usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: c100ea86e6 ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes: 3bb3fd8565 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Turns out these two memory regions also need to be avoided, otherwise
weird things will happen when Linux tries to use this memory.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
A few bugfixes already came up during the merge window. Samsung, ASpeed,
Spear have minor DT changes, in case of Samsung this fixes a regression
compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci platform,
and we get a few last minute defconfig changes.
-----BEGIN PGP SIGNATURE-----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=ECLF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
Thermal framework commit 3fd6d6e2b4 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
-----BEGIN PGP SIGNATURE-----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=n0X3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zXLW
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Fixes for Samsung DTS ARM for v6.3
Thermal framework commit 3fd6d6e2b4 ("thermal/of: Rework the thermal
device tree initialization") merged in v6.1-rc1, exposed
misconfiguration of Exynos Thermal Monitoring Unit (TMU) thermal-sensors
property in DTS. This misconfiguration in DTS was working fine before
that Thermal commit, but now all thermal zones fail to register except
the first one (CPU). This can lead to missing cooling of a board and
eventually either emergency shutdown or damaged board.
* tag 'samsung-dt-fixes-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
Link: https://lore.kernel.org/r/20230221095337.9453-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
API:
- Use kmap_local instead of kmap_atomic.
- Change request callback to take void pointer.
- Print FIPS status in /proc/crypto (when enabled).
Algorithms:
- Add rfc4106/gcm support on arm64.
- Add ARIA AVX2/512 support on x86.
Drivers:
- Add TRNG driver for StarFive SoC.
- Delete ux500/hash driver (subsumed by stm32/hash).
- Add zlib support in qat.
- Add RSA support in aspeed.
-----BEGIN PGP SIGNATURE-----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=dMYe
-----END PGP SIGNATURE-----
Merge tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design for
TV boxes and so far only comes with a dts for its refernece design.
The other 32-bit boards that were added are two ASpeed AST2600 based BMC
boards, the Microchip sam9x60_curiosity development board (Armv5 based!),
the Enclustra PE1 FPGA-SoM baseboard, and a few more boards for i.MX53
and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113 chip,
plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700 non-merge
changesets, among them over 400 alone for Qualcomm. The newly added SoCs
this time are all recent high-end embedded SoCs for various markets,
each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410),
SM6115 (Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568,
RK3566 and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding
to the total number of changes.
-----BEGIN PGP SIGNATURE-----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=I8Ga
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC DT updates from Arnd Bergmann:
"About a quarter of the changes are for 32-bit arm, mostly filling in
device support for existing machines and adding minor cleanups, mostly
for Qualcomm and Samsung based machines.
Two new 32-bit SoCs are added, both are quad-core Cortex-A7 chips from
Rockchips that have been around for a while but were lacking kernel
support so far: RV1126 is a Vision SoC with an NPU and is used in the
Edgeble Neural Compute Module 2(Neu2) board, while RK3128 is design
for TV boxes and so far only comes with a dts for its refernece
design.
The other 32-bit boards that were added are two ASpeed AST2600 based
BMC boards, the Microchip sam9x60_curiosity development board (Armv5
based!), the Enclustra PE1 FPGA-SoM baseboard, and a few more boards
for i.MX53 and i.MX6ULL.
On the RISC-V side, there are fewer patches, but a total of ten new
single-board computers based on variations of the Allwinner D1/T113
chip, plus one more board based on Microchip Polarfire.
As usual, arm64 has by far the most changes here, with over 700
non-merge changesets, among them over 400 alone for Qualcomm. The
newly added SoCs this time are all recent high-end embedded SoCs for
various markets, each on comes with support for its reference board:
- Qualcomm SM8550 (Snapdragon 8 Gen 2) for mobile phones
- Qualcomm QDU1000/QRU1000 5G RAN platform
- Rockchips RK3588/RK3588s for tablets, chromebooks and SBCs
- TI J784S4 for industrial and automotive applications
In total, there are 46 new arm64 machines:
- Reference platforms for each of the five new SoCs
- Three Amlogic based development boards
- Six embedded machines based on NXP i.MX8MM and i.MX8MP
- The Mediatek mt7986a based Banana Pi R3 router
- Six tablets based on Qualcomm MSM8916 (Snapdragon 410), SM6115
(Snapdragon 662) and SM8250 (Snapdragon 865)
- Two LTE dongles, also based on MSM8916
- Seven mobile phones, based on Qualcomm MSM8953 (Snapdragon 610),
SDM450 and SDM632
- Three chromebooks based on Qualcomm SC7280 (Snapdragon 7c)
- Nine development boards based on Rockchips RK3588, RK3568, RK3566
and RK3328.
- Five development machines based on TI K3 (AM642/AM654/AM68/AM69)
The cleanup of dtc warnings continues across all platforms, adding to
the total number of changes"
* tag 'soc-dt-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (1035 commits)
dt-bindings: riscv: correct starfive visionfive 2 compatibles
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
arm64: dts: qcom: msm8996: align RPM G-Link clock-controller node with bindings
arm64: dts: qcom: qcs404: align RPM G-Link node with bindings
arm64: dts: qcom: ipq6018: align RPM G-Link node with bindings
arm64: dts: qcom: sm8550: remove invalid interconnect property from cryptobam
arm64: dts: qcom: sc7280: Adjust zombie PWM frequency
arm64: dts: qcom: sc8280xp-pmics: Specify interrupt parent explicitly
arm64: dts: qcom: sm7225-fairphone-fp4: enable remaining i2c busses
arm64: dts: qcom: sm7225-fairphone-fp4: move status property down
arm64: dts: qcom: pmk8350: Use the correct PON compatible
arm64: dts: qcom: sc8280xp-x13s: Enable external display
arm64: dts: qcom: sc8280xp-crd: Introduce pmic_glink
arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks
arm64: dts: qcom: sm8350-hdk: enable GPU
arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
arm64: dts: qcom: sm8350: finish reordering nodes
arm64: dts: qcom: sm8350: move more nodes to correct place
arm64: dts: qcom: sm8350: reorder device nodes
...
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa733 ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b5 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c75 ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a22360 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a22360 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Add support for the enclustra PE1 board that is based on Arria10
-----BEGIN PGP SIGNATURE-----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=8EYA
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=E8ON
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA dts updates for v6.3, part 2
- Add support for the enclustra PE1 board that is based on Arria10
* tag 'socfpga_dts_updates_for_v6.3_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add enclustra PE1 devicetree
dt-bindings: altera: Add enclustra mercury PE1
Link: https://lore.kernel.org/r/20230216160910.509065-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The enclustra PE1 is a baseboard from enclustra GmbH for the enclustra
Mercury AA1+ SOM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmPne64QHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD12amD/95ZWCwTlvANf1+cSNHWWFa1JlJrMcTE2FK
mKJpehCaV98oeJai4vhXZC6/PL2rK5CQdlLwiUYI4bgBCXFsFPK9bfCbibnLhVR8
vxsij6YKoY12DVf8QXtGzIib63jnTY3kzxhqyD+JYmwr3yZbJbBsrMOr5BGsvGjr
ZcXIDCk+7ipl5mYTUlaLdPed07DbhHIILMrWinYPJiXhKFi1Vt/Q/o1OivCtlXyC
3GxNJft0URUC/tGEdjOKhd+aDThzZ71eBIne7af/sTZ1MU/LVGgfZ0ZuTz+SuGRJ
ZkUN4P4hWh7BDgpe9CYHPAV81lBfom5eZOhLbuWup3f7C1/ANzNkCFlXPoNexxcy
flIuy+9G/GbYcQy1bLvdW3WIQXpYf0EQRbpMC0kqzXhwDSsQwkQBrjb2/bv0vMU+
78ZBjfdGnyDQj0Mw2m7548mZKp229hSDv5hOJXvtdjoPwr51TK81u8EmnAZNjMcs
VraozriRxDyz3ozqUmpDNzM/L20WeXyXGdKBSSeIsDrZgb4Vu4Z2LLmn9YjBolq7
i9h1swZEAazGgPJAmzyPmr99nkXDcGo08G8AHDzpDpUE1txi60i8vlgHCqWJWvDo
04X3qZs6w/rOFTTBdS7X0asCIKdfTgY/tg9BrDilYl1aaP31hWdOIGQMbaywtEKJ
5N/Dbj82lg==
=HOVS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HsWr
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v6.3, part two
Several cleanups pointed out by `make dtbs_check`:
1. Align LED status node name with bindings.
2. Drop redundant properties.
3. Move i2c-gpio node out of soc to top-level, as soc node is expected
to have only MMIO nodes.
4. Correct SPI NOR flash compatible in SMDK5250 and SMDKv310.
5. Align GPIO property names in WM1811-family codec nodes with bindings.
6. Correct MAX98090 codec DAI cells in Snow.
* tag 'samsung-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: correct max98090 DAI argument in Snow
ARM: dts: s5pv210: add "gpios" suffix to wlf,ldo1ena on Aries
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Arndale
ARM: dts: exynos: add "gpios" suffix to wlf,ldo1ena on Midas
ARM: dts: exynos: correct SPI nor compatible in SMDK5250
ARM: dts: exynos: correct SPI nor compatible in SMDKv310
ARM: dts: exynos: move I2C10 out of soc node on Arndale
ARM: dts: exynos: drop redundant address/size cells from I2C10 on Arndale
ARM: dts: exynos: drop default status from I2C10 on Arndale
ARM: dts: exynos: align status led name with bindings on Origen4210
Link: https://lore.kernel.org/r/20230211113103.58894-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All the changes this time are minor devicetree corrections, the majority
being for 64-bit Rockchip SoC support. These are a couple of corrections
for properties that are in violation of the binding, some that put the
machine into safer operating points for the eMMC and thermal settings,
and missing properties that prevented rk356x PCIe and ethernet from
working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support
on various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner
to allow this to be used correctly after a futre driver change,
though it has no effect on older kernels.
-----BEGIN PGP SIGNATURE-----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=23z6
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"All the changes this time are minor devicetree corrections, the
majority being for 64-bit Rockchip SoC support. These are a couple of
corrections for properties that are in violation of the binding, some
that put the machine into safer operating points for the eMMC and
thermal settings, and missing properties that prevented rk356x PCIe
and ethernet from working correctly.
The changes for amlogic and mediatek address incorrect properties that
were preventing the display support on MT8195 and the MMC support on
various Meson SoCs from working correctly.
The stihxxx-b2120 change fixes the GPIO polarity for the DVB tuner to
allow this to be used correctly after a futre driver change, though it
has no effect on older kernels"
* tag 'soc-fixes-6.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: meson-gx: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-g12-common: Make mmc host controller interrupts level-sensitive
arm64: dts: meson-axg: Make mmc host controller interrupts level-sensitive
ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port
arm64: dts: mediatek: mt8195: Fix vdosys* compatible strings
arm64: dts: rockchip: align rk3399 DMC OPP table with bindings
arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a
arm64: dts: rockchip: fix probe of analog sound card on rock-3a
arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1
arm64: dts: rockchip: fix input enable pinconf on rk3399
ARM: dts: rockchip: add power-domains property to dp node on rk3288
arm64: dts: rockchip: add io domain setting to rk3566-box-demo
arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a
arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc
arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro
arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCY+N5WwAKCRCejrg/N2X7
/QIbAQCQ5aARiG6B3IglSdVTQk8a+CRWpelxB9CMCXEohhRkhgD+JS6XRejjoF78
cj3J30OP1SnkZQtTOygxEtmaxEMHNw0=
=gcby
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Oe5O
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 device tree updates for 6.3 #2
It contains:
- cleanups arround flexcom nodes on SAM9X60 SoC as follows:
- preserve same ID for flexcoms and the embedded nodes (e.g. flx4
will embed uart4, spi4, i2c4 but not e.g. uart1, spi2, i2c3);
- SoC specific bindings were moved from board specific file to SoC
specific file
- DMA bindings for all flexcom nodes were added
- SoC file was filled with missing flexcom nodes
- new SAM9X60 Curiosity board that contains 1 uSDcard interface, 1 SDcard
interface, 1 USB device interface, 2 USB Type-A interfaces, 2 CAN
interfaces, 1 10/100 Ethernet interface, 1 LCD RGB666 interface,
1 Gb DDR2, 4 Gb NAND Flash, 2Kb EEPROM, leds, button, power
regulators, UART and JTAG connectors
* tag 'at91-dt-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board
dt-bindings: arm: at91: Add info on sam9x60 curiosity
ARM: dts: at91: sam9x60: Add missing flexcom definitions
ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes
ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART
ARM: dts: at91: sam9x60: fix spi4 node
ARM: dts: at91: sam9x60: move flexcom definitions
ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Link: https://lore.kernel.org/r/20230209084930.289721-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The max98090 has only one DAI and does not take argument to DAI
phandles:
exynos5250-snow-rev5.dtb: audio-codec@10: #sound-dai-cells:0:0: 0 was expected
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230208160424.371678-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The GPIOs properties should end with "gpios" suffix and Linux gpiolib
already handles both names, so switch to preferred one.
While touching the lines, replace open-coded GPIO_ACTIVE_HIGH flag.
Tested-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20230208172634.404452-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:
exynos5250-smdk5250.dtb: /soc/spi@12d30000/flash@0: failed to match any schema with compatible: ['w25x80']
Link: https://lore.kernel.org/r/20230208164942.387390-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
SPI NOR flash compatible should come with generic jedec,spi-nor fallback
and proper vendor prefix:
exynos4210-smdkv310.dtb: /soc/spi@13940000/flash@0: failed to match any schema with compatible: ['w25x80']
Link: https://lore.kernel.org/r/20230208164942.387390-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
I2C10 is represented as i2c-gpio device, thus it is not really a part of
soc MMIO bus:
exynos5250-arndale.dtb: soc: i2c-10: {'pinctrl-names': ['default'], ... } should not be valid under {'type': 'object'}
Link: https://lore.kernel.org/r/20230207210020.677007-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The "status" is a reserved keyword and LED nodes should have generic
prefix:
exynos4210-origen.dtb: leds: status: {'gpios': [[76, 3, 1]],
'function': ['heartbeat'], 'linux,default-trigger': ['heartbeat']} is not of type 'array'
Link: https://lore.kernel.org/r/20230207210020.677007-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
DT schema expects names of operating points tables to match certain
pattern:
qcom-ipq4018-ap120c-ac.dtb: opp_table0: $nodename:0: 'opp_table0' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120072113.138656-1-krzysztof.kozlowski@linaro.org
Add the node describing the sn3193 that's used to provide notification
LED.
Unfortunately the driver currently supports neither multicolor API nor
using the properties function & color, so we use label instead.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230122-msm8974-bacon-features-v2-5-06bb83c20a58@z3ntu.xyz
Add second DSI host and PHY available on the APQ8064 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230121091237.2734272-1-dmitry.baryshkov@linaro.org
DT schema expects nodes ending with "pins:
qcom-apq8060-dragonboard.dtb: mpps@50: cm3605-mpps-state: 'oneOf' conditional failed, one must be fixed:
'mpp5' does not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120174036.351937-1-krzysztof.kozlowski@linaro.org
Arnd Bergmann