Unfortunately UHID interface, as it was introduced, is broken with 32 bit
userspace running on 64 bit kernels as it uses a pointer in its userspace
facing API.
Fix it by checking if we are executing compat task and munge the request
appropriately.
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The buttons of the Wii Remote Nunchuck extension are actually active low.
Fix the parser to forward the inverted values. The comment in the function
always said "0 == pressed" but the implementation was wrong from the
beginning.
Cc: stable@vger.kernel.org
Reported-by: Victor Quicksilver <victor.quicksilver@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These are simple data acquistion boards, not HID devices and are handled
by the vmk80xx comedi driver. At least one of them (10cf:5500)
misidentifies itself as a HID in its USB interface descriptor. Ignore
all these devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We now have two transport mediums: USB and I2C, where sensor hubs can
exists. So instead of constraining the driver to only these two we let it
to match any HID bus as long as the group is HID_GROUP_SENSOR_HUB.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This table is not used anywhere in the driver so kill it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the advent of HID over I2C protocol, it is possible to have sensor
hubs behind I2C bus as well. We can autodetect this in a same way than USB
sensor hubs.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The use of input_configured() allows the ntrig driver to actually
change the name of the input and its bitmask before it is added to the
input subsystem. Thus, the logs are coherents and udev catch the real
bitmask when the device is added.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous implementation registered a pointer towards hid-core
to the value of contact count. This is not safe and may be difficult
to debug if hid-core ever changes its implementation.
The use of regular indexes is a better choice.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID Sensors framework support (CONFIG_HID_SENSOR_HUB) unconditionally
selects MFD_CORE which however depends on GENERIC_HARDIRQS.
So add this dependency to HID_SENSOR_HUB as well.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By running a test on all the traces of the devices I have,
I noticed that the class MT_CLS_ALWAYS_TRUE could handle all
the devices I've seen so far without any other quirks.
I guess this is the behavior Win 7 requires in its driver.
We can change the default class then and keep the existing classes
for backward compatibility and performances for some of them.
Two operations have been done:
* replaced MT_CLS_DEFAULT by MT_CLS_NSMU
* then replaced MT_CLS_ALWAYS_TRUE by MT_CLS_DEFAULT
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous protocol was nearly working, but when several fingers were
present on the sensor, those that were not moving were not updated
in the next report, introducing a lot of releases.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Conflicts:
drivers/hid/hid-multitouch.c
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cando 2087:0a02 was broken, this fixes it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the inclusion of this device in hid-multitouch, the device
did not forward any events. Using the serial class makes it working
again.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The serial protocol makes contact count a redondant information, and
sometimes it is not reliable (TRS-Star are in this case).
Disabling the use of contact count for these devices is thus safer.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Sharp LC-20FE1-W screen (04dd:9681) behaves like the Nexio 42".
It may report out of ranges values that are filtered out by relying
on the Contact Count HID field.
Adding the quirk MT_QUIRK_CONTACT_CNT_ACCURATE makes hid-multitouch
strongest against this kind of device, without breaking the current
devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device is the worst device I saw. It keeps TipSwitch and InRange
at 1 for fingers that are not touching the panel.
The solution is to rely on the field ContactCount, which is accurate
as the correct information are packed at the begining of the frame.
Unfortunately, CountactCount is most of the time at the end of the report.
The solution is to pick it when we have the whole report in raw_event.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nexio 42" devices requires to rely on the HID field Contact
Count to compute the valid values. However, this field is
most of the time at the end of the report, meaning that we
need to get the all report parsed before processing it.
This patch does not introduce functional changes.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This callback is called when the parsing of the report has been done
by hid-core (so after the calls to .event). The hid drivers can now
have access to the whole report by relying on the values stored in
the different fields.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
PullHID fixes from Jiri Kosina:
- fix i2c-hid and hidraw interaction, by Benjamin Tissoires
- a quirk to make a particular device (Formosa IR receiver) work
properly, by Nicholas Santos
* 'for-3.8/upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: fix i2c_hid_output_raw_report
HID: usbhid: quirk for Formosa IR receiver
HID: remove x bit from sensor doc
i2c_hid_output_raw_report is used by hidraw to forward set_report requests.
The current implementation of i2c_hid_set_report needs to take the
report_id as an argument. The report_id is stored in the first byte
of the buffer in argument of i2c_hid_output_raw_report.
Not removing the report_id from the given buffer adds this byte 2 times
in the command, leading to a non working command.
Reported-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The last field of the driver_data->leds[] array is used to store the
special toggle for setting all leds simultaneously, so we need to allocate
appropriate number of led_classdev pointers.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We usually group drivers on a per-vendor basis, implementing device-specific
deviations from the standard in vendor-specific driver.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch to the SRW-S1 driver adds the ability to control all
LEDs simultaneously as testing showed that it was slow (noticably!!)
when seting or clearing all the LEDs in turn.
It adds a 'RPMALL' LED, whose behavoir is asserted to all the LEDs in
the bar graph, individual LEDs can subsequently be turned on/off
individually.
Signed-off-by: Simon Wood <simon@mungewell.org>
Tested-by: John Murphy <rosegardener@freeode.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch to the SRW-S1 driver adds support for the LED RPM
meter on the front of the device. The LEDs are controlled via
/sys/class/leds interface, with an individual control for each
of the 15 LEDs.
Signed-off-by: Simon Wood <simon@mungewell.org>
Tested-by: John Murphy <rosegardener@freeode.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch to the SRW-S1 driver re-writes the HID descriptor
to insert a section for the 3 dials on the device, previously
these were contained within a 'Manufacturer Specific' usage
page.
Signed-off-by: Simon Wood <simon@mungewell.org>
Tested-by: John Murphy <rosegardener@freeode.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support the SRW-S1 by patching HID descriptor to read axis
as Generic Desktop X, Y and Z (rather than Usage page being
'Simulation').
Signed-off-by: Simon Wood <simon@mungewell.org>
Tested-by: John Murphy <rosegardener@freeode.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the consolidated GUID definitions in the Hyper-V mouse driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* v4l_for_linus: (464 commits)
[media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures
[media] uvcvideo: Cleanup leftovers of partial revert
[media] uvcvideo: Return -EACCES when trying to set a read-only control
Linux 3.8-rc3
mm: reinstante dropped pmd_trans_splitting() check
cred: Remove tgcred pointer from struct cred
drm/ttm: fix fence locking in ttm_buffer_object_transfer
ARM: clps711x: Fix bad merge of clockevents setup
ARM: highbank: save and restore L2 cache and GIC on suspend
ARM: highbank: add a power request clear
ARM: highbank: fix secondary boot and hotplug
ARM: highbank: fix typos with hignbank in power request functions
ARM: dts: fix highbank cpu mpidr values
ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
drm/prime: drop reference on imported dma-buf come from gem
xen/netfront: improve truesize tracking
ARM: mx5: Fix MX53 flexcan2 clock
ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
sctp: fix Kconfig bug in default cookie hmac selection
EDAC: Cleanup device deregistering path
...
Conflicts:
drivers/media/pci/dm1105/dm1105.c
drivers/media/platform/soc_camera/mx2_camera.c
Document what the fix-up is does and make it more robust by ensuring
that it is only applied to the USB interface that corresponds to the
mouse (sony_report_fixup() is called once per interface during probing).
Cc: linux-input@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID over I2C protocol specification states that when the device is
enumerated from ACPI the HID descriptor address can be obtained by
executing "_DSM" for the device with function 1. Enable this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This variable is initialized conditionally, based on whether a wiimote
call succeeds. However, the logic is not obvious to the compiler so it
throws a warning. Eliminate the warning by initializing "size" to 0.
The warning is:
files/drivers/hid/hid-wiimote-debug.c:69:18: warning: 'size' may be used
uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Simon Que <sque@chromium.org>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for another gamepad to the hid-pl driver. The "color rumble pad
P580" marketed using the "Saitek" brand in Germany, and using a USB Vendor ID
attributed to "Jess" seems to be electronically identical to the 4-field
variant of the "Green Asia" gamepad.
The pad has been tested to support rumble strengths up to 255, not just 127.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch to add the Formosa Industrial Computing, Inc. Infrared Receiver
[IR605A/Q] to hid-ids.h and hid-quirks.c. This IR receiver causes about a 10
second timeout when the usbhid driver attempts to initialze the device. Adding
this device to the quirks list with HID_QUIRK_NO_INIT_REPORTS removes the
delay.
Signed-off-by: Nicholas Santos <nicholas.santos@gmail.com>
[jkosina@suse.cz: fix ordering]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are some Sony clone gamepads that are incompatible
with PS3 since firmware 3.50, as they decided to prevent those
devices to work, without any good technical reason. I was one of those
'blessed' people affected by their niceness with their customers.
Marcelo also has another device with a similar problem.
Perhaps due to Sony's way to block the device, damaging the device's
eeprom, or perhaps because they just have a different, broken Report
descriptor, there are 3 buttons that don't work on both devices
(the ones equivalent to square, round and X).
What it happens is that the descriptor generate weird EV_ABS events
to those buttons, instead of EV_MSC/EV_KEY.
A fix that seems to be enough for them is to return the original
sixaxis table instead of the broken one. That's what this patch
does.
Yet, there are some missing entries at the used keytable. On my
tests, all keys are now producing the right events, but the reported
keycodes look weird:
"square" key: (Button.0010 = 1)
1355524363.460835: event type EV_MSC(0x04): scancode = 0x90010
1355524363.460835: event type EV_KEY(0x01) key_up: BTN_DEAD(0x0001)
"round" key: (Button.000e = 1)
1355524410.908705: event type EV_MSC(0x04): scancode = 0x9000e
1355524410.908705: event type EV_KEY(0x01) key_down: (0x0001)
1355524410.971788: event type EV_MSC(0x04): scancode = 0x9000e
1355524410.971788: event type EV_KEY(0x01) key_up: (0x0001)
"X" key: (Button.000f = 1)
1355524384.880813: event type EV_MSC(0x04): scancode = 0x9000f
1355524384.880813: event type EV_KEY(0x01) key_down: (0x0001)
1355524384.979815: event type EV_MSC(0x04): scancode = 0x9000f
1355524384.979815: event type EV_KEY(0x01) key_up: (0x0001)
The rationale is likely due to those entries at rdesc table, where the
Kernel were not likely able to parse:
Button.000d ---> Key.?
Button.000e ---> Key.?
Button.000f ---> Key.?
Button.0010 ---> Key.BtnDead
Button.0011 ---> Key.?
Button.0012 ---> Key.?
Button.0013 ---> Key.?
As a reference, this is the rdisc used on my clone (a Mad Catz
model 8846):
05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 0d 15 00 25 01 35 00 45 01 05 09 19 01 29 0d 81 02 75 01 95 03 06 00 ff 81 03 05 01 25 07 46 3b 01 75 04 95 01 65 14 09 39 81 42 65 00 75 01 95 0c 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 15 00 15 00 15 00 35 00 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 75 08 95 27 09 01 81 02 75 08 95 30 09 01 91 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0
This is what's returned on Marcelo's device (not sure what is
the brand name of his device):
05 01 09 04 a1 01 a1 02 85 01 75 08 95 01 15 00 26 ff 00 81 03 75 01 95 13 15 00 25 01 35 00 45 01 05 09 19 01 29 13 81 02 75 01 95 0d 06 00 ff 81 03 15 00 26 ff 00 05 01 09 01 a1 00 75 08 95 04 35 00 46 ff 00 09 30 09 31 09 32 09 35 81 02 c0 05 01 95 13 09 01 81 02 95 0c 81 01 75 10 95 04 26 ff 03 46 ff 03 09 01 81 02 c0 a1 02 85 02 75 08 95 30 09 01 b1 02 c0 a1 02 85 ee 75 08 95 30 09 01 b1 02 c0 a1 02 85 ef 75 08 95 30 09 01 b1 02 c0 c0
Reported-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Tested-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use the new module_hid_driver macro in all HID drivers that have
a simple register/unregister init/exit.
This also converts the hid drivers that test for a failure of
hid_register_driver() and report the failure. Using module_hid_driver
in those drivers removes the failure message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pull media updates from Mauro Carvalho Chehab:
- Missing MAINTAINERS entries were added for several drivers
- Adds V4L2 support for DMABUF handling, allowing zero-copy buffer
sharing between V4L2 devices and GPU
- Got rid of all warnings when compiling with W=1 on x86
- Add a new driver for Exynos hardware (s3c-camif)
- Several bug fixes, cleanups and driver improvements
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (243 commits)
[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
[media] omap3isp: Prepare/unprepare clocks before/after enable/disable
[media] omap3isp: preview: Add support for 8-bit formats at the sink pad
[media] omap3isp: Replace printk with dev_*
[media] omap3isp: Find source pad from external entity
[media] omap3isp: Configure CSI-2 phy based on platform data
[media] omap3isp: Add PHY routing configuration
[media] omap3isp: Add CSI configuration registers from control block to ISP resources
[media] omap3isp: Remove unneeded module memory address definitions
[media] omap3isp: Use monotonic timestamps for statistics buffers
[media] uvcvideo: Fix control value clamping for unsigned integer controls
[media] uvcvideo: Mark first output terminal as default video node
[media] uvcvideo: Add VIDIOC_[GS]_PRIORITY support
[media] uvcvideo: Return -ENOTTY for unsupported ioctls
[media] uvcvideo: Set device_caps in VIDIOC_QUERYCAP
[media] uvcvideo: Don't fail when an unsupported format is requested
[media] uvcvideo: Return -EACCES when trying to access a read/write-only control
[media] uvcvideo: Set error_idx properly for extended controls API failures
[media] rtl28xxu: add NOXON DAB/DAB+ USB dongle rev 2
[media] fc2580: write some registers conditionally
...
We should not enter close function while someone else is in open.
This mutex prevents this race.
There is also no need to override the ret value with -EIO in case of
a failure of i2c_hid_set_power.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It should not be necessary to add IDs for HID sensor hubs to lists in
hid-core.c and hid-sensor-hub.c. So instead of a whitelist, autodetect such USB
HID sensor hubs, based on a collection of type physical inside a useage page of
type sensor. If some sensor hubs stil must be usable as raw devices, a
blacklist might be created.
Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: "Pandruvada, Srinivas" <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch against kernel 3.7.0-rc8 fixes a kernel oops when turning on the
bluetooth mouse with id 0458:0058 [1].
The mouse in question supports both input and hid sessions, however it is
blacklisted in drivers/hid/hid-core.c so the input session is one that should
be used. Long ago (around kernel 3.0.0) some changes in the bluetooth
subsystem made the kernel do not fallback to input session when hid session is
not supported or blacklisted. This patch restore that behaviour by making the
kernel try the input session if hid_add_device returns ENODEV.
The patch exports hid_ignore() from hid-core.c so that it can be used in the
bluetooth subsystem.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=39882
Signed-off-by: Lamarque V. Souza <lamarque@gmail.com>
Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ret_count has to be at least 3, as we have to count the 2 bytes that are used
for the size of the reply. Without this, memcpy() might be called with zero or
negative count.
Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous memcpy implementation relied on the size advertized by the
device. There were no guarantees that buf was big enough.
Some gymnastic is also required with the +2/-2 to take into account
the first 2 bytes of the returned buffer where the total returned
length is supplied by the device.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no point in keeping the irq in i2c_hid as it's already
there in client.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Simplifies i2c_hid_alloc_buffers tests, and makes this function
responsible of the assignment of ihid->bufsize.
The condition for the reallocation in i2c_hid_start is then simpler.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID descriptors contains 4 bytes of reserved field.
The previous implementation was overriding the next fields in struct i2c_hid.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The pointless WARN_ON() has been removed from i2c_hid_remove(),
so we don't need bug.h any more.
Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ihid can not be null, so there are no reasons to test it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If i2c_hid_get_report fails, exit i2c_hid_init_report.
The printk log is already called by i2c_hid_get_report, so no need
to add some more printks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the case where the hid driver in charge of handling the hid part
of the device (hid-generic for instance) fails at probe, neither
i2c_hid_start nor i2c_hid_stop are called.
Thus, the buffers allocated in i2c_hid_probe are never freed.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Forwards appropriate return values.
As noone use the error returned by i2c_hid_get_input, let's make it
returning void.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These definitions are not used here, but are defined by the specification.
Keeping some of them for documentation purposes.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This avoids the problematic case:
if (condition)
i2c_hid_dbg(ihid, "Blah blah %d\n", i);
else
do_something_very_important();
Which looks correct, however with the previous macro definition,
this expands to the unexpected:
if (condition) {
if (debug) \
dev_printk(KERN_DEBUG, &ihid->client->dev,
"Blah blah %d\n", i);
else
do_something_very_important();
}
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We should not initialize to 0 static declarations.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The "comment" part can never be displayed, so we can remove it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
no I2C driver has "i2c" in its name. It makes more sense to call this
i2c driver "hid".
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 0a97e1e9f9 ('HID: apple: Add Apple wireless keyboard 2011 ANSI PID')
did not update the special driver list in hid-core.c, so hid-generic may
still bind to this device.
Reported-by: Ari Pollak <ari@scvngr.com>
References: http://bugs.debian.org/694546
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This just refactors the allocation of hid_input.
No semantic changes.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes sending SIGIO from hidraw_report_event by creating a fasync
handler which adds the fasync entry.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* linus/master: (1428 commits)
futex: avoid wake_futex() for a PI futex_q
watchdog: using u64 in get_sample_period()
writeback: put unused inodes to LRU after writeback completion
mm: vmscan: check for fatal signals iff the process was throttled
Revert "mm: remove __GFP_NO_KSWAPD"
proc: check vma->vm_file before dereferencing
UAPI: strip the _UAPI prefix from header guards during header installation
include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID
Linux 3.7-rc7
powerpc/eeh: Do not invalidate PE properly
ALSA: hda - Fix build without CONFIG_PM
of/address: sparc: Declare of_iomap as an extern function for sparc again
PM / QoS: fix wrong error-checking condition
bnx2x: remove redundant warning log
vxlan: fix command usage in its doc
8139cp: revert "set ring address before enabling receiver"
MPI: Fix compilation on MIPS with GCC 4.4 and newer
MIPS: Fix crash that occurs when function tracing is enabled
MIPS: Merge overlapping bootmem ranges
jbd: Fix lock ordering bug in journal_unmap_buffer()
...
When the file has been open in non-blocking mode, EIO or ERESTARTSYS
would never be returned even if they should (for example when device
has been unplugged, you want EIO and not EAGAIN to be returned).
Move the O_NONBLOCK check after other checks have been performed.
Base on similar patch done to hidraw by
Founder Fang <founder.fang@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB recovery mode present in i.MX23 ROM emulates USB HID. It needs this
quirk to behave properly.
Even if the official branding of the chip is Freescale i.MX23, I named it
Sigmatel STMP3780 since that's what the chip really is and it even reports
itself as STMP3780.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When nonblock read the condition check (file->f_flags & O_NONBLOCK) always be
true, signal_pending and device exist checking never get a chance to run, so
the user mode code always get EAGAIN even if device removed. move nonblock mode
checking to the last can fix this problem.
Signed-off-by: Founder Fang <founder.fang@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support to Novatec wireless mouse (device ID 0603:1602).
Fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=47031
Signed-off-by: Marco Biscaro <marcobiscaro2112@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case we are returning from i2c_hid_probe() through the 'err' or
'err_mem_free' labels, there is noone freeing the buffers allocated by
i2c_hid_alloc_buffers().
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
report cannot be NULL, fortunately as we use it before we check !
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft published the protocol specification of HID over i2c:
http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
This patch introduces an implementation of this protocol.
This implementation does not includes the ACPI part of the specification.
This will come when ACPI 5.0 devices enumeration will be available.
Once the ACPI part is done, OEM will not have to declare HID over I2C
devices in their platform specific driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
More thorough testing revealed a typo in last koneplus cleanups.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fix from Jiri Kosina:
"This has a build fix for architectures where memcmp() is macro, from
Jiri Slaby"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: microsoft: do not use compound literal - fix build
No need to check whether unsigned variable is less than 0.
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-usb@vger.kernel.org
CC: linux-input@vger.kernel.org
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Win 8 protocol specify the fact that each valid touch must be reported
within a frame until it is released.
We can therefore use the always_valid quirk and dismiss reports when we see
duplicate contacts ID.
We recognize Win8 certified devices from their vendor feature 0xff0000c5
where Microsoft put a signed blob in the report to check if the device
passed the certification.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Win8 devices supporting hovering must provides InRange HID field.
The information that the finger is here but is not touching the surface
is sent to the user space through ABS_MT_DISTANCE as required by the
multitouch protocol.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This quirk allows a device to reuse a contact id when sending garbage
inactive contacts at the end of a report.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Win 8 device specification changed the requirements for the hid usages
of the multitouch devices. Now InRange is optional and must be only
used when the device supports hovering.
This ensures that the quirk ALWAYS_VALID is taken into account and
also ensures its precedence over the other VALID* quirks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Win8 input specification clarifies the X and Y sent by devices.
It distincts the position where the user wants to Touch (T) from
the center of the ellipsoide (C). This patch enable supports for this
distinction in hid-multitouch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Win8 devices are required to present the feature "Maximum Contact Number".
Fortunately all win7 devices I've seen presents this feature.
If the current value is 0, then, the driver can get the actual supported
contact count by refering to the logical_max.
This win8 specification ensures that logical_max may not be above 250.
This also allows us to detect when devices like irtouch or stantum reports
an obviously wrong value of 255.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Win8 certification introduced the ability to transmit two X and two Y per
touch. The specification precises that it must be used in an array.
This test guarantees that we split the touches on the last element
in this array.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, there is no way to know the index of the current field
in the .input_mapping and .event callbacks when this field is inside
an array of HID fields.
This patch adds this index to the struct hid_usage so that this
information is available to input_mapping and event callbacks.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID spec details special values for the HID field unit exponent.
Basically, the range [0x8..0xf] correspond to [-8..-1], so this is
a standard two's complement on a half-byte.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidinput_calc_abs_res should return the closest int in the division
instead of the floor.
On a device with a logical_max of 3008 and a physical_max of 255mm,
previous implementation gave a resolution of 11 instead of 12.
With 11, user-space computes a physical size of 273.5mm and the
round_closest results gives 250.6mm.
The old implementation introduced an error of 2cm in this example.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Exporting the function allows us to calculate the resolution in third
party drivers like hid-multitouch.
This patch also complete the function with additional valid axes.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In patch "HID: microsoft: fix invalid rdesc for 3k kbd" I fixed
support for MS 3k keyboards. However the added check using memcmp and
a compound statement breaks build on architectures where memcmp is a
macro with parameters.
hid-microsoft.c:51:18: error: macro "memcmp" passed 6 arguments, but takes just 3
On x86_64, memcmp is a function, so I did not see the error.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduced attribute "control" and made profile_settings and profile_buttons
readable, which makes profile[1-5]_settings and profile[1-5]_buttons obsolete.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduced attribute "control" and made profile_settings and profile_buttons
readable, which makes profile[1-5]_settings and profile[1-5]_buttons obsolete.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduced attribute "control" and made profile_settings and profile_buttons
readable, which makes profile[1-5]_settings and profile[1-5]_buttons obsolete.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Isku needs an extra sysfs attr to support device reset.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removed unneeded structures from header.
Using enums instead of sizeof(struct) to unify drivers.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Partially removed unneeded informations and data caching.
Moved code nearer to format of newer drivers.
Added "info" sysfs attribute to support device reset and deprecate
"firmware_version" attribute.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Partially removed unneeded informations and data caching.
Moved code nearer to format of newer drivers.
Added "info" sysfs attribute to support device reset and deprecate other attributes.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fix from Jiri Kosina:
"This reverts a patch that causes regression in binding between HID
devices and drivers during device unplug/replug cycle."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hidraw: put old deallocation mechanism in place
Previously, both usbhid and usbtouchscreen would bind to D-WAV devices
with class HID and protocol None, so they would be claimed by whichever
driver was loaded first. Some of these devices do in fact work with
usbhid, but not all of them do. OTOH they all work with usbtouchscreen
as of commit 037a833ed0 ("Input:
usbtouchscreen - initialize eGalax devices"). So we ignore them in
usbhid to prevent getting in the way of usbtouchscreen and claiming an
interface that we may not be able to do anything useful with.
Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removed caching of profile data which lowers memory footprint,
speeds up init and fixes problems with device reset.
Removed unnecessary infos in header.
Code moved nearer to format of newer drivers.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Device can be reset to factory state by sending a command via info sysfs attr.
Added binary attribute info for this purpose, which obsoletes firmware_version
attribute.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Device can be reset to factory state by sending a command via info sysfs attr.
Changed from ro to rw to enable this feature.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
KoneXTD is just a Kone[+] with updated sensor, so it's handled by
koneplus driver.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set APPLE_ISO_KEYBOARD flag on USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO so we get
the ISO translation on German keyboards for the MacBook4,1 as well.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This basically reverts commit 4fe9f8e203. It causes multiple problems,
namely:
- after rmmod/modprobe cycle of bus driver, the input is not claimed any
more. This is likely because of misplaced hid_hw_close()
- it causes memory corruption on hidraw_list
As original patch author is not responding to requests to fix his patch,
and the original deallocation mechanism is not exposing any problems, I
am reverting back to it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
"This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new
device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic
multitouch code fix from Alan Cox."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Add support for the MacBook Pro 10,2 keyboard / touchpad
HID: multitouch: fix maxcontacts problem on GeneralTouch
HID: multitouch: put the case in the right switch statement
HID: microsoft: fix invalid rdesc for 3k kbd
Button names for USB gamepads are currently assigned incorrectly, as the evdev
code assigned to buttons is "BTN_GAMEPAD + code", which on devices with more
then 16 buttons bleeds over into button names reserved for graphic tablets
(BTN_TOOL_PEN, etc.). This causes problems further down the line as the device
are now no longer detected as joystick. This patch fixes that by assigning
buttons outside the range to BTN_TRIGGER_HAPPY (as is already the case for USB
joysticks).
Furthermore this patch corrects the assignment to BTN_TRIGGER_HAPPY, as
currently the first button over 16 is assigned to BTN_TRIGGER_HAPPY17 (i.e.
BTN_TRIGGER_HAPPY+0x10) not BTN_TRIGGER_HAPPY.
Signed-off-by: Ingo Ruhnke <grumbel@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a driver for the ION iCade mini arcade cabinet [1]. The device generates a
key press and release for each joystick movement or button press or release.
For example, moving the stick to the left will generate the "A" key being
pressed and then released.
A list of all the combinations is available in the iCade developer guide [2].
This driver hides all this and makes the device work as a generic joystick.
[1]: http://www.ionaudio.com/products/details/icade
[2]: http://www.ionaudio.com/downloads/iCade_Dev_Resource_v1.3.pdf
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This enables the existing drivers for keyboard and touchpad with the new
USB IDs found on the MBP 13" Reasonable Resolution (also known as the
Retina Display).
Added entries to both keyboard and mouse ignore lists.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix maxcontacts problem for PWT GeneralTouch multi-touchscreen.
Our device didn't contain HID_DG_CONTACTMAX usage. This usage use to describe
touchscreen's maxcontacts for hid-multitouch.c to get maxcontacts automatic. We
fix the device that driver can get maxcontact from our device, hence it doesn't
need .maxcontact=10. Now there is just one device class can fix all our PWT
touchscreen.
Signed-off-by: Xianhan Yu <aroundight77@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft Digital Media Keyboard 3000 has two interfaces, and the
second one has a report descriptor with a bug. The second collection
says:
05 01 -- global; usage page -- 01 -- Generic Desktop Controls
09 80 -- local; usage -- 80 -- System Control
a1 01 -- main; collection -- 01 -- application
85 03 -- global; report ID -- 03
19 00 -- local; Usage Minimum -- 00
29 ff -- local; Usage Maximum -- ff
15 00 -- global; Logical Minimum -- 0
26 ff 00 -- global; Logical Maximum -- ff
81 00 -- main; input
c0 -- main; End Collection
I.e. it makes us think that there are all kinds of usages of system
control. That the keyboard is a not only a keyboard, but also a
joystick, mouse, gamepad, keypad, etc. The same as for the Wireless
Desktop Receiver, this should be Physical Min/Max. So fix that
appropriately.
References: https://bugzilla.novell.com/show_bug.cgi?id=776834
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
tcu sysfs attr was used to only control calibration process so far. Direct
sensor register access possibility has been revealed. Allowing readout of tcu
permits usage of this feature.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Roccat Lua gaming mouse.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull workqueue changes from Tejun Heo:
"This is workqueue updates for v3.7-rc1. A lot of activities this
round including considerable API and behavior cleanups.
* delayed_work combines a timer and a work item. The handling of the
timer part has always been a bit clunky leading to confusing
cancelation API with weird corner-case behaviors. delayed_work is
updated to use new IRQ safe timer and cancelation now works as
expected.
* Another deficiency of delayed_work was lack of the counterpart of
mod_timer() which led to cancel+queue combinations or open-coded
timer+work usages. mod_delayed_work[_on]() are added.
These two delayed_work changes make delayed_work provide interface
and behave like timer which is executed with process context.
* A work item could be executed concurrently on multiple CPUs, which
is rather unintuitive and made flush_work() behavior confusing and
half-broken under certain circumstances. This problem doesn't
exist for non-reentrant workqueues. While non-reentrancy check
isn't free, the overhead is incurred only when a work item bounces
across different CPUs and even in simulated pathological scenario
the overhead isn't too high.
All workqueues are made non-reentrant. This removes the
distinction between flush_[delayed_]work() and
flush_[delayed_]_work_sync(). The former is now as strong as the
latter and the specified work item is guaranteed to have finished
execution of any previous queueing on return.
* In addition to the various bug fixes, Lai redid and simplified CPU
hotplug handling significantly.
* Joonsoo introduced system_highpri_wq and used it during CPU
hotplug.
There are two merge commits - one to pull in IRQ safe timer from
tip/timers/core and the other to pull in CPU hotplug fixes from
wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."
Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.
Tejun pointed out a few of them, I fixed a couple more.
* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
workqueue: remove @delayed from cwq_dec_nr_in_flight()
workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
workqueue: use __cpuinit instead of __devinit for cpu callbacks
workqueue: rename manager_mutex to assoc_mutex
workqueue: WORKER_REBIND is no longer necessary for idle rebinding
workqueue: WORKER_REBIND is no longer necessary for busy rebinding
workqueue: reimplement idle worker rebinding
workqueue: deprecate __cancel_delayed_work()
workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
workqueue: use mod_delayed_work() instead of __cancel + queue
workqueue: use irqsafe timer for delayed_work
workqueue: clean up delayed_work initializers and add missing one
workqueue: make deferrable delayed_work initializer names consistent
workqueue: cosmetic whitespace updates for macro definitions
workqueue: deprecate system_nrt[_freezable]_wq
workqueue: deprecate flush[_delayed]_work_sync()
...
Here is the big staging tree update for the 3.7-rc1 merge window.
There are a few patches in here that are outside of the staging area,
namely HID and IIO patches, but all of them have been acked by the
relevant subsystem maintainers. The IIO stuff is still coming in
through this tree as it hasn't entirely moved out of the staging tree,
but is almost there.
Other than that, there wa a ton of work on the comedi drivers to make
them more readable and the correct style. Doing that removed a lot of
code, but we added a new driver to the staging tree, so we didn't end up
with a net reduction this time around:
662 files changed, 51649 insertions(+), 26582 deletions(-)
All of these patches have been in the linux-next tree already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlBp32YACgkQMUfUDdst+ymU5QCgm8KWB+dAO8ZFbmzhhm3C0VFl
wB0AoKbDj/tCiUHkJ70u/i3OHueKkpet
=ut2/
-----END PGP SIGNATURE-----
Merge tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree update from Greg Kroah-Hartman:
"Here is the big staging tree update for the 3.7-rc1 merge window.
There are a few patches in here that are outside of the staging area,
namely HID and IIO patches, but all of them have been acked by the
relevant subsystem maintainers. The IIO stuff is still coming in
through this tree as it hasn't entirely moved out of the staging tree,
but is almost there.
Other than that, there wa a ton of work on the comedi drivers to make
them more readable and the correct style. Doing that removed a lot of
code, but we added a new driver to the staging tree, so we didn't end
up with a net reduction this time around:
662 files changed, 51649 insertions(+), 26582 deletions(-)
All of these patches have been in the linux-next tree already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'staging-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1094 commits)
staging: comedi: jr3_pci: fix iomem dereference
staging: comedi: drivers: use comedi_fc.h cmdtest helpers
Staging: winbond: usb_free_urb(NULL) is safe
Staging: winbond: checkpatch cleanup
Staging: winbond: Removed undesired spaces, lines and tabs
Staging: winbond: Typo corrections in comments
Staging: winbond: Changed c99 comments to c89 comments
staging: r8712u: Do not queue cloned skb
staging: comedi: ni_mio_common: always lock in ni_ai_poll()
staging: comedi: s626: add FIXME comment
staging: comedi: s626: don't dereference insn->data
staging: comedi: s526: fix if() check in s526_gpct_winsn()
staging: comedi: s626: cleanup comments in s626_initialize()
staging: comedi: s626: remove clear of kzalloc'ed data
staging: comedi: s626: remove 'WDInterval' from private data
staging: comedi: s626: remove 'ChargeEnabled' from private data
staging: comedi: s626: remove 'IsBoardRevA' comment
staging: comedi: s626: #if 0 out the "SAA7146 BUG WORKAROUND"
staging: comedi: s626: remove 'allocatedBuf' from private data
staging: comedi: s626: add final attach message
...
When a device is unplugged, wait for all processes that have opened the device
to close before deallocating the device.
Signed-off-by: Ratan Nalumasu <ratan@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.
His change got lost while splitting hid_picolcd.c, restore it.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the touch-up no response problem on GeneralTouch twofingers touchscreen and
modify the driver for new GeneralTouch PWT touchscreen.
Signed-off-by: Xianhan Yu <aroundight77@gmail.com>
Reviewed-by Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Sony PS3 Blue-ray Disc Remote Control used to be supported by the
BlueZ project's user space, but the code that handled it was recently
removed as its functionality conflicted with a real HSP implementation
and the mapping was thought to be better handled in the kernel. This is
a port of the mapping logic from the fakehid driver by Marcel Holtmann
to the in-kernel HID layer.
We also add support for the Logitech Harmony Adapter for PS3, which
emulates the BD Remote.
Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The dev_rdesc member of the hid_device structure is meant to store the original
report descriptor received from the device, but it is currently passed to any
report_fixup method before it is copied to the rdesc member. This patch uses a
temporary buffer to shield dev_rdesc from the side effects of many HID drivers'
report_fixup implementations.
usbhid's hid_post_reset checks the report descriptor currently returned by the
device against a descriptor that may have been modified by a driver's
report_fixup method. That leaves some devices nonfunctional after a resume, with
a "reset_resume error 1" reported. This patch checks the new descriptor against
the unmodified dev_rdesc instead and uses the original, instead of modified,
report size.
BugLink: http://bugs.launchpad.net/bugs/1049623
Signed-off-by: Kevin Daughtridge <kevin@kdau.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The lg4ff driver doesn't fill the "input_absinfo" struct so it is left
with default values. Applications with rely on information in this struct
therefore do not work correctly with the wheel.
Other Logitech wheels probably need this fix too, but again I do not have
enough information to write it.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Range limiting command for the Driving Force Pro wheel is only a FF_SPRING
effect so that the wheel creates resistance when the user tries to turn it past
the limit. It is however possible to overpower the FFB motors quite easily which
leads to the X axis value exceeding the expected limit. This confuses
games which dynamically adjust calibration using the highest/lowest min and max
values reported by the wheel. Joydev device driver also doesn't take in account
any changes in an axis range after the joystick device is created.
This patch recalculates received ABS_X axis value so it is always in
<0; 16383> range where 0 is the left limit and 16383 the right limit.
Logitech driver for Windows does the same thing. As for any concerns about
possible loss of precision, I compared a large set of raw/adjusted values
generated by "mult_frac" to values returned by the Windows driver and I got
a 100% match.
