When doing a manual bisect, a build can fail or a test can be inconclusive.
In these cases it would be helpful to be able to skip the test entirely.
Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a way to run a patchcheck test on the commits that are in one branch
but not in another. This uses git cherry to find a list of commits to
test each one with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All builtins that consume events from perf's ring buffer now end up
calling perf_evlist__mmap_consume(), which will allow unmapping the ring
buffer when all the fds gets closed and all events in the buffer
consumed.
This is in preparation for the patchkit that will notice POLLHUP on
perf events file descriptors.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8vhaeeoq11ppz0713el4xcps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not use dwfl_module_addrsym if dwarf_diename can find the symbol
name, since dwfl_module_addrsym can be failed on shared libraries.
Without this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Failed to find symbol at 0x11df1
Failed to find the address of create_arg_op
Error: Failed to show vars.
----
With this patch
----
$ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op
Available variables at create_arg_op
@<create_arg_op+0>
enum filter_op_type btype
struct filter_arg* arg
----
This bug was reported on linux-perf-users@vger.kernel.org.
Reported-by: david lerner <dlernerdroid@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691
Link: http://lkml.kernel.org/r/20140917084101.3722.25299.stgit@kbuild-f20.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not access kallsyms to show available variables and show source lines
in user binaries.
This behavior always requires the root privilege when sysctl sets
kernel.kptr_restrict=1, but we don't need it just for analyzing user
binaries.
Without this patch (by normal user, kptr_restrict=1):
----
$ perf probe -x ./perf -V add_cmdname
Failed to init vmlinux path.
Error: Failed to show vars.
$ perf probe -x ./perf -L add_cmdname
Failed to init vmlinux path.
Error: Failed to show lines.
----
With this patch:
----
$ perf probe -x ./perf -V add_cmdname
Available variables at add_cmdname
@<perf_unknown_cmd_config+144>
(No matched variables)
@<list_commands_in_dir+160>
(No matched variables)
@<add_cmdname+0>
char* name
size_t len
struct cmdnames* cmds
$ perf probe -x ./perf -L add_cmdname
<add_cmdname@/home/fedora/ksrc/linux-3/tools/perf/util/help.c:0>
0 void add_cmdname(struct cmdnames *cmds, const char *name, size_t len)
1 {
2 struct cmdname *ent = malloc(sizeof(*ent) + len + 1);
4 ent->len = len;
5 memcpy(ent->name, name, len);
6 ent->name[len] = 0;
...
----
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: david lerner <dlernerdroid@gmail.com>
Cc: linux-perf-user@vger.kernel.org
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140917084054.3722.73975.stgit@kbuild-f20.novalocal
[ Added missing 'bool user' argument to the !DWARF show_line_range() stub ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ubuntu places the kernel debuginfo in /usr/lib/debug/boot/vmlinux-*
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/r/20140909091152.2698c0f7@kryten
[ Adapted it to use the perf.data file kernel version as in 0a7e6d1b68 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a vmlinux is stripped, perf will use it and ignore kallsyms. We
end up with useless profiles where everything maps to a few
runtime symbols:
63.39% swapper [kernel.kallsyms] [k] hcall_real_table
4.90% beam.smp [kernel.kallsyms] [k] hcall_real_table
4.44% beam.smp [kernel.kallsyms] [k] __sched_text_start
3.72% beam.smp [kernel.kallsyms] [k] __run_at_kexec
Detect this case and fallback to using kallsyms. This fixes the issue:
62.81% swapper [kernel.kallsyms] [k] snooze_loop
4.44% beam.smp [kernel.kallsyms] [k] __schedule
0.91% beam.smp [kernel.kallsyms] [k] _switch
0.73% beam.smp [kernel.kallsyms] [k] put_prev_entity
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140909085929.4a5a81f0@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
_BSD_SOURCE was deprecated in favour of _DEFAULT_SOURCE since glibc
2.20[1]. To avoid build warning on glibc2.20, _DEFAULT_SOURCE should
also be defined.
[1]: https://sourceware.org/glibc/wiki/Release/2.20
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1410487817-13403-1-git-send-email-chanho61.park@samsung.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Include poll.h instead.
Fixes the following warning in systems with musl's libc:
/usr/include/sys/poll.h:1:2: warning: #warning redirecting incorrect #include
<sys/poll.h> to <poll.h> [-Wcpp]
Reported-by: John Spencer <maillist-linux@barfooze.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1687/focus=1690
Link: http://lkml.kernel.org/n/tip-k4ocrq1de3fk146oevy346bi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes it work with non-GNU grep's as well.
Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1686
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some Linux symbols (for example __vt_event_wait) are interpreted by the
demangler as C++ mangled names, which of course they aren't.
Disable kernel symbol demangling by default to avoid this, and allow
enabling it with a new option --demangle-kernel for those who wish it.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1410581705-26968-1-git-send-email-avi@cloudius-systems.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes ARM compile of the perf tool. The debug.h header file
was missing from a couple of unwind related modules.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140905042103.GA3091@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to scan a sysfs file within the pmu device directory.
This will be used to read capability values from the PMU 'caps'
subdirectory.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This allows default config terms to be provided for a PMU. So, for
example, when the Intel PT PMU is added, it will be possible to specify:
intel_pt//
which will be the same as:
intel_pt/tsc=1,noretcomp=0/
meaning that the trace should contain TSC timestamps and perform 'return
compression'.
An important consideration of this patch is that it must be possible to
overwrite the default values. That has meant changing the logic so that
a zero value can replace a non-zero value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Decoding an Intel PT trace of the kernel requires an accurate kernel
object image. This is provided by making a copy of kcore. However the
copy needs to be made under the same conditions as the original
recording, and then it needs to be associated with the perf.data file.
The perf-with-kcore script does that.
The script also checks the permissions on the buildid cache and can be
used to fix them. That is needed for distributions where root does not
have a home directory and consequently writes to the same buildid cache
as the user, resulting in cached files that the user does not have
access to.
Example:
$ ./perf-with-kcore
Usage: perf-with-kcore <perf sub-command> <perf.data directory> [<sub-command options> [ -- <workload>]]
<perf sub-command> can be record, script, report or inject
or: perf-with-kcore fix_buildid_cache_permissions
$ ./perf-with-kcore record pt_uname -e intel_pt// -- uname
Recording
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf record -o pt_uname/perf.data -e intel_pt// -- uname
Linux
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.023 MB pt_uname/perf.data ]
Copying kcore
[sudo] password for ahunter:
Done
$ tools/perf/perf-with-kcore.sh script pt_uname | head
Using /home/ahunter/bin/perf
perf version 3.15.rc3.g4549ba
/home/ahunter/bin/perf script -i pt_uname/perf.data --kallsyms=pt_uname/kcore_dir/kallsyms
swapper 0 [002] 161533.969666: sched:sched_switch: swapper/2:0 [120] R ==> perf:11316 [120]
:11315 11315 [003] 161533.969704: sched:sched_switch: perf:11315 [120] S ==> swapper/3:0 [120]
:11316 11316 [002] 161533.969783: sched:sched_switch: perf:11316 [120] R ==> migration/2:33 [0]
:33 33 [002] 161533.969791: sched:sched_switch: migration/2:33 [0] S ==> swapper/2:0 [120]
swapper 0 [003] 161533.969792: sched:sched_switch: swapper/3:0 [120] R ==> perf:11316 [120]
:11316 11316 [003] 161533.970062: branches: 0 [unknown] ([unknown]) => ffffffff810532fa native_write_msr_safe ([kernel.kallsyms])
:11316 11316 [003] 161533.970062: branches: ffffffff810532fd native_write_msr_safe ([kernel.kallsyms]) => ffffffff81035b31 pt_config_start ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This enables a PMU event to be specified in the form:
pmu//
which is effectively the same as:
pmu/config=0/
This patch is a precursor to defining default config for a PMU.
Further explanation extracted from lkml thread:
Imagine that the 'tsc' term did not exist.
Intel PT trace data would not contain TSC packets, and the decoder would
not know how to decode them.
Then imagine that a new version of the hardware adds 'tsc'.
It is such a useful feature that we want it by default, but older
versions of the tools don't know how to decode it, so the kernel cannot
turn it on by default.
It is similar to why the kernel does not select perf_event_attr.mmap2 by
default.
The kernel doesn't know whether the tool supports it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need a way to specify $(lib) part of the installation path for
traceevent plugin libraries. Currently we use 'lib64' for x86_64 and
'lib' otherwise.
Instead of listing all possible values, this change allows the rpm spec
code to specify the correct $(lib) part based on processed architecture,
like
$ make ... lib=%{_lib}
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408978552-17131-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'live' command prints additional information to the "Analyze events
for " title bar about the current target. Let's print the same title
for the 'report' command.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf kvm stat report' command can be used to analyze events either
for system wide or for specific pids.
