They were generated by 'codespell' and then manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
assign_to_mp_irq() is copying the struct mpc_intsrc members one by
one. That's silly. Use memcpy() and let the compiler figure it out.
Same for the identical function assign_to_mpc_intsrc()
mp_irq_mpc_intsrc_cmp() is comparing the struct members one by one,
but no caller ever checks the different return codes. Use memcmp()
instead.
Remove the extra printk in MP_ioapic_info()
Signed-off-by: Feng Tang <feng.tang@linux.intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <20101208151857.212f0018@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.
Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It is almost the same as smp_register_lapic_addr(). We just need to
let smp_read_mpc() call smp_register_lapic_addr() when early==1.
Add the apic_printk to smp_register_lapic_address()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4CFDF681.3030509@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
They are the same, move the common function to apic.c to allow
further cleanups.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF675.4060305@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
1. replace find_e820_area with memblock_find_in_range
2. replace reserve_early with memblock_x86_reserve_range
3. replace free_early with memblock_x86_free_range.
4. NO_BOOTMEM will switch to use memblock too.
5. use _e820, _early wrap in the patch, in following patch, will
replace them all
6. because memblock_x86_free_range support partial free, we can remove some special care
7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill()
so adjust some calling later in setup.c::setup_arch()
-- corruption_check and mptable_update
-v2: Move reserve_brk() early
Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range()
that could happen We have more then 128 RAM entry in E820 tables, and
memblock_x86_fill() could use memblock_find_in_range() to find a new place for
memblock.memory.region array.
and We don't need to use extend_brk() after fill_memblock_area()
So move reserve_brk() early before fill_memblock_area().
-v3: Move find_smp_config early
To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable
in right place.
-v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in
memblock.reserved already..
use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later.
-v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit
active_region for 32bit does include high pages
need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped()
-v6: Use current_limit instead
-v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L
-v8: Set memblock_can_resize early to handle EFI with more RAM entries
-v9: update after kmemleak changes in mainline
Suggested-by: David S. Miller <davem@davemloft.net>
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This fixes a regression in 2.6.35 from 2.6.34, that is
present for select models of Intel cpus when people are
using an MP table.
The commit cf7500c0ea
"x86, ioapic: In mpparse use mp_register_ioapic" started
calling mp_register_ioapic from MP_ioapic_info. An extremely
simple change that was obviously correct. Unfortunately
mp_register_ioapic did just a little more than the previous
hand crafted code and so we gained this call path.
The problem call path is:
MP_ioapic_info()
mp_register_ioapic()
io_apic_unique_id()
io_apic_get_unique_id()
get_physical_broadcast()
modern_apic()
lapic_get_version()
apic_read(APIC_LVR)
Which turned out to be a problem because the local apic
was not mapped, at that point, unlike the similar point
in the ACPI parsing code.
This problem is fixed by mapping the local apic when
parsing the mptable as soon as we reasonably can.
Looking at the number of places we setup the fixmap for
the local apic, I see some serious simplification opportunities.
For the moment except for not duplicating the setting up of the
fixmap in init_apic_mappings, I have not acted on them.
The regression from 2.6.34 is tracked in bug
https://bugzilla.kernel.org/show_bug.cgi?id=16173
Cc: <stable@kernel.org> 2.6.35
Reported-by: David Hill <hilld@binarystorm.net>
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m1eiee86jg.fsf_-_@fess.ebiederm.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When I introduced the global variable gsi_end I thought gsi_end on
io_apics was one past the end of the gsi range for the io_apic. After
it was pointed out the the range on io_apics was inclusive I changed
my global variable to match. That was a big mistake. Inclusive
semantics without a range start cannot describe the case when no gsi's
are allocated. Describing the case where no gsi's are allocated is
important in sfi.c and mpparse.c so that we can assign gsi numbers
instead of blindly copying the gsi assignments the BIOS has done as we
do in the acpi case.
To keep from getting the global variable confused with the gsi range
end rename it gsi_top.
To allow describing the case where no gsi's are allocated have gsi_top
be one place the highest gsi number seen in the system.
This fixes an off by one bug in sfi.c:
Reported-by: jacob pan <jacob.jun.pan@linux.intel.com>
This fixes the same off by one bug in mpparse.c:
This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi
Reported-by: Yinghai <yinghai.lu@oracle.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m17hm9jre7.fsf_-_@fess.ebiederm.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Long ago MP_ioapic_info was the primary way of setting up our
ioapic data structures and mp_register_ioapic was a compatibility
shim for acpi code. Now the situation is reversed and
and mp_register_ioapic is the primary way of setting up our
ioapic data structures.
Keep the setting up of ioapic data structures uniform by
having mp_register_ioapic call mp_register_ioapic.
This changes a few fields:
- type: is now hardset to MP_IOAPIC but type had to
bey MP_IOAPIC or MP_ioapic_info would not have been called.
- flags: is now hard coded to MPC_APIC_USABLE.
We require flags to contain at least MPC_APIC_USEBLE in
MP_ioapic_info and we don't ever examine flags so dropping
a few flags that might possibly exist that we have never
used is harmless.
- apicaddr: Unchanged
- apicver: Read from the ioapic instead of using the cached
hardware value in the MP table. The real hardware value
will be more accurate.
- apicid: Now verified to be unique and changed if it is not.
If the BIOS got this right this is a noop. If the BIOS did
not fixing things appears to be the better solution.
This adds gsi_base and gsi_end values to our ioapics defined with
the mpatable, which will make our lives simpler later since
we can always assume gsi_base and gsi_end are valid.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-10-git-send-email-ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
We found a system where the MP table MPC and MPF structures overlap.
That doesn't really matter because the mptable is not used anyways with ACPI,
but it leads to a panic in the early allocator due to the overlapping
reservations in 2.6.33.
Earlier kernels handled this without problems.
Simply change these reservations to reserve_early_overlap_ok to avoid
the panic.
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100329074111.GA22821@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
We need to fall back from logical-flat APIC mode to physical-flat mode
when we have more than 8 CPUs. However, in the presence of CPU
hotplug(with bios listing not enabled but possible cpus as disabled cpus in
MADT), we have to consider the number of possible CPUs rather than
the number of current CPUs; otherwise we may cross the 8-CPU boundary
when CPUs are added later.
32bit apic code can use more cleanups (like the removal of vendor checks in
32bit default_setup_apic_routing()) and more unifications with 64bit code.
Yinghai has some patches in works already. This patch addresses the boot issue
that is reported in the virtualization guest context.
[ hpa: incorporated function annotation feedback from Yinghai Lu ]
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com>
Acked-by: Shaohui Zheng <shaohui.zheng@intel.com>
Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Jens found the following crash/regression:
[ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
[ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page
and
[ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE
and bisected it to b24c2a9 ("x86: Move find_smp_config()
earlier and avoid bootmem usage").
It turns out the BIOS is using the first 64k for mptable,
without reserving it.
So try to find good range for the real-mode trampoline instead of
hard coding it, in case some bios tries to use that range for sth.
Reported-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jens Axboe <jens.axboe@oracle.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <4B21630A.6000308@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the find_smp_config() call to before bootmem is initialized.
Use reserve_early() instead of reserve_bootmem() in it.
This simplifies the code, we only need to call find_smp_config()
once and can remove the now unneeded reserve parameter from
x86_init_mpparse::find_smp_config.
We thus also reduce x86's dependency on bootmem allocations.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B0BB9F2.70907@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
x86: Move get/set_wallclock to x86_platform_ops
x86: platform: Fix section annotations
x86: apic namespace cleanup
x86: Distangle ioapic and i8259
x86: Add Moorestown early detection
x86: Add hardware_subarch ID for Moorestown
x86: Add early platform detection
x86: Move tsc_init to late_time_init
x86: Move tsc_calibration to x86_init_ops
x86: Replace the now identical time_32/64.c by time.c
x86: time_32/64.c unify profile_pc
x86: Move calibrate_cpu to tsc.c
x86: Make timer setup and global variables the same in time_32/64.c
x86: Remove mca bus ifdef from timer interrupt
x86: Simplify timer_ack magic in time_32.c
x86: Prepare unification of time_32/64.c
x86: Remove do_timer hook
x86: Add timer_init to x86_init_ops
x86: Move percpu clockevents setup to x86_init_ops
x86: Move xen_post_allocator_init into xen_pagetable_setup_done
...
Fix up conflicts in arch/x86/include/asm/io_apic.h
Replace the quirk machinery by a x86_init_ops function which defaults
to the standard implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The mpc_apic_id setup is handled by a x86_quirk. Make it a
x86_init_ops function with a default implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The x86 quirkification introduced an extra ugly hackery with a
variable pointer in the mpparse code. If the pointer is initialized
then it is dereferenced and the variable set to 0 or incremented.
Create a x86_init_ops function and let the affected numaq code
hold the function. Default init is a setup noop.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We already have APIC_DEFAULT_PHYS_BASE so just to be
consistent.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175550.927946757@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Len expressed concern that the update_mptable feature has
side-effects on the ACPI code.
Make it sure explicitly that the code only ever gets called if
the (default disabled) update_mptable boot quirk option is
disabled.
[ Impact: isolate the update_mptable feature from ACPI code more ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A0DC832.5090200@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To get all device irq routing and to save them.
This is basically an implicit pci=routeirq enablement if (and on if)
the update_mptable boot option (which is off by default) has been
specified.
[ Impact: extend the update_mptable boot opion's scope ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <4A0DB7B4.4060702@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix the conditions when we stop updating the mptable due to
running out of slots.
[ Impact: fix memory corruption / non-working update_mptable boot parameter ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A01C3BB.1000609@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix section mismatch
In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called
and also refers to a function which is in .init section. Thus causes
the first warning. And check_irq_src() also requires an __init,
because it refers to an .init section.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To reduce the size of the oversized function __get_smp_config()
There should be no impact to functionality.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Impact: cleanup
Refactor the MP-table parsing code via the introduction of the
following helper functions:
skip_entry()
smp_reserve_bootmem()
check_irq_src()
check_slot()
To simplify the code flow and to reduce the size of the
following oversized functions: smp_read_mpc(), smp_scan_config().
There should be no impact to functionality.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Without apic=verbose, using the update_mptable option would result in
garbled and confusing output due to the inconsistent use of printk() vs
apic_printk().
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B914B6.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: save a bit of RAM
Get the exact size for the reserve_bootmem() call.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49AE4922.605@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix boot with mptable above max_low_mapped
Try to use early_ioremap() to map MPC to make sure it works even it is
at the end of ram.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49AE4901.3090801@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-and-tested-by: Kevin O'Connor <kevin@koconnor.net>
Impact: fix early crash on LinuxBIOS systems
Kevin O'Connor reported that Coreboot aka LinuxBIOS tries to put
mptable somewhere very high, well above max_low_pfn (below which
BIOSes generally put the mptable), causing a panic.
The BIOS will probably be changed to be compatible with older
Linus versions, but nevertheless the MP-spec does not forbid
an MP-table in arbitrary system RAM, so make sure it all
works even if the table is in an unexpected place.
Check physptr with max_low_pfn * PAGE_SIZE.
Reported-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Stefan Reinauer <stepan@coresystems.de>
Cc: coreboot@coreboot.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/mpparse.c: In function ‘smp_scan_config’:
arch/x86/kernel/mpparse.c:696: warning: format ‘%08lx’ expects type ‘long unsigned int’, but argument 3 has type ‘phys_addr_t’
arch/x86/kernel/mpparse.c: In function ‘update_mp_table’:
arch/x86/kernel/mpparse.c:1014: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘phys_addr_t’
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
just like 64 bit switch from flat logical APIC messages to
flat physical mode automatically.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.
Rename it to X86_32_NON_STANDARD.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Call all the registered MPS quirk handlers early. These methods scan
low RAM typically for specific signatures so are safe to be called
early.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Fix this by reintroducing asm/smp.h include in mpparse.c - later on
I will fix this by removing non-smp data from smp.h.
Reported-by: Petr Titera <P.Titera@century.cz>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, solve 80 columns wrap problems
It would be cleaner to rename all the mpf->mpf_X fields to
mpf->X - that alone would give 4 characters per usage site.
(we already know that it's an 'mpf' entity -
no need to duplicate that in the field too)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Lucas De Marchi