Commit Graph

77 Commits

Author SHA1 Message Date
Joe Perches a8eceea84a inet: Use fallthrough;
Convert the various uses of fallthrough comments to fallthrough;

Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/

And by hand:

net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block
that causes gcc to emit a warning if converted in-place.

So move the new fallthrough; inside the containing #ifdef/#endif too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12 15:55:00 -07:00
Florian Westphal 4f518e802c xfrm: remove type and offload_type map from xfrm_state_afinfo
Only a handful of xfrm_types exist, no need to have 512 pointers for them.

Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms.

Also, the unregister function doesn't need to return an error, no single
caller does anything useful with it.

Just place a WARN_ON() where needed instead.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06 08:34:50 +02:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
Maciej Żenczykowski 1042caa79e net-ipv4: remove 2 always zero parameters from ipv4_redirect()
(the parameters in question are mark and flow_flags)

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 20:30:55 -07:00
Maciej Żenczykowski d888f39666 net-ipv4: remove 2 always zero parameters from ipv4_update_pmtu()
(the parameters in question are mark and flow_flags)

Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-26 20:30:55 -07:00
Gilad Ben-Yossef 068c2e7035 net: use -ENOSPC for transient busy indication
Replace -EBUSY with -ENOSPC when handling transient busy
indication in the absence of backlog.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03 22:11:17 +08:00
David S. Miller 93bbbfbb4a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2017-06-23

1) Use memdup_user to spmlify xfrm_user_policy.
   From Geliang Tang.

2) Make xfrm_dev_register static to silence a sparse warning.
   From Wei Yongjun.

3) Use crypto_memneq to check the ICV in the AH protocol.
   From Sabrina Dubroca.

4) Remove some unused variables in esp6.
   From Stephen Hemminger.

5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port.
   From Antony Antony.

6) Include the UDP encapsulation port to km_migrate announcements.
   From Antony Antony.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-23 14:17:31 -04:00
Jason A. Donenfeld 3f29770723 ipsec: check return value of skb_to_sgvec always
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 23:01:47 -04:00
Sabrina Dubroca 67df58a3e5 ah: use crypto_memneq to check the ICV
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-19 14:30:50 +02:00
Gilad Ben-Yossef ebd89a2d06 IPsec: do not ignore crypto err in ah4 input
ah4 input processing uses the asynchronous hash crypto API which
supplies an error code as part of the operation completion but
the error code was being ignored.

Treat a crypto API error indication as a verification failure.

While a crypto API reported error would almost certainly result
in a memcpy of the digest failing anyway and thus the security
risk seems minor, performing a memory compare on what might be
uninitialized memory is wrong.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-16 12:57:48 +01:00
David S. Miller 94c10f0ea3 ah4: Fix error return in ah_input().
Noticed by Herbert Xu.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25 13:38:50 -07:00
Herbert Xu 689f1c9de2 ipsec: Remove obsolete MAX_AH_AUTH_LEN
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel
I thought that this limit was rather arbitrary and we should
just get rid of it.

In fact it seems that we've already done all the work needed
to remove it apart from actually removing it.  This limit was
there in order to limit stack usage.  Since we've already
switched over to allocating scratch space using kmalloc, there
is no longer any need to limit the authentication length.

This patch kills all references to it, including the BUG_ONs
that led me here.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-18 10:54:36 +02:00
Steffen Klassert e5b56454e0 ah4: Use the IPsec protocol multiplexer API
Switch ah4 to use the new IPsec protocol multiplexer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25 07:04:17 +01:00
Fan Du d8b2a8600b {IPv4,xfrm} Add ESN support for AH ingress part
This patch add esn support for AH input stage by attaching upper 32bits
sequence number right after packet payload as specified by RFC 4302.

Then the ICV value will guard upper 32bits sequence number as well when
packet getting in.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12 07:02:10 +01:00
Fan Du d4d573d033 {IPv4,xfrm} Add ESN support for AH egress part
This patch add esn support for AH output stage by attaching upper 32bits
sequence number right after packet payload as specified by RFC 4302.

Then the ICV value will guard upper 32bits sequence number as well when
packet going out.

Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-12 07:02:10 +01:00
Timo Teräs 387aa65a89 ipv4: properly refresh rtable entries on pmtu/redirect events
This reverts commit 05ab86c5 (xfrm4: Invalidate all ipv4 routes on
IPsec pmtu events). Flushing all cached entries is not needed.

Instead, invalidate only the related next hop dsts to recheck for
the added next hop exception where needed. This also fixes a subtle
race due to bumping generation id's before updating the pmtu.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03 00:07:42 -07:00
Pravin B Shelar 14bbd6a565 net: Add skb_unclone() helper function.
This function will be used in next GRE_GSO patch. This patch does
not change any functionality.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
2013-02-15 15:10:37 -05:00
Steffen Klassert 05ab86c556 xfrm4: Invalidate all ipv4 routes on IPsec pmtu events
On IPsec pmtu events we can't access the transport headers of
the original packet, so we can't find the socket that sent
the packet. The only chance to notify the socket about the
pmtu change is to force a relookup for all routes. This
patch implenents this for the IPsec protocols.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-21 12:43:54 +01:00
Li RongQing 7143dfac69 ah4/esp4: set transport header correctly for IPsec tunnel mode.
IPsec tunnel does not set ECN field to CE in inner header when
the ECN field in the outer header is CE, and the ECN field in
the inner header is ECT(0) or ECT(1).

The cause is ipip_hdr() does not return the correct address of
inner header since skb->transport-header is not the inner header
after esp_input_done2(), or ah_input().

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-08 12:41:30 +01:00
David S. Miller 55be7a9c60 ipv4: Add redirect support to all protocol icmp error handlers.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11 21:27:49 -07:00
David S. Miller 3639339553 ipv4: Handle PMTU in all ICMP error handlers.
With ip_rt_frag_needed() removed, we have to explicitly update PMTU
information in every ICMP error handler.

Create two helper functions to facilitate this.

1) ipv4_sk_update_pmtu()

   This updates the PMTU when we have a socket context to
   work with.

2) ipv4_update_pmtu()

   Raw version, used when no socket context is available.  For this
   interface, we essentially just pass in explicit arguments for
   the flow identity information we would have extracted from the
   socket.

   And you'll notice that ipv4_sk_update_pmtu() is simply implemented
   in terms of ipv4_update_pmtu()

Note that __ip_route_output_key() is used, rather than something like
ip_route_output_flow() or ip_route_output_key().  This is because we
absolutely do not want to end up with a route that does IPSEC
encapsulation and the like.  Instead, we only want the route that
would get us to the node described by the outermost IP header.

Reported-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14 22:22:07 -07:00
Joe Perches 91df42bedc net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debug
Use the current debugging style and enable dynamic_debug.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16 01:01:03 -04:00
Daniel Baluta 5e73ea1a31 ipv4: fix checkpatch errors
Fix checkpatch errors of the following type:
	* ERROR: "foo * bar" should be "foo *bar"
	* ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 12:37:19 -04:00
Joe Perches afd465030a net: ipv4: Standardize prefixes for message logging
Add #define pr_fmt(fmt) as appropriate.

Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files.
Standardize on "UDPLite: " for appropriate uses.
Some prefixes were previously "UDPLITE: " and "UDP-Lite: ".

Add KBUILD_MODNAME ": " to icmp and gre.
Remove embedded prefixes as appropriate.

Add missing "\n" to pr_info in gre.c.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 17:05:21 -07:00
Joe Perches 058bd4d2a4 net: Convert printks to pr_<level>
Use a more current kernel messaging style.

Convert a printk block to print_hex_dump.
Coalesce formats, align arguments.
Use %s, __func__ instead of embedding function names.

Some messages that were prefixed with <foo>_close are
now prefixed with <foo>_fini.  Some ah4 and esp messages
are now not prefixed with "ip ".

The intent of this patch is to later add something like
  #define pr_fmt(fmt) "IPv4: " fmt.
to standardize the output messages.

Text size is trivially reduced. (x86-32 allyesconfig)

$ size net/ipv4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 887888	  31558	 249696	1169142	 11d6f6	net/ipv4/built-in.o.new
 887934	  31558	 249800	1169292	 11d78c	net/ipv4/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11 23:42:51 -07:00
Nick Bowler 4b90a603a1 ah: Don't return NET_XMIT_DROP on input.
When the ahash driver returns -EBUSY, AH4/6 input functions return
NET_XMIT_DROP, presumably copied from the output code path.  But
returning transmit codes on input doesn't make a lot of sense.
Since NET_XMIT_DROP is a positive int, this gets interpreted as
the next header type (i.e., success).  As that can only end badly,
remove the check.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-12 18:13:32 -05:00
Nick Bowler b7ea81a58a ah: Read nexthdr value before overwriting it in ahash input callback.
The AH4/6 ahash input callbacks read out the nexthdr field from the AH
header *after* they overwrite that header.  This is obviously not going
to end well.  Fix it up.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09 15:55:53 -05:00
Nick Bowler 069294e813 ah: Correctly pass error codes in ahash output callback.
The AH4/6 ahash output callbacks pass nexthdr to xfrm_output_resume
instead of the error code.  This appears to be a copy+paste error from
the input case, where nexthdr is expected.  This causes the driver to
continuously add AH headers to the datagram until either an allocation
fails and the packet is dropped or the ahash driver hits a synchronous
fallback and the resulting monstrosity is transmitted.

Correct this issue by simply passing the error code unadulterated.

Signed-off-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-09 15:55:53 -05:00
Eric Dumazet b71d1d426d inet: constify ip headers and in6_addr
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 11:04:14 -07:00
Steffen Klassert 1ce3644ade xfrm: Use separate low and high order bits of the sequence numbers in xfrm_skb_cb
To support IPsec extended sequence numbers, we split the
output sequence numbers of xfrm_skb_cb in low and high order 32 bits
and we add the high order 32 bits to the input sequence numbers.
All users are updated accordingly.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13 20:22:28 -07:00
Nicolas Dichtel fa9921e46f ipsec: allow to align IPv4 AH on 32 bits
The Linux IPv4 AH stack aligns the AH header on a 64 bit boundary
(like in IPv6). This is not RFC compliant (see RFC4302, Section
3.3.3.2.1), it should be aligned on 32 bits.

For most of the authentication algorithms, the ICV size is 96 bits.
The AH header alignment on 32 or 64 bits gives the same results.

However for SHA-256-128 for instance, the wrong 64 bit alignment results
in adding useless padding in IPv4 AH, which is forbidden by the RFC.

To avoid breaking backward compatibility, we use a new flag
(XFRM_STATE_ALIGN4) do change original behavior.

Initial patch from Dang Hongwu <hongwu.dang@6wind.com> and
Christophe Gouault <christophe.gouault@6wind.com>.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-08 14:00:40 -08:00
Dang Hongwu 4b0ef1f223 ah: reload pointers to skb data after calling skb_cow_data()
skb_cow_data() may allocate a new data buffer, so pointers on
skb should be set after this function.

Bug was introduced by commit dff3bb06 ("ah4: convert to ahash")
and 8631e9bd ("ah6: convert to ahash").

Signed-off-by: Wang Xuefu <xuefu.wang@6wind.com>
Acked-by: Krzysztof Witek <krzysztof.witek@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-11 14:03:10 -08:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jamal Hadi Salim bd55775c8d xfrm: SA lookups signature with mark
pass mark to all SA lookups to prepare them for when we add code
to have them search.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22 16:20:22 -08:00
Martin Willi 8f8a088c21 xfrm: Use the user specified truncation length in ESP and AH
Instead of using the hardcoded truncation for authentication
algorithms, use the truncation length specified on xfrm_state.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:41 -08:00
Steffen Klassert dff3bb0626 ah4: convert to ahash
This patch converts ah4 to the new ahash interface.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-18 21:31:59 -07:00
Alexey Dobriyan 32613090a9 net: constify struct net_protocol
Remove long removed "inet_protocol_base" declaration.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:01 -07:00
Alexey Dobriyan 4fb236bac9 netns xfrm: AH/ESP in netns!
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 17:59:27 -08:00
Alexey Dobriyan 221df1ed33 netns xfrm: state lookup in netns
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 17:30:50 -08:00
Alexey Dobriyan 6daad37230 ah4/ah6: remove useless NULL assignments
struct will be kfreed in a moment, so...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-25 01:05:09 -08:00
Jianjun Kong d9319100c1 net: clean up net/ipv4/ah4.c esp4.c fib_semantics.c inet_connection_sock.c inetpeer.c ip_output.c
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 00:23:42 -08:00
Herbert Xu b318e0e4ef [IPSEC]: Fix bogus usage of u64 on input sequence number
Al Viro spotted a bogus use of u64 on the input sequence number which
is big-endian.  This patch fixes it by giving the input sequence number
its own member in the xfrm_skb_cb structure.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-12 22:50:35 -08:00
Eric Dumazet 533cb5b0a6 [XFRM]: constify 'struct xfrm_type'
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:20 -08:00
Herbert Xu 9dd3245a2a [IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_input
Let's nip the code duplication in the bud :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:10 -08:00
Paul Moore afeb14b490 [XFRM]: RFC4303 compliant auditing
This patch adds a number of new IPsec audit events to meet the auditing
requirements of RFC4303.  This includes audit hooks for the following events:

 * Could not find a valid SA [sections 2.1, 3.4.2]
   . xfrm_audit_state_notfound()
   . xfrm_audit_state_notfound_simple()

 * Sequence number overflow [section 3.3.3]
   . xfrm_audit_state_replay_overflow()

 * Replayed packet [section 3.4.3]
   . xfrm_audit_state_replay()

 * Integrity check failure [sections 3.4.4.1, 3.4.4.2]
   . xfrm_audit_state_icvfail()

While RFC4304 deals only with ESP most of the changes in this patch apply to
IPsec in general, i.e. both AH and ESP.  The one case, integrity check
failure, where ESP specific code had to be modified the same was done to the
AH code for the sake of consistency.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:00:01 -08:00
Herbert Xu 0ebea8ef35 [IPSEC]: Move state lock into x->type->input
This patch releases the lock on the state before calling
x->type->input.  It also adds the lock to the spots where they're
currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:52 -08:00
Herbert Xu 668dc8af31 [IPSEC]: Move integrity stat collection into xfrm_input
Similar to the moving out of the replay processing on the output, this
patch moves the integrity stat collectin from x->type->input into
xfrm_input.

This would eventually allow transforms such as AH/ESP to be lockless.

The error value EBADMSG (currently unused in the crypto layer) is used
to indicate a failed integrity check.  In future this error can be
directly returned by the crypto layer once we switch to aead
algorithms.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:51 -08:00
Adrian Bunk 87ae9afdca cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Herbert Xu 631a6698d0 [IPSEC]: Move IP protocol setting from transforms into xfrm4_input.c
This patch makes the IPv4 x->type->input functions return the next protocol
instead of setting it directly.  This is identical to how we do things in
IPv6 and will help us merge common code on the input path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:56 -07:00
Herbert Xu ceb1eec829 [IPSEC]: Move IP length/checksum setting out of transforms
This patch moves the setting of the IP length and checksum fields out of
the transforms and into the xfrmX_output functions.  This would help future
efforts in merging the transforms themselves.

It also adds an optimisation to ipcomp due to the fact that the transport
offset is guaranteed to be zero.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:56 -07:00