Add a checking routine what types are supported by the running kernel by
finding the pattern in <debugfs>/tracing/README.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Naohiro Aota <naohiro.aota@hgst.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/147151071172.12957.3340095690753291085.stgit@devbox
[ 'enum probe_type' has no negative entries, so ends up as 'unsigned', remove '< 0'
test to fix the build on at least centos:5, debian:7 & ubuntu:12.04.5 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show SDT and pre-cached events by perf-list with "sdt". This also shows
the binary and build-id where the events are placed only when there are
same name events on different binaries.
e.g.:
# perf list sdt
List of pre-defined events (to be used in -e):
sdt_libc:lll_futex_wake [SDT event]
sdt_libc:lll_lock_wait_private [SDT event]
sdt_libc:longjmp [SDT event]
sdt_libc:longjmp_target [SDT event]
...
sdt_libstdcxx:rethrow@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:rethrow@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
sdt_libstdcxx:throw@/usr/bin/gcc(0cc207fc4b27) [SDT event]
sdt_libstdcxx:throw@/usr/lib64/libstdc++.so.6.0.20(91c7a88fdf49)
The binary path and build-id are shown in below format;
<GROUP>:<EVENT>@<PATH>(<BUILD-ID>)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160624090646.25421.44225.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allo glob wildcard for reusing cached/SDT events. E.g.
# perf probe -x /usr/lib64/libc-2.20.so -a %sdt_libc:\*
This example adds probes for all SDT in libc.
Note that the SDTs must have been scanned by perf buildid-cache.
Committer note:
Using it to check what of those SDT probes would take place when doing
a cargo run (rust):
# trace --no-sys --event sdt_libc:* cargo run
0.000 sdt_libc:setjmp:(7f326b69c4d1))
28.423 sdt_libc:setjmp:(7f4b0a5364d1))
29.000 sdt_libc:setjmp:(7f4b0a5364d1))
88.597 sdt_libc:setjmp:(7fc01fd414d1))
89.220 sdt_libc:setjmp:(7fc01fd414d1))
95.501 sdt_libc:setjmp:(7f326b69c4d1))
Running `target/debug/hello_world`
97.110 sdt_libc:setjmp:(7f95e09234d1))
Hello, world!
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831791813.17065.17846564230840594888.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf buildid-cache --add <binary> scans given binary and add
the SDT events to probe cache. "sdt_" prefix is appended for
all SDT providers to avoid event-name clash with other pre-defined
events. It is possible to use the cached SDT events as other cached
events, via perf probe --add "sdt_<provider>:<event>=<event>".
e.g.
----
# perf buildid-cache --add /lib/libc-2.17.so
# perf probe --cache --list | head -n 5
/usr/lib/libc-2.17.so (a6fb821bdf53660eb2c29f778757aef294d3d392):
sdt_libc:setjmp=setjmp
sdt_libc:longjmp=longjmp
sdt_libc:longjmp_target=longjmp_target
sdt_libc:memory_heap_new=memory_heap_new
# perf probe -x /usr/lib/libc-2.17.so \
-a sdt_libc:memory_heap_new=memory_heap_new
Added new event:
sdt_libc:memory_heap_new (on memory_heap_new
in /usr/lib/libc-2.17.so)
You can now use it in all perf tools, such as:
perf record -e sdt_libc:memory_heap_new -aR sleep 1
# perf probe -l
sdt_libc:memory_heap_new (on new_heap+183 in /usr/lib/libc-2.17.so)
----
Note that SDT event entries in probe-cache file is somewhat different
from normal cached events. Normal one starts with "#", but SDTs are
starting with "%".
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736025058.27797.13043265488541434502.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe --del' removes caches when '--cache' is given. Note that
the delete pattern is not the same as for normal events.
If you cached probes with event name, --del "eventname" works as
expected. However, if you skipped it, the cached probes doesn't have
actual event name. In that case --del "probe-desc" is required (wildcard
is acceptable). For example a cache entry has the probe-desc "vfs_read
$params", you can remove it with --del 'vfs_read*'.
-----
# perf probe --cache --list
/[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
vfs_read $params
/usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
getaddrinfo $params
# perf probe --cache --del vfs_read\*
Removed cached event: probe:vfs_read
# perf probe --cache --list
/[kernel.kallsyms] (1466a0a250b5d0070c6d0f03c5fed30b237970a1):
/usr/lib64/libc-2.17.so (c31ffe7942bfd77b2fca8f9bd5709d387a86d3bc):
getaddrinfo $params
-----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736021651.27797.10250879847070772920.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before analyzing debuginfo, try to find a corresponding entry from probe
cache always. This does not depend on --cache, the --cache enables to
store/update cache, but looking up the cache is always enabled.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146736019226.27797.16366402884098398857.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce perf_cache object and interfaces to create, add entries,
commit, and delete the object.
perf_cache represents a file for the cached "perf probe" definitions on
one binary file or vmlinux which has its own build id. The probe cache
file is located under the build-id cache directory of the target binary,
as below;
<perf-debug-dir>/.build-id/<BU>/<ILDID>/probe
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160615032830.31330.84998.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Showing actual trace event when deleteing perf events is only needed in
perf probe command. But the add functionality itself can be used by
other places. So move the printing code into the cmd_probe().
The output is not changed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1441368963-11565-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu