Commit Graph

21 Commits

Author SHA1 Message Date
Cliff Wickman 3a450de136 x86: UV: remove uv_flush_tlb_others() WARN_ON
In uv_flush_tlb_others() (arch/x86/kernel/tlb_uv.c),
the "WARN_ON(!in_atomic())" fails if CONFIG_PREEMPT is not enabled.

And CONFIG_PREEMPT is not enabled by default in the distribution that
most UV owners will use.

We could #ifdef CONFIG_PREEMPT the warning, but that is not good form.
And there seems to be no suitable fix to in_atomic() when CONFIG_PREMPT
is not on.

As Ingo commented:

  > and we have no proper primitive to test for atomicity. (mainly
  > because we dont know about atomicity on a non-preempt kernel)

So we drop the WARN_ON.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-08 11:17:15 +01:00
Ingo Molnar e641f5f525 x86, apic: remove duplicate asm/apic.h inclusions
Impact: cleanup

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar 7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar eca217b36e Merge branch 'x86/paravirt' into x86/apic
Conflicts:
	arch/x86/mach-voyager/voyager_smp.c
2009-02-09 12:16:59 +01:00
Cliff Wickman 2749ebe320 x86: UV fix uv_flush_send_and_wait()
Impact: fix possible tlb mis-flushing on UV

uv_flush_send_and_wait() should return a pointer if the broadcast
remote tlb shootdown requests fail. That causes the conventional IPI
method of shootdown to be used.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-31 14:23:37 +09:00
Ingo Molnar 1dcdd3d15e x86: remove mach_apic.h
Spread mach_apic.h definitions into genapic.h. (with some knock-on effects
on smp.h and apic.h.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:42 +01:00
Ingo Molnar 3ddeb51d9c Merge branch 'linus' into core/percpu
Conflicts:
	arch/x86/kernel/setup_percpu.c
2009-01-27 12:01:51 +01:00
Tejun Heo bdbcdd4888 x86: uv cleanup
Impact: cleanup

Make the following uv related cleanups.

* collect visible uv related definitions and interfaces into uv/uv.h
  and use it.  this cleans up the messy situation where on 64bit, uv
  is defined properly, on 32bit generic it's dummy and on the rest
  undefined.  after this clean up, uv is defined on 64 and dummy on
  32.

* update uv_flush_tlb_others() such that it takes cpumask of
  to-be-flushed cpus as argument, instead of that minus self, and
  returns yet-to-be-flushed cpumask, instead of modifying the passed
  in parameter.  this interface change will ease dummy implementation
  of uv_flush_tlb_others() and makes uv tlb flush related stuff
  defined in tlb_uv proper.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-21 17:26:06 +09:00
Cliff Wickman 18c07cf530 x86, UV: cpu_relax in uv_wait_completion
The function uv_wait_completion() spins on reads of a memory-mapped
register, waiting for completion of BAU hardware replies.

It should call "cpu_relax()" between those reads to improve performance
on hyperthreaded configurations.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-15 23:48:20 +01:00
Rusty Russell 4595f9620c x86: change flush_tlb_others to take a const struct cpumask
Impact: reduce stack usage, use new cpumask API.

This is made a little more tricky by uv_flush_tlb_others which
actually alters its argument, for an IPI to be sent to the remaining
cpus in the mask.

I solve this by allocating a cpumask_var_t for this case and falling back
to IPI should this fail.

To eliminate temporaries in the caller, all flush_tlb_others implementations
now do the this-cpu-elimination step themselves.

Note also the curious "cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask)"
which has been there since pre-git and yet f->flush_cpumask is always zero
at this point.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 19:13:06 +01:00
Cliff Wickman 46814dded1 x86, UV: remove erroneous BAU initialization
Impact: fix crash on x86/UV

UV is the SGI "UltraViolet" machine, which is x86_64 based.
BAU is the "Broadcast Assist Unit", used for TLB shootdown in UV.

This patch removes the allocation and initialization of an unused table.

This table is left over from a development test mode.  It is unused in
the present code.

And it was incorrectly initialized: 8 entries allocated but 17 initialized,
causing slab corruption.

This patch should go into 2.6.27 and 2.6.28 as well as the current tree.

