Several bindings for ethernet switches are available for non-dsa switches
by way of ethernet-switch.yaml. Remove these duplicate entries and utilize
the common bindings for the VSC7514.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa-port.yaml binding had several references that can be common to all
ethernet ports, not just dsa-specific ones. Break out the generic bindings
to ethernet-switch-port.yaml they can be used by non-dsa drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa.yaml bindings had references that can apply to non-dsa switches. To
prevent duplication of this information, keep the dsa-specific information
inside dsa.yaml and move the remaining generic information to the newly
created ethernet-switch.yaml.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
dsa.yaml contains a reference to dsa-port.yaml, so a duplicate reference to
the binding isn't necessary. Remove this unnecessary reference.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dsa.yaml binding contains duplicated bindings for address and size
cells, as well as the reference to dsa-port.yaml. Instead of duplicating
this information, remove the reference to dsa-port.yaml and include the
full reference to dsa.yaml.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Explicitly allow additional properties for both the ethernet-port and
ethernet-ports properties. This specifically will allow the qca8k.yaml
binding to use shared properties.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA switches can fall into one of two categories: switches where all ports
follow standard '(ethernet-)?port' properties, and switches that have
additional properties for the ports.
The scenario where DSA ports are all standardized can be handled by
switches with a reference to the new 'dsa.yaml#/$defs/ethernet-ports'.
The scenario where DSA ports require additional properties can reference
'$dsa.yaml#' directly. This will allow switches to reference these standard
definitions of the DSA switch, but add additional properties under the port
nodes.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk> # realtek
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The children of the switch node don't have a unit address, and therefore
should not need the #address-cells or #size-cells entries. Fix the example
schemas accordingly.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The property use-bcm-hdr was documented as an entry under the ports node
for the bcm_sf2 DSA switch. This property is actually evaluated for each
port. Correct the documentation to match the actual behavior and properly
reference dsa-port.yaml for additional properties of the node.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAINTAINERS file has Andrew Lunn, Florian Fainelli, and Vladimir Oltean
listed as the maintainers for generic dsa bindings. Update dsa.yaml and
dsa-port.yaml accordingly.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steen Hegelund says:
====================
net: microchip: Add support for two classes of VCAP rules
This adds support for two classes of VCAP rules:
- Permanent rules (added e.g. for PTP support)
- TC user rules (added by the TC userspace tool)
For this to work the VCAP Loopups must be enabled from boot, so that the
"internal" clients like PTP can add rules that are always active.
When the TC tool add a flower filter the VCAP rule corresponding to this
filter will be disabled (kept in memory) until a TC matchall filter creates
a link from chain 0 to the chain (lookup) where the flower filter was
added.
When the flower filter is enabled it will be written to the appropriate
VCAP lookup and become active in HW.
Likewise the flower filter will be disabled if there is no link from chain
0 to the chain of the filter (lookup), and when that happens the
corresponding VCAP rule will be read from the VCAP instance and stored in
memory until it is deleted or enabled again.
Version History:
================
v4 Removed a leftover 'Fixes' tag from v2. No functional changes.
v3 Removed the change that allowed rules to always be added in the
LAN996x even though the lookups are not enabled (Horatiu Vultur).
This was sent separately to net instead.
Removed the 'Fixes' tags due to the patch sent to net by Horatiu
Vultur.
Added a check for validity of the chain source when enabling a
lookup.
v2 Adding a missing goto exit in vcap_add_rule (Dan Carpenter).
Added missing checks for error returns in vcap_enable_rule.
v1 Initial version
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This supports that individual rules are enabled and disabled via chain
information.
This is done by keeping disabled rules in the VCAP list (cached) until they
are enabled, and only at this time are the rules written to the VCAP HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows a VCAP rule to be in one of 3 states:
- permanently stored in the VCAP HW (for rules that must always be present)
- enabled (stored in HW) when the corresponding lookup has been enabled
- disabled (stored in SW) when the lookup is disabled
This way important VCAP rules can be added even before the user enables the
VCAP lookups using a TC matchall filter.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the way the chain information verified when adding a new tc
flower filter.
When adding a flower filter it is now checked that the filter contains a
goto action to one of the IS2 VCAP lookups, except for the last lookup
which may omit this goto action.
It is also checked if you attempt to add multiple matchall filters to
enable the same VCAP lookup. This will be rejected.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds both the source and destination chain id to the information kept
for enabled port lookups.
This allows enabling and disabling a chain of lookups by walking the chain
information for a port.
This changes the way that VCAP lookups are enabled from userspace: instead
of one matchall rule that enables all the 4 Sparx5 IS2 lookups, you need a
matchall rule per lookup.
In practice that is done by adding one matchall rule in chain 0 to goto IS2
Lookup 0, and then for each lookup you add a rule per lookup (low priority)
that does a goto to the next lookup chain.
Examples:
If you want IS2 Lookup 0 to be enabled you add the same matchall filter as
before:
tc filter add dev eth12 ingress chain 0 prio 1000 handle 1000 matchall \
skip_sw action goto chain 8000000
If you also want to enable lookup 1 to 3 in IS2 and chain them you need
to add the following matchall filters:
tc filter add dev eth12 ingress chain 8000000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8100000
tc filter add dev eth12 ingress chain 8100000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8200000
tc filter add dev eth12 ingress chain 8200000 prio 1000 handle 1000 \
matchall skip_sw action goto chain 8300000
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The conversion to the platform specific multi-word format is moved from the
key/action add functions to the encoding key/action.
This allows rules that are disabled (not in VCAP HW) to use the same format
for keys/actions as rules that have just been read from VCAP HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This changes the VCAP lookups state to always be enabled so that it is
possible to add "internal" VCAP rules that must be available even though
the user has not yet enabled the VCAP chains via a TC matchall filter.
The API callback to enable and disable VCAP lookups is therefore removed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a rule counter is external to the VCAP such as the Sparx5 IS2 counters
are, then this counter must be reset when a new rule is created.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For consistency the VCAP cache area is erased just before the new rule is
being encoded.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ASPM issues may result in the NIC not being accessible any longer.
In this case disabling ASPM may not work. Therefore detect this case
by checking whether register reads return ~0, and try to make the
NIC accessible again by resetting the secondary bus.
v2:
- add exception handling for the case that pci_reset_bus() fails
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch receives management traffic such as STP and LLDP. However, PTP
messages are not received, only transmitted.
Ideally, the switch would trap all PTP messages to the management CPU. This
particular switch has a PTP block which identifies PTP messages and traps them
to a dedicated port. There is a register to program this destination. This is
not used at the moment.
Therefore, program it to the same port as the MGMT traffic is trapped to. This
allows to receive PTP messages as soon as timestamping is enabled.
In addition, the datasheet mentions that this register is not valid e.g., for
6190 variants. So, add a new PTP operation which is added for the 6390 and 6290
devices.
Tested simply like this on Marvell 88E6390, revision 1:
|/ # ptp4l -2 -i lan4 --tx_timestamp_timeout=40 -m
|[...]
|ptp4l[147.450]: master offset 56 s2 freq +1262 path delay 413
|ptp4l[148.450]: master offset 22 s2 freq +1244 path delay 434
|ptp4l[149.450]: master offset 5 s2 freq +1234 path delay 446
|ptp4l[150.451]: master offset 3 s2 freq +1233 path delay 451
|ptp4l[151.451]: master offset 1 s2 freq +1232 path delay 451
|ptp4l[152.451]: master offset -3 s2 freq +1229 path delay 451
|ptp4l[153.451]: master offset 9 s2 freq +1240 path delay 451
Link: https://lore.kernel.org/r/CAFSKS=PJBpvtRJxrR4sG1hyxpnUnQpiHg4SrUNzAhkWnyt9ivg@mail.gmail.com
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.
This patch introduces the following performance changes:
Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d ("Linux 6.2-rc3")
Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s
After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-13 (ixgbe)
This series contains updates to ixgbe driver only.
Jesse resolves warning for RCU pointer by no longer restoring old
pointer.
Sebastian adds waiting for updating of link info on devices utilizing
crosstalk fix to avoid false link state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also
encoding associated encoding of the C45 device address and register
address into one value. regmap-mdio also uses this encoding for the
C45 bus.
Move to the new C45 helpers for MDIO access and provide regmap-mdio
helper macros.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
After switching to TCP_ESTABLISHED or TCP_LISTEN sk_state, alive SOCK_STREAM
and SOCK_SEQPACKET sockets can't change it anymore (since commit 3ff8bff704
"unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()").
Thus, we do not need to take lock here.
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heng Qi says:
====================
virtio-net: support multi buffer xdp
Changes since PATCH v4:
- Make netdev_warn() in [PATCH 2/10] independent from [PATCH 3/10].
Changes since PATCH v3:
- Separate fix patch [2/10] for MTU calculation of single buffer xdp.
Note that this patch needs to be backported to the stable branch.
Changes since PATCH v2:
- Even if single buffer xdp has a hole mechanism, there will be no
problem (limiting mtu and turning off GUEST GSO), so there is no
need to backport "[PATCH 1/9]";
- Modify calculation of MTU for single buffer xdp in virtnet_xdp_set();
- Make truesize in mergeable mode return to literal meaning;
- Add some comments for legibility;
Changes since RFC:
- Using headroom instead of vi->xdp_enabled to avoid re-reading
in add_recvbuf_mergeable();
- Disable GRO_HW and keep linearization for single buffer xdp;
- Renamed to virtnet_build_xdp_buff_mrg();
- pr_debug() to netdev_dbg();
- Adjusted the order of the patch series.
Currently, virtio net only supports xdp for single-buffer packets
or linearized multi-buffer packets. This patchset supports xdp for
multi-buffer packets, then larger MTU can be used if xdp sets the
xdp.frags. This does not affect single buffer handling.
In order to build multi-buffer xdp neatly, we integrated the code
into virtnet_build_xdp_buff_mrg() for xdp. The first buffer is used
for prepared xdp buff, and the rest of the buffers are added to
its skb_shared_info structure. This structure can also be
conveniently converted during XDP_PASS to get the corresponding skb.
Since virtio net uses comp pages, and bpf_xdp_frags_increase_tail()
is based on the assumption of the page pool,
(rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag))
is negative in most cases. So we didn't set xdp_rxq->frag_size in
virtnet_open() to disable the tail increase.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver can pass the skb to stack by build_skb_from_xdp_buff().
Driver forwards multi-buffer packets using the send queue
when XDP_TX and XDP_REDIRECT, and clears the reference of multi
pages when XDP_DROP.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the clear construction of xdp_buff, we remove the xdp processing
interleaved with page_to_skb(). Now, the logic of xdp and building
skb from xdp are separate and independent.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This converts the xdp_buff directly to a skb, including
multi-buffer and single buffer xdp. We'll isolate the
construction of skb based on xdp from page_to_skb().
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This serves as the basis for XDP_TX and XDP_REDIRECT
to send a multi-buffer xdp_frame.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build multi-buffer xdp using virtnet_build_xdp_buff_mrg().
For the prefilled buffer before xdp is set, we will probably use
vq reset in the future. At the same time, virtio net currently
uses comp pages, and bpf_xdp_frags_increase_tail() needs to calculate
the tailroom of the last frag, which will involve the offset of the
corresponding page and cause a negative value, so we disable tail
increase by not setting xdp_rxq->frag_size.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support xdp for multi buffer packets in mergeable mode.
Putting the first buffer as the linear part for xdp_buff,
and the rest of the buffers as non-linear fragments to struct
skb_shared_info in the tailroom belonging to xdp_buff.
Let 'truesize' return to its literal meaning, that is, when
xdp is set, it includes the length of headroom and tailroom.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update relative record value for xdp_frame as basis
for multi-buffer xdp transmission.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the xdp program sets xdp.frags, which means it can process
multi-buffer packets over larger MTU, so we continue to support xdp.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When single-buffer xdp is loaded, the size of the buffer filled each time
is 'sz = (PAGE_SIZE - headroom - tailroom)', which is the maximum packet
length that the driver allows the device to pass in. Otherwise, the packet
with a length greater than sz will come in, so num_buf will be greater than
or equal to 2, and xdp_linearize_page() will be performed and the packet
will be dropped because the total length is greater than PAGE_SIZE. So the
maximum value of MTU for single-buffer xdp is 'max_sz = sz - ETH_HLEN'.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XDP core assumes that the frame_size of xdp_buff and the length of
the frag are PAGE_SIZE. The hole may cause the processing of xdp to
fail, so we disable the hole mechanism when xdp is set.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Updates CPT inbound inline IPsec configure mailbox to take
CPT credit, opcode, credit_th and bpid from VF.
This patch also adds a mailbox to read inbound IPsec
configuration.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Thompson says:
====================
mlxbf_gige: add BlueField-3 support
This patch series adds driver logic to the "mlxbf_gige"
Ethernet driver in order to support the third generation
BlueField SoC (BF3). The existing "mlxbf_gige" driver is
extended with BF3-specific logic and run-time decisions
are made by the driver depending on the SoC generation
(BF2 vs. BF3).
The BF3 SoC is similar to BF2 SoC with regards to transmit
and receive packet processing:
* Driver rings usage; consumer & producer indices
* Single queue for receive and transmit
* DMA operation
The differences between BF3 and BF2 SoC are:
* In addition to supporting 1Gbps interface speed, the BF3 SoC
adds support for 10Mbps and 100Mbps interface speeds
* BF3 requires SerDes config logic to support its SGMII interface
* BF3 adds support for "ethtool -s" for interface speed config
* BF3 utilizes different MDIO logic for accessing the
board-level PHY device
Testing
- Successful build of kernel for ARM64, ARM32, X86_64
- Tested ARM64 build on FastModels, Palladium, SoC
====================
Link: https://lore.kernel.org/r/20230112202609.21331-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes the white space issue raised by checkpatch:
CHECK: Alignment should match open parenthesis
+static int mlxbf_gige_eth_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch extends the "ethtool_ops" data structure to
include the "set_link_ksettings" callback. This change
enables configuration of the various interface speeds
that the BlueField-3 supports (10Mbps, 100Mbps, and 1Gbps).
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds.
The external PHY is responsible for autonegotiating the speed with the
link partner. Once the autonegotiation is done, the BlueField PLU needs
to be configured accordingly.
This patch does two things:
1) Initialize the advertised control flow/duplex/speed in the probe
based on the BlueField SoC generation (2 or 3)
2) Adjust the PLU speed config in the PHY interrupt handler
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds initial MDIO support for the BlueField-3
SoC. Separate header files for the BlueField-2 and the
BlueField-3 SoCs have been created. These header files
hold the SoC-specific MDIO macros since the register
offsets and bit fields have changed. Also, in BlueField-3
there is a separate register for writing and reading the
MDIO data. Finally, instead of having "if" statements
everywhere to differentiate between SoC-specific logic,
a mlxbf_gige_mdio_gw_t struct was created for this purpose.
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the phylink_get_link_timer_ns() helper to get the period for the
link timer.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1pFyhW-0067jq-Fh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert a wrong fix that was done during the review process. The
intention was to substitute "if(ret < 0)" with "if(ret)".
Unfortunately, the intended fix did not meet the code.
Besides, after additional review, it was decided that "if(ret < 0)"
was actually the right thing to do.
Fixes: 8580e16c28 ("net/ethtool: add netlink interface for the PLCA RS")
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f2277af8951a51cfee2fb905af8d7a812b7beaf4.1673616357.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle says:
====================
net: mdio: Continue separating C22 and C45
I've picked this older series from Andrew up and rebased it onto
the latest net-next.
This is the second patch set in the series which separates the C22
and C45 MDIO bus transactions at the API level to the MDIO bus drivers.
====================
Link: https://lore.kernel.org/r/20230112-net-next-c45-seperation-part-2-v1-0-5eeaae931526@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.
This driver is shared with the Felix DSA switch, so update that at the
same time.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmmac MDIO bus driver in variant gmac4 can perform both C22 and
C45 transfers. Create separate functions for each and register the
C45 versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmicro stmmac xgmac2 MDIO bus driver can perform both C22 and C45
transfers. Create separate functions for each and register the C45
versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The microchip lan743x MDIO bus driver can perform both C22 and C45
transfers in some variants. Create separate functions for each and
register the C45 versions using the new API calls where appropriate.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mediatek bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Colin Foster