Doesn't do anything right now, but it's needed as a prep patch
to get the interfaces right.
While in there, correct the blk_mq_map_queue() CPU type to an unsigned
int.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for allowing multiple sets of maps per
queue, if so desired.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's just a pointer to set->mq_map, use that instead. Move the
assignment a bit earlier, so we always know it's valid.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This was used for completion placement for the legacy path,
but for mq we have rq->mq_ctx->cpu for that. Add a helper
to get the request CPU assignment, as the mq_ctx type is
private to blk-mq.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the legacy path gone, all we do is funnel it through the
mq_ops->complete() operation.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No point in hiding what this does, just open code it in the
one spot where we are still using it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is dead code, any queue reaching this part has mq_ops
attached.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It'll always be false at this point, just remove it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now dead code, nobody uses it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of the special bsg job fn and timeout handler, move them
into a private bsg_set instead.
Mostly from Christoph, with fixes for error handling and cleanups.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only user of legacy timing now is BSG, which is invoked
from the mq timeout handler. Kill the legacy code, and rename
the q->rq_timed_out_fn to q->bsg_job_timeout_fn.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now there's no difference between blk_put_request() and
__blk_put_request() anymore, get rid of the underscore version and
convert the few callers.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a remnant of when we had ops for both SQ and MQ
schedulers. Now it's just MQ, so get rid of the union.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.
Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.
Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Retain the deadline documentation, as that carries over to mq-deadline
as well.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that blk_flush_queue_rq() always returns false, we can
remove that return value. That bubbles through the stack,
allowing us to remove a bunch of state tracking around it.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now unused, kill it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only support mq devices now.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is blk-mq at this point, so it doesn't make any sense
to have this option available as it does nothing.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now unused.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Requires a few changes to the FC transport class as well.
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All drivers do unregister + cleanup, provide a helper for that.
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will ease in the conversion to blk-mq, where we can't set
a timeout handler after queue init.
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody is using the legacy path for blk_lld_busy() anymore, remove
it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We'll hook into this from blk_lld_busy(), allowing blk-mq to also
return whether or not a given queue currently has requests in
progress.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't do anything with it, that's just the legacy path.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With drivers that are settting a virtual boundary constrain, we are
seeing a lot of bio splitting and smaller I/Os being submitted to the
driver.
This happens because the bio gap detection code does not account cases
where PAGE_SIZE - 1 is bigger than queue_virt_boundary() and thus will
split the bio unnecessarily.
Cc: Jan Kara <jack@suse.cz>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rq_qos_exit() removes the current q->rq_qos, this action has to be
done after queue is frozen, otherwise the IO queue path may never
be waken up, then IO hang is caused.
So fixes this issue by moving rq_qos_exit() after queue is frozen.
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two cases when handle DISCARD merge.
If max_discard_segments == 1, the bios/requests need to be contiguous
to merge. If max_discard_segments > 1, it takes every bio as a range
and different range needn't to be contiguous.
But now, attempt_merge screws this up. It always consider contiguity
for DISCARD for the case max_discard_segments > 1 and cannot merge
contiguous DISCARD for the case max_discard_segments == 1, because
rq_attempt_discard_merge always returns false in this case.
This patch fixes both of the two cases above.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
There are several definitions of those functions/macros in places that
mess with fixed-point load averages. Provide an official version.
[akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c]
Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 2d29c9f89f ("block, bfq: improve asymmetric scenarios
detection"), a scenario is defined asymmetric when one of the
following conditions holds:
- active bfq_queues have different weights
- one or more group of entities (bfq_queue or other groups of entities)
are active
bfq grants fairness and low latency also in such asymmetric scenarios,
by plugging the dispatching of I/O if the bfq_queue in service happens
to be temporarily idle. This plugging may lower throughput, so it is
important to do it only when strictly needed.
By mistake, in commit '2d29c9f89fcd' ("block, bfq: improve asymmetric
scenarios detection") the num_active_groups counter was firstly
incremented and subsequently decremented at any entity (group or
bfq_queue) weight change.
This is useless, because only transitions from active to inactive and
vice versa matter for that counter. Unfortunately this is also
incorrect in the following case: the entity at issue is a bfq_queue
and it is under weight raising. In fact in this case there is a
spurious increment of the num_active_groups counter.
This spurious increment may cause scenarios to be wrongly detected as
asymmetric, thus causing useless plugging and loss of throughput.
This commit fixes this issue by simply removing the above useless and
wrong increments and decrements.
Fixes: 2d29c9f89f ("block, bfq: improve asymmetric scenarios detection")
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Federico Motta <federico@willer.it>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
trace_block_getrq() is to indicate a request struct has been allocated
for queue, so put it in right place.
Reviewed-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers exposing zoned block devices have to initialize and maintain
correctness (i.e. revalidate) of the device zone bitmaps attached to
the device request queue (seq_zones_bitmap and seq_zones_wlock).
To simplify coding this, introduce a generic helper function
blk_revalidate_disk_zones() suitable for most (and likely all) cases.
This new function always update the seq_zones_bitmap and seq_zones_wlock
bitmaps as well as the queue nr_zones field when called for a disk
using a request based queue. For a disk using a BIO based queue, only
the number of zones is updated since these queues do not have
schedulers and so do not need the zone bitmaps.
With this change, the zone bitmap initialization code in sd_zbc.c can be
replaced with a call to this function in sd_zbc_read_zones(), which is
called from the disk revalidate block operation method.
A call to blk_revalidate_disk_zones() is also added to the null_blk
driver for devices created with the zoned mode enabled.
Finally, to ensure that zoned devices created with dm-linear or
dm-flakey expose the correct number of zones through sysfs, a call to
blk_revalidate_disk_zones() is added to dm_table_set_restrictions().
The zone bitmaps allocated and initialized with
blk_revalidate_disk_zones() are freed automatically from
__blk_release_queue() using the block internal function
blk_queue_free_zone_bitmaps().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.
sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.
For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose through sysfs the nr_zones field of struct request_queue.
Exposing this value helps in debugging disk issues as well as
facilitating scripts based use of the disk (e.g. blktests).
For zoned block devices, the nr_zones field indicates the total number
of zones of the device calculated using the known disk capacity and
zone size. This number of zones is always 0 for regular block devices.
Since nr_zones is defined conditionally with CONFIG_BLK_DEV_ZONED,
introduce the blk_queue_nr_zones() function to return the correct value
for any device, regardless if CONFIG_BLK_DEV_ZONED is set.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to synchronously execute all REQ_OP_ZONE_RESET BIOs
necessary to reset a range of zones. Similarly to what is done for
discard BIOs in blk-lib.c, all zone reset BIOs can be chained and
executed asynchronously and a synchronous call done only for the last
BIO of the chain.
Modify blkdev_reset_zones() to operate similarly to
blkdev_issue_discard() using the next_bio() helper for chaining BIOs. To
avoid code duplication of that function in blk_zoned.c, rename
next_bio() into blk_next_bio() and declare it as a block internal
function in blk.h.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get a zoned block device total number of zones. The device can be a
partition of the whole device. The number of zones is always 0 for
regular block devices.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get a zoned block device zone size in number of 512 B sectors.
The zone size is always 0 for regular block devices.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no point in allocating more zone descriptors than the number of
zones a block device has for doing a zone report. Avoid doing that in
blkdev_report_zones_ioctl() by limiting the number of zone decriptors
allocated internally to process the user request.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce the blkdev_nr_zones() helper function to get the total
number of zones of a zoned block device. This number is always 0 for a
regular block device (q->limits.zoned == BLK_ZONED_NONE case).
Replace hard-coded number of zones calculation in dmz_get_zoned_device()
with a call to this helper.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use accessor functions to access an iterator's type and direction. This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LRTT
-----END PGP SIGNATURE-----
Merge tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"This is the main pull request for block changes for 4.20. This
contains:
- Series enabling runtime PM for blk-mq (Bart).
- Two pull requests from Christoph for NVMe, with items such as;
- Better AEN tracking
- Multipath improvements
- RDMA fixes
- Rework of FC for target removal
- Fixes for issues identified by static checkers
- Fabric cleanups, as prep for TCP transport
- Various cleanups and bug fixes
- Block merging cleanups (Christoph)
- Conversion of drivers to generic DMA mapping API (Christoph)
- Series fixing ref count issues with blkcg (Dennis)
- Series improving BFQ heuristics (Paolo, et al)
- Series improving heuristics for the Kyber IO scheduler (Omar)
- Removal of dangerous bio_rewind_iter() API (Ming)
- Apply single queue IPI redirection logic to blk-mq (Ming)
- Set of fixes and improvements for bcache (Coly et al)
- Series closing a hotplug race with sysfs group attributes (Hannes)
- Set of patches for lightnvm:
- pblk trace support (Hans)
- SPDX license header update (Javier)
- Tons of refactoring patches to cleanly abstract the 1.2 and 2.0
specs behind a common core interface. (Javier, Matias)
- Enable pblk to use a common interface to retrieve chunk metadata
(Matias)
- Bug fixes (Various)
- Set of fixes and updates to the blk IO latency target (Josef)
- blk-mq queue number updates fixes (Jianchao)
- Convert a bunch of drivers from the old legacy IO interface to
blk-mq. This will conclude with the removal of the legacy IO
interface itself in 4.21, with the rest of the drivers (me, Omar)
- Removal of the DAC960 driver. The SCSI tree will introduce two
replacement drivers for this (Hannes)"
* tag 'for-4.20/block-20181021' of git://git.kernel.dk/linux-block: (204 commits)
block: setup bounce bio_sets properly
blkcg: reassociate bios when make_request() is called recursively
blkcg: fix edge case for blk_get_rl() under memory pressure
nvme-fabrics: move controller options matching to fabrics
nvme-rdma: always have a valid trsvcid
mtip32xx: fully switch to the generic DMA API
rsxx: switch to the generic DMA API
umem: switch to the generic DMA API
sx8: switch to the generic DMA API
sx8: remove dead IF_64BIT_DMA_IS_POSSIBLE code
skd: switch to the generic DMA API
ubd: remove use of blk_rq_map_sg
nvme-pci: remove duplicate check
drivers/block: Remove DAC960 driver
nvme-pci: fix hot removal during error handling
nvmet-fcloop: suppress a compiler warning
nvme-core: make implicit seed truncation explicit
nvmet-fc: fix kernel-doc headers
nvme-fc: rework the request initialization code
nvme-fc: introduce struct nvme_fcp_op_w_sgl
...
We're only setting up the bounce bio sets if we happen
to need bouncing for regular HIGHMEM, not if we only need
it for ISA devices.
Protect the ISA bounce setup with a mutex, since it's
being invoked from driver init functions and can thus be
called in parallel.
Cc: stable@vger.kernel.org
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When submitting a bio, multiple recursive calls to make_request() may
occur. This causes the initial associate done in blkcg_bio_issue_check()
to be incorrect and reference the prior request_queue. This introduces
a helper to do reassociation when make_request() is recursively called.
Fixes: a7b39b4e96 ("blkcg: always associate a bio with a blkg")
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).
More importantly, this patch fixes one issue introduced in a22c4d7e34
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.
Fixes: a22c4d7e34 ("block: re-add discard_granularity and alignment checks")
Cc: stable@vger.kernel.org
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This pattern is repeated throughout all the blk-mq conversions.
Provide a basic helper to get it done.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We just allocated the queue and haven't even set it up yet,
hence we know that checking if ->mq_ops is NULL is always
going to be true.
In fact we do need to assign a lock to ->queue_lock always,
as we need it for the queue flags modifications.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we try to increate the nr_hw_queues, we may fail due to
shortage of memory or other reason, then blk_mq_realloc_hw_ctxs stops
and some entries in q->queue_hw_ctx are left with NULL. However,
because queue map has been updated with new nr_hw_queues, some cpus
have been mapped to hw queue which just encounters allocation failure,
thus blk_mq_map_queue could return NULL. This will cause panic in
following blk_mq_map_swqueue.
To fix it, when increase nr_hw_queues fails, fallback to previous
nr_hw_queues and post warning. At the same time, driver's .map_queues
usually use completion irq affinity to map hw and cpu, fallback
nr_hw_queues will cause lack of some cpu's map to hw, so use default
blk_mq_map_queues to do that.
Reported-by: syzbot+83e8cbe702263932d9d4@syzkaller.appspotmail.com
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the hw queues and mq_map are updated, a hctx could be mapped
to a different numa node. At this moment, we need to realloc the
hctx. If fail to do that, go on using previous hctx.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_realloc_hw_ctxs could be invoked during update hw queues.
At the momemt, IO is blocked. Change the gfp flags from GFP_KERNEL
to GFP_NOIO to avoid forever hang during memory allocation in
blk_mq_realloc_hw_ctxs.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-mq debugfs and sysfs entries need to be removed before updating
queue map, otherwise, we get get wrong result there. This patch fixes
it and remove the redundant debugfs and sysfs register/unregister
operations during __blk_mq_update_nr_hw_queues.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq defines as asymmetric a scenario where an active entity, say E
(representing either a single bfq_queue or a group of other entities),
has a higher weight than some other entities. If the entity E does sync
I/O in such a scenario, then bfq plugs the dispatch of the I/O of the
other entities in the following situation: E is in service but
temporarily has no pending I/O request. In fact, without this plugging,
all the times that E stops being temporarily idle, it may find the
internal queues of the storage device already filled with an
out-of-control number of extra requests, from other entities. So E may
have to wait for the service of these extra requests, before finally
having its own requests served. This may easily break service
guarantees, with E getting less than its fair share of the device
throughput. Usually, the end result is that E gets the same fraction of
the throughput as the other entities, instead of getting more, according
to its higher weight.
Yet there are two other more subtle cases where E, even if its weight is
actually equal to or even lower than the weight of any other active
entities, may get less than its fair share of the throughput in case the
above I/O plugging is not performed:
1. other entities issue larger requests than E;
2. other entities contain more active child entities than E (or in
general tend to have more backlog than E).
In the first case, other entities may get more service than E because
they get larger requests, than those of E, served during the temporary
idle periods of E. In the second case, other entities get more service
because, by having many child entities, they have many requests ready
for dispatching while E is temporarily idle.
This commit addresses this issue by extending the definition of
asymmetric scenario: a scenario is asymmetric when
- active entities representing bfq_queues have differentiated weights,
as in the original definition
or (inclusive)
- one or more entities representing groups of entities are active.
This broader definition makes sure that I/O plugging will be performed
in all the above cases, provided that there is at least one active
group. Of course, this definition is very coarse, so it will trigger
I/O plugging also in cases where it is not needed, such as, e.g.,
multiple active entities with just one child each, and all with the same
I/O-request size. The reason for this coarse definition is just that a
finer-grained definition would be rather heavy to compute.
On the opposite end, even this new definition does not trigger I/O
plugging in all cases where there is no active group, and all bfq_queues
have the same weight. So, in these cases some unfairness may occur if
there are asymmetries in I/O-request sizes. We made this choice because
I/O plugging may lower throughput, and probably a user that has not
created any group cares more about throughput than about perfect
fairness. At any rate, as for possible applications that may care about
service guarantees, bfq already guarantees a high responsiveness and a
low latency to soft real-time applications automatically.
Signed-off-by: Federico Motta <federico@willer.it>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tetsuo brought to my attention that I screwed up the scale_up/scale_down
helpers when I factored out the rq-qos code. We need to wake up all the
waiters when we add slots for requests to make, not when we shrink the
slots. Otherwise we'll end up things waiting forever. This was a
mistake and simply puts everything back the way it was.
cc: stable@vger.kernel.org
Fixes: a79050434b ("blk-rq-qos: refactor out common elements of blk-wbt")
eported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ is already doing a similar thing in its .pd_offline_fn() method
implementation.
While it seems that after commit 4c6994806f
("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()")
was reverted leaving these pointers intact no longer causes crashes
clearing them is still a sensible thing to do to make the code more robust.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lot of controllers may have only one irq vector for completing IO
request. And usually affinity of the only irq vector is all possible
CPUs, however, on most of ARCH, there may be only one specific CPU
for handling this interrupt.
So if all IOs are completed in hardirq context, it is inevitable to
degrade IO performance because of increased irq latency.
This patch tries to address this issue by allowing to complete request
in softirq context, like the legacy IO path.
IOPS is observed as ~13%+ in the following randread test on raid0 over
virtio-scsi.
mdadm --create --verbose /dev/md0 --level=0 --chunk=1024 --raid-devices=8 /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sdg /dev/sdh /dev/sdi
fio --time_based --name=benchmark --runtime=30 --filename=/dev/md0 --nrfiles=1 --ioengine=libaio --iodepth=32 --direct=1 --invalidate=1 --verify=0 --verify_fatal=0 --numjobs=32 --rw=randread --blocksize=4k
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Zach Marano <zmarano@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When debugging e.g. the SCSI timeout handler it is important that
requests that have not yet been started or that already have
completed are also reported through debugfs.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAluw4MIACgkQONu9yGCS
aT7+8xAAiYnc4khUsxeInm3z44WPfRX1+UF51frTNSY5C8Nn5nvRSnTUNLuKkkrz
8RbwCL6UYyJxF9I/oZdHPsPOD4IxXkQY55tBjz7ZbSBIFEwYM6RJMm8mAGlXY7wq
VyWA5MhlpGHM9DjrguB4DMRipnrSc06CVAnC+ZyKLjzblzU1Wdf2dYu+AW9pUVXP
j4r74lFED5djPY1xfqfzEwmYRCeEGYGx7zMqT3GrrF5uFPqj1H6O5klEsAhIZvdl
IWnJTU2coC8R/Sd17g4lHWPIeQNnMUGIUbu+PhIrZ/lDwFxlocg4BvarPXEdzgYi
gdZzKBfovpEsSu5RCQsKWG4IGQxY7I1p70IOP9eqEFHZy77qT1YcHVAWrK1Y/bJd
UA08gUOSzRnhKkNR3+PsaMflUOl9WkpyHECZu394cyRGMutSS50aWkavJPJ/o1Qi
D/oGqZLLcKFyuNcchG+Met1TzY3LvYEDgSburqwqeUZWtAsGs8kmiiq7qvmXx4zV
IcgM8ERqJ8mbfhfsXQU7hwydIrPJ3JdIq19RnM5ajbv2Q4C/qJCyAKkQoacrlKR4
aiow/qvyNrP80rpXfPJB8/8PiWeDtAnnGhM+xySZNlw3t8GR6NYpUkIzf5TdkSb3
C8KuKg6FY9QAS62fv+5KK3LB/wbQanxaPNruQFGe5K1iDQ5Fvzw=
=dMl4
-----END PGP SIGNATURE-----
Merge tag 'v4.19-rc6' into for-4.20/block
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We apply a smoothing to the scale changes in order to keep sawtoothy
behavior from occurring. However our window for checking if we've
missed our target can sometimes be lower than the smoothing interval
(500ms), especially on faster drives like ssd's. In order to deal with
this keep track of the running tally of the previous intervals that we
threw away because we had already done a scale event recently.
This is needed for the ssd case as these low latency drives will have
bursts of latency, and if it happens to be ok for the window that
directly follows the opening of the scale window we could unthrottle
when previous windows we were missing our target.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use an average latency approach for determining if we're missing our
latency target. This works well for rotational storage where we have
generally consistent latencies, but for ssd's and other low latency
devices you have more of a spikey behavior, which means we often won't
throttle misbehaving groups because a lot of IO completes at drastically
faster times than our latency target. Instead keep track of how many
IO's miss our target and how many IO's are done in our time window. If
the p(90) latency is above our target then we know we need to throttle.
With this change in place we are seeing the same throttling behavior
with our testcase on ssd's as we see with rotational drives.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is logic to keep cgroups that haven't done a lot of IO in the most
recent scale window from being punished for over-active higher priority
groups. However for things like ssd's where the windows are pretty
short we'll end up with small numbers of samples, so 5% of samples will
come out to 0 if there aren't enough. Make the floor 1 sample to keep
us from improperly bailing out of scaling down.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hitting the case where blk_queue_depth() returned 1 uncovered the fact
that iolatency doesn't actually handle this case properly, it simply
doesn't scale down anybody. For this case we should go straight into
applying the time delay, which we weren't doing. Since we already limit
the floor at 1 request this if statement is not needed, and this allows
us to set our depth to 1 which allows us to apply the delay if needed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We were using blk_queue_depth() assuming that it would return
nr_requests, but we hit a case in production on drives that had to have
NCQ turned off in order for them to not shit the bed which resulted in a
qd of 1, even though the nr_requests was much larger. iolatency really
only cares about requests we are allowed to queue up, as any io that
get's onto the request list is going to be serviced soonish, so we want
to be throttling before the bio gets onto the request list. To make
iolatency work as expected, simply use q->nr_requests instead of
blk_queue_depth() as that is what we actually care about.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NSEC_PER_SEC has type long, so 5 * NSEC_PER_SEC is calculated as a long.
However, 5 seconds is 5,000,000,000 nanoseconds, which overflows a
32-bit long. Make sure all of the targets are calculated as 64-bit
values.
Fixes: 6e25cb01ea ("kyber: implement improved heuristics")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update device_add_disk() to take an 'groups' argument so that
individual drivers can register a device with additional sysfs
attributes.
This avoids race condition the driver would otherwise have if these
groups were to be created with sysfs_add_groups().
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When debugging Kyber, it's really useful to know what latencies we've
been having, how the domain depths have been adjusted, and if we've
actually been throttling. Add three tracepoints, kyber_latency,
kyber_adjust, and kyber_throttled, to record that.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kyber's current heuristics have a few flaws:
- It's based on the mean latency, but p99 latency tends to be more
meaningful to anyone who cares about latency. The mean can also be
skewed by rare outliers that the scheduler can't do anything about.
- The statistics calculations are purely time-based with a short window.
This works for steady, high load, but is more sensitive to outliers
with bursty workloads.
- It only considers the latency once an I/O has been submitted to the
device, but the user cares about the time spent in the kernel, as
well.
These are shortcomings of the generic blk-stat code which doesn't quite
fit the ideal use case for Kyber. So, this replaces the statistics with
a histogram used to calculate percentiles of total latency and I/O
latency, which we then use to adjust depths in a slightly more
intelligent manner:
- Sync and async writes are now the same domain.
- Discards are a separate domain.
- Domain queue depths are scaled by the ratio of the p99 total latency
to the target latency (e.g., if the p99 latency is double the target
latency, we will double the queue depth; if the p99 latency is half of
the target latency, we can halve the queue depth).
- We use the I/O latency to determine whether we should scale queue
depths down: we will only scale down if any domain's I/O latency
exceeds the target latency, which is an indicator of congestion in the
device.
These new heuristics are just as scalable as the heuristics they
replace.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The domain token sbitmaps are currently initialized to the device queue
depth or 256, whichever is larger, and immediately resized to the
maximum depth for that domain (256, 128, or 64 for read, write, and
other, respectively). The sbitmap is never resized larger than that, so
it's unnecessary to allocate a bitmap larger than the maximum depth.
Let's just allocate it to the maximum depth to begin with. This will use
marginally less memory, and more importantly, give us a more appropriate
number of bits per sbitmap word.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kyber will need this in a future change if it is built as a module.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 4bc6339a58 ("block: move blk_stat_add() to
__blk_mq_end_request()") consolidated some calls using ktime_get() so
we'd only need to call it once. Kyber's ->completed_request() hook also
calls ktime_get(), so let's move it to the same place, too.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
trace_block_unplug() takes true for explicit unplugs and false for
implicit unplugs. schedule() unplugs are implicit and should be
reported as timer unplugs. While correct in the legacy code, this has
been inverted in blk-mq since 4.11.
Cc: stable@vger.kernel.org
Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the deadline scheduler is used with a zoned block device, writes
to a zone will be dispatched one at a time. This causes the warning
message:
deadline: forced dispatching is broken (nr_sorted=X), please report this
to be displayed when switching to another elevator with the legacy I/O
path while write requests to a zone are being retained in the scheduler
queue.
Prevent this message from being displayed when executing
elv_drain_elevator() for a zoned block device. __blk_drain_queue() will
loop until all writes are dispatched and completed, resulting in the
desired elevator queue drain without extensive modifications to the
deadline code itself to handle forced-dispatch calls.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Fixes: 8dc8146f9c ("deadline-iosched: Introduce zone locking support")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the blk-mq core processes power management requests
(marked with RQF_PREEMPT) in other states than RPM_ACTIVE, enable
runtime power management for blk-mq.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of allowing requests that are not power management requests
to enter the queue in runtime suspended status (RPM_SUSPENDED), make
the blk_get_request() caller block. This change fixes a starvation
issue: it is now guaranteed that power management requests will be
executed no matter how many blk_get_request() callers are waiting.
For blk-mq, instead of maintaining the q->nr_pending counter, rely
on q->q_usage_counter. Call pm_runtime_mark_last_busy() every time a
request finishes instead of only if the queue depth drops to zero.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A later patch will call blk_freeze_queue_start() followed by
blk_mq_unfreeze_queue() without waiting for q_usage_counter to drop
to zero. Make sure that this doesn't cause a kernel warning to appear
by switching from percpu_ref_reinit() to percpu_ref_resurrect(). The
former namely requires that the refcount it operates on is zero.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of scheduling runtime resume of a request queue after a
request has been queued, schedule asynchronous resume during request
allocation. The new pm_request_resume() calls occur after
blk_queue_enter() has increased the q_usage_counter request queue
member. This change is needed for a later patch that will make request
allocation block while the queue status is not RPM_ACTIVE.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the pm_request_resume() and pm_runtime_mark_last_busy() calls into
two new functions and thereby separate legacy block layer code from code
that works for both the legacy block layer and blk-mq. A later patch will
add calls to the new functions in the blk-mq code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RQF_PREEMPT flag is used for three purposes:
- In the SCSI core, for making sure that power management requests
are executed even if a device is in the "quiesced" state.
- For domain validation by SCSI drivers that use the parallel port.
- In the IDE driver, for IDE preempt requests.
Rename "preempt-only" into "pm-only" because the primary purpose of
this mode is power management. Since the power management core may
but does not have to resume a runtime suspended device before
performing system-wide suspend and since a later patch will set
"pm-only" mode as long as a block device is runtime suspended, make
it possible to set "pm-only" mode from more than one context. Since
with this change scsi_device_quiesce() is no longer idempotent, make
that function return early if it is called for a quiesced queue.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the code for runtime power management from blk-core.c into the
new source file blk-pm.c. Move the corresponding declarations from
<linux/blkdev.h> into <linux/blk-pm.h>. For CONFIG_PM=n, leave out
the declarations of the functions that are not used in that mode.
This patch not only reduces the number of #ifdefs in the block layer
core code but also reduces the size of header file <linux/blkdev.h>
and hence should help to reduce the build time of the Linux kernel
if CONFIG_PM is not defined.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Take the Xen check into the core code instead of delegating it to
the architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A recent commit runs tag iterator callbacks under the rcu read lock,
but existing callbacks do not satisfy the non-blocking requirement.
The commit intended to prevent an iterator from accessing a queue that's
being modified. This patch fixes the original issue by taking a queue
reference instead of reading it, which allows callbacks to make blocking
calls.
Fixes: f5bbbbe4d6 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")
Acked-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only use it in biovec_phys_mergeable and a m68k paravirt driver,
so just opencode it there. Also remove the pointless unsigned long cast
for the offset in the opencoded instances.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These two checks should always be performed together, so merge them into
a single helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The actual recaculation of segments in __blk_recalc_rq_segments will
do this check, so there is no point in forcing it if we know it won't
succeed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Turn the macro into an inline, move it to blk.h and simplify the
arch hooks a bit.
Also rename the function to biovec_phys_mergeable as there is no need
to shout.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep it close to the actual users instead of exposing the function to all
drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make it easier to understand the purpose of the functions that iterate
over requests by documenting their purpose. Fix several minor spelling
and grammer mistakes in comments in these functions.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkg reference counting now uses percpu_ref rather than atomic_t. Let's
make this consistent with css_tryget. This renames blkg_try_get to
blkg_tryget and now returns a bool rather than the blkg or NULL.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that every bio is associated with a blkg, this puts the use of
blkg_get, blkg_try_get, and blkg_put on the hot path. This switches over
the refcnt in blkg to use percpu_ref.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The previous patch in this series removed carrying around a pointer to
the css in blkg. However, the blkg association logic still relied on
taking a reference on the css to ensure we wouldn't fail in getting a
reference for the blkg.
Here the implicit dependency on the css is removed. The association
continues to rely on the tryget logic walking up the blkg tree. This
streamlines the three ways that association can happen: normal, swap,
and writeback.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.
This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A prior patch in this series added blkg association to bios issued by
cgroups. There are two other paths that we want to attribute work back
to the appropriate cgroup: swap and writeback. Here we modify the way
swap tags bios to include the blkg. Writeback will be tackle in the next
patch.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_issue_init among other things initializes the timestamp for an IO.
Rather than have this logic handled by policies, this consolidates it to
be on the init paths (normal, clone, bounce clone).
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously, blkg's were only assigned as needed by blk-iolatency and
blk-throttle. bio->css was also always being associated while blkg was
being looked up and then thrown away in blkcg_bio_issue_check.
This patch begins the cleanup of bio->css and bio->bi_blkg by always
associating a blkg in blkcg_bio_issue_check. This tries to create the
blkg, but if it is not possible, falls back to using the root_blkg of
the request_queue. Therefore, a bio will always be associated with a
blkg. The duplicate association logic is removed from blk-throttle and
blk-iolatency.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are several scenarios where blkg_lookup_create can fail. Examples
include the blkcg dying, request_queue is dying, or simply being OOM. At
the end of the day, most handle this by simply falling back to the
q->root_blkg and calling it a day.
This patch implements the notion of closest blkg. During
blkg_lookup_create, if it fails to create, return the closest blkg
found or the q->root_blkg. blkg_try_get_closest is introduced and used
during association so a bio is always attached to a blkg.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To know when to create a blkg, the general pattern is to do a
blkg_lookup and if that fails, lock and then do a lookup again and if
that fails finally create. It doesn't make much sense for everyone who
wants to do creation to write this themselves.
This changes blkg_lookup_create to do locking and implement this
pattern. The old blkg_lookup_create is renamed to __blkg_lookup_create.
If a call site wants to do its own error handling or already owns the
queue lock, they can use __blkg_lookup_create. This will be used in
upcoming patches.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The accessor function bio_blkcg either returns the blkcg associated with
the bio or finds one in the current context. This can cause an issue
when trying to associate a bio with a blkcg. Particularly, it's the
third case that is problematic:
return css_to_blkcg(task_css(current, io_cgrp_id));
As the above may race against task migration and the cgroup exiting, it
is not always ok to take a reference on the blkcg returned from
bio_blkcg.
This patch adds association ahead of calling bio_blkcg rather than
after. This makes association a required and explicit step along the
code paths for calling bio_blkcg. blk_get_rl is modified as well to get
a reference to the blkcg it may use and blk_put_rl will always put the
reference back. Association is also moved above the bio_blkcg call to
ensure it will not return NULL in blk-iolatency.
BFQ and CFQ utilize this flaw, but due to the complexity, I do not want
to address this in this series. I've created a private version of the
function with notes not to use it describing the flaw. Hopefully soon,
that code can be cleaned up.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Klaus Kusche reported that the I/O busy time in /proc/diskstats was not
updating properly on 4.18. This is because we started using ktime to
track elapsed time, and we convert nanoseconds to jiffies when we update
the partition counter. However, this gets rounded down, so any I/Os that
take less than a jiffy are not accounted for. Previously in this case,
the value of jiffies would sometimes increment while we were doing I/O,
so at least some I/Os were accounted for.
Let's convert the stats to use nanoseconds internally. We still report
milliseconds as before, now more accurately than ever. The value is
still truncated to 32 bits for backwards compatibility.
Fixes: 522a777566 ("block: consolidate struct request timestamp fields")
Cc: stable@vger.kernel.org
Reported-by: Klaus Kusche <klaus.kusche@computerix.info>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As rbtree has native support of caching leftmost node,
i.e. rb_root_cached, no need to do the caching by ourselves.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace a nasty hack with a different nasty hack to prepare for multipage
bio_vecs. By moving the temporary page array as far up as possible in
the space allocated for the bio_vec array we can iterate forward over it
and thus use bio_add_page. Using bio_add_page means we'll be able to
merge physically contiguous pages once support for multipath bio_vecs is
merged.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To reduce latency for interactive and soft real-time applications, bfq
privileges the bfq_queues containing the I/O of these
applications. These privileged queues, referred-to as weight-raised
queues, get a much higher share of the device throughput
w.r.t. non-privileged queues. To preserve this higher share, the I/O
of any non-weight-raised queue must be plugged whenever a sync
weight-raised queue, while being served, remains temporarily empty. To
attain this goal, bfq simply plugs any I/O (from any queue), if a sync
weight-raised queue remains empty while in service.
Unfortunately, this plugging typically lowers throughput with random
I/O, on devices with internal queueing (because it reduces the filling
level of the internal queues of the device).
This commit addresses this issue by restricting the cases where
plugging is performed: if a sync weight-raised queue remains empty
while in service, then I/O plugging is performed only if some of the
active bfq_queues are *not* weight-raised (which is actually the only
circumstance where plugging is needed to preserve the higher share of
the throughput of weight-raised queues). This restriction proved able
to boost throughput in really many use cases needing only maximum
throughput.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Achilles' heel of BFQ is its failing to reach a high throughput
with sync random I/O on flash storage with internal queueing, in case
the processes doing I/O have differentiated weights.
The cause of this failure is as follows. If at least two processes do
sync I/O, and have a different weight from each other, then BFQ plugs
I/O dispatching every time one of these processes, while it is being
served, remains temporarily without pending I/O requests. This
plugging is necessary to guarantee that every process enjoys a
bandwidth proportional to its weight; but it empties the internal
queue(s) of the drive. And this kills throughput with random I/O. So,
if some processes have differentiated weights and do both sync and
random I/O, the end result is a throughput collapse.
This commit tries to counter this problem by injecting the service of
other processes, in a controlled way, while the process in service
happens to have no I/O. This injection is performed only if the medium
is non rotational and performs internal queueing, and the process in
service does random I/O (service injection might be beneficial for
sequential I/O too, we'll work on that).
As an example of the benefits of this commit, on a PLEXTOR PX-256M5S
SSD, and with five processes having differentiated weights and doing
sync random 4KB I/O, this commit makes the throughput with bfq grow by
400%, from 25 to 100MB/s. This higher throughput is 10MB/s lower than
that reached with none. As some less random I/O is added to the mix,
the throughput becomes equal to or higher than that with none.
This commit is a very first attempt to recover throughput without
losing control, and certainly has many limitations. One is, e.g., that
the processes whose service is injected are not chosen so as to
distribute the extra bandwidth they receive in accordance to their
weights. Thus there might be loss of weighted fairness in some
cases. Anyway, this loss concerns extra service, which would not have
been received at all without this commit. Other limitations and issues
will probably show up with usage.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BFQ schedules entities (which represent either per-process queues or
groups of queues) as a function of their timestamps. In particular, as
a function of their (virtual) finish times. The finish time of an
entity is computed as a function of the budget assigned to the entity,
assuming, tentatively, that the entity, once in service, will receive
an amount of service equal to its budget. Then, when the entity is
expired because it finishes to be served, this finish time is updated
as a function of the actual service received by the entity. This
allows the entity to be correctly charged with only the service
received, and then to be correctly re-scheduled.
Yet an entity may receive service also while not being the entity in
service (in the scheduling environment of its parent entity), for
several reasons. If the entity remains with no backlog while receiving
this 'unofficial' service, then it is expired. Also on such an
expiration, the finish time of the entity should be updated to account
for only the service actually received by the entity. Unfortunately,
such an update is not performed for an entity expiring without being
the entity in service.
In a similar vein, the service counter of the entity in service is
reset when the entity is expired, to be ready to be used for next
service cycle. This reset too should be performed also in case an
entity is expired because it remains empty after receiving service
while not being the entity in service. But in this case the reset is
not performed.
This commit performs the above update of the finish time and reset of
the service received, also for an entity expiring while not being the
entity in service.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes gcc '-Wunused-but-set-variable' warning:
block/blk-iolatency.c: In function 'scale_change':
block/blk-iolatency.c:301:7: warning:
variable 'changed' set but not used [-Wunused-but-set-variable]
block/blk-iolatency.c: In function 'iolatency_set_limit':
block/blk-iolatency.c:765:24: warning:
variable 'blkiolat' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After merging the iolatency policy, we potentially now have 4 policies
being registered, but only support 3. This causes one of them to fail
loading. Takashi reports that BFQ no longer works for him, because it
fails to load due to policy registration failure.
Bump to 5 policies, and also add a warning for when we have exceeded
the global amount. If we have to touch this again, we should switch
to a dynamic scheme instead.
Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is pointed that bio_rewind_iter() is one very bad API[1]:
1) bio size may not be restored after rewinding
2) it causes some bogus change, such as 5151842b9d (block: reset
bi_iter.bi_done after splitting bio)
3) rewinding really makes things complicated wrt. bio splitting
4) unnecessary updating of .bi_done in fast path
[1] https://marc.info/?t=153549924200005&r=1&w=2
So this patch takes Kent's suggestion to restore one bio into its original
state via saving bio iterator(struct bvec_iter) in bio_integrity_prep(),
given now bio_rewind_iter() is only used by bio integrity code.
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Hannes Reinecke <hare@suse.com>
Suggested-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix trivial use-after-free. This could be last reference to bfqg.
Fixes: 8f9bebc33d ("block, bfq: access and cache blkg data only when safe")
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible to call fsync on a read-only handle (for example, fsck.ext2
does it when doing read-only check), and this call results in kernel
warning.
The patch b089cfd95d ("block: don't warn for flush on read-only device")
attempted to disable the warning, but it is buggy and it doesn't
(op_is_flush tests flags, but bio_op strips off the flags).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 721c7fc701 ("block: fail op_is_write() requests to read-only partitions")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a very small change a bio gets caught up in a really
unfortunate race between a task migration, cgroup exiting, and itself
trying to associate with a blkg. This is due to css offlining being
performed after the css->refcnt is killed which triggers removal of
blkgs that reach their blkg->refcnt of 0.
To avoid this, association with a blkg should use tryget and fallback to
using the root_blkg.
Fixes: 08e18eab0c ("block: add bi_blkg to the bio for cgroups")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, blkcg destruction relies on a sequence of events:
1. Destruction starts. blkcg_css_offline() is called and blkgs
release their reference to the blkcg. This immediately destroys
the cgwbs (writeback).
2. With blkgs giving up their reference, the blkcg ref count should
become zero and eventually call blkcg_css_free() which finally
frees the blkcg.
Jiufei Xue reported that there is a race between blkcg_bio_issue_check()
and cgroup_rmdir(). To remedy this, blkg destruction becomes contingent
on the completion of all writeback associated with the blkcg. A count of
the number of cgwbs is maintained and once that goes to zero, blkg
destruction can follow. This should prevent premature blkg destruction
related to writeback.
The new process for blkcg cleanup is as follows:
1. Destruction starts. blkcg_css_offline() is called which offlines
writeback. Blkg destruction is delayed on the cgwb_refcnt count to
avoid punting potentially large amounts of outstanding writeback
to root while maintaining any ongoing policies. Here, the base
cgwb_refcnt is put back.
2. When the cgwb_refcnt becomes zero, blkcg_destroy_blkgs() is called
and handles destruction of blkgs. This is where the css reference
held by each blkg is released.
3. Once the blkcg ref count goes to zero, blkcg_css_free() is called.
This finally frees the blkg.
It seems in the past blk-throttle didn't do the most understandable
things with taking data from a blkg while associating with current. So,
the simplification and unification of what blk-throttle is doing caused
this.
Fixes: 08e18eab0c ("block: add bi_blkg to the bio for cgroups")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 4c6994806f.
Destroying blkgs is tricky because of the nature of the relationship. A
blkg should go away when either a blkcg or a request_queue goes away.
However, blkg's pin the blkcg to ensure they remain valid. To break this
cycle, when a blkcg is offlined, blkgs put back their css ref. This
eventually lets css_free() get called which frees the blkcg.
The above commit (4c6994806f) breaks this order of events by trying to
destroy blkgs in css_free(). As the blkgs still hold references to the
blkcg, css_free() is never called.
The race between blkcg_bio_issue_check() and cgroup_rmdir() will be
addressed in the following patch by delaying destruction of a blkg until
all writeback associated with the blkcg has been finished.
Fixes: 4c6994806f ("blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, variable ref_count within the bsg_device struct is of
type atomic_t. For variables being used as reference counters,
the refcount API should be used instead of atomic. The newer
refcount API works to prevent counter overflows and use-after-free
bugs. So, move this varable from the atomic API to refcount,
potentially avoiding the issues mentioned.
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kmem_cache_destroy() can handle NULL pointer correctly, so there is
no need to check e->icq_cache before calling kmem_cache_destroy().
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have two potential issues:
1) After commit 2887e41b91, we only wake one process at the time when
we finish an IO. We really want to wake up as many tasks as can
queue IO. Before this commit, we woke up everyone, which could cause
a thundering herd issue.
2) A task can potentially consume two wakeups, causing us to (in
practice) miss a wakeup.
Fix both by providing our own wakeup function, which stops
__wake_up_common() from waking up more tasks if we fail to get a
queueing token. With the strict ordering we have on the wait list, this
wakes the right tasks and the right amount of tasks.
Based on a patch from Jianchao Wang <jianchao.w.wang@oracle.com>.
Tested-by: Agarwal, Anchal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prep patch for calling the handler from a different context,
no functional changes in this patch.
Tested-by: Agarwal, Anchal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the ability to have per-rq flags. We used
those flags to maintain inflight counts. Since we don't have those
anymore, we have to always maintain inflight counts, even if wbt is
disabled. This is clearly suboptimal.
Add a queue quiesce around changing the wbt latency settings from sysfs
to work around this. With that, we can reliably put the enabled check in
our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be
consistent for the lifetime of the request.
Fixes: c1c80384c8 ("block: remove external dependency on wbt_flags")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to do this inside the loop as well, or we can allow new
IO to supersede previous IO.
Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need the memory barrier before checking the list head,
use the appropriate helper for this. The matching queue
side memory barrier is provided by set_current_state().
Tested-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=FS7e
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
For blk-mq, part_in_flight/rw will invoke blk_mq_in_flight/rw to
account the inflight requests. It will access the queue_hw_ctx and
nr_hw_queues w/o any protection. When updating nr_hw_queues and
blk_mq_in_flight/rw occur concurrently, panic comes up.
Before update nr_hw_queues, the q will be frozen. So we could use
q_usage_counter to avoid the race. percpu_ref_is_zero is used here
so that we will not miss any in-flight request. The access to
nr_hw_queues and queue_hw_ctx in blk_mq_queue_tag_busy_iter are
under rcu critical section, __blk_mq_update_nr_hw_queues could use
synchronize_rcu to ensure the zeroed q_usage_counter to be globally
visible.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when update nr_hw_queues, IO scheduler's init_hctx will
be invoked before the mapping between ctx and hctx is adapted
correctly by blk_mq_map_swqueue. The IO scheduler init_hctx (kyber)
may depend on this mapping and get wrong result and panic finally.
A simply way to fix this is that switch the IO scheduler to 'none'
before update the nr_hw_queues, and then switch it back after
update nr_hw_queues. blk_mq_sched_init_/exit_hctx are removed due
to nobody use them any more.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch removes the duplicate initialization of q->queue_head
in the blk_alloc_queue_node(). This removes the 2nd initialization
so that we preserve the initialization order same as declaration
present in struct request_queue.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because blk_do_io_stat() only does a judgement about the request
contributes to IO statistics, it better changes return type to bool.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The value that struct cftype .write() method returns is then directly
returned to userspace as the value returned by write() syscall, so it
should be the number of bytes actually written (or consumed) and not zero.
Returning zero from write() syscall makes programs like /bin/echo or bash
spin.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bfq_bfqq_charge_time contains some lengthy and redundant code. This
commit trims and condenses that code.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a sync request is dispatched, the queue that contains that
request, and all the ancestor entities of that queue, are charged with
the number of sectors of the request. In constrast, if the request is
async, then the queue and its ancestor entities are charged with the
number of sectors of the request, multiplied by an overcharge
factor. This throttles the bandwidth for async I/O, w.r.t. to sync
I/O, and it is done to counter the tendency of async writes to steal
I/O throughput to reads.
On the opposite end, the lower this parameter, the stabler I/O
control, in the following respect. The lower this parameter is, the
less the bandwidth enjoyed by a group decreases
- when the group does writes, w.r.t. to when it does reads;
- when other groups do reads, w.r.t. to when they do writes.
The fixes "block, bfq: always update the budget of an entity when
needed" and "block, bfq: readd missing reset of parent-entity service"
improved I/O control in bfq to such an extent that it has been
possible to revise this overcharge factor downwards. This commit
introduces the resulting, new value.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the next child entity to serve changes for a given parent entity,
the budget of that parent entity must be updated accordingly.
Unfortunately, this update is not performed, by mistake, for the
entities that happen to switch from having no child entity to serve,
to having one child entity to serve.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The received-service counter needs to be equal to 0 when an entity is
set in service. Unfortunately, commit "block, bfq: fix service being
wrongly set to zero in case of preemption" mistakenly removed the
resetting of this counter for the parent entities of the bfq_queue
being set in service. This commit fixes this issue by resetting
service for parent entities, directly on the expiration of the
in-service bfq_queue.
Fixes: 9fae8dd59f ("block, bfq: fix service being wrongly set to zero in case of preemption")
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
On wbt invariant is that if one IO is tracked via WBT_TRACKED, rqw->inflight
should be updated for tracking this IO.
But commit c1c80384c8 ("block: remove external dependency on wbt_flags")
forgets to remove the early handling of !rwb_enabled(rwb) inside wbt_wait(),
then the inflight counter may not be increased in wbt_wait(), but decreased
in wbt_done() for this kind of IO, so this counter may become negative, then
wbt_wait() may wait forever.
This patch fixes the report in the following link:
https://marc.info/?l=linux-block&m=153221542021033&w=2
Fixes: c1c80384c8 ("block: remove external dependency on wbt_flags")
Cc: Josef Bacik <jbacik@fb.com>
Reported-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't warn for a flush issued to a read-only device. It's not strictly
a writable command, as it doesn't change any on-media data by itself.
Reported-by: Stefan Agner <stefan@agner.ch>
Fixes: 721c7fc701 ("block: fail op_is_write() requests to read-only partitions")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For legacy queues the only call of blkg_root_lookup() happens after
bypass mode has been enabled. Since blkg_lookup() returns NULL for
queues in bypass mode, modify the blkg_root_lookup() such that it
no longer depends on bypass mode. Rename the function into
blk_queue_root_blkg() as suggested by Tejun.
Suggested-by: Tejun Heo <tj@kernel.org>
Fixes: 6bad9b210a ("blkcg: Introduce blkg_root_lookup()")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several block drivers call alloc_disk() followed by put_disk() if
something fails before device_add_disk() is called without calling
blk_cleanup_queue(). Make sure that also for this scenario a request
queue is dissociated from the cgroup controller. This patch avoids
that loading the parport_pc, paride and pf drivers triggers the
following kernel crash:
BUG: KASAN: null-ptr-deref in pi_init+0x42e/0x580 [paride]
Read of size 4 at addr 0000000000000008 by task modprobe/744
Call Trace:
dump_stack+0x9a/0xeb
kasan_report+0x139/0x350
pi_init+0x42e/0x580 [paride]
pf_init+0x2bb/0x1000 [pf]
do_one_initcall+0x8e/0x405
do_init_module+0xd9/0x2f2
load_module+0x3ab4/0x4700
SYSC_finit_module+0x176/0x1a0
do_syscall_64+0xee/0x2b0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Reported-by: Alexandru Moise <00moses.alexander00@gmail.com>
Fixes: a063057d7c ("block: Fix a race between request queue removal and the block cgroup controller") # v4.17
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Alexandru Moise <00moses.alexander00@gmail.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Alexandru Moise <00moses.alexander00@gmail.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, we count the hctx as active after allocate driver tag
successfully. If a previously inactive hctx try to get tag first
time, it may fails and need to wait. However, due to the stale tag
->active_queues, the other shared-tags users are still able to
occupy all driver tags while there is someone waiting for tag.
Consequently, even if the previously inactive hctx is waked up, it
still may not be able to get a tag and could be starved.
To fix it, we count the hctx as active before try to allocate driver
tag, then when it is waiting the tag, the other shared-tag users
will reserve budget for it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit ed996a52c8 ("block: simplify and cleanup bvec pool
handling"), the value of the slab index is incremented by one in
bvec_alloc() after the allocation is done to indicate an index value of
0 does not need to be later freed.
bvec_nr_vecs() was not updated accordingly, and thus returns the wrong
value. Decrement idx before performing the lookup.
Fixes: ed996a52c8 ("block: simplify and cleanup bvec pool handling")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch does not change any functionality but avoids that gcc
reports the following warnings when building with W=1:
block/cfq-iosched.c: In function ?cfq_back_seek_max_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4756:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4759:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4760:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_low_latency_store?:
block/cfq-iosched.c:4741:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4765:1: note: in expansion of macro ?STORE_FUNCTION?
STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
^~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_slice_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4782:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
USEC_STORE_FUNCTION(cfq_slice_idle_us_store, &cfqd->cfq_slice_idle, 0, UINT_MAX);
^~~~~~~~~~~~~~~~~~~
block/cfq-iosched.c: In function ?cfq_group_idle_us_store?:
block/cfq-iosched.c:4775:13: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (__data < (MIN)) \
^
block/cfq-iosched.c:4783:1: note: in expansion of macro ?USEC_STORE_FUNCTION?
USEC_STORE_FUNCTION(cfq_group_idle_us_store, &cfqd->cfq_group_idle, 0, UINT_MAX);
^~~~~~~~~~~~~~~~~~~
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that gcc complains about fall-through when building
with W=1.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I am currently running a large bare metal instance (i3.metal)
on EC2 with 72 cores, 512GB of RAM and NVME drives, with a
4.18 kernel. I have a workload that simulates a database
workload and I am running into lockup issues when writeback
throttling is enabled,with the hung task detector also
kicking in.
Crash dumps show that most CPUs (up to 50 of them) are
all trying to get the wbt wait queue lock while trying to add
themselves to it in __wbt_wait (see stack traces below).
[ 0.948118] CPU: 45 PID: 0 Comm: swapper/45 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
[ 0.948119] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
[ 0.948120] task: ffff883f7878c000 task.stack: ffffc9000c69c000
[ 0.948124] RIP: 0010:native_queued_spin_lock_slowpath+0xf8/0x1a0
[ 0.948125] RSP: 0018:ffff883f7fcc3dc8 EFLAGS: 00000046
[ 0.948126] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7fce2a00
[ 0.948128] RDX: 000000000000001c RSI: 0000000000740001 RDI: ffff887f7709ca68
[ 0.948129] RBP: 0000000000000002 R08: 0000000000b80000 R09: 0000000000000000
[ 0.948130] R10: ffff883f7fcc3d78 R11: 000000000de27121 R12: 0000000000000002
[ 0.948131] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[ 0.948132] FS: 0000000000000000(0000) GS:ffff883f7fcc0000(0000) knlGS:0000000000000000
[ 0.948134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.948135] CR2: 000000c424c77000 CR3: 0000000002010005 CR4: 00000000003606e0
[ 0.948136] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.948137] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 0.948138] Call Trace:
[ 0.948139] <IRQ>
[ 0.948142] do_raw_spin_lock+0xad/0xc0
[ 0.948145] _raw_spin_lock_irqsave+0x44/0x4b
[ 0.948149] ? __wake_up_common_lock+0x53/0x90
[ 0.948150] __wake_up_common_lock+0x53/0x90
[ 0.948155] wbt_done+0x7b/0xa0
[ 0.948158] blk_mq_free_request+0xb7/0x110
[ 0.948161] __blk_mq_complete_request+0xcb/0x140
[ 0.948166] nvme_process_cq+0xce/0x1a0 [nvme]
[ 0.948169] nvme_irq+0x23/0x50 [nvme]
[ 0.948173] __handle_irq_event_percpu+0x46/0x300
[ 0.948176] handle_irq_event_percpu+0x20/0x50
[ 0.948179] handle_irq_event+0x34/0x60
[ 0.948181] handle_edge_irq+0x77/0x190
[ 0.948185] handle_irq+0xaf/0x120
[ 0.948188] do_IRQ+0x53/0x110
[ 0.948191] common_interrupt+0x87/0x87
[ 0.948192] </IRQ>
....
[ 0.311136] CPU: 4 PID: 9737 Comm: run_linux_amd64 Not tainted 4.14.51-62.38.amzn1.x86_64 #1
[ 0.311137] Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
[ 0.311138] task: ffff883f6e6a8000 task.stack: ffffc9000f1ec000
[ 0.311141] RIP: 0010:native_queued_spin_lock_slowpath+0xf5/0x1a0
[ 0.311142] RSP: 0018:ffffc9000f1efa28 EFLAGS: 00000046
[ 0.311144] RAX: 0000000000000000 RBX: ffff887f7709ca68 RCX: ffff883f7f722a00
[ 0.311145] RDX: 0000000000000035 RSI: 0000000000d80001 RDI: ffff887f7709ca68
[ 0.311146] RBP: 0000000000000202 R08: 0000000000140000 R09: 0000000000000000
[ 0.311147] R10: ffffc9000f1ef9d8 R11: 000000001a249fa0 R12: ffff887f7709ca68
[ 0.311148] R13: ffffc9000f1efad0 R14: 0000000000000000 R15: ffff887f7709ca00
[ 0.311149] FS: 000000c423f30090(0000) GS:ffff883f7f700000(0000) knlGS:0000000000000000
[ 0.311150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.311151] CR2: 00007feefcea4000 CR3: 0000007f7016e001 CR4: 00000000003606e0
[ 0.311152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 0.311153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 0.311154] Call Trace:
[ 0.311157] do_raw_spin_lock+0xad/0xc0
[ 0.311160] _raw_spin_lock_irqsave+0x44/0x4b
[ 0.311162] ? prepare_to_wait_exclusive+0x28/0xb0
[ 0.311164] prepare_to_wait_exclusive+0x28/0xb0
[ 0.311167] wbt_wait+0x127/0x330
[ 0.311169] ? finish_wait+0x80/0x80
[ 0.311172] ? generic_make_request+0xda/0x3b0
[ 0.311174] blk_mq_make_request+0xd6/0x7b0
[ 0.311176] ? blk_queue_enter+0x24/0x260
[ 0.311178] ? generic_make_request+0xda/0x3b0
[ 0.311181] generic_make_request+0x10c/0x3b0
[ 0.311183] ? submit_bio+0x5c/0x110
[ 0.311185] submit_bio+0x5c/0x110
[ 0.311197] ? __ext4_journal_stop+0x36/0xa0 [ext4]
[ 0.311210] ext4_io_submit+0x48/0x60 [ext4]
[ 0.311222] ext4_writepages+0x810/0x11f0 [ext4]
[ 0.311229] ? do_writepages+0x3c/0xd0
[ 0.311239] ? ext4_mark_inode_dirty+0x260/0x260 [ext4]
[ 0.311240] do_writepages+0x3c/0xd0
[ 0.311243] ? _raw_spin_unlock+0x24/0x30
[ 0.311245] ? wbc_attach_and_unlock_inode+0x165/0x280
[ 0.311248] ? __filemap_fdatawrite_range+0xa3/0xe0
[ 0.311250] __filemap_fdatawrite_range+0xa3/0xe0
[ 0.311253] file_write_and_wait_range+0x34/0x90
[ 0.311264] ext4_sync_file+0x151/0x500 [ext4]
[ 0.311267] do_fsync+0x38/0x60
[ 0.311270] SyS_fsync+0xc/0x10
[ 0.311272] do_syscall_64+0x6f/0x170
[ 0.311274] entry_SYSCALL_64_after_hwframe+0x42/0xb7
In the original patch, wbt_done is waking up all the exclusive
processes in the wait queue, which can cause a thundering herd
if there is a large number of writer threads in the queue. The
original intention of the code seems to be to wake up one thread
only however, it uses wake_up_all() in __wbt_done(), and then
uses the following check in __wbt_wait to have only one thread
actually get out of the wait loop:
if (waitqueue_active(&rqw->wait) &&
rqw->wait.head.next != &wait->entry)
return false;
The problem with this is that the wait entry in wbt_wait is
define with DEFINE_WAIT, which uses the autoremove wakeup function.
That means that the above check is invalid - the wait entry will
have been removed from the queue already by the time we hit the
check in the loop.
Secondly, auto-removing the wait entries also means that the wait
queue essentially gets reordered "randomly" (e.g. threads re-add
themselves in the order they got to run after being woken up).
Additionally, new requests entering wbt_wait might overtake requests
that were queued earlier, because the wait queue will be
(temporarily) empty after the wake_up_all, so the waitqueue_active
check will not stop them. This can cause certain threads to starve
under high load.
The fix is to leave the woken up requests in the queue and remove
them in finish_wait() once the current thread breaks out of the
wait loop in __wbt_wait. This will ensure new requests always
end up at the back of the queue, and they won't overtake requests
that are already in the wait queue. With that change, the loop
in wbt_wait is also in line with many other wait loops in the kernel.
Waking up just one thread drastically reduces lock contention, as
does moving the wait queue add/remove out of the loop.
A significant drop in lockdep's lock contention numbers is seen when
running the test application on the patched kernel.
Signed-off-by: Anchal Agarwal <anchalag@amazon.com>
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltU8z0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5X8H/2fJr7m3k242+t76
sitwvx1eoPqTgryW59dRKm9IuXAGA+AjauvHzaz1QxomeQa50JghGWefD0eiJfkA
1AphQ/24EOiAbbVk084dAI/C2p122dE4D5Fy7CrfLnuouyrbFaZI5STbnrRct7sR
9deeYW0GDHO1Uenp4WDCj0baaqJqaevZ+7GG09DnWpya2nQtSkGBjqn6GpYmrfOU
mqFuxAX8mEOW6cwK16y/vYtnVjuuMAiZ63/OJ8AQ6d6ArGLwAsdn7f8Fn4I4tEr2
L0d3CRLUyegms4++Dmlu05k64buQu46WlPhjCZc5/Ts4kjrNxBuHejj2/jeSnUSt
vJJlibI=
=42a5
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rc6' into for-4.19/block2
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a
merge conflict down the line.
Signed-of-by: Jens Axboe <axboe@kernel.dk>
It turns out that commit 721c7fc701 ("block: fail op_is_write()
requests to read-only partitions"), while obviously correct, causes
problems for some older lvm2 installations.
The reason is that the lvm snapshotting will continue to write to the
snapshow COW volume, even after the volume has been marked read-only.
End result: snapshot failure.
This has actually been fixed in newer version of the lvm2 tool, but the
old tools still exist, and the breakage was reported both in the kernel
bugzilla and in the Debian bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=200439https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900442
The lvm2 fix is here
https://sourceware.org/git/?p=lvm2.git;a=commit;h=a6fdb9d9d70f51c49ad11a87ab4243344e6701a3
but until everybody has updated to recent versions, we'll have to weaken
the "never write to read-only partitions" check. It now allows the
write to happen, but causes a warning, something like this:
generic_make_request: Trying to write to read-only block-device dm-3 (partno X)
Modules linked in: nf_tables xt_cgroup xt_owner kvm_intel iwlmvm kvm irqbypass iwlwifi
CPU: 1 PID: 77 Comm: kworker/1:1 Not tainted 4.17.9-gentoo #3
Hardware name: LENOVO 20B6A019RT/20B6A019RT, BIOS GJET91WW (2.41 ) 09/21/2016
Workqueue: ksnaphd do_metadata
RIP: 0010:generic_make_request_checks+0x4ac/0x600
...
Call Trace:
generic_make_request+0x64/0x400
submit_bio+0x6c/0x140
dispatch_io+0x287/0x430
sync_io+0xc3/0x120
dm_io+0x1f8/0x220
do_metadata+0x1d/0x30
process_one_work+0x1b9/0x3e0
worker_thread+0x2b/0x3c0
kthread+0x113/0x130
ret_from_fork+0x35/0x40
Note that this is a "revert" in behavior only. I'm leaving alone the
actual code cleanups in commit 721c7fc701, but letting the previously
uncaught request go through with a warning instead of stopping it.
Fixes: 721c7fc701 ("block: fail op_is_write() requests to read-only partitions")
Reported-and-tested-by: WGH <wgh@torlan.ru>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=Ml3z
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180803' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a single fix, from Ming, fixing a regression in this cycle where
the busy tag iteration was changed to only calling the callback
function for requests that are started. We really want all non-free
requests.
This fixes a boot regression on certain VM setups"
* tag 'for-linus-20180803' of git://git.kernel.dk/linux-block:
blk-mq: fix blk_mq_tagset_busy_iter
Commit d250bf4e776ff09d5("blk-mq: only iterate over inflight requests
in blk_mq_tagset_busy_iter") uses 'blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT'
to replace 'blk_mq_request_started(req)', this way is wrong, and causes
lots of test system hang during booting.
Fix the issue by using blk_mq_request_started(req) inside bt_tags_iter().
Fixes: d250bf4e77 ("blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iter")
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The passed 'nr' from userspace represents the total depth, meantime
inside 'struct blk_mq_tags', 'nr_tags' stores the total tag depth,
and 'nr_reserved_tags' stores the reserved part.
There are two issues in blk_mq_tag_update_depth() now:
1) for growing tags, we should have used the passed 'nr', and keep the
number of reserved tags not changed.
2) the passed 'nr' should have been used for checking against
'tags->nr_tags', instead of number of the normal part.
This patch fixes the above two cases, and avoids kernel crash caused
by wrong resizing sbitmap queue.
Cc: "Ewan D. Milne" <emilne@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Omar Sandoval <osandov@fb.com>
Tested by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Runtime PM isn't ready for blk-mq yet, and commit 765e40b675 ("block:
disable runtime-pm for blk-mq") tried to disable it. Unfortunately,
it can't take effect in that way since user space still can switch
it on via 'echo auto > /sys/block/sdN/device/power/control'.
This patch disables runtime-pm for blk-mq really by pm_runtime_disable()
and fixes all kinds of PM related kernel crash.
Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Przemek Socha <soprwa@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, avg_lat is calculated by accumulating the mean of every
window in a long running cumulative average. As time goes on, the metric
becomes less and less useful due to the accumulated history.
This patch reuses the same calculation done in load averages to make the
avg_lat metric more lively. Unlike load averages, the avg only advances
when a window elapses (due to an io). Idle periods extend the most
recent window. Bucketing is used to limit the history of avg_lat by
binding it to the window size. So, the window range for 1/exp (decay
rate) is [1 min, 2.5 min) when windows elapse immediately.
The current sample window size is exposed in the debug info to enable
calculation of the window range.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The blkg lifetime is protected by the queue lifetime, so we need to put
the queue _after_ we're done using the blkg.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At this point we have a ref on the blkg, we need to drop it if we don't
have a iolat.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the code by using the PTR_ERR_OR_ZERO, instead of the
open code. It is better.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We find the memory use-after-free issue in __blk_drain_queue()
on the kernel 4.14. After read the latest kernel 4.18-rc6 we
think it has the same problem.
Memory is allocated for q->fq in the blk_init_allocated_queue().
If the elevator init function called with error return, it will
run into the fail case to free the q->fq.
Then the __blk_drain_queue() uses the same memory after the free
of the q->fq, it will lead to the unpredictable event.
The patch is to set q->fq as NULL in the fail case of
blk_init_allocated_queue().
Fixes: commit 7c94e1c157 ("block: introduce blk_flush_queue to drive flush machinery")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: xiao jin <jin.xiao@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently these functions are implemented in the scsi layer, but their
actual place should be the block layer since T10-PI is a general data
integrity feature that is used in the nvme protocol as well. Also, use
the tuple size from the integrity profile since it may vary between
integrity types.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=2ogY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20180727' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Bigger than usual at this time, mostly due to the O_DIRECT corruption
issue and the fact that I was on vacation last week. This contains:
- NVMe pull request with two fixes for the FC code, and two target
fixes (Christoph)
- a DIF bio reset iteration fix (Greg Edwards)
- two nbd reply and requeue fixes (Josef)
- SCSI timeout fixup (Keith)
- a small series that fixes an issue with bio_iov_iter_get_pages(),
which ended up causing corruption for larger sized O_DIRECT writes
that ended up racing with buffered writes (Martin Wilck)"
* tag 'for-linus-20180727' of git://git.kernel.dk/linux-block:
block: reset bi_iter.bi_done after splitting bio
block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs
blkdev: __blkdev_direct_IO_simple: fix leak in error case
block: bio_iov_iter_get_pages: fix size of last iovec
nvmet: only check for filebacking on -ENOTBLK
nvmet: fixup crash on NULL device path
scsi: set timed out out mq requests to complete
blk-mq: export setting request completion state
nvme: if_ready checks to fail io to deleting controller
nvmet-fc: fix target sgl list on large transfers
nbd: handle unexpected replies better
nbd: don't requeue the same request twice.
Even if properly initialized, the lvname array (i.e., strings)
is read from disk, and might contain corrupt data (e.g., lack
the null terminating character for strings).
So, make sure the partition name string used in pr_warn() has
the null terminating character.
Fixes: 6ceea22bbb ("partitions: add aix lvm partition support files")
Suggested-by: Daniel J. Axtens <daniel.axtens@canonical.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The if-block that sets a successful return value in aix_partition()
uses 'lvip[].pps_per_lv' and 'n[].name' potentially uninitialized.
For example, if 'numlvs' is zero or alloc_lvn() fails, neither is
initialized, but are used anyway if alloc_pvd() succeeds after it.
So, make the alloc_pvd() call conditional on their initialization.
This has been hit when attaching an apparently corrupted/stressed
AIX LUN, misleading the kernel to pr_warn() invalid data and hang.
[...] partition (null) (11 pp's found) is not contiguous
[...] partition (null) (2 pp's found) is not contiguous
[...] partition (null) (3 pp's found) is not contiguous
[...] partition (null) (64 pp's found) is not contiguous
Fixes: 6ceea22bbb ("partitions: add aix lvm partition support files")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the bio has been updated to represent the remaining sectors, reset
bi_done so bio_rewind_iter() does not rewind further than it should.
This resolves a bio_integrity_process() failure on reads where the
original request was split.
Fixes: 63573e359d ("bio-integrity: Restore original iterator on verify stage")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows bio_integrity_bytes() to be called from drivers instead of
open coding it.
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_iov_iter_get_pages() currently only adds pages for the next non-zero
segment from the iov_iter to the bio. That's suboptimal for callers,
which typically try to pin as many pages as fit into the bio. This patch
converts the current bio_iov_iter_get_pages() into a static helper, and
introduces a new helper that allocates as many pages as
1) fit into the bio,
2) are present in the iov_iter,
3) and can be pinned by MM.
Error is returned only if zero pages could be pinned. Because of 3), a
zero return value doesn't necessarily mean all pages have been pinned.
Callers that have to pin every page in the iov_iter must still call this
function in a loop (this is currently the case).
This change matters most for __blkdev_direct_IO_simple(), which calls
bio_iov_iter_get_pages() only once. If it obtains less pages than
requested, it returns a "short write" or "short read", and
__generic_file_write_iter() falls back to buffered writes, which may
lead to data corruption.
Fixes: 72ecad22d9 ("block: support a full bio worth of IO for simplified bdev direct-io")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the last page of the bio is not "full", the length of the last
vector slot needs to be corrected. This slot has the index
(bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper
array, which is shifted by the value of bio->bi_vcnt at function
invocation, the correct index is (nr_pages - 1).
v2: improved readability following suggestions from Ming Lei.
v3: followed a formatting suggestion from Christoph Hellwig.
Fixes: 2cefe4dbaa ("block: add bio_iov_iter_get_pages()")
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set max_discard_segments to USHRT_MAX in blk_set_stacking_limits() so
that blk_stack_limits() can stack up this limit for stacked devices.
before:
$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
1
after:
$ cat /sys/block/nvme0n1/queue/max_discard_segments
256
$ cat /sys/block/dm-0/queue/max_discard_segments
256
Fixes: 1e739730c5 ("block: optionally merge discontiguous discard bios into a single request")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now only used by the bounce code, so move it there and mark the function
static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is preparing for drivers that want to directly alter the state of
their requests. No functional change here.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So don't bother handling it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_check_pages_dirty currently inviolates the invariant that bv_page of
a bio_vec inside bi_vcnt shouldn't be zero, and that is going to become
really annoying with multpath biovecs. Fortunately there isn't any
all that good reason for it - once we decide to defer freeing the bio
to a workqueue holding onto a few additional pages isn't really an
issue anymore. So just check if there is a clean page that needs
dirtying in the first path, and do a second pass to free them if there
was none, while the cache is still hot.
Also use the chance to micro-optimize bio_dirty_fn a bit by not saving
irq state - we know we are called from a workqueue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inside blk_mq_try_issue_list_directly(), if the request is issued as
failed, we shouldn't try to do it again, otherwise the warning in
blk_mq_start_request() will be triggered. This change is aligned to
behaviour of other ways of request issue & dispatch.
Fixes: 6ce3dd6eec ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: LKP <lkp@01.org>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the change to use UINT_MAX I broke the depth check as any value of
inflight (ie 0) would be less than (int)UINT_MAX. Fix this by changing
everything to unsigned int to match the depth.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add tracking of REQ_OP_DISCARD ios to the per-cgroup io.stat. Two
fields, dbytes and dios, to respectively count the total bytes and
number of discards are added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Cc: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add tracking of REQ_OP_DISCARD ios to the partition statistics and
append them to the various stat files in /sys as well as
/proc/diskstats. These are tracked with the same four stats as reads
and writes:
Number of discard ios completed.
Number of discard ios merged
Number of discard sectors completed
Milliseconds spent on discard requests
This is done via adding a new STAT_DISCARD define to genhd.h and then
using it to index that stat field for discard requests.
tj: Refreshed on top of v4.17 and other previous updates.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andy Newell <newella@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add and use a new op_stat_group() function for indexing partition stat
fields rather than indexing them by rq_data_dir() or bio_data_dir().
This function works similarly to op_is_sync() in that it takes the
request::cmd_flags or bio::bi_opf flags and determines which stats
should et updated.
In addition, the second parameter to generic_start_io_acct() and
generic_end_io_acct() is now a REQ_OP rather than simply a read or
write bit and it uses op_stat_group() on the parameter to determine
the stat group.
Note that the partition in_flight counts are not part of the per-cpu
statistics and as such are not indexed via this function. It's now
indexed by op_is_write().
tj: Refreshed on top of v4.17. Updated to pass around REQ_OP.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Alasdair Kergon <agk@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add defines for STAT_READ and STAT_WRITE for indexing the partition
stat entries. This clarifies some fs/ code which has hardcoded 1 for
STAT_WRITE and will make it easier to extend the stats with additional
fields.
tj: Refreshed on top of v4.17.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In case of 'none' io scheduler, when hw queue isn't busy, it isn't
necessary to enqueue request to sw queue and dequeue it from
sw queue because request may be submitted to hw queue asap without
extra cost, meantime there shouldn't be much request in sw queue,
and we don't need to worry about effect on IO merge.
There are still some single hw queue SCSI HBAs(HPSA, megaraid_sas, ...)
which may connect high performance devices, so 'none' is often required
for obtaining good performance.
This patch improves IOPS and decreases CPU unilization on megaraid_sas,
per Kashyap's test.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Kashyap Desai <kashyap.desai@broadcom.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In our longer tests we noticed that some boxes would degrade to the
point of uselessness. This is because we truncate the current time when
saving it in our bio, but I was using the raw current time to subtract
from. So once the box had been up a certain amount of time it would
appear as if our IO's were taking several years to complete. Fix this
by truncating the current time so it matches the issue time. Verified
this worked by running with this patch for a week on our test tier.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Early versions of these patches had us waiting for seconds at a time
during submission, so we had to adjust the timing window we monitored
for latency. Now we don't do things like that so this is unnecessary
code.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The code poses a security risk due to user memory access in ->release
and had an API that can't be used reliably. As far as we know it was
never used for real, but if that turns out wrong we'll have to revert
this commit and come up with a band aid.
Jann Horn did look software archives for users of this interface,
and the only users found were example code in sg3_utils, and optional
support in an optional module of the tgt user space iscsi target,
which looks like a proof of concept extension of the /dev/sg
read/write support.
Tony Battersby chimes in that the code is basically unsafe to use in
general:
The read/write interface on /dev/bsg is impossible to use safely
because the list of completed commands is per-device (bd->done_list)
rather than per-fd like it is with /dev/sg. So if program A and
program B are both using the write/read interface on the same bsg
device, then their command responses will get mixed up, and program
A will read() some command results from program B and vice versa.
So no, I don't use read/write on /dev/bsg. From a security standpoint,
it should definitely be fixed or removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a regression introduced in Linux kernel 4.17 where sending a SCSI
command that does not transfer data (such as TEST UNIT READY) via
/dev/bsg/* results in EINVAL.
Fixes: 17cb960f29 ("bsg: split handling of SCSI CDBs vs transport requeues")
Cc: <stable@vger.kernel.org> # 4.17+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
max_depth used to be a u64, but I changed it to a unsigned int but
didn't convert my comparisons over everywhere. Fix by using UINT_MAX
everywhere instead of (u64)-1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On 32-bit architectures, dividing a 64-bit number needs to use the
do_div() function or something like it to avoid a link failure:
block/blk-iolatency.o: In function `iolatency_prfill_limit':
blk-iolatency.c:(.text+0x8cc): undefined reference to `__aeabi_uldivmod'
Using div_u64() gives us the best output and avoids the need for an
explicit cast.
Fixes: d706751215 ("block: introduce blk-iolatency io controller")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With gcc 4.9.0 and 7.3.0:
block/blk-core.c: In function 'blk_pm_allow_request':
block/blk-core.c:2747:2: warning: enumeration value 'RPM_ACTIVE' not handled in switch [-Wswitch]
switch (rq->q->rpm_status) {
^
Convert the return statement below the switch() block into a default
case to fix this.
Fixes: e4f36b249b ("block: fix peeking requests during PM")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If __blkdev_issue_discard is in progress and a device mapper device is
reloaded with a table that doesn't support discard,
q->limits.max_discard_sectors is set to zero. This results in infinite
loop in __blkdev_issue_discard.
This patch checks if max_discard_sectors is zero and aborts with
-EOPNOTSUPP.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Zdenek Kabelac <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The flag GFP_ATOMIC already contains __GFP_HIGH. There is no need to
explicitly or __GFP_HIGH again. So, just remove unnecessary __GFP_HIGH.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current IO controllers for the block layer are less than ideal for our
use case. The io.max controller is great at hard limiting, but it is
not work conserving. This patch introduces io.latency. You provide a
latency target for your group and we monitor the io in short windows to
make sure we are not exceeding those latency targets. This makes use of
the rq-qos infrastructure and works much like the wbt stuff. There are
a few differences from wbt
- It's bio based, so the latency covers the whole block layer in addition to
the actual io.
- We will throttle all IO types that comes in here if we need to.
- We use the mean latency over the 100ms window. This is because writes can
be particularly fast, which could give us a false sense of the impact of
other workloads on our protected workload.
- By default there's no throttling, we set the queue_depth to INT_MAX so that
we can have as many outstanding bio's as we're allowed to. Only at
throttle time do we pay attention to the actual queue depth.
- We backcharge cgroups for root cg issued IO and induce artificial
delays in order to deal with cases like metadata only or swap heavy
workloads.
In testing this has worked out relatively well. Protected workloads
will throttle noisy workloads down to 1 io at time if they are doing
normal IO on their own, or induce up to a 1 second delay per syscall if
they are doing a lot of root issued IO (metadata/swap IO).
Our testing has revolved mostly around our production web servers where
we have hhvm (the web server application) in a protected group and
everything else in another group. We see slightly higher requests per
second (RPS) on the test tier vs the control tier, and much more stable
RPS across all machines in the test tier vs the control tier.
Another test we run is a slow memory allocator in the unprotected group.
Before this would eventually push us into swap and cause the whole box
to die and not recover at all. With these patches we see slight RPS
drops (usually 10-15%) before the memory consumer is properly killed and
things recover within seconds.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
wbt cares only about request completion time, but controllers may need
information that is on the bio itself, so add a done_bio callback for
rq-qos so things like blk-iolatency can use it to have the bio when it
completes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't really need to save this stuff in the core block code, we can
just pass the bio back into the helpers later on to derive the same
flags and update the rq->wbt_flags appropriately.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg-qos is going to do essentially what wbt does, only on a cgroup
basis. Break out the common code that will be shared between blkcg-qos
and wbt into blk-rq-qos.* so they can both utilize the same
infrastructure.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to use blk_rq_stat in the blkcg qos stuff, so export some of
these helpers so they can be used by other things.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since IO can be issued from literally anywhere it's almost impossible to
do throttling without having some sort of adverse effect somewhere else
in the system because of locking or other dependencies. The best way to
solve this is to do the throttling when we know we aren't holding any
other kernel resources. Do this by tracking throttling in a per-blkg
basis, and if we require throttling flag the task that it needs to check
before it returns to user space and possibly sleep there.
This is to address the case where a process is doing work that is
generating IO that can't be throttled, whether that is directly with a
lot of REQ_META IO, or indirectly by allocating so much memory that it
is swamping the disk with REQ_SWAP. We can't use task_add_work as we
don't want to induce a memory allocation in the IO path, so simply
saving the request queue in the task and flagging it to do the
notify_resume thing achieves the same result without the overhead of a
memory allocation.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For backcharging we need to know who the page belongs to when swapping
it out. We don't worry about things that do ->rw_page (zram etc) at the
moment, we're only worried about pages that actually go to a block
device.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe