We should not add trailing ; after each member to allow other
than statements-style uses of this helper macro.
While here s/func/param for clarity.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-1-michal.wajdeczko@intel.com
For certain platforms on certain encoders, timings are driven
from port instead of pipe. Thus, we can't rely on pipe scanline
registers to get the timing information. Some cases scanline
register read will not be functional.
This is causing vblank evasion logic to fail since it relies on
scanline, causing atomic update failure warnings.
This patch uses pipe framestamp and current timestamp registers
to calculate scanline. This is an indirect way to get the scanline.
It helps resolve atomic update failure for gen9 dsi platforms.
v2: Addressed Ville and Daniel's review comments. Updated the
register MACROs, handled race condition for register reads,
extracted timings from the hwmode. Removed the dependency on
crtc->config to get the encoder type.
v3: Made get scanline function generic
v4: Addressed Ville's review comments. Added a flag to decide timestamp
based scanline reporting. Changed 64bit variables to u32
v5: Adressed Ville's review comments. Put the scanline compute function
at the place of caller. Removed hwmode flags from uapi and used a local
i915 data structure instead.
v6: Used vblank hwmode to get the timings.
v7: Fixed sparse warnings, indentation and minor review comments.
v8: Limited this only for Gen9 DSI.
Credits-to: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506347761-4201-1-git-send-email-vidya.srinivas@intel.com
i830 seems to occasionally forget the PIPESTAT enable bits when
we read the register. These aren't the only registers on i830 that
have problems with RMW, as reading the double buffered plane
registers returns the latched value rather than the last written
value. So something similar is perhaps going on with PIPESTAT.
This corruption results on vblank interrupts occasionally turning off
on their own, which leads to vblank timeouts and generally a stuck
display subsystem.
So let's not RMW the pipestat enable bits, and instead use the cached
copy we have around.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914151731.5034-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Currently we're doing:
1. acquire lock
2. write word to hardware
3. release lock
4. repeat from 1
to load the DMC firmware. Due to the cost of acquiring/releasing a lock,
and the size of the DMC firmware, this slows down DMC loading a lot.
This patch simply acquires the lock, writes the entire firmware,
then releases the lock. Testing shows resume speedups
in the order of 10ms on platforms with DMC firmware (GEN9+).
v2: Per feedback from Chris & Ville there's no need to do the whole
forcewake dance, so lose that bit (Chris, Ville)
v3: Actually send the new version of the patch...
v4: Don't acquire the uncore lock. Disable preempt. (Chris)
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905131050.11655-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We already print training pattern used during link training and also
print if the source or sink does not support TPS3 for HBR2 link rates,
see intel_dp_training_pattern().
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918222141.4674-5-dhinakaran.pandiyan@intel.com
Both mst_disable_dp and mst_post_disable_dp print number of active links
before the variable has been updated. Move the print statement in
mst_disable_dp after the decrement so that the printed values indicate
the disabing of a mst connector. Also, add some text to clarify what we
are printing.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918222141.4674-2-dhinakaran.pandiyan@intel.com
Print connector name in destroy_connect() and this doesn't add any extra
lines to dmesg. The debug macro has been moved before the unregister
call so that we don't lose the connector name and id.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918222141.4674-1-dhinakaran.pandiyan@intel.com
Since we inherited the context image setup from gen8 which needed a
per-bb workaround (for GPGPU), we are submitting an empty per-bb buffer
on gen9. Now that we can skip adding the buffer to the context image,
remove the dangling per-bb. This slightly improves execution latency,
most notably on an idle engine.
References: https://bugs.freedesktop.org/show_bug.cgi?id=87725
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921135444.27330-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The per-context and per-batch workaround buffers are optional, yet we
tell the GPU to execute them even if they contain no instructions. Doing
so incurs the dispatch latency, which we can avoid if we don't ask the
GPU to execute the no-op buffers. Allow ourselves to skip setup of empty
buffer, and then to only enable non-empty buffers in the context image.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921135444.27330-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
As we emulate execlists on top of the GuC workqueue, it is not
restricted to just 2 ports and we can increase that number arbitrarily
to trade-off queue depth (i.e. scheduling latency) against pipeline
bubbles.
v2: rebase. better commit msg (Chris)
v3: rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-5-mika.kuoppala@intel.com
When first execlist entry is processed, we move the port (contents).
Introduce function for this as execlist and guc use this common
operation.
v2: rebase. s/GEM_DEBUG_BUG/GEM_BUG (Chris)
v3: rebase
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-4-mika.kuoppala@intel.com
On reset and wedged path, we want to release the requests
that are tied to ports and then mark the ports to be unset.
Introduce a function for this.
v2: rebase
v3: drop local, keep GEM_BUG_ON (Michał, Chris)
v4: rebase
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-3-mika.kuoppala@intel.com
Engine's execlist related items have been increasing to
a point where a separate struct is warranted. Carve execlist
specific items to a dedicated struct to add clarity.
v2: add kerneldoc and fix whitespace (Joonas, Chris)
v3: csb_mmio changes, rebase
v4: s/\b(el|execlist)\b/execlists/ (Joonas)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> (v3)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v3)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922124307.10914-1-mika.kuoppala@intel.com
No users now outside of i915_wait_request(), so we can make it private to
i915_gem_request.c, and assume the caller knows the seqno. In the
process, also remove i915_gem_request_started() as that was only ever
used by i915_spin_request().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922120333.25535-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The total size of the context has decreased with the removal of the
URB_ATOMIC section. BSpec indicates 16750 DWORDs (17 pages), plus
one page for PPHWSP, and I'm throwing an extra page for precaution.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506035989-14295-1-git-send-email-oscar.mateo@intel.com
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.
v5: pure rename
v6: fix
Credits-to: Coccinelle
@@
identifier n;
@@
(
- i915.n
+ i915_modparams.n
)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
After we see our target seqno has been completed by the hw, we need to
confirm that it still matches the request (as it may have been preempted
before the spin completes). If the request no longer matches the target
seqno, we need to restart the wait to reacquire that seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921210903.18337-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
If preemption occurs at precisely the right moment, we may decide that
the wait is complete even though the wait's request is no longer
executing (having been preempted). We handle this situation by double
checking that request following deciding whether the wait is complete.
Reported-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918162734.21294-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
As we now check if the seqno is complete in order to signal the fence,
we can also decide not to wake up the first_waiter until it is ready
(since it is waiting on the same seqno). The only caveat is that if we
need the engine->irq_seqno_barrier to enforce some coherency between an
interrupt and the seqno read, we have to always wake the waiter in order
to perform that heavyweight barrier.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918162734.21294-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Since we reuse the same field for the user passing in their control
flags, and for the kernel to track a couple of bits of state, document
and check that those do not overlap.
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921110135.15990-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
hw_check is being assigned and updated but is no longer being read,
hence it is redundant and can be removed.
Detected by clang scan-build:
"warning: Value stored to 'hw_check' during its initialization
is never read"
Fixes: f6d1973db2 ("drm/i915: Move modeset state verifier calls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914162154.11304-1-colin.king@canonical.com
Most of our DP encoder hooks are split into per-platform variants.
.disable() an exception, and thus it's a bit messy. Let's split it
up as well. We'll leave the common parts in a helper called by
each platform specific hook. Now each platform has mostly its own
hooks. Some hooks are still shared between vlv and chv, and between
g4x and ilk. None of the remaining shared hooks have any platform
checks in them however so duplicating them doesn't seem particularly
useful.
There is a subtle change on VLV/CHV where we now disable PSR before
audio, whereas before we disabled PSR after audio. That should be
totally fine, and PSR is disabled by default anyway. Jani also pointed
out to me that PSR + audio doesn't seem like a particularly realistic
combination.
v2: Drop the PSR HAS_DDI check here (Rodrigo)
Pimp up the commit message a bit based on a chat with Jani
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920151251.5961-1-ville.syrjala@linux.intel.com
It is safe to call intel_psr_disable() on a platform without PSR. We
don't have such a check when calling intel_psr_enable() either.
v2: Don't drop the HAS_DDI check quite yet (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920151236.5864-1-ville.syrjala@linux.intel.com
On kbl evidence indicates that even if the hardware happily
tells us to proceed with reset, it really isn't ready.
Resetting a freely running batchbuffer after we have ack for readiness,
still can cause a system hang.
We also have similar experiences on older gens. So now
attempt to stop engines before proceeding for reset, on all
gens where we have a gpu reset. This has shown to improve reset
reliability and reduce the risk of losing the machine.
v2: Add fixme for wa (Joonas)
Testcase: igt/prime_busy/hang-* # kbl
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919144128.25506-1-mika.kuoppala@intel.com
drm_edid_to_eld() initializes the connector ELD to zero, overwriting the
ELD connector type initialized in intel_audio_codec_enable(). If
userspace does getconnector and thus get_modes after modeset, a
subsequent audio component i915_audio_component_get_eld() call will
receive an ELD without the connector type properly set. It's fine for
HDMI, but screws up audio for DP.
Always set the ELD connector type at intel_connector_update_modes()
based on the connector type. We can drop the connector type update from
intel_audio_codec_enable().
Credits to Joseph Nuzman <jnuzman@gmail.com> for figuring this out.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joseph Nuzman <jnuzman@gmail.com>
Reported-by: Joseph Nuzman <jnuzman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101583
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Joseph Nuzman <jnuzman@gmail.com>
Cc: stable@vger.kernel.org # v4.10+, maybe earlier
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919153813.29808-1-jani.nikula@intel.com
We now have Coffee Lake on our CI systems.
Coffee Lake is at this point in same stage as Kaby Lake.
And it seems that we don't have any risk of bad blank
screens or anything like that. So let's remove the protection.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170907230632.25650-1-rodrigo.vivi@intel.com
"CNL PCH chance of hang when software accesses south display
registers after hotplug is enabled.
Workaround: Program 0xC2000 bits 11:8 = 0xF before enabling
south display hotplug detection."
"Workaround only needs to be applied to pre-production steppings
used in graphics capable SKUs, but it is easier to apply to
everything, and does not hurt."
v2: Moving from clock gating to right before enabling
SHOTPLUG_CTL as it should be.
v3: Align with SOUTH_CHICKEN1 (DK) and consequently use proper
spaces on bits definition since other bits around already use
new style. And now that checkpatch is not noise anymore I also
fixed the reg read mask to avoid going over 80 chars.
Suggested-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919215703.25947-1-rodrigo.vivi@intel.com
A fence may be signaled from any context, including from inside a timer.
One example is timer_i915_sw_fence_wake() which is used to provide a
safety-net when waiting on an external fence. If the external fence is
not signaled within a timely fashion, we signal our fence on its behalf,
and so we then may process subsequent fences in the chain from within
that timer context.
Given that dma_i915_sw_fence_wake() may be from inside a timer, we cannot
then use del_timer_sync() as that requires the timer lock for itself. To
circumvent this, while trying to keep the signal propagation as low
latency as possible, move the completion into a worker and use a bit of
atomic switheroo to serialise the timer-callback and the dma-callback.
Testcase: igt/gem_eio/in-flight-external
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170911084135.22903-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
archdata.iommu only exists when CONFIG_IOMMU_API is enabled (and only
applies to intel-iommu in our case) so conditionally compile it out when
it doesn't exist.
Fixes: b5891fb520 ("drm/i915/selftests: Disable iommu for the mock device")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918164652.14200-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Don't touch other bits. My bad.
I haven't seen any case where those other bits appeard to be
set before we touch it, but it is safe to avoid touching
other bits we weren't told to touch.
Fixes: 0a46ddd57c ("drm/i915/cnp: Wa 1181: Fix Backlight issue")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170908234534.17986-1-rodrigo.vivi@intel.com
Some platforms do not support PSR and DRRS simultaneously.
Visual artifacts and flickering were reported on BDW HP Spectre
x360 Convertible. Deferring to PSR when both PSR and DRRS are
supported by the panel.
V2: Minor code-style changes suggested by Rodrigo
V3: Add a WARN_ON during PSR init suggested by Dhinakaran
Correct debug message,title suggested by Jani
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101111
Cc: Nicholas Stommel <nicholas.stommel@gmail.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914181641.24393-1-radhakrishna.sripada@intel.com
On some machines, the iommu cannot allocate a domain for the mock device
causing the dma_map_sg() to fail, and the selftest to fail with -ENOMEM.
For the mock selftests, we are using a fake device and do not care about
iommu; so convince intel_iommu to treat us as a dummy device with an
identity mapping (and no iommu domain).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101080
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914162240.18310-1-chris@chris-wilson.co.uk
Tested-by: Elizabeth De La Torre Mena <elizabethx.de.la.torre.mena@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com
The cache attribute of the required entry has to be the same with the
existing value. After this requirement is met, the futher comparison
should be performed. After this fix, the refined test case can pass.
v2:
- Refine the tittle and comments. (Rodrigo)
Fixes: 4395890a48 ("drm/i915: Introduce private PAT management")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1505741794-10593-1-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We can just operate on the wq_tail directly (in the process descriptor).
This allows us to remove the duplicated tail from the client. While I'm
here let's also remove the constants kept in the client and document our
locking requirements. This causes a small change in one of GuC debugfs
files. We're no longer reporting constant values (which I don't think
is a problem), but we're also no longer reporting the tail (does anyone
care?).
v2: Update tail after wqi contents. (Chris)
v3: Really update tail after wqi contents.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170918092536.12287-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
All we're really doing is incrementing a simple counter in a
doorbell_info struct. We can do without extra variables and a separate
counter kept in guc_client. Since it's gone, we're also removing its
debugfs.
The only functional change here, is that we're no longer treating 0 as a
special value. GuC doesn't seem to care, why should we?
v2: Restore desc->tail update.
v3: Drop the retry loop, assert that doorbell cookie doesn't change
behind our back.
v4: WARN rather than BUG, use xchg. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914105125.3031-1-michal.winiarski@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
To create an upper bound on number of GuC workitems, we need to change
the way that requests are being submitted. Rather than submitting each
request as an individual workitem, we can do coalescing in a similar way
we're handlig execlist submission ports. We also need to stop pretending
that we're doing "lite-restore" in GuC submission (we would create a
workitem each time we hit this condition). This allows us to completely
remove the reservation, replacing it with a compile time check.
v2: Also coalesce when replaying on reset (Daniele)
v3: Consistent wq_resv - per-request (Daniele)
v4: Squash removing wq_resv
v5: Reflect i915_guc_submit argument changes in doc
v6: Rebase on top of execlists reset/restart fix (Chris,Michał)
References: https://bugs.freedesktop.org/show_bug.cgi?id=101873
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-2-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Originally removed in:
c1adab9703 ("drm/i915/guc: Remove failed doorbell stat from debugfs")
f1448a62a1 ("drm/i915/guc: Remove last submission result from debugfs")
Were accidentally restored in:
925344ccc9 ("BackMerge tag 'v4.12-rc5' into drm-next")
We can also remove unused variable and replace it with a WARN.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170914083216.10192-1-michal.winiarski@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Given the mechanism to unwind and replay requests (designed to support
preemption), we have an alternative to the current method of
resubmitting the ELSP upon reset. Resubmitting ELSP turns out to be more
complicated than expected, due to having to handle lost context-switch
interrupts and so guessing what ELSP we need to resubmit later. Instead,
by unwinding the requests and clearing the ELSP tracking entirely, we
can then just dequeue the first pair of ready requests after resetting,
using the normal submission procedure.
Currently, the unwound requests have maximum priority and so are
guaranteed to be resubmitted upon resume. If we are lucky, we may be
able to coalesce a new request on top!
Suggested-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-4-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
In the next patch we will want to reinsert a request not at the end of
the priority queue, but at the front. Here we split insert_request()
into two, the first function retrieves the priority list (for reuse for
unsubmit later) and a wrapper function to insert at the end of that list
and to schedule the tasklet if we were first.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-3-chris@chris-wilson.co.uk
During a reset, we may skip over completed requests and lost
context-switch interrupts. Following the reset, we may then may end up
with no active requests in the ELSP (and so do not resubmit to restart
the engine), but have a queue of requests ready for execution. This is
unlikely, it requires the last request to complete after the hang is
detected, but not impossible. The outcome of this is that the engine
stalls, possibly leading to full ring and indefinite wait under
struct_mutex, eventually leading to a full driver hang.
Alternatively, we can solve this by unsubmitting the incomplete requests
and just kickstarting the tasklet. Michał has patches for that, which I
initially disliked due to the extra complexity, but the complexity of
this "simple" restart is growing...
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170916204414.32762-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Michal Wajdeczko