- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Make dst_entry pointer as const struct dst_entry* to improve code
readablity to make sure that dst structure fields are not modified by
various functions which are using it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are several places in the ucma ABI where userspace can pass in a
sockaddr but set the address family to AF_IB. When that happens,
rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6,
and the ucma kernel code might end up copying past the end of a buffer
not sized for a struct sockaddr_ib.
Fix this by introducing new variants
int rdma_addr_size_in6(struct sockaddr_in6 *addr);
int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr);
that are type-safe for the types used in the ucma ABI and return 0 if the
size computed is bigger than the size of the type passed in. We can use
these new variants to check what size userspace has passed in before
copying any addresses.
Reported-by: <syzbot+6800425d54ed3ed8135d@syzkaller.appspotmail.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_resolve_ip_route() is used only by ib_core module. Therefore it is
removed as an exported symbol.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_copy_addr copies the ifndex to bound_dev_if.
Therefore avoid copying it again after rdma_copy_addr call is completed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since no caller needs vlan, rdma_translate_ip is simplified to avoid
vlan pointer.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_addr_find_smac_by_sgid() is exported symbol not used by any kernel
module. Therefore its removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdma_resolve_ip already copies 'addr' to its dev_addr argument.
Remove the duplicate memcpy and since it was the only user, remove the
'addr' member from resolve_cb_context.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When computing a UD reverse path (return AH) from a WC the code was not
doing a route lookup anchored in a specific netdevice. This caused several
bugs, including broken IPv6 link-local address support in RoCEv2. [1]
This fixes the lookup by determining the GID table entry that the HW
matched to the SGID for the WC and then using the netdevice from that
entry to perform the route and ND lookup for the 'DGID' to build a return
AH.
RoCE GID table management ensures that right upper netdevices of the
physical netdevices are added. Therefore init_ah_from_wc doesn't need to
perform such check.
Now that route lookup is done based on the netdevice of the GID entry,
simplify code to not have ifindex and vlan pointers. As part of that,
refactor to have netdevice as input parameter. This is already discussed
at [2].
Finally ib_init_ah_from_wc resolves dmac for unicast GID in similar way as
what ib_resolve_eth_dmac() does. So ib_resolve_eth_dmac is refactored to
split for unicast and non unicast GIDs, so that it can be reused by
ib_init_ah_from_wc.
While we are at refactoring ib_resolve_eth_dmac(), it is further
simplified
(a) to avoid hoplimit as optional parameter, as there is only one
user who always queries hoplimit.
(b) for empty line.
(c) avoided zero initialization of ret.
(d) removed as exported symbol as only ib core uses it.
For IPv6, this is tested using simple rping test as below.
rping -sv -a ::0
rping -c -a fe80::268a:7ff:fe55:4661%ens2f1 -C 1 -v -d
[1] https://www.spinics.net/lists/linux-rdma/msg45690.html
[2] https://www.spinics.net/lists/linux-rdma/msg45710.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Function returns zero - make it void.
While there make struct net_device const.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IB/core provides address resolution service and invokes callback
handler when address resolve request completes of requester in worker
thread context.
Such caller might allocate or free memory in callback handler
depending on the completion status to make further progress or to
terminate a connection. Most ULPs resolve route which involves
allocating route entry and path record elements in callback event handler.
It has been noticed that WQ_MEM_RECLAIM flag should not be used for
workers that tend to allocate memory in this [1] thread discussion.
In order to mitigate this situation, WQ_MEM_RECLAIM flag was dropped for
other such WQs in this [2] patch.
Similar problem might arise with address resolution path, though its not
yet noticed. The ib_addr workqueue is not memory reclaim path due to its
nature of invoking callback that might allocate memory or don't free any
memory under memory pressure.
[1] https://www.spinics.net/lists/linux-rdma/msg53239.html
[2] https://www.spinics.net/lists/linux-rdma/msg53416.html
Fixes: f54816261c ("IB/addr: Remove deprecated create_singlethread_workqueue")
Fixes: 5fff41e1f8 ("IB/core: Fix race condition in resolving IP to MAC")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging our (hopefully) final -rc pull branch into our for-next branch
because some of our pending patches won't apply cleanly without having
the -rc patches in our tree.
Signed-off-by: Doug Ledford <dledford@redhat.com>
RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.
This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Make ibnl_chk_listeners function to be one line by removing
unneeded comparison.
Rename that function to be complaint to other functions in RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The pointer to netlink header was not used in the ibnl_multicast
function, so let's remove it and simplify the function
signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Currently while resolving IP address to MAC address single delayed work
is used for resolving multiple such resolve requests. This singled work
is essentially performs two tasks.
(a) any retry needed to resolve and
(b) it executes the callback function for all completed requests
While work is executing callbacks, any new work scheduled on for this
workqueue is lost because workqueue has completed looking at all pending
requests and now looking at callbacks, but work is still under
execution. Any further retry to look at pending requests in
process_req() after executing callbacks would lead to similar race
condition (may be reduce the probably further but doesn't eliminate it).
Retrying to enqueue work that from queue_req() context is not something
rest of the kernel modules have followed.
Therefore fix in this patch utilizes kernel facility to enqueue multiple
work items to a workqueue. This ensures that no such requests
gets lost in synchronization. Request list is still maintained so that
rdma_cancel_addr() can unlink the request and get the completion with
error sooner. Neighbour update event handling continues to be handled in
same way as before.
Additionally process_req() work entry cancels any pending work for a
request that gets completed while processing those requests.
Originally ib_addr was ST workqueue, but it became MT work queue with
patch of [1]. This patch again makes it similar to ST so that
neighbour update events handler work item doesn't race with
other work items.
In one such below trace, (though on 4.5 based kernel) it can be seen
that process_req() never executed the callback, which is likely for an
event that was schedule by queue_req() when previous callback was
getting executed by workqueue.
[<ffffffff816b0dde>] schedule+0x3e/0x90
[<ffffffff816b3c45>] schedule_timeout+0x1b5/0x210
[<ffffffff81618c37>] ? ip_route_output_flow+0x27/0x70
[<ffffffffa027f9c9>] ? addr_resolve+0x149/0x1b0 [ib_addr]
[<ffffffff816b228f>] wait_for_completion+0x10f/0x170
[<ffffffff810b6140>] ? try_to_wake_up+0x210/0x210
[<ffffffffa027f220>] ? rdma_copy_addr+0xa0/0xa0 [ib_addr]
[<ffffffffa0280120>] rdma_addr_find_l2_eth_by_grh+0x1d0/0x278 [ib_addr]
[<ffffffff81321297>] ? sub_alloc+0x77/0x1c0
[<ffffffffa02943b7>] ib_init_ah_from_wc+0x3a7/0x5a0 [ib_core]
[<ffffffffa0457aba>] cm_req_handler+0xea/0x580 [ib_cm]
[<ffffffff81015982>] ? __switch_to+0x212/0x5e0
[<ffffffffa04582fd>] cm_work_handler+0x6d/0x150 [ib_cm]
[<ffffffff810a14c1>] process_one_work+0x151/0x4b0
[<ffffffff810a1940>] worker_thread+0x120/0x480
[<ffffffff816b074b>] ? __schedule+0x30b/0x890
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a6b1e>] kthread+0xce/0xf0
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff816b53a2>] ret_from_fork+0x42/0x70
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
INFO: task kworker/u144:1:156520 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kworker/u144:1 D ffff883ffe1d7600 0 156520 2 0x00000080
Workqueue: ib_addr process_req [ib_addr]
ffff883f446fbbd8 0000000000000046 ffff881f95280000 ffff881ff24de200
ffff883f66120000 ffff883f446f8008 ffff881f95280000 ffff883f6f9208c4
ffff883f6f9208c8 00000000ffffffff ffff883f446fbbf8 ffffffff816b0dde
[1] http://lkml.iu.edu/hypermail/linux/kernel/1608.1/05834.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When resolving an IP address that is on the host of the caller the
result from querying the routing table is the loopback device. This is
not a valid response, because it doesn't represent the RDMA device and
the port.
Therefore, callers need to check the resolved device and if it is a
loopback device find an alternative way to resolve it. To avoid this we
make sure that the response from rdma_resolve_ip() will not be the
loopback device.
While that, we fix an static checker warning about dereferencing an
unintitialized pointer using the same solution as in commit abeffce90c
("net/mlx5e: Fix a -Wmaybe-uninitialized warning") as a reference.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In function addr_resolve() the namespace is a required input parameter
and not an output. It is passed later for searching the routing table
and device addresses. Also, it shouldn't be copied back to the caller.
Fixes: 565edd1d55 ('IB/addr: Pass network namespace as a parameter')
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_put, __skb_put };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_put, __skb_put };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
which actually doesn't cover pskb_put since there are only three
users overall.
A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit eea40b8f62 ("infiniband: call ipv6 route lookup via the stub
interface") introduced a regression in address resolution when connecting
to IPv6 destination addresses. The old code called ip6_route_output(),
while the new code calls ipv6_stub->ipv6_dst_lookup(). The two are almost
the same, except that ipv6_dst_lookup() also calls ip6_route_get_saddr()
if the source address is in6addr_any.
This means that the test of ipv6_addr_any(&fl6.saddr) now never succeeds,
and so we never copy the source address out. This ends up causing
rdma_resolve_addr() to fail, because without a resolved source address,
cma_acquire_dev() will fail to find an RDMA device to use. For me, this
causes connecting to an NVMe over Fabrics target via RoCE / IPv6 to fail.
Fix this by copying out fl6.saddr if ipv6_addr_any() is true for the original
source address passed into addr6_resolve(). We can drop our call to
ipv6_dev_get_saddr() because ipv6_dst_lookup() already does that work.
Fixes: eea40b8f62 ("infiniband: call ipv6 route lookup via the stub interface")
Cc: <stable@vger.kernel.org> # 3.12+
Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With commit eea40b8f62 ("infiniband: call ipv6 route lookup
via the stub interface"), if the route lookup fails due to
ipv6 being disabled, the dst variable is left untouched, and
the following dst_release() may access uninitialized memory.
Since ipv6_dst_lookup() always sets dst to NULL in case of
lookup failure with ipv6 enabled, fix the above just
returning the error code if the lookup fails.
Fixes: eea40b8f62 ("infiniband: call ipv6 route lookup via the stub interface")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The infiniband address handle can be triggered to resolve an ipv6
address in response to MAD packets, regardless of the ipv6
module being disabled via the kernel command line argument.
That will cause a call into the ipv6 routing code, which is not
initialized, and a conseguent oops.
This commit addresses the above issue replacing the direct lookup
call with an indirect one via the ipv6 stub, which is properly
initialized according to the ipv6 status (e.g. if ipv6 is
disabled, the routing lookup fails gracefully)
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh,
the return status of the request was ignored in the callback function
causing a successful return and an empty dmac.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The workqueue "addr_wq" queues a single work item &work and hence
doesn't require ordering. Also, it is being used on a memory reclaim
path. Hence, it has been converted to use alloc_workqueue with
WQ_MEM_RECLAIM set.
WQ_MEM_RECLAIM has been set to ensure forward progress under
memory pressure.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is an assumption that rdmacm is used only between nodes
in the same IB subnet, this why ARP resolution can be used to turn
IP to GID in rdmacm.
When dealing with IB communication between subnets this assumption
is no longer valid. ARP resolution will get us the next hop device
address and not the peer node's device address.
To solve this issue, we will check user space if it can provide the
GID of the peer node, and fail if not.
We add a sequence number to identify each request and fill in the GID
upon answer from userspace.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB address resolution is declared as a module (ib_addr.ko) which loads
itself before IB core module (ib_core.ko).
It causes to the scenario where IB netlink which is initialized by IB
core can't be used by ib_addr.ko.
In order to solve it, we are converting ib_addr.ko to be part of
IB core module.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for
RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as
hop limit values.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and
downsteram patch will also add hop_limit as an output parameter,
thus we rename it to rdma_addr_find_l2_eth_by_grh.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sparse complains about dereference before check. Fixing this by
moving the check before the dereference.
Fixes: 200298326b ('IB/core: Validate route when we init ah')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to make sure API users don't try to use SGIDs which don't
conform to the routing table, validate the route before searching
the RoCE GID table.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Providers should tell IB core the wc's network type.
This is used in order to search for the proper GID in the
GID table. When using HCAs that can't provide this info,
IB core tries to deep examine the packet and extract
the GID type by itself.
We choose sgid_index and type from all the matching entries in
RDMA-CM based on hint from the IP stack and we set hop_limit for
the IP packet based on above hint from IP stack.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add network namespace support to the ib_addr module. For that, all the
address resolution and matching should be done using the appropriate
namespace instead of init_net.
This is achieved by:
1. Adding an explicit network namespace argument to exported function that
require a namespace.
2. Saving the namespace in the rdma_addr_client structure.
3. Using it when calling networking functions.
In order to preserve the behavior of calling modules, &init_net is
passed as the parameter in calls from other modules. This is modified as
namespace support is added on more levels.
Signed-off-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Yotam Kenneth <yotamke@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, vlan id and source MAC were used from QP attributes. Since
the net device is now stored in the GID attributes, they could be used
instead of getting this information from the QP attributes.
IB_QP_SMAC, IB_QP_ALT_SMAC, IB_QP_VID and IB_QP_ALT_VID were removed
because there is no known libibverbs that uses them.
This commit also modifies the vendors (mlx4, ocrdma) drivers in order
to use the new approach.
ocrdma driver changes were done by Somnath Kotur <Somnath.Kotur@Avagotech.Com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to support constant callers of agent_send_response we add const
specifiers to the its pointer arguments.
Adjust the call tree accordingly.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Address resolution always does a context switch to a work-queue to
deliver the address resolution event. When the IP address is already
cached in the system ARP table, we're going through the following:
chain:
rdma_resolve_ip --> addr_resolve (cache hit) -->
which ends up with:
queue_req --> set_timeout (now) --> mod_delayed_work(,, delay=1)
We actually do realize that the timeout should be zero, but the code
forces it to a minimum of one jiffie.
Using one jiffie as the minimum delay value results in sub-optimal
scheduling of executing this work item by the workqueue, which on the
below testbed costs about 3-4ms out of 12ms total time.
To fix that, we let the minimum delay to be zero. Note that the
connect step times change too, as there are address resolution calls
from that flow.
The results were taken from running both client and server on the
same node, over mlx4 RoCE port.
before -->
step total ms max ms min us us / conn
create id : 0.01 0.01 6.00 6.00
resolve addr : 4.02 4.01 4013.00 4016.00
resolve route: 0.18 0.18 182.00 183.00
create qp : 1.15 1.15 1150.00 1150.00
connect : 6.73 6.73 6730.00 6731.00
disconnect : 0.55 0.55 549.00 550.00
destroy : 0.01 0.01 9.00 9.00
after -->
step total ms max ms min us us / conn
create id : 0.01 0.01 6.00 6.00
resolve addr : 0.05 0.05 49.00 52.00
resolve route: 0.21 0.21 207.00 208.00
create qp : 1.10 1.10 1104.00 1104.00
connect : 1.22 1.22 1220.00 1221.00
disconnect : 0.71 0.71 713.00 713.00
destroy : 0.01 0.01 9.00 9.00
Signed-off-by: Or Kehati <ork@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This patch add the support for Ethernet L2 attributes in the
verbs/cm/cma structures.
When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority
in a similar manner that the IB L2 (and the L4 PKEY) attributes are used.
Thus, those attributes were added to the following structures:
* ib_ah_attr - added dmac
* ib_qp_attr - added smac and vlan_id, (sl remains vlan priority)
* ib_wc - added smac, vlan_id
* ib_sa_path_rec - added smac, dmac, vlan_id
* cm_av - added smac and vlan_id
For the path record structure, extra care was taken to avoid the new
fields when packing it into wire format, so we don't break the IB CM
and SA wire protocol.
On the active side, the CM fills. its internal structures from the
path provided by the ULP. We add there taking the ETH L2 attributes
and placing them into the CM Address Handle (struct cm_av).
On the passive side, the CM fills its internal structures from the WC
associated with the REQ message. We add there taking the ETH L2
attributes from the WC.
When the HW driver provides the required ETH L2 attributes in the WC,
they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core
code checks for the presence of these flags, and in their absence does
address resolution from the ib_init_ah_from_wc() helper function.
ib_modify_qp_is_ok is also updated to consider the link layer. Some
parameters are mandatory for Ethernet link layer, while they are
irrelevant for IB. Vendor drivers are modified to support the new
function signature.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Add support for AF_IB to ip_addr_size, and rename the function to
account for the change. Give the compiler more control over whether
the call should be inline or not by moving the definition into the .c
file, removing the static inline, and exporting it.
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().
Most conversions are straight-forward. Ones worth mentioning are,
* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
use mod_delayed_work() and cancel loop in
edac_mc_reset_delay_period() is dropped.
* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
watchdog is active or not. @fan_watchdog_active and related code
dropped.
* drivers/power/charger-manager.c: Seemingly a lot of
delayed_work_pending() abuse going on here.
[delayed_]work_pending() are unsynchronized and racy when used like
this. I converted one instance in fullbatt_handler(). Please
conver the rest so that it invokes workqueue APIs for the intended
target state rather than trying to game work item pending state
transitions. e.g. if timer should be modified - call
mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().
* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
simplified. Note that round_jiffies() calls in this function are
meaningless. round_jiffies() work on absolute jiffies not delta
delay used by delayed_work.
v2: Tomi pointed out that __cancel_delayed_work() users can't be
safely converted to mod_delayed_work(). They could be calling it
from irq context and if that happens while delayed_work_timer_fn()
is running, it could deadlock. __cancel_delayed_work() users are
dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Now we must provide the IP destination address, and a reference has
to be dropped when we're done with the entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
IPV4 should do exactly what the IPV6 code does here, which is
use the neighbour obtained via the dst entry.
And now that the two code paths do the same thing, use a common
helper function to perform the operation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Roland Dreier <roland@purestorage.com>
To reflect the fact that a refrence is not obtained to the
resulting neighbour entry.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Roland Dreier <roland@purestorage.com>
Commit f2c31e32b3 ("net: fix NULL dereferences in check_peer_redir()")
forgot to take care of infiniband uses of dst neighbours.
Many thanks to Marc Aurele who provided a nice bug report and feedback.
Reported-by: Marc Aurele La France <tsi@ualberta.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Linus Torvalds