Commit Graph

52154 Commits

Author SHA1 Message Date
Ville Syrjälä 5a0404408d drm/i915: Fix legacy gamma mode for ICL
We must remember to actually enable the post CSC gamma if
we expect the legacy LUT to work. Seems to fix NV12 crc
tests on the SDR planes. Curiously we apparently managed to
get 100% match for the HDR planes even without chopping
off the low bits.

Cc: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315195445.26527-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2019-03-18 17:47:03 +02:00
Joonas Lahtinen 8cbd0c70da Add support for floating point half-width formats.
-----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlyI50kACgkQ/lWMcqZw
 E8PF0A/4+HGqNO8HztPcaUriV+azhyitfbANnOfAe3uLaZL8irl1FVAnQ7JJKayy
 DJLNMGSUUQqV84qE4utQigHqDuNRjfY7cAyorNGCH4x84dlDoQybbbc+8w7Tfrw6
 U0AE2T5XyNbDfRTzk/mDqSKjr2BVpMtguW0uT3JALEkci0dBzH2rySEHhbtvA0of
 AGFMw3kmrDLQoHoqrRrTss/r8P8bAlKGBkb8NWLQ8S5Eoij4MP8Q27MQfYQp0mek
 iOM4ZM3V69jUkchvNzs/92ILdBA/2FwiE2DsdlIbWaTbAW3A6jM3QY+bP8NVhc4q
 r/MQ6J9qlLDV3sG7uE7fNdW5Z1zV2gUchEu3UhmY4HbqovVuxp5BDbQ0R+iGI7e4
 OQPHOPrdSVU1R2Wc+i7BYilHNNgm4IISu0Mp/lHUEOmv0MDslKRKVdi86Y5VyL3e
 /jzBId0KdBoMkI14GMBjWUL4E7c3i5SGQmMGlf4mZBd2BUHE7sI0HpLXNPoz32AC
 tyZ1cvRYDD2rAZHMArLVVPOGNTqmOPvAUDi5O2Fg1K+iUEyJPpIywZk+/oilpQgk
 sLgDjrQVtH4UAczx3VMO1JZ71dSwjBkZuhJ+yEqQ2gTHhzxuz5ah9xXn9XpmucNe
 YtNqyldfT0FoTEm9upqcxVwS1kgZJx7Cc85UtNLIIYiazSNu2w==
 =NtCi
 -----END PGP SIGNATURE-----

Merge tag 'topic/hdr-formats-2019-03-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued

Add support for floating point half-width formats.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/00b96cd5-91c7-5677-9620-b138c7a92303@linux.intel.com
2019-03-18 17:13:01 +02:00
Jani Nikula baa09e7d2f drm/i915: use REG_FIELD_PREP() to define register bitfield values
Slightly verbose, but does away with hand rolled shifts. Ties the field
values with the mask defining the field.

Unfortunately we have to make a local copy of FIELD_PREP() to evaluate
to a integer constant expression. But with this, we can ensure the mask
is non-zero, power of 2, fits u32, and the value fits the mask (when the
value is a constant expression).

Convert power sequencer registers as an example.

v4:
- rebase

v3:
- rename the macro to REG_FIELD_PREP to avoid underscore prefix and to
  be in line with kernel macros (Chris)
- rename power of 2 check macro (Chris)

v2:
 - add build-time checks with BUILD_BUG_ON_ZERO()
 - rename to just _FIELD() due to regmap.h REG_FIELD() clash

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a844edda2afa6b54d9b12a6251da02c43ea8a942.1552657998.git.jani.nikula@intel.com
2019-03-18 16:28:04 +02:00
Jani Nikula 78b36b106a drm/i915: deprecate _SHIFT in favor of _MASK passed to accessors
bitfield.h defines FIELD_GET() and FIELD_PREP() macros to access
bitfields using the mask alone, with no need for separate shift. Indeed,
the shift is redundant.

We define REG_FIELD_GET() and REG_FIELD_PREP() wrappers for the above,
in part to force u32 and for consistency with REG_BIT() and
REG_GENMASK(), but also as we'll need to redefine REG_FIELD_PREP() in
follow-up work to make it produce integer constant expressions.

For the most part, REG_FIELD_GET() is shorter than masking followed by
shift, and arguably has more clarity.

REG_FIELD_PREP() can get more verbose than simply shifting in place, but
it does provide masking to ensure we don't overflow the mask, something
we usually don't bother with currently.

Convert power sequencer registers as an example.

v3:
- temp variable removal (Chris)
- rebase

v2:
- Add the REG_FIELD_GET() and REG_FIELD_PREP() wrappers to use them
  consistently from the start.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ab68f52e55e3961bde9458c0d85a12d98ef471df.1552657998.git.jani.nikula@intel.com
2019-03-18 16:27:56 +02:00
Jani Nikula 09b434d4f6 drm/i915: introduce REG_BIT() and REG_GENMASK() to define register contents
Introduce REG_BIT(n) to define register bits and REG_GENMASK(h, l) to
define register bitfield masks.

We define the above as wrappers to BIT() and GENMASK() respectively to
force u32 type to go with our register size, and to add compile time
checks on the bit numbers.

The intention is that these are easier to get right and review against
the spec than hand rolled masks.

Convert power sequencer registers as an example.

v4:
- rebase

v3:
- rename macros to REG_BIT() and REG_GENMASK() to avoid underscore
  prefix and to be in line with kernel macros (Chris)
- add compile time checks (Mika)

v2:
- rename macros to just _BIT() and _MASK() to reduce verbosity

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787307c0ba9bc23471e5ff1e454b8af35771fa37.1552657998.git.jani.nikula@intel.com
2019-03-18 16:27:42 +02:00
Chris Wilson 6cffeb83c7 drm/i915: Stop needlessly acquiring wakeref for debugfs/drop_caches_set
We only need to acquire a wakeref for ourselves for a few operations, as
most either already acquire their own wakeref or imply a wakeref. In
particular, it is i915_gem_set_wedged() that needed us to present it
with a wakeref, which is incongruous with its "use anywhere" ability.

Suggested-by: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Yokoyama, Caz" <caz.yokoyama@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190318095204.9913-7-chris@chris-wilson.co.uk
2019-03-18 13:12:41 +00:00
Chris Wilson 794a11cb67 drm/i915: Sanity check mmap length against object size
We assumed that vm_mmap() would reject an attempt to mmap past the end of
the filp (our object), but we were wrong.

Applications that tried to use the mmap beyond the end of the object
would be greeted by a SIGBUS. After this patch, those applications will
be told about the error on creating the mmap, rather than at a random
moment on later access.

Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Testcase: igt/gem_mmap/bad-size
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314075829.16838-1-chris@chris-wilson.co.uk
2019-03-18 12:58:15 +00:00
Daniele Ceraolo Spurio 535d8d27c0 drm/i915: do not pass dev_priv to low-level forcewake functions
The only usage we have for it is for the regs pointer. Save a pointer to
the set and ack registers instead of the register offsets to remove this
requirement

v2: Keep passing uncore down to the lowest levels to avoid repeated
pointer chasing in the innermost loops:

add/remove: 0/0 grow/shrink: 3/15 up/down: 33/-155 (-122)
Function                                     old     new   delta
fw_domain_init                               320     351     +31
hdmi_port_clock_valid                        319     320      +1
g4x_pre_enable_dp                            364     365      +1
ring_request_alloc                          1852    1851      -1
intel_engine_lookup_user                      50      49      -1
gen11_irq_handler                            738     737      -1
__intel_uncore_forcewake_get                 115     112      -3
intel_uncore_fw_release_timer                198     194      -4
i915_forcewake_domains                       154     150      -4
fw_domain_fini                               172     168      -4
__intel_uncore_forcewake_put                 163     159      -4
___force_wake_auto                           138     134      -4
fw_domains_put                                98      92      -6
__err_print_to_sgl                          4058    4052      -6
intel_uncore_forcewake_reset                 459     444     -15
fw_domains_get                               563     548     -15
fw_domain_wait_ack_with_fallback             490     450     -40
fw_domains_get_with_fallback                 875     828     -47

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313231319.711-2-daniele.ceraolospurio@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190316100045.20240-1-chris@chris-wilson.co.uk
2019-03-16 10:43:53 +00:00
Chris Wilson 9073e5b267 drm/i915: Fix off-by-one in reporting hanging process
ffs() is 1-indexed, but we want to use it as an index into an array, so
use __ffs() instead.

Fixes: eb8d0f5af4 ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315163933.19352-1-chris@chris-wilson.co.uk
2019-03-15 21:10:08 +00:00
Ville Syrjälä f19d90eed6 drm/i915: Split ilk vs. icl csc matrix handling
Split the csc matrix handling to ilk+ and icl+ functions.
This keeps the logic clear on what is loaded into which
CSC unit on the hardware.

We also fix the icl+ code to load the full->limited range
conversion matrix into the output CSC rather than the pipe
CSC which was used on earlier platforms. And we also turn
on the pipe CSC only when the ctm is present.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä b281264f8b drm/i915: Clean the csc limited range/identity programming
Just provide precomputed CSC matrices for the identity and
limited range cases. This removes the remaining nuts and bolts
stuff from ilk_load_csc_matrix(), allowing one to actually
see the high level logic.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä c9e235aa0f drm/i915: Extract ilk_csc_convert_ctm()
Start splitting low level nuts and bolts stuff from
ilk_load_csc_matrix(). The goal is to leave only the clear
high level logic in place.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä d2c19b06d6 drm/i915: Clean up ilk/icl pipe/output CSC programming
We have far too much messy duplicated code in the
pipe/output CSC programming. Simply provide two functions
(ilk_update_pipe_csc() and icl_update_output_csc()) to
program the relevant CSC registers. The desired offsets
and coefficients are passed in as parameters.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä 386ba08fb5 drm/i915: Extract ilk_csc_limited_range()
Extract a helper which determines if we need to use the
pipe CSC for limited range RGB output.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä 9fdfb8e730 drm/i915: Precompute/readout/check CHV CGM mode
Let's precompute the CGM mode for CHV. And naturally we
also read it out and check it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Ville Syrjälä a1f1e61bfb drm/i915: Readout and check csc_mode
Add the missing readout and PIPE_CONF_CHECK() for csc_mode.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190218193137.22914-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2019-03-15 22:32:13 +02:00
Lucas De Marchi daeaaef5ef drm/i915/icl: remove intel_dpll_is_combophy()
This is only used in intel_display() and shouldn't be needed there.
We don't want to keep converting from pll id to pll type so just remove
the function.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-6-lucas.demarchi@intel.com
2019-03-15 09:24:49 -07:00
Lucas De Marchi 2f3ee43cb9 drm/i915/icl: split combo and tbt pll funcs
Like was done for MG and combo, now finish the per-type split of the
vfunc by moving TBT out of the combo functions. Now we can completely
remove icl_pll_id_to_enable_reg() since each PLL type passes all the
information via arguments.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-5-lucas.demarchi@intel.com
2019-03-15 09:24:48 -07:00
Lucas De Marchi 9be8644a14 drm/i915/icl: split combo and mg pll disable
Like was done in the enable case, split the implementation of the
disable for MG and Combo PLLs.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-4-lucas.demarchi@intel.com
2019-03-15 09:24:48 -07:00
Lucas De Marchi 036f8d567b drm/i915/icl: split pll enable in three steps
Create separate functions to 1) enable power, 2) write pll config, and
3) enable pll. Doing this it makes it easier to share the functions for
the different PLL types by passing the right arguments.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-3-lucas.demarchi@intel.com
2019-03-15 09:24:48 -07:00
Lucas De Marchi d2ab5ebf46 drm/i915/icl: split combo and mg pll enable
Let's start using the vfuncs to differentiate MG and Combo PLLs. The end
goal is to decouple the type of the PLL from the IDs since the latter
are likely to change from one platform to another. This also makes the
code easier to read by not having lots of if/else chains on leaf
functions.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-2-lucas.demarchi@intel.com
2019-03-15 09:24:48 -07:00
Chris Wilson 41a1bde367 drm/i915: Always kick the execlists tasklet after reset
With direct submission being disabled while the reset in progress, we
have a small window where we may forgo the submission of a new request
and not notice its addition during execlists_reset_finish. To close this
window, always schedule the submission tasklet on coming out of reset to
catch any residual work.

<6> [333.144082] i915: Running intel_hangcheck_live_selftests/igt_reset_engines
<3> [333.296927] i915_reset_engine(rcs0:idle): failed to idle after reset
<6> [333.296932] i915 0000:00:02.0: [drm] rcs0
<6> [333.296934] i915 0000:00:02.0: [drm] 	Hangcheck 0:a9ddf7a5 [4157 ms]
<6> [333.296936] i915 0000:00:02.0: [drm] 	Reset count: 36048 (global 754)
<6> [333.296938] i915 0000:00:02.0: [drm] 	Requests:
<6> [333.296997] i915 0000:00:02.0: [drm] 	RING_START: 0x00000000
<6> [333.296999] i915 0000:00:02.0: [drm] 	RING_HEAD:  0x00000000
<6> [333.297001] i915 0000:00:02.0: [drm] 	RING_TAIL:  0x00000000
<6> [333.297003] i915 0000:00:02.0: [drm] 	RING_CTL:   0x00000000
<6> [333.297005] i915 0000:00:02.0: [drm] 	RING_MODE:  0x00000200 [idle]
<6> [333.297007] i915 0000:00:02.0: [drm] 	RING_IMR: fffffeff
<6> [333.297010] i915 0000:00:02.0: [drm] 	ACTHD:  0x00000000_00000000
<6> [333.297012] i915 0000:00:02.0: [drm] 	BBADDR: 0x00000000_00000000
<6> [333.297015] i915 0000:00:02.0: [drm] 	DMA_FADDR: 0x00000000_00000000
<6> [333.297017] i915 0000:00:02.0: [drm] 	IPEIR: 0x00000000
<6> [333.297019] i915 0000:00:02.0: [drm] 	IPEHR: 0x00000000
<6> [333.297021] i915 0000:00:02.0: [drm] 	Execlist status: 0x00000001 00000000
<6> [333.297023] i915 0000:00:02.0: [drm] 	Execlist CSB read 5, write 5 [mmio:7], tasklet queued? no (enabled)
<6> [333.297025] i915 0000:00:02.0: [drm] 		ELSP[0] idle
<6> [333.297027] i915 0000:00:02.0: [drm] 		ELSP[1] idle
<6> [333.297028] i915 0000:00:02.0: [drm] 		HW active? 0x0
<6> [333.297044] i915 0000:00:02.0: [drm] 		Queue priority hint: -8186
<6> [333.297067] i915 0000:00:02.0: [drm] 		Q  2afac:5f2+  prio=-8186 @ 50ms: (null)
<6> [333.297068] i915 0000:00:02.0: [drm] HWSP:
<6> [333.297071] i915 0000:00:02.0: [drm] [0000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<6> [333.297073] i915 0000:00:02.0: [drm] *
<6> [333.297075] i915 0000:00:02.0: [drm] [0040] 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000
<6> [333.297077] i915 0000:00:02.0: [drm] [0060] 00000001 00000000 00008002 00000002 00000000 00000000 00000000 00000005
<6> [333.297079] i915 0000:00:02.0: [drm] [0080] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<6> [333.297081] i915 0000:00:02.0: [drm] *
<6> [333.297083] i915 0000:00:02.0: [drm] [00c0] 00000000 00000000 00000000 00000000 a9ddf7a5 00000000 00000000 00000000
<6> [333.297085] i915 0000:00:02.0: [drm] [00e0] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
<6> [333.297087] i915 0000:00:02.0: [drm] *
<6> [333.297089] i915 0000:00:02.0: [drm] Idle? no
<6> [333.297090] i915_reset_engine(rcs0:idle): 3000 resets
<3> [333.297092] i915/intel_hangcheck_live_selftests: igt_reset_engines failed with error -5
<3> [333.455460] i915 0000:00:02.0: Failed to idle engines, declaring wedged!
...
<0> [333.491294] i915_sel-4916    1.... 333262143us : i915_reset_engine: rcs0 flags=4
<0> [333.491328] i915_sel-4916    1.... 333262143us : execlists_reset_prepare: rcs0: depth<-0
<0> [333.491362] i915_sel-4916    1.... 333262143us : intel_engine_stop_cs: rcs0
<0> [333.491396] i915_sel-4916    1d..1 333262144us : process_csb: rcs0 cs-irq head=5, tail=5
<0> [333.491424] i915_sel-4916    1.... 333262145us : intel_gpu_reset: engine_mask=1
<0> [333.491454] kworker/-214     5.... 333262184us : i915_gem_switch_to_kernel_context: awake?=yes
<0> [333.491487] kworker/-214     5.... 333262192us : i915_request_add: rcs0 fence 2afac:1522
<0> [333.491520] kworker/-214     5.... 333262193us : i915_request_add: marking (null) as active
<0> [333.491553] i915_sel-4916    1.... 333262199us : intel_engine_cancel_stop_cs: rcs0
<0> [333.491587] i915_sel-4916    1.... 333262199us : execlists_reset_finish: rcs0: depth->0

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313162835.30228-1-chris@chris-wilson.co.uk
2019-03-15 10:58:23 +00:00
Chris Wilson 2ebd000abc drm/i915/gtt: Refactor common ppgtt initialisation
The basic setup of the i915_hw_ppgtt is the same between gen6 and gen8,
so refactor that into a common routine.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-5-chris@chris-wilson.co.uk
2019-03-15 09:04:54 +00:00
Chris Wilson a9fe9ca44c drm/i915/gtt: Rename i915_vm_is_48b to i915_vm_is_4lvl
Large ppGTT are differentiated by the requirement to go to four levels
to address more than 32b. Given the introduction of more 4 level ppGTT
with different sizes of addressable bits, rename i915_vm_is_48b() to
better reflect the commonality of using 4 levels.

Based on a patch by Bob Paauwe.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-4-chris@chris-wilson.co.uk
2019-03-15 09:04:54 +00:00
Chris Wilson 51d623b675 drm/i915: Drop address size from ppgtt_type
With the introduction of the separate addressable bits into the device
info, we can remove the conflation of the ppgtt size from the ppgtt
type.

Based on a patch by Bob Paauwe.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-3-chris@chris-wilson.co.uk
2019-03-15 09:04:54 +00:00
Chris Wilson cbecbccaa1 drm/i915: Record platform specific ppGTT size in intel_device_info
As the maximum addressable bits is determined by platform, record that
information in our static chipset tables. This has the advantage of
being clearly recorded in our capability dumps for dmesg, debugfs and
error states.

Based on a patch by Bob Paauwe.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-2-chris@chris-wilson.co.uk
2019-03-15 09:04:54 +00:00
Chris Wilson ca6ac684de drm/i915: Mark up vGPU support for full-ppgtt
For compatibility reasons, we only care if the vGPU host provides
support for full-ppgtt. This is independent of the addressable memory
size, so remove the conflation of 48b from the capability name.

Based on a patch by Bob Paauwe.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-1-chris@chris-wilson.co.uk
2019-03-15 09:04:54 +00:00
Rodrigo Vivi 29b43ae2a6 drm/i915: Also use new comparative stuff for more ICP+ stuff
I just noticed that initial PCH comparative patch
left some >= PCH_ICP cases behind.

Let's also cover these cases and leave only the pin map
behind now.

No functional change. Hence no fixes tag.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313214307.26573-1-rodrigo.vivi@intel.com
2019-03-14 13:47:23 -07:00
Chris Wilson 67d4119c07 drm/i915: Refactor to common helpers for prepare/finish between reset & wedge
Since both GPU reset and declaring the device wedged suspend ongoing
driver activity around a hard reset, we can reuse the same code to
reduce the likelihood of forgetting details surrounding reset from
either path.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314084432.3740-1-chris@chris-wilson.co.uk
2019-03-14 15:18:46 +00:00
Chris Wilson d2eeaf2bc0 drm/i915/selftests: Disable preemption while setting up fence-timers
The impossible happens and a future fence expired while we were still
initialising. The probable cause is that the test was preempted and we
lost our scheduler cpu slice. Disable preemption during this test to
rule out preemption as a source of timer disruption.

References: https://bugs.freedesktop.org/show_bug.cgi?id=110039
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313205944.5768-1-chris@chris-wilson.co.uk
2019-03-14 11:47:06 +00:00
Sujaritha Sundaresan 628ac441e8 drm/i915/guc: Preparing for GuC reset along with engine reset
Adding the call to prepare for guc reset along with engine
reset. intel_uc_reset_prepare() calls to disable guc communication
and to sanitize.

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307184445.25895-1-sujaritha.sundaresan@intel.com
2019-03-14 08:31:47 +00:00
José Roberto de Souza 8a9a5608a3 drm/i915/icl+: Always use TPS2 or TPS3 when exiting PSR1
When any other value than EDP_PSR_TP4_TIME_0US is set, TPS1 and TPS4
will be used to do the link training when exiting PSR1.
Happily the eDP panels tested so far was able to sync with source
even without HBR3/TPS4 support but let use the right training
pattern.

TPS4 support was added to PSR1 registers because HBR3/PSR
specification was not closed when ICL was freezed so if HBR3 was
supported by PSR, ICL would already be ready but it was not added to
specification so lets always disable TPS4.

v3: Missed ";" SPANK SPANK SPANK!!!

BSpec: 17524

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-3-jose.souza@intel.com
2019-03-13 14:20:21 -07:00
José Roberto de Souza 1e0c05c090 drm/i915/psr: Move logic to get TPS registers values to another function
This will make hsw_activate_psr1() more easy to read and will make
future modification to TPS registers more easy to review and read.

v4: Rename new function to intel_psr1_get_tp_time() (Dhinakaran and
Rodrigo)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-2-jose.souza@intel.com
2019-03-13 14:20:20 -07:00
José Roberto de Souza 88a0d9606a drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time
A new field with the training pattern(TP) wakeup time for PSR2 was
added to VBT, so lets use it when available otherwise it will
fallback to PSR1 wakeup time.

v2: replacing enum to numerical usec time (Jani)

BSpec: 20131

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-1-jose.souza@intel.com
2019-03-13 14:20:19 -07:00
Rodrigo Vivi c6c30b917d drm/i915: Start using comparative INTEL_PCH_TYPE
In order to make it easier to bring up new platforms
without having to take care about all corner cases
that was previously taken care for previous platforms
we already use comparative INTEL_GEN statements.

Let's start doing the same with PCH.

The only caveats are:
 - less-than comparisons need to be avoided or done with
   attention and check > PCH_NONE as well.
 - It is not necessarily a chronological order, but a matter
   of south display compatibility/inheritance.

v2: Rebased on top of Jani's clean-up which removed the
    need for less-than comparison

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-3-rodrigo.vivi@intel.com
2019-03-13 13:00:30 -07:00
Rodrigo Vivi fba84ad28e drm/i915: Move PCH_NOP to -1
So we can later use PCH >= comparisons. The ultimate goal
is to make it easier for us to introduce a new platform
with south display engine on PCH just by reusing the previous
one.

Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-2-rodrigo.vivi@intel.com
2019-03-13 13:00:28 -07:00
Rodrigo Vivi 2dd24a9c2c drm/i915/gen11+: First assume next platforms will inherit stuff
This exactly same approach was already used from gen9
to gen10 and from gen10 to gen11. Let's also use it
for gen11+.

Let's first assume that we inherit a similar platform
and than we apply the differences on top.

Different from the previous attempts this will be
done this time with coccinelle. We obviously need to
exclude some case that is really exclusive for gen11
like  PCH, Firmware, and few others. Luckly this was
easy to filter by selecting the files we are touching
with coccinelle as exposed below:

spatch -sp_file gen11\+.cocci --in-place i915_perf.c \
       intel_bios.c intel_cdclk.c intel_ddi.c \
       intel_device_info.c intel_display.c intel_dpll_mgr.c \
       intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c

@noticelake@ expression e; @@
-!IS_ICELAKE(e)
+INTEL_GEN(e) < 11
@notgen11@ expression e; @@
-!IS_GEN(e, 11)
+INTEL_GEN(e) < 11
@icelake@ expression e; @@
-IS_ICELAKE(e)
+INTEL_GEN(e) >= 11
@gen11@ expression e; @@
-IS_GEN(e, 11)
+INTEL_GEN(e) >= 11

No functional change.

v2: Remove intel_lrc.c per Tvrtko request since those were w/a
    for ICL hw issuea and media related configuration.

Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308214300.25057-1-rodrigo.vivi@intel.com
2019-03-13 13:00:24 -07:00
Thomas Preston 2131bc0ced drm/i915/bios: assume eDP is present on port A when there is no VBT
We rely on VBT DDI port info for eDP detection on GEN9 platforms and
above. This breaks GEN9 platforms which don't have VBT because port A
eDP now defaults to false. Fix this by defaulting to true when VBT is
missing.

Fixes: a98d9c1d7e ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection")
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
2019-03-13 18:10:17 +02:00
Kevin Strasser a94bed60cb drm/i915/icl: Implement half float formats
64 bpp half float formats are supported on hdr planes only and are subject
to the following restrictions:
  * 90/270 rotation not supported
  * Yf Tiling not supported
  * Frame Buffer Compression not supported
  * Color Keying not supported

v2:
- Drop handling pixel normalize register
- Don't use icl_is_hdr_plane too early

v3:
- Use refactored icl_is_hdr_plane (Ville)
- Use u32 instead of uint32_t (Ville)

v6:
- Rebase and fix merge conflicts
- Reorganize switch statements to keep RGB grouped separately from YUV

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-4-git-send-email-kevin.strasser@intel.com
2019-03-13 11:23:12 +01:00
Kevin Strasser 42fd20edf6 drm/i915: Refactor icl_is_hdr_plane
Change the api in order to enable callers that can't supply a valid
intel_plane pointer, as would be the case prior to calling
drm_universal_plane_init.

v4:
- Rename variables and move a declaration (Ville)

v6:
- Rebase and fix merge conflict

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-3-git-send-email-kevin.strasser@intel.com
2019-03-13 11:12:42 +01:00
Kevin Strasser 88ab9c76d1 drm/fourcc: Add 64 bpp half float formats
Add 64 bpp 16:16:16:16 half float pixel formats. Each 16 bit component is
formatted in IEEE-754 half-precision float (binary16) 1:5:10
MSb-sign:exponent:fraction form.

This patch attempts to address the feedback provided when 2 of these
formats were previosly proposed:
  https://patchwork.kernel.org/patch/10072545/

v2:
- Fixed cpp (Ville)
- Added detail pixel formatting (Ville)
- Ordered formats in header (Ville)

v5:
- .depth should be 0 for new formats (Maarten)

Cc: Tina Zhang <tina.zhang@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-2-git-send-email-kevin.strasser@intel.com
2019-03-13 11:10:31 +01:00
Chris Wilson 22acf9fc18 drm/i915/selftests: Improve error detection of reset failure
Use a timedwait to promptly detect if the recovery after reset fails and
provide a meaningful debug dump.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-2-chris@chris-wilson.co.uk
2019-03-12 12:49:30 +00:00
Chris Wilson 4b378c0672 drm/i915: Consolidate reset-request debug message
Move the pair of messages to the common callsite where it makes sense to
include a bit more information about which request is being reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190312111146.10662-1-chris@chris-wilson.co.uk
2019-03-12 12:49:29 +00:00
Joonas Lahtinen 3461cbfd34 Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlyA6D8ACgkQ/lWMcqZw
 E8MkeA/+KRMSXY2ljbi59SKRx0/pQ0HPoZv4sb7J7Rr0IHTEOfTfxJRNjIbJDHvu
 DR9F6+dx43XExWNr4mbKQ3Fooc7zKUJ/Fn1MrwVwr647LIBHtsw2VQ3PAcIK50Ph
 ml+rDahrEAoUF8FMAXAK8IjXh5BXG/HSOAu14JMxQvKGm4/CmAgKFnPYU16Eg1Oc
 kEi394cJ/DKsalXqIQiFDmCViuAYKUbMRoYYkAa/gr451zuGVoIOwSbhHTNcvjc2
 cnF8oMAgjVdhp0egtKOqCHGXqSd0l4LMxjy5zOyatpgmMELK7Ns1dyWMtyPFQWKp
 pgD/QoGWn7aTMR1ihh6u0tNOfRIHQxrXVXAjHfA2uWVQC6Ms9cDilNkyizOXrcb6
 r9tAOTeGQI6mhVhQhaVzi/NSYxrsXBt8Bo6Spj8QYupfNGU0tlOxwMqtcHXrJZ1N
 06/+IPXwzYVkxzhtR3ORvwqFOkIT4ZvOc5zxT27TKSBR/HMDa4CFJFrcAAR+3eN+
 Wn6wLDDxPW+ZA7Oitrq5iAJaXif8QEEtXETS/S3ZubDFw0qQYvFJbmpNOSMd9qk4
 WfxUhzMiLm2DuD44b3x28fi0ekLehquWFuyBrIyAic5K+GDMJamqSBgKXXB5Oen6
 hbL1mBq5ZdMZRfOR+ss2QwlbI47deHdhhEq36Rl7gi1Pub2qNuY=
 =u0KV
 -----END PGP SIGNATURE-----

Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued

Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
2019-03-11 13:11:37 +02:00
Joonas Lahtinen bd2dba19d3 Merge drm/drm-next into drm-intel-next-queued
To facilitate merging topic/hdr-formats from Maarten.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-03-11 13:09:20 +02:00
Aditya Swarup 26eeea1506 drm/i915/icl: Fix CRC mismatch error for DP link layer compliance
Setting the pixel rounding bit to 1 in PIPE_CHICKEN register allows
to passthrough FB pixels unmodified across pipe. This fixes the failures
for DP link layer compliance tests 4.4.1.1, 4.4.1.2 & 4.4.1.3.
(Lineage #1605353570)

v2: This is also needed to fix failing IGT test case kms_cursor_crc on
ICL.(Mika Kahola)
Make macros consistent with i915_reg.h comments.(Jani Nikula)

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307021412.18626-1-aditya.swarup@intel.com
References: https://bugs.freedesktop.org/show_bug.cgi?id=103232
2019-03-11 10:56:47 +01:00
Joonas Lahtinen f4ecb8ae70 drm/i915: Update DRIVER_DATE to 20190311
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-03-11 10:17:04 +02:00
Chris Wilson 85fddf0b00 drm/i915: Introduce a context barrier callback
In the next patch, we will want to update live state within a context.
As this state may be in use by the GPU and we haven't been explicitly
tracking its activity, we instead attach it to a request we send down
the context setup with its new state and on retiring that request
cleanup the old state as we then know that it is no longer live.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190309160250.29324-1-chris@chris-wilson.co.uk
2019-03-09 17:19:54 +00:00
Chris Wilson 831ebf18d6 drm/i915: Suppress the "Failed to idle" warning for gem_eio
It is debatable whether having an error message on suspend for forcibly
cancelling outstanding work is worthwhile. We want to know if it occurs
in the wild (as we will then have to reconsider the approach!), but
equally is not fatal across suspend, as upon resume we automatically
clear the wedged status.

However, CI does trigger this scenario with gem_eio/suspend; as there we
are intentionally wedging the device upon suspend. The dilemma is how
not to trigger a failure report for the dmesg spam, for which the
quickest response is to suppress the warning in the kernel. I'd rather
mark it as accepted in gem_eio, but for now detecting when gem_eio is
playing games and cancelling the warning for that case seems a barely
acceptable hack.

Testcase: igt/gem_eio/suspend
Reference: 5861b013e2 ("drm/i915: Do a synchronous switch-to-kernel-context on idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308134512.19115-1-chris@chris-wilson.co.uk
2019-03-08 19:11:29 +00:00
José Roberto de Souza 8f6e87d6d5 drm/i915: Enable PSR2 by default
The support for PSR2 was polished, IGT tests for PSR2 was added and
it was tested performing regular user workloads like browsing,
editing documents and compiling Linux, so it is time to enable it by
default and enjoy even more power-savings.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308000050.6226-9-jose.souza@intel.com
2019-03-08 10:34:08 -08:00