AZX_DCAPS_PM_RUNTIME flag is added to indicate support for runtime PM.
azx_has_pm_runtime() is used to check if above is enabled and thus
forbid runtime PM calls if needed.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves clock enable/disable from system resume/suspend to
runtime resume/suspend respectively. Along with this hda controller
chip init or stop is also moved. System resume/suspend can invoke
runtime callbacks and do necessary setup.
chip->running can be used to check for probe completion and device
access during runtime_resume or runtime_suspend can be avoided if
probe is not yet finished. This helps to avoid kernel panic during
boot where runtime PM callbacks can happen from system PM.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Explicit clock enable is not required during probe, as this would be
managed by runtime PM calls. Clock can be enabled/disabled in runtime
resume/suspend. This way it is easier to balance clock enable/disable
counts.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Moved devm_clk_get() API calls to a separate function and the same
can be called early in the probe. This is done before runtime PM
for the device is enabled. The runtime resume/suspend callbacks can
later enable/disable clocks respectively(the support would be added
in subsequent patches). Clock handles should be available by the
time runtime suspend/resume calls can happen.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch enables runtime power management(runtime PM) support for
hda. pm_runtime_enable() and pm_runtime_disable() are added during
device probe and remove respectively. The runtime PM callbacks will
be forbidden if hda controller does not have support for runtime PM.
pm_runtime_get_sync() and pm_runtime_put() are added for hda register
access. The callbacks for above will be added in subsequent patches.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Support speaker and mic mute LEDs on HP ProBook 470 G5.
BugLink: https://bugs.launchpad.net/bugs/1811254
Signed-off-by: Anthony Wong <anthony.wong@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The unused variable was forgotten to be removed and now we get a
compiler warning:
sound/pci/hda/hda_codec.c: In function 'hda_codec_runtime_suspend':
sound/pci/hda/hda_codec.c:2926:18: warning: unused variable 'pcm'
Fixes: 17bc4815de ("ALSA: pci: Remove superfluous snd_pcm_suspend*() calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the PCM suspend improvement / cleanup.
This moves the most of snd_pcm_suspend*() calls into PCM's own device
PM ops. There should be no change from the functionality POV.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of snd_pcm_suspend_all() & co became superfluous since we
call it in the PCM PM ops. Let's remove them.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ATIIXP driver supports the full PCM resume and saves/restores the
running PCM pointer. This used to be done in the suspend and resume
callbacks together with snd_pcm_suspend() call. But since we moved
the snd_pcm_supsend*() call in PCM device PM ops, this should be moved
to a more appropriate place, i.e. the trigger callback.
Along with the movement of the PCM suspend/resume code, remove the
superfluous snd_pcm_suspend_all() call, too.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Program codec stripe through AC_VERB_SET_STRIPE_CONTROL to use multiple
sdo lines if supported. Audio needs to be striped across number of sdo
lines for simultaneous playbacks of higher resolutions to work.
This needs to be implemented only for an Audio Output Converter and only
if the stripe bit(AC_WCAP_STRIPE) of Audio Widget Capabilities parameter
is 1.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix typo for model alc255-dell1 to alc225-dell1.
Enable headset mode support for new WYSE NB platform.
Fixes: a26d96c780 ("ALSA: hda/realtek - Comprehensive model list for ALC259 & co")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Disable Headset Mic VREF for headset mode of ALC225.
This will be controlled by coef bits of headset mode functions.
[ Fixed a compile warning and code simplification -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Forgot to add unplug function to unplug state of headset mode
for ALC225.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The "chip->dsp_spos_instance" can be NULL on some of the ealier error
paths in snd_cs46xx_create().
Reported-by: "Yavuz, Tuba" <tuba@ece.ufl.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_i2c_sendbytes could fail. The fix checks its return value: if it
fails, issues an error message and returns with its error code.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There's no reason for us to do that while we initialize dac_mute to
1. Also oxygen_init() has been clearing the OXYGEN_SPDIF_OUT_ENABLE
bit anyway.
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell has new platform for ALC274.
This will support to enable headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This essentially reverts the commits
c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present
and Skylake driver selected")
and
d82b51c855 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+
driver selection")
for the path of legacy HD-audio controller (snd-hda-intel).
The automatic DSP detection and skip of binding with the legacy driver
caused regressions on several machines like Dell XPS13. They give the
PCI class 0x40380 indicating the availability of DSP while they don't
work with ASoC SKL driver (yet).
As the support of ASoC driver for such devices isn't available, it's
better to revert the whole DSP-detection-and-skip behavior of the
legacy driver, so that we can get the old good driver working on such
devices.
The pci_binding option for ASoC SKL driver is still kept so that it
can work without blacklisting.
Fixes: c337104b1a ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Azat Khuzhin <dohardgopro@gmail.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Even after disabling interrupts on the module, it could be possible
that irq handlers are still running. System hang is seen during
suspend path. It was found that, there were pending writes on the
HDA bus and clock was disabled by that time.
Above mentioned issue is fixed by clearing any pending irq handlers
before disabling clocks and returning from hda suspend.
Suggested-by: Mohan Kumar <mkumard@nvidia.com>
Suggested-by: Dara Ramesh <dramesh@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose
CODEC is Realtek ALC294 has jack auto detection feature. This patch
enables the feature.
Fixes: 4e05110673 ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294")
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For HDaudio and Skylake drivers, add module parameter "pci_binding"
When pci_binding == 0 (AUTO), the PCI class/subclass info is used to
select drivers based on the presence of the DSP.
pci_binding == 1 (LEGACY) forces the use of the HDAudio legacy driver,
even if the DSP is present.
pci_binding == 2 (ASOC) forces the use of the ASOC driver. The
information on the DSP presence is bypassed.
The value for the module parameter needs to be identical for both
drivers. This parameter is intended as a back-up solution if the
automatic detection fails or when the DSP usage fails. Such cases
should be reported on the alsa-devel mailing list for analysis.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the SST/Skylake driver supports per platform selectors, we
can add logic to automatically select the right driver.
If the Skylake driver is selected for a specific platform, and the DSP
is detected at run-time based on the PCI class/subclass/prog-if
information, the legacy HDaudio driver aborts the probe. This will
result in a single driver probing and remove the need for modprobe
blacklists.
Follow-up patches will add a module parameter to bypass the logic if
this automatic detection fails, or if the Skylake driver is unable to
actually support the platform (firmware authentication, missing
topology file, hardware issue, etc).
