Switch ports will want to act as Boundary Clocks, which are configured
using ptp4l by specifying the "-i" argument multiple times.
Since we track a log file and a pid file for each ptp4l instance, and we
want to be compatible with the existing single-port callers of
ptp4l_start and ptp4l_stop, pass the interface list as a single string
of space-separated values. Based on this, we create a label for each
ptp4l instance, where the spaces are replaced with underscores
(ptp4l_start "eth0 eth1" generates "ptp4l_pid_eth0_eth1").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra_args argument ($3) of isochron_recv_start is overwritten with
uds ($2), if that argument exists.
This is currently not a problem, because the only TSN selftest
(ocelot/psfp.sh) omits remote sync so it does not specify to the
receiver a UNIX domain socket for ptp4l. So $uds is currently an empty
string.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220922070438.586692-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SPI devices use the spi_device_id for module autoloading even on
systems using device tree, after commit 5fa6863ba6 ("spi: Check
we have a spi_device_id for each DT compatible"), kernel warns as
follows since the spi_device_id is missing:
SPI driver mse102x has no spi_device_id for vertexcom,mse1021
SPI driver mse102x has no spi_device_id for vertexcom,mse1022
Add spi_device_id entries to silence the warnings, and ensure driver
module autoloading works.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922065717.1448498-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of error, the function get_phy_device() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20220922021023.811581-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arun Ramadoss says:
====================
net: dsa: microchip: ksz9477: enable interrupt for internal phy link detection
This patch series implements the common interrupt handling for ksz9477 based
switches and lan937x. The ksz9477 and lan937x has similar interrupt registers
except ksz9477 has 4 port based interrupts whereas lan937x has 6 interrupts.
The patch moves the phy interrupt hanler implemented in lan937x_main.c to
ksz_common.c, along with the mdio_register functionality.
====================
Link: https://lore.kernel.org/r/20220922071028.18012-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Config_intr and handle_interrupt are enabled for ksz9477 phy. It is
similar to all other phys in the micrel phys.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global port interrupt routines and individual ports interrupt
routines has similar implementation except the mask & status register
and number of nested irqs in them. The mask & status register and
pointer to ksz_device is added to ksz_irq and uses the ksz_irq as
irq_chip_data.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support the phy link detection through interrupt method for ksz9477
based switch, the interrupt handling routines are moved from
lan937x_main.c to ksz_common.c. The only changes made are functions
names are prefixed with ksz_ instead of lan937x_.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, if the mdio node is not present in the dts file then
lan937x_mdio_register return -ENODEV and entire probing process fails.
To make the mdio_register generic for all ksz series switches and to
maintain back-compatibility with existing dts file, return -ENODEV is
replaced with return 0.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the lan937x_mdio_register function, phy interrupts are enabled
irrespective of irq is enabled in the switch. Now, the check is added to
enable the phy interrupt only if the irq is enabled in the switch.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the number of port irqs is hard coded for the lan937x switch
as 6. In order to make the generic interrupt handler for ksz switches,
number of port irq supported by the switch is added to the
ksz_chip_data. It is 4 for ksz9477, 2 for ksz9897 and 3 for ksz9567.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_dev_notifier() subscribes to netdev state changes in order to
determine whether interfaces which have a taprio root qdisc have changed
their link speed, so the internal calculations can be adapted properly.
The 'qdev' temporary variable serves no purpose, because we just use it
only once, and can just as well use qdisc_dev(q->root) directly (or the
"dev" that comes from the netdev notifier; this is because qdev is only
interesting if it was the subject of the state change, _and_ its root
qdisc belongs in the taprio list).
The 'found' variable also doesn't really serve too much of a purpose
either; we can just call taprio_set_picos_per_byte() within the loop,
and exit immediately afterwards.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All uses of dst_hold_and_use() have
been removed since commit 1202cdd665 ("Remove DECnet support
from kernel"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All uses of sk_nulls_node_init() have
been removed since commit dbca1596bb ("ping: convert to RCU
lookups, get rid of rwlock"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All uses of neigh_key_eq16() have
been removed since commit 1202cdd665 ("Remove DECnet support
from kernel"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove all the code about SFTR-V2 Register which have been
deprecated since commit 77b7f83d5c ("mlxsw: Enable unified
bridge model").
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out during review, currently the following set of commands
crashes the kernel:
$ ip netns add ns0
$ ip link set swp0 netns ns0
$ ip netns del ns0
WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec
Workqueue: netns cleanup_net
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : unregister_netdevice_many+0xaa4/0xaec
lr : unregister_netdevice_many+0x700/0xaec
Call trace:
unregister_netdevice_many+0xaa4/0xaec
default_device_exit_batch+0x294/0x340
ops_exit_list+0xac/0xc4
cleanup_net+0x2e4/0x544
process_one_work+0x4ec/0xb40
---[ end trace 0000000000000000 ]---
unregister_netdevice: waiting for swp0 to become free. Usage count = 2
This is because since DSA user ports, since they started populating
dev->rtnl_link_ops in the blamed commit, gained a different treatment
from default_device_exit_net(), which thinks these interfaces can now be
unregistered.
They can't; so set netns_refund = true to restore the behavior prior to
populating dev->rtnl_link_ops.
Fixes: 95f510d0b7 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220921185428.1767001-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When
discussing page_pool code we realised/remembered certain optimizations
had not been fully utilised.
Since commit c07aea3ef4 ("mm: add a signature in struct page") struct
page have a direct pointer to the page_pool object this page was
allocated from.
Thus, with this info it is possible to skip the rhashtable_lookup to
find the page_pool object in __xdp_return().
The rcu_read_lock can be removed as it was tied to xdp_mem_allocator.
The page_pool object is still safe to access as it tracks inflight pages
and (potentially) schedules final release from a work queue.
Created a micro benchmark of XDP redirecting from mlx5 into veth with
XDP_DROP bpf-prog on the peer veth device. This increased performance
6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec
(27 cycles at 3.8GHz) less per packet.
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/166377993287.1737053.10258297257583703949.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RV1126 has GMAC 10/100/1000M ethernet controller
via RGMII and RMII interfaces are configured via M0 and M1 pinmux.
This patch adds rv1126 support by adding delay lines of M0 and M1
simultaneously.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Link: https://lore.kernel.org/r/20220920140944.2535-2-anand@edgeble.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add compatible string for RV1126 gmac, and constrain it to
be compatible with Synopsys dwmac 4.20a.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20220920140944.2535-1-anand@edgeble.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to udp_read_skb(), delete the unnecessary while loop in
unix_read_skb() for readability. Since recv_actor() cannot return a
value greater than skb->len (see sk_psock_verdict_recv()), remove the
redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete the unnecessary while loop in udp_read_skb() for readability.
Additionally, since recv_actor() cannot return a value greater than
skb->len (see sk_psock_verdict_recv()), remove the redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/343b5d8090a3eb764068e9f1d392939e2b423747.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0a28bfd497 added a metadata_dst to each tx_sc, but that's
only allocated when macsec_add_dev has run, which happens after device
registration. If the requested or computed SCI already exists, or if
linking to the lower device fails, we will panic because
metadata_dst_free can't handle NULL.
Reproducer:
ip link add link $lower type macsec
ip link add link $lower type macsec
Fixes: 0a28bfd497 ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/60f2a1965fe553e2cade9472407d0fafff8de8ce.1663923580.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Blamed commit added a txhash parameter to tcp_v6_send_response()
but forgot to update tcp_v6_send_reset() accordingly.
Fixes: aa51b80e1a ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder says:
====================
net: ipa: another set of cleanups
This series contains another set of cleanups done in preparation for
an upcoming series that reworks how IPA registers and their fields
are defined.
The first replaces the use of u32_replace_bits() with a simple
logical AND operation in two places.
The second creates a new function to encapsulate some common code,
and renames another for consistency. The third restructures two
other functions that do similar things to make their similarity more
obvious.
The fourth defines the flag bits in a register using an enumerated
type. And the fifth updates "ipa_reg.h" so the values assigned to
enumerated type members are aligned consistently.
The last three encapsulate the code that assigns values to a few
registers into separate functions.
====================
Link: https://lore.kernel.org/r/20220922222100.2543621-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function that encapsulates setting the BCR, TX_CFG, and
CLKON_CFG register values during hardware configuration.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function that encapsulates setting the counter
configuration register value for versions prior to IPA v4.5.
Create another small function to represent configuring hardware
timing regardless of version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function that encapsulates setting the register flag
that disables filter and routing table hashing for IPA v4.2.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update a few enumerated type definitions in "ipa_reg.h" so that the
values assigned to each member align on the same column. Where a
"TX" or "RX" (or both) comment is present, move that annotation into
a separate comment between the member name and its value.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The backward compatibility register (BCR) has a set of bit flags
that indicate ways in which the IPA hardware should operate in a
backward compatible way. The register is not supported starting
with IPA v4.5, and where it is supported, defined bits all have the
same numeric value.
Redefine these flags using an enumerated type, with each member's
value representing the bit position that encodes it in the BCR.
This replaces all of the single-bit field masks previously defined.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both aggr_time_limit_encode() and hol_block_timer_encode() figure
out how to encode a millisecond time value so it can be programmed
into a register. Rearranging them a bit can make their similarity
more obvious, with both taking essentially the same form.
To do this:
- Return 0 immediately in aggr_time_limit_encode() if the
microseconds value supplied is zero.
- Reverse the test at top of aggr_time_limit_encode(), so we
compute and return the Qtime value in the "true" block,
and compute the result the old way otherwise.
- Open-code (and eliminate) hol_block_timer_qtime_encode() at the
top of hol_block_timer_encode() in the case we use Qtimer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new function ipa_qtime_val() which returns a value that
indicates what should be encoded for a register with a time field
expressed using Qtime. Use it to factor out common code in
aggr_time_limit_encoded() and hol_block_timer_qtime_val().
Rename aggr_time_limit_encoded() and hol_block_timer_qtime_val() so
their names are both verbs ending in "encode". Rename the "limit"
argument to the former to be "milliseconds" for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In two spots we use u32_replace_bits() to replace a set of bits in a
register while preserving the rest. Both of those cases just zero
the bits being replaced, and this can be done more simply without
using that function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMtnygTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXXOLCACFQGHCZrUGdWBw83UDA9r/lHuiIRuX
ELaSq1h9PJ2BC2+4t/4uDClJgvSYkxJkomNUVDDvbMK8gNTdVdIuHzaR12kerVWs
ArG/g0tjRE3ed5I3JWIOZ/ukfVmsVy/Rm/cwtqtWibJNSFtZuiodN1sYtS3Bv4i3
9sAdU6++LW/4OSAMss0+6VakC27/D5GJEZuEdYveqtf/TunrqNKGL2M5YmbenRoD
Bnx7FIiPHeL8pYz97W5ZEyGzZH90AuKOvHmx3+cHgZVHDzyBKd0UNLgisYFwXo9w
+9tfyZMZqzIZL2R0f3GVGPSvJGnLaX73bdgc8FAas/mY9WJze7plYWKt
=8zkH
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-09-23
The first 2 patches are by Ziyang Xuan and optimize registration and
the sending in the CAN BCM protocol a bit.
The next 8 patches target the gs_usb driver. 7 are by me and first fix
the time hardware stamping support (added during this net-next cycle),
rename a variable, convert the usb_control_msg + manual
kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error
handling and add switchable termination support. The patch by Rhett
Aultman and Vasanth Sadhasivan convert the driver from
usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER.
The last patch is by Shang XiaoJing and removes an unneeded call to
dev_err() from the ctucanfd driver.
* tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ctucanfd: Remove redundant dev_err call
can: gs_usb: remove dma allocations
can: gs_usb: add switchable termination support
can: gs_usb: gs_make_candev(): clean up error handling
can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
can: gs_usb: gs_can_open(): initialize time counter before starting device
can: gs_usb: add missing lock to protect struct timecounter::cycle_last
can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
can: bcm: check the result of can_send() in bcm_can_tx()
can: bcm: registration process optimization in bcm_module_init()
====================
Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart says:
====================
net: macsec: remove the preparation phase when offloading operations
It was reported[1] the 2-step phase offloading of MACsec operations did
not fit well and device drivers were mostly ignoring the first phase
(preparation). In addition the s/w fallback in case h/w rejected an
operation, which could have taken advantage of this design, never was
implemented and it's probably not a good idea anyway (at least
unconditionnally). So let's remove this logic which only makes the code
more complex for no advantage, before there are too many drivers
providing MACsec offloading.
This series removes the first phase (preparation) of the MACsec h/w
offloading. The modifications are split per-driver and in a way that
makes bissection working with logical steps; but I can squash some
patches if needed.
This was tested on the MSCC PHY but not on the Altantic nor mlx5e NICs.
[1] https://lore.kernel.org/all/166322893264.61080.12133865599607623050@kwain/T/
====================
Link: https://lore.kernel.org/r/20220921135118.968595-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the MACsec offloading preparation phase was removed from the
MACsec core implementation as well as from drivers implementing it, we
can safely remove the flag representing it.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware offloading in MACsec was initially supported using 2 phases.
This was proposed in the RFC as this could have allowed easier fallback
to the software implementation if the hardware did not support a feature
or had enough entries already. But this fallback wasn't implemented and
might not be a good idea after all. In addition it turned out this logic
didn't mapped well the hardware logic and device drivers were mostly
ignoring the preparation phase.
Let's remove this as it does not offer any advantage and is ignored by
drivers.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for removing the MACsec h/w offloading preparation phase,
make it a no-op in the Atlantic driver.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for removing the MACsec h/w offloading preparation phase,
make it a no-op in the MSCC phy driver.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It looks like this test has been accidentally dropped when resolving
conflicts in this Makefile.
Most probably because there were 3 different patches modifying this file
in parallel:
commit 152e8ec776 ("selftests/bonding: add a test for bonding lladdr target")
commit bbb774d921 ("net: Add tests for bonding and team address list management")
commit 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
The first one was applied in 'net-next' while the two other ones were
recently applied in the 'net' tree.
But that's alright, easy to fix by re-adding the missing one!
Fixes: 0140a7168f ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devm_ioremap_resource() prints error message in itself. Remove the
dev_err call to avoid redundant error message.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/all/20220923095835.14647-1-shangxiaojing@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
DMA allocated buffers are a precious resource. If there is no need for
DMA allocations, then it might be worth to use non-dma allocated
buffers.
After testing the gs_usb driver with and without DMA allocation, there
does not seem to be a significant change in latency or CPU utilization
either way. Therefore, DMA allocation is not necessary and removed.
Internal buffers used within urbs were managed and freed manually.
These buffers are no longer needed to be managed by the driver. The
URB_FREE_BUFFER flag, allows for the buffers in question to be
automatically freed.
Co-developed-by: Rhett Aultman <rhett.aultman@samsara.com>
Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com>
Signed-off-by: Vasanth Sadhasivan <vasanth.sadhasivan@samsara.com>
Link: https://lore.kernel.org/all/20220920154724.861093-2-rhett.aultman@samsara.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce a label to free the allocated candev in case of an error and
make use of if. Fix a memory leak if the extended bit timing cannot be
read. Extend the error messages to print the number of the failing
channel and the symbolic error name.
Link: https://lore.kernel.org/all/20220921193902.575416-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Convert the driver to use usb_control_msg_{send,recv}() instead of
usb_control_msg(). These functions allow the data to be placed on the
stack. This makes the driver a lot easier as we don't have to deal
with dynamically allocated memory.
Link: https://lore.kernel.org/all/20220921193902.575416-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vladimir Oltean