The srcu_data structure's ->srcu_lock_count and ->srcu_unlock_count arrays
are read and written locklessly, so this commit adds the data_race()
to the diagnostic-print loads from these arrays in order mark them as
known and approved data-racy accesses.
This data race was reported by KCSAN. Not appropriate for backporting due
to failure being unlikely and due to this being used only by rcutorture.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds stubs for KCSAN's data_race(), ASSERT_EXCLUSIVE_WRITER(),
and ASSERT_EXCLUSIVE_ACCESS() macros to allow code using these macros to
move ahead.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A read of the srcu_struct structure's ->srcu_gp_seq field should not
need READ_ONCE() when that structure's ->lock is held. Except that this
lock is not always held when updating this field. This commit therefore
acquires the lock around updates and removes a now-unneeded READ_ONCE().
This data race was reported by KCSAN.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Switch from READ_ONCE() to lock per Peter Zilstra question. ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The srcu_struct structure's ->srcu_idx field is accessed locklessly,
so reads must use READ_ONCE(). This commit therefore adds the needed
READ_ONCE() invocation where it was missed.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The srcu_struct structure's ->srcu_gp_seq_needed_exp field is accessed
locklessly, so updates must use WRITE_ONCE(). This commit therefore
adds the needed WRITE_ONCE() invocations.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The srcu_node structure's ->srcu_gp_seq_needed_exp field is accessed
locklessly, so updates must use WRITE_ONCE(). This commit therefore
adds the needed WRITE_ONCE() invocations.
This data race was reported by KCSAN. Not appropriate for backporting
due to failure being unlikely.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Convert to plural and add a note that this is for Tree RCU.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The ->srcu_last_gp_end field is accessed from any CPU at any time
by synchronize_srcu(), so non-initialization references need to use
READ_ONCE() and WRITE_ONCE(). This commit therefore makes that change.
Reported-by: syzbot+08f3e9d26e5541e1ecf2@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit removes kfree_rcu() special-casing and the lazy-callback
handling from Tree RCU. It moves some of this special casing to Tiny RCU,
the removal of which will be the subject of later commits.
This results in a nice negative delta.
Suggested-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
[ paulmck: Add slab.h #include, thanks to kbuild test robot <lkp@intel.com>. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because pointer output is now obfuscated, and because what you really
want to know is whether or not the callback lists are empty, this commit
replaces the srcu_data structure's head callback pointer printout with
a single character that is "." is the callback list is empty or "C"
otherwise.
This is the only remaining user of rcu_segcblist_head(), so this
commit also removes this function's definition. It also turns out that
rcu_segcblist_tail() no longer has any callers, so this commit removes
that function's definition while in the area. They were both marked
"Interim", and their end has come.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Because __call_srcu() is not used outside kernel/rcu/srcutree.c,
this commit makes it static.
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Adding DEFINE_SRCU() or DEFINE_STATIC_SRCU() to a loadable module requires
that the size of the reserved region be increased, which is not something
we want to be doing all that often. One approach would be to require
that loadable modules define an srcu_struct and invoke init_srcu_struct()
from their module_init function and cleanup_srcu_struct() from their
module_exit function. However, this is more than a bit user unfriendly.
This commit therefore creates an ___srcu_struct_ptrs linker section,
and pointers to srcu_struct structures created by DEFINE_SRCU() and
DEFINE_STATIC_SRCU() within a module are placed into that module's
___srcu_struct_ptrs section. The required init_srcu_struct() and
cleanup_srcu_struct() functions are then automatically invoked as needed
when that module is loaded and unloaded, thus allowing modules to continue
to use DEFINE_SRCU() and DEFINE_STATIC_SRCU() while avoiding the need
to increase the size of the reserved region.
Many of the algorithms and some of the code was cheerfully cherry-picked
from other code making use of linker sections, perhaps most notably from
tracepoints. All bugs are nevertheless the sole property of the author.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ paulmck: Use __section() and use "default" in srcu_module_notify()'s
"switch" statement as suggested by Joel Fernandes. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
The cleanup_srcu_struct_quiesced() function was added because NVME
used WQ_MEM_RECLAIM workqueues and SRCU did not, which meant that
NVME workqueues waiting on SRCU workqueues could result in deadlocks
during low-memory conditions. However, SRCU now also has WQ_MEM_RECLAIM
workqueues, so there is no longer a potential for deadlock. Furthermore,
it turns out to be extremely hard to use cleanup_srcu_struct_quiesced()
correctly due to the fact that SRCU callback invocation accesses the
srcu_struct structure's per-CPU data area just after callbacks are
invoked. Therefore, the usual practice of using srcu_barrier() to wait
for callbacks to be invoked before invoking cleanup_srcu_struct_quiesced()
fails because SRCU's callback-invocation workqueue handler might be
delayed, which can result in cleanup_srcu_struct_quiesced() being invoked
(and thus freeing the per-CPU data) before the SRCU's callback-invocation
workqueue handler is finished using that per-CPU data. Nor is this a
theoretical problem: KASAN emitted use-after-free warnings because of
this problem on actual runs.
In short, NVME can now safely invoke cleanup_srcu_struct(), which
avoids the use-after-free scenario. And cleanup_srcu_struct_quiesced()
is quite difficult to use safely. This commit therefore removes
cleanup_srcu_struct_quiesced(), switching its sole user back to
cleanup_srcu_struct(). This effectively reverts the following pair
of commits:
f7194ac32c ("srcu: Add cleanup_srcu_struct_quiesced()")
4317228ad9 ("nvme: Avoid flush dependency in delete controller flow")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>
If someone fails to drain the corresponding SRCU callbacks (for
example, by failing to invoke srcu_barrier()) before invoking either
cleanup_srcu_struct() or cleanup_srcu_struct_quiesced(), the resulting
diagnostic is an ambiguous use-after-free diagnostic, and even then
only if you are running something like KASAN. This commit therefore
improves SRCU diagnostics by adding checks for in-flight callbacks at
_cleanup_srcu_struct() time.
Note that these diagnostics can still be defeated, for example, by
invoking call_srcu() concurrently with cleanup_srcu_struct(). Which is
a really bad idea, but sometimes all too easy to do. But even then,
these diagnostics have at least some probability of catching the problem.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Replace the license boiler plate with a SPDX license identifier.
While in the area, update an email address.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
srcu_queue_delayed_work_on() disables preemption (and therefore CPU
hotplug in RCU's case) and then checks based on its own accounting if a
CPU is online. If the CPU is online it uses queue_delayed_work_on()
otherwise it fallbacks to queue_delayed_work().
The problem here is that queue_work() on -RT does not work with disabled
preemption.
queue_work_on() works also on an offlined CPU. queue_delayed_work_on()
has the problem that it is possible to program a timer on an offlined
CPU. This timer will fire once the CPU is online again. But until then,
the timer remains programmed and nothing will happen.
Add a local timer which will fire (as requested per delay) on the local
CPU and then enqueue the work on the specific CPU.
RCUtorture testing with SRCU-P for 24h showed no problems.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
In RCU, the distinction between "rsp", "rnp", and "rdp" has served well
for a great many years, but in SRCU, "sp" vs. "sdp" has proven confusing.
This commit therefore renames SRCU's "sp" pointers to "ssp", so that there
is "ssp" for srcu_struct pointer, "snp" for srcu_node pointer, and "sdp"
for srcu_data pointer.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
The srcu_gp_start() function is called with the srcu_struct structure's
->lock held, but not with the srcu_data structure's ->lock. This is
problematic because this function accesses and updates the srcu_data
structure's ->srcu_cblist, which is protected by that lock. Failing to
hold this lock can result in corruption of the SRCU callback lists,
which in turn can result in arbitrarily bad results.
This commit therefore makes srcu_gp_start() acquire the srcu_data
structure's ->lock across the calls to rcu_segcblist_advance() and
rcu_segcblist_accelerate(), thus preventing this corruption.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: Sebastian Kuzminsky <seb.kuzminsky@gmail.com>
Signed-off-by: Dennis Krein <Dennis.Krein@netapp.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Tested-by: Dennis Krein <Dennis.Krein@netapp.com>
Cc: <stable@vger.kernel.org> # 4.16.x
Ever since cdf7abc461 ("srcu: Allow use of Tiny/Tree SRCU from
both process and interrupt context"), it has been permissible
to use SRCU read-side critical sections in interrupt context.
This allows __call_srcu() to use SRCU read-side critical sections to
prevent a new SRCU grace period from ending before the call to either
srcu_funnel_gp_start() or srcu_funnel_exp_start completes, thus preventing
SRCU grace-period counter overflow during that time.
Note that this does not permit removal of the counter-wrap checks in
srcu_gp_end(). These check are necessary to handle the case where
a given CPU does not interact at all with SRCU for an extended time
period.
This commit therefore adds an SRCU read-side critical section to
__call_srcu() in order to prevent grace period counter wrap during
the funnel-locking process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Allocating a list_head structure that is almost never used, and, when
used, is used only during early boot (rcu_init() and earlier), is a bit
wasteful. This commit therefore eliminates that list_head in favor of
the one in the work_struct structure. This is safe because the work_struct
structure cannot be used until after rcu_init() returns.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Event tracing is moving to SRCU in order to take advantage of the fact
that SRCU may be safely used from idle and even offline CPUs. However,
event tracing can invoke call_srcu() very early in the boot process,
even before workqueue_init_early() is invoked (let alone rcu_init()).
Therefore, call_srcu()'s attempts to queue work fail miserably.
This commit therefore detects this situation, and refrains from attempting
to queue work before rcu_init() time, but does everything else that it
would have done, and in addition, adds the srcu_struct to a global list.
The rcu_init() function now invokes a new srcu_init() function, which
is empty if CONFIG_SRCU=n. Otherwise, srcu_init() queues work for
each srcu_struct on the list. This all happens early enough in boot
that there is but a single CPU with interrupts disabled, which allows
synchronization to be dispensed with.
Of course, the queued work won't actually be invoked until after
workqueue_init() is invoked, which happens shortly after the scheduler
is up and running. This means that although call_srcu() may be invoked
any time after per-CPU variables have been set up, there is still a very
narrow window when synchronize_srcu() won't work, and this window
extends from the time that the scheduler starts until the time that
workqueue_init() returns. This can be fixed in a manner similar to
the fix for synchronize_rcu_expedited() and friends, but until someone
actually needs to use synchronize_srcu() during this window, this fix
is added churn for no benefit.
Finally, note that Tree SRCU's new srcu_init() function invokes
queue_work() rather than the queue_delayed_work() function that is
invoked post-boot. The reason is that queue_delayed_work() will (as you
would expect) post a timer, and timers have not yet been initialized.
So use of queue_work() avoids the complaints about use of uninitialized
spinlocks that would otherwise result. Besides, some delay is already
provide by the aforementioned fact that the queued work won't actually
be invoked until after the scheduler is up and running.
Requested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There now is only one rcu_state structure in a given build of the Linux
kernel, so there is no need to pass it as a parameter to RCU's rcu_node
tree's accessor macros. This commit therefore removes the rsp parameter
from those macros in kernel/rcu/rcu.h, and removes some now-unused rsp
local variables while in the area.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the SRCU grace-period number to the rcutorture statistics
printout, which allows it to be compared to the rcutorture "Writer stall
state" message.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit also adjusts some whitespace while in the area.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Revert string-breaking %s as requested by Andy Shevchenko. ]
SRCU has long used ->srcu_gp_seq, and now RCU uses ->gp_seq. This
commit therefore moves the rcutorture_get_gp_data() function from
a ->gpnum / ->completed pair to ->gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the address of the first callback to the per-CPU rcutorture
output in order to allow lost wakeups to be more efficiently tracked down.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the header comment of srcu_funnel_gp_start() to
document the fact that srcu_funnel_gp_start() does the work of
srcu_funnel_exp_start(), in some cases by invoking it directly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit simply changes some copy-pasta call_rcu() instances to
the correct call_srcu().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current cleanup_srcu_struct() flushes work, which prevents it
from being invoked from some workqueue contexts, as well as from
atomic (non-blocking) contexts. This patch therefore introduced a
cleanup_srcu_struct_quiesced(), which can be invoked only after all
activity on the specified srcu_struct has completed. This restriction
allows cleanup_srcu_struct_quiesced() to be invoked from workqueue
contexts as well as from atomic contexts.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nitzan Carmi <nitzanc@mellanox.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
RCU's expedited grace periods can participate in out-of-memory deadlocks
due to all available system_wq kthreads being blocked and there not being
memory available to create more. This commit prevents such deadlocks
by allocating an RCU-specific workqueue_struct at early boot time, and
providing it with a rescuer to ensure forward progress. This uses the
shiny new init_rescuer() function provided by Tejun (but indirectly).
This commit also causes SRCU to use this new RCU-specific
workqueue_struct. Note that SRCU's use of workqueues never blocks them
waiting for readers, so this should be safe from a forward-progress
viewpoint. Note that this moves SRCU from system_power_efficient_wq
to a normal workqueue. In the unlikely event that this results in
measurable degradation, a separate power-efficient workqueue will be
creates for SRCU.
Reported-by: Prateek Sood <prsood@codeaurora.org>
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
The code in srcu_gp_end() inserts a delay every 0x3ff grace periods in
order to prevent SRCU grace-period work from consuming an entire CPU
when there is a long sequence of expedited SRCU grace-period requests.
However, all of SRCU's grace-period work is carried out in workqueues,
which are in turn within kthreads, which are automatically throttled as
needed by the scheduler. In particular, if there is plenty of idle time,
there is no point in throttling.
This commit therefore removes the expedited SRCU grace-period throttling.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Of course, compilers will optimize out a dead code. Anyway, remove
any dead code for better readibility.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, given a multi-level srcu_node tree, SRCU can scan the full
set of srcu_data structures at each level when cleaning up after a grace
period. This, though harmless otherwise, represents pointless overhead.
This commit therefore eliminates this overhead by scanning the srcu_data
structures only when traversing the leaf srcu_node structures.
Signed-off-by: Ildar Ismagilov <devix84@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU checks each srcu_data structure's grace-period number for counter
wrap four times per cycle by default. This frequency guarantees that
normal comparisons will detect potential wrap. However, the expedited
grace-period number is not checked. The consquences are not too horrible
(a failure to expedite a grace period when requested), but it would be
good to avoid such things. This commit therefore adds this check to
the expedited grace-period number.
Signed-off-by: Ildar Ismagilov <devix84@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves to __func__ for function names in the name of better
resilience to change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The srcu_funnel_exp_start() function checks to see if the srcu_struct
structure's expedited grace period counter needs updating to reflect a
newly arrived request for an expedited SRCU grace period. Unfortunately,
the check is backwards, so this commit reverses the sense of the test.
Signed-off-by: Ildar Ismagilov <devix84@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commits c0b334c5bf and ea9b0c8a26 introduced new sparse warnings
by accessing rcu_node->lock directly and ignoring the __private
marker. Introduce a new wrapper and use it. Also fix a similar problem
in srcutree.c introduced by a3883df393.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Invoking queue_delayed_work() while holding a raw spinlock is forbidden
in -rt kernels, which is exactly what __call_srcu() does, indirectly via
srcu_funnel_gp_start(). This commit therefore downgrades Tree SRCU's
locking from raw to non-raw spinlocks, which works because call_srcu()
is not ever called while holding a raw spinlock.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because many of RCU's files have not been included into docbook, a
number of errors have accumulated. This commit fixes them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tree RCU guarantees that every online CPU has a memory barrier between
any given grace period and any of that CPU's RCU read-side sections that
must be ordered against that grace period. Since RCU doesn't always
know where read-side critical sections are, the actual implementation
guarantees order against prior and subsequent non-idle non-offline code,
whether in an RCU read-side critical section or not. As a result, there
does not need to be a memory barrier at the end of synchronize_rcu()
and friends because the ordering internal to the grace period has
ordered every CPU's post-grace-period execution against each CPU's
pre-grace-period execution, again for all non-idle online CPUs.
In contrast, SRCU can have non-idle online CPUs that are completely
uninvolved in a given SRCU grace period, for example, a CPU that
never runs any SRCU read-side critical sections and took no part in
the grace-period processing. It is in theory possible for a given
synchronize_srcu()'s wakeup to be delivered to a CPU that was completely
uninvolved in the prior SRCU grace period, which could mean that the
code following that synchronize_srcu() would end up being unordered with
respect to both the grace period and any pre-existing SRCU read-side
critical sections.
This commit therefore adds an smp_mb() to the end of __synchronize_srcu(),
which prevents this scenario from occurring.
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Lance Roy <ldr709@gmail.com>
Cc: <stable@vger.kernel.org> # 4.12.x
This commit adds printing of SRCU lock/unlock totals, which are just
the sums of the per-CPU counts. Saves a bit of mental arithmetic.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit gets rid of some ugly #ifdefs in rcutorture.c by moving
the SRCU status printing to the SRCU implementations.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The function process_srcu() is not invoked outside of srcutree.c, so
this commit makes it static and drops the EXPORT_SYMBOL_GPL().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney