KBUILD_MODNAME provides the same value.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_device's name variable is not set to anything.
The common devname for request_irq seems to be the module
name. This will fix the seemingly anonymous interrupt
entry in /proc/interrupts for crypto4xx.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the crypto4xx RevB cores
found in the 460EX, 460SX and later cores (like the APM821xx).
Without this patch, the crypto4xx driver will not be
able to process any offloaded requests and simply hang
indefinitely.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible to avoid the ce_base null pointer check in the
drivers' interrupt handler routine "crypto4xx_ce_interrupt_handler()"
by simply doing the iomap in front of the IRQ registration.
This way, the ce_base will always be valid in the handler and
a branch in an critical path can be avoided.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All hardware crypto devices have their CONFIG names using the following
convention:
CRYPTO_DEV_name_algo
This patch apply this conventions on STM32 CONFIG names.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offload split key generation in CAAM engine, using DKP.
DKP is supported starting with Era 6.
Note that the way assoclen is transmitted from the job descriptor
to the shared descriptor changes - DPOVRD register is used instead
of MATH3 (where available), since DKP protocol thrashes the MATH
registers.
The replacement of MDHA split key generation with DKP has the side
effect of the crypto engine writing the authentication key, and thus
the DMA mapping direction for the buffer holding the key has to change
from DMA_TO_DEVICE to DMA_BIDIRECTIONAL.
There are two cases:
-key is inlined in descriptor - descriptor buffer mapping changes
-key is referenced - key buffer mapping changes
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Save Era in driver's private data for further usage,
like deciding whether an erratum applies or a feature is available
based on its value.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ablkcipher shared descriptors are relatively small, thus there is enough
space for the key to be inlined.
Accordingly, there is no need to copy the key in ctx->key.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Key data is not modified, it is copied in the shared descriptor.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Inside Secure SafeXcel driver was firstly designed to support the
EIP197 cryptographic engine which is an evolution (with much more
feature, better performances) of the EIP97 cryptographic engine. This
patch convert the Inside Secure SafeXcel driver to support both engines
(EIP97 + EIP197).
The main differences are the register offsets and the context
invalidation process which is EIP197 specific. This patch adds an
indirection on the register offsets and adds checks not to send any
invalidation request when driving the EIP97. A new compatible is added
as well to bind the driver from device trees.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dequeueing function was putting back a request in the crypto queue
on failure (when not enough resources are available) which is not
perfect as the request will be handled much later. This patch updates
this logic by keeping a reference on the failed request to try
proceeding it later when enough resources are available.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch modifies the result handling logic to continue handling
results when the completed requests counter is full and not showing the
actual number of requests to handle.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches moves the result request acknowledgment from a per request
process to acknowledging all the result requests handled at once.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase the ring size to handle more requests in parallel, while
keeping the batch size (for interrupt coalescing) to its previous value.
The ring size and batch size are now unlinked.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the dequeueing logic to dequeue all requests at once.
Since we can have many requests in the queue, the interrupt coalescing
is kept so that the ring interrupt fires every EIP197_MAX_BATCH_SZ at
most.
To allow dequeueing all requests at once while still using reasonable
settings for the interrupt coalescing, the result handling function was
updated to setup the threshold interrupt when needed (i.e. when more
requests than EIP197_MAX_BATCH_SZ are in the queue). When using this
capability the ring is marked as busy so that the dequeue function
enqueue new requests without setting the threshold interrupt.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the result handling from an IRQ handler to a threaded
IRQ handler, to improve the number of complete requests being handled at
once.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch moves the request dequeueing into a workqueue to improve the
coalescing of interrupts when sending requests to the engine; as the
engine is capable of having one single interrupt for n requests sent.
Using a workqueue allows to send more request at once.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SafeXcel context isn't used in the cache invalidation function. This
cosmetic patch removes it (as well as from the function prototype in the
header file and when the function is called).
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cipher direction can be different for requests within the same
transformation context. This patch moves the direction flag from the
context to the request scope.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When initializing the IVs crypto_ahash_update() is called, which at some
point will call crypto_enqueue_request(). This function can return
-EBUSY when no resource is available and the request is queued. Since
this is a valid case, -EBUSY shouldn't be treated as an error.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The check to know if an invalidation is needed (i.e. when the context
changes) is done even if the context does not exist yet. This happens
when first setting a key for ciphers and/or hmac operations.
This commits adds a check in the _setkey functions to only check if an
invalidation is needed when a context exists, as there is no need to
perform this check otherwise.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message and added a comment and reworked one of the
checks]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic patch adding a few comments to the ahash caching function to
understand easily what calculations are made in the functions; and how
the function is working.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes an useless memset in the ahash_export function, as
the zeroed buffer will be entirely overridden the next line.
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic patch fixing one typo in one of the driver's comments.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic patch removing an extra empty line between header inclusions.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hardware operations like reading random numbers and setting a seed need
to be conducted in a single thread. Therefore a mutex is required to
prevent multiple threads (processes) from accessing the hardware at the
same time.
The sequence of mutex_lock() and mutex_unlock() in the exynos_rng_reseed()
function enables switching between different threads waiting for the
driver to generate random numbers for them.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reseed PRNG after reading 65 kB of randomness. Although this may reduce
performance, in most cases the loss is not noticeable. Also the time
based threshold for reseeding is changed to one second. Reseeding is
performed whenever either limit is exceeded.
Reseeding of a PRNG does not increase entropy, but it helps preventing
backtracking the internal state of the device from its output sequence,
and hence, prevents potential attacker from predicting numbers to be
generated.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use memcpy_fromio() instead of custom exynos_rng_copy_random() function
to retrieve generated numbers from the registers of PRNG.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for PRNG in Exynos5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The IV size should not include the 32 bit counter. Because we had the
IV size set as 16 the transform only worked when the IV input was zero
padded.
Fixes: a21eb94fc4 ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver")
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Passing the register value by reference here leads a large amount of stack being
used when CONFIG_KASAN is enabled:
drivers/crypto/qat/qat_common/qat_hal.c: In function 'qat_hal_exec_micro_inst.constprop':
drivers/crypto/qat/qat_common/qat_hal.c:963:1: error: the frame size of 1792 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Changing the register-read function to return the value instead reduces the stack
size to around 800 bytes, most of which is for the 'savuwords' array. The function
now no longer returns an error code, but nothing ever evaluated that anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patches update the SafeXcel driver to stop using the crypto
ahash_request result field for partial results (i.e. on updates).
Instead the driver local safexcel_ahash_req state field is used, and
only on final operations the ahash_request result buffer is updated.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch makes use of the SKCIPHER_REQUEST_ON_STACK and
AHASH_REQUEST_ON_STACK helpers to allocate enough memory to contain both
the crypto request structures and their embedded context (__ctx).
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch frees the request private data even if its handling failed,
as it would never be freed otherwise.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Suggested-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When an invalidation request is needed we currently override the context
.send and .handle_result helpers. This is wrong as under high load other
requests can already be queued and overriding the context helpers will
make them execute the wrong .send and .handle_result functions.
This commit fixes this by adding a needs_inv flag in the request to
choose the action to perform when sending requests or handling their
results. This flag will be set when needed (i.e. when the context flag
will be set).
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Antoine: commit message, and removed non related changes from the
original commit]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
exynos-rng is one of many implementations of stdrng. With priority as
low as 100 it isn't selected, if software implementations (DRBG) are
available. The value 300 was selected to give the PRNG priority before
software implementations, but allow them to be selected in FIPS-mode
(fips=1 in the kernel command line).
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
fix a type cast error for queue descriptor
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
queue_cache_init is first called for the Control Word Queue
(n2_crypto_probe). At that time, queue_cache[0] is NULL and a new
kmem_cache will be allocated. If the subsequent n2_register_algs call
fails, the kmem_cache will be released in queue_cache_destroy, but
queue_cache_init[0] is not set back to NULL.
So when the Module Arithmetic Unit gets probed next (n2_mau_probe),
queue_cache_init will not allocate a kmem_cache again, but leave it
as its bogus value, causing a BUG() to trigger when queue_cache[0] is
eventually passed to kmem_cache_zalloc:
n2_crypto: Found N2CP at /virtual-devices@100/n2cp@7
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
n2_crypto: md5 alg registration failed
n2cp f028687c: /virtual-devices@100/n2cp@7: Unable to register algorithms.
called queue_cache_destroy
n2cp: probe of f028687c failed with error -22
n2_crypto: Found NCP at /virtual-devices@100/ncp@6
n2_crypto: Registered NCS HVAPI version 2.0
called queue_cache_init
kernel BUG at mm/slab.c:2993!
Call Trace:
[0000000000604488] kmem_cache_alloc+0x1a8/0x1e0
(inlined) kmem_cache_zalloc
(inlined) new_queue
(inlined) spu_queue_setup
(inlined) handle_exec_unit
[0000000010c61eb4] spu_mdesc_scan+0x1f4/0x460 [n2_crypto]
[0000000010c62b80] n2_mau_probe+0x100/0x220 [n2_crypto]
[000000000084b174] platform_drv_probe+0x34/0xc0
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without the gf128mul library support, we can run into a link
error:
drivers/crypto/chelsio/chcr_algo.o: In function `chcr_update_tweak':
chcr_algo.c:(.text+0x7e0): undefined reference to `gf128mul_x8_ble'
This adds a Kconfig select statement for it, next to the ones we
already have.
Cc: <stable@vger.kernel.org>
Fixes: b8fd1f4170 ("crypto: chcr - Add ctr mode and process large sg entries for cipher")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the case where skb->ip_summed != CHECKSUM_PARTIAL then cntrl contains
garbage value and this is possibly being bit-wise or'd and stored into
cpl->ctrl1. Fix this by initializing cntrl to zero.
Cleans up clang warning:
drivers/crypto/chelsio/chcr_ipsec.c:374:9: warning: The left expression
of the compound assignment is an uninitialized value. The computed value
will also be garbage
Fixes: 6dad4e8ab3 ("chcr: Add support for Inline IPSec")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variables adap, pi and cntrl are assigned but are never read, hence
they are redundant and can be removed.
Cleans up various clang build warnings.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The arrays sgl_ent_len and dsgl_ent_len are local to the source and do
not need to be in global scope, so make them static. Also re-format the
declarations to match the following round_constant array declaration
style.
Cleans up sparse warnings:
drivers/crypto/chelsio/chcr_algo.c:76:14: warning: symbol 'sgl_ent_len'
was not declared. Should it be static?
drivers/crypto/chelsio/chcr_algo.c:81:14: warning: symbol 'dsgl_ent_len'
was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fix the following build failure:
CC [M] drivers/crypto/stm32/stm32-cryp.o
In file included from drivers/crypto/stm32/stm32-cryp.c:11:0:
drivers/crypto/stm32/stm32-cryp.c:1049:25: error: 'sti_dt_ids' undeclared here (not in a function)
MODULE_DEVICE_TABLE(of, sti_dt_ids);
Let's replace sti_dt_ids with stm32_dt_ids which is just declared
before.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix below warnings on ARMv7 by using %zu for printing size_t values:
drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG
qm_sg_ents, CAAM_QI_MAX_AEAD_SG);
^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
^
drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc:
drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=]
sizeof(struct qm_sg_entry))
^
drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG
qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG);
^
Fixes: eb9ba37dc1 ("crypto: caam/qi - handle large number of S/Gs case")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEV_PDH_CERT_EXPORT command can be used to export the PDH and its
certificate chain. The command is defined in SEV spec section 5.10.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
The SEV_PEK_CERT_IMPORT command can be used to import the signed PEK
certificate. The command is defined in SEV spec section 5.8.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
The SEV_PEK_CSR command can be used to generate a PEK certificate
signing request. The command is defined in SEV spec section 5.7.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
The SEV_PDH_GEN command is used to re-generate the Platform
Diffie-Hellman (PDH) key. The command is defined in SEV spec section
5.6.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Gary R Hook <gary.hook@amd.com>
The SEV_PEK_GEN command is used to generate a new Platform Endorsement
Key (PEK). The command is defined in SEV spec section 5.6.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Borislav Petkov <bp@suse.de>
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
The SEV_PLATFORM_STATUS command can be used by the platform owner to
get the current status of the platform. The command is defined in
SEV spec section 5.5.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Gary R Hook <gary.hook@amd.com>
The SEV_FACTORY_RESET command can be used by the platform owner to
reset the non-volatile SEV related data. The command is defined in
SEV spec section 5.4
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
AMD's new Secure Encrypted Virtualization (SEV) feature allows the
memory contents of virtual machines to be transparently encrypted with a
key unique to the VM. The programming and management of the encryption
keys are handled by the AMD Secure Processor (AMD-SP) which exposes the
commands for these tasks. The complete spec is available at:
http://support.amd.com/TechDocs/55766_SEV-KM%20API_Specification.pdf
Extend the AMD-SP driver to provide the following support:
- an in-kernel API to communicate with the SEV firmware. The API can be
used by the hypervisor to create encryption context for a SEV guest.
- a userspace IOCTL to manage the platform certificates.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
The Platform Security Processor (PSP) is part of the AMD Secure
Processor (AMD-SP) functionality. The PSP is a dedicated processor
that provides support for key management commands in Secure Encrypted
Virtualization (SEV) mode, along with software-based Trusted Execution
Environment (TEE) to enable third-party trusted applications.
Note that the key management functionality provided by the SEV firmware
can be used outside of the kvm-amd driver hence it doesn't need to
depend on CONFIG_KVM_AMD.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: linux-crypto@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Improvements-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
This is AMD-specific hardware so present it in Kconfig only when AMD
CPU support is enabled or on ARM64 where it is also used.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gary Hook <gary.hook@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
'dev' is leaking in the error handling path of 'hifn_probe()'.
Add a 'kfree(dev)' to match the code in 'hifn_remove()'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
register xfrmdev_ops callbacks, Send IPsec tunneled data
to HW for inline processing.
The driver use hardware crypto accelerator to encrypt and
generate ICV for the transmitted packet in Inline mode.
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The object info is being leaked on an error return path, fix this
by setting ret to -ENOMEM and exiting via the request_cleanup path
that will free info.
Detected by CoverityScan, CID#1408439 ("Resource Leak")
Fixes: c694b23329 ("crypto: cavium - Add the Virtual Function driver for CPT")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in pr_err error message text. Also
fix spelling mistake in proceeding comment.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This code seems correct, but the goto was indented too far.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The dma_map_sg() function returns zero on error and positive values on
success. We want to return -ENOMEM on failure here and zero on success.
Fixes: 2f47d58043 ("crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer reqctx is assigned the same value twice, once on initialization
and again a few statements later, remove the second redundant assignment.
Variable dst_size is assigned but it is never read, so the variable is
redundant and can be removed. Cleans up clang warnings:
drivers/crypto/chelsio/chcr_algo.c:156:29: warning: Value stored to
'reqctx' during its initialization is never read
drivers/crypto/chelsio/chcr_algo.c:2020:2: warning: Value stored to
'dst_size' is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This module registers block cipher algorithms that make use of the
STMicroelectronics STM32 crypto "CRYP1" hardware.
The following algorithms are supported:
- aes: ecb, cbc, ctr
- des: ecb, cbc
- tdes: ecb, cbc
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Non-highlights:
- Five fixes for the >128T address space handling, both to fix bugs in our
implementation and to bring the semantics exactly into line with x86.
Highlights:
- Support for a new OPAL call on bare metal machines which gives us a true NMI
(ie. is not masked by MSR[EE]=0) for debugging etc.
- Support for Power9 DD2 in the CXL driver.
- Improvements to machine check handling so that uncorrectable errors can be
reported into the generic memory_failure() machinery.
- Some fixes and improvements for VPHN, which is used under PowerVM to notify
the Linux partition of topology changes.
- Plumbing to enable TM (transactional memory) without suspend on some Power9
processors (PPC_FEATURE2_HTM_NO_SUSPEND).
- Support for emulating vector loads form cache-inhibited memory, on some
Power9 revisions.
- Disable the fast-endian switch "syscall" by default (behind a CONFIG), we
believe it has never had any users.
- A major rework of the API drivers use when initiating and waiting for long
running operations performed by OPAL firmware, and changes to the
powernv_flash driver to use the new API.
- Several fixes for the handling of FP/VMX/VSX while processes are using
transactional memory.
- Optimisations of TLB range flushes when using the radix MMU on Power9.
- Improvements to the VAS facility used to access coprocessors on Power9, and
related improvements to the way the NX crypto driver handles requests.
- Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh
Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao,
Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R.
Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren
Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami
Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de
Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen
Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, William A. Kennington III.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rq81
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A bit of a small release, I suspect in part due to me travelling for
KS. But my backlog of patches to review is smaller than usual, so I
think in part folks just didn't send as much this cycle.
Non-highlights:
- Five fixes for the >128T address space handling, both to fix bugs
in our implementation and to bring the semantics exactly into line
with x86.
Highlights:
- Support for a new OPAL call on bare metal machines which gives us a
true NMI (ie. is not masked by MSR[EE]=0) for debugging etc.
- Support for Power9 DD2 in the CXL driver.
- Improvements to machine check handling so that uncorrectable errors
can be reported into the generic memory_failure() machinery.
- Some fixes and improvements for VPHN, which is used under PowerVM
to notify the Linux partition of topology changes.
- Plumbing to enable TM (transactional memory) without suspend on
some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND).
- Support for emulating vector loads form cache-inhibited memory, on
some Power9 revisions.
- Disable the fast-endian switch "syscall" by default (behind a
CONFIG), we believe it has never had any users.
- A major rework of the API drivers use when initiating and waiting
for long running operations performed by OPAL firmware, and changes
to the powernv_flash driver to use the new API.
- Several fixes for the handling of FP/VMX/VSX while processes are
using transactional memory.
- Optimisations of TLB range flushes when using the radix MMU on
Power9.
- Improvements to the VAS facility used to access coprocessors on
Power9, and related improvements to the way the NX crypto driver
handles requests.
- Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew
Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin
Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard,
Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven,
Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley,
Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu,
Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia
Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee,
Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel
Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A.
Kennington III"
* tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits)
powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
powerpc/64s: Fix masking of SRR1 bits on instruction fault
powerpc/64s: mm_context.addr_limit is only used on hash
powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary
powerpc/64s/hash: Fix fork() with 512TB process address space
powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Fix 512T hint detection to use >= 128T
powerpc: Fix DABR match on hash based systems
powerpc/signal: Properly handle return value from uprobe_deny_signal()
powerpc/fadump: use kstrtoint to handle sysfs store
powerpc/lib: Implement UACCESS_FLUSHCACHE API
powerpc/lib: Implement PMEM API
powerpc/powernv/npu: Don't explicitly flush nmmu tlb
powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm()
powerpc/powernv/idle: Round up latency and residency values
powerpc/kprobes: refactor kprobe_lookup_name for safer string operations
powerpc/kprobes: Blacklist emulate_update_regs() from kprobes
powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace
powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
We are using percpu send window on P9 NX (powerNV) instead of opening
/ closing per each crypto session. Means txwin is removed from
workmem. So we do not need to initialize workmem for each request.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For P9 NX, the send window is opened for each crypto session and
closed upon free. But VAS supports 64K windows per chip for all
coprocessors including in user space support. So there is a
possibility of not getting the window for kernel requests.
This patch reserves windows for each coprocessor type (NX842) and are
available forever for kernel requests, Opens each window for each CPU
on the corresponding chip during driver initialization. So then use
the percpu txwin for NX requests depends on the CPU on which the
process is executing.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define a helper, chip_to_vas_id() to map a given chip id to corresponding
vas id.
Normally, callers of vas_rx_win_open() and vas_tx_win_open() want the VAS
window to be on the same chip where the calling thread is executing. These
callers can pass in -1 for the VAS id.
This interface will be useful if a thread running on one chip wants to open
a window on another chip (like the NX-842 driver does during start up).
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When data append reached the threshold for processing,
we must inform that processing is on going to wait before
managing the next request.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Neither 'p' nor 'g' can be NULL, as they were unpacked using
crypto_dh_decode_key(). And it makes no sense for them to be optional.
So remove the NULL checks that were copy-and-pasted into both modules.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the error handling in qat_dh_set_secret() to mirror
dh_set_secret(). The new version is less error-prone because freeing
memory and setting the pointers to NULL is now only done in one place.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: linux-arm-kernel@axis.com
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Lars Persson <lars.persson@axis.com> # for axis
Make use of the swap macro and remove unnecessary variable temp.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct platform_device_id should be NULL terminated to let the core detect
where the last entry is.
Fixes: 07c50a8be41a ("crypto: marvell - Add a platform_device_id table")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pointer members of an object with static storage duration, if not
explicitly initialized, will be initialized to a NULL pointer.
The crypto API checks if these pointers are not NULL before using them,
therefore we can safely remove these empty functions.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ctx_map_to_sec4_sg() function, added in
commit 045e36780f ("crypto: caam - ahash hmac support")
has never used the "desc" parameter, so let's drop it.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extended descriptor allocation has been changed by
commit dde20ae9d6 ("crypto: caam - Change kmalloc to kzalloc to avoid residual data")
to provide zeroized memory, meaning we no longer have to sanitize
its members - edesc->src_nents and edesc->dst_dma.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When using the rfc4543(gcm(aes))) mode, the registers of the hardware
engine are not empty after use. If the engine is not reset before its
next use, the following results will be invalid.
Always reset the hardware engine.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Certain cipher modes like CTS expect the IV (req->info) of
ablkcipher_request (or equivalently req->iv of skcipher_request) to
contain the last ciphertext block when the {en,de}crypt operation is done.
Fix this issue for the Atmel AES hardware engine. The tcrypt test
case for cts(cbc(aes)) is now correctly passed.
In the case of in-place decryption, copy the ciphertext in an
intermediate buffer before decryption.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
It uses the crypto framework asynchronous hash api.
It is based on omap-sham.c driver.
S5P has some HW differencies and is not implemented.
Modifications in s5p-sss:
- Add hash supporting structures and functions.
- Modify irq handler to handle both aes and hash signals.
- Resize resource end in probe if EXYNOS_HASH is enabled in
Kconfig.
- Add new copyright line and new author.
- Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
with crypto run-time self test testmgr
and with tcrypt module with: modprobe tcrypt sec=1 mode=N
where N=402, 403, 404 (MD5, SHA1, SHA256).
Modifications in drivers/crypto/Kconfig:
- Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
and CRYPTO_DEV_S5P
- Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
as they are needed for fallback.
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change #define lines to use tabs consistently.
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: linux-arm-kernel@axis.com
Cc: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
caam/qi frontend (i.e. caamalg_qi) mustn't be used in case it runs on a
DPAA2 part (this could happen when using a multiplatform kernel).
Fixes: 297b9cebd2 ("crypto: caam/jr - add support for DPAA2 parts")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
irq would be set to -1 and then unused, if we failed to get IORESOURCE_MEM.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The mediatek driver starts several async crypto ops and waits for their
completions. Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The qce driver starts several async crypto ops and waits for their
completions. Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The talitos driver starts several async crypto ops and waits for their
completions. Move it over to generic code doing the same.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Tested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that -EBUSY return code only indicates backlog queueing
we can safely remove the now redundant check for the
CRYPTO_TFM_REQ_MAY_BACKLOG flag when -EBUSY is returned.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace -EBUSY with -ENOSPC when reporting transient busy
indication in the absence of backlog.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_alg is not supposed to be directly implemented by crypto engine
driver. Drivers should instead implement specialized interfaces like
ahash_alg or skcipher_alg.
Migrate to all cipher algorithms to the skcipher_alg interface. While at
it, get rid of all references to ablkcipher including in internal struct
or function names.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pointer vf_info is being assigned but never read, it is redundant
and therefore can be removed.
Cleans up clang warning: Value stored to 'vf_info' is never read
Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variable qim is assigned but never read, it is redundant and can
be removed.
Cleans up clang warning: Value stored to 'qim' is never read
Fixes: 4b394a232d ("crypto: ccp - Let a v5 CCP provide the same function as v3")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable offset is being assigned and not being used; it should
be passed as the 2nd argument to call to function nitrox_write_csr
but has been omitted. Fix this.
Cleans up clang warning: Value stored to 'offset' is never read
Fixes: 14fa93cdcd ("crypto: cavium - Add support for CNN55XX adapters.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All defconfigs selecting the old driver have been patched to select
the new one instead. We can now remove the old driver along with the
allhwsupports module parameter in the new driver that was used to
check whether the new driver was allowed to take control of the CESA
engine or not.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a platform_device_id table to allow using this driver on orion
platforms that have not been converted to DT.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix memory leak when device does not support crypto.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow chcr to do DMA mapping/Unmapping instead of lld cxgb4.
It moves "Copy AAD to dst buffer" requirement from driver to
firmware.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update DMA address index instead of allocating new sg list to impose 2k size limit for each entry.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch avoids copy of buffered data to hash from bufnext to buf
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SEC1 doesn't support S/G in descriptors so for hash operations,
the CPU has to build a buffer containing the buffered block and
the incoming data. This generates a lot of memory copies which
represents more than 50% of CPU time of a md5sum operation as
shown below with a 'perf record'.
|--86.24%-- kcapi_md_digest
| |
| |--86.18%-- _kcapi_common_vmsplice_chunk_fd
| | |
| | |--83.68%-- splice
| | | |
| | | |--83.59%-- ret_from_syscall
| | | | |
| | | | |--83.52%-- sys_splice
| | | | | |
| | | | | |--83.49%-- splice_from_pipe
| | | | | | |
| | | | | | |--83.04%-- __splice_from_pipe
| | | | | | | |
| | | | | | | |--80.67%-- pipe_to_sendpage
| | | | | | | | |
| | | | | | | | |--78.25%-- hash_sendpage
| | | | | | | | | |
| | | | | | | | | |--60.08%-- ahash_process_req
| | | | | | | | | | |
| | | | | | | | | | |--56.36%-- sg_copy_buffer
| | | | | | | | | | | |
| | | | | | | | | | | |--55.29%-- memcpy
| | | | | | | | | | | |
However, unlike SEC2+, SEC1 offers the possibility to chain
descriptors. It is therefore possible to build a first descriptor
pointing to the buffered data and a second descriptor pointing to
the incoming data, hence avoiding the memory copy to a single
buffer.
With this patch, the time necessary for a md5sum on a 90Mbytes file
is approximately 3 seconds. Without the patch it takes 6 seconds.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
At every request, we map and unmap the same hash hw_context.
This patch moves the dma mapping/unmapping in functions ahash_init()
and ahash_import().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dma_map_single() is an heavy operation which doesn't need to
be done at each request as the key doesn't change.
Instead of DMA mapping the key at every request, this patch maps it
once in setkey()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do (desc->hdr & DESC_HDR_TYPE_IPSEC_ESP) only once.
Limit number of if/else paths
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
to_talitos_ptr() and to_talitos_ptr_len() are always called together
in order to fully set a ptr, so lets merge them into a single
helper.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The number of channels is known from the beginning, no need to
test it everytime.
This patch defines two additional done functions handling only channel 0.
Then the probe registers the correct one based on the number of channels.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use of_property_read_u32() to simplify DT read
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
talitos_handle_buggy_hash() and talitos_sg_map() are only used
locally, make them static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch zeroize the descriptor at allocation using memset().
This has two advantages:
- It reduces the number of places where data has to be set to 0
- It avoids reading memory and loading the cache with data that
will be entirely replaced.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sg_link_tbl_len shall be used instead of cryptlen, otherwise
SECs which perform HW CICV verification will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sha224 AEAD test fails with:
[ 2.803125] talitos ff020000.crypto: DEUISR 0x00000000_00000000
[ 2.808743] talitos ff020000.crypto: MDEUISR 0x80100000_00000000
[ 2.814678] talitos ff020000.crypto: DESCBUF 0x20731f21_00000018
[ 2.820616] talitos ff020000.crypto: DESCBUF 0x0628d64c_00000010
[ 2.826554] talitos ff020000.crypto: DESCBUF 0x0631005c_00000018
[ 2.832492] talitos ff020000.crypto: DESCBUF 0x0628d664_00000008
[ 2.838430] talitos ff020000.crypto: DESCBUF 0x061b13a0_00000080
[ 2.844369] talitos ff020000.crypto: DESCBUF 0x0631006c_00000080
[ 2.850307] talitos ff020000.crypto: DESCBUF 0x0631006c_00000018
[ 2.856245] talitos ff020000.crypto: DESCBUF 0x063100ec_00000000
[ 2.884972] talitos ff020000.crypto: failed to reset channel 0
[ 2.890503] talitos ff020000.crypto: done overflow, internal time out, or rngu error: ISR 0x20000000_00020000
[ 2.900652] alg: aead: encryption failed on test 1 for authenc-hmac-sha224-cbc-3des-talitos: ret=22
This is due to SHA224 not being supported by the HW. Allthough for
hash we are able to init the hash context by SW, it is not
possible for AEAD. Therefore SHA224 AEAD has to be deactivated.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto manager test report the following failures:
[ 3.061081] alg: skcipher: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.069342] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.077754] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
This is due to setkey being expected to detect weak keys.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds aes-gcm support to crypto4xx.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch enhances existing interfaces and
functions to support AEAD ciphers in the next
patches.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thanks to the big overhaul of crypto4xx_build_pd(), the request-local
sa_in, sa_out and state_record allocation can be simplified.
There's no need to setup any dma coherent memory anymore and
much of the support code can be removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the crypto4xx device is continuously loaded by dm-crypt
and ipsec work, it will start to work intermittent after a
few (between 20-30) seconds, hurting throughput and latency.
This patch contains various stability improvements in order
to fix this issue. So far, the hardware has survived more
than a day without suffering any stalls under the continuous
load.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_core.c:179:6: warning: symbol 'crypto4xx_free_state_record'
was not declared. Should it be static?
crypto4xx_core.c:331:5: warning: symbol 'crypto4xx_get_n_gd'
was not declared. Should it be static?
crypto4xx_core.c:652:6: warning: symbol 'crypto4xx_return_pd'
was not declared. Should it be static?
crypto4xx_return_pd() is not used by anything. Therefore it is removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch overhauls and fixes code related to crypto4xx_build_pd()
* crypto4xx_build_pd() did not handle chained source scatterlist.
This is fixed by replacing the buggy indexed-access of &src[idx]
with sg_next() in the gather array setup loop.
* The redundant is_hash, direction, save_iv and pd_ctl members
in the crypto4xx_ctx struct have been removed.
- is_hash can be derived from the crypto_async_request parameter.
- direction is already part of the security association's
bf.dir bitfield.
- save_iv is unused.
- pd_ctl always had the host_ready bit enabled anyway.
(the hash_final case is rather pointless, since the ahash
code has been deactivated).
* make crypto4xx_build_pd()'s caller responsible for converting
the IV to the LE32 format.
* change crypto4xx_ahash_update() and crypto4xx_ahash_digest() to
initialize a temporary destination scatterlist. This allows the
removal of an ugly cast of req->result (which is a pointer to an
u8-array) to a scatterlist pointer.
* change crypto4xx_build_pd() return type to int. After all
it returns -EINPROGRESS/-EBUSY.
* fix crypto4xx_build_pd() thread-unsafe sa handling.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware expects that the keys, IVs (and inner/outer hashes)
are in the le32 format.
This patch changes all hardware interface declarations to use
the correct LE32 data format for each field.
In order to pass __CHECK_ENDIAN__ checks, crypto4xx_memcpy_le
has to be honest about the endianness of its parameters.
The function was split and moved to the common crypto4xx_core.h
header. This allows the compiler to generate better code if the
sizes/len is a constant (various *_IV_LEN).
Please note that the hardware isn't consistent with the endiannes
of the save_digest field in the state record struct though.
The hashes produced by GHASH and CBC (for CCM) will be in LE32.
Whereas md5 and sha{1/,256,...} do not need any conversion.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previously, If the crypto4xx driver used all available
security contexts, it would simply refuse new requests
with -EAGAIN. CRYPTO_TFM_REQ_MAY_BACKLOG was ignored.
in case of dm-crypt.c's crypt_convert() function this was
causing the following errors to manifest, if the system was
pushed hard enough:
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| JBD2: Detected IO errors while flushing file data on dm-1-8
| Aborting journal on device dm-1-8.
| EXT4-fs error : ext4_journal_check_start:56: Detected aborted journal
| EXT4-fs (dm-1): Remounting filesystem read-only
| EXT4-fs : ext4_writepages: jbd2_start: 2048 pages, inode 498...; err -30
(This did cause corruptions due to failed writes)
To fix this mess, the crypto4xx driver needs to notifiy the
user to slow down. This can be achieved by returning -EBUSY
on requests, once the crypto hardware was falling behind.
Note: -EBUSY has two different meanings. Setting the flag
CRYPTO_TFM_REQ_MAY_BACKLOG implies that the request was
successfully queued, by the crypto driver. To achieve this
requirement, the implementation introduces a threshold check and
adds logic to the completion routines in much the same way as
AMD's Cryptographic Coprocessor (CCP) driver do.
Note2: Tests showed that dm-crypt starved ipsec traffic.
Under load, ipsec links dropped to 0 Kbits/s. This is because
dm-crypt's callback would instantly queue the next request.
In order to not starve ipsec, the driver reserves a small
portion of the available crypto contexts for this purpose.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.
On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)
/dev/mapper/swap_crypt:
Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec
The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:
/dev/mapper/swap_crypt:
Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec
Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes a type mismatch error that I accidentally
introduced when I moved and refactored the dynamic_contents
helpers.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I used aes-cbc as a template for ofb. But sadly I forgot
to update set_key method to crypto4xx_setkey_aes_ofb().
this was caught by the testmgr:
alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx
00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d
00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2
00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16
00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7
With the correct set_key method, the aes-ofb cipher passes the test.
name : ofb(aes)
driver : ofb-aes-ppc4xx
module : crypto4xx
priority : 300
refcnt : 1
selftest : passed
internal : no
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hmac_mc parameter of set_dynamic_sa_command_1()
was defined but not used. On closer inspection it
turns out, it was never wired up.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the provided mechanism in dmaengine.h to invoke the
completion callback.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clean up the mapped pages and the unmap object once we are done with
it. This enables the final clean-up of the object once the transfer
is complete.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
gcc warns that the length for the extra unaligned data in the hash
function may be used unaligned. In theory this could happen if
we pass a zero-length sg_list, or if sg_is_last() was never true:
In file included from drivers/crypto/stm32/stm32-hash.c:23:
drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request':
include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
Neither of these can happen in practice, so the warning is harmless.
However while trying to suppress the warning, I noticed multiple
problems with that code:
- On big-endian kernels, we byte-swap the data like we do for
register accesses, however this is a data stream and almost
certainly needs to use a single writesl() instead of series
of writel() to give the correct hash.
- If the length is not a multiple of four bytes, we skip the
last word entirely, since we write the truncated length
using stm32_hash_set_nblw().
- If we change the code to round the length up rather than
down, the last bytes contain stale data, so it needs some
form of padding.
This tries to address all four problems, by correctly
initializing the length to zero, using endian-safe copy
functions, adding zero-padding and passing the padded length.
I have done no testing on this patch, so please review
carefully and if possible test with an unaligned length
and big-endian kernel builds.
Fixes: 8a1012d3f2 ("crypto: stm32 - Support for STM32 HASH module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to explicity ACK mailbox message
because after sending message we can know
the send status via error attribute of brcm_message.
This is needed to support "txdone_ack" supported in
mailbox controller driver.
Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use PTR_ERROR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Build successfully.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kfree on NULL pointer is a no-op and therefore checking it is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE
and x86_match_cpu are working with const x86_cpu_id. So mark the
non-const x86_cpu_id structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
x86_cpu_id are not supposed to change at runtime. MODULE_DEVICE_TABLE
and x86_match_cpu are working with const x86_cpu_id. So mark the
non-const x86_cpu_id structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch improves the readability of various functions,
by replacing various void* pointers declarations with
their respective structs *. This makes it possible to go
for the eye-friendly array-indexing methods.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If one of the later memory allocations in rypto4xx_build_pdr()
fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed.
crypto4xx_build_sdr() has the same issue with dev->sdr.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
scatter_buffer_size is always set to PPC4XX_SD_BUFFER_SIZE.
I don't think there's any point in keeping the variable
around.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch refactors the crypto4xx_copy_pkt_to_dst() to use
scatterwalk_map_and_copy() to copy the processed data between
the crypto engine's scatter ring buffer and the destination
specified by the ablkcipher_request.
This also makes the crypto4xx_fill_one_page() function redundant.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto engine supports more than just aes-cbc. This patch
enables the remaining AES block cipher modes that pass the
testmanager's test vectors.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch refactors and moves the dynamic_contents helper
functions into the crypto4xx_sa.h header file.
* get_dynamic_sa_iv_size is no longer needed, as the cryptoapi
provides the required IV size information as well.
* refactor the function declarations to use the a pointer to the
dynamic_sa_contents union, instead of the crypto4xx_ctx.
* rename get_dynamic_sa_offset_key_field to get_dynamic_sa_key_field.
It returns the pointer to the key directly.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The driver had a union dynamic_sa_contents in place that
described the meaning of the bits in the sa_contents
variable.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_put_pd_to_pdr() already clears the flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All function declarations are "extern" by default, there is no need to
specify it explicitly.
For C99 states in 6.2.2.5:
"If the declaration of an identifier for a function has no
storage-class specifier, its linkage is determined exactly
as if it were declared with the storage-class specifier
extern."
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The security offload function is performed by a cryptographic
engine core attached to the 128-bit PLB (processor local bus)
with builtin DMA and interrupt controllers. This, I think,
satisfies the requirement for the CRYPTO_ALG_KERN_DRIVER_ONLY
flag.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes several unused code and definitons
(structs, variables, ...).
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
alg entries are only added to the list, after the registration
was successful. If the registration failed, it was never added
to the list in the first place.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch replace GCM IV size value by their constant name.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, empty messages are not supported in GCM mode, hence add
a check to prevent producing incorrect results.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove err symbol as this is not used in the thread context
and the variable is not initialized.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without CONFIG_DEBUG_FS, we get a harmless warning:
drivers/crypto/axis/artpec6_crypto.c:352:23: error: 'dbgfs_root' defined but not used [-Werror=unused-variable]
This moves it into the #ifdef that hides the only user.
Fixes: a21eb94fc4 ("crypto: axis - add ARTPEC-6/7 crypto accelerator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Lars Persson <larper@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When built using multi_v7_defconfig, driver does not work on LS1021A:
[...]
caam 1700000.crypto: can't identify CAAM ipg clk: -2
caam: probe of 1700000.crypto failed with error -2
[...]
It turns out we have to detect at runtime whether driver is running
on an i.MX platform or not.
Cc: <stable@vger.kernel.org>
Fixes: 6c3af95593 ("crypto: caam - add support for LS1021A")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All older compiler versions up to gcc-4.9 produce these
harmless warnings:
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_cipher.c:389:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: missing braces around initializer [-Wmissing-braces]
drivers/crypto/inside-secure/safexcel_hash.c:422:9: warning: (near initialization for ‘result.completion’) [-Wmissing-braces]
This changes the syntax to something that works on all versions
without warnings.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Today, md5sum fails with error -ENOKEY because a setkey
function is set for non hmac hashing algs, see strace output below:
mmap(NULL, 378880, PROT_READ, MAP_SHARED, 6, 0) = 0x77f50000
accept(3, 0, NULL) = 7
vmsplice(5, [{"bin/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 378880}], 1, SPLICE_F_MORE|SPLICE_F_GIFT) = 262144
splice(4, NULL, 7, NULL, 262144, SPLICE_F_MORE) = -1 ENOKEY (Required key not available)
write(2, "Generation of hash for file kcap"..., 50) = 50
munmap(0x77f50000, 378880) = 0
This patch ensures that setkey() function is set only
for hmac hashing.
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
md5sum on some files gives wrong result
Exemple:
With the md5sum from libkcapi:
c15115c05bad51113f81bdaee735dd09 test
With the original md5sum:
bbdf41d80ba7e8b2b7be3a0772be76cb test
This patch fixes this issue
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Removal of DMA_SG support as we have no users for this feature
- New driver for Altera / Intel mSGDMA IP core
- Support for memset in dmatest and qcom_hidma driver
- Update for non cyclic mode in k3dma, bunch of update in bam_dma, bcm sba-raid
- Constify device ids across drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=88SI
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This one features the usual updates to the drivers and one good part
of removing DA_SG from core as it has no users.
Summary:
- Remove DMA_SG support as we have no users for this feature
- New driver for Altera / Intel mSGDMA IP core
- Support for memset in dmatest and qcom_hidma driver
- Update for non cyclic mode in k3dma, bunch of update in bam_dma,
bcm sba-raid
- Constify device ids across drivers"
* tag 'dmaengine-4.14-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (52 commits)
dmaengine: sun6i: support V3s SoC variant
dmaengine: sun6i: make gate bit in sun8i's DMA engines a common quirk
dmaengine: rcar-dmac: document R8A77970 bindings
dmaengine: xilinx_dma: Fix error code format specifier
dmaengine: altera: Use macros instead of structs to describe the registers
dmaengine: ti-dma-crossbar: Fix dra7 reserve function
dmaengine: pl330: constify amba_id
dmaengine: pl08x: constify amba_id
dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_COMPLETED
dmaengine: bcm-sba-raid: Explicitly ACK mailbox message after sending
dmaengine: bcm-sba-raid: Add debugfs support
dmaengine: bcm-sba-raid: Remove redundant SBA_REQUEST_STATE_RECEIVED
dmaengine: bcm-sba-raid: Re-factor sba_process_deferred_requests()
dmaengine: bcm-sba-raid: Pre-ack async tx descriptor
dmaengine: bcm-sba-raid: Peek mbox when we have no free requests
dmaengine: bcm-sba-raid: Alloc resources before registering DMA device
dmaengine: bcm-sba-raid: Improve sba_issue_pending() run duration
dmaengine: bcm-sba-raid: Increase number of free sba_request
dmaengine: bcm-sba-raid: Allow arbitrary number free sba_request
dmaengine: bcm-sba-raid: Remove reqs_free_count from sba_device
...
Nothing really major this release, despite quite a lot of activity. Just lots of
things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can count both
core events as well as nest unit events (Memory controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid unnecessary Page
Walk Cache (PWC) flushes when the structure of the tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it closer to
other architectures where possible.
- Rework of our page table walking so that THP updates only need to send IPIs
to CPUs where the affected mm has run, rather than all CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU systems.
This avoids problems with the percpu allocator on systems with very sparse
NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that pairs of
cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing coprocessors,
and initial support for using it with the NX compression accelerator.
- Major work on the instruction emulation support, adding support for many new
instructions, and reworking it so it can be used to implement the emulation
needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt controller.
And probably that many things again that are almost as interesting, but I had to
keep the list short. Plus the usual fixes and cleanups as always.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Aneesh Kumar K.V, Anju
T Sudhakar, Arvind Yadav, Balbir Singh, Benjamin Herrenschmidt, Bhumika Goyal,
Breno Leitao, Bryant G. Ly, Christophe Leroy, Cédric Le Goater, Dan Carpenter,
Dou Liyang, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand,
Hannes Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall, LABBE
Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring, Masahiro
Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo, Nathan Fontenot,
Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Rashmica
Gupta, Rob Herring, Rui Teng, Sam Bobroff, Santosh Sivaraj, Scott Wood,
Shilpasri G Bhat, Sukadev Bhattiprolu, Suraj Jitindar Singh, Tobin C. Harding,
Victor Aoqui.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UJtt
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Nothing really major this release, despite quite a lot of activity.
Just lots of things all over the place.
Some things of note include:
- Access via perf to a new type of PMU (IMC) on Power9, which can
count both core events as well as nest unit events (Memory
controller etc).
- Optimisations to the radix MMU TLB flushing, mostly to avoid
unnecessary Page Walk Cache (PWC) flushes when the structure of the
tree is not changing.
- Reworks/cleanups of do_page_fault() to modernise it and bring it
closer to other architectures where possible.
- Rework of our page table walking so that THP updates only need to
send IPIs to CPUs where the affected mm has run, rather than all
CPUs.
- The size of our vmalloc area is increased to 56T on 64-bit hash MMU
systems. This avoids problems with the percpu allocator on systems
with very sparse NUMA layouts.
- STRICT_KERNEL_RWX support on PPC32.
- A new sched domain topology for Power9, to capture the fact that
pairs of cores may share an L2 cache.
- Power9 support for VAS, which is a new mechanism for accessing
coprocessors, and initial support for using it with the NX
compression accelerator.
- Major work on the instruction emulation support, adding support for
many new instructions, and reworking it so it can be used to
implement the emulation needed to fixup alignment faults.
- Support for guests under PowerVM to use the Power9 XIVE interrupt
controller.
And probably that many things again that are almost as interesting,
but I had to keep the list short. Plus the usual fixes and cleanups as
always.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andreas Schwab,
Aneesh Kumar K.V, Anju T Sudhakar, Arvind Yadav, Balbir Singh,
Benjamin Herrenschmidt, Bhumika Goyal, Breno Leitao, Bryant G. Ly,
Christophe Leroy, Cédric Le Goater, Dan Carpenter, Dou Liyang,
Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Hannes
Reinecke, Haren Myneni, Ivan Mikhaylov, John Allen, Julia Lawall,
LABBE Corentin, Laurentiu Tudor, Madhavan Srinivasan, Markus Elfring,
Masahiro Yamada, Matt Brown, Michael Neuling, Murilo Opsfelder Araujo,
Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
Paul Mackerras, Rashmica Gupta, Rob Herring, Rui Teng, Sam Bobroff,
Santosh Sivaraj, Scott Wood, Shilpasri G Bhat, Sukadev Bhattiprolu,
Suraj Jitindar Singh, Tobin C. Harding, Victor Aoqui"
* tag 'powerpc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (321 commits)
powerpc/xive: Fix section __init warning
powerpc: Fix kernel crash in emulation of vector loads and stores
powerpc/xive: improve debugging macros
powerpc/xive: add XIVE Exploitation Mode to CAS
powerpc/xive: introduce H_INT_ESB hcall
powerpc/xive: add the HW IRQ number under xive_irq_data
powerpc/xive: introduce xive_esb_write()
powerpc/xive: rename xive_poke_esb() in xive_esb_read()
powerpc/xive: guest exploitation of the XIVE interrupt controller
powerpc/xive: introduce a common routine xive_queue_page_alloc()
powerpc/sstep: Avoid used uninitialized error
axonram: Return directly after a failed kzalloc() in axon_ram_probe()
axonram: Improve a size determination in axon_ram_probe()
axonram: Delete an error message for a failed memory allocation in axon_ram_probe()
powerpc/powernv/npu: Move tlb flush before launching ATSD
powerpc/macintosh: constify wf_sensor_ops structures
powerpc/iommu: Use permission-specific DEVICE_ATTR variants
powerpc/eeh: Delete an error out of memory message at init time
powerpc/mm: Use seq_putc() in two functions
macintosh: Convert to using %pOF instead of full_name
...
This patch adds P9 NX support for 842 compression engine. Virtual
Accelerator Switchboard (VAS) is used to access 842 engine on P9.
For each NX engine per chip, setup receive window using
vas_rx_win_open() which configures RxFIFo with FIFO address, lpid,
pid and tid values. This unique (lpid, pid, tid) combination will
be used to identify the target engine.
For crypto open request, open send window on the NX engine for
the corresponding chip / cpu where the open request is executed.
This send window will be closed upon crypto close request.
NX provides high and normal priority FIFOs. For compression /
decompression requests, we use only hight priority FIFOs in kernel.
Each NX request will be communicated to VAS using copy/paste
instructions with vas_copy_crb() / vas_paste_crb() functions.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds changes for checking P9 specific 842 engine
error codes. These errros are reported in coprocessor status
block (CSB) for failures.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Send window is opened / closed for each crypto session.
So initializes txwin in workmem.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Updating coprocessor list is moved to nx842_add_coprocs_list().
This function will be used for both icswx and VAS functions.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move deleting coprocessors info upon exit or failure to
nx842_delete_coprocs().
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Configure CRB is moved to nx842_configure_crb() so that it can
be used for icswx and VAS exec functions. VAS function will be
added later with P9 support.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rename nx842_powernv_function to nx842_powernv_exec.
nx842_powernv_exec points to nx842_exec_icswx and
will be point to VAS exec function which will be added later
for P9 NX support.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the GET_FIELD and SET_FIELD macros to vas.h as VAS and other
users of VAS, including NX-842 can use those macros.
There is a lot of related code between the VAS/NX kernel drivers
and skiboot. For consistency, switch the order of parameters in
SET_FIELD to match the order in skiboot.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christian Lamparter