
Drop the manual stop.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong