Commit Graph

50098 Commits

Author SHA1 Message Date
David S. Miller f74290fdb3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-02-24 00:04:20 -05:00
Donald Sharp 1b71af6053 net: fib_rules: Add new attribute to set protocol
For ages iproute2 has used `struct rtmsg` as the ancillary header for
FIB rules and in the process set the protocol value to RTPROT_BOOT.
Until ca56209a66 ("net: Allow a rule to track originating protocol")
the kernel rules code ignored the protocol value sent from userspace
and always returned 0 in notifications. To avoid incompatibility with
existing iproute2, send the protocol as a new attribute.

Fixes: cac56209a6 ("net: Allow a rule to track originating protocol")
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 15:47:20 -05:00
Eric Dumazet a5f7add332 net_sched: gen_estimator: fix broken estimators based on percpu stats
pfifo_fast got percpu stats lately, uncovering a bug I introduced last
year in linux-4.10.

I missed the fact that we have to clear our temporary storage
before calling __gnet_stats_copy_basic() in the case of percpu stats.

Without this fix, rate estimators (tc qd replace dev xxx root est 1sec
4sec pfifo_fast) are utterly broken.

Fixes: 1c0d32fde5 ("net_sched: gen_estimator: complete rewrite of rate estimators")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 12:35:46 -05:00
David S. Miller 2217009443 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:

====================
pull-request: bpf 2018-02-22

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel.

2) cond_resched points in percpu array alloc/free paths, from Eric.

3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 12:34:18 -05:00
Sowmini Varadhan 79a5b9727a rds: rds_msg_zcopy should return error of null rm->data.op_mmp_znotifier
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been
specified, the rm->data.op_mmp_znotifier allocation will be skipped.
In this case, it is invalid ot pass down a cmsghdr with
RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this
case.

Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com
Fixes: 0cebaccef3 ("rds: zerocopy Tx support.")
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 12:30:52 -05:00
Arnd Bergmann ca79bec237 ipv6 sit: work around bogus gcc-8 -Wrestrict warning
gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:

net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.

We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.

This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.

Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23 10:53:26 -05:00
David Howells 93c62c45ed rxrpc: Fix send in rxrpc_send_data_packet()
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send
both parts of the iov[] buffer, but one of them does not.  Fix it so that
it does.

Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc
header included, but no payload.

Fixes: 5a924b8951 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 15:37:47 -05:00
David S. Miller 60772e48ec Various updates across wireless.
One thing to note: I've included a new ethertype
 that wireless uses (ETH_P_PREAUTH) in if_ether.h.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlqPJKcACgkQB8qZga/f
 l8TAUw/7BMKG4ofFYRgujmqS+mnSDJx9vgtFHIV3Ymcm9vgdQ6wbNe85ME8J6TpN
 Z/HqtWVhn7BEWqpiDgq0ADTEmU/Vt6AQvy6fJX80+Lz4yup8Dq9dI9/CJ7BlKP+t
 O7/jXkv2RykFv1IAG9US3Xx9rIwLJRP6XndksZMsK4QihdUYOqAqjZ+pLWCHQ7+a
 vFewlUV6t7IMq3R9scL4nf5EmgLWNDNCSOZ6xWDxfDgLHsErbCD9ojRsfAnQWPN0
 1rwPC5kGm9tzGtiPVhA0/a4D0dgiYdv723ubs/waSYX5fimXDPSXsRizVp06ZWC+
 lFW+Mw52WvxriO61MD99xH1O1/svy+YMMgECoPMjGk7QzgY+2xQ/8hUbo91fsj07
 05+rGX3O0SJvB0une3m3ZsZz00DkZDU4Fw0kvO0aSCmE++O4vt/04wmMWxGVfnSo
 RtdrQNSAYrYqHSc+1kIzDAH2jCBBLj0cWdlZPYciYMTRUHOFZmMApyyXVLoOl3yn
 eqLgK8QBNpkjkf5FbF+m0ccHtQ8lkKiZDcqqIVN+dxKuuO9FEfblDty5bZEp8AaT
 Q2soararYeUcNVA2A+Gi1l3qtcj+wWay+CdDcU/QmYbXoxdRh64FBs//y6akIH9p
 p/cNgRP/MyEUEkvGmpva+MdtzCToWR4Asm4eErlsvvbIvKEFjPI=
 =A6XK
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Various updates across wireless.

One thing to note: I've included a new ethertype
that wireless uses (ETH_P_PREAUTH) in if_ether.h.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 15:18:28 -05:00
David S. Miller ed04c46d4e Various fixes across the tree, the shortlog basically says it all:
cfg80211: fix cfg80211_beacon_dup
   -> old bug in this code
 
   cfg80211: clear wep keys after disconnection
   -> certain ways of disconnecting left the keys
 
   mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
   -> alignment issues with using 14 bytes
 
   mac80211: Do not disconnect on invalid operating class
   -> if the AP has a bogus operating class, let it be
 
   mac80211: Fix sending ADDBA response for an ongoing session
   -> don't send the same frame twice
 
   cfg80211: use only 1Mbps for basic rates in mesh
   -> interop issue with old versions of our code
 
   mac80211_hwsim: don't use WQ_MEM_RECLAIM
   -> it causes splats because it flushes work on a non-reclaim WQ
 
   regulatory: add NUL to request alpha2
   -> nla_put_string() issue from Kees
 
   mac80211: mesh: fix wrong mesh TTL offset calculation
   -> protocol issue
 
   mac80211: fix a possible leak of station stats
   -> error path might leak memory
 
   mac80211: fix calling sleeping function in atomic context
   -> percpu allocations need to be made with gfp flags
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlqPIu8ACgkQB8qZga/f
 l8R6ww/+NWuu2T3rXSqfp0hDI/CYCwpMV12wsD/4BGC+6idZBicwLVwNyey7Frzh
 IUb8vpuUR0+gvacY9ogSsBGBlU/IjydJWGpXiXIlruB/WNdMTHor9LZHr8dH2jDn
 m8rYwzOdpnp73IvME3krtvLv24NrJmOjBlkGTZ236403yRtYqX5k/bn/AriYSqMm
 bGbXTM9acs3WTygvR8KwCpOPjuosw3VL/54nu52MIegkORAHKA7SOm6O8PCjaG2Q
 4pRopztpvGAIQOe+VzYt8n47uW2a8g6FGQnRZOusAzf98xZLgfTBric5y5Vtf4j4
 WiSFnECCugoC0se8op5C5OgPmPEK7cN0j22PrJ0wJzd8cFuZSnw+MoHQuvvaH3WF
 4DtLNOs9uWyNqN3PJES6hhQJi1WXMKAV2GNOLsp/P2jmZya/TrHFiBH8nIAGqJhj
 3rARKmamI1qMUBs62fQfpXl+iOzLzKNIy6RzDr81Rh3Jhavx/xR7uJKIyy4xwQc0
 NfvBABT21WwI6+KC7EEyOqbti+Ldee3hd0fKift4Uww9j+P7c8UXTrWeGlq31M+v
 QSX8YstmBcDAk/llAwK/nM+9t1gXLBS9ZDv2M+ag7be0wZIORDlehsMBE987T3AB
 UrPgpxCM8Yrk10yHbpaq3sstZo9xWLGzrwhAUFIw2WzbWFDrd8A=
 =kwiY
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Various fixes across the tree, the shortlog basically says it all:

  cfg80211: fix cfg80211_beacon_dup
  -> old bug in this code

  cfg80211: clear wep keys after disconnection
  -> certain ways of disconnecting left the keys

  mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
  -> alignment issues with using 14 bytes

  mac80211: Do not disconnect on invalid operating class
  -> if the AP has a bogus operating class, let it be

  mac80211: Fix sending ADDBA response for an ongoing session
  -> don't send the same frame twice

  cfg80211: use only 1Mbps for basic rates in mesh
  -> interop issue with old versions of our code

  mac80211_hwsim: don't use WQ_MEM_RECLAIM
  -> it causes splats because it flushes work on a non-reclaim WQ

  regulatory: add NUL to request alpha2
  -> nla_put_string() issue from Kees

  mac80211: mesh: fix wrong mesh TTL offset calculation
  -> protocol issue

  mac80211: fix a possible leak of station stats
  -> error path might leak memory

  mac80211: fix calling sleeping function in atomic context
  -> percpu allocations need to be made with gfp flags
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 15:17:01 -05:00
Ilan Peer 94ba92713f mac80211: Call mgd_prep_tx before transmitting deauthentication
In multi channel scenarios, when disassociating from the AP before a
beacon was heard from the AP, it is not guaranteed that the virtual
interface is granted air time for the transmission of the
deauthentication frame. This in turn can lead to various issues as
the AP might never get the deauthentication frame.

To mitigate such possible issues, add a HW flag indicating that the
driver requires mac80211 to call the mgd_prep_tx() driver callback
to make sure that the virtual interface is granted immediate airtime
to be able to transmit the frame, in case that no beacon was heard
from the AP.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22 21:13:04 +01:00
Sara Sharon a1f2ba04cc mac80211: add get TID helper
Extracting the TID from the QOS header is common enough
to justify helper.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22 21:13:03 +01:00
Johannes Berg 7299d6f7bf mac80211: support reporting A-MPDU EOF bit value/known
Support getting the EOF bit value reported from hardware
and writing it out to radiotap.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22 21:13:02 +01:00
David Ahern 1fe4b1184c net: ipv4: Set addr_type in hash_keys for forwarded case
The result of the skb flow dissect is copied from keys to hash_keys to
ensure only the intended data is hashed. The original L4 hash patch
overlooked setting the addr_type for this case; add it.

Fixes: bf4e0a3db9 ("net: ipv4: add support for ECMP hash policy choice")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 14:30:51 -05:00
Eric Dumazet 350c9f484b tcp_bbr: better deal with suboptimal GSO
BBR uses tcp_tso_autosize() in an attempt to probe what would be the
burst sizes and to adjust cwnd in bbr_target_cwnd() with following
gold formula :

/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr->tso_segs_goal;

But GSO can be lacking or be constrained to very small
units (ip link set dev ... gso_max_segs 2)

What we really want is to have enough packets in flight so that both
GSO and GRO are efficient.

So in the case GSO is off or downgraded, we still want to have the same
number of packets in flight as if GSO/TSO was fully operational, so
that GRO can hopefully be working efficiently.

To fix this issue, we make tcp_tso_autosize() unaware of
sk->sk_gso_max_segs

Only tcp_tso_segs() has to enforce the gso_max_segs limit.

Tested:

ethtool -K eth0 tso off gso off
tc qd replace dev eth0 root pfifo_fast

Before patch:
for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
    691  (ss -temoi shows cwnd is stuck around 6 )
    667
    651
    631
    517

After patch :
# for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done
   1733 (ss -temoi shows cwnd is around 386 )
   1778
   1746
   1781
   1718

Fixes: 0f8782ea14 ("tcp_bbr: add BBR congestion control")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 14:15:23 -05:00
Jason A. Donenfeld b87b6194be netlink: put module reference if dump start fails
Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.

This patch expands the error path to simply call module_put if
cb->start() fails.

Fixes: 41c87425a1 ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22 14:01:38 -05:00
Arnd Bergmann a7dcdf6ea1 bpf: clean up unused-variable warning
The only user of this variable is inside of an #ifdef, causing
a warning without CONFIG_INET:

net/core/filter.c: In function '____bpf_sock_ops_cb_flags_set':
net/core/filter.c:3382:6: error: unused variable 'val' [-Werror=unused-variable]
  int val = argval & BPF_SOCK_OPS_ALL_CB_FLAGS;

This replaces the #ifdef with a nicer IS_ENABLED() check that
makes the code more readable and avoids the warning.

Fixes: b13d880721 ("bpf: Adds field bpf_sock_ops_cb_flags to tcp_sock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-22 01:11:20 +01:00
Donald Sharp cac56209a6 net: Allow a rule to track originating protocol
Allow a rule that is being added/deleted/modified or
dumped to contain the originating protocol's id.

The protocol is handled just like a routes originating
protocol is.  This is especially useful because there
is starting to be a plethora of different user space
programs adding rules.

Allow the vrf device to specify that the kernel is the originator
of the rule created for this device.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 17:49:24 -05:00
David S. Miller 943a0d4a9b Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains large batch with Netfilter fixes for
your net tree, mostly due to syzbot report fixups and pr_err()
ratelimiting, more specifically, they are:

1) Get rid of superfluous unnecessary check in x_tables before vmalloc(),
   we don't hit BUG there anymore, patch from Michal Hock, suggested by
   Andrew Morton.

2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang.

3) Drop socket lock that results in circular locking dependency, patch
   from Paolo Abeni.

4) Drop packet if case of malformed blob that makes backpointer jump
   in x_tables, from Florian Westphal.

5) Fix refcount leak due to race in ipt_CLUSTERIP in
   clusterip_config_find_get(), from Cong Wang.

6) Several patches to ratelimit pr_err() for x_tables since this can be
   a problem where CAP_NET_ADMIN semantics can protect us in untrusted
   namespace, from Florian Westphal.

7) Missing .gitignore update for new autogenerated asn1 state machine
   for the SNMP NAT helper, from Zhu Lingshan.

8) Missing timer initialization in xt_LED, from Paolo Abeni.

9) Do not allow negative port range in NAT, also from Paolo.

10) Lock imbalance in the xt_hashlimit rate match mode, patch from
    Eric Dumazet.

11) Initialize workqueue before timer in the idletimer match,
    from Eric Dumazet.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:49:55 -05:00
Eric Dumazet 98be9b1209 tcp: remove dead code after CHECKSUM_PARTIAL adoption
Since all skbs in write/rtx queues have CHECKSUM_PARTIAL,
we can remove dead code.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:14 -05:00
Eric Dumazet 4a64fd6ccf tcp: remove dead code from tcp_set_skb_tso_segs()
We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:14 -05:00
Eric Dumazet 65ec60973a tcp: tcp_sendmsg() only deals with CHECKSUM_PARTIAL
We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.

We can remove dead code in tcp_sendmsg().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:14 -05:00
Eric Dumazet dead7cdb0d tcp: remove sk_check_csum_caps()
Since TCP relies on GSO, we do not need this helper anymore.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:14 -05:00
Eric Dumazet 74d4a8f8d3 tcp: remove sk_can_gso() use
After previous commit, sk_can_gso() is always true.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:14 -05:00
Eric Dumazet 0a6b2a1dc2 tcp: switch to GSO being always on
Oleksandr Natalenko reported performance issues with BBR without FQ
packet scheduler that were root caused to lack of SG and GSO/TSO on
his configuration.

In this mode, TCP internal pacing has to setup a high resolution timer
for each MSS sent.

We could implement in TCP a strategy similar to the one adopted
in commit fefa569a9d ("net_sched: sch_fq: account for schedule/timers drifts")
or decide to finally switch TCP stack to a GSO only mode.

This has many benefits :

1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
   -> Lower ACK traffic
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works.
7) rtx rb-tree contains less packets, SACK is cheaper.

This patch implements the minimum patch, but we can remove some legacy
code as follow ups.

Tested:

On 40Gbit link, one netperf -t TCP_STREAM

BBR+fq:
sg on:  26 Gbits/sec
sg off: 15.7 Gbits/sec   (was 2.3 Gbit before patch)

BBR+pfifo_fast:
sg on:  24.2 Gbits/sec
sg off: 14.9 Gbits/sec  (was 0.66 Gbit before patch !!! )

BBR+fq_codel:
sg on:  24.4 Gbits/sec
sg off: 15 Gbits/sec  (was 0.66 Gbit before patch !!! )

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:24:13 -05:00
Gustavo A. R. Silva f905311356 rds: send: mark expected switch fall-through in rds_rm_size
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1465362 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by:  Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 14:18:18 -05:00
Eyal Birger ccc007e4a7 net: sched: add em_ipt ematch for calling xtables matches
The commit a new tc ematch for using netfilter xtable matches.

This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.

Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).

The module dynamically fetches the netfilter match module and calls
it using a fake xt_action_param structure based on validated userspace
provided parameters.

As the xt_policy match does not access skb->data, no skb modifications
are needed on match.

Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21 13:15:33 -05:00
Roman Kapl 5ae437ad5a net: sched: report if filter is too large to dump
So far, if the filter was too large to fit in the allocated skb, the
kernel did not return any error and stopped dumping. Modify the dumper
so that it returns -EMSGSIZE when a filter fails to dump and it is the
first filter in the skb. If we are not first, we will get a next chance
with more room.

I understand this is pretty near to being an API change, but the
original design (silent truncation) can be considered a bug.

Note: The error case can happen pretty easily if you create a filter
with 32 actions and have 4kb pages. Also recent versions of iproute try
to be clever with their buffer allocation size, which in turn leads to

Signed-off-by: Roman Kapl <code@rkapl.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 21:57:17 -05:00
Antonio Cardace 3fef2b6290 x25: use %*ph to print small buffer
Use %*ph format to print small buffer as hex string.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antonio Cardace <anto.cardace@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 13:51:47 -05:00
Arkadi Sharshevsky cc944ead83 devlink: Move size validation to core
Currently the size validation is done via a cb, which is unneeded. The
size validation can be moved to core. The next patch will perform cleanup.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 13:38:53 -05:00
Kirill Tkhai 8349efd903 net: Queue net_cleanup_work only if there is first net added
When llist_add() returns false, cleanup_net() hasn't made its
llist_del_all(), while the work has already been scheduled
by the first queuer. So, we may skip queue_work() in this case.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 13:23:49 -05:00
Kirill Tkhai 65b7b5b90f net: Make cleanup_list and net::cleanup_list of llist type
This simplifies cleanup queueing and makes cleanup lists
to use llist primitives. Since llist has its own cmpxchg()
ordering, cleanup_list_lock is not more need.

Also, struct llist_node is smaller, than struct list_head,
so we save some bytes in struct net with this patch.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 13:23:27 -05:00
Kirill Tkhai 19efbd93e6 net: Kill net_mutex
We take net_mutex, when there are !async pernet_operations
registered, and read locking of net_sem is not enough. But
we may get rid of taking the mutex, and just change the logic
to write lock net_sem in such cases. This obviously reduces
the number of lock operations, we do.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20 13:23:13 -05:00
David S. Miller f5c0c6f429 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-02-19 18:46:11 -05:00
Linus Torvalds 79c0ef3e85 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Prevent index integer overflow in ptr_ring, from Jason Wang.

 2) Program mvpp2 multicast filter properly, from Mikulas Patocka.

 3) The bridge brport attribute file is write only and doesn't have a
    ->show() method, don't blindly invoke it. From Xin Long.

 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.

 5) Fix multiple definition issue with if_ether.h UAPI header, from
    Hauke Mehrtens.

 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
    Varadhan.

 7) Revert XDP redirect support from thunderx driver, it is not
    implemented properly. From Jesper Dangaard Brouer.

 8) Fix missing RTNL protection across some tipc operations, from Ying
    Xue.

 9) Return the correct IV bytes in the TLS getsockopt code, from Boris
    Pismenny.

10) Take tclassid into consideration properly when doing FIB rule
    matching. From Stefano Brivio.

11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.

12) TUN driver doesn't align frags properly, and we can end up doing
    unaligned atomics on misaligned metadata. From Eric Dumazet.

13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
    Subash Abhinov Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  tg3: APE heartbeat changes
  mlxsw: spectrum_router: Do not unconditionally clear route offload indication
  net: qualcomm: rmnet: Fix possible null dereference in command processing
  net: qualcomm: rmnet: Fix warning seen with 64 bit stats
  net: qualcomm: rmnet: Fix crash on real dev unregistration
  sctp: remove the left unnecessary check for chunk in sctp_renege_events
  rxrpc: Work around usercopy check
  tun: fix tun_napi_alloc_frags() frag allocator
  udplite: fix partial checksum initialization
  skbuff: Fix comment mis-spelling.
  dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
  PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
  cxgb4: fix trailing zero in CIM LA dump
  cxgb4: free up resources of pf 0-3
  fib_semantics: Don't match route with mismatching tclassid
  NFC: llcp: Limit size of SDP URI
  tls: getsockopt return record sequence number
  tls: reset the crypto info if copy_from_user fails
  tls: retrun the correct IV in getsockopt
  docs: segmentation-offloads.txt: add SCTP info
  ...
2018-02-19 11:58:19 -08:00
Paolo Abeni 26736a08ee tipc: don't call sock_release() in atomic context
syzbot reported a scheduling while atomic issue at netns
destruction time:

BUG: sleeping function called from invalid context at net/core/sock.c:2769
in_atomic(): 1, irqs_disabled(): 0, pid: 85, name: kworker/u4:3
5 locks held by kworker/u4:3/85:
  #0:  ((wq_completion)"%s""netns"){+.+.}, at: [<00000000c9792deb>]
process_one_work+0xaaf/0x1af0 kernel/workqueue.c:2084
  #1:  (net_cleanup_work){+.+.}, at: [<00000000adc12e2a>]
process_one_work+0xb01/0x1af0 kernel/workqueue.c:2088
  #2:  (net_sem){++++}, at: [<000000009ccb5669>] cleanup_net+0x23f/0xd20
net/core/net_namespace.c:494
  #3:  (net_mutex){+.+.}, at: [<00000000a92767d9>] cleanup_net+0xa7d/0xd20
net/core/net_namespace.c:496
  #4:  (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
spin_lock_bh include/linux/spinlock.h:315 [inline]
  #4:  (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
tipc_topsrv_stop+0x231/0x610 net/tipc/topsrv.c:685
CPU: 0 PID: 85 Comm: kworker/u4:3 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6128
  __might_sleep+0x95/0x190 kernel/sched/core.c:6081
  lock_sock_nested+0x37/0x110 net/core/sock.c:2769
  lock_sock include/net/sock.h:1463 [inline]
  tipc_release+0x103/0xff0 net/tipc/socket.c:572
  sock_release+0x8d/0x1e0 net/socket.c:594
  tipc_topsrv_stop+0x3c0/0x610 net/tipc/topsrv.c:696
  tipc_exit_net+0x15/0x40 net/tipc/core.c:96
  ops_exit_list.isra.6+0xae/0x150 net/core/net_namespace.c:148
  cleanup_net+0x6ba/0xd20 net/core/net_namespace.c:529
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429

This is caused by tipc_topsrv_stop() releasing the listener socket
with the idr lock held. This changeset addresses the issue moving
the release operation outside such lock.

Reported-and-tested-by: syzbot+749d9d87c294c00ca856@syzkaller.appspotmail.com
Fixes: 0ef897be12 ("tipc: separate topology server listener socket from subcsriber sockets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by:  ///jon
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:38:50 -05:00
Jon Maloy 96c252bf1c tipc: fix bug on error path in tipc_topsrv_kern_subscr()
In commit cc1ea9ffadf7 ("tipc: eliminate struct tipc_subscriber") we
re-introduced an old bug on the error path in the function
tipc_topsrv_kern_subscr(). We now re-introduce the correction too.

Reported-by: syzbot+f62e0f2a0ef578703946@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:38:08 -05:00
Kirill Tkhai da349fad80 net: Convert iptable_filter_net_ops
These pernet_operations register and unregister
net::ipv4.iptable_filter table. Since there are
no packets in-flight at the time of exit method
is working, iptables rules should not be touched.
Also, pernet_operations should not send ipv4
packets each other. So, it's safe to mark them
async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:12 -05:00
Kirill Tkhai 4d6b80762b net: Convert ip_tables_net_ops, udplite6_net_ops and xt_net_ops
ip_tables_net_ops and udplite6_net_ops create and destroy /proc entries.
xt_net_ops does nothing.

So, we are able to mark them async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:12 -05:00
Kirill Tkhai 5fc094f5b8 net: Convert ip6_frags_ops
Exit methods calls inet_frags_exit_net() with global ip6_frags
as argument. So, after we make the pernet_operations async,
a pair of exit methods may be called to iterate this hash table.
Since there is inet_frag_worker(), which already may work
in parallel with inet_frags_exit_net(), and it can make the same
cleanup, that inet_frags_exit_net() does, it's safe. So we may
mark these pernet_operations as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai d16784d9fb net: Convert fib6_net_ops, ipv6_addr_label_ops and ip6_segments_ops
These pernet_operations register and unregister tables
and lists for packets forwarding. All of the entities
are per-net. Init methods makes simple initializations,
and since net is not visible for foreigners at the time
it is working, it can't race with anything. Exit method
is executed when there are only local devices, and there
mustn't be packets in-flight. Also, it looks like no one
pernet_operations want to send ipv6 packets to foreign
net. The same reasons are for ipv6_addr_label_ops and
ip6_segments_ops. So, we are able to mark all them as
async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai b489141369 net: Convert xfrm6_net_ops
These pernet_operations create sysctl tables and
initialize net::xfrm.xfrm6_dst_ops used for routing.
It doesn't look like another pernet_operations send
ipv6 packets to foreign net namespaces, so it should
be safe to mark the pernet_operations as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai a7852a76f4 net: Convert ip6_flowlabel_net_ops
These pernet_operations create and destroy /proc entries.
ip6_fl_purge() makes almost the same actions as timer
ip6_fl_gc_timer does, and as it can be executed in parallel
with ip6_fl_purge(), two parallel ip6_fl_purge() may be
executed. So, we can mark it async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai ac34cb6c0c net: Convert ping_v6_net_ops
These pernet_operations only register and unregister /proc
entries, so it's possible to mark them async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai 58708caef5 net: Convert ipv6_sysctl_net_ops
These pernet_operations create and destroy sysctl tables.
They are not touched by another net pernet_operations.
So, it's possible to execute them in parallel with others.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:11 -05:00
Kirill Tkhai fef65a2c6c net: Convert tcpv6_net_ops
These pernet_operations create and destroy net::ipv6.tcp_sk
socket, which is used in tcp_v6_send_response() only. It looks
like foreign pernet_operations don't want to set ipv6 connection
inside destroyed net, so this socket may be created in destroyed
in parallel with anything else. inet_twsk_purge() is also safe
for that, as described in patch for tcp_sk_ops. So, it's possible
to mark them as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Kirill Tkhai 7b7dd180b8 net: Convert fib6_rules_net_ops
These pernet_operations register and unregister
net::ipv6.fib6_rules_ops, which are used for
routing. It looks like there are no pernet_operations,
which send ipv6 packages to another net, so we
are able to mark them as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Kirill Tkhai 85ca51b2a2 net: Convert ipv6_inetpeer_ops
net->ipv6.peers is dereferenced in three places via inet_getpeer_v6(),
and it's used to handle skb. All the users of inet_getpeer_v6() do not
look like be able to be called from foreign net pernet_operations, so
we may mark them as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Kirill Tkhai 509114112d net: Convert raw6_net_ops, udplite6_net_ops, ipv6_proc_ops, if6_proc_net_ops and ip6_route_net_late_ops
These pernet_operations create and destroy /proc entries
and safely may be converted and safely may be mark as async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Kirill Tkhai 1a2e93329d net: Convert icmpv6_sk_ops, ndisc_net_ops and igmp6_net_ops
These pernet_operations create and destroy net::ipv6.icmp_sk
socket, used to send ICMP or error reply.

Nobody can dereference the socket to handle a packet before
net is initialized, as there is no routing; nobody can do
that in parallel with exit, as all of devices are moved
to init_net or destroyed and there are no packets it-flight.
So, it's possible to mark these pernet_operations as async.

The same for ndisc_net_ops and for igmp6_net_ops. The last
one also creates and destroys /proc entries.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00
Kirill Tkhai b01a59a488 net: Convert ip6mr_net_ops
These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19 14:19:10 -05:00