drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
This patch will work as workaround for silicon limitation
related to PWM dutycycle when the backlight level goes to 0.
Actually PWM value is 16 bit value and valid range from 1-65535.
when ever user requested to set this PWM value to 0 which is not
fall in the range, in VBIOS taken care this by limiting to 1.
This patch here will do the same. Either driver or VBIOS can not
pass 0 value as it is not a valid range for PWM and it will
give a high PWM pulse which is not the intended behaviour as
per HW constraints.
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
from AI, SMU Ip is not indispensable to driver and can be
disabled by user via module parameter ip_block_mask.
so the pp_handle may be NULL.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[WHY] dp debugfs file does not exist for eDP under
/sys/kernel/debug/dri/0/eDP-1. the root is phy debugfs
is created for dp connector only.
[HOW] for eDP connector, create phy debugfs too.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_dm_commit_tail(), wait until flip_done() is signaled before
we signal hw_done().
[Why]
This is to temporarily address a paging error that occurs when a
nonblocking commit contends with another commit, particularly in a
mirrored display configuration where at least 2 CRTCs are updated.
The error occurs in drm_atomic_helper_wait_for_flip_done(), when we
attempt to access the contents of new_crtc_state->commit.
Here's the sequence for a mirrored 2 display setup (irrelevant steps
left out for clarity):
**THREAD 1** | **THREAD 2**
|
Initialize atomic state for flip |
|
Queue worker |
...
| Do work for flip
|
| Signal hw_done() on CRTC 1
| Signal hw_done() on CRTC 2
|
| Wait for flip_done() on CRTC 1
<---- **PREEMPTED BY THREAD 1**
Initialize atomic state for cursor |
update (1) |
|
Do cursor update work on both CRTCs |
|
Clear atomic state (2) |
**DONE** |
...
|
| Wait for flip_done() on CRTC 2
| *ERROR*
|
The issue starts with (1). When the atomic state is initialized, the
current CRTC states are duplicated to be the new_crtc_states, and
referenced to be the old_crtc_states. (The new_crtc_states are to be
filled with update data.)
Some things to note:
* Due to the mirrored configuration, the cursor updates on both CRTCs.
* At this point, the pflip IRQ has already been handled, and flip_done
signaled on all CRTCs. The cursor commit can therefore continue.
* The old_crtc_states used by the cursor update are the **same states**
as the new_crtc_states used by the flip worker.
At (2), the old_crtc_state is freed (*), and the cursor commit
completes. We then context switch back to the flip worker, where we
attempt to access the new_crtc_state->commit object. This is
problematic, as this state has already been freed.
(*) Technically, 'state->crtcs[i].state' is freed, which was made to
reference old_crtc_state in drm_atomic_helper_swap_state()
[How]
By moving hw_done() after wait_for_flip_done(), we're guaranteed that
the new_crtc_state (from the flip worker's perspective) still exists.
This is because any other commit will be blocked, waiting for the
hw_done() signal.
Note that both the i915 and imx drivers have this sequence flipped
already, masking this problem.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is no reason why the common data needs to be kept separate.
[How]
Flatten the struct by moving common data into the DM IRQ struct.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For atomic driver this is the default, no need to reimplement it. We
still need to keep the copypasta for not-atomic drivers though, since
no one polished the legacy crtc helpers as much as the atomic ones.
v2: amdgpu uses ->best_encoder internally, give it a local copy. It
might be a good idea to merge the connector and encoder into one
amdgpu_dm_sink structure, that might match DC internals better. At
least for non-DPMST outputs. Kudos to Ville for spotting this.
v3: Rebase onto a487411a64 ("drm/amd/display: Use DRM helper for
best_encoder").
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Tony Cheng <Tony.Cheng@amd.com>
Cc: "Leo (Sunpeng) Li" <sunpeng.li@amd.com>
Cc: Shirish S <shirish.s@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-2-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----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=dMl4
-----END PGP SIGNATURE-----
BackMerge v4.19-rc6 into drm-next
I have some pulls based on rc6, and I prefer to have an explicit backmerge.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[Why]
EDID emulation didn't work properly for linux, as we stop programming
if nothing is connected physically.
[How]
We get a flag from DRM when we want to do edid emulation. We check if
this flag is true and nothing is connected physically, if so we only
program the front end using VIRTUAL_SIGNAL.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything that isn't related to the IH ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The work struct's schedule call was removed a while ago, making this
useless.
[How]
Remove it.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During suspend under some hardware configurations can result in a
series of atomic commits with a NULL stream status - which
causes a NULL pointer dereference. This should be guarded.
[How]
Exit early from the function - if we can't access the stream then
there isn't anything that can be done here.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Parse the native color bit and send it to freesync module for future
use
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "drm/amd/display: Remove call to amdgpu_pm_compute_clocks"
This reverts commit dcd473770e86517543691bdb227103d6c781cd0a.
when display configuration changes, dc need to update the changes
to powerplay, also need to trigger a power state task.
amdgpu_pm_compute_clocks is the interface to set power state task
either dpm enabled or powerplay enabled
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is a new pull for drm-next on top of last weeks with the following
changes:
- Fixed 64 bit divide
- Fixed vram type on vega20
- Misc vega20 fixes
- Misc DC fixes
- Fix GDS/GWS/OA domain handling
Previous changes from last week:
amdgpu/kfd:
- Picasso (new APU) support
- Raven2 (new APU) support
- Vega20 enablement
- ACP powergating improvements
- Add ABGR/XBGR display support
- VCN JPEG engine support
- Initial xGMI support
- Use load balancing for engine scheduling
- Lots of new documentation
- Rework and clean up i2c and aux handling in DC
- Add DP YCbCr 4:2:0 support in DC
- Add DMCU firmware loading for Raven (used for ABM and PSR)
- New debugfs features in DC
- LVDS support in DC
- Implement wave kill for gfx/compute (light weight reset for shaders)
- Use AGP aperture to avoid gart mappings when possible
- GPUVM performance improvements
- Bulk moves for more efficient GPUVM LRU handling
- Merge amdgpu and amdkfd into one module
- Enable gfxoff and stutter mode on Raven
- Misc cleanups
Scheduler:
- Load balancing support
- Bug fixes
ttm:
- Bulk move functionality
- Bug fixes
radeon:
- Misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com
[Why]
It's not being used
[How]
Nuke it
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
It's not being used anymore.
[How]
Nuke it
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read the version number from the common firmware header and store
it in the dm struct
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for picasso to the display manager.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem:
After GPU reset pflip completion IRQ is disabled and hence
any subsequent mode set or plane update leads to hang.
Fix:
Unless acrtc->otg_inst is initialized to -1 during display
block initializtion then durng resume from GPU reset
amdgpu_irq_gpu_reset_resume_helper will override CRTC 0 pflip
IRQ value with whatever value was on every other unused CRTC because
dm_irq_state will do irq_source = dal_irq_type + acrtc->otg_inst
where acrtc->otg_inst will be 0 for every unused CRTC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c:771:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: e498eb7136 ("drm/amd/display: Add support for hw_state logging via debugfs")
CC: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMCU (Display Microcontroller Unit) is a GPU chip involved in
eDP features like Adaptive Backlight Modulation and Panel Self
Refresh.
DC is already fully equipped to initialize DMCU as long as the
firmware is loaded.
At the moment only the raven firmware is available.
A single .bin file is loaded by the kernel's loading mechanism
and split into two ucodes according to the header.
DMCU is optional, so if the firmware is not found, no error or
warning is raised.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The extraneous call to amdgpu_pm_compute_clocks is deprecated.
[How]
Remove it.
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Our implementation is functionally identical to DRM's
Note that instead of checking if the provided id is 0, the helper
follows through with the mode object search. However, It will still
return NULL, since 0 is not a valid object id, and missed searches
will return NULL.
[How]
Remove our implementation, and replace it with
drm_atomic_helper_best_encoder.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We currently lock modeset by setting a boolean in dm. We want to lock
Based on what DC tells us.
[How]
Build stream_updates and plane_update based on what changed. Then we
call check_update_surfaces_for_stream() to get the update type
We lock only if update_type is not fast
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Logging hardware state can be done by triggering a write to the
debugfs file. It would also be useful to be able to read the hardware
state from the debugfs file to be able to generate a clean log without
timestamps.
[How]
Usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
Threading is an obvious concern when dealing with multiple debugfs
operations and blocking on global state in dm or dc seems unfavorable.
Adding an extra parameter for the debugfs log context state is the
implementation done here. Existing code that made use of DTN_INFO
and its associated macros needed to be refactored to support this.
We don't know the size of the log in advance so it reallocates the
log string dynamically. Once the log has been generated it's copied
into the user supplied buffer for the debugfs. This allows for seeking
support but it's worth nothing that unlike triggering output via
dmesg the hardware state might change in-between reads if your buffer
size is too small.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Good spelling and grammar makes comments
more pleasant and clearer.
Linux has coding standards for comments
that we should try to follow.
[How]
Fix obvious spelling and grammar issues
Ensure all comments use '/*' and '*/' and multi-line comments
follow linux convention
Remove line-of-stars comments that do not separate sections
of code and comments referring to lines of code that have
since been removed
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We have logging methods for printing hardware state for newer ASICs
but no way to trigger the log output.
[How]
Add support for triggering the output via writing to a debugfs file
entry. Log output currently goes into dmesg for convenience, but
accessing via a read should be possible later.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jordan Lazare <Jordan.Lazare@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
drm_handle_vblank is deprecated. Use drm_crtc_handle_vblank instead.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds support for LVDS displays.
v2: add support for spread spectrum, sink detect
v3: clean up enable_lvds_output
v4: fix up link_detect
v5: remove assert on 888 format
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
I2C code did not match dc resource model and was generally
unpleasant
[How]
Move code into new svelte dce_i2c files, replacing various i2c
objects with two structs: dce_i2c_sw and dce_i2c_hw. Fully split
sw and hw code paths. Remove all redundant declarations. Use
address lists to distinguish between versions. Change dce80 code
to newer register access macros.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove dependency on internal sink map and instead
use existing stream and plane state
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add code to tear down freesync modules when disabled.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SURFACE_PIXEL_FORMAT_GRPH_ABGR8888 is supported in amd/display/dc/dc_hw_types.h
and the necessary crossbars register controls to swap red and blue channels
are already implemented in drm/amd/display/dc/dce/dce_mem_input.c
(v4) Logic to handle new formats is added only in amdgpu_dm module.
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Optimize gamma programming
[How]
Use ROM for optimization when it is possible.
Use RAM only when it is necessary.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In case if edid is null or corrupted we need to manually add
a single failsafe mode (640x480). If zero modes returned
DRM adds a different failsafe mode that is not accepted by
DP 1.2 compliance test
[how]
Return the number of modes manually added
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Legacy IRI style is not linux friendly.
[how]
New function pointer call
semantics will be used for all future PPLIB/DAL interfaces, and also
some existing will be refactored. This change defines how the
new function pointer structures will look, as well as implements
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used wrong pp interface, the original interface is
exposed by dpm on SI and paritial CI.
Pointed out by Francis David <david.francis@amd.com>
v2: dal only need to set min_dcefclk and min_fclk to smu.
so use display_clock_voltage_request interface,
instand of update all display configuration.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Used wrong pp interface, the original interface is
exposed by dpm on SI and paritial CI.
Pointed out by Francis David <david.francis@amd.com>
v2: dal only need to set min_dcefclk and min_fclk to smu.
so use display_clock_voltage_request interface,
instand of update all display configuration.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch make changes to allocate crc-entries buffer before
enabling CRC generation.
It moves all the failure check early in the function before setting
the source or memory allocation.
Now set_crc_source takes only two variable inputs, values_cnt we
already gets as part of verify_crc_source.
Changes since V1:
- refactor code to use single spin lock
Changes since V2:
- rebase
Changes since V3:
- rebase on top of VKMS driver
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Leo Li <sunpeng.li@amd.com> (V2)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (V3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-3-mahesh1.kumar@intel.com
This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0.
We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A null pointer deference can occur if crtc is null in
amdgpu_dm_crtc_handle_crc_irq. This can happen if get_crtc_by_otg_inst
returns NULL during dm_crtc_high_irq, leading to a hang in some IGT
test cases.
[How]
Check that CRTC is non-null before accessing its fields.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maarten Lankhorst