Let's enable kvm->opts.target.system_wide flag when 'report' command is
running for system-wide analyzing. This helps to sync kvm->opts.target
values in 'report' and 'live' commands.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf kvm stat report' command uses the kvm->pid_str field to keep
the value of the --pid option. Let's use kvm->opts.target.pid instead.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1409579095-12963-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The powerpc skip callchain code uses DWARF, so we must disable it if
DWARF is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140825182506.2be6512d@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit changes rcutorture_runnable to torture_runnable, which is
consistent with the names of the other parameters and is a bit shorter
as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although the test cases have been added, they must be specified explicitly
via the kvm.sh --configs argument in order to run them. This commit
therefore adds the RCU-tasks tests to the CFLIST so that they will be
run automatically by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUDOW+AAoJEHm+PkMAQRiGOXYH/00TPKm8PdM5cXXG2YYYv9eT
W99K7KD2i0/qiVtlGgjjvB7fO3K0HcZusTd2jmVd8IWntXvauq7Zpw5YZkjwu4KX
Y1HCwwCd2aw0FoqgrJhNP3+j5Cr1BD/HLtbffjCe+A3tppOIis4Bwt2wJOoYlXpS
hU9Jxxc4lcRo8YKbffouDo7PIneWeJy8N+WGpUR5BfJIEK0ZZtCUqn3/3WLX4FYu
fE6uiF/bACTpKXU/mo4dDbhZp439H/QdwQc9B0F8+8CBDMXKaNHrPV7kN36T2SWa
fD4boikTsi/yh9Ks1fvHbvNq2N0ihoMnja+vLRyvjAcAQv2fKG3OZtYgFWSdghU=
=Xknd
-----END PGP SIGNATURE-----
Merge tag 'v3.17-rc4' into next
Merge Linux 3.17-rc4 here so we have all the latest
fixes on next too. This also cleans up a few conflicts
when applying patches.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Conflicts:
drivers/usb/gadget/Makefile
drivers/usb/gadget/function/Makefile
drivers/usb/gadget/legacy/Makefile
drivers/usb/phy/phy-samsung-usb.h
This commit adds the TASKS01 and TASKS02 Kconfig fragments, along with
the corresponding TASKS01.boot and TASKS02.boot boot-parameter files
specifying that rcutorture test RCU-tasks instead of the default flavor.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When starting a new torture run while an old one is still running, both
qemu processes can be outputting to the same console.out file. This can
cause quite a bit of confusion, so this commit checks for this situation,
which is normally indicated by nul bytes in the console output. Yes,
if your new run uses up an exact number of blocks of the file, this
check will be ineffective, but the odds are not bad.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit specifies offstack cpumasks in TREE07 in order to catch
references to unallocated cpumask_var_t variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers. This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The current set of tests covers only cases where either all possible CPUs
are nohz_full= CPUs or none of them are. Because there have been some
recent bug escapes in cases where only some of the CPUs are nohz_full=
CPUs, this commit add a configuration where only half of the CPUs are
nohz_full= CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit tries to get people into the correct directory before
creating the initrd directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh. Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.
This commit changes all such uses to use bash explicitly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Fixes: 588b48caf6 ("usbip: move usbip userspace code out of staging")
which introduced build failure by not changing uapi/usbip.h include path
according to new location.
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This test currently fails on 32-bit systems since we use u64 type to pass the
flags to fcntl.
This commit changes this to use 'unsigned int' type for flags to fcntl making it
work on 32-bit systems.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If ffs-test is used with a kernel prior to 3.14, which do not
support the new descriptors format, it will fail when trying to
write the descriptors. Add a function that converts the new
descriptors to the legacy ones and use it to retry writing the
descriptors using the legacy format.
Also add “-l” flag to ffs-test which will cause the tool to
never try the new format and instead immediatelly try the
legacy one. This should be useful to test whether parsing
of the old format still works on given 3.14+ kernel.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Since commit [ac8dde11: “Add flags to descriptors block”] functionfs
supports a new, more powerful and extensible, descriptor format.
Since ffs-test is probably the first thing users of the functionfs
interface see when they start writing functionfs user space daemons,
convert it to use the new format thus promoting it.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Merge patches from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
kexec: purgatory: add clean-up for purgatory directory
Documentation/kdump/kdump.txt: add ARM description
flush_icache_range: export symbol to fix build errors
tools: selftests: fix build issue with make kselftests target
ocfs2: quorum: add a log for node not fenced
ocfs2: o2net: set tcp user timeout to max value
ocfs2: o2net: don't shutdown connection when idle timeout
ocfs2: do not write error flag to user structure we cannot copy from/to
x86/purgatory: use approprate -m64/-32 build flag for arch/x86/purgatory
drivers/rtc/rtc-s5m.c: re-add support for devices without irq specified
xattr: fix check for simultaneous glibc header inclusion
kexec: remove CONFIG_KEXEC dependency on crypto
kexec: create a new config option CONFIG_KEXEC_FILE for new syscall
x86,mm: fix pte_special versus pte_numa
hugetlb_cgroup: use lockdep_assert_held rather than spin_is_locked
mm/zpool: use prefixed module loading
zram: fix incorrect stat with failed_reads
lib: turn CONFIG_STACKTRACE into an actual option.
mm: actually clear pmd_numa before invalidating
memblock, memhotplug: fix wrong type in memblock_find_in_range_node().
...
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86'
to 'x86'. Test by compilation.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At this point, USB/IP userspace code is fully functional
and can be moved out of staging.
Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there're two callchain print functions in TUI - one for the
hists browser and another for file dump. They do almost same job so
it'd be better consolidate the codes.
To do that, provide two callbacks to the generic logic - one for
printing and another for checking whether it should stop.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408666401-594-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to add field(s) to default field order via using the '+'
prefix, like for report:
$ perf report
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Command Shared Object Symbol
32.40% ls [kernel.kallsyms] [k] filemap_fault
28.19% ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% ls [kernel.kallsyms] [k] enqueue_entity
15.04% ls [kernel.kallsyms] [k] mmap_region
$ perf report -F +period,sample
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Period Samples Command Shared Object Symbol
32.40% 1446493 1 ls [kernel.kallsyms] [k] filemap_fault
28.19% 1258486 1 ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% 1043754 1 ls [kernel.kallsyms] [k] enqueue_entity
15.04% 671160 1 ls [kernel.kallsyms] [k] mmap_region
Works in general for commands using --field option.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408715919-25990-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-h7n9te70flmaqfnj6l06ay6r@git.kernel.org
[ Yanked this out of a patch containing this and some other change ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we run "perf c2c" on more applications, we noticed we're missing
significant samples from a common customer's application. Looking at
the /proc/<pid>/maps file for the app, we see "rwxs" and "rwxp"
permissions on many of the shared memory & heap regions, and on all the
thread stacks.
Because those regions have the "x" bit set, perf marks them with a
MAP_FUNCTION type. Hence ip_resolve_data() never finds load or store
events coming from them.
We fixed this by re-calling thread__find_addr_location with
MAP__FUNCTION in the case where map is NULL as a last ditch effort to
map the sample before giving up and dropping it.
Reported-by: Joe Mario <jmario@redhat.com>
Tested-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408591511-57884-1-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist_browser__show_callchain() and friends don't need to be that
complex. They're splitted in 3 pieces - one for traversing top-level
tree, other one for special casing first chains in the top-level
entries, and last one for recursive traversing inner trees. It led to
code duplication and unnecessary complexity IMHO.
Simplify the function and consolidate the logic into a single function
- it can recursively call itself. A little difference in printing
callchains in top-level tree can be handled with a small change.
It should have no functional change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408583746-5540-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to determine if an address is in the kernel. This is
based on the kernel function kernel_ip().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename machine__get_kernel_start_addr() to
machine__get_running_kernel_start() so that a new function, with a
similar name to the original name, can be added that gets the kernel
start address from the kernel map.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to defer some output via the scripting API, there needs to be a
callback after session processing but before the session is deleted.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test that checks that sched_switch events and tracking events can
be recorded for a workload using the evsel->system_wide and
evsel->tracking flags (respectively) with other events sometimes enabled
or disabled.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408129739-17368-2-git-send-email-adrian.hunter@intel.com
[ Fix build on fedora14 by using a designated initializer for the sched_switch variable ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When perf report runs on TUI, 'P' key dumps current screen to a file but
it incorrectly displayed children overhead (as same of self overhead).
This was because it fetched the value from self stats.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408522080-26556-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that the 'remaining' variable is not used by any real code.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408522080-26556-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Looks like util/debug.h was indirectly included before and is no longer
included now. pr_debug is left undefined and the build of perf tool
fails on Powerpc.
Explicitly include util/debug.h.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Link: http://lkml.kernel.org/r/20140807072700.GA17623@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are seeing a lot of the following with regards to SYSV memory
Failed to open /SYSV0000279c, continuing without symbols
We don't believe this memory will have DSO info, so treat it like the
heap and stack for now and skip it to prevent the warning.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Joe Mario <jmario@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1408501874-244377-1-git-send-email-dzickus@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull idle update from Len Brown:
"Two Intel-platform-specific updates to intel_idle, and a cosmetic
tweak to the turbostat utility"
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: tweak whitespace in output format
intel_idle: Broadwell support
intel_idle: Disable Baytrail Core and Module C6 auto-demotion
Replaces all strerror with strerror_r in util for making the perf lib
thread-safe.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022236.3545.3367.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make error messages thread-safe, this replaces strerror with
strerror_r for warnings, and just shows the return value instead of
using strerror for debug messages.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022234.3545.22199.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use strerror_r instead of strerror in error messages for thread-safety.
This also introduce STRERR_BUFSIZE macro for the default size of message
buffer for strerror_r.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022232.3545.14026.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the strlist__add doesn't involves any IO, the failure reason must
be ENOMEM or EINVAL, moreover this is just a debug message, we don't
need to show the error string.
And also, if get_probe_trace_command_rawlist() returns NULL, it doesn't
mean the rawlist is empty, there is an error. So caller must use
-ENOMEM for the error.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814022230.3545.99254.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf report -g/--call-graph option parser requires for option
argument having following order:
type,min_percent[,print_limit],order,key
But sometimes it's annoying to type all even if one just wants to change
the "order" or "key" setting.
This patch fixes it to remove the ordering restriction so that one can
use just "-g caller", for instance. The only remaining restriction is
that the "print_limit" always comes after the "min_percent".
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1407996100-6359-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can more readily understand in which list heads structs are
stored into.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Haren Myneni <hbabu@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1408087583-32239-6-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds the triplet used for arm64 by Android. Others will want to add
their own later.
Signed-off-by: Elliott Hughes <enh@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140814193920.A7D2D20572@enh.mtv.corp.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instructions like "mov r9,QWORD PTR [rdx+0x8]" were being truncated to
"mov r9,QWORD" by code that assuemd operands cannot have spaces.
Signed-off-by: Alex Converse <aconverse@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408050180-14088-1-git-send-email-aconverse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warn user to rebuild target with debuginfo when the perf probe fails to
find debug information in the target binary.
Without this, perf probe just reports the failure, but it's no hint for
users. This gives more hint for users.
Without this:
$ strip perf
$ ./perf probe -x perf -L argv_split
Failed to open debuginfo file.
Error: Failed to show lines.
With this:
$ strip perf
$ ./perf probe -x perf -L argv_split
The /home/fedora/ksrc/linux-3/tools/perf/perf file has no debug information.
Rebuild with -g, or install an appropriate debuginfo package.
Error: Failed to show lines.
The "rebuild with ..." part changes to "rebuild with CONFIG_DEBUG_INFO"
if the target is the kernel or a kernel module.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: yrl.pp-manager.tt@hitachi.com
Link: http://lkml.kernel.org/r/20140815014432.29869.57941.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to enable a specific event within a specific perf event
buffer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flags will be used to export branch type and transaction status.
insn_len is preparation for pairing calls and returns because the return
address equals the call address plus the instruction length (insn_len).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-22-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add machine__thread_exec_comm() to return the comm that matches the last
exec, if the comm_exec flag is present, or the last comm otherwise.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For grouping together all the data from a single execution, which is
needed for pairing calls and returns e.g. any outstanding calls when a
process exec's will never return.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-2-git-send-email-adrian.hunter@intel.com
[ Remove testing if comm->exec is false before setting it to true ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Python script API repeatedly uses the same lines of code to get and
call objects. Make that into helper functions instead.
A side-effect is that some reference counting bugs disappear because the
new call_object() function always decrements the reference count of
'retval'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-19-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf script was not displaying callchains if any selected event did not
have PERF_SAMPLE_CALLCHAIN.
Change this to disable callchains only if all selected events do not
have PERF_SAMPLE_CALLCHAIN.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to peek at other events in the event stream.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to change which event is used to track mmap, comm and
task events.
This is needed with Instruction Tracing because the Instruction Tracing
event must come first but cannot be used for tracking because it will be
disabled under some circumstances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to cause a selected event to be opened always without a
pid when configured by perf_evsel__config().
This is needed when using the sched_switch tracepoint to follow object
code execution.
sched_switch occurs before the task switch and so it cannot record it in
a context limited to that task. Note that also means that sched_switch
is useless when capturing data per-thread, as is the 'context-switches'
software event for the same reason.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Label symbols are missing because elf_sec__is_a() fails to find the
section because the section strings do not match the section headers
because the sections headers are from the 'runtime' object and the
sections strings are from the 'symbol source' object.
Fix by getting the section strings from the 'runtime' object so that
they match the section headers.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1406786474-9306-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some C++ symbols have very long name and they make column length longer.
Most of them are about parameters including templates and we can ignore
such info most of time IMHO.
This patch passes DMGL_NO_OPTS by default when calling bfd_demangle().
One can still see full symbols with -v/--verbose option.
before:
JS_CallFunctionValue(JSContext*, JSObject*, JS::Value, unsigned int, JS::Value*, JS::Value*)
after:
JS_CallFunctionValue
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current -z option does almost nothing. It doesn't zero the existing
samples so that we can see profiles of exited process after last
refresh. It seems it only affects annotation.
This patch clears existing entries before processing if -z option is
given. For this original decaying logic also moved before processing.
Reported-by: Stephane Eranian <eranian@google.com>
Tested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407831366-28892-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When you specify "--branch-stack"("-b" for short) or
"--no-branch-stack", "branch_mode" variable is set to 1 or 0
respectively. However, the code is just checking if the variable is -1
or not, ignoring "branch_mode == 1" case. Thus "perf report -b" dose not
show its result with the branch sorted mode. This patch fix the problem.
Signed-off-by: Naohiro Aota <naota@elisp.net>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87y4v1fylq.fsf@elisp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The currently when perf TUI report shows callchain, the first level
chains have bogus '+' sign even though only the last one has children.
Since they are on a single line of the chain, toggling intermediate
entries has no effect. Fix it to show '+' sign at the last entry only.
Note that non-first level callchain entries don't have this problem.
Before:
---------------------------------------------------------------------------
Children Self Command Shared Object Symbols
- 40.70% 0.00% swapper [kernel.kallsyms] [k] cpuidle_wrap_enter
+ cpuidle_wrap_enter
+ cpuidle_enter_tk
+ cpuidle_idle_call
+ cpu_idle
After:
---------------------------------------------------------------------------
Children Self Command Shared Object Symbols
- 40.70% 0.00% swapper [kernel.kallsyms] [k] cpuidle_wrap_enter
cpuidle_wrap_enter
cpuidle_enter_tk
cpuidle_idle_call
+ cpu_idle
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1407909761-10822-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently vmlinux_path__init() only tries to find vmlinux file from
current directory, /boot and some canonical directories with version
number of the running kernel. This can be a problem when reporting old
data recorded on a kernel version not running currently.
We can use --symfs option for this but it's annoying for user to do it
always. As we already have the info in the perf.data file, it can be
changed to use it for the search automatically.
Before:
$ perf report
...
# Samples: 4K of event 'cpu-clock'
# Event count (approx.): 1067250000
#
# Overhead Command Shared Object Symbol
# ........ .......... ................. ..............................
71.87% swapper [kernel.kallsyms] [k] recover_probed_instruction
After:
# Overhead Command Shared Object Symbol
# ........ .......... ................. ....................
71.87% swapper [kernel.kallsyms] [k] native_safe_halt
This requires to change signature of symbol__init() to receive struct
perf_session_env *.
Reported-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407825645-24586-14-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-13-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of fixing dso__load_kernel_sym(). It needs a
session info before calling symbol__init().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When uname() failed, it should free vmlinux_path.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some paths in perf script don't call perf_session__delete() after
creating a new session.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407825645-24586-2-git-send-email-namhyung@kernel.org
[ Saved errno value before calling perror(), as pointed out by Adrian Hunter ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When doing a system-wide trace with Intel PT, the jump label set up as a
result of probing CLOEXEC gets reset while the trace is running. That
causes an Intel PT decoding error because the object code (obtained from
/proc/kcore) does not match the running code at that point. While we
can't expect there never to be jump label changes, we can avoid cases
that the perf tool itself creates.
The problem is avoided by first trying a cpu-wide event (pid = -1) for
probing the PERF_FLAG_FD_CLOEXEC flag and falling back to an event for
the current process (pid = 0).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407855871-15024-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fall back to probing with the current pid if cpu-wide probing fails.
This primarily affects the setting of comm_exec flag when the user is
un-privileged and /proc/sys/kernel/perf_event_paranoid > 0.
The change to comm_exec can be observed by using -vv with perf record
and a kernel that supports comm_exec.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407855871-15024-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When probing the kernel API the kernel should be excluded otherwise the
probe will fail for users with insufficient privilege to profile the
kernel.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407855871-15024-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With /proc/sys/kernel/perf_event_paranoid set to 2, the probe of
PERF_FLAG_FD_CLOEXEC would fail. Fix by excluding kernel profiling from
the probe event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1407855871-15024-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf probe --del doesn't work if only CONFIG_UPROBE_EVENTS=y
because it aborts when it fails to open kprobe_events file before
checking uprobe_events file.
This fixes --del option to delete dynamic events if it can open either
kprobe_events or uprobe_events. Only if it failed to open both of them,
it shows an error message and aborts.
Without this patch, if we run perf probe -d on the kernel configured
with CONFIG_KPROBE_EVENTS=n and CONFIG_UPROBE_EVENTS=y,
# perf probe -d \*
kprobe_events file does not exist - please rebuild kernel with CONFIG_KPROBE_EVENTS.
Error: Failed to delete events.
With this patch,
# perf probe -d \*
Removed event: probe_perf:alloc_event
Changes in v2:
- Use strerror_r instead of strerror.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140813161250.26440.24028.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current perf probe --list doesn't work if only CONFIG_UPROBE_EVENTS=y
because it aborts when it fails to open kprobe_events file before
checking uprobe_events file.
This fixes --list option to show dynamic events if it can open either
kprobe_events or uprobe_events. Only if it failed to open both of them,
it shows an error message and aborts.
Without this patch, if we run perf probe -l on the kernel configured
with CONFIG_KPROBE_EVENTS=n and CONFIG_UPROBE_EVENTS=y,
# perf probe -l
/sys/kernel/debug/tracing/kprobe_events file does not exist - please rebuild ker
Error: Failed to show event list.
With this patch,
# perf probe -l
probe_perf:alloc_event (on alloc_event@lib/traceevent/event-parse.c in /home/fedora/ksrc/linux-3/tools/perf/perf)
Changes in v2:
- Use strerror_r instead of strerror.
Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140813161248.26440.84370.stgit@kbuild-fedora.novalocal
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the initial ~(ICANON | ECHO) terminal mode is not set, so we
dont get stdin data until we press ENTER.
Fixing this by early setting of the ~(ICANON | ECHO) mode and leaving
this mode for whole life of the command, because canonical mode is not
needed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407747014-18394-16-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TUI code setup standard signals handling, while the stdio display
code does not. This leads to premature termination of display thread
when signal is received and leaving terminal in wrong state.
Also adding terminal cleanup at the end of display thread, to ensure we
get the old terminal state in case of signal interruption.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407747014-18394-14-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding set_term_quiet_input helper to set the terminal quiet, out from
'perf top', used in following patches in 'perf kvm'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407747014-18394-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create the display thread, but never join it. It gives
the display thread a chance to quit and cleanup properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1407747014-18394-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'top' tool initially supported only kernel symbols, when making it
support userspace symbols we forgot to make the symbol filter first
check that the DSO is the kernel one. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
c: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-54haztkeigmbump5sexxnzhv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
. Show better error message in case we fail to open counters due to EBUSY error,
for instance, when oprofile is running. (Jiri Olsa)
. Honour -w in the report tools (report, top), allowing to specify the widths
for the histogram entries columns. (Namhyung Kim)
. Don't run workload if not told to, as happens when the user has no
permission for profiling and even then the specified workload ends
up running (Arnaldo Carvalho de Melo)
. Do not ignore mmap events in 'perf kmem report'. This tool was using
the kernel mmaps in the running machine instead of processing the mmap
records from the perf.data file. (Namhyung Kim)
. Properly show submicrosecond times in 'perf kvm stat' (Christian Borntraeger)
. Honour existing 'perf record' --time/-T command line option (Andi Kleen)
. Make sure --symfs usage includes the path separator (Arnaldo Carvalho de Melo)
Developer Stuff:
. Fix arm64 build error (Mark Salter)
. Fix make PYTHON override (Namhyung Kim)
. Rename ordered_samples to ordered_events and allow setting a queue
size for ordering events (Jiri Olsa)
. Default to python version 2 (Thomas Ilsche)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wUw+
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible fixes and changes:
* Show better error message in case we fail to open counters due to EBUSY error,
for instance, when oprofile is running. (Jiri Olsa)
* Honour -w in the report tools (report, top), allowing to specify the widths
for the histogram entries columns. (Namhyung Kim)
* Don't run workload if not told to, as happens when the user has no
permission for profiling and even then the specified workload ends
up running (Arnaldo Carvalho de Melo)
* Do not ignore mmap events in 'perf kmem report'. This tool was using
the kernel mmaps in the running machine instead of processing the mmap
records from the perf.data file. (Namhyung Kim)
* Properly show submicrosecond times in 'perf kvm stat' (Christian Borntraeger)
* Honour existing 'perf record' --time/-T command line option (Andi Kleen)
* Make sure --symfs usage includes the path separator (Arnaldo Carvalho de Melo)
Development infrastructure fixes and changes:
* Fix arm64 build error (Mark Salter)
* Fix make PYTHON override (Namhyung Kim)
* Rename ordered_samples to ordered_events and allow setting a queue
size for ordering events (Jiri Olsa)
* Default to python version 2 (Thomas Ilsche)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to PEP 394 recommendation [1], it's more portable to use
python2 rather than plain python to refer python binary version 2.
Since there're distros using python3 by default like Arch, and we don't
support python3 (yet), it'd be better using python2 explicitly.
But older versions (prior to 2.7) seem not to provide python2 but just
python. Given that it's only old version, try python2 first and then
fallback to python. It'll ensure that it always points to python 2.x.
I tested (compiles and perf script runs) with the combinations:
1) python -> python2.x, python-config -> python2.x-config
python2 N/A, python2-config N/A
2) python -> python3.x, python-config -> python3.x-config
python2 -> python2.x, python2-config -> python2.x-config
3) python -> python2.x, python-config -> python2.x-config
python2 -> python2.x, python2-config -> python2.x-config
4) python -> python2.x, python-config -> python2.x-config
python2 -> python2.x, python2-config N/A
Based on / replaces the patch 2/2 by Namhyung Kim.
[1] https://www.python.org/dev/peps/pep-0394
Based-on-patch-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/53DF8493.6070206@tu-dresden.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were using PERF_COUNT_SW_CPU_CLOCK as an probing event type. Using
expected PERF_TYPE_SOFTWARE type instead.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/20140803121036.GA1181@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If user sets ui.show-headers config option to false, it didn't calculate
default column width so it broke the alignment. This is because it does
the calculation just before showing headers.
Move it to the beginning of the hist browser so that it can be called
regardless of the config option.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It makes the code a bit simpler and easier to debug IMHO.
I guess it can also remove similar code in perf diff, but let's keep
it for a future work. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -w/--column-widths option like perf report does so that users are
able to see symbols even with some very long C++ library/functions.
It can be a list separated by comma for each column.
$ perf top -w 0,20,30
The value of 0 means there's no limit.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set column width and do not change it if user gives -w/--column-widths
option. It'll truncate longer symbols than the width if exists.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Save column length in the hpp format and pass it to print functions.
This is a preparation for users to control column width in the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can properly handle alignment requirements later. To do
that, add percent_color_len_snprintf() fucntion to help coloring of
overhead columns.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf left-aligns column headers but the contents does not. It
should have same alignment. This requires a change in pid sort key - it
consists of two part (pid and comm). As length of comm can be vary it'd
be better to change the order of them.
Thanks to Jiri Olsa for pointing this out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas reported that make PYTHON=python2 is not work on some systems. I
can reproduce it on my ArchLinux box too.
This is because it's overridden by config/feature-checks/Makefile
regardless of PYTHON setting. I guess it's a bug slipped into during
the feature checking change.
Actually, we don't need to check python-config in the feature-checks.
We can just pass appropriate FEATURE_CHECK_*FLAGS.
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Link: http://lkml.kernel.org/r/1406617040-26909-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf kmem command didn't process mmap events for some unknown reason
and it instead gets symbol info from a running kernel. This is
problematic if perf kmem record was run on a different kernel.
This patch adds the mmap event handlers and reverts the commit
e727ca73f8 ("perf kmem: Resolve kernel symbols again").
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406872771-23933-1-git-send-email-namhyung@kernel.org
[ Fixed up merge conflict with Jiri's ordered_events rename patch set ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Showing better error message in case we fail to open counters due to the
EBUSY error. If we detect oprofile daemon process running, we now
display following message for EBUSY error:
$ perf record ls
Error:
The PMU counters are busy/taken by another profiler.
We found oprofile daemon running, please stop it and try again.
In case oprofiled was not detected the current error message stays:
$ perf record ls
Error:
The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (cycles).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
Also changing PERF_FLAG_FD_CLOEXEC detection code not to display error
in case of EBUSY error, as it currently does:
$ perf record ls
Error:
perf_event_open(..., PERF_FLAG_FD_CLOEXEC) failed with unexpected error 16 (Device or resource busy)
perf_event_open(..., 0) failed unexpectedly with error 16 (Device or resource busy)
The PMU counters are busy/taken by another profiler.
We found oprofile daemon running, please stop it and try again.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Cc: Yann Droneaud <ydroneaud@opteya.com>
Link: http://lkml.kernel.org/r/1406908014-8312-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In forced flush (OE_FLUSH__HALF) we break the rules of the flush
timestamp via PERF_RECORD_FINISHED_ROUND event, so we could get out of
order event.
Do not force error in this case plus changing the output warning to use
WARN_ONCE.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-8q8794a8nlmpd1u8xrqmcyd2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding some prints for ordered events queue, to help debug issues.
Adding debug_ordered_events debug variable to be able to enable ordered
events debug messages using:
$ perf --debug ordered-events=2 report ...
Also using oe pointer in perf_session__queue_event instead of chained
session variable dereferencing.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-7p3mnnopjvsp9nmk9msqcfkm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_config_u64 function to be able to parse 'llong' values out
of config file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ni6gqdlvw7khp74r9htvklkb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding ordered_events__free function to release all the struct
ordered_events data. It's replacement for former
perf_session_free_sample_buffers function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-urraa8ccay4o14wambjraws7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As Namhyung pointed out we can use list_move in ordered_events_delete.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-m8ae5s5cuwyytitgb6iqilid@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making perf_session__deliver_event global function, as it will be called
from another object in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-rz7s2b8uwv567bigckh75gvk@git.kernel.org
[ Fixup naming to match class__method schema, as now is more widely exposed ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patches we added a limit for ordered events queue allocation
size. If we reach this size we need to flush (part of) the queue to get
some free buffers.
The current functionality is not affected, because the limit is hard
coded to (u64) -1. The configuration code for size will come in
following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ggcas0xdq847fi85bz73do2e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add limit to the ordered events queue allocation. This way we will be
able to control the size of the queue buffers.
There's no limit at the moment (it's set to (u64) -1). The config code
will come in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-lw1ny3mk4ctb6su5ght5rsng@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar