Implements the DP adaptation specific HDCP2.2 functions.
These functions perform the DPCD read and write for communicating the
HDCP2.2 auth message back and forth.
v2:
wait for cp_irq is merged with this patch. Rebased.
v3:
wait_queue is used for wait for cp_irq [Chris Wilson]
v4:
Style fixed.
%s/PARING/PAIRING
Few style fixes [Uma]
v5:
Lookup table for DP HDCP2.2 msg details [Daniel].
Extra lines are removed.
v6: Rebased.
v7:
Fixed some regression introduced at v5. [Ankit]
Macro HDCP_2_2_RX_CAPS_VERSION_VAL is reused [Uma]
Converted a function to inline [Uma]
%s/uintxx_t/uxx
v8:
Error due to the sinks are reported as DEBUG logs.
Adjust to the new mei interface.
v9:
ARRAY_SIZE for no of array members [Jon & Daniel]
return of the wait_for_cp_irq is made as void [Daniel]
Wait for HDCP2.2 msg is done based on polling the reg bit than
CP_IRQ based. [Daniel]
hdcp adaptation is added as a const in the hdcp_shim [Daniel]
v10:
config_stream_type is redefined [Daniel]
DP Errata specific defines are moved into intel_dp.c.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ankit K Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-14-git-send-email-ramalingam.c@intel.com
When repeater notifies a downstream topology change, this patch
reauthenticate the repeater alone without disabling the hdcp
encryption. If that fails then complete reauthentication is executed.
v2:
Rebased.
v3:
Typo in commit msg is fixed [Uma]
v4:
Rebased as part of patch reordering.
Minor style fixes.
v5:
Rebased.
v6:
Rebased.
v7:
Errors due to sinks are reported as DEBUG logs.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-12-git-send-email-ramalingam.c@intel.com
Implements the link integrity check once in 500mSec.
Once encryption is enabled, an ongoing Link Integrity Check is
performed by the HDCP Receiver to check that cipher synchronization
is maintained between the HDCP Transmitter and the HDCP Receiver.
On the detection of synchronization lost, the HDCP Receiver must assert
the corresponding bits of the RxStatus register. The Transmitter polls
the RxStatus register and it may initiate re-authentication.
v2:
Rebased.
v3:
enum check_link_response is used check the link status [Uma]
v4:
Rebased as part of patch reordering.
v5:
Required members of intel_hdcp is defined [Sean Paul]
v6:
hdcp2_check_link is cancelled at required places.
v7:
Rebased for the component i/f changes.
Errors due to the sinks are reported as DEBUG logs.
v8:
hdcp_check_work is used for both hdcp1 and hdcp2 check_link [Daniel]
hdcp2.2 encryption status check is put under WARN_ON [Daniel]
drm_hdcp.h changes are moved into separate patch [Daniel]
v9:
enum check_link_status is defined at intel_drv.h [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-11-git-send-email-ramalingam.c@intel.com
Implements the HDCP2.2 repeaters authentication steps such as verifying
the downstream topology and sending stream management information.
v2: Rebased.
v3:
-EINVAL is returned for topology error and rollover scenario.
Endianness conversion func from drm_hdcp.h is used [Uma]
v4:
Rebased as part of patches reordering.
Defined the mei service functions [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
v6:
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new mei interface.
style issue fixed.
v8:
drm_hdcp.h change is moved into separate patch [Daniel]
v9:
%s/__swab16/cpu_to_be16. [Tomas]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-9-git-send-email-ramalingam.c@intel.com
Implements HDCP2.2 authentication for hdcp2.2 receivers, with
following steps:
Authentication and Key exchange (AKE).
Locality Check (LC).
Session Key Exchange(SKE).
DP Errata for stream type configuration for receivers.
At AKE, the HDCP Receiver’s public key certificate is verified by the
HDCP Transmitter. A Master Key k m is exchanged.
At LC, the HDCP Transmitter enforces locality on the content by
requiring that the Round Trip Time (RTT) between a pair of messages
is not more than 20 ms.
At SKE, The HDCP Transmitter exchanges Session Key ks with
the HDCP Receiver.
In DP HDCP2.2 encryption and decryption logics use the stream type as
one of the parameter. So Before enabling the Encryption DP HDCP2.2
receiver needs to be communicated with stream type. This is added to
spec as ERRATA.
This generic implementation is complete only with the hdcp2 specific
functions defined at hdcp_shim.
v2: Rebased.
v3:
%s/PARING/PAIRING
Coding style fixing [Uma]
v4:
Rebased as part of patch reordering.
Defined the functions for mei services. [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Required intel_hdcp members are defined [Sean Paul]
v6:
Typo of cipher is Fixed [Uma]
%s/uintxx_t/uxx
Check for comp_master is removed.
v7:
Adjust to the new interface.
Avoid using bool structure members. [Tomas]
v8: Rebased.
v9:
bool is used in struct intel_hdcp [Daniel]
config_stream_type is redesigned [Daniel]
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-8-git-send-email-ramalingam.c@intel.com
Considering that HDCP2.2 is more secure than HDCP1.4, When a setup
supports HDCP2.2 and HDCP1.4, HDCP2.2 will be enabled.
When HDCP2.2 enabling fails and HDCP1.4 is supported, HDCP1.4 is
enabled.
This change implements a sequence of enabling and disabling of
HDCP2.2 authentication and HDCP2.2 port encryption.
v2:
Included few optimization suggestions [Chris Wilson]
Commit message is updated as per the rebased version.
intel_wait_for_register is used instead of wait_for. [Chris Wilson]
v3:
Extra comment added and Style issue fixed [Uma]
v4:
Rebased as part of patch reordering.
HDCP2 encryption status is tracked.
HW state check is moved into WARN_ON [Daniel]
v5:
Redefined the mei service functions as per comp redesign.
Merged patches related to hdcp2.2 enabling and disabling [Sean Paul].
Required shim functionality is defined [Sean Paul]
v6:
Return values are handles [Uma]
Realigned the code.
Check for comp_master is removed.
v7:
HDCP2.2 is attempted only if mei interface is up.
Adjust to the new interface
Avoid bool usage in struct [Tomas]
v8:
mei_binded status check is removed.
%s/hdcp2_in_use/hdcp2_encrypted
v9:
bool is used in struct intel_hdcp. [Daniel]
v10:
panel is replaced with sink [Uma]
Mei interface decided the hdcp2_capability.
WARN_ON if hdcp_enable is called when hdcp state is ENABLED.
Reviewed-by Uma.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-7-git-send-email-ramalingam.c@intel.com
"hdcp_encrypted" flag is defined to denote the HDCP1.4 encryption status.
This SW tracking is used to determine the need for real hdcp1.4 disable
and hdcp_check_link upon CP_IRQ.
On CP_IRQ we filter the CP_IRQ related to the states like Link failure
and reauthentication req etc and handle them in hdcp_check_link.
CP_IRQ corresponding to the authentication msg availability are ignored.
WARN_ON is added for the abrupt stop of HDCP encryption of a port.
v2:
bool is used in struct for the cleaner coding. [Daniel]
check_link work_fn is scheduled for cp_irq handling [Daniel]
v3:
rebased.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-6-git-send-email-ramalingam.c@intel.com
Defining the mei-i915 interface functions and initialization of
the interface.
v2:
Adjust to the new interface changes. [Tomas]
Added further debug logs for the failures at MEI i/f.
port in hdcp_port data is equipped to handle -ve values.
v3:
mei comp is matched for global i915 comp master. [Daniel]
In hdcp_shim hdcp_protocol() is replaced with const variable. [Daniel]
mei wrappers are adjusted as per the i/f change [Daniel]
v4:
port initialization is done only at hdcp2_init only [Danvet]
v5:
I915 registers a subcomponent to be matched with mei_hdcp [Daniel]
v6:
HDCP_disable for all connectors incase of comp_unbind.
Tear down HDCP comp interface at i915_unload [Daniel]
v7:
Component init and fini are moved out of connector ops [Daniel]
hdcp_disable is not called from unbind. [Daniel]
v8:
subcomponent name is dropped as it is already merged.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [v11]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-5-git-send-email-ramalingam.c@intel.com
Add the HDCP2.2 initialization to the existing HDCP1.4 stack.
v2:
mei interface handle is protected with mutex. [Chris Wilson]
v3:
Notifiers are used for the mei interface state.
v4:
Poll for mei client device state
Error msg for out of mem [Uma]
Inline req for init function removed [Uma]
v5:
Rebase as Part of reordering.
Component is used for the I915 and MEI_HDCP interface [Daniel]
v6:
HDCP2.2 uses the I915 component master to communicate with mei_hdcp
- [Daniel]
Required HDCP2.2 variables defined [Sean Paul]
v7:
intel_hdcp2.2_init returns void [Uma]
Realigning the codes.
v8:
Avoid using bool structure members.
MEI interface related changes are moved into separate patch.
Commit msg is updated accordingly.
intel_hdcp_exit is defined and used from i915_unload
v9:
Movement of the hdcp_check_link is moved to new patch [Daniel]
intel_hdcp2_exit is removed as mei_comp will be unbind in i915_unload.
v10:
bool is used in struct to make coding simpler. [Daniel]
hdmi hdcp init is placed correctly after encoder attachment.
v11:
hdcp2_capability check is moved into hdcp.c [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-4-git-send-email-ramalingam.c@intel.com
All HDCP1.4 routines are gathered together, followed by the generic
functions those can be extended for HDCP2.2 too.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550338640-17470-2-git-send-email-ramalingam.c@intel.com
At a few points in our uABI, we check to see if the driver is wedged and
report -EIO back to the user in that case. However, as we perform the
check and reset asynchronously (where once before they were both
serialised by the struct_mutex), we may instead see the temporary wedging
used to cancel inflight rendering to avoid a deadlock during reset
(caused by either us timing out in our reset handler,
i915_wedge_on_timeout or with malice aforethought in intel_reset_prepare
for a stuck modeset). If we suspect this is the case, that is we see a
wedged driver *and* reset in progress, then wait until the reset is
resolved before reporting upon the wedged status.
v2: might_sleep() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109580
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220145637.23503-1-chris@chris-wilson.co.uk
If we skipped all the connectors that were not part of a tile, we would
leave conn_seq=0 and conn_configured=0, convincing ourselves that we
had stagnated in our configuration attempts. Avoid this situation by
starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
connectors to configure.
Fixes: 754a76591b ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v3.19+
(cherry picked from commit d9b308b1f8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Also contains the prep work in the component helpers plus adjustements
for the snd-hda/i915 component interface.
Plus one small static inline in the drm_hdcp.h header that both i915
and mei_hdcp will need.
-----BEGIN PGP SIGNATURE-----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=+00+
-----END PGP SIGNATURE-----
Merge tag 'topic/mei-hdcp-2019-02-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued
Prep patches + headers for the mei-hdcp/i915 component interfaces
Also contains the prep work in the component helpers plus adjustements
for the snd-hda/i915 component interface.
Plus one small static inline in the drm_hdcp.h header that both i915
and mei_hdcp will need.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219071619.GA11016@phenom.ffwll.local
This add an ioctl to migrate a range of process address space to the
device memory. On platform without cache coherent bus (x86, ARM, ...)
this means that CPU can not access that range directly, instead CPU
will fault which will migrate the memory back to system memory.
This is behind a staging flag so that we can evolve the API.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Device memory can be use in SVM, in which case we do not have any of
the existing buffer object. This commit add infrastructure to allow
use of device memory without nouveau_bo. Again this is a temporary
solution until a rework of GPU memory management.
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
This uses HMM to mirror a process' CPU page tables into a channel's page
tables, and keep them synchronised so that both the CPU and GPU are able
to access the same memory at the same virtual address.
While this code also supports Volta/Turing, it's only enabled for Pascal
GPUs currently due to channel recovery being unreliable right now on the
later GPUs.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For a channel to make use of SVM features, it requires a different GPU MMU
configuration than we would normally use, which is not desirable to switch
to unless a client is actively going to use SVM.
In order to supporting SVM without more extensive changes to the userspace
interfaces, the SVM_INIT ioctl needs to replace the previous configuration
safely.
The only way we can currently do this safely, accounting for some unlikely
failure conditions, is to allocate the new VMM without destroying the last
one, and prioritising the SVM-enabled configuration in the code that cares.
This will get cleaned up again further down the track.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some GPU units are capable of supporting "replayable" page faults, where
the execution unit will wait for SW to fixup GPU page tables rather than
triggering a channel-fatal fault.
This feature isn't useful (it's harmful, even) unless something like HMM
is being used to manage events appearing in the replayable fault buffer,
so, it's disabled by default.
This commit allows a client to request it be enabled.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Host methods exist to do at least some of what we need, but we are not
currently pushing replay/cancels through a channel like UVM does as it's
not clear whether it's necessary in our case (UVM also updates PTEs with
the GPU).
UVM also pushes a software method for fault cancels on Pascal, seemingly
because the host methods don't appear to be sufficient. If/when we want
to push the replay/cancel on the GPU, we can re-purpose the cancellation
code here to implement that swmthd.
Keep it simple for now, until we figure out exactly what we need here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This provides a somewhat more direct method of manipulating the GPU page
tables, which will be required to support SVM.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will be used to support a privileged client providing PTEs directly,
without a memory object to use as a reference.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
NVKM is currently responsible for managing the allocation of a client's
GPU address-space, but there's various use-cases (ie. HMM address-space
mirroring) where giving a client more direct control is desirable.
This commit allows for a VMM to be created where the area allocated for
NVKM is limited to a client-specified window, the remainder of address-
space is controlled directly by the client.
Leaving a window is necessary to support various internal requirements,
but also to support existing allocation interfaces as not all of the HW
is capable of working with a HMM allocation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are a few statements that are indented incorrectly. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There's no need to avoid using copy engines if gr init fails for some
reason (usually missing FW, or incomplete bring-up).
It's not terribly useful for an end-user, but it'll slightly speed up
suspend/resume when saving fb contents, and allow for host/ce code to
be validated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some of the pre-NV50 depends on SW methods to implement synchronisation
for page flips, and we want to move this setup out of common code, thus
we require the channel to have been allocation before display init.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As I currently understand it, this is related to features we have no
support for as of yet.
In theory, this change should be a noop, just without the warning.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Turing has its SEC2 instance in an alternate location, and this avoids
needing to duplicate the code here for it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Will be using this in upcoming changes to avoid the need for entirely
new subdevs to deal with Turing register moves.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.
Detected by CoverityScan, CID#1460507 ("Missing break in switch")
Fixes: 359088d5b8 ("drm/nouveau: remove trivial cases of nvxx_device() usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/gpu/drm/nouveau/nouveau_bo.c:1434:53: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is much louder then we want. VCPI allocation failures are quite
normal, since they will happen if any part of the modesetting process is
interrupted by removing the DP MST topology in question. So just print a
debugging message on VCPI failures instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: f479c0ba4a ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef ("drm/nouveau/pmu: rename from pwr (no binary change)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b615 ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Don't populate the array vsoff on the stack but instead make it
static. Makes the object code smaller by 67 bytes:
Before:
text data bss dec hex filename
5753 112 0 5865 16e9 .../nouveau/nvkm/subdev/bios/dp.o
After:
text data bss dec hex filename
5622 176 0 5798 16a6 .../nouveau/nvkm/subdev/bios/dp.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We still need to set bulk_movable to false when new BOs are added or removed.
v2: also set it to false on removal
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: StDenis, Tom <Tom.StDenis@amd.com>
Tested-by: Przemek Socha <soprwa@gmail.com>
Reviewed-by: Zhou, David(ChunMing) <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We only need to set this to false now when BOs are removed from the LRU.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
Notice that, in this case, variable table_size is not necessary, hence
it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
Notice that, in this case, variable table_size is not necessary, hence
it is removed.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current periodic interrupt start point calc in optc
is not clear.
[How]
1. DM convert delta time to lines number and dc will calculate the
start position as per lines number and interrupt type.
2. hwss calculates the start point as per line offset.
3. optc programs vertical interrupts register as per start point
and interrupt source.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The stream->mode_changed flag can persist in the following sequence
of atomic commits:
Commit 1:
Enable CRTC0 (mode_changed = true), Enable CRTC1 (mode_changed = true)
Commit 2:
Disable CRTC1 (mode_changed = false)
In this sequence we want to keep the exiting CRTC0 but it's not in the
atomic state for the commit since it hasn't been modified. In this case
the stream->mode_changed flag persists as true and we don't re-program
the planes for the existing stream.
[How]
The flag needs to be cleared and it makes the most sense to do it within
DC after the state has been committed. Nothing following dc_commit_state
should think that the stream's mode has changed.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Cursor updates used to happen after vblank/flip/stream updates before
the stream update refactor. They now happen before stream updates
which means that they're not going to be synced with fb changes
and that they're going to programmed for pipes that we're disabling
within the same commit.
[How]
Move them after stream updates.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Whenever a stream or plane is added or removed from the context the
pointer will change from old to new. We set lock and validation
needed in these cases. But not all of these cases match update_type
from dm_determine_update_type_for_commit - an example being overlay
plane updates.
There are warnings for a few of these cases that should be fixed.
[How]
We can closer align to DC (and lock_and_validation_needed) by
comparing stream and plane pointers.
Since the old stream/old plane state is never freed until sometime
after the commit tail work finishes we are guaranteed to never get
back the same block of memory when we remove and create a stream or
plane state in the same commit.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This format isn't supported in DC and some IGT tests fail since we
expose support for it.
[How]
Remove it.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If a commit updates an overlay plane via the legacy plane IOCTL
then the only plane in the state will be the overlay plane.
Overlay planes need to be added first to the DC context, but in the
scenario above the plane will be added last. This will result in wrong
z-order during rendering.
[How]
If any non-cursor plane has been updated then the rest of the
non-cursor planes should be added to the CRTC state.
The cursor plane doesn't need to be included for stream updates and
locking it will cause performance issues. It should be ignored.
DC requires that the surface count passed during stream updates
be the number of surfaces currently on the stream to enable fast
updates. This previously wasn't the case without this patch, so this
also allows this optimization to occur.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Tony Cheng <Tony.Cheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previously, a change removed code that would send a pipe set command
to dmcu each time the backlight was set, as it was thought to be
superfluous. However, it is possible for the backlight to be set
before a valid pipe has been set, which causes DMCU to hang after a
DPMS restore on some systems.
[How]
Send a pipe set command to DMCU prior to setting the backlight.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain tests fail after a fresh reboot. This is caused by writing to
registers prior to ungating the stream we're trying to program.
[How]
Make sure the stream is ungated before writing to its registers.
This also enables power-gating plane resources before init_hw
initializes them.
Additionally, this does some refactoring to move gating/ungating
from enable/disable_plane functions to where stream resources are
enabled/disabled.
Signed-off-by: Gary Kattan <gary.kattan@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We are currently losing precision when we convert from
16 bit --> 8 bit --> 16 bit.
[How]
We shouldn't down convert unnecessarily and lose precision.
Keep values at 16 bit and use directly.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want boot to desktop to be seamless
[How]
During init pipes, avoid touching the pipes where GOP has already
enabled the HW to the state we want.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When stream is blanked, pipe set command is sent to dmcu to notify it
that the abm pipe is disabled. When stream is unblanked, no notification is
made to dmcu that the abm pipe has been enabled, resulting in abm not
being enabled in the firmware.
[How]
When stream is unblanked, send a pipe set command to dmcu.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original change caused a regression, so revert it until the new fix
is ready.
BUG: https://bugs.freedesktop.org/show_bug.cgi?id=109650
This reverts commit 764c85fef41722db0f21558c6c2fb38bee172d19.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 9006c6bd9059cb9807fa863bafc1d776222cb61b.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add missing break statement in order to prevent the code from falling
through to case CB_TARGET_MASK.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: dd220a00e8 ("drm/radeon/kms: add support for streamout v7")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The visual corruption due to low display clock value.
Observed on Carrizo 4K@60Hz.
[How]
There was earlier patch for dce_update_clocks:
Adding +15% workaround also to to dce11_update_clocks
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_dp_mst_topology_mgr_suspend() is added into the new reboot
sequence, which disables the UP request at the beginning.
Therefore sideband messages are blocked.
[How]
Finish MST sideband message transaction before UP request is
suppressed.
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
According to hardware engineer, WRITE_BURST_LENGTH [9:8] in register
SDMA0_CHICKEN_BITS need to change to 3 for better performance
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on a similar patch from Rafael for radeon.
When using ATPX to control dGPU power, the state is not retained
across suspend and resume cycles by default. This can probably
be loosened for Hybrid Graphics (_PR3) laptops where I think the
state is properly retained.
Fixes: c62ec4610c ("PM / core: Fix direct_complete handling for devices with no callbacks")
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver
and the direct-complete optimization is used for the radeon device
during system-wide suspend, the system doesn't resume.
Preventing direct-complete from being used with the radeon device by
setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem
go away, which indicates that direct-complete is not safe for the
radeon driver in general and should not be used with it (at least
for now).
This fixes a regression introduced by commit c62ec4610c
("PM / core: Fix direct_complete handling for devices with no
callbacks") which allowed direct-complete to be applied to
devices without PM callbacks (again) which in turn unlocked
direct-complete for radeon on HP ProBook 4540s.
Fixes: c62ec4610c ("PM / core: Fix direct_complete handling for devices with no callbacks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201519
Reported-by: Ярослав Семченко <ukrkyi@gmail.com>
Tested-by: Ярослав Семченко <ukrkyi@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
(Resend since there was a compile error that I forgot to commit before sending)
If there is a error while doing a copy_from_user() for MSM_INFO_SET_NAME
make sure to truncate the object name so that there isn't a chance that
we'll have random data in the string.
This is on top of [1] reported and fixed by Dan Carpenter.
[1] https://patchwork.freedesktop.org/series/56656/
Fixes: f05c83e774 ("drm/msm: add uapi to get/set debug name")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
The copy_to/from_user() functions return the number of bytes remaining
to be copied but we should return -EFAULT to the user.
Fixes: f05c83e774 ("drm/msm: add uapi to get/set debug name")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Currently, we accumulate each time a context hangs the GPU, offset
against the number of requests it submits, and if that score exceeds a
certain threshold, we ban that context from submitting any more requests
(cancelling any work in flight). In contrast, we use a simple timer on
the file, that if we see more than a 9 hangs faster than 60s apart in
total across all of its contexts, we will ban the client from creating
any more contexts. This leads to a confusing situation where the file
may be banned before the context, so lets use a simple timer scheme for
each.
If the context submits 3 hanging requests within a 120s period, declare
it forbidden to ever send more requests.
This has the advantage of not being easy to repair by simply sending
empty requests, but has the disadvantage that if the context is idle
then it is forgiven. However, if the context is idle, it is not
disrupting the system, but a hog can evade the request counting and
cause much more severe disruption to the system.
Updating ban_score from request retirement is dubious as the retirement
is purposely not in sync with request submission (i.e. we try and batch
retirement to reduce overhead and avoid latency on submission), which
leads to surprising situations where we can forgive a hang immediately
due to a backlog of requests from before the hang being retired
afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-2-chris@chris-wilson.co.uk
CI still reports the occasional multi-second delay for resets, in
particular along the wedge+recovery paths. As the likely, and unbounded,
delay here is from sync_rcu, use the expedited variant instead.
Testcase: igt/gem_eio/unwedge-stress
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-7-chris@chris-wilson.co.uk
The stack usage exceeded 1024 bytes prompting warnings on conservative
setups, so move the temporary allocation for HW readback onto the heap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190219122215.8941-1-chris@chris-wilson.co.uk
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We can directly calculate sdma doorbell indexes in the process doorbell
pages through the doorbell_index structure in amdgpu_device, so no need
to cache them in kgd2kfd_shared_resources any more. This alleviates the
adaptation needs when new SDMA configurations are introduced.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reserved doorbells for SDMA IH and VCN were not properly masked out
when allocating doorbells for CP user queues. This patch fixed that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used to inform KFD the doorbell range not usable for CP.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The similar definitions should be consecutive.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At least on i965g and i965gm, performing a device reset clobbers the IER
resulting in loss of interrupts thereafter. So, run the irq_postinstall
hook to restore them.
v2: Ville pointed out that he already attempted to solve this problem by
reinstalling the interrupts in intel_reset_finish() (part of the display
handling around reset). However, reinstalling the irq clobbers the
i915->irq_mask which we need for handling MI_USER_INTERRUPTS, and does
so too late to handle any interrupts generated from resuming the rings.
The simple solution to both is to pull the interrupt reenabling from
afterwards to around the device reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218153106.16768-1-chris@chris-wilson.co.uk
igt_ctx_sseu was caught using bannable contexts, and in the course of
resetting rapidly to run its test, was banned. Don't let ourselves ban
the test!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218145051.18981-1-chris@chris-wilson.co.uk
Some clients, such as mesa, may only emit minimal incremental batches
that rely on the logical context state from previous batches. They know
that recovery is impossible after a hang as their required GPU state is
lost, and that each in flight and subsequent batch will hang (resetting
the context image back to default perpetuating the problem).
To avoid getting into the state in the first place, we can allow clients
to opt out of automatic recovery and elect to ban any guilty context
following a hang. This prevents the continual stream of hangs and allows
the client to recreate their context and rebuild the state from scratch.
v2: Prefer calling it recoverable rather than unrecoverable.
References: https://lists.freedesktop.org/archives/mesa-dev/2019-February/215431.html
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org> # for mesa
Link: https://patchwork.freedesktop.org/patch/msgid/20190218105821.17293-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This struct appears quite large and pushes our stack frame over
1024 bytes -- too high for conservative setups. So move the mock_ggtt
struct to the heap.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190217202518.24730-1-chris@chris-wilson.co.uk
If we skipped all the connectors that were not part of a tile, we would
leave conn_seq=0 and conn_configured=0, convincing ourselves that we
had stagnated in our configuration attempts. Avoid this situation by
starting conn_seq=ALL_CONNECTORS, and repeating until we find no more
connectors to configure.
Fixes: 754a76591b ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215123019.32283-1-chris@chris-wilson.co.uk
Cc: <stable@vger.kernel.org> # v3.19+
Add tracepoints for pipe enable/disable. We'll include the
frame/scanline counters for all pipes in these tracepoints to
help in diagnosing underruns and whatnot when enabling/disabling
pipes in parallel with plane updates/flips on another pipe.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a tracepoint for pipe crc. Makes life much simpler when staring at
traces when hunting for fifo underruns and other issues which cause
corrupted frames. We'll add the tracepoint before filtering out any
potentially bogus crcs during modeset (should actually verify if that
filtering is even correct anymore...)
v2: s/crcs[5]/*crcs/ in the function argument because something
in the macros wants to do sizeof(crcs) and gcc likes to
warn us it's not an actual array so the size may not be
as expected. The silly bugger even does that for 'crcs[]'
causing us to lose any helpful syntactic hint that we
are in fact dealing with an array (kbuild test robot)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206204910.13965-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we no longer need to hold struct_mutex to perform a global device
reset, don't do so for igt_reset_wedge().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190215102732.15520-2-chris@chris-wilson.co.uk
For the reusability of the enum port in other driver modules
(like mei_hdcp), enum port definition is moved from I915 local header
intel_display.h to drm/i915_drm.h
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fix subject prefix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1550219730-17734-3-git-send-email-ramalingam.c@intel.com
Carried over from radeon, but no longer used.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Given a master fd we can then override the priority of the context
in another fd.
Using these overrides was recommended by Christian instead of trying
to submit from a master fd, and I am adding a way to override a
single context instead of the entire process so we can only upgrade
a single Vulkan queue and not effectively the entire process.
Reused the flags field as it was checked to be 0 anyways, so nothing
used it. This is source-incompatible (due to the name change), but
ABI compatible.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we interpret the file private data as drm & amdgpu data
while it might not be, possibly allowing one to get memory corruption.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I don't see another way to figure out if a ring is initialized if
the hardware block might not be initialized.
Entities have been fixed up to handle num_rqs = 0.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some blocks in amdgpu can have 0 rqs.
Job creation already fails with -ENOENT when entity->rq is NULL,
so jobs cannot be pushed. Without a rq there is no scheduler to
pop jobs, and rq selection already does the right thing with a
list of length 0.
So the operations we need to fix are:
- Creation, do not set rq to rq_list[0] if the list can have length 0.
- Do not flush any jobs when there is no rq.
- On entity destruction handle the rq = NULL case.
- on set_priority, do not try to change the rq if it is NULL.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As we currently do not check on submission whether the context is banned
in a timely manner it is possible for some requests to escape
cancellation after their parent context is banned. By moving the ban
into the request submission under the engine->timeline.lock, we
serialise it with the reset and setting of the context ban.
References: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213182737.12695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Currently, we only try to reset a live engine for checking the whitelist
retention across a per-engine reset. For safety, it appears we need to
prime the system with a hanging spinner before performing a full-device
reset. (Figuring out the root cause behind the instability with handling
a reset during a no-op request is a challenge for another test, the
whitelist test has its own purpose.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109626
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213224805.32021-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Passing an object_count of sufficient size will make
object_count * 4 wrap around to be very small, then a later function
will happily iterate off the end of the object_ids array. Using
array_size() will saturate at SIZE_MAX, the kmalloc() will fail and
we'll return an -ENOMEM to the norty userspace.
Fixes: 62884cd386 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently we try to stop the engine by programming the ring registers to
be disabled before we perform the reset. Sometimes, we see the context
image also have invalid ring registers, which one presumes may be
actually caused by us doing so. Lets risk not doing programming the
ring to zero on the first attempt to avoid preserving that corruption
into the context image, leaving the w/a in place for subsequent
reset attempts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213232047.8486-1-chris@chris-wilson.co.uk
drm/i915 is tracking all wakeref owners with a cookie in order to
identify leaks. To that end, each rpm acquisition ops->get_power is
assigned a cookie which should be passed to ops->put_power to signify
its release (and removal from the list of wakeref owners). As snd/hda is
already using a bool to track current status of display_power extending
that to an unsigned long to hold the boolean cookie is a trivial
extension, and will quell all doubt that snd/hda is the cause of the
device runtime pm leaks.
v2: Keep using the power abstraction for local wakeref tracking.
v3: BUILD_BUG_ON impedance mismatch
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213152109.16997-1-chris@chris-wilson.co.uk
The new workaround from the hw team involves leaving WM1
still disabled but programming the blocks value
identically to WM0, and we also need to set the "ignore
lines watermark" bit for WM1.
v2: Fix commit message wording a bit
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213165424.22904-3-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
The prepare_fb call always happens on new_plane_state.
The drm_atomic_helper_cleanup_planes checks to see if
plane state pointer has changed when deciding to call cleanup_fb on
either the new_plane_state or the old_plane_state.
For a non-async atomic commit the state pointer is swapped, so this
helper calls prepare_fb on the new_plane_state and cleanup_fb on the
old_plane_state. This makes sense, since we want to prepare the
framebuffer we are going to use and cleanup the the framebuffer we are
no longer using.
For the async atomic update helpers this differs. The async atomic
update helpers perform in-place updates on the existing state. They call
drm_atomic_helper_cleanup_planes but the state pointer is not swapped.
This means that prepare_fb is called on the new_plane_state and
cleanup_fb is called on the new_plane_state (not the old).
In the case where old_plane_state->fb == new_plane_state->fb then
there should be no behavioral difference between an async update
and a non-async commit. But there are issues that arise when
old_plane_state->fb != new_plane_state->fb.
The first is that the new_plane_state->fb is immediately cleaned up
after it has been prepared, so we're using a fb that we shouldn't
be.
The second occurs during a sequence of async atomic updates and
non-async regular atomic commits. Suppose there are two framebuffers
being interleaved in a double-buffering scenario, fb1 and fb2:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2
We call cleanup_fb on fb2 twice in this example scenario, and any
further use will result in use-after-free.
The simple fix to this problem is to block framebuffer changes
in the drm_atomic_helper_async_check function for now.
v2: Move check by itself, add a FIXME (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Fixes: fef9df8b59 ("drm/atomic: initial support for asynchronous plane update")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/275364/
Organize MG PHY macro definitions semantically based on dword, lane and
port (in this order).
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-3-aditya.swarup@intel.com
Organize combo PHY DDI macro definitions semantically based on dword,
lane and port (in this order).
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-2-aditya.swarup@intel.com
This prevents us from accessing extended registers in tools like
umr. The register access functions already check if the offset
is beyond the BAR size and use the indirect accessors with locking
so this is safe.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are several statements that are incorrectly indented. Fix these.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Missing firmware declaration caused firmware requirement to
not be noted by the module and may cause firmware to not
be available in initrd.
Fixes: bc4b539e38 "drm/amdgpu: remove old CI DPM implementation"
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ring hang happens amdgpu_dm_commit_planes during flip is holding
the BO reserved and then stack waiting for fences to signal in
reservation_object_wait_timeout_rcu (which won't signal because there
was a hnag). Then when we try to shutdown display block during reset
recovery from drm_atomic_helper_suspend we also try to reserve the BO
from dm_plane_helper_cleanup_fb ending in deadlock.
Also remove useless WARN_ON
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They are no longer used, so delete them to avoid confusion.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CP_RB_DOORBELL_RANGE_LOWER/UPPER and CP_MEC_DOORBELL_RANGE_LOWER/UPPER
are used for waking up an idle scheduler and for power gating support.
Usually the first few doorbells in pci doorbell bar are used for RB
and all leftover for MEC. This patch fixes the incorrect settings.
Theoretically, gfx ring doorbells should come before all MEC doorbells
to be consistent with the design. However, since the doorbell
allocations are agreed by all and we are not free to change them, also
considering the kernel MEC ring doorbells which are before gfx ring
doorbells are not used often, we compromise by leaving the doorbell
allocations unchanged.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temporarily removing eviction fences to avoid triggering them by
accident is no longer necessary due to the fence_owner logic in
amdgpu_sync_resv.
As a result the ef_list usage of amdgpu_amdkfd_remove_eviction_fence
and amdgpu_amdkfd_add_eviction_fence are no longer needed.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use FENCE_OWNER_KFD to synchronize PT/PD initialization and clearing
of page table entries. This avoids triggering KFD eviction fences on
the PD reservation objects of compute VMs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fence_owner logic in amdgpu_sync_wait will allow waiting without
having to temporarily remove eviction fences.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Creates a temporary sync object to wait for the BO reservation. This
generalizes amdgpu_vm_wait_pd.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sriov's gpu_recover inside xgpu_ai_mailbox_flr_work would cause duplicate recover in TDR.
TDR's gpu_recover would be triggered by amdgpu_job_timedout,
that could avoid vk-cts failure by unexpected recover.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the callback and call the dispatcher directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases (in mesa and applications) where one would open the
primary node without properly authenticating the client.
Sometimes we don't check if the authentication succeeds, but there's
also cases we simply forget to do it.
The former was a case for Mesa where it did not not check the return
value of drmGetMagic() [1]. That was fixed recently although, there's
the question of older drivers or other apps that exbibit this behaviour.
While omitting the call results in issues as seen in [2] and [3].
In the libva case, libva itself doesn't authenticate the DRM client and
the vaGetDisplayDRM documentation doesn't mention if the app should
either.
As of today, the official vainfo utility doesn't authenticate.
To workaround issues like these, some users resort to running their apps
under sudo. Which admittedly isn't always a good idea.
Since any DRIVER_RENDER driver has sufficient isolation between clients,
we can use that, for unauthenticated [primary node] ioctls that require
DRM_AUTH. But only if the respective ioctl is tagged as DRM_RENDER_ALLOW.
v2:
- Rework/simplify if check (Daniel V)
- Add examples to commit messages, elaborate. (Daniel V)
v3:
- Use single unlikely (Daniel V)
[1] 2bc1f5c2e7/src/egl/drivers/dri2/platform_wayland.c (L1136)
[2] https://lists.freedesktop.org/archives/libva/2016-July/004185.html
[3] https://gitlab.freedesktop.org/mesa/kmscube/issues/1
Testcase: igt/core_unauth_vs_render
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114085408.15933-2-emil.l.velikov@gmail.com
Currently only an authenticated master can authenticate another client.
In practise the client can only be master if CAP_SYS_ADMIN is present,
although having the CAP also sets the client as authenticated.
Thus DRM_AUTH in AUTH_MAGIC's "DRM_AUTH | DRM_MASTER" is superfluous.
Notices while working on IGT tests.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114084305.15141-1-emil.l.velikov@gmail.com
As there are no upstream drivers for VED or ISP let's just
assert that they are power gated. Otherwise they would
prevent s0ix entry.
For ISP this is only relevant when it is not exposed as a
PCI device and instead is a subordinate of the gunit. When
exposed as a PCI device it will be handled by the
atomisp2_pm driver.
On my VLV FFRD8 board the firmware power gates both of these
by default. Let's assume that is always the case and just
WARN if we ever encounter something different.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129175504.3630-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Don't warn or fail if it's missing.
v2: handle xgmi case more gracefully.
v3: handle older kernels properly
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As time goes by, usage of generic ioctls such as drm_syncobj and
sync_file are on the increase bypassing i915-specific ioctls like
GEM_WAIT. Currently, we only apply waitboosting to our driver ioctls as
we track the file/client and account the waitboosting to them. However,
since commit 7b92c1bd05 ("drm/i915: Avoid keeping waitboost active for
signaling threads"), we no longer have been applying the client
ratelimiting on waitboosts and so that information has only been used
for debug tracking.
Push the application of waitboosting down to the common
i915_request_wait, and apply it to all foreign fence waits as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190213092504.25709-1-chris@chris-wilson.co.uk
Add the degamma and gamma lut sizes to gen11 capability
structure.
Note: Currently this doesn't account for the extended range gamma
entries and this will be addressed with new segmented gamma ABI
in a future patch.
v2: Reorder the patch as per Maarten's suggestion.
v3: Rebase
v4: Updated commit message with a note as per Matt's suggestion.
v5: No Change.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-6-git-send-email-uma.shankar@intel.com
GEN11+ onwards an output csc hardware block has been added.
This is after the pipe gamma block and is in addition to the
legacy pipe CSC block. Primary use case for this block is to
convert RGB to YUV in case sink supports YUV.
This patch adds supports for the same.
v2: This is added after splitting the existing ICL pipe CSC
handling. As per Matt's suggestion, made this to co-exist
with existing pipe CSC, wherein both can be enabled if a
certain usecase arises.
v3: Fixed an issue with co-existence of output csc and normal
pipe csc, spotted by Matt. Put the csc mode flag enabling to
color_check to align with atomic.
v4: Fixed macro alignment and checkpatch complaints wrt line over
100 characters limit.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-5-git-send-email-uma.shankar@intel.com
Add support for icl pipe degamma and gamma.
v2: Removed a POSTING_READ and corrected the Bit
Definition as per Maarten's comments.
v3: Addressed Matt's review comments. Removed rmw patterns
as suggested by Matt.
v4: Fixed Matt's review comments.
v5: Corrected macro alignment as per Jani Nikula's comments.
Addressed Ville and Matt's review comments.
v6: Merged ICL degamma handling with GLK and dropped ICL
degamma function as per Ville and Matt's comments.
v7: updated gamma_mode state with pre csc gammma and post
gamma enabling in intel_color_check to align with atomic.
v8: Addressed Maarten's review comments.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-3-git-send-email-uma.shankar@intel.com
Fixed the glk degamma lut programming which currently
was hard coding a linear lut all the time, making degamma
block of glk basically a pass through.
Currently degamma lut for glk is assigned as 0 in platform
configuration. Updated the same to 33 as per the hardware
capability. IGT tests for degamma were getting skipped due to
this, spotted by Swati.
ToDo: The current gamma/degamm lut ABI has just 16bit for each
color component. This is not enough for GLK+, since input
precision is increased to 3.16 which will need 19bit entries.
v2: Added Matt's RB.
v3: Changed uint32_t to u32.
v4: Fixed Maarten's review comment
Credits-to: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549893025-21837-2-git-send-email-uma.shankar@intel.com
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXGL3ZBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwDz3AP49Ldp9TuuS/bMHWcZrPXRjiWJO
9lRaWV3mKqMFsAQzswD9Gy0+eybyaPQqRvLXXxwuk7Jrh8or2TOyOqDVeoDC4Q8=
=zCye
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2019-02-12' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: plane, ldb, and ipu-v3 fixes
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1549990602.4800.11.camel@pengutronix.de
Use lockdep to warn before we wait indefinitely in case we may be
waiting indefinitely.
Suggested-by: Mika Kuoppala <mika.kuoppala@intel.com>
References: 2caffbf117 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190212130831.14425-2-chris@chris-wilson.co.uk
We cannot nest i915_reset_trylock() as the inner may wait for the
I915_RESET_BACKOFF which in turn is waiting upon sync_srcu who is
waiting for our outermost lock. As we take the reset srcu around the
fence update, we have to defer taking it in i915_gem_fault() until after
we acquire the pin on the fence to avoid nesting. This is a little ugly,
but still works. If a reset occurs between i915_vma_pin_fence() and the
second reset lock, the reset will restore the fence register back to the
pinned value before the reset lock allows us to proceed (our mmap won't
be revoked as we haven't yet marked it as being a userfault as that
requires us to hold the reset lock), so the pagefault is still
serialised with the revocation in reset.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109605
Fixes: 2caffbf117 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190212130831.14425-1-chris@chris-wilson.co.uk
Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.
Fix the error path while at it.
v2: Make relative vs. absolute conditional on the opregion version,
bumped for the purpose. Turned out there are machines relying on
absolute RVDA in the wild.
v3: Fix the version checks
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
(cherry picked from commit a0f52c3d35)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.
Add opregion version logging while at it.
v2: Fix the fix of the version check
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
(cherry picked from commit 98fdaaca95)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 26a11deea6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we're only dumping out the ddb allocation changes, let's do
the same for the watermarks. This should help with debugging underruns
and whatnot.
First I tried one line per plane per wm level, but that resulted in
an obnoxious amount of lines printed. So as a compromise I settled
on a four line format, each line containing a single watermark related
value (enable,lines,blocks,min_ddb_alloc) for all 8 levels (+trans wm).
It still produces quite a lot of output but I can't really see a way
around that because we simply have a lot of data to dump.
Let's also pimp the ddb debug to print the size of the allocations
too, not just their bounds. Makes it a bit easier to compare against
the watermarks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208200527.12844-1-ville.syrjala@linux.intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
While this is mainly only useful for ELSP[0], it is definitely useful to
know the current timeline seqno wrt to the queued set of requests for
that port, as this carries additional information above and beyond the
near-defunct global_seqno and global HWSP.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211131004.11634-1-chris@chris-wilson.co.uk
We impose upon ourselves a strict timeout for resets (to ensure forward
progress by use of a failsafe). Prefer to use the expedited
synchronisation function in this case to reduce the likelihood of a
spurious delay being treated as a deadlock.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211135040.1234-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We need to flush our srcu protecting resources about to be clobbered
by the reset, inside of our timer failsafe but outside of the
error->wedge_mutex, so that the failsafe can run in case the
synchronize_srcu() takes too long (hits a shrinker deadlock?).
Fixes: 72eb16df01 ("drm/i915: Serialise resets with wedging")
References: https://bugs.freedesktop.org/show_bug.cgi?id=109605
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190211135040.1234-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.
v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)
Fixes: 4e53840fdf ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
(cherry picked from commit b14c06ec02)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.
v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit b265a2a625)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.
Fix the error path while at it.
v2: Make relative vs. absolute conditional on the opregion version,
bumped for the purpose. Turned out there are machines relying on
absolute RVDA in the wild.
v3: Fix the version checks
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.
Add opregion version logging while at it.
v2: Fix the fix of the version check
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
If we allocate while iterating the rbtree of active nodes, we may hit
the shrinker and so retire the i915_active, reaping the rbtree. Modifying
the rbtree as we iterate is not good behaviour, so acquire the
i915_active first to keep the tree intact whenever we allocate.
Fixes: a42375af0a ("drm/i915: Release the active tracker tree upon idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208134704.23039-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
With drmP.h removed from drm_modeset_helper.h the build of
komeda filed as reported by linux-next
Add missing include files to fix build.
For the files touched group include files and sort them.
The fix was tested on a tree with drm-misc-next merged.
And the patch was also tested to work without drm-misc-next merged.
Build tested on arm + x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [linux-next]
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Wang <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208221324.27002-1-sam@ravnborg.org
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140409.15280-1-kraxel@redhat.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
-----BEGIN PGP SIGNATURE-----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=jS/6
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208144721.25830-1-thierry.reding@gmail.com
Add a warn to verify the hrtimer_forward_now return and changes
ret_overrun from int to u64 to match the return value provided by
hrtimer_forward_now.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206200813.d5w7gjpepoeeadiy@smtp.gmail.com
In the next patch, we add another user that wants to check whether
requests can be merge into a single HW execution, and in the future we
want to add more conditions under which requests from the same context
cannot be merge. In preparation, extract out can_merge_rq().
v2: Reorder tests to decide if we can continue filling ELSP and bonus
comments.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208235108.23127-1-chris@chris-wilson.co.uk
This patch adds appropriate kernel documentation for DRM DP helpers
used for enabling Display Stream compression functionality in
drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec
related structure definitions and helpers in drm_dsc.c and drm_dsc.h
Also add links between the functions and structures in the documentation.
v3:
* Fix the checkpatch warnings (Sean Paul)
v2:
* Add inline comments for longer structs (Daniel Vetter)
* Split the summary and description (Daniel Vetter)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206213148.21390-1-manasi.d.navare@intel.com
P010 is a planar 4:2:0 YUV with interleaved UV plane, 10 bits per
channel video format.
P012 is a planar 4:2:0 YUV 12 bits per channel
P016 is a planar 4:2:0 YUV with interleaved UV plane, 16 bits per
channel video format.
V3: Added P012 and fixed cpp for P010.
V4: format definition refined per review.
V5: Format comment block for each new pixel format.
V6: reversed Cb/Cr order in comments.
v7: reversed Cb/Cr order in comments of header files, remove
the wrong part of commit message.
V8: reversed V7 changes except commit message and rebased.
v9: used the new properties to describe those format and
rebased.
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109195710.28501-2-ayaka@soulik.info
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The entity->dependency can go away completely once we've called
drm_sched_entity_add_dependency_cb() (if the cb is called before we
get around to tracing). The tracepoint is more useful if we trace
every dependency instead of just ones that get callbacks installed,
anyway, so just do that.
Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with
"perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we haven't even begun executing the payload of the stalled request,
then we should not claim that its userspace context was guilty of
submitting a hanging batch.
v2: Check for context corruption before trying to restart.
v3: Preserve semaphores on skipping requests (need to keep the timelines
intact).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-7-chris@chris-wilson.co.uk
Since we use the debugfs to recover the device after modifying the
i915.reset parameter, we need to be sure that we apply the reset and not
piggy-back onto a concurrent one in order for the parameter to take
effect.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-5-chris@chris-wilson.co.uk
On wedging, we mark all executing requests as complete and all pending
requests completed as soon as they are ready. Before unwedging though we
wish to flush those pending requests prior to restoring default
execution, and so we must wait. Do so uninterruptibly as we do not provide
the EINTR gracefully back to userspace in this case but persists in
keeping the permanently wedged state without restarting the syscall.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-4-chris@chris-wilson.co.uk
When declaring the GPU wedged, we do need to hit the GPU with the reset
hammer so that its state matches our presumed state during cleanup. If
the reset fails, it fails, and we may be unhappy but wedged. However, if
we are testing our wedge/unwedged handling, the desync carries over into
the next test and promptly explodes.
References: https://bugs.freedesktop.org/show_bug.cgi?id=106702
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-3-chris@chris-wilson.co.uk
Previously, we were able to rely on the recursive properties of
struct_mutex to allow us to serialise revoking mmaps and reacquiring the
FENCE registers with them being clobbered over a global device reset.
I then proceeded to throw out the baby with the bath water in order to
pursue a struct_mutex-less reset.
Perusing LWN for alternative strategies, the dilemma on how to serialise
access to a global resource on one side was answered by
https://lwn.net/Articles/202847/ -- Sleepable RCU:
1 int readside(void) {
2 int idx;
3 rcu_read_lock();
4 if (nomoresrcu) {
5 rcu_read_unlock();
6 return -EINVAL;
7 }
8 idx = srcu_read_lock(&ss);
9 rcu_read_unlock();
10 /* SRCU read-side critical section. */
11 srcu_read_unlock(&ss, idx);
12 return 0;
13 }
14
15 void cleanup(void)
16 {
17 nomoresrcu = 1;
18 synchronize_rcu();
19 synchronize_srcu(&ss);
20 cleanup_srcu_struct(&ss);
21 }
No more worrying about stop_machine, just an uber-complex mutex,
optimised for reads, with the overhead pushed to the rare reset path.
However, we do run the risk of a deadlock as we allocate underneath the
SRCU read lock, and the allocation may require a GPU reset, causing a
dependency cycle via the in-flight requests. We resolve that by declaring
the driver wedged and cancelling all in-flight rendering.
v2: Use expedited rcu barriers to match our earlier timing
characteristics.
v3: Try to annotate locking contexts for sparse
v4: Reduce selftest lock duration to avoid a reset deadlock with fences
v5: s/srcu/reset_backoff_srcu/
v6: Remove more stale comments
Testcase: igt/gem_mmap_gtt/hang
Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-2-chris@chris-wilson.co.uk
Currently, we may simultaneously release the fence register from both
fence_update() and i915_gem_restore_fences(). This is dangerous, so
defer the bookkeeping entirely to i915_gem_restore_fences() when the
device is asleep.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-1-chris@chris-wilson.co.uk
Since we need multiple components for I915 for different purposes
(Audio & Mei_hdcp), we adopt the subcomponents methodology introduced
by the previous patch (mentioned below).
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Jan 28 17:08:20 2019 +0530
components: multiple components for a device
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by-by: Ramalingam C <ramalinagm.c@intel.com> (commit message)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (code)
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Russell King <rmk+kernel@arm.linux.org.uk>
cc: Rafael J. Wysocki <rafael@kernel.org>
cc: Jaroslav Kysela <perex@perex.cz>
cc: Takashi Iwai <tiwai@suse.com>
cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
cc: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-4-daniel.vetter@ffwll.ch
On g4x+ we depend on the primary plane DSPCNTR gamma/csc enable
bits for the pipe bottom color. To guarantee that those are
correct already when enabling the crtc let's do an explicit
->disable_plane() call before enabling the pipe.
On skl+ this will be handled by the explicit PIPE_BOTTOM_COLOR
register which is already part of the normal color commit we
do durign crtc enable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-8-ville.syrjala@linux.intel.com
Planes scanning out C8 will want to use the legacy lut as
their palette. That means the LUT content are unlikely to
be useful for gamma correction on other planes. Thus we
should disable pipe gamma for all the other planes. And
we should reject any non legacy LUT configurations when
C8 planes are present.
Fixes the appearance of the hw cursor when running
X -depth 8.
Note that CHV with it's independent CGM degamma/gamma LUTs
could probably use the CGM for gamma correction even when
the legacy LUT is used for C8. But that would require a
new uapi for configuring the legacy LUT and CGM LUTs at
the same time. Totally not worth it.
v2: Fix typo (Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-7-ville.syrjala@linux.intel.com
As with pipe gamma we can avoid the potential precision loss from
the pipe csc unit when there is no need to use it. And again
we need the same logic for updating the planes.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-6-ville.syrjala@linux.intel.com
The pipe internal precision is higher than what we currently program to
the degamma/gamma LUTs. We can get a higher quality image by bypassing
the LUTs when they're not needed. Let's do that.
Each plane has its own control bit for this, so we have to update
all active planes. The way we've done this we don't actually have
to run through the whole .check_plane() thing. And we actually
do the .color_check() after .check_plane() so we couldn't even do
that without shuffling the code around.
Additionally on pre-skl we have to update the primary plane regardless
of whether it's active or not on account of the primary plane gamma
enable bit also affecting the pipe bottom color.
v2: Drop the '.' from patch title (Uma)
Fix 'primayr' typo (Uma,Matt)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-5-ville.syrjala@linux.intel.com
Just like we did for pipe gamma, let's also track the pipe csc
state. The hardware only exists on ILK+, and currently we always
enable it on hsw+ and never on any other platforms. Just like
with pipe gamma, the primary plane control register is used
for the readout on pre-SKL, and the pipe bottom color register
on SKL+.
v2: Rebase
v3: Allow fastboot with csc_enable changes (Maarten)
Deal with HAS_GMCH
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-4-ville.syrjala@linux.intel.com
Track whether pipe gamma is enabled or disabled. For now we
stick to the current behaviour of always enabling gamma. But
we do get working state readout for this now. On SKL+ we use
the pipe bottom color as our hardware state. On pre-SKL we
read the state back from the primary plane control register.
That only really correct for g4x+, as older platforms never
gamma correct pipe bottom color. But doing the readout the
same way on all platforms is fine, and there is no other way
to do it really.
v2: Initialize val at declaration (Uma)
Drop the bogus skl scaler comment change (Uma)
Rebase
v3: Allow fastboot with gamma_enable changes (Maarten)
v4: Drop the PIPE_BOTTOM_COLOR write from
intel_update_pipe_config() again. It snuck back in
during the rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207203913.5529-1-ville.syrjala@linux.intel.com
On pre-HSW gamma mode is configured via PIPECONF. The bits are
the same except shifted up, so we can reuse just store them in
crtc_state->gamma_mode in the HSW+ way, allowing us to share
some code later.
v2: Allow fastboot with gamma_mode changes (Maarten)
Add space around the '<<' in the reg macro
Deal with HAS_GMCH
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207202146.26423-2-ville.syrjala@linux.intel.com
Since the DPHY rework, one error path doesn't set the return error code
before jumping to its error label, which in turns make gcc (rightfully)
complain about the variable holding the error code being uninitialized.
Fix this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208090540.19626-1-maxime.ripard@bootlin.com
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
-----BEGIN PGP SIGNATURE-----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=ONtd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.0-rc6:
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The LVDS encoders on RZ/G1N SoC is similar to RZ/G1M. Add support for
RZ/G1N (R8A7744) SoC to the LVDS encoder driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Add an of_node_put when the result of of_graph_get_remote_port_parent is
not available.
Add a second of_node_put if no encoder is selected (encoder remains NULL).
The semantic match that finds the first problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)
(
return e;
|
*return ...;
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
dal_gpio_open and dal_gpio_unlock_pin dereference hpd_gpio.
Check for NULL before calling those functions.
Fixes: ac627caf6b ("drm/amd/display: add gpio lock/unlock")
Reported-by: Przemek Socha <soprwa@gmail.com>
CC: Chiawen Huang <chiawen.huang@amd.com>
CC: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changing the i915_edp_psr_debug was enabling, disabling or switching
PSR version by directly calling intel_psr_disable_locked() and
intel_psr_enable_locked(), what is not the default PSR path that will
be executed by real users.
So lets force a fastset in the PSR CRTC to trigger a pipe update and
stress the default code path.
Recently a bug was found when switching from PSR2 to PSR1 while
enable_psr kernel parameter was set to the default parameter, this
changes fix it and also fixes the bug linked bellow were DRRS was
left enabled together with PSR when enabling PSR from debugfs.
v2: Handling missing case: disabled to PSR1
v3: Not duplicating the whole atomic state(Maarten)
v4: Adding back the missing call to intel_psr_irq_control(Dhinakaran)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108341
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206211845.5322-1-jose.souza@intel.com
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused drm/ to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on x86, arm, alpha, ia64 allmodconfig/allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-5-sam@ravnborg.org
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused rcar-du to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
Build tested on arm allmodconfig/allyesconfig.
v2:
- new patch. Changes like drm_probe_helper and other
required several updates
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-4-sam@ravnborg.org
The use of drmP.h is discouraged and removal of it from
drm_modeset_helper.h caused i915 to fail to build.
This patch introduce the necessary fixes to prepare for the
drmP.h removal from drm_modeset_helper.h.
In the files touched the lists of include files was grouped
and sorted.
Build tested on x86 and arm allmodconfig / allyesconfig.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190126122527.11647-3-sam@ravnborg.org
The downgrade of the fullmodeset into fastset
intel_encoder->update_pipe, in possible scenario, skips the En/Dis-able
DDI. Hence breaks the HDCP state change handling.
We also don't have any hdcp tests in CI, because the shard runs don't
have hdcp capable outputs :-/
So this change fixs it by handling the HDCP state change request at
intel_encoder->update_pipe too along with enable and disable of the DDI.
Fixes: d19f958db2 ("drm/i915: Enable fastset for non-boot modesets.")
v2:
Added commit id that broke the HDCP [Daniel]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
cc: Hans de Goede <hdegoede@redhat.com>
cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1549295080-18353-1-git-send-email-ramalingam.c@intel.com
The LUTs are single buffered so we should program them after
the double buffered pipe updates have been latched by the
hardware.
We'll also fix up the IPS vs. split gamma w/a to do the IPS
disable like everyone else. Note that this is currently dead
code as we don't use the split gamma mode on HSW, but that
will be fixed up shortly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Split the color management hooks along the single vs. double
buffered registers line. Of the currently programmed registers
GAMMA_MODE and the ilk+ pipe CSC are double buffered, the
LUTS and CHV CGM block are single buffered.
The double buffered register will be programmed during the
normal pipe update with evasion, and also during pipe enable
so that the settings will already be correct when the pipe
starts up before the planes are enabled.
The single buffered registers are currently programmed before
the vblank evade. Which is totally wrong, but we'll correct
that later.
v2: Add some docs to explain the two vfuncs (Matt,Uma)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
For bdw+ let's move the GAMMA_MODE write for the legacy LUT
mode into the .load_luts() funciton directly, rather than
relying on haswell_load_luts(). We'll be getting rid of
haswell_load_luts() entirely soon, and it's anyway cleaner
to have the GAMMA_MODE write in a single place.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Pass the crtc state etc. as const to the color management commit
functions. And while at it polish some of the local variables.
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
We shouldn't be computing gamma mode during the commit phase.
Move it to the check phase.
v2: Reword comments a bit (Matt)
Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On g4x+ the pipe gamma enable bit for the primary plane affects
the pipe bottom color as well. The same for the pipe csc enable
bit on ilk+. Thus we must configure those bits correctly even
when the primary plane is disabled.
To make the feasible let's split those settings from the
plane_ctl() function into a seprate funciton that we can
call from the ->disable_plane() hook as well.
For consistency we'll do that on all the plane types. While
that has no real benefits at this time, it'll become useful
when we start to control the pipe gamma/csc enable bits
dynamically when we overhaul the color management code.
On pre-g4x there doesn't appear to be any way to gamma
correct the pipe bottom color, but sticking to the same
pattern doesn't hurt. And it'll still help us to do
crtc state readout correctly for the pipe gamma enable
bit for the color management overhaul.
An alternative apporach would be to still precompute these
bits into plane_state->ctl, but that would require that we
run through the plane check even when the plane isn't logically
enabled on any crtc. Currently that condition causes us to
short circuit the entire thing and not call ->check_plane().
There would also be some chicken and egg problems with
->check_plane() vs. crtc color state check that would
requite splitting certain things into multiple steps.
So all in all this seems like the easier route.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205160848.24662-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The exclusive fence is of course perfectly optional here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Fix SMU message format
Send override message after SMU enable features
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The new Vega series GPU cards have in-built bridges. To get the pcie
speed and width supported by the platform walk the hierarchy and get the
slowest link.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The crossbar configuration is usually the same across all designs for a
given SoC generation. But sometimes there are designs that require some
other configuration.
Implement support for parsing the crossbar configuration from a device
tree. If the crossbar configuration is not present in the device tree,
fall back to the default crossbar configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The version of VIC found in Tegra186 and later incorporates improvements
with regards to context isolation. As part of those improvements, stream
ID registers were added that allow to specify separate stream IDs for
the Falcon microcontroller and the VIC memory interface.
While it is possible to also set the stream ID dynamically at runtime to
allow userspace contexts to be completely separated, this commit doesn't
implement that yet. Instead, the static VIC stream ID is programmed when
the Falcon is booted. This ensures that memory accesses by the Falcon or
the VIC are properly translated via the SMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Upon driver failure, the driver core will take care of clearing the
driver data, so there's no need to do so explicitly in the driver.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra186 and later, the ARM SMMU provides an input address space that
is 48 bits wide. However, memory clients can only address up to 40 bits.
If the geometry is used as-is, allocations of IOVA space can end up in a
region that cannot be addressed by the memory clients.
To fix this, restrict the IOVA space to the DMA mask of the host1x
device. Note that, technically, the IOVA space needs to be restricted to
the intersection of the DMA masks for all clients that are attached to
the IOMMU domain. In practice using the DMA mask of the host1x device is
sufficient because all host1x clients share the same DMA mask.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move initialization of the shared IOMMU domain after the host1x device
has been initialized. At this point all the Tegra DRM clients have been
attached to the shared IOMMU domain.
This is important because Tegra186 and later use an ARM SMMU, for which
the driver defers setting up the geometry for a domain until a device is
attached to it. This is to ensure that the domain is properly set up for
a specific ARM SMMU instance, which is unknown at allocation time.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Loading the firmware requires an allocation of IOVA space to make sure
that the VIC's Falcon microcontroller can read the firmware if address
translation via the SMMU is enabled.
However, the allocation currently happens at a time where the geometry
of an IOMMU domain may not have been initialized yet. This happens for
example on Tegra186 and later where an ARM SMMU is used. Domains which
are created by the ARM SMMU driver postpone the geometry setup until a
device is attached to the domain. This is because IOMMU domains aren't
attached to a specific IOMMU instance at allocation time and hence the
input address space, which defines the geometry, is not known yet.
Work around this by postponing the firmware load until it is needed at
the time where a channel is opened to the VIC. At this time the shared
IOMMU domain's geometry has been properly initialized.
As a byproduct this allows the Tegra DRM to be created in the absence
of VIC firmware, since the VIC initialization no longer fails if the
firmware can't be found.
Based on an earlier patch by Dmitry Osipenko <digetx@gmail.com>.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Ramalingam C