Factor out some cut-and-paste code in options parsing.
Saves about 800 bytes on x86-64.
Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Eliminate two mostly duplicate functions (nfs_parse_simple_hostname()
and nfs_parse_protected_hostname()) and instead just make the calling
function (nfs_parse_devname()) do everything.
Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch make nfsv4 use the generic xattr handling code
to get the nfsv4 acl. This will help us to add richacl
support to nfsv4 in later patches
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to skip VFS applying mode for NFS. So set MS_POSIXACL always
and selectively use umask. Ideally we would want to use umask only
when we don't have inheritable ACEs set. But NFS currently don't
allow to send umask to the server. So this is best what we can do
and this is consistent with NFSv3
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Update: added check for zero value as it was before (note: can't simply check
mountd_port for positive value because it's typeof unsigned short)
Default value for mount server port is set to NFS_UNSPEC_PORT (-1) and will not
be changed during parsing mount options for mound data version 6. This default
value will be showed for mountport in /proc/mounts always since current default
check is for zero value. This small mistake leads to big problem, because
during umount.nfs execution from old user-space utils (at least nfs-utils
1.0.9) this value will be used as the server port to connect to. This request
will be rejected (since port is 65535) and thus nfs mount point can't be
unmounted.
Note from Chuck Lever (chuck.lever@oracle.com): this is only possible if
/etc/mtab is a link to /proc/mounts. Not all systems have this configuration.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When nfs client(kernel) don't support NFSv4, maybe user build
kernel without NFSv4, there is a problem.
Using command "mount SERVER-IP:/nfsv3 /mnt/" to mount NFSv3
filesystem, mount should should success, but fail and get error:
"mount.nfs: an incorrect mount option was specified"
System call mount "nfs"(not "nfs4") with "vers=4",
if CONFIG_NFS_V4 is not defined, the "vers=4" will be parsed
as invalid argument and kernel return EINVAL to nfs-utils.
About that, we really want get EPROTONOSUPPORT rather than
EINVAL. This path make sure kernel parses argument success,
and return EPROTONOSUPPORT at nfs_validate_mount_data().
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.
Remove this too as a cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Trying to mount NFS (root partition in my case) fails if CONFIG_NFS_V3
is not selected. nfs_validate_mount_data() returns EPROTONOSUPPORT,
because of this check:
#ifndef CONFIG_NFS_V3
if (args->version == 3)
goto out_v3_not_compiled;
#endif /* !CONFIG_NFS_V3 */
and args->version was always initialized to 3.
It was working in 2.6.36
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
Display the status of 'local_lock' mount option in /proc/mounts.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range
locks. Due to this, some windows applications which seem to use both flock
(share mode lock mapped as flock by Samba) and fcntl locks sequentially on
the same file, can't lock as they falsely assume the file is already locked.
The problem was reported on a setup with windows clients accessing excel files
on a Samba exported share which is originally a NFS mount from a NetApp filer.
Older NFS clients (< 2.6.12) did not see this problem as flock locks were
considered local. To support legacy flock behavior, this patch adds a mount
option "-olocal_lock=" which can take the following values:
'none' - Neither flock locks nor POSIX locks are local
'flock' - flock locks are local
'posix' - fcntl/POSIX locks are local
'all' - Both flock locks and POSIX locks are local
Testing:
- This patch was tested by using -olocal_lock option with different values
and the NLM calls were noted from the network packet captured.
'none' - NLM calls were seen during both flock() and fcntl(), flock lock
was granted, fcntl was denied
'flock' - no NLM calls for flock(), NLM call was seen for fcntl(),
granted
'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl()
'all' - no NLM calls were seen during both flock() and fcntl()
- No bugs were seen during NFSv4 locking/unlocking in general and NFSv4
reboot recovery.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi,
An NFS client executes a statfs("file", &buff) call.
"file" exists / existed, the client has read / written it,
but it has already closed it.
user_path(pathname, &path) looks up "file" successfully in the
directory-cache and restarts the aging timer of the directory-entry.
Even if "file" has already been removed from the server, because the
lookupcache=positive option I use, keeps the entries valid for a while.
nfs_statfs() returns ESTALE if "file" has already been removed from the
server.
If the user application repeats the statfs("file", &buff) call, we
are stuck: "file" remains young forever in the directory-cache.
Signed-off-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Fix an Oops in the NFSv4 atomic open code
NFS: Fix the selection of security flavours in Kconfig
NFS: fix the return value of nfs_file_fsync()
rpcrdma: Fix SQ size calculation when memreg is FRMR
xprtrdma: Do not truncate iova_start values in frmr registrations.
nfs: Remove redundant NULL check upon kfree()
nfs: Add "lookupcache" to displayed mount options
NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)
Running "cat /proc/mounts" fails to display the "lookupcache" option.
This oversight cost me a bunch of wasted time recently.
The following simple patch fixes it.
CC: stable <stable@kernel.org>
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
Add a flag so we know if we mounted the NFS server using the legacy
binary interface. If we used the legacy interface, then we should not
show the mountd options.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we do not display the minor version mount parameter in the
/proc mount info.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.
- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up: fscache_uniq takes a string, so it should be included
with the other string mount option definitions, by convention.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep a global count of how many referrals that the current task has
traversed on a path lookup. Return ELOOP if the count exceeds
MAX_NESTED_LINKS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
bdi_unregister is called by nfs_put_super which is only called by
generic_shutdown_super if ->s_root is not NULL. So if we error out
in a circumstance where we called nfs_bdi_register (i.e. server !=
NULL) but have not set s_root, then we need to call bdi_unregister
explicitly in nfs_get_sb and various other *_get_sb() functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ensure that we unregister the bdi before kill_anon_super() calls
ida_remove() on our device name.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
This reverts commit e9496ff46a. Quoth Al:
"it's dependent on a lot of other stuff not currently in mainline
and badly broken with current fs/namespace.c. Sorry, badly
out-of-order cherry-pick from old queue.
PS: there's a large pending series reworking the refcounting and
lifetime rules for vfsmounts that will, among other things, allow to
rip a subtree away _without_ dissolving connections in it, to be
garbage-collected when all active references are gone. It's
considerably saner wrt "is the subtree busy" logics, but it's nowhere
near being ready for merge at the moment; this changeset is one of the
things becoming possible with that sucker, but it certainly shouldn't
have been picked during this cycle. My apologies..."
Noticed-by: Eric Paris <eparis@redhat.com>
Requested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the "rsize=" or "wsize=" mount options are not specified,
text-based mounts have slightly different behavior than legacy binary
mounts. Text-based mounts use the smaller of the server's maximum
and the client's maximum, but binary mounts use the smaller of the
server's _preferred_ size and the client's maximum.
This difference is actually pretty subtle. Most servers advertise
the same value as their maximum and their preferred transfer size, so
the end result is the same in most cases.
The reason for this difference is that for text-based mounts, if
r/wsize are not specified, they are set to the largest value supported
by the client. For legacy mounts, the values are set to zero if these
options are not specified.
nfs_server_set_fsinfo() can negotiate the transfer size defaults
correctly in any case. There's no need to specify any particular
value as default in the text-based option parsing logic.
Note that nfs4 doesn't use nfs_server_set_fsinfo(), but the mount.nfs4
command does set rsize and wsize to 0 if the user didn't specify these
options. So, make the same change for text-based NFSv4 mounts.
Thanks to James Pearson <james-p@moving-picture.com> for reporting and
diagnosing the problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Recent changes to snprintf() introduced the %pI6c formatter, which can
display an IPv6 address with standard shorthanding. Use this new
formatter when displaying IPv6 server addresses in /proc/mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Solaris uses netids as values for the proto= option, so that when
someone specifies "tcp6" they get traffic over TCP + IPv6. Until
recently, this has never really been an issue for Linux since it didn't
support NFS over IPv6. The netid and the protocol name were generally
always the same (modulo any strange configuration in /etc/netconfig).
The solaris manpage documents their proto= option as:
proto= _netid_ | rdma
This patch is intended to bring Linux closer to how the Solaris proto=
option works, by declaring a static netid mapping in the kernel and
converting the proto= and mountproto= options to follow it and display
the proper values in /proc/mounts.
Much of this functionality will need to be provided by a userspace
mount.nfs patch. Chuck Lever has a patch to change mount.nfs in
the same way. In principle, we could do *all* of this in userspace but
that would mean that the options in /proc/mounts may not match the
options used by userspace.
The alternative to the static mapping here is to add a mechanism to
upcall to userspace for netid's. I'm not opposed to that option, but
it'll probably mean more overhead (and quite a bit more code). Rather
than shoot for that at first, I figured it was probably better to
start simply.
Comments welcome.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix a (small) memory leak in one of the error paths of the NFS mount
options parsing code.
Regression introduced in 2.6.30 by commit a67d18f (NFS: load the
rpc/rdma transport module automatically).
Reported-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct sockaddr_storage * can safely be used as struct sockaddr *.
Suppress an "incompatible pointer type" warning.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The NFSv4 renew daemon is shared between all active super blocks that refer
to a particular NFS server, so it is wrong to be shutting it down in
nfs4_kill_super every time a super block is destroyed.
This patch therefore kills nfs4_renewd_prepare_shutdown altogether, and
leaves it up to nfs4_shutdown_client() to also shut down the renew daemon
by means of the existing call to nfs4_kill_renewd().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The recent changeset 53a0b9c4c9 (NFS: Replace
nfs_parse_ip_address() with rpc_pton()) broke nfs_remount, since the call
to rpc_pton() will zero out the port number in data->nfs_server.address.
This is actually due to a bug in nfs_remount: it should be looking at the
port number in nfs_server.port instead...
This fixes bug
http://bugzilla.kernel.org/show_bug.cgi?id=14276
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, the port and mount port will both display as 65535 if you do not
specify a port number. That would be wrong...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
With the recent spate of changes, the nfs protocol version will now default
to 2 instead of 3, while the mount protocol version defaults to 3.
The following patch should ensure the defaults are consistent with the
previous defaults of vers=3,proto=tcp,mountvers=3,mountproto=tcp.
This fixes the bug
http://bugzilla.kernel.org/show_bug.cgi?id=14259
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We forget to set nfs_server.protocol in tcp case when old-style binary
options are passed to mount. The thing remains zero and never validated
afterwards. As the result, we hit BUG in fs/nfs/client.c:588.
Breakage has been introduced in NFS: Add nfs_alloc_parsed_mount_data
merged yesterday...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Propagate the NFS 'fsc' mount option through NFS automounts of various types.
This is now required as commit:
commit c02d7adf8c
Author: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Mon Jun 22 15:09:14 2009 -0400
NFSv4: Replace nfs4_path_walk() with VFS path lookup in a private namespace
uses VFS-driven automounting to reach all submounts barring the root, thus
preventing fscaching from being enabled on any submount other than the root.
This patch gets around that by propagating the NFS_OPTION_FSCACHE flag across
automounts. If a uniquifier is supplied to a mount then this is propagated to
all automounts of that mount too.
Signed-off-by: David Howells <dhowells@redhat.com>
[Trond: Fixed up the definition of nfs_fscache_get_super_cookie for the
case of #undef CONFIG_NFS_FSCACHE]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allocating nfs_parsed_mount_data and setting up the defaults is nearly
the same for both nfs and nfs4 mounts.
Both paths seem to use nfs_validate_transport_protocol(), so setting a
default value for nfs_server.protocol ought to be unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep it in the case of the legacy binary mount interface, but purge it from
the nfs_server structure.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Otherwise we could be attempting to flush data for a writeback
thread and bdi that have already disappeared.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().
Note that ->s_bdi assignment is required for proper writeback!
Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
When mounting an "nfs" type file system, recognize "v4," "vers=4," or
"nfsvers=4" mount options, and convert the file system to "nfs4" under
the covers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[trondmy: fixed up binary mount code so it sets the 'version' field too]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Refactor nfs4_get_sb() to allow its guts to be invoked by
nfs_get_sb().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Refactor the part of nfs4_validate_mount_options() that
handles text-based options, so we can call it from the NFSv2/v3
option validation function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The meaning of not specifying the "port=" mount option is different
for "-t nfs" and "-t nfs4" mounts. The default port value for
NFSv2/v3 mounts is 0, but the default for NFSv4 mounts is 2049.
To support "-t nfs -o vers=4", the mount option parser must detect
when "port=" is missing so that the correct default port value can be
set depending on which NFS version is requested.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Some releases of Linux rpc.mountd (nfs-utils 1.1.4 and later) return an
empty auth flavor list if no sec= was specified for the export. This is
notably broken server behavior.
The new auth flavor list checking added in a recent commit rejects this
case. The OpenSolaris client does too.
The broken mountd implementation is already widely deployed. To avoid
a behavioral regression, the kernel's mount client skips flavor checking
(ie reverts to the pre-2.6.32 behavior) if mountd returns an empty
flavor list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Use the common routine now provided in sunrpc.ko for parsing mount
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Commit a14017db added support in the kernel's NFS mount client to
decode the authentication flavor list returned by mountd.
The NFS client can now use this list to determine whether the
authentication flavor requested by the user is actually supported
by the server.
Note we don't actually negotiate the security flavor if none was
specified by the user. Instead, we try to use AUTH_SYS, and fail if
the server does not support it. This prevents us from negotiating
an inappropriate security flavor (some servers list AUTH_NULL first).
If the server does not support AUTH_SYS, the user must provide an
appropriate security flavor by specifying the "sec=" mount option.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Previous logic in the NFS mount parsing code path assumed
auth_flavor_len was set to zero for simple authentication flavors
(like AUTH_UNIX), and 1 for compound flavors (like AUTH_GSS).
At some earlier point (maybe even before the option parsers were
merged?) specific checks for auth_flavor_len being zero were removed
from the functions that validate the mount option that sets the mount
point's authentication flavor.
Since we are populating an array for authentication flavors, the
auth_flavor_len should always be set to the number of flavors. Let's
eliminate some cleverness here, and prepare for new logic that needs
to know the number of flavors in the auth_flavors[] array.
(auth_flavors[] is an array because at some point we want to allow a
list of acceptable authentication flavors to be specified via the sec=
mount option. For now it remains a single element array).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The new minorversion= mount option (commit 3fd5be9e) was merged at
the same time as the recent sloppy parser fixes (commit a5a16bae),
so minorversion= still uses the old value parsing logic.
If the minorversion= option specifies a bogus value, it should fail
with "bad value" not "bad option."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As noted in the previous patch, the NFSv4 client mount code currently
has several limitations. If the mount path contains symlinks, or
referrals, or even if it just contains a '..', then the client code in
nfs4_path_walk() will fail with an error.
This patch replaces the nfs4_path_walk()-based lookup with a helper
function that sets up a private namespace to represent the namespace on the
server, then uses the ordinary VFS and NFS path lookup code to walk down the
mount path in that namespace.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Specifying "port=-5" with the kernel's current mount option parser
generates "unrecognized mount option". If "sloppy" is set, this
causes the mount to succeed and use the default values; the desired
behavior is that, since this is a valid option with an invalid value,
the mount should fail, even with "sloppy."
To properly handle "sloppy" parsing, we need to distinguish between
correct options with invalid values, and incorrect options. We will
need to parse integer values by hand, therefore, and not rely on
match_token().
For instance, these must all fail with "invalid value":
port=12345678
port=-5
port=samuel
and not with "unrecognized option," as they do currently.
Thus, for the sake of match_token() we need to treat the values for
these options as strings, and do the conversion to integers using
strict_strtol().
This is basically the same solution we used for the earlier "retry="
fix (commit ecbb3845), except in this case the kernel actually has to
parse the value, rather than ignore it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ian Kent reports:
"I've noticed a couple of other regressions with the options vers
and proto option of mount.nfs(8).
The commands:
mount -t nfs -o vers=<invalid version> <server>:/<path> /<mountpoint>
mount -t nfs -o proto=<invalid proto> <server>:/<path> /<mountpoint>
both immediately fail.
But if the "-s" option is also used they both succeed with the
mount falling back to defaults (by the look of it).
In the past these failed even when the sloppy option was given, as
I think they should. I believe the sloppy option is meant to allow
the mount command to still function for mount options (for example
in shared autofs maps) that exist on other Unix implementations but
aren't present in the Linux mount.nfs(8). So, an invalid value
specified for a known mount option is different to an unknown mount
option and should fail appropriately."
See RH bugzilla 486266.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Solder xdr_stream-based XDR decoding functions into the in-kernel mountd
client that are more careful about checking data types and watching for
buffer overflows. The new MNT3 decoder includes support for auth-flavor
list decoding.
The "_sz" macro for MNT3 replies was missing the size of the file handle.
I've added this back, and included the size of the auth flavor array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "intr" mount option has been deprecated for a while, but
/proc/mounts continues to display "nointr" whether "intr" or "nointr"
has been specified for a mount point.
Since these options do not have any effect, simply do not display
them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Frees the preallocated backchannel resources that are associated with
this session when the session is destroyed.
A backchannel is currently created once per session. Destroy the backchannel
only when the session is destroyed.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
NFSv4 should just ignore the 'nolock' option. It is an NFSv2/v3 thing...
This fixes the Oops in http://bugzilla.kernel.org/show_bug.cgi?id=13330
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mount -t nfs4 -o minorversion=[0|1] specifies whether to use 4.0 or 4.1.
By default, the minorversion is set to 0.
Signed-off-by: Mike Sager <sager@netapp.com>
[set default minorversion to 0 as per Trond and SteveD's request]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Due to an apparent typo, commit a67d18f89f
(NFS: load the rpc/rdma transport module automatically) lead to the
'proto=' mount option doing a double free, while Opt_mountproto leaks a
string.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add NFS mount options to allow the local caching support to be enabled.
The attached patch makes it possible for the NFS filesystem to be told to make
use of the network filesystem local caching service (FS-Cache).
To be able to use this, a recent nfsutils package is required.
There are three variant NFS mount options that can be added to a mount command
to control caching for a mount. Only the last one specified takes effect:
(*) Adding "fsc" will request caching.
(*) Adding "fsc=<string>" will request caching and also specify a uniquifier.
(*) Adding "nofsc" will disable caching.
For example:
mount warthog:/ /a -o fsc
The cache of a particular superblock (NFS FSID) will be shared between all
mounts of that volume, provided they have the same connection parameters and
are not marked 'nosharecache'.
Where it is otherwise impossible to distinguish superblocks because all the
parameters are identical, but the 'nosharecache' option is supplied, a
uniquifying string must be supplied, else only the first mount will be
permitted to use the cache.
If there's a key collision, then the second mount will disable caching and give
a warning into the kernel log.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Add some new NFS I/O counters for FS-Cache doing things for NFS. A new line is
emitted into /proc/pid/mountstats if caching is enabled that looks like:
fsc: <rok> <rfl> <wok> <wfl> <unc>
Where <rok> is the number of pages read successfully from the cache, <rfl> is
the number of failed page reads against the cache, <wok> is the number of
successful page writes to the cache, <wfl> is the number of failed page writes
to the cache, and <unc> is the number of NFS pages that have been disconnected
from the cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Define and create superblock-level cache index objects (as managed by
nfs_server structs).
Each superblock object is created in a server level index object and is itself
an index into which inode-level objects are inserted.
Ideally there would be one superblock-level object per server, and the former
would be folded into the latter; however, since the "nosharecache" option
exists this isn't possible.
The superblock object key is a sequence consisting of:
(1) Certain superblock s_flags.
(2) Various connection parameters that serve to distinguish superblocks for
sget().
(3) The volume FSID.
(4) The security flavour.
(5) The uniquifier length.
(6) The uniquifier text. This is normally an empty string, unless the fsc=xyz
mount option was used to explicitly specify a uniquifier.
The key blob is of variable length, depending on the length of (6).
The superblock object is given no coherency data to carry in the auxiliary data
permitted by the cache. It is assumed that the superblock is always coherent.
This patch also adds uniquification handling such that two otherwise identical
superblocks, at least one of which is marked "nosharecache", won't end up
trying to share the on-disk cache. It will be possible to manually provide a
uniquifier through a mount option with a later patch to avoid the error
otherwise produced.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
When mounting an NFS/RDMA server with the "-o proto=rdma" or
"-o rdma" options, attempt to dynamically load the necessary
"xprtrdma" client transport module. Doing so improves usability,
while avoiding a static module dependency and any unnecesary
resources.
Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a flag to mark delegations as requiring return, then run a garbage
collector. In the future, this will allow for more flexible delegation
management, where delegations may be marked for return if it turns out
that they are not being referenced.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the admin has specified the "noresvport" option for an NFS mount
point, the kernel's NFS client uses an unprivileged source port for
the main NFS transport. The kernel's mountd client should use an
unprivileged port in this case as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The standard default security setting for NFS is AUTH_SYS. An NFS
client connects to NFS servers via a privileged source port and a
fixed standard destination port (2049). The client sends raw uid and
gid numbers to identify users making NFS requests, and the server
assumes an appropriate authority on the client has vetted these
values because the source port is privileged.
On Linux, by default in-kernel RPC services use a privileged port in
the range between 650 and 1023 to avoid using source ports of well-
known IP services. Using such a small range limits the number of NFS
mount points and the number of unique NFS servers to which a client
can connect concurrently.
An NFS client can use unprivileged source ports to expand the range of
source port numbers, allowing more concurrent server connections and
more NFS mount points. Servers must explicitly allow NFS connections
from unprivileged ports for this to work.
In the past, bumping the value of the sunrpc.max_resvport sysctl on
the client would permit the NFS client to use unprivileged ports.
Bumping this setting also changes the maximum port number used by
other in-kernel RPC services, some of which still required a port
number less than 1023.
This is exacerbated by the way source port numbers are chosen by the
Linux RPC client, which starts at the top of the range and works
downwards. It means that bumping the maximum means all RPC services
requesting a source port will likely get an unprivileged port instead
of a privileged one.
Changing this setting effects all NFS mount points on a client. A
sysadmin could not selectively choose which mount points would use
non-privileged ports and which could not.
Lastly, this mechanism of expanding the limit on the number of NFS
mount points was entirely undocumented.
To address the need for the NFS client to use a large range of source
ports without interfering with the activity of other in-kernel RPC
services, we introduce a new NFS mount option. This option explicitly
tells only the NFS client to use a non-privileged source port when
communicating with the NFS server for one specific mount point.
This new mount option is called "resvport," like the similar NFS mount
option on FreeBSD and Mac OS X. A sister patch for nfs-utils will be
submitted that documents this new option in nfs(5).
The default setting for this new mount option requires the NFS client
to use a privileged port, as before. Explicitly specifying the
"noresvport" mount option allows the NFS client to use an unprivileged
source port for this mount point when connecting to the NFS server
port.
This mount option is supported only for text-based NFS mounts.
[ Sidebar: it is widely known that security mechanisms based on the
use of privileged source ports are ineffective. However, the NFS
client can combine the use of unprivileged ports with the use of
secure authentication mechanisms, such as Kerberos. This allows a
large number of connections and mount points while ensuring a useful
level of security.
Eventually we may change the default setting for this option
depending on the security flavor used for the mount. For example,
if the mount is using only AUTH_SYS, then the default setting will
be "resvport;" if the mount is using a strong security flavor such
as krb5, the default setting will be "noresvport." ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Trond.Myklebust@netapp.com: Fixed a bug whereby nfs4_init_client()
was being called with incorrect arguments.]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: convert nfs_mount() to take a single data structure argument to make
it simpler to add more arguments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The iscsi_ibft.c changes are almost certainly a bugfix as the
pointer 'ip' is a u8 *, so they never print the last 8 bytes
of the IPv6 address, and the eight bytes they do print have
a zero byte with them in each 16-bit word.
Other than that, this should cause no difference in functionality.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bruce observed that nfs_parse_ip_address() will successfully parse an
IPv6 address that looks like this:
"::1%"
A scope delimiter is present, but there is no scope ID following it.
This is harmless, as it would simply set the scope ID to zero. However,
in some cases we would like to flag this as an improperly formed
address.
We are now also careful to reject addresses where garbage follows the
address (up to the length of the string), instead of ignoring the
non-address characters; and where the scope ID is nonsense (not a valid
device name, but also not numeric). Before, both of these cases would
result in a harmless zero scope ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The code incorrectly assumes here that the server name (or ip address)
is null-terminated. This can cause referrals to fail in some cases.
Also support ipv6 addresses.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We plan to use this function elsewhere.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The point of introducing text-based mounts was to allow us to add
functionality without having to worry about legacy binary mount formats.
The mask should be there in order to ensure that binary formats don't start
enabling features that they cannot support. There is no justification for
applying it to the text mount path.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of causing umount requests to block on server->active_wq while the
asynchronous sillyrename deletes are executing, we can use the sb->s_active
counter to obtain a reference to the super_block, and then release that
reference in nfs_async_unlink_release().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Automounter maps can contain mount options valid for other NFS
implementations but not for Linux. The Linux automounter uses the
mount command's "-s" command line option ("s" for "sloppy") so that
mount requests containing such options are not rejected.
Commit f45663ce5f attempted to address a
known regression with text-based NFS mount option parsing. Unrecognized
mount options would cause mount requests to fail, even if the "-s"
option was used on the mount command line.
Unfortunately, this commit was not complete as submitted. It adds a
new mount option, "sloppy". But it is missing a hunk, so it now allows
NFS mounts with unrecognized mount options, even if the "sloppy" option
is not present. This could be a problem if a required critical mount
option such as "sync" is misspelled, for example, and is considered a
regression from 2.6.26.
This patch restores the missing hunk. Now, the default behavior of
text-based NFS mount options is as before: any unrecognized mount option
will cause the mount to fail.
Please include this in 2.6.27-rc.
Thanks to Neil Brown for reporting this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel's NFS client mount option parser currently doesn't allow
unrecognized or incorrect mount options. This prevents misspellings or
incorrectly specified mount options from possibly causing silent data
corruption.
However, NFS mount options are not standardized, so different operating
systems can use differently spelled mount options to support similar
features, or can support mount options which no other operating system
supports.
"Sloppy" mount option parsing, which allows the parser to ignore any
option it doesn't recognize, is needed to support automounters that often
use maps that are shared between heterogenous operating systems.
The legacy mount command ignores the validity of the values of mount
options entirely, except for the "sec=" and "proto=" options. If an
incorrect value is specified, the out-of-range value is passed to the
kernel; if a value is specified that contains non-numeric characters,
it appears as though the legacy mount command sets that option to zero
(probably incorrect behavior in general).
In any case, this sets a precedent which we will partially follow for
the kernel mount option parser:
+ if "sloppy" is not set, the parser will be strict about both
unrecognized options (same as legacy) and invalid option
values (stricter than legacy)
+ if "sloppy" is set, the parser will ignore unrecognized
options and invalid option values (same as legacy)
An "invalid" option value in this case means that either the type
(integer, short, or string) or sign (for integer values) of the specified
value is incorrect.
This patch does two things: it changes the NFS client's mount option
parsing loop so that it parses the whole string instead of failing at
the first unrecognized option or invalid option value. An unrecognized
option or an invalid option value cause the option to be skipped.
Then, the patch adds a "sloppy" mount option that allows the parsing
to succeed anyway if there were any problems during parsing. When
parsing a set of options is complete, if there are errors and "sloppy"
was specified, return success anyway. Otherwise, only return success
if there are no errors.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the default security flavor when we set the other mount option
default values for NFSv4. This cleans up the NFSv4 mount option parsing
path to look like the NFSv2/v3 one.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set the default security flavor when we set the other mount option default
values. After this change, only the legacy user-space mount path needs to
set the NFS_MOUNT_SECFLAVOUR flag.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Refactor the NFS mount option parsing function to extract the
security flavor parsing logic into a separate function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The remount path does not need to set the port in the server address.
Since it's not really a part of option parsing, move the nfs_set_port()
call to nfs_parse_mount_options()'s callers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the UDP/TCP default timeo/retrans settings for text mounts to
nfs_init_timeout_values(), which was were they were always being
initialised (and sanity checked) for binary mounts.
Document the default timeout values using appropriate #defines.
Ensure that we initialise and sanity check the transport protocols that
may have been specified by the user.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support in the kernel NFS client's address parser for interface
identifiers.
IPv6 link-local addresses require an additional "interface identifier",
which is a network device name or an integer that indexes the array of
local network interfaces. They are suffixed to the address with a '%'.
For example:
fe80::215:c5ff:fe3b:e1b2%2
indicates an interface index of 2. Or
fe80::215:c5ff:fe3b:e1b2%eth0
indicates that requests should be routed through the eth0 device.
Without the interface ID, link-local addresses are not usable for NFS.
Both the kernel NFS client mount option parser and the mount.nfs command
can take either form. The mount.nfs command always passes the address
through getnameinfo(3), which usually re-writes interface indices as
device names.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To make nfs_parse_server_address() more generally useful, allow it to
accept input strings that are not terminated with '\0'.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Traditionally the mount command has looked for a ":" to separate the
server's hostname from the export path in the mounted on device name,
like this:
mount server:/export /mounted/on/dir
The server's hostname is "server" and the export path is "/export".
You can also substitute a specific IPv4 network address for the server
hostname, like this:
mount 192.168.0.55:/export /mounted/on/dir
Raw IPv6 addresses present a problem, however, because they look
something like this:
fe80::200:5aff:fe00:30b
Note the use of colons.
To get around the presence of colons, copy the Solaris convention used for
mounting IPv6 servers by address: wrap a raw IPv6 address with square
brackets.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To support passing a raw IPv6 address as a server hostname, we need to
expand the logic that handles splitting the passed-in device name into
a server hostname and export path
Start by pulling device name parsing out of the mount option validation
functions and into separate helper functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix the 'nfs4_fs_type' undeclared error in nfs_remount when compiling sans
NFSv4...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Jeff Layton <jlayton@redhat.com>
Clean up: the "intr" and "nointr" mount options were recently retired.
Document this in the NFS mount option parser.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The kernel NFS mount option parser should ignore the retry= mount option
since it is meaningful only in user space. Today it expects a number
rather than arbitrary text, so it ignores the option if the value is
numeric, but chokes if there are other characters in the value.
Change it to allow any text (except ",") as its value.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When remounting an NFS or NFS4 filesystem, the new NFS options are not
respected, yet the remount will still return success. This patch adds
a remount_fs sb op for NFS that checks any new nfs mount options against
the existing ones and fails the mount if any have changed.
This is only implemented for string-based mount options since doing
this with binary options isn't really feasible.
This is essentially the same as the original patch I sent out, but
adds a check to see if the addr= option has changed.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix a sign issue in xdr_decode_fhstatus3()
Fix incorrect comparison in nfs_validate_mount_data()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv3 get_sb operations call into the LSM layer to set security options passed
from userspace. NFSv4 hooks were not originally added since it was reasonably
late in the merge window and NFSv3 was the only thing that had regressed (v4
has never supported any LSM options)
This patch makes NFSv4 call into the LSM to set security options rather than
just blindly dropping them with no notice to the user as happens today. This
patch was tested in a simple NFSv4 environment with the context= option and
appeared to work as expected.
Signed-off-by: Eric Paris <eparis@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Register NFS' backing_dev_info under sysfs with the name "nfs-MAJOR:MINOR"
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is possible NULL pointer dereference if kstr[n]dup failed.
So fix them for safety.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
... and take it out of ->umount_begin() instances. Call with all locks
already taken (by do_umount()) and leave calling release_mounts() to
caller (it will do release_mounts() anyway, so we can just put into
the same list).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Display all mount options in /proc/mount which may be needed to reconstruct
a previous mount.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
During a remount based on the mount options displayed in /proc/mounts, we
want to preserve the original behavior of the mount request. Let's save
the original setting of the "port=" mount option in the mount's nfs_server
structure.
This allows us to simplify the default behavior of port setting for NFSv4
mounts: by default, NFSv2/3 mounts first try an RPC bind to determine the
NFS server's port, unless the user specified the "port=" mount option;
Users can force the client to skip the RPC bind by explicitly specifying
"port=<value>".
NFSv4, by contrast, assumes the NFS server port is 2049 and skips the RPC
bind, unless the user specifies "port=". Users can force an RPC bind for
NFSv4 by explicitly specifying "port=0".
I added a couple of extra comments to clarify this behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: use %u instead of %d when displaying NFS mount options.
Nit: Fix reporting of "namlen=" option in nfs_show_mount_stats. The mount
option is called "namlen" without the "e".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS and SELinux worked together previously because SELinux had NFS
specific knowledge built in. This design was approved by both groups
back in 2004 but the recent NFS changes to use nfs_parsed_mount_data and
the usage of nfs_clone_mount_data showed this to be a poor fragile
solution. This patch fixes the NFS functionality regression by making
use of the new LSM interfaces to allow an FS to explicitly set its own
mount options.
The explicit setting of mount options is done in the nfs get_sb
functions which are called before the generic vfs hooks try to set mount
options for filesystems which use text mount data.
This does not currently support NFSv4 as that functionality did not
exist in previous kernels and thus there is no regression. I will be
adding the needed code, which I believe to be the exact same as the v3
code, in nfs4_get_sb for 2.6.26.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: James Morris <jmorris@namei.org>
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
David Howells noticed that repeating the same mount option twice during an
NFS mount request can result in orphaned memory in certain cases.
Only the client_address and mount_server.hostname strings are initialized
in the mount parsing loop, so those appear to be the only two pointers that
might be written over by repeating a mount option. The strings in the
nfs_server section of the nfs_parsed_mount_data structure are set only once
after the options are parsed, thus these are not susceptible to being
overwritten.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that the needed IPv6 infrastructure is in place, allow the NFS client's
IP address parser to generate AF_INET6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace the nfs_server and mount_server address fields in the
nfs_parsed_mount_data structure with a "struct sockaddr_storage"
instead of a "struct sockaddr_in".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor the logic to parse incoming text-based IP addresses. Use the
in4_pton() function instead of the older in_aton(), following the lead
of the in-kernel CIFS client.
Later we'll add IPv6 address parsing using the matching in6_pton()
function. For now we can't allow IPv6 address parsing: we must expand
the size of the address storage fields in the nfs_parsed_mount_options
struct before we can parse and store IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the name of address family compatibility, we can't have the NIP_FMT and
NIPQUAD macros in nfs_try_mount(). Instead, we can make use of an unused
mount option to display the mount server's hostname.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a helper function to set the default NFS port for NFSv4 mount
points. The helper supports both AF_INET and AF_INET6 family addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We'll need to set the port number of an AF_INET or AF_INET6 address in
several places in fs/nfs/super.c, so introduce a helper that can manage
this for us. We put this helper to immediate use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support to nfs_verify_server_address for recognizing AF_INET6
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor nfs_compare_super() and add AF_INET6 support.
Replace the generic memcmp() to document explicitly what parts of the
addresses must match in this check, and make the comparison independent
of the lengths of both addresses.
A side benefit is both tests are more computationally efficient than a
memcmp().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To ensure the NFS client displays IPv6 addresses properly, replace
address family-specific NIPQUAD() invocations with a call to the RPC
client to get a formatted string representing the remote peer's
address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: mount option parsing uses kstrndup in several places, rather than
using kzalloc. Replace the few remaining uses of kzalloc with kstrndup,
for consistency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the mount option that allows users to specify an alternate mountd
program number. The client hasn't support setting an alternate mountd
program number for a very long time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the mount option that allows users to specify an alternate NFS
program number. The client hasn't support setting an alternate NFS
program number for a very long time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Text-based mount option parsing introduced a minor regression in the
behavior of NFS version 4 mounts. NFS version 4 is not supposed to require
a running rpcbind service on the server in order for a mount to succeed.
In other words, if the mount options don't specify a port number, the port
number is supposed to default to 2049. For earlier versions of NFS, the
default port number was zero in order to cause the RPC client to autobind
to the server's NFS service.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Added an active/deactive mechanism to the nfs_server structure
allowing async operations to hold off umount until the
operations are done.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Sigh... commit 4584f520e1 (NFS: Fix NFS
mountpoint crossing...) had a slight flaw: server can be NULL if sget()
returned an existing superblock.
Fix the fix by dereferencing s->s_fs_info.
Thanks to Coverity/Adrian Bunk and Frank Filz for spotting the bug.
(See http://bugzilla.kernel.org/show_bug.cgi?id=9647)
Also add in the same namespace Oops fix for NFSv4 in both the mountpoint
crossing case, and the referral case.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The check that was added to nfs_xdev_get_sb() to work around broken
servers, works fine for NFSv2, but causes mountpoint crossing on NFSv3 to
always return ESTALE.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr'
mount option. We have to use _killable everywhere instead of _interruptible
as we get rid of rpc_clnt_sigmask/sigunmask.
Signed-off-by: Liam R. Howlett <howlett@gmail.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
While testing a kernel based upon ecd744eec3
(with wrong boot arguments), I got the following bad page state entry while
NFS was trying to mount it's rootfs:
IP-Config: Complete:
device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.101, domain=, nis-domain=(none),
bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.100
rpcbind: server 192.168.1.100 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.100
rpcbind: server 192.168.1.100 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.1.100 not responding, timed out
Root-NFS: Server returned error -5 while mounting /nfs/rootfs/
VFS: Unable to mount root fs via NFS, trying floppy.
Bad page state in process 'swapper'
page:c02b1260 flags:0x00000400 mapping:00000000 mapcount:0 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
[<c0023e34>] (dump_stack+0x0/0x14) from [<c0062570>] (bad_page+0x70/0xac)
[<c0062500>] (bad_page+0x0/0xac) from [<c0064914>] (free_hot_cold_page+0x80/0x178)
[<c0064894>] (free_hot_cold_page+0x0/0x178) from [<c0064a74>] (free_hot_page+0x14/0x18)
[<c0064a60>] (free_hot_page+0x0/0x18) from [<c0067078>] (put_page+0xf8/0x154)
[<c0066f80>] (put_page+0x0/0x154) from [<c007dbc8>] (kfree+0xc8/0xd0)
[<c007db00>] (kfree+0x0/0xd0) from [<c00cbb54>] (nfs_get_sb+0x230/0x710)
[<c00cb924>] (nfs_get_sb+0x0/0x710) from [<c0084334>] (vfs_kern_mount+0x58/0xac)[<c00842dc>] (vfs_kern_mount+0x0/0xac) from [<c00843c0>] (do_kern_mount+0x38/0xf4)
[<c0084388>] (do_kern_mount+0x0/0xf4) from [<c0099c7c>] (do_mount+0x1e8/0x614)
...
This seems to be caused by use of an uninitialised structure due to NULL
options being passed to nfs_validate_mount_data(). Ensure that the
parsed mount data is always initialised.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
(Trond: added fix for the same bug in nfs4_validate_mount_data()).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi Trond,
I have discovered that the BUG_ON in nfs_follow_mountpoint:
BUG_ON(IS_ROOT(dentry));
can be triggered by a misbehaving server.
What happens is the client does a lookup and discoveres that the named
directory has a different fsid, so it initiates a mount.
It then performs a GETATTR on the mounted directory and gets a
different fsid again (due to a bug in the NFS server).
This causes nfs_follow_mountpoint to be called on the newly mounted
root, which triggers the BUG_ON.
To duplicate this, have a directory which contains some mountpoints,
and export that directory with the "crossmnt" flag using nfs-utils
1.1.1 (or 1.1.0 I think)
The GETATTR on the root of the mounted filesystem will return the
information for the top exportpoint, while a lookup will return the
correct information. This difference causes the NFS client to BUG.
I think the best way to fix this is to trap this possibility early, so
just before completing the mount in the NFS client, check that it isn't
going to use nfs_mountpoint_inode_operations.
As long as i_op will never change once set (is that true?), this
should be adequately safe.
The following patch shows a possible approach, and it works for me.
i.e. when the NFS server is misbehaving, I get ESTALE on those
mountpoints, while when the NFS server is working correctly, I get
correct behaviour on the client.
NeilBrown
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The default "intr" setting is different for NFS and NFSv4. To avoid
confusion on this issue, don't hide the "nointr" option in /proc/mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Re-order mount option sanity checking slightly to ensure we have a valid
server address *before* trying to do the mountd RPC call.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds hooks to the string-based NFS mount to support an "rdma" protocol option.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the per-transport strings to display the transport protocol accurately.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of an { address family, raw IP protocol number }-tuple, use the
newly-defined RPC identifier when creating clients in the upper layers.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The previous patch introduced a bug when copying the server address.
Also clarify a copy into the auth_flavours array: currently the two
size calculations are equivalent, but we may decide to change the size
of auth_flavors[] at some point.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The user-visible nfs4_mount_data does not contain sufficient data to
describe new mount options, and also is now a legacy structure. Replace
it with the internal nfs_parsed_mount_data for nfsv4 in-kernel use.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The user-visible nfs_mount_data does not contain sufficient data to
describe new mount options, and also is now a legacy structure. Replace
it with the internal nfs_parsed_mount_data for nfsv[23] in-kernel use.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In preparation for rearranging the nfs mount argument passing, make the
nfs_parsed_mount_data struct visible across nfs kernel files.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I got the 'mounthost=' option wrong - it shouldn't look for an address
value, but rather a hostname value. However, the in-kernel mount client
and NFS client cannot resolve a hostname by themselves; they rely on
user-land to pass in the resolved address.
Create a new mount option that does take an address so that the mount
program's address can be passed in. The mount hostname is now ignored
by the kernel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If no mount server port number is specified, the previous change to the
kernel mount client inadvertently allows the NFS server's port number to be
the used as the mount server's port number. If the user specifies an NFS
server port (-o port=x), the mount will fail.
The fix below sets the mount server's port to 0 if no mount server
port is specified by the user.
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Simplify the in-kernel mount client by using autobind instead of an
explicit call to rpc_getport_sync.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A minor thing, but useful when working with a server with multiple
addrs. This looks like it might also be necessary if Miklos' effort
to eliminate /etc/mtab ever comes to fruition.
When displaying mount options in /proc/mounts, the kernel prints
"addr=hostname". This info is redundant since we already have the
hostname displayed as part of the "device" section of the mount. This
patch changes it to display the IP address to which the socket is
connected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
According to the mount(2) man page, the proper error return code for the
mount(2) system call when the special device name or the mounted-on
directory name is too long is ENAMETOOLONG.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The hostname was getting truncated in the new text-based NFS mount API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Don't filter the return code from the in-kernel rpcbind or NFS mount
clients. Return the real error code so that callers of the new NFS
text-based mount API can apply a useful retry strategy.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The new text-based NFS mount option parsing logic doesn't recognize any
valid transport protocols due to a silly mistake in the protocol token
matching logic. This prevents basic mount requests such as:
mount.nfs server:/export /mnt -o proto=tcp
from working with the new text-based NFS mount API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This avoids the recent NFS mount regression (returning EBUSY when
mounting the same filesystem twice with different parameters).
The best I can do given the constraints appears to be to have the kernel
first look for a superblock that matches both the fsid and the
user-specified mount options, and then spawn off a new superblock if
that search fails.
Note that this is not the same as specifying nosharecache everywhere
since nosharecache will never attempt to match an existing superblock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Hua Zhong <hzhong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Obviously broken on little-endian; fortunately, the option is not
frequently used...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Hey, sparse is wonderful, but even better than sparse is having people
like Al that actually _run_ it and fix bugs using it. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a NFSv4 mount is attempted with string based options, and the
option string doesn't contain a clientaddr= option, the kernel will
currently oops. Check for this situation and return a proper error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I can never remember what the function to register to receive VM pressure
is called. I have to trace down from __alloc_pages() to find it.
It's called "set_shrinker()", and it needs Your Help.
1) Don't hide struct shrinker. It contains no magic.
2) Don't allocate "struct shrinker". It's not helpful.
3) Call them "register_shrinker" and "unregister_shrinker".
4) Call the function "shrink" not "shrinker".
5) Reduce the 17 lines of waffly comments to 13, but document it properly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: David Chinner <dgc@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unless the user sets the NFS_MOUNT_NOSHAREDCACHE mount flag, we should
return EBUSY if the filesystem is already mounted on a superblock that
has set conflicting mount options.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prior to David Howell's mount changes in 2.6.18, users who mounted
different directories which happened to be from the same filesystem on the
server would get different super blocks, and hence could choose different
mount options. As long as there were no hard linked files that crossed from
one subtree to another, this was quite safe.
Post the changes, if the two directories are on the same filesystem (have
the same 'fsid'), they will share the same super block, and hence the same
mount options.
Add a flag to allow users to elect not to share the NFS super block with
another mount point, even if the fsids are the same. This will allow
users to set different mount options for the two different super blocks, as
was previously possible. It is still up to the user to ensure that there
are no cache coherency issues when doing this, however the default
behaviour will be to share super blocks whenever two paths result in
the same fsid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hook in final components required for supporting in-kernel mount option
parsing for NFSv2 and NFSv3 mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For NFSv2 and v3 mounts, the first step is to contact the server's MOUNTD
and request the file handle for the root of the mounted share. Add a
function to the NFS client that handles this operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This generic infrastructure works for both NFS and NFSv4 mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor NFSv4 mount processing to break out mount data validation
in the same way it's broken out in the NFSv2/v3 mount path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move error handling code out of the main code path. The switch statement
was also improperly indented, according to Documentation/CodingStyle. This
prepares nfs_validate_mount_data for the addition of option string parsing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS and NFSv4 mounts can now share server address sanity checking. And, it
provides an easy mechanism for adding IPv6 address checking at some later
point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
/home/cel/linux/fs/nfs/super.c: In function 'nfs_pseudoflavour_to_name':
/home/cel/linux/fs/nfs/super.c:270: warning: comparison between signed and unsigned
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The error return logic in nfs_get_sb now matches nfs4_get_sb, and is more maintainable.
A subsequent patch will take advantage of this simplification.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The new string utility function strndup_user can be used instead of
nfs_copy_user_string, eliminating an unnecessary duplication of function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
READDIRPLUS can be a performance hindrance when the client is working with
large directories. In addition, some servers still have bugs in their
implementations (e.g. Tru64 returns wrong values for the fsid).
Add a mount flag to enable users to turn it off at mount time following the
implementation in Apple's NFS client.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs statfs function returns a success code on error, and fills the
output buffer with invalid values. The attached patch makes it return a
correct error code instead.
Signed-off-by: Amnon Aaronsohn <amnonaar@gmail.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(Modified patch to reinstate the dprintk())
The current NFS client congestion logic is severly broken, it marks the
backing device congested during each nfs_writepages() call but doesn't
mirror this in nfs_writepage() which makes for deadlocks. Also it
implements its own waitqueue.
Replace this by a more regular congestion implementation that puts a cap on
the number of active writeback pages and uses the bdi congestion waitqueue.
Also always use an interruptible wait since it makes sense to be able to
SIGKILL the process even for mounts without 'intr'.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".
Compile tested with gcc & sparse.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NFS_SUPER_MAGIC is already defined in include/linux/magic.h
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rob Landley