Diffed against 2.6.28 (linux-next, 12/30/08)

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02 17:26:25 +01:00
Cliff Wickman a3d732f937 x86, UV: fix redundant creation of sgi_uv
Impact: fix double entry creation in /proc

There is a collision between two UV functions:
  both uv_ptc_init() and gru_proc_init() try to make /proc/sgi_uv

So move it's creation to a single place: uv_system_init()

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 11:38:50 +01:00
Jeremy Fitzhardinge aef8f5b8c2 x86/tlb_uv: remove strange mc146818rtc include
For some reason tlb_uv was including linux/mc146818rtc.h.  It really
just needs linux/seq_file.h

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citix.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-22 16:56:23 +02:00
Cliff Wickman 99dd871330 x86, SGI UV: hardcode the TLB flush interrupt system vector
The UV TLB shootdown mechanism needs a system interrupt vector.

Its vector had been hardcoded as 200, but needs to moved to the reserved
system vector range so that it does not collide with some device vector.

This is still temporary until dynamic system IRQ allocation is provided.
But it will be needed when real UV hardware becomes available and runs 2.6.27.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 12:36:03 +02:00
Cliff Wickman e7eb8726d0 x86, SGI UV: uv_ptc_proc_write fix
Someone could write 0 bytes to /proc/sgi_uv/ptc_statistics,
causing
  optstr[count - 1] = '\0';
to write to who-knows-where.

(Andi Kleen noticed this need from a patch I sent for
 similar code in the ia64 world (sn2_ptc_proc_write()).)

(count less than zero is not possible here, as count is unsigned)

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:31 +02:00
Cliff Wickman cef5327868 x86, SGI UV: TLB shootdown using broadcast assist unit, v6
v6: 6/19 close the security hole in uv_ptc_proc_write())

  > Found a potential security hole while doing that:
  > static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user,
  >                              size_t count, loff_t *data)
  >     if (copy_from_user(optstr, user, count))
  >             return -EFAULT;
  >
  > is count guaranteed to never be larger than 64?

is fixed below.

It adds tlb_uv.o to the Makefile.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: mingo@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:30 +02:00
Ingo Molnar d400524aff SGI UV: TLB shootdown using broadcast assist unit, fix
fix:

arch/x86/kernel/tlb_uv.c: In function ‘uv_table_bases_init':
arch/x86/kernel/tlb_uv.c:612: error: ‘bau_tabsp' undeclared (first use in this function)
arch/x86/kernel/tlb_uv.c:612: error: (Each undeclared identifier is reported only once
arch/x86/kernel/tlb_uv.c:612: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:27 +02:00
Ingo Molnar b4c286e6af SGI UV: clean up arch/x86/kernel/tlb_uv.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:26 +02:00
Ingo Molnar dc163a41ff SGI UV: TLB shootdown using broadcast assist unit
TLB shootdown for SGI UV.

v5: 6/12 corrections/improvements per Ingo's second review

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:25 +02:00
Cliff Wickman b194b12050 SGI UV: TLB shootdown using broadcast assist unit, cleanups
TLB shootdown for SGI UV.

v1: 6/2 original
v2: 6/3 corrections/improvements per Ingo's review
v3: 6/4 split atomic operations off to a separate patch (Jeremy's review)
v4: 6/12 include <mach_apic.h> rather than <asm/mach-bigsmp/mach_apic.h>
         (fixes a !SMP build problem that Ingo found)
         fix the index on uv_table_bases[blade]

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:24 +02:00
Cliff Wickman 1812924bb1 x86, SGI UV: TLB shootdown using broadcast assist unit
TLB shootdown for SGI UV.

Depends on patch (in tip/x86/irq):
   x86-update-macros-used-by-uv-platform.patch   Jack Steiner May 29

This patch provides the ability to flush TLB's in cpu's that are not on
the local node.  The hardware mechanism for distributing the flush
messages is the UV's "broadcast assist unit".

The hook to intercept TLB shootdown requests is a 2-line change to
native_flush_tlb_others() (arch/x86/kernel/tlb_64.c).

This code has been tested on a hardware simulator. The real hardware
is not yet available.

The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics.
The use of /sys was considered, but would have required the use of
many /sys files.  The debugfs was also considered, but these statistics
should be available on an ongoing basis, not just for debugging.

Issues to be fixed later:
- The IRQ for the messaging interrupt is currently hardcoded as 200
  (see UV_BAU_MESSAGE).  It should be dynamically assigned in the future.
- The use of appropriate udelay()'s is untested, as they are a problem
  in the simulator.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08 12:23:22 +02:00