The same mechanism will be used to conflicts generated by the same PCI
ID being registered by both legacy HDAuudio and SOF drivers for Intel
platforms. In other words SOF will not require changes to the HDaudio
legacy.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default, there is no sound on Asus UX391UA on Linux.
This patch adds sound support on Asus UX391UA. Tested working by three
different users.
The problem has also been described at
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1784485
Signed-off-by: Wandrille RONCE <w@ndrille.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ipcm->substream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/pci/emu10k1/emufx.c:1031 snd_emu10k1_ipcm_poke() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap)
sound/pci/emu10k1/emufx.c:1075 snd_emu10k1_ipcm_peek() warn: potential spectre issue 'emu->fx8010.pcm' [r] (local cap)
Fix this by sanitizing ipcm->substream before using it to index emu->fx8010.pcm
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
info->channel is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/pci/rme9652/hdsp.c:4100 snd_hdsp_channel_info() warn: potential spectre issue 'hdsp->channel_map' [r] (local cap)
Fix this by sanitizing info->channel before using it to index hdsp->channel_map
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
Also, notice that I refactored the code a bit in order to get rid of the
following checkpatch warning:
ERROR: do not use assignment in if condition
FILE: sound/pci/rme9652/hdsp.c:4103:
if ((mapped_channel = hdsp->channel_map[info->channel]) < 0)
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested with 4.19.9.
v2: Changed from CXT_FIXUP_MUTE_LED_GPIO to CXT_FIXUP_HP_DOCK because
that's what the existing fixups for EliteBooks use.
Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of Huawei laptops come with a LED in the micmute key. This patch
enables the use of micmute LED for these devices:
1. Matebook X (19e5:3200), (19e5:3201)
2. Matebook X Pro (19e5:3204)
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch solves bug 200501 'Only 2 of 4 speakers playing sound.'
It enables the front speakers on Huawei Matebook X Pro laptops.
These laptops come with Dolby Atmos sound system and these pins
configuration enables the front speakers.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200501
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When building without CONFIG_PCI, we can (depending on the architecture)
get a link failure:
ERROR: "pci_iounmap" [sound/pci/hda/snd-hda-codec-ca0132.ko] undefined!
Adding a compile-time check for PCI gets it to work correctly on
32-bit ARM.
Fixes: d99501b857 ("ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've excluded the display_power_control flag for Intel HSW and BDW
codecs as the HD-audio controllers of the corresponding platforms take
care of the display power as well. But the recent refactoring
separates the controller and the codec power accounting, so it's fine
to call the display PM even for HSW/BDW codecs. This is less
confusing since we can avoid this well-hidden condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the recent refactoring, snd_hdac_display_power() doesn't return
any error, hence it can be defined to return void.
This makes many error checks redundant and allows us to reduce them
gracefully.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When an error occurs in azx_probe_continue(), we should release the
display power. However, the current code ignores it and releases the
display power only for HSW/BDW cases. Fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_display_power() can be called even for a HDA controller
without DRM binding. The same is true for other helpers,
snd_hdac_i915_set_bclk() and snd_hdac_set_codec_wakeup().
So all superfluous AZX_DCAPS_I915_POWERWELL checks in hda_intel.c can
be dropped, and the definition of AZX_DCAPS_I915_POWERWELL itself can
be removed as well. This simplifies the code a lot.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current HD-audio code manages the DRM audio power via too complex
redirections, and this seems even still unbalanced in a corner case as
Intel DRM CI has been intermittently reporting. This patch is a big
surgery for addressing the complexity and the possible unbalance.
Basically the patch changes the display PM in the following ways:
- Both HD-audio controller and codec drivers call a single helper,
snd_hdac_display_power(). (Formerly, the display power control from
a codec was done indirectly via link_power bus ops.)
- snd_hdac_display_power() receives the codec address index. For
turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER.
- snd_hdac_display_power() doesn't manage refcounts any longer, but
keeps the power status in bitmap. If any of controller or codecs is
turned on, the function updates the DRM power state via get_power()
or put_power().
Also this refactor allows us more cleanup:
- The link_power bus ops is dropped, so there is no longer indirect
management, as mentioned in the above.
- hdac_device link_power_control flag is moved to hda_codec
display_power_control flag, as it's only for HDA legacy.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS UX433FN and UX333FA with ALC294 cannot detect the headset MIC
and output through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS UX533FD with ALC294 cannot detect the headset MIC and outputs
through the internal speaker and the headphone until
ALC294_FIXUP_ASUS_SPK and ALC294_FIXUP_ASUS_HEADSET_MIC quirk applied.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The known ALC256_FIXUP_ASUS_MIC fixup can fix the headphone jack
sensing and enable use of the internal microphone on this laptop
X542UN. However, it's ALC294 so create a new fixup named
ALC294_FIXUP_ASUS_MIC to avoid confusion.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make unified suspend / resume helpers and call them from both the
runtime- and the system-PM callbacks for simplifying code.
There are slight changes of call orders, but there shouldn't be any
functional difference after refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Users reported a mute LED regression on Lenovo X1 Carbon, the root
cause is we applied the fixup of ALC285_FIXUP_LENOVO_HEADPHONE_NOISE
to this machine, then the machine can't apply the fixup of
ALC269_FIXUP_THINKPAD_ACPI anymore. To fix it, we chain two fixup
together.
Fixes: c4cfcf6f42 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch will enable headset button for new Chrome platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Extend some structs to add the support for jack button changes.
Now snd_hda_jack_add_kctl() receives two more arguments: the jack type
and the jack keymaps. Both are optional, and when zero are passed,
the function behaves just like before.
For reporting button state changes, you'd need to update
jack->button_state bits accordingly, typically in the jack callback.
Then the value OR'ed with button_state and the jack plug state is
passed to snd_jack_report().
Note that currently the code assumes only the one-shot button events,
i.e. it tries to send the button release soon after sending the button
event. If a driver really supports the button release handling by
itself, we may need to introduce some flag to control this behavior in
future.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing the callee to evaluate the associated jack information
and the unsolicited event data, add the new fields to
hda_jack_callback. They can be used, for example, to retrieve the
headset button state in the callback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If it plugged headphone or headset into the jack, then
do the reboot, it will have a chance to cause headphone no sound.
It just need to run the headphone mode procedure after boot time.
The issue will be fixed.
It also suitable for ALC234 ALC274 and ALC294.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer AIO Veriton Z4860G/Z6860G with the same ALC286 codec has issues
with the input from external microphone. The issue can be fixed by
the fixup ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE for Veriton Z4660G.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer AIO Veriton Z4660G with ALC286 codec has issue with the input
from external microphones connecting via 'Front Mic' jack. The fixup
ALC286_FIXUP_ACER_AIO_MIC_NO_PRESENCE enables the jack sensing of
the headset and fix the audio input issue of external microphone.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer AIO Aspire C24-860 with ALC286 can't detect the headset
microphone. Just like another Acer AIO U27-880, it needs a different
pin value for 0x18 and the headset fixup to make headset mic work.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acer Aspire U27-880(AIO) with ALC286 codec can not detect headset mic
and internal mic not working either. It needs the similar quirk like
Sony laptops to fix headphone jack sensing and enables use of the
internal microphone.
Unfortunately jack sensing for the headset mic is still not working.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra186 and Tegra194 contain the same codecs as earlier chips and can
be supported using the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recent devices support more than the 4 codecs that the AZX core will
probe by default. Probe up to 8 codecs to make sure all of them are
enumerated.
Suggested-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a regression report for some Thinkpad models (at least
T570s) which shows the too low speaker output volume. The bisection
leaded to the commit 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad
Dock device for ALC298 platform"), and it's basically adding the two
pin configurations for the dock, and looks harmless.
The real culprit seems, though, that the DAC assignment for the
speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14
to be coupled with DAC NID 0x03. When more pins are configured by the
commit above, the auto-parser changes the DAC assignment, and this
resulted in the regression.
As a workaround, just provide the fixed pin / DAC mapping table for
this Thinkpad fixup function. It's no generic solution, but the
problem itself is pretty much device-specific, so must be good
enough.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304
Fixes: 61fcf8ece9 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a series of patches for conversion to LEDs audio-mute
trigger. It's based on 4.20-rc3 to be an immutable branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's similar to other AMD audio devices, it also supports D3, which can
save some power drain.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default HDA sound card is registered with shortname "tegra-hda".
Same driver is used across tegra platforms and it is necessary to
distinguish between platforms to use platform specific settings from
userspace. One such example is, hdmi port on different platforms use
different alsa pcm device ID. For hdmi playback to work it should
open correct pcm device depending on the platform.
This patch applies shortname from first compatible string provided
in root node of device tree. Userspace then can use this card name
to apply specific settings.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now all relevant platform drivers are providing the LED audio trigger,
we can switch the mute LED control with the LED trigger, finally.
For the mic-mute LED trigger, a common fixup function,
snd_hda_gen_fixup_micmute_led(), is provided to be called for the
corresponding quirk entries. This sets up the capture sync hook with
ledtrig_audio_set() call appropriately.
For the mute LED trigger, which is done currently only for
thinkpad_acpi, the call is replaced with ledtrig_audio_set() as well.
Overall, the beauty of the new implementation is that the whole ugly
bindings with request_symbol() are dropped, and also that it provides
more flexibility to users.
One potential behavior change by this patch is that the mute LED enum
may be created on machines that actually have no LED device. In the
former code, we did test-call and abort binding if the test failed.
But with the LED-trigger binding, this test isn't possible, and the
actual check is done in the LED class device side. So it's the
downside of simpleness.
Also, note that the HD-audio codec driver doesn't select CONFIG_LEDS
and co by itself. It's supposed to be selected by the platform
drivers instead.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch will enable ALC300.
[ It's almost equivalent with other ALC269-compatible ones, and
apparently has no loopback mixer -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device makes a loud buzzing sound when a headphone is inserted while
playing audio at full volume through the speaker.
Fixes: bbf8ff6b1d ("ALSA: hda/realtek - Fixup for HP x360 laptops with B&O speakers")
Signed-off-by: Girija Kumar Kasinadhuni <gkumar@neverware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have several Lenovo laptops with the codec alc285, when playing
sound via headphone, we can hear click/pop noise in the headphone,
if we let the headphone share the DAC of NID 0x2 with the speaker,
the noise disappears.
The Lenovo laptops here include P52, P72, X1 yoda2 and X1 carbon.
I have tried to set preferred_dacs and override_conn, but neither of
them worked. Thanks for Kailang, he told me to invalidate the NID 0x3
through override_wcaps.
BugLink: https://bugs.launchpad.net/bugs/1805079
Cc: <stable@vger.kernel.org>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MSI Cubi N 8GL (MS-B171) needs the same fixup as its older model, the
MS-B120, in order for the headset mic to be properly detected.
They both use a single 3-way jack for both mic and headset with an
ALC283 codec, with the same pins used.
Cc: stable@vger.kernel.org
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing plops on audio start/stop on the built-in audio
of the nForce 430 based ASRock N68C-S UCC motherboard, add this model to
the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Cc: <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function snd_ac97_put_spsa() gets the bit shift value from the
associated private_value, but it extracts too much; the current code
extracts 8 bit values in bits 8-15, but this is a combination of two
nibbles (bits 8-11 and bits 12-15) for left and right shifts.
Due to the incorrect bits extraction, the actual shift may go beyond
the 32bit value, as spotted recently by UBSAN check:
UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7
shift exponent 68 is too large for 32-bit type 'int'
This patch fixes the shift value extraction by masking the properly
with 0x0f instead of 0xff.
Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes the pincfg assignment for the AE-5, which was
previously using the Recon3D pincfg's by mistake.
Fixes: d06feaf02f ("ALSA: hda/ca0132 - Add pincfg for AE-5")
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new PCI subsys ID for the ZxR, as found and tested by
other users. Without a way to know if any Z's use it as well, it keeps
the quirk of QUIRK_SBZ and goes through the HDA subsys test function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct declaration is not indented correctly. Fix this by replacing
spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to call pci_iounmap() instead of iounmap() for the regions
obtained via pci_iomap() call for some archs that need special
treatment.
Fixes: aa31704fd8 ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion 15 (103c:820d) with ALC295 codec requires the quirk for
the mute LED control over mic3 pin. Added the corresponding quirk
entry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201653
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the recent support of Creative boards and onboard audio depend on
PCI, but they can't be trimmed easily even if you build without
CONFIG_PCI, since the quirk is detected dynamically and the code has
many branches with the flag check like spec->quirk type or
spec->use_alt_functions.
This patch makes these checks static for CONFIG_PCI=n case so that the
compiler optimizes out. The access to flags are replaced with macros
that are replaced with a static value for CONFIG_PCI=n.
The macros look slightly ugly for avoiding compiler warnings wrt
unused variables, and some additional default-case handlings for
another compiler warnings, but the rest are very straightforward
changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the commit c647f806b8 ("ALSA: hda - Allow multiple ADCs for
mic mute LED controls") we allow enabling the mic mute LED with
multiple ADCs. The commit changed the function return value to be
zero or a negative error, while this change was overlooked in the
thinkpad_acpi helper code where it still expects a positive return
value for success. This eventually leads to a NULL dereference on a
system that has only a mic mute LED.
This patch corrects the return value check in the corresponding code
as well.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201621
Fixes: c647f806b8 ("ALSA: hda - Allow multiple ADCs for mic mute LED controls")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.
The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.
The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.
This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.
Signed-off-by: Alex Stanoev <alex@astanoev.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlvNuPoTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0CsxB/91P2RgcUhBSkPO3jsFSerc+RccqD8j
XogqjC62V2T3xqVUYtqqLf0dZFKUPFNoFitN2XdNU36H55DVI+3wxxmwObc64RIc
uB6ptQuwFz7vGeF6r6GWFUAZ7MB518dq/oZYRKrjAW49Lt2YiCD0HJ2gi+0Hm66A
53I7SLH3Q386UHDd+dl7+9BN7gPt0OIKAdsc/Vq7BDYvP+cNEm+YYjXGwaHjLLEC
o8vmj8Ny6x0dytdYuQ/XuekBhGopcfqTbWTpTu43/jCd5rumQXQY2g9CC1eRMlEJ
cm1hOjAErmKkkg2S84B1cMAvK23Szu36sPyeCphSQWOhlL4CFPVyJqic
=9A07
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.0/v4.20
As ever there's a lot of small and driver specific changes going on
here, but we do also have some relatively large changes in the core
thanks to the hard work of Charles and Morimoto-san:
- More component transitions from Morimoto-san, I think we're about
finished with this. Thanks for all the hard work!
- Morimoto-san also added a bunch of for_each_foo macros
- A bunch of cleanups and fixes for DAPM from Charles.
- MCLK support for several different devices, including CS42L51, STM32
SAI, and MAX98373.
- Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and
MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and
TI PCM3060.
This patch fixes the microphone issue for all cards. The previous fix
worked on the ZxR, but not on the AE-5 or Z. This patch has been tested
to work for all cards.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Power-saving is causing plops on audio start/stop on Dell Precision T3600
laptops and Intel DZ77BH boards, add these to the power_save blacklist.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DMA API does its own zone decisions based on the coherent_dma_mask.
[ Note: as the driver doesn't set the DMA coherent mask, we can assume
the default 32bit DMA, hence it should be safe to drop the flag here
-- tiwai ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As a preparatory patch for the upcoming -Wimplicit-fallthrough
compiler checks, add the "fall through" annotation in au88xx driver.
Although the usages in both both functions vortex_adbdma_setbuffers()
and vortex_wtdma_setbuffers() look a bit suspicious, we keep the
behavior as before, just to be safer. If it were broken, we should
have already received bug reports.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo G50-30, like other G50 models, has a Conexant codec that
requires a quirk for its inverted stereo dmic.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1249364
Reported-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Tested-by: Alexander Ploumistos <alex.ploumistos@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The front MIC on the Lenovo M715 can't record sound, after applying
the ALC294_FIXUP_LENOVO_MIC_LOCATION, the problem is fixed. So add
the pin configuration of this machine to the pin quirk table.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BIOS on ASUS G751 doesn't seem to map the headphone pin (NID 0x16)
correctly. Add a quirk to address it, as well as chaining to the
previous fix for the microphone.
Reported-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the echo cancellation control for desktop cards, and
makes use of the special 0x47 SCP command for noise reduction.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up the patch_ca0132() function with suggestions from
Takashi Sakamoto.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes microphone inconsistency issues by adding a delay to
each setup_defaults function. Without this, the microphone only works
intermittently.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a corresponding model list entry for ASUS G751 so that user can
test the quirk for another compatible machines more easily.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS G751 requires the extra COEF initialization to make it microphone
working properly.
Reported-and-tested-by: Håvard <hovardslill@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.
Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.
Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The issue is the same as commit dd9aa335c8 ("ALSA: hda/realtek - Can't
adjust speaker's volume on a Dell AIO"), the output requires to connect
to a node with Amp-out capability.
Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1775068
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch removes the input select control for the ZxR, as it only has
one input option, rear microphone.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for selecting input and output on the Sound
Blaster ZxR. The ZxR has no front panel header, and has line-in on the
separate daughter board, so it only does rear-mic.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands for setting up the ZxR after the DSP is
downloaded. The ZxR already shares most of the post-download commands
from the regular Sound Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds separate hda_codec_ops for the DBPro daughter board, as
it behaves more like a generic HDA codec than the other ca0132 cards,
despite having a ca0132 on board.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a pincfg for the ZxR, and defines which pins are used
for both.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirk ID's for the ZxR and it's daughter board, the
DBPro. It also adds a function for determining the quirk for each board
through HDA subsytem ID's instead of PCI subsystem ID's.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes an issue where if surround sound was the selected
output and output effects were enabled, the sound wasn't sent to all
channels correctly.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace "fallthru" with a proper "fall through" annotation.
This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change of vga_switcheroo allowed the runtime PM for
HD-audio on AMD GPUs, but this also resulted in a regression. When
the HD-audio controller driver gets runtime-suspended, HD-audio link
is turned off, and the hotplug notification is ignored. This leads to
the inconsistent audio state (the connection isn't notified and ELD is
ignored).
The best fix would be to implement the proper ELD notification via the
audio component, but it's still not ready. As a quick workaround,
this patch adds the check of runtime_idle and allows the runtime
suspend only when the vga_switcheroo is bound with discrete GPU.
That is, a system with a single GPU and APU would be again without
runtime PM to keep the HD-audio link for the hotplug notification and
ELD read out.
Also, the codec->auto_runtime_pm flag is set only for the discrete GPU
at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is
forcibly runtime-PM enabled), so that APU can still get the ELD
notification.
For identifying which GPU is bound, a new vga_switcheroo client
callback, gpu_bound, is implemented. The vga_switcheroo simply calls
this when GPU is bound, and tells whether it's dGPU or APU.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945
Fixes: 07f4f97d7b ("vga_switcheroo: Use device link for HDA controller")
Reported-by: Jian-Hong Pan <jian-hong@endlessm.com>
Tested-by: Jian-Hong Pan <jian-hong@endlessm.com>
Acked-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The interrupt handler has to be acquired after the other resource
initialization when allocated with IRQF_SHARED. Otherwise it's
triggered before the resource gets ready, and may lead to unpleasant
behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Include asm/io.h directly so we've got a definition of pci_iomap(), the
current set of includes do this implicitly on most architectures but not
on SH.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_X86=n function azx_snoop doesn't use the variable chip it
only returns true.
sound/pci/hda/hda_intel.c: In function ‘dma_alloc_pages’:
sound/pci/hda/hda_intel.c:2002:14: warning: unused variable ‘chip’ [-Wunused-variable]
struct azx *chip = bus_to_azx(bus);
^~~~
Create a inline function of azx_snoop.
Fixes: a41d122449 ("ALSA: hda - Embed bus into controller object")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates
memory using kmalloc() and partially fills it by calling
snd_emu10k1_fx8010_info() before returning the resulting
structure to userspace, leaving uninitialized holes. Let's
just use kzalloc() here.
BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced PCM info flag assures the call of ack ops at
each applptr change, and this is mandatory for the indirect PCM
helpers.
Also, with the proper ack callback, we need no longer prefill at
trigger start. The relevant code can be killed.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For easier sharing with ASoC.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluIAxkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0NVNB/0cE/j09cyBR80x5gvnFE3Z5NEPNPLP
yl7sD93xFP6iww3CGJjXgxxDTh2sf7Sro4hcR9ZdD9zSSQ1qMVVY28MJ1YUsbFPu
TeUkqRFNPjgOpSmwK7T5QpVbIvdTZmmht8umgQ2+Y4vsGu1aKZf80ZT2n/2mjTOe
bEYfpyjP5V1aVL8JcX4TN3hbGZ2Pth5m404Qe0pkIdv4qqLx2edphJQ7ecU8w3kK
vTg1gfo7j9CKx7rzHZei/cvA3qXl/g9oufHAfpJDrlYFz6N35qwpA5UCyXqcFVo2
kZtyFbaBAvBjnhVyMNkdG7PvBMlL6HMLxN3fJbMLPPS30/+IuAsHXkZY
=wtBB
-----END PGP SIGNATURE-----
Merge tag 'hda-codec-h-move' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ALSA: Move hda_codec.h to include/sound
For easier sharing with ASoC.
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset(). This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.
As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.
This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the jackpoll_ms option value is passed indirectly by
referring to an array in chip->jackpoll_ms although each card needs to
see only the assigned value. Also, the sanity check is done at each
time in get_jackpoll_interval() although basically jackpoll_ms option
is a read-only, hence we need to evaluate only once at probe time.
This patch is the code simplification about the above points: the jack
polling interval is directly set to chip->jackpoll_interval so that it
can be simply copied to each codec.
No functional change but only code reduction.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a kernel module which is used by the legacy HDA
codec drivers as library. This implements hdac_ext_bus_ops to enable
the reuse of legacy HDA codec drivers with ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
intel8x0 driver requires the non-cached pages for 440MX workaround,
and this can be implemented more easily with the new memalloc type,
SNDRV_DMA_TYPE_DEV_UC. This allows us to reduce lots of code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since we dropped the memory page fiddling in the own allocators in
hda_intel.c, the substream allocation and free ops in both hda_intel.c
and hda_tegra.c became nothing but the simple calls of the standard
snd_pcm_lib helpers. As both are identical, there is no longer need
for indirect calls via ops; it's a good opportunity for removing ops
and simplifying the codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now the ALSA memory allocator helper supports the new non-cached
pages, let's use the new type, SNDRV_DMA_TYPE_DEV_UC_SG, for HD-audio
driver. This allows us to reduce lots of codes.
As another positive side-effect by this patch, the long-standing issue
with non-snoop mode playing in the non-mmap mode is fixed. The core
memalloc helper does the proper pgprot setup for non-cached pages for
vmap(), which was missing in the past.
Reported-and-tested-by: Hans Hu <HansHu@zhaoxin.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new flag, uc_buffer, to indicate that the controller
requires the non-cached pages for stream buffers, either as a
chip-specific requirement or specified via snoop=0 option.
This improves the code-readability.
Also, this patch fixes the incorrect behavior for C-Media chip where
the stream buffers were never handled as non-cached due to the check
of driver_type even if you pass snoop=0 option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Trivial fix to spelling mistake in dev_dbg message and also remove
extraneous white space and repeated question marks.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
no surprises here: a regression fix for virmidi code refactoring,
three fixes for the new AC97 bus compat and runtime PM, and a usual
HD-audio quirk.
-----BEGIN PGP SIGNATURE-----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=381l
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No surprises here: a regression fix for virmidi code refactoring,
three fixes for the new AC97 bus compat and runtime PM, and a usual
HD-audio quirk"
* tag 'sound-fix-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix HP Headset Mic can't record
ALSA: ac97: fix unbalanced pm_runtime_enable
ALSA: ac97: fix check of pm_runtime_get_sync failure
ALSA: ac97: fix device initialization in the compat layer
ALSA: seq: virmidi: Fix discarding the unsubscribed output
This patch will fix HP workstation Headset Mic not recording.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit c647f806b8 ("ALSA: hda - Allow multiple ADCs for mic mute LED
controls") changed the return value of the snd_hda_gen_add_micmute_led()
without actually updating the callers.
Admittedly, almost no callers actually cared about the return value.
But one call site very much did: the Dell wmi code. It would see the
registration return zero, which _used_ to mean "failed" but now means
"success", and clear the dell_micmute_led_set_func pointer.
End result: the successful registration would end up calling the Dell
code that thought it had all failed, and call through a NULL pointer.
To make matters worse, it ends up being a tail-call, and with the
retpoline sequence you don't even see the caller (dell_micmute_update())
in the stack trace, so the error ended up way less obvious than it
should have been.
Fixes: c647f806b8 "ALSA: hda - Allow multiple ADCs for mic mute LED controls"
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comment with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Addresses-Coverity-ID: 114889 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds exit functions for the Recon3D, and cleans up the
current exit function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 115156 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Notice that in this particular case, I replaced the code comment with
a proper "fall through" annotation, which is what GCC is expecting
to find.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device has the same issues as the HP x360 wrt the MUTE LED and
the front speakers not working. This patch fixes the MUTE LED issue,
but doesn't touch the HDA verbs. The fix for the x360 does not work
on the Spectre.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer 'dir' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'dir' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array pcm_devs is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'pcm_devs' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable attn is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'attn' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer 'dma' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up two clang warnings:
warning: variable 'dma' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable max_streams is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'max_streams' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach. This will
simplify the code and make easier to find the unbalanced mutex locks.
No functional changes, but only the code readability improvement as a
preliminary work for further changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.
Adding a 10ms artificial delay before rebooting fixes the issue entirely.
Patch for Realtek codecs also adds the same amount of delay after
entering D3.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.
Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.
Now that we know that this bug is subject to multiple codecs,
fix the comment as well.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hw_pll_init(), hw_dac_stop(), hw_dac_start() and hw_adc_init()
are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hw_pll_init(), hw_reset_dac() and hw_card_init() are never
called in atomic context.
They calls mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DMA address table in atiixp modem driver is in little-endian,
hence we should define it with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/atiixp_modem.c:360:28: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The DMA address table in atiixp driver is in little-endian, hence we should define it with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/atiixp.c:393:28: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The RISC data in bt87x is in little-endian, hence we should define it
with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/bt87x.c:240:17: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many data fields defined in echoaudio drivers are in little-endian,
hence they should be defined with __le16 or __le32. This makes it
easier to catch the forgotten conversions.
Spotted by sparse, a warning like:
sound/pci/echoaudio/echoaudio_dsp.c:990:36: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASSP data passed to maestro3 driver is in little-endian format,
hence the data pointer should be with __le16.
Spotted by sparse, warnings like:
sound/pci/maestro3.c:2128:35: warning: cast to restricted __le16
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BD address tables in intel8x0m driver are in little-endian, hence
they should be represented as __le32 instead u32.
Spotted by sparse, warnings like:
sound/pci/intel8x0m.c:406:40: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BD address tables in intel8x0 driver are in little-endian, hence
they should be represented as __le32 instead u32.
Spotted by sparse, warnings like:
sound/pci/intel8x0.c:688:40: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BDL entries in lola driver are little-endian while we code them as
u32. This leads to sparse warnings like:
sound/pci/lola/lola.c:105:40: warning: incorrect type in assignment (different base types)
sound/pci/lola/lola.c:105:40: expected unsigned int [unsigned] [usertype] <noident>
sound/pci/lola/lola.c:105:40: got restricted __le32 [usertype] <noident>
This patch fixes the declarations to the proper __le32 type.
Also, there was a typo in the original code, where __user was used
that was intended as __iomem. This was caused also by sparse:
sound/pci/lola/lola_mixer.c:132:27: warning: incorrect type in assignment (different address spaces)
Fixed in this patch as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The miXart driver deals with big-endian values as raw data, while it
declares most of variables as u32. This leads to sparse warnings like
sound/pci/mixart/mixart.c:1203:23: warning: cast to restricted __be32
Fix them by properly defining the structs and add the explicit cast to
macros.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SG descriptor of Riptide contains the little-endian values, hence
we need to define with __le32 properly. This fixes sparse warnings
like:
sound/pci/riptide/riptide.c:1112:40: warning: cast to restricted __le32
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The TLB entries in Trident driver are represented in little-endian,
hence they should be declared as __le32.
This patch fixes the sparse warnings like:
sound/pci/trident/trident_memory.c:226:17: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bank values are all little-endians, so they should be defined with
__le32. This fixes lots of sparse warnings like:
sound/pci/ymfpci/ymfpci_main.c:315:23: warning: cast to restricted __le32
sound/pci/ymfpci/ymfpci_main.c:342:32: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
asihpi driver treats -1 as an own invalid PCM format, but this needs
a proper cast with __force prefix since PCM format type is __bitwise.
Define a constant with the proper type and use it allover.
This fixes sparse warnings like:
sound/pci/asihpi/asihpi.c:315:9: warning: incorrect type in initializer (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM format type is with __bitwise, and it can't be converted from
integer implicitly. Instead of an ugly cast, declare the function
argument of vortex_alsafmt_aspfmt() with the proper snd_pcm_format_t
type.
This fixes the sparse warning like:
sound/pci/au88x0/au88x0_core.c:2778:14: warning: restricted snd_pcm_format_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM format type is with __bitwise, hence it needs to be explicitly
declared as snd_pcm_format_t, as warned by sparse:
sound/pci/riptide/riptide.c:1028:34: warning: incorrect type in argument 1 (different base types)
sound/pci/riptide/riptide.c:1028:34: expected restricted snd_pcm_format_t [usertype] format
sound/pci/riptide/riptide.c:1028:34: got unsigned char [unsigned] format
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The meddlesome gcc warns about the possible shortname string in
trident driver code:
sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
strcat(card->shortname, card->driver);
It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.
For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cast between user-space and kernel-space needs an explicit __force
prefix, but it's missing in many places in emu10k1 driver code.
Spotted by sparse as a warning like:
sound/pci/emu10k1/emufx.c:529:33: warning: cast removes address space of expression
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The user-copy callbacks in korg1212 driver contain the explicit cast
from a user pointer to a kernel pointer, but they missed __force
prefix. It's mandatory for converting between them.
Spotted by sparse, a warning like:
sound/pci/korg1212/korg1212.c:1329:33: warning: cast removes address space of expression
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The knew->iface field is in snd_ctl_elem_iface_t, which is with
__bitwise, hence it can't be converted implicitly from integer.
Give an explicit cast for the invalid type.
Spotted by sparse:
sound/pci/hda/hda_codec.c:3280:25: warning: restricted snd_ctl_elem_iface_t degrades to integer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use NULL for initializing the snd_kcontrol_new.tlv field, instead of
0, as warned by sparse:
sound/pci/hda/patch_ca0132.c:5519:22: warning: Using plain integer as NULL pointer
Also, the driver does the same initialization twice, once for
knew.tlv.c and another for knew.tlv.p while both point to the same
address (these are union). Drop the latter superfluous one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
One place in cs5535audio_build_dma_packets() does an extra conversion
via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops,
which writes the value via cs_writel(). That is, the callback does
the conversion by itself, and we don't need to convert beforehand.
This patch fixes that bogus conversion.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The endian conversions used in vx2_dma_read() and vx2_dma_write() are
superfluous and even wrong on big-endian machines, as inl() and outl()
already do conversions. Kill them.
Spotted by sparse, a warning like:
sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types)
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull the generic drm_audio_component support, which will be used later
for AMD/ATI and other HD-audio HDMI codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI SSID 1558:95e1 needs the same quirk for other Clevo P950
models, too. Otherwise no sound comes out of speakers.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1101143
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is the final step for more generic support of DRM audio
component. The generic audio component code is now moved to its own
file, and the symbols are renamed from snd_hac_i915_* to
snd_hdac_acomp_*, respectively. The generic code is enabled via the
new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is
kept as the super-class.
Along with the split, three new callbacks are added to audio_ops:
pin2port is for providing the conversion between the pin number and
the widget id, and master_bind/master_unbin are called at binding /
unbinding the master component, respectively. All these are optional,
but used in i915 implementation and also other later implementations.
A note about the new snd_hdac_acomp_init() function: there is a slight
difference between this and the old snd_hdac_i915_init(). The latter
(still) synchronizes with the master component binding, i.e. it
assures that the relevant DRM component gets bound when it returns, or
gives a negative error. Meanwhile the new function doesn't
synchronize but just leaves as is. It's the responsibility by the
caller's side to synchronize, or the caller may accept the
asynchronous binding on the fly.
v1->v2: Fix missing NULL check in master_bind/unbind
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio i915 binding code contains a single pointer, hdac_acomp,
for allowing the access to audio component from the master bind/unbind
callbacks. This was needed because the callbacks pass only the device
pointer and we can't guarantee the object type assigned to the drvdata
(which is free for each controller driver implementation).
And this implementation will be a problem if we support multiple
components for different DRM drivers, not only i915.
As a solution, allocate the audio component object via devres and
associate it with the given device, so that the component callbacks
can refer to it via devres_find().
The removal of the object is still done half-manually via
devres_destroy() to make the code consistent (although it may work
without the explicit call).
Also, the snd_hda_i915_register_notifier() had the reference to
hdac_acomp as well. In this patch, the corresponding code is removed
by passing hdac_bus object to the function, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing other drivers to use the DRM audio component, rename the
i915_audio_component_* with drm_audio_component_*, and split the
generic part into drm_audio_component.h. The i915 specific stuff
remains in struct i915_audio_component, which contains
drm_audio_component as the base.
The license of drm_audio_component.h is kept to MIT as same as the the
original i915_component.h.
This is a preliminary change for further development, and no
functional changes by this patch itself, merely code-split and
renames.
v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915
argument in drm_audio_component.h
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make use of the swap macro and remove unnecessary variable *tmp*. This
makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On modern laptop, there are more and more platforms
have two GPUs, and each of them maybe have audio codec
for HDMP/DP output. For some dGPU which is no output,
audio codec usually is disabled.
In currect HDA audio driver, it will set all codec as
VGA_SWITCHEROO_DIS, the audio which is binded to UMA
will be suspended if user use debugfs to contorl power
In HDA driver side, it is difficult to know which GPU
the audio has binded to. So set the bound gpu pci dev
to vga_switcheroo.
if the audio client is not the third registration, audio
id will set in vga_switcheroo enable function. if the
audio client is the last registration when vga_switcheroo
_ready() get true, we should get audio client id from bound
GPU directly.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds some required quirk when uses headset or headphone on
Panasonic CF-SZ6.
Signed-off-by: YOKOTA Hiroshi <yokota.hgml@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio mute led does not work on HP ProBook 455 G5,
this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it.
BugLink: https://bugs.launchpad.net/bugs/1781763
Reported-by: James Buren
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Except PCI_CLASS_DISPLAY_VGA, some PCI class is sometimes
PCI_CLASS_DISPLAY_3D or PCI_CLASS_DISPLAY_OTHER.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer 'ins' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'ins' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer 'codec' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'codec' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI subsystem in question for this quirk rule has been
identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the
device name appropriately.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These motherboards have Sound Core3D and apparently "support"
Recon3Di. Added to the quirk list as QUIRK_R3DI.
Issue report, PCI Subsystem ID, and testing by a contributor on
IRC who wished to remain anonymous.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have two new lenovo desktop models which need to apply the fixup of
ALC294_FIXUP_LENOVO_MIC_LOCATION, and they have the same pin cfg as
the machine with subsystem id:0x17aa3136, now use the pincfg table
to apply the fixup for them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Obtaining the runtime pm wakeref can fail, especially in a hotplug
scenario where i915.ko has been unloaded. If we do not catch the
failure, we end up with an unbalanced pm.
v2 additions by tiwai:
hdmi_present_sense() checks the return value and handle only a
negative error case and bails out only if it's really still suspended.
Also, snd_hda_power_down() is called at the error path so that the
refcount is balanced.
Along with it, the spec->pcm_lock is taken outside
hdmi_present_sense() in the caller side, so that it won't cause
deadlock at reentrace via runtime resume.
v3 fix by tiwai:
Missing linux/pm_runtime.h is included.
References: 222bde0388 ("ALSA: hda - Fix mutex deadlock at HDMI/DP hotplug")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When i915 component binding fails, it means that HDMI isn't applicable
anyway. Although the probe with the generic HDMI parser would still
work, it's essentially useless, hence better to be left unbound.
This patch mimics the probe_id field at failing the i915 component
binding so that the generic HDMI won't be bound after that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch can make audio controller in AMD Raven Ridge gets runtime
suspended to D3, to save ~1W power when it's not in use.
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split snd_hda_codec_new into two separate functions.
snd_hda_codec_device_init allocates memory and registers with bus.
snd_hda_codec_device_new initialializes the fields and performs
snd_device_new. This enables reuse of legacy HDA codec drivers as ASoC
codec drivers.
In addition mark some functions with EXPORT_SYMBOL_GPL so that it can
be called by ASoC wrapper around the legacy HDA driver (hdac_hda).
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The in_pm atomic in hdac_device is an important field used as a flag
as well as a refcount for PM. The existing snd_hdac_power_up/down
helpers already refer to it in the HD-audio core code, while the code
to actually setting the value (atomic_inc() / _dec()) is open-coded in
HDA legacy side, which is hard to find.
This patch adds the helper functions to set/reset the in_pm counter to
HDA core and use them in HDA legacy side, for making it clearer who /
where the PM is managed.
There is no functional changes, just code refactoring.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.
Let's unify and replace with the latter one consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More comprehensive list of model strings for ALC882 & co.
Also corrected the subsection in models.rst, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous commit for ALC662, let's give more comprehensive
list of model entries for ALC269 & co as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC662 and others have far more fixup entries than the model table.
Let's add more model string entries so that user can test / debug
without compiling kernels at each time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently patch_alc269() calls the fixup with HDA_FIXUP_ACT_PRE_PROBE
before setting up the codec model-specific setups (e.g. setting
codec_variant or mixer_nid setup). This is rather confusing as others
do call the *_PRE_PROBE fixup after such a setup. Due to this
disorder, we have to override spec->shutup not at the usual
HDA_FIXUP_ACT_PRE_PROBE but the unusual HDA_FIXUP_ACT_PROBE time.
This patch corrects the fixup call orders in patch_alc269(), and also
corrects the action to set up spec->shutup accordingly.
No functional changes but just refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In this patch, the remaining static init verbs in VIA codec driver are
converted to the standard snd_hda_add_verbs() calls. The conversion
is straightforward, but one change to be noted is the place of calls:
since these verbs are supposed to be executed at the beginning of the
init / resume procedure, we need to add snd_hda_add_verbs() calls
before calling the other parsers.
This is merely a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch replaces the control element creations in VIA codec driver
with the standard snd_hda_gen_add_kctl() calls as a cleanup. There
are two major fields targeted by this patch: the beep controls and
static init controls.
The former is converted just like other codec drivers do. The
spec->beep_amp field can be eliminated by this change as well.
The latter, static init controls, are replaced simply with explicit
snd_hda_gen_add_kctl() calls.
After these conversions, via_build_controls() becomes superfluous and
replaced with snd_hda_gen_build_controls(), too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently VIA codec driver invokes via_free() at each place of the
error path. Move the error handling to the end of each function
commonly and do goto-error as a standard idiom.
This is a preliminary patch for the further cleanups, and no
functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch moves the mixer creation code in Cirrus codec driver from
its own build_controls callback to snd_hda_gen_add_kctl() for
simplification.
As a bonus, this allows us to remove the cs421x_build_controls as it
becomes identical with snd_hda_gen_build_controls().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous commit for Realtek codec, the similar cleanup work
can be applied to Conexant codec, too. A slight difference is that
the call of cx_auto_parse_beep() is moved after
snd_hda_gen_parse_auto_config(). It's not strictly needed, but it'd
be good to make the creation of such beep mixers at the end, which
matches with the former situation.
Along with this conversion, cx_auto_build_controls() becomes just
calling snd_hda_gen_build_controls(), so it's simply replaced with
snd_hda_gen_build_controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the Realtek codec driver, we used to build kctl elements for beep
mixer in the own build_controls callback. This is an open-code and
can be covered by the standard feature of the generic parser with
snd_hda_gen_add_kctl() instead.
Also, after the conversion, spec->beep_amp becomes superfluous; hence
it's removed along with the conversion.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The beep mixer controls are the only remaining stuff that uses
spec->mixers[] array, and they can be well converted to the standard
helper in the generic parser, snd_hda_gen_add_kctl().
This simplifies the code, especially the superfluous mixers and
num_mixers fields can be now removed from alc_spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALC660VD_FIX_ASUS_GPIO1 quirk requires to set up GPIO bit0 ON
while bit 1 OFF. Implement the fixup function and convert from the
static init verbs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell XPS13 has multi-step fixups, and one of them
(ALC288_FIXUP_DELL_XPS_13_GPIO6) corresponds to the management of GPIO
bit6 (0x40). It used to be a static init verbs (to turn *off* the
bit6).
In this patch, we convert it as the gpio_mask and gpio_dir
initializations folded in the existing fixup function. With this
change, ALC288_FIXUP_DELL_XPS_13_GPIO6 becomes superfluous, thus it's
removed.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch converts the remaining static init verbs for GPIO bits with
the common gpio_* fields management. Only the verbs setting the GPIO
data bits are targeted in this patch. The rest will be changed in
later patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we can simplify the mute LED GPIO handling as well. Each fixup
dealing with GPIO for the mute LED controls defined the static init
verbs, and they are converted to the common GPIO bit fields with the
new helper, alc_fixup_hp_gpio_led().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fixup for Macbook Pro is nothing but setting the GPIO bits as
usual but with one exception: it adds some delay at writing the GPIO
bits.
Add a flag to put the conditional delay in the common helper, and
clean up alc885_fixup_macpro_gpio() with the new flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Until now, two fields, gpio_data and gpio_led, coexist in alc_spec
although basically both of them serve for the same purpose -- the GPIO
data bits.
This patch consolidates both usages and eliminates the superfluous
gpio_led field.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For updating GPIO bits dynamically, provide a new helper, and use it
from the alc260 automute hook. This helper will be used by other
places in future, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the GPIO bits are managed by individual verbs in some cases
while toggled dynamically in other cases. For simplifying the GPIO
management, define the GPIO mask, dir and data bits in alc_spec
fields, and refer to / set them consistently from all places.
As a first step, along with the definition of the new gpio_* fields,
this patch replaces the static verbs that are used at initialization
and fixups with the common helper functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some devices have the overrides of spec->init_amp at
HDA_FIXUP_ACT_PROBE just because alc_ssid_check() gives the
false-positive values from the SSID.
For more consistent behavior, define the logic in the following way:
- Define ALC_INIT_UNDEFINED as the default value before calling
alc_ssid_check()
- Each fixup may set up spec->init_amp with another value at
HDA_FIXUP_ACT_PRE_PROBE
- At detection, check whether spec->init_amp is ALC_INIT_UNDEFINED or
not; if it's different, we skip the detection
Also, it turned out that ASUS TX300 requires the spec->init_amp
override, too; currently it ignores the GPIO bits implicitly by its
static init verb, but this will be changed in the later patchset.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have 3 more Lenovo machines, they all have 2 front mics on them,
so they need the fixup to change the location for one of two mics.
Among these 3 Lenovo machines, one of them has the same pin cfg as the
machine with subid 0x17aa3138, so use the pin cfg table to apply fixup
for them. The rest machines don't share the same pin cfg, so far use
the subid to apply fixup for them.
Fixes: a3dafb2200 ("ALSA: hda/realtek - adjust the location of one mic")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fujitsu Seimens ESPRIMO Mobile U9210 requires the same fixup as H270
for the correct pin configs.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200107
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array ca0132_alt_chmaps is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'ca0132_alt_chmaps' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai