Commit ac4e97abce ("scatterlist: sg_set_buf() argument must be in linear
mapping") checks that both the signature and the digest reside in the
linear mapping area.
However, more recently commit ba14a194a4 ("fork: Add generic vmalloced
stack support") made it possible to move the stack in the vmalloc area,
which is not contiguous, and thus not suitable for sg_set_buf() which needs
adjacent pages.
Always make a copy of the signature and digest in the same buffer used to
store the key and its parameters, and pass them to sg_init_one(). Prefer it
to conditionally doing the copy if necessary, to keep the code simple. The
buffer allocated with kmalloc() is in the linear mapping area.
Cc: stable@vger.kernel.org # 4.9.x
Fixes: ba14a194a4 ("fork: Add generic vmalloced stack support")
Link: https://lore.kernel.org/linux-integrity/Y4pIpxbjBdajymBJ@sol.localdomain/
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without Makefile.modbuiltin
or tristate.conf"). Nick has been working on this *for years* and
AFAICT I was the only one to suggest two alternatives to this approach
for tooling. The complexity in one of my suggested approaches lies in
that we'd need a possible-obj-m and a could-be-module which would check
if the object being built is part of any kconfig build which could ever
lead to it being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've
suggested would be to have a tristate in kconfig imply the same new
-DPOSSIBLE_MODULE as well but that means getting kconfig symbol names
mapping to modules always, and I don't think that's the case today. I am
not aware of Nick or anyone exploring either of these options. Quite
recently Josh Poimboeuf has pointed out that live patching, kprobes and
BPF would benefit from resolving some part of the disambiguation as
well but for other reasons. The function granularity KASLR (fgkaslr)
patches were mentioned but Joe Lawrence has clarified this effort has
been dropped with no clear solution in sight [1].
In the meantime removing module license tags from code which could never
be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up,
and so you'll see quite a bit of Nick's patches in other pull
requests for this merge window. I just picked up the stragglers after
rc3. LWN has good coverage on the motivation behind this work [2] and
the typical cross-tree issues he ran into along the way. The only
concrete blocker issue he ran into was that we should not remove the
MODULE_LICENSE() tags from files which have no SPDX tags yet, even if
they can never be modules. Nick ended up giving up on his efforts due
to having to do this vetting and backlash he ran into from folks who
really did *not understand* the core of the issue nor were providing
any alternative / guidance. I've gone through his changes and dropped
the patches which dropped the module license tags where an SPDX
license tag was missing, it only consisted of 11 drivers. To see
if a pull request deals with a file which lacks SPDX tags you
can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above,
but that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but
it demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees,
and I just picked up the slack after rc3 for the last kernel was out.
Those changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on
a systems with over 400 CPUs when KASAN was enabled due to running
out of virtual memory space. Although the functional change only
consists of 3 lines in the patch "module: avoid allocation if module is
already present and ready", proving that this was the best we can
do on the modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been
in linux-next since around rc3 of the last kernel, the actual final
fix for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported
with larger number of CPUs. Userspace is not yet fixed as it is taking
a bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge them,
but I'm currently inclined to just see if userspace can fix this
instead.
[0] https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/
[1] https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com
[2] https://lwn.net/Articles/927569/
[3] https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEENnNq2KuOejlQLZofziMdCjCSiKcFAmRG4m0SHG1jZ3JvZkBr
ZXJuZWwub3JnAAoJEM4jHQowkoinQ2oP/0xlvKwJg6Ey8fHZF0qv8VOskE80zoLF
hMazU3xfqLA+1TQvouW1YBxt3jwS3t1Ehs+NrV+nY9Yzcm0MzRX/n3fASJVe7nRr
oqWWQU+voYl5Pw1xsfdp6C8IXpBQorpYby3Vp0MAMoZyl2W2YrNo36NV488wM9KC
jD4HF5Z6xpnPSZTRR7AgW9mo7FdAtxPeKJ76Bch7lH8U6omT7n36WqTw+5B1eAYU
YTOvrjRs294oqmWE+LeebyiOOXhH/yEYx4JNQgCwPdxwnRiGJWKsk5va0hRApqF/
WW8dIqdEnjsa84lCuxnmWgbcPK8cgmlO0rT0DyneACCldNlldCW1LJ0HOwLk9pea
p3JFAsBL7TKue4Tos6I7/4rx1ufyBGGIigqw9/VX5g0Iif+3BhWnqKRfz+p9wiMa
Fl7cU6u7yC68CHu1HBSisK16cYMCPeOnTSd89upHj8JU/t74O6k/ARvjrQ9qmNUt
c5U+OY+WpNJ1nXQydhY/yIDhFdYg8SSpNuIO90r4L8/8jRQYXNG80FDd1UtvVDuy
eq0r2yZ8C0XHSlOT9QHaua/tWV/aaKtyC/c0hDRrigfUrq8UOlGujMXbUnrmrWJI
tLJLAc7ePWAAoZXGSHrt0U27l029GzLwRdKqJ6kkDANVnTeOdV+mmBg9zGh3/Mp6
agiwdHUMVN7X
=56WK
-----END PGP SIGNATURE-----
Merge tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0]
Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
Add machine keyring CA restriction options to control the type of
keys that may be added to it. The motivation is separation of
certificate signing from code signing keys. Subsquent work will
limit certificates being loaded into the IMA keyring to code
signing keys used for signature verification.
When no restrictions are selected, all Machine Owner Keys (MOK) are added
to the machine keyring. When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is
selected, the CA bit must be true. Also the key usage must contain
keyCertSign, any other usage field may be set as well.
When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must
be true. Also the key usage must contain keyCertSign and the
digitialSignature usage may not be set.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a new link restriction. Restrict the addition of keys in a keyring
based on the key to be added being a CA.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Parse the X.509 Key Usage. The key usage extension defines the purpose of
the key contained in the certificate.
id-ce-keyUsage OBJECT IDENTIFIER ::= { id-ce 15 }
KeyUsage ::= BIT STRING {
digitalSignature (0),
contentCommitment (1),
keyEncipherment (2),
dataEncipherment (3),
keyAgreement (4),
keyCertSign (5),
cRLSign (6),
encipherOnly (7),
decipherOnly (8) }
If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Parse the X.509 Basic Constraints. The basic constraints extension
identifies whether the subject of the certificate is a CA.
BasicConstraints ::= SEQUENCE {
cA BOOLEAN DEFAULT FALSE,
pathLenConstraint INTEGER (0..MAX) OPTIONAL }
If the CA is true, store it in the public_key. This will be used
in a follow on patch that requires knowing if the public key is a CA.
Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
These particular errors can be encountered while trying to kexec when
secureboot lockdown is in place. Without this change, even with a
signed debug build, one still needs to reboot the machine to add the
appropriate dyndbg parameters (since lockdown blocks debugfs).
Accordingly, upgrade all pr_debug() before fatal error into pr_warn().
Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://lore.kernel.org/r/20230220171254.592347-3-rharwood@redhat.com/ # v2
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmP1VIYACgkQMUZtbf5S
IrvsChAApz0rNL/sPKxXTEfxZ1tN7D3sYxYKQPomxvl5BV+MvicrLddJy3KmzEFK
nnJNO3nuRNuH422JQ/ylZ4mGX1opa6+5QJb0UINImXUI7Fm8HHBIuPGkv7d5CheZ
7JexFqjPJXUy9nPyh1Rra+IA9AcRd2U7jeGEZR38wb99bHJQj5Bzdk20WArEB0el
n44aqg49LXH71bSeXRz77x5SjkwVtYiccQxLcnmTbjLU2xVraLvI2J+wAhHnVXWW
9lrU1+V4Ex2Xcd1xR0L0cHeK+meP1TrPRAeF+JDpVI3a/zJiE7cZjfHdG/jH5xWl
leZJqghVozrZQNtewWWO7XhUFhMDgFu3W/1vNLjSHPZEqaz1JpM67J1+ql6s63l4
LMWoXbcYZz+SL9ZRCoPkbGue/5fKSHv8/Jl9Sh58+eTS+c/zgN8uFGRNFXLX1+EP
n8uvt985PxMd6x1+dHumhOUzxnY4Sfi1vjitSunTsNFQ3Cmp4SO0IfBVJWfLUCuC
xz5hbJGJJbSpvUsO+HWyCg83E5OWghRE/Onpt2jsQSZCrO9HDg4FRTEf3WAMgaqc
edb5KfbRZPTJQM08gWdluXzSk1nw3FNP2tXW4XlgUrEbjb+fOk0V9dQg2gyYTxQ1
Nhvn8ZQPi6/GMMELHAIPGmmW1allyOGiAzGlQsv8EmL+OFM6WDI=
=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
When support for ECDSA keys was added, constraints for data & signature
sizes were never updated. This makes it impossible to use such keys via
keyctl API from userspace.
Update constraint on max_data_size to 64 bytes in order to support
SHA512-based signatures. Also update the signature length constraints
per ECDSA signature encoding described in RFC 5480.
Fixes: 299f561a66 ("x509: Add support for parsing x509 certs with ECDSA keys")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The selftest code is built into the x509_key_parser module, and depends
on the pkcs7_message_parser module, which in turn has a dependency on
the key parser, creating a dependency loop and a resulting link
failure when the pkcs7 code is a loadable module:
ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest':
crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message'
ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data'
ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify'
ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust'
ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message'
Avoid this by only allowing the selftest to be enabled when either
both parts are loadable modules, or both are built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
load_keys_from_buffer() in net/wireless/reg.c duplicates
x509_load_certificate_list() in crypto/asymmetric_keys/x509_loader.c
for no apparent reason.
Deduplicate it. No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/e7280be84acda02634bc7cb52c97656182b9c700.1673197326.git.lukas@wunner.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The signature verification of SM2 needs to add the Za value and
recalculate sig->digest, which requires the detection of the pkey_algo
in public_key_verify_signature(). As Eric Biggers said, the pkey_algo
field in sig is attacker-controlled and should be use pkey->pkey_algo
instead of sig->pkey_algo, and secondly, if sig->pkey_algo is NULL, it
will also cause signature verification failure.
The software_key_determine_akcipher() already forces the algorithms
are matched, so the SM3 algorithm is enforced in the SM2 signature,
although this has been checked, we still avoid using any algorithm
information in the signature as input.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Allow using EC-RDSA/streebog in pkcs7 certificates in a similar way
to how it's done in the x509 parser.
This is needed e.g. for loading kernel modules signed with EC-RDSA.
Signed-off-by: Elvira Khabirova <e.khabirova@omp.ru>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Support parsing the message signature of the SM2 and SM3 algorithm
combination. This group of algorithms has been well supported. One
of the main users is module signature verification.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The SM2-with-SM3 certificate generated by latest openssl no longer
reuses the OID_id_ecPublicKey, but directly uses OID_sm2. This patch
supports this type of x509 certificate parsing.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add some selftests for signature checking when FIPS mode is enabled. These
need to be done before we start actually using the signature checking for
things and must panic the kernel upon failure.
Note that the tests must not check the blacklist lest this provide a way to
prevent a kernel from booting by installing a hash of a test key in the
appropriate UEFI table.
Reported-by: Simo Sorce <simo@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://lore.kernel.org/r/165515742832.1554877.2073456606206090838.stgit@warthog.procyon.org.uk/
Move load_certificate_list(), which loads a series of binary X.509
certificates from a blob and inserts them as keys into a keyring, to be
with the asymmetric keys code that it drives.
This makes it easier to add FIPS selftest code in which we need to load up
a private keyring for the tests to use.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://lore.kernel.org/r/165515742145.1554877.13488098107542537203.stgit@warthog.procyon.org.uk/
Factor out the blacklist hash creation with the get_raw_hash() helper.
This also centralize the "tbs" and "bin" prefixes and make them private,
which help to manage them consistently.
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210712170313.884724-5-mic@digikod.net
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
It is insecure to allow arbitrary hash algorithms and signature
encodings to be used with arbitrary signature algorithms. Notably,
ECDSA, ECRDSA, and SM2 all sign/verify raw hash values and don't
disambiguate between different hash algorithms like RSA PKCS#1 v1.5
padding does. Therefore, they need to be restricted to certain sets of
hash algorithms (ideally just one, but in practice small sets are used).
Additionally, the encoding is an integral part of modern signature
algorithms, and is not supposed to vary.
Therefore, tighten the checks of hash_algo and encoding done by
software_key_determine_akcipher().
Also rearrange the parameters to software_key_determine_akcipher() to
put the public_key first, as this is the most important parameter and it
often determines everything else.
Fixes: 299f561a66 ("x509: Add support for parsing x509 certs with ECDSA keys")
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Fixes: 0d7a78643f ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Cc: stable@vger.kernel.org
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Most callers of public_key_verify_signature(), including most indirect
callers via verify_signature() as well as pkcs7_verify_sig_chain(),
don't check that public_key_signature::pkey_algo matches
public_key::pkey_algo. These should always match. However, a malicious
signature could intentionally declare an unintended algorithm. It is
essential that such signatures be rejected outright, or that the
algorithm of the *key* be used -- not the algorithm of the signature as
that would allow attackers to choose the algorithm used.
Currently, public_key_verify_signature() correctly uses the key's
algorithm when deciding which akcipher to allocate. That's good.
However, it uses the signature's algorithm when deciding whether to do
the first step of SM2, which is incorrect. Also, v4.19 and older
kernels used the signature's algorithm for the entire process.
Prevent such errors by making public_key_verify_signature() enforce that
the signature's algorithm (if given) matches the key's algorithm.
Also remove two checks of this done by callers, which are now redundant.
Cc: stable@vger.kernel.org
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
asym_tpm keys are tied to TPM v1.2, which uses outdated crypto and has
been deprecated in favor of TPM v2.0 for over 7 years. A very quick
look at this code also immediately found some memory safety bugs
(https://lore.kernel.org/r/20220113235440.90439-2-ebiggers@kernel.org).
Note that this code is reachable by unprivileged users.
According to Jarkko (one of the keyrings subsystem maintainers), this
code has no practical use cases, and he isn't willing to maintain it
(https://lore.kernel.org/r/YfFZPbKkgYJGWu1Q@iki.fi).
Therefore, let's remove it.
Note that this feature didn't have any documentation or tests, so we
don't need to worry about removing those.
Cc: David Howells <dhowells@redhat.com>
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The X.509 parser always sets cert->sig->pkey_algo and
cert->sig->hash_algo on success, since x509_note_sig_algo() is a
mandatory action in the X.509 ASN.1 grammar, and it returns an error if
the signature's algorithm is unknown. Thus, remove the dead code which
handled these fields being NULL.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The X.509 parser always sets cert->pub->pkey_algo on success, since
x509_extract_key_data() is a mandatory action in the X.509 ASN.1
grammar, and it returns an error if the algorithm is unknown. Thus,
remove the dead code which handled this field being NULL. This results
in the ->unsupported_key flag never being set, so remove that too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove unused fields from struct x509_parse_context.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
An X.509 certificate has two, potentially different public key
algorithms: the one used by the certificate's key, and the one that was
used to sign the certificate. Some of the naming made it unclear which
algorithm was meant. Rename things appropriately:
- x509_note_pkey_algo() => x509_note_sig_algo()
- algo_oid => sig_algo
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
For spdx
/* */ for *.h, // for *.c
Space before spdx tag
Replacements
paramenters to parameters
aymmetric to asymmetric
sigature to signature
boudary to boundary
compliled to compiled
eninges to engines
explicity to explicitly
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are non-root X.509 v3 certificates in use out there that contain
no Authority Key Identifier extension (RFC5280 section 4.2.1.1). For
trust verification purposes the kernel asymmetric key type keeps two
struct asymmetric_key_id instances that the key can be looked up by,
and another two to look up the key's issuer. The x509 public key type
and the PKCS7 type generate them from the SKID and AKID extensions in
the certificate. In effect current code has no way to look up the
issuer certificate for verification without the AKID.
To remedy this, add a third asymmetric_key_id blob to the arrays in
both asymmetric_key_id's (for certficate subject) and in the
public_keys_signature's auth_ids (for issuer lookup), using just raw
subject and issuer DNs from the certificate. Adapt
asymmetric_key_ids() and its callers to use the third ID for lookups
when none of the other two are available. Attempt to keep the logic
intact when they are, to minimise behaviour changes. Adapt the
restrict functions' NULL-checks to include that ID too. Do not modify
the lookup logic in pkcs7_verify.c, the AKID extensions are still
required there.
Internally use a new "dn:" prefix to the search specifier string
generated for the key lookup in find_asymmetric_key(). This tells
asymmetric_key_match_preparse to only match the data against the raw
DN in the third ID and shouldn't conflict with search specifiers
already in use.
In effect implement what (2) in the struct asymmetric_key_id comment
(include/keys/asymmetric-type.h) is probably talking about already, so
do not modify that comment. It is also how "openssl verify" looks up
issuer certificates without the AKID available. Lookups by the raw
DN are unambiguous only provided that the CAs respect the condition in
RFC5280 4.2.1.1 that the AKID may only be omitted if the CA uses
a single signing key.
The following is an example of two things that this change enables.
A self-signed ceritficate is generated following the example from
https://letsencrypt.org/docs/certificates-for-localhost/, and can be
looked up by an identifier and verified against itself by linking to a
restricted keyring -- both things not possible before due to the missing
AKID extension:
$ openssl req -x509 -out localhost.crt -outform DER -keyout localhost.key \
-newkey rsa:2048 -nodes -sha256 \
-subj '/CN=localhost' -extensions EXT -config <( \
echo -e "[dn]\nCN=localhost\n[req]\ndistinguished_name = dn\n[EXT]\n" \
"subjectAltName=DNS:localhost\nkeyUsage=digitalSignature\n" \
"extendedKeyUsage=serverAuth")
$ keyring=`keyctl newring test @u`
$ trusted=`keyctl padd asymmetric trusted $keyring < localhost.crt`; \
echo $trusted
39726322
$ keyctl search $keyring asymmetric dn:3112301006035504030c096c6f63616c686f7374
39726322
$ keyctl restrict_keyring $keyring asymmetric key_or_keyring:$trusted
$ keyctl padd asymmetric verified $keyring < localhost.crt
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add support for using elliptic curve keys for signing modules. It uses
a NIST P384 (secp384r1) key if the user chooses an elliptic curve key
and will have ECDSA support built into the kernel.
Note: A developer choosing an ECDSA key for signing modules should still
delete the signing key (rm certs/signing_key.*) when building an older
version of a kernel that only supports RSA keys. Unless kbuild automati-
cally detects and generates a new kernel module key, ECDSA-signed kernel
modules will fail signature verification.
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Prepare the x509 parser to accept NIST P384 certificates and add the
OID for ansip384r1, which is the identifier for NIST P384.
Summary of changes:
* crypto/asymmetric_keys/x509_cert_parser.c
- prepare x509 parser to load NIST P384
* include/linux/oid_registry.h
- add OID_ansip384r1
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for parsing of x509 certificates that contain ECDSA keys,
such as NIST P256, that have been signed by a CA using any of the
current SHA hash algorithms.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=HCrJ
-----END PGP SIGNATURE-----
Merge tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring updates from David Howells:
"Here's a set of minor keyrings fixes/cleanups that I've collected from
various people for the upcoming merge window.
A couple of them might, in theory, be visible to userspace:
- Make blacklist_vet_description() reject uppercase letters as they
don't match the all-lowercase hex string generated for a blacklist
search.
This may want reconsideration in the future, but, currently, you
can't add to the blacklist keyring from userspace and the only
source of blacklist keys generates lowercase descriptions.
- Fix blacklist_init() to use a new KEY_ALLOC_* flag to indicate that
it wants KEY_FLAG_KEEP to be set rather than passing KEY_FLAG_KEEP
into keyring_alloc() as KEY_FLAG_KEEP isn't a valid alloc flag.
This isn't currently a problem as the blacklist keyring isn't
currently writable by userspace.
The rest of the patches are cleanups and I don't think they should
have any visible effect"
* tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
watch_queue: rectify kernel-doc for init_watch()
certs: Replace K{U,G}IDT_INIT() with GLOBAL_ROOT_{U,G}ID
certs: Fix blacklist flag type confusion
PKCS#7: Fix missing include
certs: Fix blacklisted hexadecimal hash string check
certs/blacklist: fix kernel doc interface issue
crypto: public_key: Remove redundant header file from public_key.h
keys: remove trailing semicolon in macro definition
crypto: pkcs7: Use match_string() helper to simplify the code
PKCS#7: drop function from kernel-doc pkcs7_validate_trust_one
encrypted-keys: Replace HTTP links with HTTPS ones
crypto: asymmetric_keys: fix some comments in pkcs7_parser.h
KEYS: remove redundant memset
security: keys: delete repeated words in comments
KEYS: asymmetric: Fix kerneldoc
security/keys: use kvfree_sensitive()
watch_queue: Drop references to /dev/watch_queue
keys: Remove outdated __user annotations
security: keys: Fix fall-through warnings for Clang
Add the bit of information that makes
restrict_link_by_key_or_keyring_chain different from
restrict_link_by_key_or_keyring to the inline docs comment.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
match_string() returns the array index of a matching string.
Use it instead of the open-coded implementation.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
The function is a static function, so no needs add into kernel-doc. and
we could avoid warning:
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'pkcs7' not described in 'pkcs7_validate_trust_one'
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'sinfo' not described in 'pkcs7_validate_trust_one'
crypto/asymmetric_keys/pkcs7_trust.c:25: warning: Function parameter or
member 'trust_keyring' not described in 'pkcs7_validate_trust_one'
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: keyrings@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Drop the doubled word "the" in a comment.
Change "THis" to "This".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Cc: keyrings@vger.kernel.org
Fix W=1 compile warnings (invalid kerneldoc):
crypto/asymmetric_keys/asymmetric_type.c:160: warning: Function parameter or member 'kid1' not described in 'asymmetric_key_id_same'
crypto/asymmetric_keys/asymmetric_type.c:160: warning: Function parameter or member 'kid2' not described in 'asymmetric_key_id_same'
crypto/asymmetric_keys/asymmetric_type.c:160: warning: Excess function parameter 'kid_1' description in 'asymmetric_key_id_same'
crypto/asymmetric_keys/asymmetric_type.c:160: warning: Excess function parameter 'kid_2' description in 'asymmetric_key_id_same'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
On the following call path, `sig->pkey_algo` is not assigned
in asymmetric_key_verify_signature(), which causes runtime
crash in public_key_verify_signature().
keyctl_pkey_verify
asymmetric_key_verify_signature
verify_signature
public_key_verify_signature
This patch simply check this situation and fixes the crash
caused by NULL pointer.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Reported-by: Tobias Markus <tobias@markus-regensburg.de>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: João Fonseca <jpedrofonseca@ua.pt>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function derive_pub_key() should be calling memzero_explicit()
instead of memset() in case the complier decides to optimize away the
call to memset() because it "knows" no one is going to touch the memory
anymore.
Cc: stable <stable@vger.kernel.org>
Reported-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com>
Tested-by: Ilil Blum Shem-Tov <ilil.blum.shem-tov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/X8ns4AfwjKudpyfe@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sm2 code was split out of public_key.c in a way that breaks
modular builds. This patch moves the code back into the same file
as the original motivation was to minimise ifdefs and that has
nothing to do with splitting the code out.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When memory allocation fails, an appropriate return value
should be set.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
The method of generating Other User Information is defined as
ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
The x509 certificate supports SM2-with-SM3 type certificate
verification. Because certificate verification requires ZA
in addition to tbs data, ZA also depends on elliptic curve
parameters and public key data, so you need to access tbs in sig
and calculate ZA. Finally calculate the digest of the
signature and complete the verification work. The calculation
process of ZA is declared in specifications GM/T 0009-2012
and GM/T 0003.2-2012.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
This patch adds the OID object identifier defined by OSCCA. The
x509 certificate supports SM2-with-SM3 type certificate parsing.
It uses the standard elliptic curve public key, and the sm2
algorithm signs the hash generated by sm3.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
Fix to return negative error code -ENOMEM from kmalloc() error handling
case instead of 0, as done elsewhere in this function.
Fixes: f1774cb895 ("X.509: parse public key parameters from x509 for akcipher")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roberto Sassu