Sum up sizeof(...) results instead of (incorrectly) hard-coding the
number of bytes, expressed in ints and longs.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Only version 6 of osdmap encoding is supported, anything other than
version 6 results in an error and halts the decoding process. Checking
if version is >= 5 is therefore bogus.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Follow osdmap_decode() and fix this by adding
a special e_inval label to be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The size of the memory area feeded to crush_decode() should be limited
not only by osdmap end, but also by the crush map length. Also, drop
unnecessary dout() (dout() in crush_decode() conveys the same info) and
step past crush map only if it is decoded successfully.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Check length of osd_state, osd_weight and osd_addr arrays. They
should all have exactly max_osd elements after the call to
osdmap_set_max_osd().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
max_osd value is not covered by any ceph_decode_need(). Use a safe
version of ceph_decode_* macro to decode it.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The existing error handling scheme requires resetting err to -EINVAL
prior to calling any ceph_decode_* macro. This is ugly and fragile,
and there already are a few places where we would return 0 on error,
due to a missing reset. Fix this by adding a special e_inval label to
be used by all ceph_decode_* macros.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Split osdmap allocation and initialization into a separate function,
ceph_osdmap_decode().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Dump osdmap in hex on both full and incremental decode errors, to make
it easier to match the contents with error offset. dout() map epoch
and max_osd value on success.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Alex Elder <elder@linaro.org>
With the addition of erasure coding support in the future, scratch
variable-length array in crush_do_rule_ary() is going to grow to at
least 200 bytes on average, on top of another 128 bytes consumed by
rawosd/osd arrays in the call chain. Replace it with a buffer inside
struct osdmap and a mutex. This shouldn't result in any contention,
because all osd requests were already serialized by request_mutex at
that point; the only unlocked caller was ceph_ioctl_get_dataloc().
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Overwrite ceph_osd_request::r_oloc.pool with read_tier for read ops and
write_tier for write and read+write ops (aka basic tiering support).
{read,write}_tier are part of pg_pool_t since v9. This commit bumps
our pg_pool_t decode compat version from v7 to v9, all new fields
except for {read,write}_tier are ignored.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
"Lookup pool info by ID" function is hidden in osdmap.c. Expose it to
the rest of libceph.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Switch ceph_calc_ceph_pg() to new oloc and oid abstractions and rename
it to ceph_oloc_oid_to_pg() to make its purpose more clear.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
This is only present to size the temporary scratch arrays that we put on
the stack. Let the caller allocate them as they wish and remove the
limitation.
Reflects ceph.git commit 1cfe140bf2dab99517589a82a916f4c75b9492d1.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Pass the size of the weight vector into crush_do_rule() to ensure that we
don't access values past the end. This can happen if the caller misbehaves
and passes a weight vector that is smaller than max_devices.
Currently the monitor tries to prevent that from happening, but this will
gracefully tolerate previous bad osdmaps that got into this state. It's
also a bit more defensive.
Reflects ceph.git commit 5922e2c2b8335b5e46c9504349c3a55b7434c01a.
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Fix a typo that used the wrong bitmask for the pg.seed calculation. This
is normally unnoticed because in most cases pg_num == pgp_num. It is, however,
a bug that is easily corrected.
CC: stable@vger.kernel.org
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <alex.elder@linary.org>
There are two basically identical definitions of __decode_pgid()
in libceph, one in "net/ceph/osdmap.c" and the other in
"net/ceph/osd_client.c". Get rid of both, and instead define
a single inline version in "include/linux/ceph/osdmap.h".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The purpose of ceph_calc_object_layout() is to fill in the pool
number and seed for a ceph_pg structure provided, based on a given
osd map and target object id.
Currently that function takes a file layout parameter, but the only
thing used out of that is its pool number.
Change the function so it takes a pool number rather than the full
file layout structure. Only update the ceph_pg if the pool is found
in the osd map. Get rid of few useless lines of code from the
function while there.
Since the function now very clearly just fills in the ceph_pg
structure it's provided, rename it ceph_calc_ceph_pg().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In 4f6a7e5ee1 we effectively dropped support
for the legacy encoding for the OSDMap and incremental. However, we didn't
fix the decoding for the pgid.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The legacy behavior adds the pgid seed and pool together as the input for
CRUSH. That is problematic because each pool's PGs end up mapping to the
same OSDs: 1.5 == 2.4 == 3.3 == ...
Instead, if the HASHPSPOOL flag is set, we has the ps and pool together and
feed that into CRUSH. This ensures that two adjacent pools will map to
an independent pseudorandom set of OSDs.
Advertise our support for this via a protocol feature flag.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Instead of using the old ceph_object_layout struct, update our internal
ceph_calc_object_layout method to use the ceph_pg type. This allows us to
pass the full 32-bit precision of the pgid.seed to the callers. It also
allows some callers to avoid reaching into the request structures for the
struct ceph_object_layout fields.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Support (and require) the PGID64, PGPOOL3, and OSDENC protocol features.
These have been present in ceph.git since v0.42, Feb 2012. Require these
features to simplify support; nobody is running older userspace.
Note that the new request and reply encoding is still not in place, so the new
code is not yet functional.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Always decode data into our cpu-native ceph_pg type that has the correct
field widths. Limit any remaining uses of ceph_pg_v1 to dealing with the
legacy protocol.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Rename the old version this type to distinguish it from the new version.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
The variable "str" is used as both the source and destination in
function snprintf(), which is undefined behavior based on C11. The
original description in C11 is:
"If copying takes place between objects that
overlap, the behavior is undefined."
And, the function of ceph_osdmap_state_str() is to return the osdmap
state, so it should return "doesn't exist" when all the conditions
are not satisfied. I fix it in this patch.
[elder@inktank.com: shortened the commit message]
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
ceph_calc_file_object_mapping() takes (among other things) a "file"
offset and length, and based on the layout, determines the object
number ("bno") backing the affected portion of the file's data and
the offset into that object where the desired range begins. It also
computes the size that should be used for the request--either the
amount requested or something less if that would exceed the end of
the object.
This patch changes the input length parameter in this function so it
is used only for input. That is, the argument will be passed by
value rather than by address, so the value provided won't get
updated by the function.
The value would only get updated if the length would surpass the
current object, and in that case the value it got updated to would
be exactly that returned in *oxlen.
Only one of the two callers is affected by this change. Update
ceph_calc_raw_layout() so it records any updated value.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add libceph support for a new CRUSH tunable recently added to Ceph servers.
Consider the CRUSH rule
step chooseleaf firstn 0 type <node_type>
This rule means that <n> replicas will be chosen in a manner such that
each chosen leaf's branch will contain a unique instance of <node_type>.
When an object is re-replicated after a leaf failure, if the CRUSH map uses
a chooseleaf rule the remapped replica ends up under the <node_type> bucket
that held the failed leaf. This causes uneven data distribution across the
storage cluster, to the point that when all the leaves but one fail under a
particular <node_type> bucket, that remaining leaf holds all the data from
its failed peers.
This behavior also limits the number of peers that can participate in the
re-replication of the data held by the failed leaf, which increases the
time required to re-replicate after a failure.
For a chooseleaf CRUSH rule, the tree descent has two steps: call them the
inner and outer descents.
If the tree descent down to <node_type> is the outer descent, and the descent
from <node_type> down to a leaf is the inner descent, the issue is that a
down leaf is detected on the inner descent, so only the inner descent is
retried.
In order to disperse re-replicated data as widely as possible across a
storage cluster after a failure, we want to retry the outer descent. So,
fix up crush_choose() to allow the inner descent to return immediately on
choosing a failed leaf. Wire this up as a new CRUSH tunable.
Note that after this change, for a chooseleaf rule, if the primary OSD
in a placement group has failed, choosing a replacement may result in
one of the other OSDs in the PG colliding with the new primary. This
requires that OSD's data for that PG to need moving as well. This
seems unavoidable but should be relatively rare.
This corresponds to ceph.git commit 88f218181a9e6d2292e2697fc93797d0f6d6e5dc.
Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Sage Weil <sage@inktank.com>
Define and export function ceph_pg_pool_name_by_id() to supply
the name of a pg pool whose id is given. This will be used by
the next patch.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Ensure that we set the err value correctly so that we do not pass a 0
value to ERR_PTR and confuse the calling code. (In particular,
osd_client.c handle_map() will BUG(!newmap)).
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
If we encounter an invalid (e.g., zeroed) mapping, return an error
and avoid a divide by zero.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
The server side recently added support for tuning some magic
crush variables. Decode these variables if they are present, or use the
default values if they are not present.
Corresponds to ceph.git commit 89af369c25f274fe62ef730e5e8aad0c54f1e5a5.
Signed-off-by: caleb miles <caleb.miles@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
On 32-bit systems, a large `pglen' would overflow `pglen*sizeof(u32)'
and bypass the check ceph_decode_need(p, end, pglen*sizeof(u32), bad).
It would also overflow the subsequent kmalloc() size, leading to
out-of-bounds write.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
On 32-bit systems, a large `n' would overflow `n * sizeof(u32)' and bypass
the check ceph_decode_need(p, end, n * sizeof(u32), bad). It would also
overflow the subsequent kmalloc() size, leading to out-of-bounds write.
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
`len' is read from network and thus needs validation. Otherwise a
large `len' would cause out-of-bounds access via the memcpy() call.
In addition, len = 0xffffffff would overflow the kmalloc() size,
leading to out-of-bounds write.
This patch adds a check of `len' via ceph_decode_need(). Also use
kstrndup rather than kmalloc/memcpy.
[elder@inktank.com: added -ENOMEM return for null kstrndup() result]
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Pull ceph updates from Sage Weil:
"There are some updates and cleanups to the CRUSH placement code, a bug
fix with incremental maps, several cleanups and fixes from Josh Durgin
in the RBD block device code, a series of cleanups and bug fixes from
Alex Elder in the messenger code, and some miscellaneous bounds
checking and gfp cleanups/fixes."
Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the
networking people preferring "unsigned int" over just "unsigned".
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits)
libceph: fix pg_temp updates
libceph: avoid unregistering osd request when not registered
ceph: add auth buf in prepare_write_connect()
ceph: rename prepare_connect_authorizer()
ceph: return pointer from prepare_connect_authorizer()
ceph: use info returned by get_authorizer
ceph: have get_authorizer methods return pointers
ceph: ensure auth ops are defined before use
ceph: messenger: reduce args to create_authorizer
ceph: define ceph_auth_handshake type
ceph: messenger: check return from get_authorizer
ceph: messenger: rework prepare_connect_authorizer()
ceph: messenger: check prepare_write_connect() result
ceph: don't set WRITE_PENDING too early
ceph: drop msgr argument from prepare_write_connect()
ceph: messenger: send banner in process_connect()
ceph: messenger: reset connection kvec caller
libceph: don't reset kvec in prepare_write_banner()
ceph: ignore preferred_osd field
ceph: fully initialize new layout
...
Usually, we are adding pg_temp entries or removing them. Occasionally they
update. In that case, osdmap_apply_incremental() was failing because the
rbtree entry already exists.
Fix by removing the existing entry before inserting a new one.
Fixes http://tracker.newdream.net/issues/2446
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
If we get an error code from crush_do_rule(), print an error to the
console.
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
These were used for the ill-fated forcefeed feature. Remove them.
Reflects ceph.git commit ebdf80edfecfbd5a842b71fbe5732857994380c1.
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Remove forcefeed functionality from CRUSH. This is an ugly misfeature that
is mostly useless and unused. Remove it.
Reflects ceph.git commit ed974b5000f2851207d860a651809af4a1867942.
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Conflicts:
net/ceph/crush/mapper.c
This was an ill-conceived feature that has been removed from Ceph. Do
this gracefully:
- reject attempts to specify a preferred_osd via the ioctl
- stop exposing this information via virtual xattrs
- always fill in -1 for requests, in case we talk to an older server
- don't calculate preferred_osd placements/pgids
Reviewed-by: Alex Elder <elder@inktank.com>
Signed-off-by: Sage Weil <sage@inktank.com>
Use of "unsigned int" is preferred to bare "unsigned" in net tree.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing overflow check (n > ULONG_MAX / b) didn't work, because
n = ULONG_MAX / b would both bypass the check and still overflow the
allocation size a + n * b.
The correct check should be (n > (ULONG_MAX - a) / b).
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The incremental map updates have a record for each pg_temp mapping that is
to be add/updated (len > 0) or removed (len == 0). The old code was
written as if the updates were a complete enumeration; that was just wrong.
Update the code to remove 0-length entries and drop the rbtree traversal.
This avoids misdirected (and hung) requests that manifest as server
errors like
[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11
Signed-off-by: Sage Weil <sage@newdream.net>
We need to apply the modulo pg_num calculation before looking up a pgid in
the pg_temp mapping rbtree. This fixes pg_temp mappings, and fixes
(some) misdirected requests that result in messages like
[WRN] client4104 10.0.1.219:0/275025290 misdirected client4104.1:129 0.1 to osd0 not [1,0] in e11/11
on the server and stall make the client block without getting a reply (at
least until the pg_temp mapping goes way, but that can take a long long
time).
Reorder calc_pg_raw() a bit to make more sense.
Signed-off-by: Sage Weil <sage@newdream.net>
Old incrementals encode a 0 value (nearly always) when an osd goes down.
Change that to allow any state bit(s) to be flipped. Special case 0 to
mean flip the CEPH_OSD_UP bit to mimic the old behavior.
Signed-off-by: Sage Weil <sage@newdream.net>
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph. This
is mostly a matter of moving files around. However, a few key pieces
of the interface change as well:
- ceph_client becomes ceph_fs_client and ceph_client, where the latter
captures the mon and osd clients, and the fs_client gets the mds client
and file system specific pieces.
- Mount option parsing and debugfs setup is correspondingly broken into
two pieces.
- The mon client gets a generic handler callback for otherwise unknown
messages (mds map, in this case).
- The basic supported/required feature bits can be expanded (and are by
ceph_fs_client).
No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.
Signed-off-by: Sage Weil <sage@newdream.net>
Ilya Dryomov