Other Logitech wheels will probably need a similar fix, but I currently lack
the information needed to write one.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch replaces all occurrences of "report->field[0]->value[n]" with just
"value[n]" to get rid of the lengthy trains we have now.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since something will be divided by these variables in
show_min_width()/show_min_height() and show_activate_width()/
show_activate_height(), a divided error would be triggered if
they are zero.
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Acked-by: Rafi Rubin <rafi@seas.upenn.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure we keep enough space for terminating NUL character after last
newline. If we have too much data, replace last byte with '.'s to
make overflow visible.
Using hex_dump_to_buffer() is not interesting as it adds more overhead
and does not append the trailing linefeed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix below issues:
1. In the case of goto err_close, hid_hw_stop(hdev) is called twice. Fix it.
2. If fails to allocate MFD device name, we also need to free all
successfully allocated names in previous iterations.
3. In sensor_hub_remove(), Call hid_hw_close() before hid_hw_stop().
4. Adjust unnecessary change lines for hid_err.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Current implementation of hid_hw_start() allows connect_mask to be 0.
Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start()
is not necessary. Remove it.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This patch fixes an issue introduced after commit 4ea5454203
("HID: Fix race condition between driver core and ll-driver").
After that commit, hid-core discards any incoming packet that arrives while
hid driver's probe function is being executed.
This broke the enumeration process of hid-logitech-dj, that must receive
control packets in-band with the mouse and keyboard packets. Discarding mouse
or keyboard data at the very begining is usually fine, but it is not the case
for control packets.
This patch forces a re-enumeration of the paired devices when a packet arrives
that comes from an unknown device.
Based on a patch originally written by Benjamin Tissoires.
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to kfree names for led_mute and led_micmute in tpkbd_remove_tp().
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Bernhard Seibold <mail@bernhard-seibold.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull Input and HID updates for 3.7 from Henrik Rydberg:
"The tree contains input core changes, Acked by Dmitry, which substantially
reduces the irqsoff latency for all input devices. It also contains MT changes
which allows further memory reduction, speedup and hardware support in the HID
Multitouch driver. Lastly, you get the conversion of the bcm5974 driver to
MT-B, which due to the mixed dependency of the tree fits better here than
anywhere else."
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the Flatfrog Multitouch 3200 panel. This panel
advertises some fields that it does not use, hence the new quirk.
Cc: Pablo Cases <pablo.cases@flatfrog.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Some devices report the number of contacts via the unreliable
CONTACTCOUNT usage, rather than using the CONTACTMAX feature.
Without this patch, the 3M devices are constrained to the default
maximum of ten fingers.
Cc: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
With the input_mt_sync_frame() function in place, there is no longer
any need to keep the full touch state in the driver. This patch
removes the slot state and replaces the lookup code with the input-mt
equivalent.
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
With the input_configured() callback in place, the setup and frame
synchronization can be simplified. The input device initialization is
moved to mt_input_configured(), to make sure the full HID report has been
seen.
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
A hid device may create several input devices, and a driver may need
to prepare or finalize the configuration per input device. Currently,
there is no sane way for a driver to know when a device has been
configured. This patch adds a callback providing that information.
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: Ping Cheng <pingc@wacom.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Preparing to move more repeated code into the mt core, add a flags
argument to the input_mt_slots_init() function.
Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Tested-by: Ping Cheng <pingc@wacom.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Current implementation of hid_hw_start() allows connect_mask to be 0.
Setting hdev->claimed = HID_CLAIMED_INPUT before calling hid_hw_start() is not
necessary. Remove it.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-By: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 4ea5454203
[HID: Fix race condition between driver core and ll-driver] introduced
new locking around probe/remove functions that prevents any report/reply
from hardware to reach driver until it returned from probe.
As such, the ask-reply way to checking picoLCD firmware version during
probe is bound to timeout and let probe fail.
Drop the check to let driver successfully probe again (until locking issues
are resolved allowing to reinstate the check).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
OLEDs/LED are not critical for tablet functioning thus ignore OLED/LED
initialisation failures.
This patch does clean up all the sysfs attribute files in error paths.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
"report_id" is unsigned so it's never less than zero. These checks can
be removed without any problem.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
We're holding a spinlock here so we can't call kmalloc() with
GFP_KERNEL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Roccat devices are standard compatible, specific drivers are only needed
for extended functionality.
If Roccat drivers are not configured, hid-generic binds these devices now.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The raw pressure-data that is reported by balance-boards is pretty useless
unless calibration data is applied. Therefore, we read the full
calibration data on extension initialization and apply it to every
reported data.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Nintendo Balance-Board is a controller which behaves exactly like the
Wii Remote but reports all its data through a special extension device.
Hence, we can simply add the Balance-Board as extension device and we get
full support for it.
Tested-by: Florian Echtler <floe@butterbrot.org>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
container_of() never returns NULL, thus also remove the NULL checking for it.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This pulls in the staging tree fixes in 3.6-rc6 into our branch to resolve the
merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code missed the definition for picolcd_debug_out_report, but add
definition for picolcd_debug_raw_event twice.
This patch fixes below build error:
CC [M] drivers/hid/hid-picolcd_core.o
In file included from drivers/hid/hid-picolcd_core.c:34:0:
drivers/hid/hid-picolcd.h:176:20: error: redefinition of 'picolcd_debug_raw_event'
drivers/hid/hid-picolcd.h:162:20: note: previous definition of 'picolcd_debug_raw_event' was here
make[2]: *** [drivers/hid/hid-picolcd_core.o] Error 1
make[1]: *** [drivers/hid] Error 2
make: *** [drivers] Error 2
if CONFIG_DEBUG_FS is unset.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch complains that the NULL checking in this function is not
consistent and could lead to a NULL dereference. The comments say that
we should return here if rc_dev is NULL so I've changed the test to
match the comment.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
"It contains a fix for Eaton Ellipse MAX UPS from Alan Stern,
performance improvement (not processing debug data if noone is
interested), by Henrik Rydberg, and allowing tpkbd-driven devices to
work even with generic driver in a crippled mode, by Andres Freund."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured
HID: Only dump input if someone is listening
HID: add NOGET quirk for Eaton Ellipse MAX UPS
c1dcad2d32 added a new driver configured by
HID_LENOVO_TPKBD but made the hid_have_special_driver entry non-optional which
lead to a recognized but non-working device if the new driver wasn't
configured (which is the correct default).
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The px_probe() and px_remove() functions do not have any special initialization
and cleanup. Remove them and let HID core handle the default probe/remove
actions.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The waltop_probe() and waltop_remove() functions do not have any special
initialization and cleanup. Remove them and let HID core handle the default
probe/remove actions.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adding processing for HID Sensor usage table as defined by
HID 1.12, Request #: HUTRR39, dated 05 May, 2011.
This driver uses HID driver framework to register, send and
receive events.
This uses MFD framework, so that actual processing for a
specific usage id can be done in a different driver. For
example an accelerometer driver can be a separate driver and
use the interface provided by this driver to register for
events.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Adding Intel and STM sensor hub in the list of drivers with
specialized driver.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Allocate a structure not a pointer to it !
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The first payload byte indicates how many IR data bytes are following, not
including itself. The IR data bytes appear in pairs as they represent a
series of 16bit intervals.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Matthieu CASTET adjusted picolcd_debug_out_report() to only operate when
there is an active listener on debugfs for events.
Do the same on the more important picolcd_debug_raw_event() that is
called in interrupt context as opposed to picolcd_debug_out_report()
which happens in whichever context that sends reports to device.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Implement support for picoLCD's CIR header using RC_CORE for decoding
the IR event stream.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Split out all FB related data out of struct picolcd_data into a struct
picolcd_fb_data that is allocated with fb_info. This way fb_info may
cleanly outlive struct picolcd_data for as long as needed for its last
user to drop his reference.
Access to struct picolcd_data is now protected with struct
picolcd_fb_data's lock and tile update reports are only generated
while picolcd_fbdata->picolcd is not NULL and is not marked as failed
(which indicates unplug in progress).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Driver code expects to get access to struct picolcd_data from hiddev
and is not prepared to find a NULL pointer there. Most prominent
candidate to trip on it is picolcd_fb_deferred_io().
Delay removing struct picolcd_data from hiddev until all sub-devices
have been unregistered.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Paul Walmsley has implemented dynamic quirk handling back in 2007 through
commits:
2eb5dc30eb ("USB HID: encapsulate quirk handling into hid-quirks.c")
8222fbe67c ("USB HID: clarify static quirk handling as squirks")
8cef908235 ("USB HID: add support for dynamically-created quirks")
876b9276b9 ("USB HID: add 'quirks' module parameter")
and as such, his copyright rightly belongs to
drivers/hid/usbhid/hid-quirks.c file.
However when generic HID code has been converted to bus and individual
quirks separated out to individual drivers on the bus, the copyright has
been blindly transfered into all the tiny drivers, which actually don't
contain any of Pauls' copyrighted code.
Remove the copyright from those sub-drivers.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Paul Walmsley <paul@pwsan.com>
HID_LOGITECH_DJ uses "default m", which enables it in default kernel
builds. Since this module just enables extra, non-critical
functionality for one particular piece of hardware (specifically,
differentiating multiple wireless keyboards and mice as separate input
devices rather than treating them as one device), and the hardware works
just fine with the default USB HID support, drop the "default m".
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Update the comment of hid_have_special_driver[] field to reflect the fact
that multitouch devices don't need to be present there.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Going through the motions of printing the debug message information
takes a long time; using the keyboard can lead to a 160 us irqsoff
latency. This patch skips hid_dump_input() when there are no open
handles, which brings latency down to 100 us.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for UC-Logic Tablet TWHA60.
It is known to be sold as Genius EasyPen M610 and Monoprice MP1060-HA60.
As this tablet has several variations with different number and different
assignments of frame buttons, they are simply mapped to F1-F24 range and are
left for users to remap in userspace.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since commit a7197c2e, the raw report descriptor is available also for
unclaimed devices. This patchs make it show in the rdesc debugfs node.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For some reason, we had two IDs for the QUANTA 3001 touchscreen controller,
one USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001 and one
USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN. As this has caused
confusion, remove USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN
completely, and fix places where it was used to refer to
USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001.
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS
device. (The USB IDs were already present in hid-ids.h, apparently
under a different name.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Laurent Bigonville <l.bigonville@edpnet.be>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fix from Jiri Kosina:
"Fix for one particular device not being properly claimed by
hid-multitouch driver"
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Remove QUANTA from special drivers list
This QUANTA device is driven by the generic hid-multitouch.ko driver, and
therefore shouldn't be in the special drivers list.
This has been an oversight in 4fa3a58 ("HID: hid-multitouch: Switch to
device groups").
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
m68k/allmodconfig:
drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_reset_write’:
drivers/hid/hid-picolcd_debugfs.c:54: error: implicit declaration of function ‘copy_from_user’
drivers/hid/hid-picolcd_debugfs.c: In function ‘picolcd_debug_eeprom_read’:
drivers/hid/hid-picolcd_debugfs.c:112: error: implicit declaration of function ‘copy_to_user’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
system_nrt[_freezable]_wq are now spurious. Mark them deprecated and
convert all users to system[_freezable]_wq.
If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant, so there's no reason to use system_nrt[_freezable]_wq.
Please use system[_freezable]_wq instead.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-By: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Howells <dhowells@redhat.com>
flush[_delayed]_work_sync() are now spurious. Mark them deprecated
and convert all users to flush[_delayed]_work().
If you're cc'd and wondering what's going on: Now all workqueues are
non-reentrant and the regular flushes guarantee that the work item is
not pending or running on any CPU on return, so there's no reason to
use the sync flushes at all and they're going away.
This patch doesn't make any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Mattia Dongili <malattia@linux.it>
Cc: Kent Yoder <key@linux.vnet.ibm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Avi Kivity <avi@redhat.com>
Fixes thes build errors:
drivers/hid/hid-picolcd_fb.c: In function 'picolcd_fb_destroy':
drivers/hid/hid-picolcd_fb.c:350:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
drivers/hid/hid-picolcd_fb.c: In function 'picolcd_init_framebuffer':
drivers/hid/hid-picolcd_fb.c:508:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration]
drivers/hid/hid-picolcd_fb.c:508:12: warning: assignment makes pointer from integer without a cast [enabled by default]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Several improvements in error handling:
- do not report success if alloc_chrdev_region() failed
- check for error code of cdev_add()
- use unregister_chrdev_region() instead of unregister_chrdev()
if class_create() failed
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add ELAN production request when resume.
Some Elan legacy devices require SET_IDLE to be set on resume.
It should be safe to send it to other devices too.
Tested on 3M, Stantum, Cypress, Zytronic, eGalax, and Elan panels.
Suggested by Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Scott Liu <scott.liu@emc.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A null test was left behind during the autoloading work;
the test was introduced by 8d179a9e, but was never completely
reverted.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB recovery mode present in i.MX28 ROM emulates USB HID.
It needs this quirk to behave properly.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chen Peter <B29397@freescale.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Kosina <jkosina@suse.cz>
[jkosina@suse.cz: fix alphabetical ordering]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Freescale i.MX28 BootROM USB recovery mode implements the USB HID
protocol, yet the global item tag report size is 128. Linux checks if
this is 96 as of now, see [1]. This causes Linux to refuse to communicate
with this device, making it impossible to use the recovery mode.
This is not a standard HID device per se, but rather a software emulation
implemented within the BootROM code and realized through USB OTG-capable
port switched to device mode present on the device.
Previous attempt to discuss this issue dates back to 2011, see [2]. There
has been not much response. Also noteworthy is the [3], where there seems
to be a pointing device that has issue similar to this one.
The tool making use of the USB recovery mode is available at [4].
[1] http://comments.gmane.org/gmane.linux.kernel.input/22328
[2] http://www.spinics.net/lists/linux-usb/msg43463.html
[3] https://bbs.archlinux.org/viewtopic.php?pid=1141340
[4] http://git.bfuser.eu/?p=marex/mxsldr.git;a=summary
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chen Peter <B29397@freescale.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Thsi patch adds ability to control OLED micro displays on Wacom Intuos4
Wireless. The OLEDS are exposed as
/sys/class/hidraw/hidraw*/device/oled{No]_img
where No. is 0 to 7
Setting an image:
dd bs=256 if=img_file of=/sys/class/hidraw/hidraw{No}/device/oled0_img
The image has to contain 256 bytes (64x32px 1 bit). More detailed
description in Documentation/ABI/testing/sysfs-driver-wacom
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Intuos4 WL leds have 2 states: high and low. With no activity tablet
uses low state; using pen triggers high state. Both can be set
independently, but it would require setting another led device to
control them separately. This patch uses the brightness set through leds
subsytem as high and half of that value as low.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stop earlier attempting to submit new reports/URBs (though locking and
usbhid still prevents to bail out early enough to not produce multiple
hid-picolcd 0003:04D8:C002.0003: usb_submit_urb(out) failed: -19
messages in kernel log.
Strengthen framebuffer removal to be less racy.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
WARNING: static const char * array should probably be static const char * const
+static const char *error_codes[] = {
WARNING: min() should probably be min_t(size_t, 20, s)
+ raw_data[2] = min((size_t)20, s);
Note: the second min_t suggestion cannot be followed because GCC is not
smart enough to track constants through it and make
copy_from_user_overflow() check happy.
WARNING: min() should probably be min_t(u8, 20, raw_data[2])
+ if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2])))
return -EFAULT;
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In order to make code maintenance easier, split the vairous
functions into individial files (this removes a bunch of #ifdefs).
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull second set of media updates from Mauro Carvalho Chehab:
- radio API: add support to work with radio frequency bands
- new AM/FM radio drivers: radio-shark, radio-shark2
- new Remote Controller USB driver: iguanair
- conversion of several drivers to the v4l2 core control framework
- new board additions at existing drivers
- the remaining (and vast majority of the patches) are due to
drivers/DocBook fixes/cleanups.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits)
[media] radio-tea5777: use library for 64bits div
[media] tlg2300: Declare MODULE_FIRMWARE usage
[media] lgs8gxx: Declare MODULE_FIRMWARE usage
[media] xc5000: Add MODULE_FIRMWARE statements
[media] s2255drv: Add MODULE_FIRMWARE statement
[media] dib8000: move dereference after check for NULL
[media] Documentation: Update cardlists
[media] bttv: add support for Aposonic W-DVR
[media] cx25821: Remove bad strcpy to read-only char*
[media] pms.c: remove duplicated include
[media] smiapp-core.c: remove duplicated include
[media] via-camera: pass correct format settings to sensor
[media] rtl2832.c: minor cleanup
[media] Add support for the IguanaWorks USB IR Transceiver
[media] Minor cleanups for MCE USB
[media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry
[media] Use a named union in struct v4l2_ioctl_info
[media] mceusb: Add Twisted Melon USB IDs
[media] staging/media/solo6x10: use module_pci_driver macro
[media] staging/media/dt3155v4l: use module_pci_driver macro
...
Conflicts:
Documentation/feature-removal-schedule.txt
Add Asus All-In-One PC keyboard model AK1D.
BugLink: https://bugs.launchpad.net/bugs/1027789
Signed-off-by: Cyrus Lien <cyrus.lien@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add yet another device to the list of Cypress barcode scanners
needing the CP_RDESC_SWAPPED_MIN_MAX quirk.
Signed-off-by: Lionel Vaux (iouri) <lionel.vaux@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid-picolcd and hid-wiimote do not allow any of hidinput, hiddev or hidraw
to claim the device but still want to remain on the bus. Hence, if a
driver uses the raw_event callback but no other listener claimed the
device, we still leave it on the bus as the driver handles everything by
itself. It thus becomes its own listener.
Under some circumstances (eg., hidinput_connect() fails and raw_event set)
a device may be left on the bus even though it requires external
listeners. But then if hidinput_connect() fails there are bigger issues
than a device that is left unhandled. So we can safely use this heuristic
to avoid adding another flag for special devices like hid-picolcd and
hid-wiimote.
This also removes the ugly hack from hid-picolcd as this is no longer
required.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1597) fixes some of the error paths in usbhid's suspend
routine. The driver was not careful to restart everything that might
have been stopped, in cases where a suspend failed.
For example, once the HID_SUSPENDED flag is set, an output report
submission would not restart the corresponding URB queue. If a
suspend fails, it's therefore necessary to check whether the queues
need to be restarted.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1596) improves the queue-restart logic in usbhid by
checking to see if the device is suspended or a reset is about to
occur. There's no point submitting an URB if either of those is
true.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1595) improves the usbhid driver by using the
HID_SUSPENDED bitflag to indicate that the device is suspended rather
than using HID_REPORTED_IDLE, which the patch removes.
Since HID_SUSPENDED was not being used for anything, and since the
name "HID_REPORTED_IDLE" doesn't convey much meaning, the end result
is easier to read and understand.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1594) simplifies the usbhid driver by inlining a couple
of routines. As a result of an earlier patch, irq_out_pump_restart()
and ctrl_pump_restart() are each used in only one place. Since they
don't really do what their names say, and since they each involve only
about two lines of actual code, there's no reason to keep them as
separate functions.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1593) fixes some logic errors in the usbhid driver
relating to runtime PM. The driver does not balance its calls to
usb_autopm_get_interface_async() and usb_autopm_put_interface_async().
For example, when the control queue is restarted the driver does a
_get. But the resume won't happen immediately, so the driver leaves
the queue stopped. When the resume does occur, the queue is restarted
and a second _get occurs, with no balancing _put.
The patch fixes the problem by rearranging the logic for restarting
the queues. All the _get/_put calls and bitflag settings in
__usbhid_submit_report() are moved into the queue-restart routines. A
balancing _put call is added for the case where the queue is still
suspended. A call to irq_out_pump_restart(), which doesn't take all
the right actions for restarting the irq-OUT queue, is replaced by a
call to usbhid_restart_out_queue(), which does. Similarly for
ctrl_pump_restart().
Finally, new code is added to prevent an autosuspend from happening
every time an URB is cancelled, and the comments explaining what
happens when an URB needs to be cancelled are expanded and clarified.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1592) fixes an obscure problem in the usbhid driver.
Under some circumstances, a control or interrupt-OUT URB can be
submitted twice. This will happen if the first submission fails; the
queue pointers aren't updated, so the next time the queue is restarted
the same URB will be submitted again.
The problem is that raw_report gets deallocated during the first
submission. The second submission will then dereference and try to
free an already-freed region of memory. The patch fixes the problem
by setting raw_report to NULL when it is deallocated and checking for
NULL before dereferencing it.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When using hidraw, hid buffer can be big and take lot's of
time to process (interrupt) kernel context.
Don't try to parse report if we are only interrested in hidraw.
Also don't prepare data for debug stuff if no debugfs file
are opened.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If we don't read fast enough hidraw device, hidraw_report_event
will cycle and we will leak list->buffer.
Also list->buffer are not free on release.
After this patch, kmemleak report nothing.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This was detected because events with invalid types were arriving
to userspace.
The code before this patch would only work for the first event in the
queue (when uhid->tail is 0).
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Reviewed-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The sensor attr can be used to tweak the optical sensor of the Savu.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID update from Jiri Kosina:
"A final round of changes for HID for 3.5: just device ID additions."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-multitouch: add support for Zytronic panels
HID: add Sennheiser BTD500USB device support
HID: add battery quirk for Apple Wireless ANSI
Pull input layer fixes from Dmitry Torokhov:
"The changes are limited to adding new VID/PID combinations to drivers
to enable support for new versions of hardware, most notably hardware
found in new MacBook Pro Retina boxes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add Andamiro Pump It Up pad
Input: xpad - add signature for Razer Onza Tournament Edition
Input: xpad - handle all variations of Mad Catz Beat Pad
Input: bcm5974 - Add support for 2012 MacBook Pro Retina
HID: add support for 2012 MacBook Pro Retina
Corrects two HID descriptor issues, which prevent some Holtek based
(USB ID 04d9:a055) keyboards from working. The error when not using
the driver is: generic-usb: probe ... failed with error -22 .
Signed-off-by: Tom Harwood <tomharwood@fastmail.fm>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device should be handled by xpad driver instead of generic HID driver.
Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the 15'' MacBook Pro Retina. The keyboard is
the same as recent models.
The patch needs to be synchronized with the bcm5974 patch for
the trackpad - as usual.
Patch originally written by clipcarl (forums.opensuse.org).
[rydberg@euromail.se: Amended mouse ignore lines]
Signed-off-by: Ryan Bourgeois <bluedragonx@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The keys are found on the keyboards bundled with HP All-In-One machines
with USB VID/PID of 04ca:004d and 04f2:1061.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Sennheiser BTD500USB composit device requires the
HID_QUIRK_NOGET flag to be set for working proper. Without the
flag the device crashes during hid intialization.
Signed-off-by: Frank Kunz <xxxxxmichl@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver for Apple Magic Trackpad/Mouse currently uses
Multi-touch Protocol A (MT-A) to report touch events and uses
ABS_MT_TRACKING_ID to do finger tracking. The fact of the device
being able to track individual finger makes it possible to
report touch events using MT-B. This patch converts the driver
to use MT-B as it is preferred to MT-A.
V4: Removed BTN_TOUCH evnet.
V3: Removed the single touch related logic.
V2: Converting entirely to MT-B as Henrik Rydberg suggested.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove the report_touches switch as it is not so useful to turn
off reporting touch events for a touch device. Let the userspace
to do the filtering if the turning off is needed.
V2: Remove report_touches as suggeted by Chase Douglas
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Reviewed-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, to the quirk list since it report
wrong feature type and wrong percentage range.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Did this to illustrate my understanding of the firmware generations:
Valo and Kone were 1st generation
Arvo was externaly developed and lies in the middle
All others until now are considered 2nd generation
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reduced code duplication by moving functions from individual drivers
to roccat-common module.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds rupport for Roccat Savu gaming mouse.
In comparison to the other Roccat modules I tried to move even more
functionality to userland.
Userland tools can soon be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Zytronic panels shows a new way of setting the Input Mode feature.
This feature is put in the second usage in the HID feature, instead
of the first, as the majority of the multitouch devices.
This patch adds a detection step when the feature is presented to know
where the feature is located in the report. We can then trigger the right
command to the device. This removes the magic number "0" in the function
mt_set_input_mode.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
"The most important one is a purification of Kconfig for CONFIG_HID;
the inclusion of HID groups and autoloading didn't leave the Kconfig
in a really consistent state. Henrik's patch fixes that. In addition
to that, there are two small fixes for logitech and magicmouse
drivers."
* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: Fix the generic Kconfig options
HID: magicmouse: Correct report range of major / minor axes
HID: logitech: don't use stack based dj_report structures
Pull media fixes from Mauro Carvalho Chehab.
Trivial conflict due to new USB HID ID's being added next to each other
(Baanto vs Axentia).
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits)
[media] smia: Fix compile failures
[media] Fix VIDIOC_DQEVENT docbook entry
[media] s5p-fimc: Fix control creation function
[media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
[media] s5p-mfc: Fix setting controls
[media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
[media] v4l/s5p-mfc: corrected encoder v4l control definitions
[media] v4l: mem2mem_testdev: Fix race conditions in driver
[media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
[media] cxd2820r: Fix an incorrect modulation type bitmask
[media] em28xx: Show a warning if the board does not support remote controls
[media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
[media] USB: Staging: media: lirc: initialize spinlocks before usage
[media] Revert "[media] media: mx2_camera: Fix mbus format handling"
[media] bw-qcam: driver and pixfmt documentation fixes
[media] cx88: fix firmware load on big-endian systems
[media] cx18: support big-endian systems
[media] ivtv: fix support for big-endian systems
[media] tuner-core: return the frequency range of the correct tuner
[media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
...
The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In patch "HID: magicmouse: Adjust major / minor axes to scale",
touch_major and touch_minor axes are scaled by a factor of
four when reported but the max touch_major/minor is not scaled
accordingly. This patch scales the max touch_major/minor to
be consistent with the reported value.
Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
gcc is giving me:
drivers/hid/uhid.c: In function ‘uhid_hid_get_raw’:
drivers/hid/uhid.c:157: warning: ‘len’ may be used uninitialized in this function
which is clearly bogus, as
- when used as memcpy() argument, it's initialized properly
- the code is structured in a way that either 'ret' or 'len'
is always initialized, so the return statement always has
an initialized value.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID standard allows sending a feature request to the device which is
answered by an HID report. uhid implements this by sending a UHID_FEATURE
event to user-space which then must answer with UHID_FEATURE_ANSWER. If it
doesn't do this in a timely manner, the request is discarded silently.
We serialize the feature requests, that is, there is always only a single
active feature-request sent to user-space, other requests have to wait.
HIDP and USB-HID do it the same way.
Because we discard feature-requests silently, we must make sure to match
a response to the corresponding request. We use sequence-IDs for this so
user-space must copy the ID from the request into the answer.
Feature-answers are ignored if they do not contain the same ID as the
currently pending feature request.
Internally, we must make sure that feature-requests are synchronized with
UHID_DESTROY and close() events. We must not dead-lock when closing the
HID device, either, so we have to use separate locks.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some drivers that use non-standard HID features require raw output reports
sent to the device. We now forward these requests directly to user-space
so the transport-level driver can correctly send it to the device or
handle it correspondingly.
There is no way to signal back whether the transmission was successful,
moreover, there might be lots of messages coming out from the driver
flushing the output-queue. However, there is currently no driver that
causes this so we are safe. If some drivers need to transmit lots of data
this way, we need a method to synchronize this and can implement another
UHID_OUTPUT_SYNC event.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If the hid-driver wants to send standardized data to the device it uses a
linux input_event. We forward this to the user-space transport-level
driver so they can perform the requested action on the device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID core notifies us with *_open/*_close callbacks when there is an actual
user of our device. We forward these to user-space so they can react on
this. This allows user-space to skip I/O unless they receive an OPEN
event. When they receive a CLOSE event they can stop I/O again to save
energy.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We send UHID_START and UHID_STOP events to user-space when the HID core
starts/stops the device. This notifies user-space about driver readiness
and data-I/O can start now.
This directly forwards the callbacks from hid-core to user-space.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the uhid_hid_parse callback is called we simply forward it to
hid_parse_report() with the data that we got in the UHID_CREATE event.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds a new event type UHID_INPUT which allows user-space to feed raw
HID reports into the HID subsystem. We copy the data into kernel memory
and directly feed it into the HID core.
There is no error handling of the events couldn't be parsed so user-space
should consider all events successfull unless read() returns an error.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
UHID_CREATE and UHID_DESTROY are used to create and destroy a device on an
open uhid char-device. Internally, we allocate and register an HID device
with the HID core and immediately start the device. From now on events may
be received or sent to the device.
The UHID_CREATE event has a payload similar to the data used by
Bluetooth-HIDP when creating a new connection.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to read() you can only write() a single event with one call to an
uhid device. To write multiple events use writev() which is supported by
uhid.
We currently always return -EOPNOTSUPP but other events will be added in
later patches.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
User-space can use read() to get a single event from uhid devices. read()
does never return multiple events. This allows us to extend the event
structure and still keep backwards compatibility.
If user-space wants to get multiple events in one syscall, they should use
the readv()/writev() syscalls which are supported by uhid.
This introduces a new lock which helps us synchronizing simultaneous reads
from user-space. We also correctly return -EINVAL/-EFAULT only on errors
and retry the read() when some other thread captured the event faster than
we did.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As long as the internal buffer is not empty, we return POLLIN to
user-space.
uhid->head and uhid->tail are no atomics so the comparison may return
inexact results. However, this doesn't matter here as user-space would
need to poll() in two threads simultaneously to trigger this. And in this
case it doesn't matter if a cached result is returned or the exact new
result as user-space does not know which thread returns first from poll()
and the following read(). So it is safe to compare the values without
locking.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When receiving messages from the HID subsystem, we need to process them
and store them in an internal buffer so user-space can read() on the char
device to retrieve the messages.
This adds a static buffer for 32 messages to each uhid device. Each
message is dynamically allocated so the uhid_device structure does not get
too big.
uhid_queue() adds a message to the buffer. If the buffer is full, the
message is discarded. uhid_queue_event() is an helper for messages without
payload.
This also adds a public header: uhid.h. It contains the declarations for
the user-space API. It is built around "struct uhid_event" which contains
a type field which specifies the event type and each event can then add a
variable-length payload. For now, there is only a dummy event but later
patches will add new event types and payloads.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds a dummy driver that will support user-space I/O drivers for the
HID subsystem. This allows to write transport-level drivers like USB-HID
and Bluetooth-HID in user-space.
Low-Energy Bluetooth needs this to feed HID data that is parsed in
user-space back into the kernel.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports
setting various device attributes, controlling mute and microphone mute
LEDs and enables use of the microphone mute key.
Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since Henrik's autoloading changes, the proper macro for device
entry is MT_USB_DEVICE().
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for a Novatek touchscreen panel as a generic HID multitouch
panel.
Signed-off-by: Austin Hendrix <ahendrix@willowgarage.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On a system with a logitech wireless keyboard/mouse and DMA-API debugging
enabled, this warning appears at boot:
kernel: WARNING: at lib/dma-debug.c:929 check_for_stack.part.12+0x70/0xa7()
kernel: Hardware name: MS-7593
kernel: uhci_hcd 0000:00:1d.1: DMA-API: device driver maps memory fromstack [addr=ffff8801b0079c29]
Make logi_dj_recv_query_paired_devices and logi_dj_recv_switch_to_dj_mode
use a structure allocated with kzalloc rather than a stack based one.
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull trivial updates from Jiri Kosina:
"As usual, it's mostly typo fixes, redundant code elimination and some
documentation updates."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
edac, mips: don't change code that has been removed in edac/mips tree
xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
lib: Change mail address of Oskar Schirmer
net: Change mail address of Oskar Schirmer
arm/m68k: Change mail address of Sebastian Hess
i2c: Change mail address of Oskar Schirmer
net: Fix tcp_build_and_update_options comment in struct tcp_sock
atomic64_32.h: fix parameter naming mismatch
Kconfig: replace "--- help ---" with "---help---"
c2port: fix bogus Kconfig "default no"
edac: Fix spelling errors.
qla1280: Remove redundant NULL check before release_firmware() call
remoteproc: remove redundant NULL check before release_firmware()
qla2xxx: Remove redundant NULL check before release_firmware() call.
aic94xx: Get rid of redundant NULL check before release_firmware() call
tehuti: delete redundant NULL check before release_firmware()
qlogic: get rid of a redundant test for NULL before call to release_firmware()
bna: remove redundant NULL test before release_firmware()
tg3: remove redundant NULL test before release_firmware() call
typhoon: get rid of redundant conditional before all to release_firmware()
...
Pull HID subsystem updates from Jiri Kosina:
"Apart from various driver updates and added support for a number of
new devices (mostly multitouch ones, but not limited to), there is one
change that is worth pointing out explicitly: creation of HID device
groups and proper autoloading of hid-multitouch, implemented by Henrik
Rydberg."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits)
HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
HID: waltop: Extend barrel button fix
HID: hyperv: Set the hid drvdata correctly
HID: wacom: Unify speed setting
HID: wacom: Add speed setting for Intuos4 WL
HID: wacom: Move Graphire raport header check.
HID: uclogic: Add support for UC-Logic TWHL850
HID: explain the signed/unsigned handling in hid_add_field()
HID: handle logical min/max signedness properly in parser
HID: logitech: read all 32 bits of report type bitfield
HID: wacom: Add LED selector control for Wacom Intuos4 WL
HID: hid-multitouch: fix wrong protocol detection
HID: wiimote: Fix IR data parser
HID: wacom: Add tilt reporting for Intuos4 WL
HID: multitouch: MT interface matching for Baanto
HID: hid-multitouch: Only match MT interfaces
HID: Create a common generic driver
HID: hid-multitouch: Switch to device groups
HID: Create a generic device group
HID: Allow bus wildcard matching
...
CONFIG_HID_WACOM must depend on CONFIG_LEDS_CLASS, otherwise
CONFIG_NEW_LEDS may be disabled.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend Waltop barrel button fix to all models: ignore reported pressure when a
barrel button is pressed, because it is rarely correct. Report zero pressure in
such cases instead.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set the hid drvdata prior to invoking hid_add_device() as hid_add_device()
expects this state to be set. This bug was introduced in the recent hid
changes that were made in 07d9ab4f0e ("HID: hid-hyperv: Do not use
hid_parse_report() directly").
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch unifies speed setting for both supported tablets. Functionality
of "wacom_poke" (used only by Graphire) is now in "wacom_set_features".
Reporting speed for both tablets can be changed by somethinkg like:
echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed
Accepted values:
0 - low speed,
1 - high speed.
The way of changing reporting speed is the same for Graphire and Intuos4 WL.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add option to change reporting speed for Intuos4 WL. The option is only
internal to the module, but it will be extended to allow control over sysfs,
as it is already implemented for Graphire.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
That check is valid only for Wacom Graphire, as the device raports always
start with 0x03. Intuos4 WL high-speed raports begin with 0x04, so
the check would be filtering out valid reports.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for UC-Logic Wireless Tablet TWHL850.
It is known to be sold as Genius MousePen M508W.
This tablet has a bug in the default (compatibility) mode which is used in this
driver: frame button assignments are mixed up. This is to be fixed with a driver
supporting the vendor-specific protocol.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Put a comment that clarifies the condition that handles both signed
and unsigned case for logical min/max in hid_add_field().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When logical maximum is 0xffffffff, the parser fails even if
logical minimum is more than 0.
By HID specification this is a valid combination.
Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On big-endian systems (e.g., Apple PowerBook), trying to use a
logitech wireless mouse with the Logitech Unifying Receiver does not
work with v3.2 and later kernels. The device doesn't show up in
/dev/input. Older kernels work fine.
That is because the new hid-logitech-dj driver claims the device. The
device arrival notification appears:
20 00 41 02 00 00 00 00 00 00 00 00 00 00 00
and we read the report_types bitfield (02 00 00 00) to find out what
kind of device it is. Unfortunately the driver only reads the first 8
bits and treats that value as a 32-bit little-endian number, so on a
powerpc the report type seems to be 0x02000000 and is not recognized.
Even on little-endian machines, connecting a media center remote
control (report type 00 01 00 00) with this driver loaded would
presumably fail for the same reason.
Fix both problems by using get_unaligned_le32() to read all four
bytes, which is a little clearer anyway. After this change, the
wireless mouse works on Hugo's PowerBook again.
Based on a patch by Nestor Lopez Casado.
Addresses http://bugs.debian.org/671292
Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar>
Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4
different LEDs on the tablet and they can be turned on by something like:
echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness
Only one can be lit at a time. The brightness range is 0 to 127. This patch
also contains short ABI description.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous implementation introduced a randomness in the splitting
of the different touches reported by the device. This version is more
robust as we don't rely on hi->input->absbit, but on our own structure.
This also prepares hid-multitouch to better support Win8 devices.
[Jiri Kosina <jkosina@suse.cz>: fix build]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We incorrectly parse incoming IR data. The extra byte contains the upper
bits and not the lower bits of the x/y coordinates. User-space expects
absolute position data from us so this patch does not break existing
applications. On the contrary, it extends the virtual view and fixes
garbage reports for margin areas of the virtual screen.
Cc: stable@kernel.org
Reported-by: Peter Bukovsky <bukovsky.peter@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tile is reported to input subsystem as reported by the device without
any modifications. It means that tilt X/Y range is 0 to 127 and it's
not centered on zero.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Baanto device entry needs to be altered in the same way other device
entries have been changed in 2c2110e90b ("HID: hid-multitouch: Only match
MT interfaces").
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I am merging multitouch branch into device-groups so that support
for Baanto device can be adjusted accordingly to the new autoloading
patches.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
All known hid-multitouch devices currently match any device group.
However, some devices present interfaces belonging to different groups,
resulting in a race between the hid-generic and hid-multitouch modules.
This patch narrows the MT device list to match only HID_GROUP_MULTITOUCH,
which solves the problem.
As an exception, the USB_DEVICE_ID_CYPRESS_TRUETOUCH panel is not
modified, in order to suppress the unwanted extra interfaces of the
device.
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
dbg() was a very old USB-specific macro that should no longer
be used. This patch removes it from being used in the driver
and uses dev_dbg() instead.
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some HCDs usb_unlink_urb() can directly call the
completion handler. That limits the spinlocks that can
be taken in the handler to locks not held while calling
usb_unlink_urb()
To prevent a race with resubmission, this patch exposes
usbcore's infrastructure for blocking submission, uses it
and so drops the lock without causing a race in usbhid.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the hid drivers of the bus drivers to a common generic hid
driver, and make it a proper module. This ought to simplify device
handling moving forward.
Cc: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Switch the driver over to device group handling. By adding the
HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer
match multitouch devices. By adding the HID_GROUP_MULTITOUCH entry to
the device list, hid-multitouch will match all unknown multitouch
devices, and udev will automatically load the module.
Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling
can be removed. Since all HID MT devices have HID_DG_CONTACTID, they
can be removed from the hid_have_special_driver list.
With this patch, the unknown device ids are no longer NULL, so the code
is modified to check for the generic entry instead.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Devices that do not have a special driver are handled by the generic
driver. This patch does the same thing using device groups; Instead of
forcing a particular driver, the appropriate driver is picked up by
udev. As a consequence, one can now move a device from generic to
specific handling by a simple rebind. By adding a new device id to the
generic driver, the same thing can be done in reverse.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Most HID drivers do not need to know what bus driver is in use.
A generic group driver can drive any hid device, and the device
list should not need to be duplicated for each new bus.
This patch adds wildcard matching to the HID bus, simplifying device
list handling for group drivers.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In order to allow the report descriptor to influence the hid device
properties, one needs to parse the descriptor early, without reference
to any driver. Scan the descriptor for group information during device
add, before the device has been broadcast to userland. The device
modalias will contain group information which can be used to
differentiate between modules. For starters, just handle the generic
group.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID devices are only partially presented to userland. Hotplugged
devices emit events containing a modalias based on the basic bus,
vendor and product entities. However, in practise a hid device can
depend on details such as a single usb interface or a particular item
in a report descriptor.
This patch adds a device group to the hid device id, and broadcasts it
using uevent and the device modalias. The module alias generation is
modified to match. As a consequence, a device with a non-zero group
will be processed by the corresponding group driver instead of by the
generic hid driver.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The low-level driver can read the report descriptor, but it cannot
determine driver-specific changes to it. The hid core can fixup
and parse the report descriptor during driver attach, but does
not have direct access to the descriptor when doing so.
To be able to handle attach/detach of hid drivers properly,
a semantic change to hid_parse_report() is needed. This function has
been used in two ways, both as descriptor reader in the ll drivers and
as a parsor in the probe of the drivers. This patch splits the usage
by introducing hid_open_report(), and modifies the hid_parse() macro
to call hid_open_report() instead. The only usage of hid_parse_report()
is then to read and store the device descriptor. As a consequence, we
can handle the report fixups automatically inside the hid core.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The current code allows several consecutive calls to hid_parse_report(),
which may have happened to work before, but would cause a memory leak
and generally be incorrect. This patch collects all the reports
before sending them once.
Cc: Nestor Lopez Casado <nlopezcasad@logitech.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Upcoming changes will split the semantics of hid_parse_report()
and hid_parse(), so make sure drivers use hid_parse() in probe().
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If kmemdup() in hidraw_report_event() fails, we are not propagating
this fact properly.
Let hidraw_report_event() and hid_report_raw_event() return an error
value to the caller.
Reported-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Everytime a HID device is opened, a new hiddev_list is allocated with
kzalloc. This requires 64KB of physically contiguous memory, which could
easily push a heavily loaded system over the edge.
Allocating the same amount of memory with vmalloc shouldn't be nearly as
demanding, so let's do that instead. The memory isn't used for DMA and
doesn't look particularly performance sensitive, so this should be safe.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
err() was a very old USB-specific macro that I thought had
gone away. This patch removes it from being used in the
driver and uses dev_err() instead.
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HID_BATTERY_STRENGTH is missing both help text and description text.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Updated comments to say that this driver now supports all Logitech
gaming wheels, and not just the WiiWheel.
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds supports for controlling the LED 'tachometer' on
the G27 wheel, via the LED subsystem.
The 5 LEDs are arranged from right (1=grn, 2=grn, 3=yel, 4=yel, 5=red)
and 'mirrored' to the left (10 LEDs in total).
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
"Fix for one particular device (bluetooth Tivo Slide) and change of
'default y' -> 'default n' for CONFIG_HID_BATTERY_STRENGTH which I
overlooked in the initial merge of the battery support"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: default HID_BATTERY_STRENGTH to no
HID: tivo: fix support for bluetooth version of tivo Slide
Commit 4f5ca836b "HID: hid-input: add support for HID devices reporting
Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report
the battery strength of HID devices. The commit log explicitly mentions
it not working properly with recent userspace, but it is default y
anyway. This is rather odd, and actually causes problems on real
systems.
This works around Fedora bug
https://bugzilla.redhat.com/show_bug.cgi?id=806295
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Devices like Aureal Cy se W-01RN USB_V3.1 and some derived hardware
have a bogus HID Report Descriptor. According to that report descriptor,
the maximum logical value for key events is 1 and not 101 (101 keys).
This quirk fixes this wrong Report Descriptor.
Signed-off-by: Josenivaldo Benito Junior <jrbenito@benito.qsl.br>
Signed-off-by: Franco Catrin <fcatrin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
lg4ff now calls hid_get/set_drvdata() to read or store device configuration.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Tested-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a USB device reset occurs, usbcore will refetch the device and configuration
descriptors and compare them with those retrieved before the reset to ensure
that they have not changed. For USB HID devices, this implicitly includes the
HID class descriptor (as this is fetched with the configuration descriptor).
However, the HID report descriptor is not checked again.
Whilst a change in the size of the HID report descriptor will be detected (as
this is held in the class descriptor), content changes to the report descriptor
which do not result in a change in its size will be missed. If a firmware update
were applied to a USB HID device which resulted in such a change to the report
descriptor after device reset, then this would not be picked up by usbhid.
This patch fixes this issue by allowing usbhid to check the contents of the
report descriptor after the device reset, and trigger a rebind of the device
if there is a mismatch.
Reviewed-by: Toby Gray <toby.gray@realvnc.com>
Signed-off-by: Simon Haggett <simon.haggett@realvnc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes a possible race condition caused by the sysfs
interface being removed after the memory used by the interface
was already kfree'd.
Signed-off-by: Michal Malý <madcatsxter@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for custom device-specific properties which can now be
stored as private driver data and read/saved using hid_get/set_drvdata().
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Tested-by: simon@mungewell.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device is a bluetooth device, but one occurence by mistake
had marked it as USB.
Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device is a bluetooth device, but one occurence by mistake
had marked it as USB.
Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case IO cannot be started because there is a lack of bandwidth
on the bus, it makes no sense to reset the device. If IO is requested
because the device is opened, user space should be notified with
an error right away. If the lack of bandwidth arises later, for
example after resume, there's no other choice but to retry in the
hope that bandwidth will be freed.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes a silly mistake: HID_WACOM was dependent on HID_WACOM, so
the option wasn't showing up after make menuconfig
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for Waltop Sirius Battery Free Tablet. VisTablet Muse and Princeton
PTB-S1BK are other possible names of this tablet.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add digitizer X Tilt and Y Tilt usage support along with resolution calculation.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds battery/ac reporting for Intuos4 WL. It uses existing
sysfs code, but the device reports battery capacity in more fine-grained way,
so there has to be a separate lookup table (called batcap_i4).
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch doesn't change the way battery/ac is reported, but the changes are
required to facilitate battery reporting for Intuos4 WL.
wdata->battery_capacity now stores actual battery capacity as opposed to raw
value reported by wacom graphire previously. Power supply state is now stored
in a separate variable - it used to be calculated on-the-fly in
wacom_ac_get_property function. The raw value has to be stored as well to be
able to determine if it has changed.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This option was ment as a safety mechanism in case the system treats the wacom
tablet battery as the main power supply. It's no longer required as now we can
distinguish between system power supply and device power supply.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull media updates from Mauro Carvalho Chehab:
- V4L2 API additions to better support JPEG compression control
- media API additions to properly support MPEG decoders
- V4L2 API additions for image crop/scaling
- a few other V4L2 API DocBook fixes/improvements
- two new DVB frontend drivers: m88rs2000 and rtl2830
- two new DVB drivers: az6007 and rtl28xxu
- a framework for ISA drivers, that removed lots of common code found
at the ISA radio drivers
- a new FM transmitter driver (radio-keene)
- a GPIO-based IR receiver driver
- a new sensor driver: mt9m032
- some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
vs6624
- several new board additions, driver fixes, improvements and cleanups.
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
[media] update CARDLIST.em28xx
[media] partially reverts changeset fa5527c
[media] stb0899: fix the limits for signal strength values
[media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
[media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
[media] -EINVAL -> -ENOTTY
[media] gspca - sn9c20x: Cleanup source
[media] gspca - sn9c20x: Simplify register write for capture start/stop
[media] gspca - sn9c20x: Add automatic JPEG compression mechanism
[media] gspca - sn9c20x: Greater delay in case of sensor no response
[media] gspca - sn9c20x: Optimize the code of write sequences
[media] gspca - sn9c20x: Add the JPEG compression quality control
[media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
[media] gspca - sn9c20x: Propagate USB errors to higher level
[media] gspca - sn9c20x: Use the new video control mechanism
[media] gspca - sn9c20x: Fix loss of frame start
[media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
[media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
[media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
[media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
...
Pull input subsystem updates from Dmitry Torokhov:
"- we finally merged driver for USB version of Synaptics touchpads
(I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);
- a bunch of new drivers for embedded platforms (Cypress
touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
touchscreens, TI touchscreen);
- input core allows clients to specify desired clock source for
timestamps on input events (EVIOCSCLOCKID ioctl);
- input core allows querying state of all MT slots for given event
code via EVIOCGMTSLOTS ioctl;
- various driver fixes and improvements."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: ili210x - add support for Ilitek ILI210x based touchscreens
Input: altera_ps2 - use of_match_ptr()
Input: synaptics_usb - switch to module_usb_driver()
Input: convert I2C drivers to use module_i2c_driver()
Input: convert SPI drivers to use module_spi_driver()
Input: omap4-keypad - move platform_data to <linux/platform_data>
Input: kxtj9 - who_am_i check value and initial data rate fixes
Input: add driver support for MAX8997-haptic
Input: tegra-kbc - revise device tree support
Input: of_keymap - add device tree bindings for simple key matrices
Input: wacom - fix physical size calculation for 3rd-gen Bamboo
Input: twl4030-vibra - really switch from #if to #ifdef
Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
Input: max8925_onkey - avoid accessing input device too early
Input: max8925_onkey - allow to be used as a wakeup source
Input: atmel-wm97xx - convert to dev_pm_ops
Input: atmel-wm97xx - set driver owner
Input: add cyttsp touchscreen maintainer entry
Input: cyttsp - remove useless checks in cyttsp_probe()
Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
...
Pull HID updates from Jiri Kosina:
"It contains HID driver updates all over the place -- a lot of new
hardware support especially in the multitouch area, including generic
handling of all multitouch devices by the hid-multitiouch driver
automatically."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (42 commits)
HID: multitouch: add PID for Fructel product
HID: wacom: Add reporting of wheel for Intuos4 WL
HID: wacom: Replace __set_bit with input_set_capability
HID: tivo: add support for BT-version (0x1200)
HID: wacom: Reset stylus buttons - Intuos4 WL
HID: multitouch: detect serial protocol
HID: handle all multitouch devices through hid-multitouch
HID: multitouch: fix handling of buggy reports descriptors for Dell ST2220T
HID: make it possible to force hid-core claim the device
HID: multitouch: add support for eGalax 0x722a
HID: usbhid: add quirk no_get for quanta 3008 devices
HID: multitouch: add more eGalax devices
HID: multitouch: add new PID from Ideacom
HID: multitouch: add support for Atmel maXTouch 03eb:2118
HID: waltop: Add support for tablet with PID 0038
HID: waltop: Replace original rdescs with links
HID: uclogic: Replace original rdescs with links
HID: wacom: Add pad buttons reporting on Intuos4 WL
HID: wacom: report distance for Intuos4 WL
HID: kye: Add support for 3 tablets
...
Here's the big driver core merge for 3.4-rc1.
Lots of various things here, sysfs fixes/tweaks (with the nlink breakage
reverted), dynamic debugging updates, w1 drivers, hyperv driver updates,
and a variety of other bits and pieces, full information in the
shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk9neCsACgkQMUfUDdst+ylyQwCfY2eizvzw5HhjQs8gOiBRDADe
yrgAnj1Zan2QkoCnQIFJNAoxqNX9yAhd
=biH6
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches for 3.4-rc1 from Greg KH:
"Here's the big driver core merge for 3.4-rc1.
Lots of various things here, sysfs fixes/tweaks (with the nlink
breakage reverted), dynamic debugging updates, w1 drivers, hyperv
driver updates, and a variety of other bits and pieces, full
information in the shortlog."
* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
Tools: hv: Support enumeration from all the pools
Tools: hv: Fully support the new KVP verbs in the user level daemon
Drivers: hv: Support the newly introduced KVP messages in the driver
Drivers: hv: Add new message types to enhance KVP
regulator: Support driver probe deferral
Revert "sysfs: Kill nlink counting."
uevent: send events in correct order according to seqnum (v3)
driver core: minor comment formatting cleanups
driver core: move the deferred probe pointer into the private area
drivercore: Add driver probe deferral mechanism
DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
w1_bq27000: Only one thread can access the bq27000 at a time.
w1_bq27000 - remove w1_bq27000_write
w1_bq27000: remove unnecessary NULL test.
sysfs: Fix memory leak in sysfs_sd_setsecdata().
intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
w1: Fix w1_bq27000
driver-core: documentation: fix up Greg's email address
powernow-k6: Really enable auto-loading
powernow-k7: Fix CPU family number
...
Adds multitouch support for the Gametel Android game controller.
The multitouch events are emulated by the Gametel device. Each physical button
is configured to generate a MT event on a specific coordinate. This seems to be
the only way for us to support Android games that doesn't support HID gamepads.
It is possible to inject MT events at Android level, but this requires root on
the phone.
Signed-off-by: Andreas Nielsen <eas@svep.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* tag 'v3.3': (1646 commits)
Linux 3.3
Don't limit non-nested epoll paths
netfilter: ctnetlink: fix race between delete and timeout expiration
ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
nilfs2: clamp ns_r_segments_percentage to [1, 99]
afs: Remote abort can cause BUG in rxrpc code
afs: Read of file returns EBADMSG
C6X: remove dead code from entry.S
wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
net/hyperv: fix erroneous NETDEV_TX_BUSY use
net/usbnet: reserve headroom on rx skbs
bnx2x: fix memory leak in bnx2x_init_firmware()
bnx2x: fix a crash on corrupt firmware file
sch_sfq: revert dont put new flow at the end of flows
ipv6: fix icmp6_dst_alloc()
MAINTAINERS: Add Serge as maintainer of capabilities
drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
MAINTAINERS: add entry for exynos mipi display drivers
MAINTAINERS: fix link to Gustavo Padovans tree
...
This patch adds reporting of ABS_WHEEL event. Raported walues are 0..71
and are related to absolute location of the finger on the wheel.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It's a trivial patch. It's doesn't change the functionality as the helper
input_set_capability does the same thing.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for BT-driven configuration of the TiVo remote.
Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stylus buttons have to be resetted when going out-of-prox.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft's documentation about multitouch protocols tells that
if a device presents one touch per report, then it should be treated
as a serial protocol.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the quirk HID_QUIRK_MULTITOUCH is present and when hid-multitouch
is loaded, let's pass the device to hid-multitouch even if it has
not been registered in hid-multitouch.
If any other driver wants to take precedence over hid-multitouch,
the usual way of adding it to hid_have_special_driver will work as
the quirk HID_QUIRK_MULTITOUCH won't be set by the generic hid layer.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
LG multitouch panels, such as the one found in Dell ST2220T, has buggy
reports descriptors. With the previous implementation, it was impossible
to rely on the reports descriptors to determine how the different
touches are emitted from the device.
This patch changes the splitting of the different touches in the report
in a more robust way.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce 'hid_ignore_special_drivers' module parameter that makes hid-core
claim the device even if it's listed in hid_have_special_driver[]. This
is useful mostly for debugging purposes and specialized initrds, where
all the hid drivers are not avaiable.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some quanta devices do not like to be polled for reports
descriptors, thus this quirk.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is a list of devices that should be handled by hid-multitouch. They all
present the HID usage "Contact ID" and won't be handled by hid-input. Some of
them have _not_ been tested (though I have their report descriptors), but I've
been guaranted by eeti that they follow the same protocol. The tested ones are
also blacklisted in hid-core.c.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for unknown Waltop tablet with product ID 0x0038.
This tablet is sold as Genius G-Pen F509.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace original report descriptor dumps in the comments with links to tablet
descriptions in a wiki, to make code clearer.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allow array field values out of range as per HID 1.11 specification,
section 6.2.25:
Rather than returning a single bit for each button in the group, an
array returns an index in each field that corresponds to the pressed
button (like keyboard scan codes). An out-of range value in and array
field is considered no controls asserted.
Apparently, "and" above is a typo and should be "an".
This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never
released.
The relevant part of Waltop tablet report descriptors is this:
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
This is a regression fix for commit b4b583d ("HID: be more strict when
ignoring out-of-range fields").
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds reporting of 1 wheel button and 8 strip buttons for Intuos4 WL.
The buttons are reported as BTN_0 to BTN_9. The change of type butstate variable
is required as the old type 'char' couldn't store state of 9 buttons. The change
is not affecting Graphire tablet as it only uses first 2 bits of 'butstate'.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by：Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds reporting of distance of tool to the tablet surface. Maximum
reported value is 63 (0x3F).
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed
by AIREN. This keyboard seems to have a lot of bugs; NOGET works
around only one of them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: okias <d.okias@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch implements reporting id and serial number of used tool.
Reported values are the same as for USB on of the driver for wacom Intuos4 WL
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ABS_MISC has to be set for Intuos4 WL otherwise xorg driver won't use proper
protocol and the information about tool id and serial is lost.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.
Signed-off-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Before commit 534a7b8e1 ("HID: Add full support for Logitech Unifying
receivers") Logitech Unifying receiver can work as generic device
without special driver, after that commit these devices does not works
without special driver.
After this patch they will use generic driver if special driver is disabled.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Don't zero the current tool before reporting its release to the input
subsystem.
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Also correct the quirks for the Super Joy Box 3 Pro and Super Dual Box.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The name reported by Inutos4 WL connected by bluetooth is "PTK-540WL" and
to make it consistent with other Wacom devices it has to be converted to
"Wacom Intuos4 WL". It also makes userland applications aware that it's
a Wacom device.
This aligns naming of device to same used when this device is plugged into USB
port and controlled by USB wacom driver; and thus helps align userland logic to
route to apps like xf86-input-wacom.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This
patch adds device id for Fighterstick and adds necessary line to HID quirk
list.
Signed-off-by: Ville Ranki <ville.ranki@iki.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
While at it, also fix some minor codingstyle issues.
Signed-off-by: Denis Kovalev <Denis.Kovalev@dataart.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Keene FM transmitter USB device has the same USB ID as
the Logitech AudioHub Speaker, but it should ignore the hid.
Check if the name is that of the Keene device.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add support for Waltop Q Pad by fixing its report descriptor.
This tablet is also sold as Aiptek HyperPen Mini. Other possible names
include: NGS Flexi Style, VisTablet PenPad, iVistaTablet Q Flex Pad, Bravod
Q-PD65-S.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Analogically to d7cb3dbd1 ("HID: wacom: Fix invalid power_supply_powers
calls"), fix also the same occurence in wiimote driver.
Reported-by: przemo@firszt.eu
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.
What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).
lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
power_supply_powers calls added in 35b4c01e2 ("power_supply: add "powers" links
to self-powered HID devices") have to be called after power device is created.
This patch also fixes the second call - it has to be "ac" instead of "battery"
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sync with Linus' tree. This is necessary to have a base for
patch that fixes commit 35b4c01e29 ("power_supply: add "powers"
links to self-powered HID devices") which went in through Anton's
tree.
Perixx Peripad 701 is an hybrid device which presents a touchpad and
a keyboard on the same surface. The switch between the two is controlled
by a physical switch, and the firmware sends the events on the right
interface (mouse, keyboard or multitouch).
This patch enables the multitouch interface of this device to work.
We need to manually set the device as a trackpad (we cannot infer it
from the reports descriptors as the device works under Windows, a system
that does not allow multitouch touchpad).
We also need to set the hid feature MAX CONTACT NUMBER to 2 or the device
stops sending events once it has been pressed by two touches.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some devices, like Perixx Peripad 701 do not work if the feature
"Maximum Contact Number" is not set to the right value.
This patch allows hid-multitouch to control this feature.
If the programmer fills the field maxcontacts in the mt_class,
then the driver will set the feature to this value. It is safe
for current drivers as the feature is read/write in the HID norm
and all devices should implement the norm.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* some multitouch trackpads present the touch usage. This needs to be
filtered as it will conflict with mt-implementation.
* trackpads send BTN_TOOL_* to notify how many fingers are present
(this is used by xorg to use synaptics instead of generic evdev)
* trackpads like Perixx 701 are not different from a hid point of view
from a touchscreen, and we need to manually set them as touchpad.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To cleanup Kconfig space and ease selection for users there is now
a single entry that selects all roccat related drivers at once.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Set the battery's power supply scope to "Device" and point the power
supply to the powered device.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds a driver for Synaptics USB touchpad or pointing stick
devices. These USB devices emulate an USB mouse by default, so one can
also use the usbhid driver. However, in combination with special user
space drivers this kernel driver allows one to customize the behaviour
of the device.
An extended version of this driver with support for the cPad background
display can be found at
<http://jan-steinhoff.de/linux/synaptics-usb.html>.
Signed-off-by: Jan Steinhoff <mail@jan-steinhoff.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
The user can only experience the bug if she pairs 6 devices to a Unifying
receiver. The sixth paired device would not work.
The value changed is actually a bitmask that enables reporting from each
paired device. As the sixth bit was not set, the sixth device reports are
ignored by the receiver and never get to the driver.
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
drivers/hid/hid-logitech-dj.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the camera key. The hotkey for
Asus S.H.E(Super Hybrid Engine) mode is mapped to KEY_KEY_PROG1
just for notifying the userspace.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus All-In-One PC has a wireless keyboard with wifi toggle,
brightness up, brightness down and display off hotkeys.
This patch adds suppoort for these hotkeys.
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As part of the removal of get_driver()/put_driver(), this patch
(as1511) changes all the places that add dynamic IDs for drivers.
Since these additions are done by writing to the drivers' sysfs
attribute files, and the attributes are removed when the drivers are
unregistered, there is no reason to take an extra reference to the
drivers.
The one exception is the pci-stub driver, which calls pci_add_dynid()
as part of its registration. But again, there's no reason to take an
extra reference here, because the driver can't be unloaded while it is
being registered.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* git://git.infradead.org/battery-2.6: (68 commits)
power_supply: Mark da9052 driver as broken
power_supply: Drop usage of nowarn variant of sysfs_create_link()
s3c_adc_battery: Average over more than one adc sample
power_supply: Add DA9052 battery driver
isp1704_charger: Fix missing check
jz4740-battery: Fix signedness bug
power_supply: Assume mains power by default
sbs-battery: Fix devicetree match table
ARM: rx51: Add bq27200 i2c board info
sbs-battery: Change power supply name
devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings
devicetree-bindings: Add vendor entry for Smart Battery Systems
sbs-battery: Rename internals to new name
bq20z75: Rename to sbs-battery
wm97xx_battery: Use DEFINE_MUTEX() for work_lock
max8997_charger: Remove duplicate module.h
lp8727_charger: Some minor fixes for the header
lp8727_charger: Add header file
power_supply: Convert drivers/power/* to use module_platform_driver()
power_supply: Add "unknown" in power supply type
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits)
hid-input/battery: add FEATURE quirk
hid-input/battery: remove battery_val
hid-input/battery: power-supply type really *is* a battery
hid-input/battery: make the battery setup common for INPUTs and FEATUREs
hid-input/battery: deal with both FEATURE and INPUT report batteries
hid-input/battery: add quirks for battery
hid-input/battery: remove apparently redundant kmalloc
hid-input: add support for HID devices reporting Battery Strength
HID: hid-multitouch: add support 9 new Xiroku devices
HID: multitouch: add support for 3M 32"
HID: multitouch: add support of Atmel multitouch panels
HID: usbhid: defer LED setting to a workqueue
HID: usbhid: hid-core: submit queued urbs before suspend
HID: usbhid: remove LED_ON
HID: emsff: use symbolic name instead of hardcoded PID constant
HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II
HID: Kconfig: fix syntax
HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
HID: multitouch: support PixArt optical touch screen
HID: make parser more verbose about parsing errors by default
...
Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in
staging, moved in this branch) and similarly for the rules for same file
in drivers/staging/hv/{Kconfig,Makefile}.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...
Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
reiserfs: Properly display mount options in /proc/mounts
vfs: prevent remount read-only if pending removes
vfs: count unlinked inodes
vfs: protect remounting superblock read-only
vfs: keep list of mounts for each superblock
vfs: switch ->show_options() to struct dentry *
vfs: switch ->show_path() to struct dentry *
vfs: switch ->show_devname() to struct dentry *
vfs: switch ->show_stats to struct dentry *
switch security_path_chmod() to struct path *
vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
vfs: trim includes a bit
switch mnt_namespace ->root to struct mount
vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
vfs: opencode mntget() mnt_set_mountpoint()
vfs: spread struct mount - remaining argument of next_mnt()
vfs: move fsnotify junk to struct mount
vfs: move mnt_devname
vfs: move mnt_list to struct mount
vfs: switch pnode.h macros to struct mount *
...
Apple keyboards require a FEATURE report to query the battery state,
even though they list as an input. Without this, it returns an error.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
hidinput_get_battery_property() now directly polls the device for the
current battery strength, so there's no need for battery_val, or the
code to set it on the input event path.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
It just isn't a battery which is powering the computer. upower needs
a more nuanced understanding of this.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Some devices always report percentage, despite having 0/255 as their
min/max, so add a quirk for them.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
I've sent an email earlier asking for help with a GetFeature code, and now I
have a second patch on top of Jeremy's to provide the battery functionality
for devices that support reporting it.
If I understood correctly when talking to Jeremy he said his device
never actually reported the status as an input event (sorry if I didn't
understand it correctly), and after reading HID specs I believe it's
really because it was meant to be probed, I have an Apple Keyboard and
Magic Trackpad both bluetooth batteries operated, so using PacketLogger
I saw that Mac OSX always ask the battery status using the so called
GetFeature.
What my patch does is basically:
- store the report id that matches the battery_strength
- setup the battery if 0x6.0x20 is found, even if that is reported as a feature
(as it was meant to be but only the MagicTrackpad does)
- when upower or someone access /sys/class/power_supply/hid-*/capacity it
will probe the device and return it's status.
It works great for both devices, but I have two concerns:
- the report_features function has a duplicated code
- it would be nice if it was possible for specific drivers to provide their own
probe as there might be some strange devices... (but maybe it's
already possible)
I've talked to the upower dev and he fixed it to be able to show the
right percentage.
Here how the uevent file (in /sys/class/power_supply/hid-*/) looks like:
POWER_SUPPLY_NAME=hid-00:22:41:D9:18:E7-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=66
POWER_SUPPLY_MODEL_NAME=MacAdmin’s keyboard
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_NAME=hid-70:CD:60:F5:FF:3F-battery
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_CAPACITY=62
POWER_SUPPLY_MODEL_NAME=nexx’s Trackpad
POWER_SUPPLY_STATUS=Discharging
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.
The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.).
Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Defer LED setting action to a workqueue.
This is more likely to send all LED change events in a single URB.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If any userspace program has opened a keyboard device, the input core
de-activates the keyboard's LEDs upon suspend(). It does this by sending
individual EV_LED[LED_X]=0 events to the underlying device driver by
directly calling the driver's registered event() handler.
The usb-hid driver event() handler processes each request by immediately
attempting to submit a CTRL URB to turn off the LED. USB URB submission
is asynchronous. First the URB is added to the head of the ctrl queue.
Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately
(and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true,
then the newly queued URB is submitted in the ctrl completion handler when
all previously submitted URBs have completed. When all queued URBs have
been submitted, the completion handler clears the CTRL_RUNNING flag.
In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get
queued, with only the first actually submitted. Soon after input
suspend() handler finishes, the usb-hid suspend() handler gets called.
Since this is NOT a PM_EVENT_AUTO suspend, the handler sets
REPORTED_IDLE, then waits for io to complete.
Unfortunately, this usually happens while the first LED request is
actually still being processed. Thus when the completion handler tries
to submit the second LED request it fails, since REPORTED_IDLE is
already set! This REPORTED_IDLE check failure causes the completion
handler to complete, however without clearing the CTRL_RUNNING flag.
This, in turn, means that the suspend() handler's wait_io() condition
is never satisfied, and instead it times out after 10 seconds, aborting
the original system suspend.
This patch changes the behavior to the following:
(1) allow completion handler to finish submitting all queued URBs, even if
REPORTED_IDLE is set. This guarantees that all URBs queued before the
hid-core suspend() call will be submitted before the system is
suspended.
(2) if REPORTED_IDLE is set and the URB queue is empty, queue, but
don't submit, new URB submission requests. These queued requests get
submitted when resume() flushes the URB queue. This is similar to the
existing behavior, however, any requests that arrive while the queue is
not yet empty will still get submitted before suspend.
(3) set the RUNNING flag when flushing the URB queue in resume().
This keeps URBs that were queued in (2) from colliding with any new
URBs that are being submitted during the resume process. The new URB
submission requests upon resume get properly queued behind the ones
being flushed instead of the current situation where they collide,
causing memory corruption and oopses.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
LED_ON was defined in the original version of the hid-core autosuspend patch.
However, during review, the setting and clearing of it was redone
using ledcount. The test was left in accidentally.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add quirk for the Trio Linker Plus II - the adapter supports several
controllers simultaneously, generating a new HID entry for each connected
device.
Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ppc6xx_defconfig reveals this:
drivers/built-in.o: In function `hidinput_cleanup_battery': drivers/hid/hid-input.c:351: undefined reference to`power_supply_unregister'
drivers/built-in.o: In function `hidinput_setup_battery': drivers/hid/hid-input.c:338: undefined reference to `power_supply_register'
make[1]: *** [.tmp_vmlinux1] Error 1
The defconfig in question doens't mention either option and kbuild is
genertaing
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_POWER_SUPPLY=m
which is wrong. Put a proper dependency in place.
Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen. Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Most of the parsing errors (typically resulting in device not being claimed
by HID subsystem at all) are reported only in debugging mode, which makes
root-causing problems with buggy devices unnecessarily more difficult.
Convert reporting of important HID report descriptor parsing errors to
be reported through hid_err() / hid_warn() instead of dbg_hid().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We depend on memless force-feedback support, therefore correctly select the
related config options.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the relationship between the Wiimote and Wacom self-powered HID
devices and their power supply explicit by adding a "powers" link.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jiri Kosina <jkosina@suse.cz>
The Wacom and Wiimote HID drivers register power supplies for themselves
to indicate their battery levels. Make those power supplies device scope.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccat
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to properly add the hid device to correctly initialize the sysfs state.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reported-by: Fuzhou Chen <fuzhouch@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As reported by Stephen Rothwell:
drivers/hid/hid-input.c: In function 'hidinput_hid_event':
drivers/hid/hid-input.c:865:6: error: 'struct hid_device' has no member
named 'battery_val'
drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member
named 'battery_min'
drivers/hid/hid-input.c:866:3: error: 'struct hid_device' has no member
named 'battery_max'
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some HID devices, such as my Bluetooth mouse, report their battery
strength as an event. Rather than passing it through as a strange
absolute input event, this patch registers it with the power_supply
subsystem as a battery, so that the device's Battery Strength can be
reported to usermode.
The battery appears in sysfs names
/sys/class/power_supply/hid-<UNIQ>-battery, and it is a child of the
battery-containing device, so it should be clear what it's the battery of.
Unfortunately on my current Fedora 16 system, while the battery does
appear in the UI, it is listed as a Laptop Battery with 0% charge (since
it ignores the "capacity" property of the battery and instead computes
it from the "energy*" fields, which we can't supply given the limited
information contained within the HID Report).
Still, this patch is the first step.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Genera Touch told us that 0001 is their single point device
and 0003 is the multitouch one. Apparently, we made the tests
someone having a prototype, and not the final product.
They said it should be safe to do the switch.
This partially reverts 5572da0 ("HID: hid-mulitouch: add support
for the 'Sensing Win7-TwoFinger'").
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device use another protocol while sending the events.
It's the same as the one described as "serial" by Microsoft.
We are keeping here the sn_move and sn_pressure parameters for
egalax devices.
CC: Cedric Sodhi <manday@gmx.net>
CC: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just another eGalax device.
Please note that adding this device to have_special_driver
in hid-core.c is not required anymore.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel
supports up to five fingers, therefore the need for a new addition of panel
types.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N}
to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax
devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some eGalax devices are 4 or 5 fingers touches, wereas others are 2.
This patch removes the limit in which all eGalax presents 2 touches.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous implementation of eGalax protocol was not satisfying as
we had to manually set x/y ranges as they were corrupted after reading
the report descriptor.
Indeed, the report descriptor provided a stylus input interface which
override the correct values.
This patch omits this input, thus leaving the correct value untouched,
and the MT_QUIRK_EGALAX_XYZ_FIXUP not required anymore.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This allows ASUS Eee Slate touchscreens to work.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The LED URB was left unkilled when the USB device is disconnected.
Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usb_kbd_event() and usb_kbd_led() can be called concurrently, but they are not
synchronized. They both readwrite kbd->leds, and usb_kbd_event() originally just
checked the URB status field, while urb.h states that "It [status field] should
not be examined before the URB is returned to the completion handler."
To fix this unsynchronized behavior, this patch introduces a boolean
representing whether the URB is submitted, and a spinlock.
Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Newer bluetooth stack supports the NO_INIT_REPORTS quirk. The wiimote does not
support report initialization so enable it by default.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The version number is not needed at all for in-tree drivers. Upstream git is
used to track module versions.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Keep track of current drm and add new debugfs file which reads or writes the
current DRM.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote provides direct access to parts of its eeprom. This implements read
support for small chunks of the eeprom. This isn't very fast but prevents the
reader from blocking the wiimote stream for too long.
Write support is not yet supported as the wiimote breaks if we overwrite its
memory. Use hidraw to reverse-engineer the eeprom before implementing write
support here.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add initializer and deinitializer for debugfs support. This will later allow raw
eeprom access and direct DRM modifications to debug wiimote behaviour and
further protocol reverse-engineerings.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nintendo Classic Controller extension reports lots of keys, two analog sticks
and two analog buttons. We report all data through extension input device to
userspace.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Nintendo Nunchuck extension reports accelerometer values, one analog stick
and two buttons. See inline comments for data layout.
We report all data to userspace through extension input device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Motion+ reports rotation gyro data which we report to userspace as ABS_RX/Y/Z
values. The device reports them either in fast or slow mode. We adjust the
values to get a linear scale so userspace does not need to know about slow and
fast mode.
The motion+ also reports whether an extension is connected to it. We keep track
of this value and reinitialize the extensions if an extension is plugged or
unplugged.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
All supported extensions report data as 6 byte block. All DRMs with extension
data provide at least 6 extension bytes. Hence a generic handler for all
extension bytes is sufficient and can be called on all DRMs.
The handler distinguishes the input and passes it to the right handler. Motion+
passes data interleaved so we can have Motion+ and a regular extension enabled
simultaneously.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Motion+ and regular extensions are physical adapters for the wiimote so create
one input device for each of them. This also allows to enable only opened
extensions and turn unused extenions off to save battery power.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new sysfs attribute "extension" which returns the currently connected and
initialized extensions.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote extension registers are not fully understood, so we always disable
all extensions on extension-port events. Then we reinitialize and reidentify
them and activate all requested extensions.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add stub functions to read and identify extensions and then initialize all
connected extensions.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote supports several extensions. This adds a separate source file which
handles all extensions and can be disabled at compile-time.
The driver reacts on "plug"-events on the extension port and starts a worker
which initializes or deinitializes the extensions.
Currently, the initialization logic is not fully understood and we can only
detect and enable all extensions when all extensions are deactivated. Therefore,
we need to disable all extensions, then detect and activate them again to react
on "plug"-events.
However, deactivating extensions will generate a new "plug"-event and we will
never leave that loop. Hence, we only support extensions if they are plugged
before the wiimote is connected (or before the ext-input device is opened). In
the future we may support full extension hotplug support, but
reverse-engineering this may take a while.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add helper functions similar to the write-mem helpers but for reading wiimote
memory and eeprom.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wiimote extension and sound support need access to several symbols so move them
into a new header.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extension and sound support for the wiimote are quite complex and will be
implemented in separate source files. Hence rename the current driver to "-core"
suffix so multiple files can be linked into this module.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rename the Kconfig entry for hyperv mouse driver so that it has
HID_ prefix as all the other drivers; while at it, place the entry
for this driver to properly ordered place in Makefile and Kconfig.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The file hid-hyperv.c implements a hid compliant mouse driver for use on a
Hyper-V based system. This driver is currently in the staging area and as part
of the effort to move this driver out of staging, I had posted the driver code
for community review a few weeks ago. This current patch addresses all the
review comments I have gotten to date. All the relevant patches have already
been submitted to the staging tree as well.
As per Greg's suggestion, this patch does not get rid of the code from
the staging area. Once the mouse driver lands under the hid directory,
we will cleanup the staging directory.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB HID Usage Tables spec defines page 6 for Generic Device Controls, the
most useful of which (to me) is Battery Strength.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This converts the drivers in drivers/hid/* to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.
Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
HID 1.11 specification, section 5.10 tells us:
HID class devices support the ability to ignore selected fields in a
report at run- time. This is accomplished by declaring bit field in a
report that is capable of containing a range of values larger than
those actually generated by the control. If the host or the device
receives an out-of-range value then the current value for the
respective control will not be modified.
So we shouldn't be restricted to EV_ABS only.
Reported-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com>
Tested-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Linux should ignore values outside logical min/max range, as they are not
meaningful. This is what at least some of other OSes do, and it also makes
sense (currently the value gets misinterpreted larger up the stack).
Reported-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com>
Tested-by: Denilson Figueiredo de Sá <denilsonsa@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is very basic driver for Wacom Intuos4 Wireless tablet. It supports only
position, pressure and pen buttons. More features will be added in the future.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch doesn't change the way driver works. Parsing logic is now in a
separate function. It's a first step to add Intuos4 Wireless support to
hid-wacom driver.
Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Casting (void *) value returned by kmalloc is useless
as mentioned in Documentation/CodingStyle, Chap 14.
The semantic patch that makes this change is available
in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
This removes the use of the special "macbookair_fn_keys" keyboard
translation table for the MacBookAir4,x models (ie the 2011 refresh).
They use the standard apple_fn_keys[] translation. Apparently only the
old MacBook Air's need a different translation table.
This mirrors the change that commit da617c7cb9 ("HID: consolidate
MacbookAir 4,1 mappings") did for the WELLSPRING6A ones, but does it for
the WELLSPRING6 model used on the MacBookAir4,2.
Reported-and-tested-by: Dirk Hohndel <hohndel@infradead.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joshua V Dillon <jvdillon@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: multitouch: decide if hid-multitouch needs to handle mt devices"
HID: drivers/hid/hid-roccat.c: eliminate a null pointer dereference
HID: hid-apple: add device ID of another wireless aluminium
HID: Add device IDs for Macbook Pro 8 keyboards
This reverts commit 0db3bfc72a (""HID: multitouch: decide if hid-multitouch
needs to handle mt devices").
The generic detection of hid-mt devices has two major flaws, and was
merged prematurely. Firstly, the hid-multitouch gets loaded even when
the device is handled by a special device. Secondly, the patch only
partially duplicates the device whitelist already present in hid-core,
effectively rendering a number of devices non-functional.
Reported-by: Sean Young <sean@mess.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is not possible to take the lock in device if device is NULL.
The mutex_lock is thus moved after the NULL test. New error handling
labels are added at the end to differentiate between the cases where
different sets of locks should be unlocks, and between whether or not
reader should be freed (only on error).
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression E, E1;
identifier f;
statement S1,S2,S3;
@@
if (E == NULL)
{
... when != if (E == NULL || ...) S1 else S2
when != E = E1
*E->f
... when any
return ...;
}
else S3
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With module.h being implicitly everywhere via device.h, the absence
of explicitly including something for EXPORT_SYMBOL went unnoticed.
Since we are heading to fix things up and clean module.h from the
device.h file, we need to explicitly include these files now.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore. Make sure the modular drivers in clocksource
are actually calling out for <module.h> explicitly in advance.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
I've recently bought a Apple wireless aluminum keyboard (model 2011) which is
not yet supported by the kernel - it seems they just changed the device id.
After applying the attached patch, the device is fully functional.
Signed-off-by: Andreas Krist <andreas.krist@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds keyboard support for Macbook Pro 8 models which has
WELLSPRING5A model name and 0x0252, 0x0253 and 0x0254 USB IDs. Trackpad
support for those models are added to bcm5974 in
c331eb580a ("Input: bcm5974 - Add
support for newer MacBookPro8,2).
Signed-off-by: Gökçen Eraslan <gokcen@pardus.org.tr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
PM / Clocks: Remove redundant NULL checks before kfree()
PM / Documentation: Update docs about suspend and CPU hotplug
ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist.
ARM: mach-shmobile: sh7372 A4R support (v4)
ARM: mach-shmobile: sh7372 A3SP support (v4)
PM / Sleep: Mark devices involved in wakeup signaling during suspend
PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image
PM / Hibernate: Do not initialize static and extern variables to 0
PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too
PM / Hibernate: Add resumedelay kernel param in addition to resumewait
MAINTAINERS: Update linux-pm list address
PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs
PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs
PM / Hibernate: Add resumewait param to support MMC-like devices as resume file
PM / Hibernate: Fix typo in a kerneldoc comment
PM / Hibernate: Freeze kernel threads after preallocating memory
PM: Update the policy on default wakeup settings
PM / VT: Cleanup #if defined uglyness and fix compile error
PM / Suspend: Off by one in pm_suspend()
PM / Hibernate: Include storage keys in hibernation image on s390
...
hid-magicmouse was advertising the Apple Magic Trackpad as having 2
buttons (left and right) when it actually only has 1 button.
Advertising multiple buttons makes Xorg disable all button 2 and 3
emulation (using multi-finger clicks). So Xorg users don't get working
right/middle-click emulation out of the box.
This patch makes hid-magicmouse correctly only report one real button
for Magic Trackpad, which in turn makes Xorg enable multi-finger click
support to emulate right/middle buttons.
[http://launchpad.net/bugs/862094]
Signed-off-by: Daniel van Vugt <vanvugt@gmail.com>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove Kconfig dependency for hid-primax driver on CONFIG_EXPERT.
Please see changelog of 73d5e8f77e ("HID: fix up 'EMBEDDED' mess in
Kconfig") for reasoning behind this.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Primax keyboards with the issue this driver addresses report modifier
keys as in band key events instead of as out of band modifier bits,
resulting in the modifier keys generating key up events immediately
before the keys they are intended to modify. This driver rewrites
the raw report data from such keyboards into USB HID 1.11 compliant
report data. It only matches the USB vendor and product IDs for the
keyboard it has been tested on. Since there are several keyboards,
notably a number of laptops and folding USB keyboards known to have
similar unresolved problem reports, the list is expected to grow.
Signed-off-by: Terry Lambert <tlambert@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This makes sure IO is never restarted while a reset is going on
In particular there seems to be no protection from hid_retry_timeout() calling
hid_start_in() which would start IO after hid_pre_reset() has already called
hid_cease_io() because that uses del_timer(), not del_timer_sync()
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We shouldn't change the event flags of input devices after they get registered.
Otherwise, udev will not get notified of these flags and cannot setup the
devices properly.
This fixes the probing to set the input event flags on the input_mapped callback
instead of the probe function.
Reported-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* pm-runtime:
PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set
PM / Runtime: Replace dev_dbg() with trace_rpm_*()
PM / Runtime: Introduce trace points for tracing rpm_* functions
PM / Runtime: Don't run callbacks under lock for power.irq_safe set
USB: Add wakeup info to debugging messages
PM / Runtime: pm_runtime_idle() can be called in atomic context
PM / Runtime: Add macro to test for runtime PM events
PM / Runtime: Add might_sleep() to runtime PM functions
The respective mouse devices are already supported by bcm5974. Now that
Nobuhiro Iwamatsu added support for keyboard to hid-apple driver, we need
to ignore the mouse interfaces of these so that they can still be properly
claimed by bcm5974 driver.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In hidraw_open, if hid_hw_power returns with error, hidraw device open count
should not increase.
Signed-off-by: Amit Nagal <helloin.amit@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Smatch has a new check for Rosenberg type information leaks where
structs are copied to the user with uninitialized stack data in them.
In this case, the hiddev_devinfo struct has a two byte hole.
struct hiddev_devinfo {
__u32 bustype; /* 0 4 */
__u32 busnum; /* 4 4 */
__u32 devnum; /* 8 4 */
__u32 ifnum; /* 12 4 */
__s16 vendor; /* 16 2 */
__s16 product; /* 18 2 */
__s16 version; /* 20 2 */
/* XXX 2 bytes hole, try to pack */
__u32 num_applications; /* 24 4 */
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that hid-generic ignores all win7 compatible multitouch devices, this patch
allows hid-multitouch to catch them. The idea is to rely on the quirk
HID_QUIRK_MULTITOUCH to drop the device if no ContactID is given.
There is the need for a blacklist here as other devices may need a special
driver (ntrig for instance).
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As mentioned by http://www.microsoft.com/whdc/device/input/DigitizerDrvs_touch.mspx
multitouch devices are those that have the input report HID_CONTACTID.
This patch detects this and unloads the generic-usb driver.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There's been a small oversight when adding support for Logitech Driving Force
GT. Entry in hid-core was missing so the generic driver instead of hid-logitech
was being used.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a bug where a device with index 6 would write out of bounds in
the array of paired devices.
This patch fixes that problem.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Olivier Gay <ogay@logitech.com>
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function hidraw_disconnect() only acquires the hidraw minors_lock
when clearing the entry in hidraw_table. However the device_destroy()
call can cause a userland read/write to return with an error. It may
cause the program to release the file descripter before the disconnect
is finished. hidraw_disconnect() has already set hidraw->exist to 0,
which makes hidraw_release() kfree the hidraw structure, which
hidraw_disconnect() continues to access and even tries to kfree again.
Similarly if a hidraw_release() occurs after setting hidraw->exist to 0,
the same thing can happen.
This is fixed by expanding the mutex critical section to cover the whole
function from setting hidraw->exist to 0 to freeing the hidraw
structure, preventing a hidraw_release() from interfering.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The IDEACOM 6650 multitouch chip, present in various all-in-one computers,
uses the serial version of the HID multitouch protocol. No existing class
supports this.
In principle, the new MT_CLS_SERIAL should work for other
serial panels as well, perhaps including some eGalax panels.
Signed-off-by: Stephane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
With this driver, all the devices paired to a single Unifying
receiver are exposed to user processes in separated /input/dev
nodes.
Keyboards with different layouts can be treated differently,
Multiplayer games on single PC (like home theater PC) can
differentiate input coming from different kbds paired to the
same receiver.
Up to now, when Logitech Unifying receivers are connected to a
Linux based system, a single keyboard and a single mouse are
presented to the HID Layer, even if the Unifying receiver can
pair up to six compatible devices. The Unifying receiver by default
multiplexes all incoming events (from multiple keyboards/mice)
into these two.
Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the
hardware supported by the Wacom driver. The DIRECT property is
assigned to devices with an embedded screen (i.e. touchscreens
and display tablets). The POINTER property is assigned to those
without embedded screens.
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In function hidraw_open struct hidraw_list *list should be freed for
all error conditions.
Signed-off-by: Amit Nagal <helloin.amit@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Profile changes were only reported when issued mouse internal. Now all
changes are reported.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduced function kone_profile_activated() to reduce code duplication.
This by the way fixes a wrong initialization value.
Also fixes early mutex unlocks.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Profile changes were only reported when issued mouse internal. Now all
changes are reported.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Profile changes were only reported when issued mouse internal. Now all
changes are reported.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Actual dpi resolution was set on wrong occassion.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID devices can be hotplugged so we should unregister all sysfs attributes when
removing a driver. Otherwise, manually unloading the wacom-driver will not
remove the sysfs attributes. Only when the device is disconnected, they are
removed, eventually.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
power_supply_unregister() must not be called if power_supply_register() failed.
The wdata->psy.dev pointer may point to invalid memory after a failed
power_supply_register() and hence wacom_remove() will fail while calling
power_supply_unregister().
This changes the wacom_probe function to fail if it cannot register the
power_supply devices. If we would want to keep the previous behaviour we had to
keep some flag about the power_supply state and check it on wacom_remove, but
this seems inappropriate here. Hence, we simply fail, too, if
power_supply_register fails.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add entry to MAINTAINERS and also bump version level as the core driver is
feature complete now.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This registers a power_supply device for every remote to retrieve the current
battery charge level. Since this information is not sent by the wiimote
continously, we need to explicitely request it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote does not send status reports continuously so this adds a helper
function to request a status report and parses the battery charge level.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initialize the IR cam if the related input device is opened by userspace. Stop
IR cam again if userspace is no longer interested in its data events.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote IR cam needs a fairly complex initialization sequence. This adds a
helper function that performs IR initialization synchronously.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add helpers to synchronously write registers of the wiimote. This is heavily
used by initialization functions for wiimote peripherals.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
To initialize wiimote peripherals, the stream to the wiimote must be held
exclusively by the initializer, otherwise the initialization will fail. Many
initializations require multiple memory requests to be sent synchronously so we
need a way to lock the stream and release it when we are done.
This adds several helper functions which allow to lock the stream, then send
requests, wait for the answers and release the stream again.
When holding the lock, the function may sleep and interrupted by signals.
Also it returns after a short timeout so userspace shouldn't notice long
delays.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote allows direct access to its memory mapped registers and
internal eeprom. This adds support to access this memory and handle
memory events.
There are two macros which wrap up the memory access functions to avoid
accidentally overwriting sensitive eeprom data because a boolean value
was wrongly set.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If an extension is connected the wiimote may report data though DRMs that
contain extension data. This adds handlers for these DRMs but discards extension
data since we do not support it, yet.
It prints a warning to kernel log if an unhandled report is catched. Since we
handle all requests now, this should never happen, though.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Parse IR data and report it to IR input-device. IR data is sent in 3 different
formats, but we only support the basic format as there is no way to send the
additional information to userspace.
All three formats are compatible with the basic IR data format so we need only
one parser.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The IR cam of the wiimote reports 4 trackable lights as absolute values. Since
we can turn the IR cam on and off, we register a separate input device so we can
react on open/close callbacks to save wiimote battery power when IR cam is not
needed.
The cam can be in four states: off, basic, extended and full
The DRM chooser automatically selects a proper DRM that includes all required IR
data so no information is lost.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add parser functions for accelerometer data reported by the wiimote. The data is
almost always reported in the same format, so we can use a single handler.
However, an own handler function is created for each DRM-mode because when IR
and extension support is added, each of them is parsed differently.
Also set the appropriate DRM including accelerometer data on DRM requests to
actually retrieve the accelerometer data.
Data is reported to userspace as ABS_RX/Y/Z values. The values are between -500
and 500 and 0 means no acceleration. See also userspace xwiimote library for
data parsing.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new input device for every wiimote which is used to report accelerometer
data to userspace. Only if the input device is currently open, we make the
wiimote send accelerometer data. This saves a whole lot of energy on the wiimote
if an application is only interested in button input reports.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote has a single rumble motor. This adds force feedback support for
wiimote devices with FF_RUMBLE. The rumble motor is very simple and only
supports an on/off switch so no complex ff-effects are supported.
This also removes the event callback that was registered before but unused. The
ff-device overwrites this callback, anyway.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds support for the wiimote's rumble device. Every output report can
enable and disable the rumble motor. Hence, every output report must look up our
new RUMBLE flag and make sure that it does not unintentionally toggle the
rumble motor.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is basically a more generic respin of 23746a6 ("HID: magicmouse: ignore
'ivalid report id' while switching modes") which got reverted later by
c3a492.
It turns out that on some configurations, this is actually still the case
and we are not able to detect in runtime.
The device reponds with 'invalid report id' when feature report switching it
into multitouch mode is sent to it.
This has been silently ignored before 0825411ade ("HID: bt: Wait for ACK
on Sent Reports"), but since this commit, it propagates -EIO from the _raw
callback .
So let the driver ignore -EIO as response to 0xd7,0x01 report, as that's
how the device reacts in normal mode.
Sad, but following reality.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=35022
Reported-by: Chase Douglas <chase.douglas@canonical.com>
Reported-by: Jaikumar Ganesh <jaikumarg@android.com>
Tested-by: Chase Douglas <chase.douglas@canonical.com>
Tested-by: Jaikumar Ganesh <jaikumarg@android.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We recently introduced locking into this function, but we missed an
error path which needs an unlock.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote resets the current drm when an extension is plugged in.
Fortunately, it also sends a status report in this situation so we just
reset the drm on every status report to keep the drm consistent.
Also handle return reports from the wiimote which indicate success and
failure of requests that we've sent.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote reports data in several data reporting modes (DRM). The DRM
request makes the wiimote send data in the requested drm.
The DRM mode can be set explicitely or can be chosen by the driver. To let
the driver choose the DRM mode, pass WIIPROTO_REQ_NULL placeholder to it. This
is no valid request and is replaced with an appropriate DRM.
Currently, the driver always sets the basic DRM_K mode, but this will be
extended when further peripherals like accelerometer and IR are supported.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This registers 4 led devices to allow controlling the wiimote leds via standard
LED sysfs API. It removes the four sysfs attributes so we don't have two APIs
for one device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Even though the bluetooth hid backend does not react on open/close callbacks, we
should call them to be consistent with other hid drivers.
Also the new input open/close handlers will be used in future to prepare the
wiimote device for IR/extension input.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new locking scheme in HID core allows us to remove a bit of synchronization.
Since the HID layer acts synchronously we simply register input core last and
there are no synchonization issues anymore.
Also register sysfs files after that to simplify the code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a small rare potential memory leak here. Also Walter Harms
points out that we can do a small cleanup as well by using kstrdup().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks.
These keyboards dont seem to allow the records to be initialized, and hence a
timeout occurs when the usbhid driver attempts to initialize them. The patch
just adds the signature for these keyboards to the hid-quirks list with the
setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the
timeout to occur.
Signed-off-by: Jeremiah Matthey <sprg86@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as1482) adds a macro for testing whether or not a
pm_message value represents an autosuspend or autoresume (i.e., a
runtime PM) event. Encapsulating this notion seems preferable to
open-coding the test all over the place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
This panel is also known as the Dell ST2220Tc.
Signed-off-by: jeffbrown@android.com
Reviewed-By: Benjamin Tissoires <Benjamin_Tissoires@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This change fixes two problems.
First, it ensures that the hid-multitouch driver does not incorrectly
map GenericDesktop usages that are intended for other applications,
such as a Mouse.
Second, it sets the appropriate input properties so that user-space
can distinguish TouchScreen devices (INPUT_PROP_DIRECT) from
TouchPad devices (INPUT_PROP_POINTER) and configure them accordingly.
Signed-off-by: jeffbrown@android.com
Acked-By: Benjamin Tissoires <Benjamin_Tissoires@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Support force feedback on the Dual USB Force Feedback Joypad (MP-8866).
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Do this for backwards compatibility reasons (LOGIWHEELS_FF has
been split-off from LOGITECH_FF), so that users don't have
regressions with 'default' kernel configs.
Reported-and-tested-by: simon@mungewell.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Otherwise the generic driver wouldn't unbind from it and wouldn't
let hid-apple to automatically take over.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added USB device IDs for MacBookAir4,2 keyboard. Device constants were
copied from the MacBookAir3,2 constants. The 4,2 device specification is
reportedly unchanged from the 3,2 predecessor and seems to work well.
Signed-off-by: Joshua V Dillon <jvdillon@gmail.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add touch surface resolution information. The size of the touch surfaces
has been determined to the hundredth of a mm.
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Michael Poole <mdpoole@troilus.org>
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
[jkosina@suse.cz: update comments and commit message]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix a return value propagation that was omitted in David Herrmann's
locking fix around hid_input_report().
Reported-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID low level drivers register new devices with the HID core which then
adds the devices to the HID bus. The HID bus normally immediately probes
an appropriate driver which then handles HID input for this device.
The ll driver now uses the hid_input_report() function to report input
events for a specific device. However, if the HID bus unloads the driver
at the same time (for instance via a call to
/sys/bus/hid/devices/<dev>/unbind) then the hdev->driver pointer may be
used by hid_input_report() and hid_device_remove() at the same time
which may cause hdev->driver to point to invalid memory.
This fix adds a semaphore to every hid device which protects
hdev->driver from asynchronous access. This semaphore is locked during
driver *_probe and *_remove and also inside hid_input_report(). The
*_probe and *_remove functions may sleep so the semaphore is good here,
however, hid_input_report() is in atomic context and hence only uses
down_trylock(). If it cannot acquire the lock it simply drops the input
package.
The low-level drivers report input events synchronously so
hid_input_report() should never be entered twice at the same time on the
same device. Hence, the lock should always be available. But if the
driver is currently probed/removed then the lock is not available and
dropping the package should be safe because this is what would have
happened if the package arrived some milliseconds earlier/later.
This also fixes another race condition while probing drivers:
First the *_probe function of the driver is called and only if that
succeeds, the related input device of hidinput is registered. If the low
level driver reports input events after the *_probe function returned
but before the input device is registered, then a NULL pointer
dereference will occur. (Equivalently on driver remove function).
This is not possible anymore, since the semaphore lock drops all
incoming packages until the driver/device is fully initialized.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
No need for freeing pm in case when it's not allocated.
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Bojan Prtvar <prtvar.b@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech driver sends Formula Force EX wheel a different command to
autocenering force. FFEX will accept the standard command used by the rest of
the wheels, but it won't set the centering properly.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one. Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch allows the lg4ff driver to switch wheels to the native mode. Since
this is specific to Logitech wheels only, it's handled in hid-lg4ff rather than
hid-lg.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This is the first out of five patches me and Simon Wood (CC'd) have been
working on. It separates the handling of Logite from the generic lgff driver
and adds additional features specific for the Logitech wheels, namely
- Native mode support for Driving Force GT, Driving Force Pro, G25 and G27
wheels Every Logitech wheel reports itself as generic Logitech Driving Force
wheel (VID 046d, PID c294). This is done to ensu wheel will work on every USB
HID-aware system even when no Logitech driver is available. It however limits
the capabilit wheel - range is limited to 200 degrees, G25/G27 don't report the
clutch pedal and there is only one combined axis for t brake. The switch to
native mode is done via hardware-specific command which is different for each
wheel. When the wheel receives such command, it simulates reconnect and reports
to the OS with its actual PID.
- Adjustable wheel range DFGT, DFP, G25 and G27 have variable range of the
steering wheel. The range is limited by applying a maximum constant when the
wheel is turned beyond the allowed range. The limit as also set by a
hardware-specific command. There is a comm command for DFGT, G25 and G27 and
another one for DFP. It is probably possible to use the DFP command to limit
the range other Logitech wheels too, but this is not supported by the official
Logitech driver for Windows. The patch adds a sysfs interface which allows for
the range to be set from userspace.
- Fixed autocentering command All Logitech wheels support FF_AUTOCENTER effect.
The original implementation in the lgff driver didn't work well with patch
fixes it. According to USB communication sniffs the Formula Force EX (pretty
much rebranded original Driving Force accept the generic autocentering command,
this issue is also addressed by the patch
There are still some features this patch doesn't cover, but since some of them
will most likely require modifications of memless driver we have decided not to
include them yet.
As first we decided to move the handling of Logitech wheels from hid-lgff
driver to hid-lg4ff driver (originally used fo At also adds PID of Logitech
Driving Force GT.
Signed-off-by: Michal Malý <madcatxster@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There are gamepads that share the same VID and PID but have different
report structure - instead of having 4 fields with one value they have
one field that can hold all 4 values. Make the driver cope with devices
using both styles.
Signed-off-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The config option needs to be a 'bool' and not a tristate, otheriwse
force feedback support never makes it into the module.
Signed-off-by: Sergei Kolzun <x0r@dv-life.ru>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add USB device ids for the new revision (MB110LL/B) of Apple's wired aluminum
keyboard. I have only confirmed that the ANSI version is correct - it is
assumed that the ISO and JIS versions follow the standard numbering convention.
Signed-off-by: Dan Bastone <dan@pwienterprises.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for the CSR panel built by XAT.
Signed-off-by: Ice Chien <ice.chien@accupoint.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The following symbols are not referenced outside this file so
there's no need for it to be in the global name space.
pcmidi_sustained_note_release
init_sustain_timers
stop_sustain_timers
pcmidi_handle_report
pcmidi_setup_extra_keys
pcmidi_snd_initialise
pcmidi_snd_terminate
Make them static.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_hw_stop() must be called in ax_probe() error path if hid_hw_start()
was successful.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft comfort mouse 4500 report descriptor contains duplicate
usages for horizontal wheel. This patch fixes the wrong mapping
caused by that.
Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for UC-Logic Tablet WP1062 by fixing its report descriptor.
This tablet is sold as Monoprice 10X6.25 Inches Graphic Drawing Tablet.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add sysfs files for each led of the wiimote. Writing 1 to the file
enables the led and 0 disables the led.
We do not need memory barriers when checking wdata->ready since we use
a spinlock directly after it.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Save the current state of the leds in the wiimote data structure. This
allows us to discard new led requests that wouldn't change anything.
Protect the whole state structure by a spinlock. Every wiiproto_*
function expects this spinlock to be held when called.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new request that sets the leds on the target device. Also, per
default, set led1 after initializing a device.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Parse input report 0x30 from the wiimote as button input. We need to
send events for all buttons on every input report because the wiimote
does not send events for single buttons but always for all buttons
to us. The input layer, however, filters redundant events.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Create array of all event handlers and call each handler when we
receive the related event.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The raw hid output function that is supported by bluetooth low-level
hid driver does not provide an output queue and also may sleep. The
wiimote driver, though, may need to send data in atomic context so
this patch adds a buffered output queue for the wiimote driver.
We use the shared workqueue to send our buffer to the hid device.
There is always only one active worker which flushes the whole output
queue to the device. If our queue is full, every further
output is discarded.
Special care is needed in the deinitialization routine. When
wiimote_hid_remove is called, HID input is already disabled, but HID
output may still be used from our worker and is then discarded by the
lower HID layers. Therefore, we can safely disable the input layer since it
is the only layer that still sends input events.
Future sysfs attributes must be freed before unregistering input to
avoid the sysfs handlers to send input events to a non-existing input
layer.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote driver needs to send raw output reports to the wiimote
device. Otherwise we could not manage the peripherals of the wiimote
or perform memory operations on the wiimote.
We cannot use hidinput_input_event of the lowlevel hid driver, since
this does not accept raw input. Therefore, we need to use the same
function that hidraw uses to send output. Side effect is, the raw
output function is not buffered and can sleep.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote first starts HID hardware and then registers the input
device. We need to synchronize the startup so no event handler will
start parsing events when the wiimote device is not ready, yet.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Register input device so the wiimote can report input events on
it. We do not use HIDINPUT because the wiimote does not provide any
descriptor table which might be used by HIDINPUT. So we avoid
having HIDINPUT parse the wiimote descriptor and create unrelated
or unknown event flags. Instead we register our own input device
that we have full control of.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allocate wiimote device structure with all wiimote related data
when registering new wiimote devices.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The wiimote uses a fake HID protocol. Hence, we need to prevent
HIDINPUT and HIDDEV from parsing wiimote data and instead parse
raw hid events.
Add VID/PID to hid-core so the special driver is loaded on new
wiimotes.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add stub driver for the Nintendo Wii Remote. The wii remote uses
the HID protocol to communicate with the host over bluetooth. Hence,
add dependency for HIDP and place driver in hid subsystem.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add force feedback support for Holtek On Line Grip based HID devices.
The protocol is more complex than that of most other rumblepads, but the
device still needs to be handled as a memoryless one.
Tested by Cleber de Mattos Casali with a 1241:5015 "Clone Joypad Super
Power Fire" gamepad, with help from Hendrik Iben <hendrik_iben@web.de>.
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Cleber de Mattos Casali <clebercasali@yahoo.com.br>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
while merging hid-stantum into hid-multitouch, I did not correctly copy/paste
the VIDs for those devices. This patch fixes it.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In case a device does not provide the feature "Maximum Contact Count",
or set it at 0, the maxcontacts field may be at 0 while calling
input_mt_init_slots.
This patch ensures that hid-multitouch will allways report
ABS_MT_SLOT and ABS_MT_TRACKING_ID to the user space.
This corrects a bug found with some Ilitek devices that has been
integrated in 3.0-rc0.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 23746a66d7.
It turned out that the actual reason for failure is not the device
firmware, but bug in Bluetooth stack, which will be fixed by
patch by Ville Tervo which corrects the mask handling for CSR 1.1
Dongles.
Reported-and-tested-by: Ed Tomlinson <edt@aei.ca>
Reported-and-tested-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Digital Media 3000 keyboard (USB id: 0x0730) features the same 1-5
Application Launch keys that the Natural Ergonomic 4000 has. Add its
usb id to the list of quirks.
Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The accelerometers/gyro on the Sixaxis are reported in the wrong
endianness (ie. not compatible with HID), so this patch intercepts
the report and swaps the appropriate bytes over.
Accelerometers are scaled with a nominal value of +/-4000 = 1G,
maximum value would be around +/-32768 = 8G.
Gyro on my device always reports -32768, might need some calibration
set within the controller.
Fix extracted from previous patch submission:
https://patchwork.kernel.org/patch/95212/
Signed-off-by: Marcin Tolysz <tolysz@gmail.com>
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On rare occassions raw events can be triggered before drvdata gets set up
which leads to NULL pointer dereferences. This was only observed with pyra on
2.6.39, but is fixed for all devices now to play it save.
kovaplus returned wrong actual values when profile change was initiated from host.
Added range checks for setting actual profile on all devices.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Removed analog feature report enums and modified code in roccat_common
to reflect this. Non standard conform Kone got its own copy of the old
code. That helps extracting more generalizations for newer devices.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As module roccat is needed by all devices, it's the toplevel
menu entry with all devices dependent.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added binary sysfs attribute to support new functionality the manufacturer
added to koneplus.
Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since the inclusion of eGalax devices in 2.6.39, I've got some
bug reports for 480d and other devices.
The problem lies in the reports descriptors: eGalax supports both
pen and fingers, and so the reports descriptors contained both.
But hid-multitouch relies on them to detect the last item in each
field to send the multitouch events. In 480d, the last item is not
Y as it should but Pressure. That means that the fields are not
aligned and X,Y are at 0,0 (the other touch coordinates of the report).
With this patch, the detection is made only when the field ContactID
has been detected inside the collection.
There is still a problem with the detections of the range as stylus
and fingers may not have the same min/max, but it's a start.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
place to another every now and then. The issue are relative motion events
erroneously reported by the device, each having a distance value of +256. This
256 can in fact never occur due to real motion, therefore those events can
safely be ignored. The driver also drops useless EV_REL events with a value of
0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
Signed-off-by: Stefan Kriwanek <mail@stefankriwanek.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- Add the quirk "NOGET" to make the wheel work at all in native mode.
- Replace the somehow broken report descriptor with a custom one to have
separate throttle and brake axes.
As there are significant differences in the descriptor (original descriptor
"hides" the separate axes in a 24 bit FF00 usagepage, new descripter replaces
that with two individual 8 bit desktop.y and desktop.rz usages) I provided a
complete replacement descriptor instead trying to patch the original one.
Patching the descriptor seems not feasible as the new one is much larger.
Note: To actually test this you have to use the tool "ltwheelconf" to put the
DFP into it's native mode - See below for more info.
Background:
Most Logitech wheels are initially reporting themselves with a "fallback"
deviceID (USB_DEVICE_ID_LOGITECH_WHEEL - 0xc294), in order to make sure they
are working even without having the proper driver installed.
If the Logitech driver is installed it sends a special command to the wheel
which sets the wheel to "native mode", enabling enhance features like:
- Clutch pedal
- extended wheel rotation range (up to 900 degrees)
- H-gate shifter
- separate axis for throttle / brake
- all buttons
When the wheel is set to native mode it basically disconnects and reconnects
with a different deviceID (USB_DEVICE_ID_LOGITECH_DFP_WHEEL - 0xc298 in this
case).
I am working on a userspace tool [1] which does the switching from fallback to
native mode. During development I found out that the Driving Force Pro wheel
is not supported in native mode - quierk NOGET is missing and the throttle and
brake axes are reported in a combined way only.
Signed-off-by: Michael Bauer <michael@m-bauer.org>
Signed-off-by: Simon Wood <simon@mungewell.org>
[1] https://github.com/TripleSpeeder/LTWheelConf
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dmitry Torokhov