The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture we
supported that has no MMU implementation, but there are still a few
architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
and without an MMU.
- A series to add a generic ticket spinlock that can be shared by most
architectures with a working cmpxchg or ll/sc type atomic, including
the conversion of riscv, csky and openrisc. This series is also a
prerequisite for the loongarch64 architecture port that will come as
a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers.
-----BEGIN PGP SIGNATURE-----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=ri2Q
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"The asm-generic tree contains three separate changes for linux-5.19:
- The h8300 architecture is retired after it has been effectively
unmaintained for a number of years. This is the last architecture
we supported that has no MMU implementation, but there are still a
few architectures (arm, m68k, riscv, sh and xtensa) that support
CPUs with and without an MMU.
- A series to add a generic ticket spinlock that can be shared by
most architectures with a working cmpxchg or ll/sc type atomic,
including the conversion of riscv, csky and openrisc. This series
is also a prerequisite for the loongarch64 architecture port that
will come as a separate pull request.
- A cleanup of some exported uapi header files to ensure they can be
included from user space without relying on other kernel headers"
* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
h8300: remove stale bindings and symlink
sparc: add asm/stat.h to UAPI compile-test coverage
powerpc: add asm/stat.h to UAPI compile-test coverage
mips: add asm/stat.h to UAPI compile-test coverage
riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
agpgart.h: do not include <stdlib.h> from exported header
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
remove the h8300 architecture
kernel test robot reports a build error used with clang compiler and
mips-randconfig [1]:
ld.lld: error: undefined symbol: pci_remap_iospace
we can see the following configs in the mips-randconfig file:
CONFIG_RALINK=y
CONFIG_SOC_MT7620=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PCI=y
CONFIG_RALINK is set, so pci_remap_iospace is defined in the related
arch/mips/include/asm/mach-ralink/spaces.h header file:
#define pci_remap_iospace pci_remap_iospace
CONFIG_PCI is set, so pci_remap_iospace() in drivers/pci/pci.c is not
built due to pci_remap_iospace is defined under CONFIG_RALINK.
#ifndef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, ...)
$ objdump -d drivers/pci/pci.o | grep pci_remap_iospace
00004cc8 <devm_pci_remap_iospace>:
4d18: 10400008 beqz v0,4d3c <devm_pci_remap_iospace+0x74>
4d2c: 1040000c beqz v0,4d60 <devm_pci_remap_iospace+0x98>
4d70: 1000fff3 b 4d40 <devm_pci_remap_iospace+0x78>
In addition, CONFIG_PCI_DRIVERS_GENERIC is not set, so pci_remap_iospace()
in arch/mips/pci/pci-generic.c is not built too.
#ifdef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, ...)
For the above reasons, undefined reference pci_remap_iospace() looks like
reasonable.
Here are simple steps to reproduce used with gcc and defconfig:
cd mips.git
make vocore2_defconfig # set RALINK, SOC_MT7620, PCI_DRIVERS_LEGACY
make menuconfig # set PCI
make
there exists the following build error:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
drivers/pci/pci.o: In function `devm_pci_remap_iospace':
pci.c:(.text+0x4d24): undefined reference to `pci_remap_iospace'
Makefile:1158: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC can fix the build
error, with this patch, no build error remains. This patch is similar with
commit e538e86498 ("MIPS: asm: pci: define arch-specific
'pci_remap_iospace()' dependent on 'CONFIG_PCI_DRIVERS_GENERIC'").
[1] https://lore.kernel.org/lkml/202205251247.nQ5cxSV6-lkp@intel.com/
Fixes: 09d97da660 ("MIPS: Only define pci_remap_iospace() for Ralink")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding
to very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space
to remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections
that have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting.
This makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core
from Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Wjii
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Support TCPv6 segmentation offload with super-segments larger than
64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).
- Generalize skb freeing deferral to per-cpu lists, instead of
per-socket lists.
- Add a netdev statistic for packets dropped due to L2 address
mismatch (rx_otherhost_dropped).
- Continue work annotating skb drop reasons.
- Accept alternative netdev names (ALT_IFNAME) in more netlink
requests.
- Add VLAN support for AF_PACKET SOCK_RAW GSO.
- Allow receiving skb mark from the socket as a cmsg.
- Enable memcg accounting for veth queues, sysctl tables and IPv6.
BPF
---
- Add libbpf support for User Statically-Defined Tracing (USDTs).
- Speed up symbol resolution for kprobes multi-link attachments.
- Support storing typed pointers to referenced and unreferenced
objects in BPF maps.
- Add support for BPF link iterator.
- Introduce access to remote CPU map elements in BPF per-cpu map.
- Allow middle-of-the-road settings for the
kernel.unprivileged_bpf_disabled sysctl.
- Implement basic types of dynamic pointers e.g. to allow for
dynamically sized ringbuf reservations without extra memory copies.
Protocols
---------
- Retire port only listening_hash table, add a second bind table
hashed by port and address. Avoid linear list walk when binding to
very popular ports (e.g. 443).
- Add bridge FDB bulk flush filtering support allowing user space to
remove all FDB entries matching a condition.
- Introduce accept_unsolicited_na sysctl for IPv6 to implement
router-side changes for RFC9131.
- Support for MPTCP path manager in user space.
- Add MPTCP support for fallback to regular TCP for connections that
have never connected additional subflows or transmitted
out-of-sequence data (partial support for RFC8684 fallback).
- Avoid races in MPTCP-level window tracking, stabilize and improve
throughput.
- Support lockless operation of GRE tunnels with seq numbers enabled.
- WiFi support for host based BSS color collision detection.
- Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.
- Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).
- Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).
- Allow matching on the number of VLAN tags via tc-flower.
- Add tracepoint for tcp_set_ca_state().
Driver API
----------
- Improve error reporting from classifier and action offload.
- Add support for listing line cards in switches (devlink).
- Add helpers for reporting page pool statistics with ethtool -S.
- Add support for reading clock cycles when using PTP virtual clocks,
instead of having the driver convert to time before reporting. This
makes it possible to report time from different vclocks.
- Support configuring low-latency Tx descriptor push via ethtool.
- Separate Clause 22 and Clause 45 MDIO accesses more explicitly.
New hardware / drivers
----------------------
- Ethernet:
- Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
- Sunplus SP7021 SoC (sp7021_emac)
- Add support for Renesas RZ/V2M (in ravb)
- Add support for MediaTek mt7986 switches (in mtk_eth_soc)
- Ethernet PHYs:
- ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
- TI DP83TD510 PHY
- Microchip LAN8742/LAN88xx PHYs
- WiFi:
- Driver for pureLiFi X, XL, XC devices (plfxlc)
- Driver for Silicon Labs devices (wfx)
- Support for WCN6750 (in ath11k)
- Support Realtek 8852ce devices (in rtw89)
- Mobile:
- MediaTek T700 modems (Intel 5G 5000 M.2 cards)
- CAN:
- ctucanfd: add support for CTU CAN FD open-source IP core from
Czech Technical University in Prague
Drivers
-------
- Delete a number of old drivers still using virt_to_bus().
- Ethernet NICs:
- intel: support TSO on tunnels MPLS
- broadcom: support multi-buffer XDP
- nfp: support VF rate limiting
- sfc: use hardware tx timestamps for more than PTP
- mlx5: multi-port eswitch support
- hyper-v: add support for XDP_REDIRECT
- atlantic: XDP support (including multi-buffer)
- macb: improve real-time perf by deferring Tx processing to NAPI
- High-speed Ethernet switches:
- mlxsw: implement basic line card information querying
- prestera: add support for traffic policing on ingress and egress
- Embedded Ethernet switches:
- lan966x: add support for packet DMA (FDMA)
- lan966x: add support for PTP programmable pins
- ti: cpsw_new: enable bc/mc storm prevention
- Qualcomm 802.11ax WiFi (ath11k):
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- enable keep-alive during WoWLAN suspend
- implement remain-on-channel support
- MediaTek WiFi (mt76):
- support Wireless Ethernet Dispatch offloading packet movement
between the Ethernet switch and WiFi interfaces
- non-standard VHT MCS10-11 support
- mt7921 AP mode support
- mt7921 IPv6 NS offload support
- Ethernet PHYs:
- micrel: ksz9031/ksz9131: cabletest support
- lan87xx: SQI support for T1 PHYs
- lan937x: add interrupt support for link detection"
* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
ptp: ocp: Add firmware header checks
ptp: ocp: fix PPS source selector debugfs reporting
ptp: ocp: add .init function for sma_op vector
ptp: ocp: vectorize the sma accessor functions
ptp: ocp: constify selectors
ptp: ocp: parameterize input/output sma selectors
ptp: ocp: revise firmware display
ptp: ocp: add Celestica timecard PCI ids
ptp: ocp: Remove #ifdefs around PCI IDs
ptp: ocp: 32-bit fixups for pci start address
Revert "net/smc: fix listen processing for SMC-Rv2"
ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
selftests/bpf: Dynptr tests
bpf: Add dynptr data slices
bpf: Add bpf_dynptr_read and bpf_dynptr_write
bpf: Dynptr support for ring buffers
bpf: Add bpf_dynptr_from_mem for local dynptrs
bpf: Add verifier support for dynptrs
bpf: Suppress 'passing zero to PTR_ERR' warning
bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
...
Use memblock_add_node to add new memblock region within a NUMA node
in early_parse_mem() under CONFIG_NUMA, otherwise the mem parameter
can not work well.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, the users usually need to make sure the value
of mem parameter is correct, but it is better to do some check to
avoid potential boot hangs.
This commit checks whether mem parameter is empty, if yes, return
-EINVAL before call memblock_remove() and memblock_add().
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The convention for indentation seems to be a single tab. Help text is
further indented by an additional two whitespaces. Fix the lines that
violate these rules.
While add it, add a missing trailing endif comment.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The function arch_sync_dma_for_cpu_all() was used but was
missing a prototype declaration.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Looks like almost all changes to this driver had been tree-wide
refactoring since git era begun. There is one commit from Al
15 years ago which could potentially be fixing a real bug.
The driver is using virt_to_bus() and is a real magnet for pointless
cleanups. It seems unlikely to have real users. Let's try to shed
this maintenance burden.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent commit 198688edbf ("MIPS: Fix inline asm input/output type
mismatch in checksum.h used with Clang") introduced a code size and
performance regression with 64-bit code emitted for `csum_tcpudp_nofold'
by GCC, caused by a redundant truncation operation produced due to a
data type change made to the variable associated with the inline
assembly's output operand.
The intent previously expressed here with operands and constraints for
optimal code was to have the output operand share a register with one
inputs, both of a different integer type each. This is perfectly valid
with the MIPS psABI where a register can hold integer data of different
types and the assembly code used here makes data stored in the output
register match the data type used with the output operand, however it
has turned out impossible to express this arrangement in source code
such as to satisfy LLVM, apparently due to the compiler's internal
limitations.
There is nothing peculiar about the inline assembly `csum_tcpudp_nofold'
includes however, though it does choose assembly instructions carefully.
Rewrite this piece of assembly in plain C then, using corresponding C
language operations, making GCC produce the same assembly instructions,
possibly shuffled, in the general case and sometimes actually fewer of
them where an input is constant, because the compiler does not have to
reload it to a register (operand constraints could be adjusted for that,
but the plain C approach is cleaner anyway).
Example code size changes are as follows, for a 32-bit configuration:
text data bss total filename
5920480 1347236 126592 7394308 vmlinux-old
5920480 1347236 126592 7394308 vmlinux-now
5919728 1347236 126592 7393556 vmlinux-c
and for a 64-bit configuration:
text data bss total filename
6024112 1790828 225728 8040668 vmlinux-old
6024128 1790828 225728 8040684 vmlinux-now
6023760 1790828 225728 8040316 vmlinux-c
respectively, where "old" is with the commit referred reverted, "now" is
with no change, and "c" is with this change applied.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The strlcpy should not be used because it doesn't limit the source
length. Preferred is strscpy.
Signed-off-by: XueBing Chen <chenxuebing@jari.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The CN6640-SNIC10E-G and CN6640-SNIC10E-1.1-G PCIe NICs are based on
this board.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Refresh the defconfig files of CU1000-Neo board and CU1830-Neo board,
remove the selection of SPI-GPIO, and add the selection of SSI.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
1.Add SSI nodes for X1000 SoC and X1830 SoC from Ingenic.
2.Refresh SSI related nodes in CU1000-Neo and CU1830-Neo.
3.The X1830 SoC used by the CU1830-Neo and the X1000 SoC
used by the CU1000-Neo are both single-core processors,
therefore the "OST_CLK_PERCPU_TIMER" ABI should not be
used in the OST nodes of the CU1830-Neo and CU1000-Neo,
it is just a coincidence that there is no problem now.
So replace the misused "OST_CLK_PERCPU_TIMER" ABI with
the correct "OST_CLK_EVENT_TIMER" ABI.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove extra space between 'prompt' keyword and string.
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
the comments in mips).
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some defines are the same across all archs. Move the most obvious
intersection to termbits-common.h.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It isn't necessary to manually walk the device tree and enable
the CPU clock anymore. The CPU and other necessary clocks are
now flagged as critical in the clock driver, which accomplishes
the same thing in a more declarative fashion.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220428164454.17908-4-aidanmacdonald.0x0@gmail.com
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> # On X1000 and X1830
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Patch series "Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating", v4.
presently, migrating a hugetlb page or unmapping a poisoned hugetlb page,
we'll use ptep_clear_flush() and set_pte_at() to nuke the page table entry
and remap it, and this is incorrect for CONT-PTE or CONT-PMD size hugetlb
page, which will cause potential data consistent issue. This patch set
will change to use hugetlb related APIs to fix this issue.
Note: Mike pointed out the huge_ptep_get() will only return the one
specific value, and it would not take into account the dirty or young bits
of CONT-PTE/PMDs like the huge_ptep_get_and_clear() [1]. This
inconsistent issue is not introduced by this patch set, and this issue
will be addressed in another thread [2]. Meanwhile the uffd for hugetlb
case [3] pointed out by Gerald also needs another patch to address.
[1] https://lore.kernel.org/linux-mm/85bd80b4-b4fd-0d3f-a2e5-149559f2f387@oracle.com/
[2] https://lore.kernel.org/all/cover.1651998586.git.baolin.wang@linux.alibaba.com/
[3] https://lore.kernel.org/linux-mm/20220503120343.6264e126@thinkpad/
This patch (of 3):
It is incorrect to use ptep_clear_flush() to nuke a hugetlb page table
when unmapping or migrating a hugetlb page, and will change to use
huge_ptep_clear_flush() instead in the following patches.
So this is a preparation patch, which changes the huge_ptep_clear_flush()
to return the original pte to help to nuke a hugetlb page table.
[baolin.wang@linux.alibaba.com: fix build in several more architectures]
Link: https://lkml.kernel.org/r/0009a4cd-2826-e8be-e671-f050d4f18d5d@linux.alibaba.com
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20220511181531.7f27a5c1@canb.auug.org.au
Link: https://lkml.kernel.org/r/cover.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20f77ddab90baa249bd24504c413189b82acde69.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/cover.1652147571.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/dcf065868cce35bceaf138613ad27f17bb7c0c19.1652147571.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For situations in which we don't have a c0 counter register available,
we've been falling back to reading the c0 "random" register, which is
usually bounded by the amount of TLB entries and changes every other
cycle or so. This means it wraps extremely often. We can do better by
combining this fast-changing counter with a potentially slower-changing
counter from random_get_entropy_fallback() in the more significant bits.
This commit combines the two, taking into account that the changing bits
are in a different bit position depending on the CPU model. In addition,
we previously were falling back to 0 for ancient CPUs that Linux does
not support anyway; remove that dead path entirely.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
asm/stat.h is currently excluded from the UAPI compile-test for
ARCH=mips because of the errors like follows:
HDRTEST usr/include/asm/stat.h
In file included from <command-line>:32:
./usr/include/asm/stat.h:22:2: error: unknown type name 'ino_t'
22 | ino_t st_ino;
| ^~~~~
./usr/include/asm/stat.h:23:2: error: unknown type name 'mode_t'
23 | mode_t st_mode;
| ^~~~~~
./usr/include/asm/stat.h:25:2: error: unknown type name 'uid_t'
25 | uid_t st_uid;
| ^~~~~
./usr/include/asm/stat.h:26:2: error: unknown type name 'gid_t'
26 | gid_t st_gid;
| ^~~~~
./usr/include/asm/stat.h:58:2: error: unknown type name 'mode_t'
58 | mode_t st_mode;
| ^~~~~~
./usr/include/asm/stat.h:61:2: error: unknown type name 'uid_t'
61 | uid_t st_uid;
| ^~~~~
./usr/include/asm/stat.h:62:2: error: unknown type name 'gid_t'
62 | gid_t st_gid;
| ^~~~~
The errors can be fixed by prefixing the types with __kernel_.
Then, remove the no-header-test entry from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix the following coccicheck warning:
arch/mips/sibyte/bcm1480/setup.c:37:5-8: Unneeded variable: "ret".
Return "0" on line 67.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If define CONFIG_KPROBES, __kprobes annotation forces the whole function
into the ".kprobes.text" section, NOKPROBE_SYMBOL() only stores the given
function address in the "_kprobe_blacklist" section which is introduced
to maintain kprobes blacklist.
Modify the related code to use NOKPROBE_SYMBOL() to protect functions from
kprobes instead of __kprobes annotation under arch/mips.
No obvious functional change in this patch, some more work needs to be done
to fix the kernel panic when execute the following testcase on mips:
# cd tools/testing/selftests/ftrace
# ./ftracetest test.d/kprobe/multiple_kprobes.tc
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Static variables do not need to be initialised to 0, because compiler
will initialise all uninitialised statics to 0. Thus, remove the
unneeded initializations.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
slot_errbuf_lock has declared and initialized by DEFINE_SPINLOCK,
so we don't need to spin_lock_init again, drop it.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When process exits or execute new binary, it will call function
exit_mmap with old mm, there is such function call trace:
exit_mmap(struct mm_struct *mm)
--> tlb_finish_mmu(&tlb, 0, -1)
--> arch_tlb_finish_mmu(tlb, start, end, force)
--> tlb_flush_mmu(tlb);
--> tlb_flush(struct mmu_gather *tlb)
--> flush_tlb_mm(tlb->mm)
It is not necessary to flush tlb since oldmm is not used anymore
by the process, there is similar operations on IA64/ARM64 etc,
this patch adds such optimization on MIPS.
Signed-off-by: Mao Bibo <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Now that we are using oneshot threaded IRQ this method is not used anymore.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[arnd: add the db1300 change as well]
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.
Convert octal values to hex.
First step is an automated conversion with:
for i in $(git ls-files | grep 'termbits\.h'); do
awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
l=int(((length($3) - 1) * 3 + 3) / 4);
repl = sprintf("0x%0" l "x", $3);
print gensub(/[^[:blank:]]+/, repl, 3);
next} {print}' $i > $i~;
mv $i~ $i;
done
On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/2c8c96f-a12f-aadc-18ac-34c1d371929c@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a chance 'cpu_has_fpu' would still be overridden when the
CONFIG_MIPS_FP_SUPPORT configuration option has been disabled. So
add a safety check for 'cpu_has_fpu'.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Many other place in the kernel prefer the latter, so let's keep
it consistent in MIPS code as well. Also, removes a useless header.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:
ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'
where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 7505576d1c ("MIPS: add support for SGI Octane (IP30)")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu'
kernel parameter non-functional, and also causes a link error:
ld: arch/mips/kernel/traps.o: in function `trap_init':
./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe'
ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'
where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reported-by: Stephen Zhang <starzhangzsd@gmail.com>
Fixes: 0ebb2f4159 ("MIPS: IP27: Update/restructure CPU overrides")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix the discrepancy between the two places we check for the CP0 counter
erratum in along with the incorrect comparison of the R4400 revision
number against 0x30 which matches none and consistently consider all
R4000 and R4400 processors affected, as documented in processor errata
publications[1][2][3], following the mapping between CP0 PRId register
values and processor models:
PRId | Processor Model
---------+--------------------
00000422 | R4000 Revision 2.2
00000430 | R4000 Revision 3.0
00000440 | R4400 Revision 1.0
00000450 | R4400 Revision 2.0
00000460 | R4400 Revision 3.0
No other revision of either processor has ever been spotted.
Contrary to what has been stated in commit ce202cbb9e ("[MIPS] Assume
R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the
CP0 counter as buggy does not preclude it from being used as either a
clock event or a clock source device. It just cannot be used as both at
a time, because in that case clock event interrupts will be occasionally
lost, and the use as a clock event device takes precedence.
Compare against 0x4ff in `can_use_mips_counter' so that a single machine
instruction is produced.
References:
[1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS
Technologies Inc., May 10, 1994, Erratum 53, p.13
[2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies
Inc., February 9, 1994, Erratum 21, p.4
[3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS
Technologies Inc., January 24, 1995, Erratum 14, p.3
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: ce202cbb9e ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug")
Cc: stable@vger.kernel.org # v2.6.24+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver received nothing but automated fixes in the last 15 years.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver received nothing but automated fixes since git era begun.
Since it's using virt_to_bus it's unlikely to be used on any modern
platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver received nothing but automated fixes (mostly spelling
and compiler warnings) since git era begun. Since it's using
virt_to_bus it's unlikely to be used on any modern platform.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Copied from the jz4740 devicetree and trimmed to 5 timers, which
is what the hardware supports.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pinctrl device tree binding will be converted to YAML format. Rename
the pin nodes so they end with "-pins" to match the schema.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All pin groups function as gpio unless set otherwise. Therefore, remove
this unnecessary binding.
Tested on UniElec U7621-06-16M on OpenWrt.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Mux the MT7530 switch's phy4 to the SoC's gmac1 on the GB-PC1 devicetree.
This achieves 2 Gbps total bandwidth to the CPU using the second RGMII.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add mdio label to the mdio-bus node to easily refer to it.
Use the newly created label on the GB-PC2 devicetree.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Provide a single common definition for the compat_flock and
compat_flock64 structures using the same tricks as for the native
variants. Another extra define is added for the packing required on
x86.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Link: https://lore.kernel.org/r/20220405071314.3225832-4-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The F_GETLK64/F_SETLK64/F_SETLKW64 fcntl opcodes are only implemented
for the 32-bit syscall APIs, but are also needed for compat handling
on 64-bit kernels.
Consolidate them in unistd.h instead of definining the internal compat
definitions in compat.h, which is rather error prone (e.g. parisc
gets the values wrong currently).
Note that before this change they were never visible to userspace due
to the fact that CONFIG_64BIT is only set for kernel builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Don't bother to define the symbols empty, just don't use them.
That makes the intent a little more clear.
Remove the unused HAVE_ARCH_STRUCT_FLOCK64 define and merge the
32-bit mips struct flock into the generic one.
Add a new __ARCH_FLOCK_EXTRA_SYSID macro following the style of
__ARCH_FLOCK_PAD to avoid having a separate definition just for
one architecture.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CN66XX_PASS1_0 has 7 interfaces, other revisions have 8 interfaces.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some CN66XX series Octeon II chips seem to hang if a reset is issued on
XAUI initialization. Avoid the hang by disabling the reset.
Tested on SNIC10E.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the missing of_node_put() to release the refcount incremented
by of_find_compatible_node().
Signed-off-by: Gong Yuanjun <ruc_gongyuanjun@163.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
platform_device_add_data() duplicates the memory it is passed. So we can
free some memory to save a few bytes that would remain unused otherwise.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the new compatible string "ralink,mt7621-pinctrl" for the Ralink MT7621
pinctrl subdriver on mt7621.dtsi.
Each subdriver needs to have a different compatible string. We don't want
the same compatible string to match a different subdriver's pinmux data as
it's not for our SoC.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220414173916.5552-10-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Use the generic swiotlb initialization helper instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The driver for ATM Ambassador devices spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.
In fact it sounds like the FW loading was broken from 2008
'til 2012 - see commit fcdc90b025 ("atm: forever loop loading
ambassador firmware").
Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.
Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver for LAN Media WAN interfaces spews build warnings on
microblaze. The virt_to_bus() calls discard the volatile keyword.
The right thing to do would be to migrate this driver to a modern
DMA API but it seems unlikely anyone is actually using it.
There had been no fixes or functional changes here since
the git era begun.
Let's remove this driver, there isn't much changing in the APIs,
if users come forward we can apologize and revert.
Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 67512a8cf5 ("MIPS: Avoid macro redefinitions") changed how the
MIPS register macros were defined, in order to allow the code to compile
under LLVM/Clang.
The MIPS CRC32 code however wasn't updated accordingly, causing a build
bug when using a MIPS32r6 toolchain without CRC support.
Update the CRC32 code to use the macros correctly, to fix the build
failures.
Fixes: 67512a8cf5 ("MIPS: Avoid macro redefinitions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
My kernel robot reports build error from drivers/iio/adc/da9150-gpadc.c,
drivers/iio/adc/da9150-gpadc.c:254:13: error: ‘DA9150_GPADC_CHAN_0x08’
undeclared here (not in a function); did you mean ‘DA9150_GPADC_CHAN_TBAT’?
254 | .channel = DA9150_GPADC_CHAN_##_id,
We define GPIOD in rb.h, in fact it should only be used in gpio.c, but
it affects the driver da9150-gpadc.c which goes against the original
intention of the design, just move it to its scope.
Fixes: 1b432840d0 ("MIPS: RB532: GPIO register offsets are relative to GPIOBASE")
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the
return value of it to prevent potential wrong memory access or
memory leak.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check it to
prevent potential wrong memory access.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was
around task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled
making the semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where now anything left in tracehook.h is
some weird strange thing that is difficult to understand.
Eric W. Biederman (15):
ptrace: Move ptrace_report_syscall into ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Remove tracehook_signal_handler
task_work: Remove unnecessary include from posix_timers.h
task_work: Introduce task_work_pending
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
resume_user_mode: Move to resume_user_mode.h
tracehook: Remove tracehook.h
ptrace: Move setting/clearing ptrace_message into ptrace_stop
ptrace: Return the signal to continue with from ptrace_stop
Jann Horn (1):
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
Yang Li (1):
ptrace: Remove duplicated include in ptrace.c
MAINTAINERS | 1 -
arch/Kconfig | 5 +-
arch/alpha/kernel/ptrace.c | 5 +-
arch/alpha/kernel/signal.c | 4 +-
arch/arc/kernel/ptrace.c | 5 +-
arch/arc/kernel/signal.c | 4 +-
arch/arm/kernel/ptrace.c | 12 +-
arch/arm/kernel/signal.c | 4 +-
arch/arm64/kernel/ptrace.c | 14 +--
arch/arm64/kernel/signal.c | 4 +-
arch/csky/kernel/ptrace.c | 5 +-
arch/csky/kernel/signal.c | 4 +-
arch/h8300/kernel/ptrace.c | 5 +-
arch/h8300/kernel/signal.c | 4 +-
arch/hexagon/kernel/process.c | 4 +-
arch/hexagon/kernel/signal.c | 1 -
arch/hexagon/kernel/traps.c | 6 +-
arch/ia64/kernel/process.c | 4 +-
arch/ia64/kernel/ptrace.c | 6 +-
arch/ia64/kernel/signal.c | 1 -
arch/m68k/kernel/ptrace.c | 5 +-
arch/m68k/kernel/signal.c | 4 +-
arch/microblaze/kernel/ptrace.c | 5 +-
arch/microblaze/kernel/signal.c | 4 +-
arch/mips/kernel/ptrace.c | 5 +-
arch/mips/kernel/signal.c | 4 +-
arch/nds32/include/asm/syscall.h | 2 +-
arch/nds32/kernel/ptrace.c | 5 +-
arch/nds32/kernel/signal.c | 4 +-
arch/nios2/kernel/ptrace.c | 5 +-
arch/nios2/kernel/signal.c | 4 +-
arch/openrisc/kernel/ptrace.c | 5 +-
arch/openrisc/kernel/signal.c | 4 +-
arch/parisc/kernel/ptrace.c | 7 +-
arch/parisc/kernel/signal.c | 4 +-
arch/powerpc/kernel/ptrace/ptrace.c | 8 +-
arch/powerpc/kernel/signal.c | 4 +-
arch/riscv/kernel/ptrace.c | 5 +-
arch/riscv/kernel/signal.c | 4 +-
arch/s390/include/asm/entry-common.h | 1 -
arch/s390/kernel/ptrace.c | 1 -
arch/s390/kernel/signal.c | 5 +-
arch/sh/kernel/ptrace_32.c | 5 +-
arch/sh/kernel/signal_32.c | 4 +-
arch/sparc/kernel/ptrace_32.c | 5 +-
arch/sparc/kernel/ptrace_64.c | 5 +-
arch/sparc/kernel/signal32.c | 1 -
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/signal_64.c | 4 +-
arch/um/kernel/process.c | 4 +-
arch/um/kernel/ptrace.c | 5 +-
arch/x86/kernel/ptrace.c | 1 -
arch/x86/kernel/signal.c | 5 +-
arch/x86/mm/tlb.c | 1 +
arch/xtensa/kernel/ptrace.c | 5 +-
arch/xtensa/kernel/signal.c | 4 +-
block/blk-cgroup.c | 2 +-
fs/coredump.c | 1 -
fs/exec.c | 1 -
fs/io-wq.c | 6 +-
fs/io_uring.c | 11 +-
fs/proc/array.c | 1 -
fs/proc/base.c | 1 -
include/asm-generic/syscall.h | 2 +-
include/linux/entry-common.h | 47 +-------
include/linux/entry-kvm.h | 2 +-
include/linux/posix-timers.h | 1 -
include/linux/ptrace.h | 81 ++++++++++++-
include/linux/resume_user_mode.h | 64 ++++++++++
include/linux/sched/signal.h | 17 +++
include/linux/task_work.h | 5 +
include/linux/tracehook.h | 226 -----------------------------------
include/uapi/linux/ptrace.h | 2 +-
kernel/entry/common.c | 19 +--
kernel/entry/kvm.c | 9 +-
kernel/exit.c | 3 +-
kernel/livepatch/transition.c | 1 -
kernel/ptrace.c | 47 +++++---
kernel/seccomp.c | 1 -
kernel/signal.c | 62 +++++-----
kernel/task_work.c | 4 +-
kernel/time/posix-cpu-timers.c | 1 +
mm/memcontrol.c | 2 +-
security/apparmor/domain.c | 1 -
security/selinux/hooks.c | 1 -
85 files changed, 372 insertions(+), 495 deletions(-)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=uEro
-----END PGP SIGNATURE-----
Merge tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if
there are any legacy userspace applications still using it,
the Android kernel images will maintain it, the community
shouldn't care about it anymore
- wfx wifi driver major cleanups. Should be ready to merge out
of staging soon, and will coordinate with the wifi maintainers
after -rc1 is out
- major cleanups and unwinding of the layers of the r8188eu
driver. It's amazing just how many unneeded layers of
abstraction is in there, just when we think it's done, another
is found...
- lots of tiny coding style cleanups in many other staging
drivers.
There will be merge conflict with a fbtft change and the spi driver
changes in your tree, but it's pretty obvious what to do (the function
shouldn't return anything.)
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG1cA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylndwCfVhxKnbTYKtOs6UEr5pgPCoQCioUAn0Y2i0TG
4aFeeKUyL8VGdAitL+tp
=E6v7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.18-rc1.
Loads of tiny cleanups for almost all staging drivers in here, nothing
major at all. Highlights include:
- remove the ashmem Android driver. It is long-dead and if there are
any legacy userspace applications still using it, the Android
kernel images will maintain it, the community shouldn't care about
it anymore
- wfx wifi driver major cleanups. Should be ready to merge out of
staging soon, and will coordinate with the wifi maintainers after
-rc1 is out
- major cleanups and unwinding of the layers of the r8188eu driver.
It's amazing just how many unneeded layers of abstraction is in
there, just when we think it's done, another is found...
- lots of tiny coding style cleanups in many other staging drivers.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits)
staging: r8188eu: remove unnecessary memset in r8188eu
staging: greybus: introduce pwm_ops::apply
staging: rts5208: Resolve checkpatch.pl issues.
staging: sm750fb: fix naming style
staging: fbtft: Consider type of init sequence values in fbtft_init_display()
staging: fbtft: Constify buf parameter in fbtft_dbg_hex()
staging: mmal-vchiq: clear redundant item named bulk_scratch
mips: dts: ralink: add MT7621 SoC
staging: r8188eu: remove some unused local ieee80211 macros
staging: r8188eu: make rtl8188e_process_phy_info static
staging: r8188eu: remove unused function prototype
staging: r8188eu: remove three unused receive defines
staging: r8188eu: remove unnecessary initializations
staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST"
MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS
staging: r8188eu: proper error handling in rtw_init_drv_sw
staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv
staging: vt6656: Removed unused variable vt3342_vnt_threshold
staging: vt6656: Removed unused variable bb_vga_0
staging: remove ashmem
...
-----BEGIN PGP SIGNATURE-----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=5Q9H
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Move the VGA arbiter from drivers/gpu to drivers/pci because it's
PCI-specific, not GPU-specific (Bjorn Helgaas)
- Select the default VGA device consistently whether it's enumerated
before or after VGA arbiter init, which fixes arches that enumerate
PCI devices late (Huacai Chen)
Resource management:
- Support BAR sizes up to 8TB (Dongdong Liu)
PCIe native device hotplug:
- Fix "Command Completed" tracking to avoid spurious timouts when
powering off empty slots (Liguang Zhang)
- Quirk Qualcomm devices that don't implement Command Completed
correctly, again to avoid spurious timeouts (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist
(Michael J. Ruhl)
APM X-Gene PCIe controller driver:
- Revert generic DT parsing changes that broke some machines in the
field (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Allow controller probe to succeed even when no devices currently
present to allow hot-add later (Fabio Estevam)
- Enable power management on i.MX6QP (Richard Zhu)
- Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no
device is connected (Richard Zhu)
Marvell Aardvark PCIe controller driver:
- Fix MSI and MSI-X support (Marek Behún, Pali Rohár)
- Add support for ERR and PME interrupts (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Add DT binding and support for "num-lanes" (Pali Rohár)
- Add support for INTx interrupts (Pali Rohár)
Microsoft Hyper-V host bridge driver:
- Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun
Feng)
Qualcomm PCIe controller driver:
- Add SM8450 DT binding and driver support (Dmitry Baryshkov)
Renesas R-Car PCIe controller driver:
- Help the controller get to the L1 state since the hardware can't do
it on its own (Marek Vasut)
- Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek
Vasut)
SiFive FU740 PCIe controller driver:
- Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks)
- Force 2.5GT/s for initial device probe (Ben Dooks)
Socionext UniPhier Pro5 controller driver:
- Add NX1 DT binding and driver support (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Restore MSI configuration so MSI works after resume (Jisheng
Zhang)"
* tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
x86/PCI: Add #includes to asm/pci_x86.h
PCI: ibmphp: Remove unused assignments
PCI: cpqphp: Remove unused assignments
PCI: fu740: Remove unused assignments
PCI: kirin: Remove unused assignments
PCI: Remove unused assignments
PCI: Declare pci_filp_private only when HAVE_PCI_MMAP
PCI: Avoid broken MSI on SB600 USB devices
PCI: fu740: Force 2.5GT/s for initial device probe
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present
PCI: imx6: Invoke the PHY exit function after PHY power off
PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception
PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()
PCI: dwc: Restore MSI Receiver mask during resume
PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup
PCI/VGA: Replace full MIT license text with SPDX identifier
PCI/VGA: Use unsigned format string to print lock counts
PCI/VGA: Log bridge control messages when adding devices
...
Merge yet more updates from Andrew Morton:
"This is the material which was staged after willystuff in linux-next.
Subsystems affected by this patch series: mm (debug, selftests,
pagecache, thp, rmap, migration, kasan, hugetlb, pagemap, madvise),
and selftests"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (113 commits)
selftests: kselftest framework: provide "finished" helper
mm: madvise: MADV_DONTNEED_LOCKED
mm: fix race between MADV_FREE reclaim and blkdev direct IO read
mm: generalize ARCH_HAS_FILTER_PGPROT
mm: unmap_mapping_range_tree() with i_mmap_rwsem shared
mm: warn on deleting redirtied only if accounted
mm/huge_memory: remove stale locking logic from __split_huge_pmd()
mm/huge_memory: remove stale page_trans_huge_mapcount()
mm/swapfile: remove stale reuse_swap_page()
mm/khugepaged: remove reuse_swap_page() usage
mm/huge_memory: streamline COW logic in do_huge_pmd_wp_page()
mm: streamline COW logic in do_swap_page()
mm: slightly clarify KSM logic in do_swap_page()
mm: optimize do_wp_page() for fresh pages in local LRU pagevecs
mm: optimize do_wp_page() for exclusive pages in the swapcache
mm/huge_memory: make is_transparent_hugepage() static
userfaultfd/selftests: enable hugetlb remap and remove event testing
selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test
mm: enable MADV_DONTNEED for hugetlb mappings
kasan: disable LOCKDEP when printing reports
...
MADV_DONTNEED historically rejects mlocked ranges, but with MLOCK_ONFAULT
and MCL_ONFAULT allowing to mlock without populating, there are valid use
cases for depopulating locked ranges as well.
Users mlock memory to protect secrets. There are allocators for secure
buffers that want in-use memory generally mlocked, but cleared and
invalidated memory to give up the physical pages. This could be done with
explicit munlock -> mlock calls on free -> alloc of course, but that adds
two unnecessary syscalls, heavy mmap_sem write locks, vma splits and
re-merges - only to get rid of the backing pages.
Users also mlockall(MCL_ONFAULT) to suppress sustained paging, but are
okay with on-demand initial population. It seems valid to selectively
free some memory during the lifetime of such a process, without having to
mess with its overall policy.
Why add a separate flag? Isn't this a pretty niche usecase?
- MADV_DONTNEED has been bailing on locked vmas forever. It's at least
conceivable that someone, somewhere is relying on mlock to protect
data from perhaps broader invalidation calls. Changing this behavior
now could lead to quiet data corruption.
- It also clarifies expectations around MADV_FREE and maybe
MADV_REMOVE. It avoids the situation where one quietly behaves
different than the others. MADV_FREE_LOCKED can be added later.
- The combination of mlock() and madvise() in the first place is
probably niche. But where it happens, I'd say that dropping pages
from a locked region once they don't contain secrets or won't page
anymore is much saner than relying on mlock to protect memory from
speculative or errant invalidation calls. It's just that we can't
change the default behavior because of the two previous points.
Given that, an explicit new flag seems to make the most sense.
[hannes@cmpxchg.org: fix mips build]
Link: https://lkml.kernel.org/r/20220304171912.305060-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error
when CONFIG_NUMA=y:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
(.init.text+0x1714): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data'
Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data'
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
- Rewrite how munlock works to massively reduce the contention
on i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
=n9Ad
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
... and call node_dev_init() after memory_dev_init() from driver_init(),
so before any of the existing arch/subsys calls. All online nodes should
be known at that point: early during boot, arch code determines node and
zone ranges and sets the relevant nodes online; usually this happens in
setup_arch().
This is in line with memory_dev_init(), which initializes the memory
device subsystem and creates all memory block devices.
Similar to memory_dev_init(), panic() if anything goes wrong, we don't
want to continue with such basic initialization errors.
The important part is that node_dev_init() gets called after
memory_dev_init() and after cpu_dev_init(), but before any of the relevant
archs call register_cpu() to register the new cpu device under the node
device. The latter should be the case for the current users of
topology_init().
Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Anatoly Pugachev <matorola@gmail.com> (sparc64)
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable
-----BEGIN PGP SIGNATURE-----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=5nac
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"New features:
- NFSv3 support in NFSD is now always built
- Added NFSD support for the NFSv4 birth-time file attribute
- Added support for storing and displaying sockaddrs in trace points
- NFSD now recognizes RPC_AUTH_TLS probes
Performance improvements:
- Optimized the svc transport enqueuing mechanism
- Added micro-optimizations for the duplicate reply cache
Notable bug fixes:
- Allocation of the NFSD file cache hash table is more reliable"
* tag 'nfsd-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (30 commits)
nfsd: fix using the correct variable for sizeof()
nfsd: use correct format characters
NFSD: prevent integer overflow on 32 bit systems
NFSD: prevent underflow in nfssvc_decode_writeargs()
fs/lock: documentation cleanup. Replace inode->i_lock with flc_lock.
NFSD: Fix nfsd_breaker_owns_lease() return values
NFSD: Clean up _lm_ operation names
arch: Remove references to CONFIG_NFSD_V3 in the default configs
NFSD: Remove CONFIG_NFSD_V3
nfsd: more robust allocation failure handling in nfsd_file_cache_init
SUNRPC: Teach server to recognize RPC_AUTH_TLS
NFSD: Move svc_serv_ops::svo_function into struct svc_serv
NFSD: Remove svc_serv_ops::svo_module
SUNRPC: Remove svc_shutdown_net()
SUNRPC: Rename svc_close_xprt()
SUNRPC: Rename svc_create_xprt()
SUNRPC: Remove svo_shutdown method
SUNRPC: Merge svc_do_enqueue_xprt() into svc_enqueue_xprt()
SUNRPC: Remove the .svo_enqueue_xprt method
SUNRPC: Record endpoint information in trace log
...
Whether or not the platform supports PMD sized pages, we need to
provide pmd_pfn() for an upcoming patch.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Unit node addresses should not have leading 0x:
Warning (unit_address_format): /nemc@13410000/efuse@d0/eth-mac-addr@0x22: unit name should not have leading "0x"
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
a 5-port 10/100/1000 switch/PHY and one RGMII.
Add the devicetrees for GB-PC1 and GB-PC2 devices which use MT7621 SoC.
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220315160149.3617-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In arch/mips/include/asm/prom.h, it should use "!CONFIG_USE_OF"
after #else and #endif.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There exists many same definitions of device_tree_init() for various
platforms, add a weak function in arch/mips/kernel/prom.c to clean
up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
pgd page is freed by generic implementation pgd_free() since commit
f9cb654cb5 ("asm-generic: pgalloc: provide generic pgd_free()"),
however, there are scenarios that the system uses more than one page as
the pgd table, in such cases the generic implementation pgd_free() won't
be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and
MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER"
will be set as "1", which will cause allocating two pages as the pgd
table. Well, at the same time, the generic implementation pgd_free()
just free one pgd page, which will result in the memory leak.
The memory leak can be easily detected by executing shell command:
"while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"
Fixes: f9cb654cb5 ("asm-generic: pgalloc: provide generic pgd_free()")
Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_kmac().
Fixes: 9e21c7e40b ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes: 73b4390fb2 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
From: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Phil Sutter <n0-1@freewrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Daniel Walter <dwalter@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Unfortunately, Clang did not have support for "sp" as a global register
definition, and was crashing after the addition of current_stack_pointer.
This has been fixed in Clang 14, but earlier Clang versions need to
avoid this code, so add a versioned test and revert back to the
open-coded asm instances. Fixes Clang build error:
fatal error: error in backend: Invalid register name global variable
Fixes: 200ed341b8 ("mips: Implement "current_stack_pointer"")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/YikTQRql+il3HbrK@dev-arch.thelio-3990X
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Yanteng Si <siyanteng01@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As done with other image addresses in other architectures, use an
explicit flexible array instead of "address of char", which can trip
bounds checking done by the compiler. Found when building with
-Warray-bounds:
In file included from ./include/linux/byteorder/little_endian.h:5,
from ./arch/mips/include/uapi/asm/byteorder.h:15,
from ./arch/mips/include/asm/bitops.h:21,
from ./include/linux/bitops.h:33,
from ./include/linux/kernel.h:22,
from arch/mips/boot/compressed/decompress.c:13:
arch/mips/boot/compressed/decompress.c: In function 'decompress_kernel':
./include/asm-generic/unaligned.h:14:8: warning: array subscript -1 is outside array bounds of 'unsigned char[1]' [-Warray-bounds]
14 | __pptr->x; \
| ~~~~~~^~~
./include/uapi/linux/byteorder/little_endian.h:35:51: note: in definition of macro '__le32_to_cpu'
35 | #define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
| ^
./include/asm-generic/unaligned.h:32:21: note: in expansion of macro '__get_unaligned_t'
32 | return le32_to_cpu(__get_unaligned_t(__le32, p));
| ^~~~~~~~~~~~~~~~~
arch/mips/boot/compressed/decompress.c:29:37: note: while referencing '__image_end'
29 | extern unsigned char __image_begin, __image_end;
| ^~~~~~~~~~~
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move set_notify_resume and tracehook_notify_resume into resume_user_mode.h.
While doing that rename tracehook_notify_resume to resume_user_mode_work.
Update all of the places that included tracehook.h for these functions to
include resume_user_mode.h instead.
Update all of the callers of tracehook_notify_resume to call
resume_user_mode_work.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-12-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename tracehook_report_syscall_{entry,exit} to
ptrace_report_syscall_{entry,exit} and place them in ptrace.h
There is no longer any generic tracehook infractructure so make
these ptrace specific functions ptrace specific.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Newest Loongson-3 processors have moved to use LoongArch architecture.
Sadly, the LL/SC issue is still existing on both latest Loongson-3
processors using MIPS64 (Loongson-3A4000) and LoongArch
(Loongson-3A5000).
As it's very unlikely there will be new Loongson-3 processors using
MIPS64, let's stop people from false hoping.
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Cc: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The platforms where the kernel should be loaded above 0x8000.0000 do not
support loading u-boot images, that doesn't mean that we shouldn't be
able to generate them.
Additionally, since commit 79876cc1d7 ("MIPS: new Kconfig option
ZBOOT_LOAD_ADDRESS"), the $(zload-y) variable was no longer hardcoded,
which made it impossible to use the uzImage.bin target.
Fixes: 79876cc1d7 ("MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It makes no sense to fall through to `break'. Therefore reorder the
switch statements so as to have the Cavium cases first, followed by the
default case, which improves readability and pacifies code analysis
tools. No change in semantics, assembly produced is exactly the same.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: bc431d2153 ("MIPS: Fix fall-through warnings for Clang")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Recent tightening of the opcode table in binutils so as to consistently
disallow the assembly or disassembly of CP0 instructions not supported
by the processor architecture chosen has caused a regression like below:
arch/mips/dec/prom/locore.S: Assembler messages:
arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'
in a piece of code used to probe for memory with PMAX DECstation models,
which have non-REX firmware. Those computers always have an R2000 CPU
and consequently the exception handler used in memory probing uses the
RFE instruction, which those processors use.
While adding 64-bit support this code was correctly excluded for 64-bit
configurations, however it should have also been excluded for irrelevant
32-bit configurations. Do this now then, and only enable PMAX memory
probing for R3k systems.
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Include the DECstation interrupt handler in opting out of
FPU support.
Fixes a linker error:
mips-linux-ld: arch/mips/dec/int-handler.o: in function `fpu':
(.text+0x148): undefined reference to `handle_fpe_int'
Fixes: 183b40f992 ("MIPS: Allow FP support to be disabled")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: linux-mips@vger.kernel.org
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With KCFLAGS="-O3", I was able to trigger a fortify-source
memcpy() overflow panic on set_vi_srs_handler().
Although O3 level is not supported in the mainline, under some
conditions that may've happened with any optimization settings,
it's just a matter of inlining luck. The panic itself is correct,
more precisely, 50/50 false-positive and not at the same time.
From the one side, no real overflow happens. Exception handler
defined in asm just gets copied to some reserved places in the
memory.
But the reason behind is that C code refers to that exception
handler declares it as `char`, i.e. something of 1 byte length.
It's obvious that the asm function itself is way more than 1 byte,
so fortify logics thought we are going to past the symbol declared.
The standard way to refer to asm symbols from C code which is not
supposed to be called from C is to declare them as
`extern const u8[]`. This is fully correct from any point of view,
as any code itself is just a bunch of bytes (including 0 as it is
for syms like _stext/_etext/etc.), and the exact size is not known
at the moment of compilation.
Adjust the type of the except_vec_vi_*() and related variables.
Make set_handler() take `const` as a second argument to avoid
cast-away warnings and give a little more room for optimization.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
of_node_put(np) needs to be called when pdev == NULL.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To follow the existing per-arch conventions replace open-coded uses
of asm "sp" as "current_stack_pointer". This will let it be used in
non-arch places (like HARDENED_USERCOPY).
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yanteng Si <siyanteng01@gmail.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It was the intention to reverse the bits, not make them all zero by
using logical NOT operator.
Fixes: cc19db8b31 ("MIPS: ralink: mt7621: do memory detection on KSEG1")
Suggested-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Christoph Hellwig and a few others spent a huge effort on removing
set_fs() from most of the important architectures, but about half the
other architectures were never completed even though most of them don't
actually use set_fs() at all.
I did a patch for microblaze at some point, which turned out to be fairly
generic, and now ported it to most other architectures, using new generic
implementations of access_ok() and __{get,put}_kernel_nocheck().
Three architectures (sparc64, ia64, and sh) needed some extra work,
which I also completed.
* 'set_fs-4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
uaccess: fix integer overflow on access_ok()
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Before unifying the mips version of __access_ok() with the generic
code, this converts it to the same algorithm. This is a change in
behavior on mips64, as now address in the user segment, the lower
2^62 bytes, is taken to be valid, relying on a page fault for
addresses that are within that segment but not valid on that CPU.
The new version should be the most effecient way to do this, but
it gets rid of the special handling for size=0 that most other
architectures ignore as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Address errors have always been treated as unaliged accesses and handled
as such. But address errors are also issued for illegal accesses like
user to kernel space or accesses outside of implemented spaces. This
change implements Linux exception handling for accesses to the illegal
space above the CPU implemented maximum virtual user address and the
MIPS 64bit architecture maximum. With this we can now use a fixed value
for the maximum task size on every MIPS CPU and get a more optimized
access_ok().
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nine architectures are still missing __{get,put}_kernel_nofault:
alpha, ia64, microblaze, nds32, nios2, openrisc, sh, sparc32, xtensa.
Add a generic version that lets everything use the normal
copy_{from,to}_kernel_nofault() code based on these, removing the last
use of get_fs()/set_fs() from architecture-independent code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I'm doing some thread necromancy of
https://lore.kernel.org/lkml/202007081624.82FA0CC1EA@keescook/
x86, arm64, and arm32 adjusted their READ_IMPLIES_EXEC logic to better
align with the safer defaults and the interactions with other mappings,
which I illustrated with this comment on x86:
/*
* An executable for which elf_read_implies_exec() returns TRUE will
* have the READ_IMPLIES_EXEC personality flag set automatically.
*
* The decision process for determining the results are:
*
* CPU: | lacks NX* | has NX, ia32 | has NX, x86_64 |
* ELF: | | | |
* ---------------------|------------|------------------|----------------|
* missing PT_GNU_STACK | exec-all | exec-all | exec-none |
* PT_GNU_STACK == RWX | exec-stack | exec-stack | exec-stack |
* PT_GNU_STACK == RW | exec-none | exec-none | exec-none |
*
* exec-all : all PROT_READ user mappings are executable, except when
* backed by files on a noexec-filesystem.
* exec-none : only PROT_EXEC user mappings are executable.
* exec-stack: only the stack and PROT_EXEC user mappings are
* executable.
*
* *this column has no architectural effect: NX markings are ignored by
* hardware, but may have behavioral effects when "wants X" collides with
* "cannot be X" constraints in memory permission flags, as in
* https://lkml.kernel.org/r/20190418055759.GA3155@mellanox.com
*
*/
For MIPS, the "lacks NX" above is the "!cpu_has_rixi" check. On x86,
we decided that the READ_IMPLIES_EXEC flag needed to reflect the
expectations, not the architectural behavior due to bad interactions
as noted above, as always returning "1" on non-NX hardware breaks
some mappings.
The other part of the issue is "what does the MIPS toolchain do for
PT_GNU_STACK?" The answer seems to be "by default, include PT_GNU_STACK,
but mark it executable" (likely due to concerns over non-NX hardware):
$ mipsel-linux-gnu-gcc -o hello_world hello_world.c
$ llvm-readelf -lW hellow_world | grep GNU_STACK
GNU_STACK 0x000000 0x00000000 0x00000000 0x00000 0x00000 RWE 0x10
Given that older hardware doesn't support non-executable memory, it
seems safe to make the "PT_GNU_STACK is absent" logic mean "assume
non-executable", but this might break very old software running on
modern MIPS. This situation matches the ia32-on-x86_64 logic x86
uses (which assumes needing READ_IMPLIES_EXEC in that situation). But
modern toolchains on modern MIPS hardware should follow a safer default
(assume NX stack).
A follow-up to this change would be to switch the MIPS toolchain to emit
a non-executable PT_GNU_STACK, as this seems to be unneeded.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Cc: Juxin Gao <gaojuxin@loongson.cn>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of ar2315_pci_irq_domain_ops is to pass its address to
irq_domain_add_linear() which takes a pointer to const struct
irq_domain_ops. Make it const to allow the compiler to put it in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of these structs is to pass their address to either
irq_domain_add_tree() or irq_domain_create_linear(), both which takes
pointers to const struct irq_domain_ops. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The only usage of these structs is to pass their address to either
irq_domain_add_tree() or irq_domain_create_linear(), both which takes
pointers to const struct irq_domain_ops. Make them const to allow the
compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The major part for workaround handling has already moved to config
options. This change replaces the remaining defines by already
available config options and gets rid of war.h
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Correct a typo/pasto: setnocoherentio() should set
dma_default_coherent to false, not true.
Fixes: 14ac09a65e ("MIPS: refactor the runtime coherent vs noncoherent DMA indicators")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add these PCI class codes to pci_ids.h:
PCI_CLASS_BRIDGE_PCI_NORMAL
PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE
Use these defines in all kernel code for describing PCI class codes for
normal and subtractive PCI bridges.
[bhelgaas: similar change in pci-mvebu.c]
Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
asm/shmbuf.h is currently excluded from the UAPI compile-test because of
the errors like follows:
HDRTEST usr/include/asm/shmbuf.h
In file included from ./usr/include/asm/shmbuf.h:6,
from <command-line>:
./usr/include/asm-generic/shmbuf.h:26:33: error: field ‘shm_perm’ has incomplete type
26 | struct ipc64_perm shm_perm; /* operation perms */
| ^~~~~~~~
./usr/include/asm-generic/shmbuf.h:27:9: error: unknown type name ‘size_t’
27 | size_t shm_segsz; /* size of segment (bytes) */
| ^~~~~~
./usr/include/asm-generic/shmbuf.h:40:9: error: unknown type name ‘__kernel_pid_t’
40 | __kernel_pid_t shm_cpid; /* pid of creator */
| ^~~~~~~~~~~~~~
./usr/include/asm-generic/shmbuf.h:41:9: error: unknown type name ‘__kernel_pid_t’
41 | __kernel_pid_t shm_lpid; /* pid of last operator */
| ^~~~~~~~~~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t and by
including proper headers.
Then, remove the no-header-test entry from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
linux/signal.h and asm/signal.h are currently excluded from the UAPI
compile-test because of the errors like follows:
HDRTEST usr/include/asm/signal.h
In file included from <command-line>:
./usr/include/asm/signal.h:103:9: error: unknown type name ‘size_t’
103 | size_t ss_size;
| ^~~~~~
The errors can be fixed by replacing size_t with __kernel_size_t.
Then, remove the no-header-test entries from user/include/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),
2-core 2-thread-per-core interAptiv (CPS-driven) started emitting
the following:
[ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))
[ 0.048183] ------------[ cut here ]------------
[ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240
[ 0.048220] Modules linked in:
[ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f
[ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1
[ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000
[ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000
[ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34
[ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933
[ 0.048389] ...
[ 0.048396] Call Trace:
[ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140
[ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80
[ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4
[ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c
[ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240
[ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80
[ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140
[ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140
[ 0.048523] [<8106593c>] start_secondary+0xbc/0x280
[ 0.048539]
[ 0.048543] ---[ end trace 0000000000000000 ]---
[ 0.048636] Synchronize counters for CPU 1: done.
...for each but CPU 0/boot.
Basic debug printks right before the mentioned line say:
[ 0.048170] CPU: 1, smt_mask:
So smt_mask, which is sibling mask obviously, is empty when entering
the function.
This is critical, as sched_core_cpu_starting() calculates
core-scheduling parameters only once per CPU start, and it's crucial
to have all the parameters filled in at that moment (at least it
uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on
MIPS).
A bit of debugging led me to that set_cpu_sibling_map() performing
the actual map calculation, was being invocated after
notify_cpu_start(), and exactly the latter function starts CPU HP
callback round (sched_core_cpu_starting() is basically a CPU HP
callback).
While the flow is same on ARM64 (maps after the notifier, although
before calling set_cpu_online()), x86 started calculating sibling
maps earlier than starting the CPU HP callbacks in Linux 4.14 (see
[0] for the reference). Neither me nor my brief tests couldn't find
any potential caveats in calculating the maps right after performing
delay calibration, but the WARN splat is now gone.
The very same debug prints now yield exactly what I expected from
them:
[ 0.048433] CPU: 1, smt_mask: 0-1
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
It's reported that current memory detection code occasionally detects
larger memory under some bootloaders.
Current memory detection code tests whether address space wraps around
on KSEG0, which is unreliable because it's cached.
Rewrite memory size detection to perform the same test on KSEG1 instead.
While at it, this patch also does the following two things:
1. use a fixed pattern instead of a random function pointer as the magic
value.
2. add an additional memory write and a second comparison as part of the
test to prevent possible smaller memory detection result due to
leftover values in memory.
Fixes: 139c949f7f MIPS: ("ralink: mt7621: add memory detection support")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Originally we proposed a new hdmi-5v-supply regulator reference
for CI20 device tree but that was superseded by a better idea to use
the already defined "ddc-en-gpios" property of the "hdmi-connector".
Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already
been applied to v5.17-rc1, we add this on top.
Fixes: ae1b8d2c2d ("MIPS: DTS: CI20: Add DT nodes for HDMI setup")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This configuration is useful for boot testing malta_defconfig in QEMU
with just a simple cpio initrd, instead of a full ext4 rootfs.
This results in an increase of ~164KB of vmlinux (with GCC 11.2.0):
$ diskus vmlinux.before
11.19 MB (11,194,368 bytes)
$ diskus vmlinux.after
11.36 MB (11,358,208 bytes)
This size increase comes from the fact that usr/Kconfig is sourced when
CONFIG_BLK_DEV_INITRD is enabled, which defaults to supporting several
decompression algorithms for compressed initrds. This seems like a
reasonable tradeoff but these configurations could be disabled in the
future if there are complaints about the size increase.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch enables KCSAN for the 64-bit version. Updated rules
for the incompatible compilation units (vdso, boot/compressed).
Signed-off-by: Nemanja Rakovic <nemanja.rakovic@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This flag is not supported by clang, which results in a warning:
clang-14: warning: argument unused during compilation: '-mno-branch-likely' [-Wunused-command-line-argument]
This breaks cc-option, which adds -Werror to make this warning fatal and
catch flags that are not supported.
Wrap this flag in cc-option so that it does not cause cc-option to fail,
which can cause randconfigs to be really noisy, due to warnings not
getting disabled that should be.
Additionally, move the cc-option check to Kconfig so that the check is
done at configuration time, rather than build time, as builds with no
configuration change will be quicker because the cc-option call will not
need to happen in those instances.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This Makefile checks that GCC is 4.9 or newer, which is redundant after
commit 76ae847497 ("Documentation: raise minimum supported version of
GCC to 5.1"), so cc-option can be removed.
Clang does not support -march=loongson3a so it needs to continue to use
-march=mips64r2, which no longer needs cc-option because all supported
clang versions recognize this flag.
-march=loonson3a can be used unconditionally with GCC because the
minimum supported GCC version has been bumped past 4.9.0, which won't
have the bug mentioned in the comment. The _MIPS_ISA macro redefinition
can be removed at the same time for the same reason.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Adds support for QCN550x, which appears to be very similar to QCA956x.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
* A couple of fixes when handling an exception while a SError has been delivered
* Workaround for Cortex-A510's single-step erratum
RISCV:
* Make CY, TM, and IR counters accessible in VU mode
* Fix SBI implementation version
x86:
* Report deprecation of x87 features in supported CPUID
* Preparation for fixing an interrupt delivery race on AMD hardware
* Sparse fix
All except POWER and s390:
* Rework guest entry code to correctly mark noinstr areas and fix vtime'
accounting (for x86, this was already mostly correct but not entirely;
for ARM, MIPS and RISC-V it wasn't)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmH+E4AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNujwf+ON/8pBWyMPdjiY5l5SyNLpRup8Su
zkQoMEDICI7khYUz2bEAjOazFWHmHPsdogAlG82QeJCbFmCqyMb6iX0uWj53BdGP
P2bOM/tXbulvKBBeiTritkUUNO+hBmmSF+57AOJSW+Enhc7HFwk54cuft6f30r+d
JRaEOhPOP34hQ+wFQQhZZh72BaZBqgnrYwZDp1TiC0Wh8v7P4Nf+NFtEgba2nsxC
xfz5PrEhvegtU8Ee9JAF2bAl7851WJq557P2cOpghtUMgh4t6GzCcUOCKIie67oQ
0Vaf+OieAopdT+QNazSEWO9zxl7eTpWjk2hrwsDrgKHAL/YmuWJuSyEYIA==
=C0LZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- A couple of fixes when handling an exception while a SError has
been delivered
- Workaround for Cortex-A510's single-step erratum
RISC-V:
- Make CY, TM, and IR counters accessible in VU mode
- Fix SBI implementation version
x86:
- Report deprecation of x87 features in supported CPUID
- Preparation for fixing an interrupt delivery race on AMD hardware
- Sparse fix
All except POWER and s390:
- Rework guest entry code to correctly mark noinstr areas and fix
vtime' accounting (for x86, this was already mostly correct but not
entirely; for ARM, MIPS and RISC-V it wasn't)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Use ERR_PTR_USR() to return -EFAULT as a __user pointer
KVM: x86: Report deprecated x87 features in supported CPUID
KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata
KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occurs
KVM: arm64: Avoid consuming a stale esr value when SError occur
RISC-V: KVM: Fix SBI implementation version
RISC-V: KVM: make CY, TM, and IR counters accessible in VU mode
kvm/riscv: rework guest entry logic
kvm/arm64: rework guest entry logic
kvm/x86: rework guest entry logic
kvm/mips: rework guest entry logic
kvm: add guest_state_{enter,exit}_irqoff()
KVM: x86: Move delivery of non-APICv interrupt into vendor code
kvm: Move KVM_GET_XSAVE2 IOCTL definition at the end of kvm.h
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
-----BEGIN PGP SIGNATURE-----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=Mbx/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.17, take #2
- A couple of fixes when handling an exception while a SError has been
delivered
- Workaround for Cortex-A510's single-step[ erratum
In kvm_arch_vcpu_ioctl_run() we use guest_enter_irqoff() and
guest_exit_irqoff() directly, with interrupts masked between these. As
we don't handle any timer ticks during this window, we will not account
time spent within the guest as guest time, which is unfortunate.
Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.
This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
In addition, as guest exits during the "run the vcpu" step are handled
by kvm_mips_handle_exit(), a wrapper function is added which ensures
that such exists are handled with a sequence:
guest_state_exit_irqoff();
< handle the exit >
guest_state_enter_irqoff();
This means that exits which stop the vCPU running will have a redundant
guest_state_enter_irqoff() .. guest_state_exit_irqoff() sequence, which
can be addressed with future rework.
Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_mips_enter_exit_vcpu() helper which is marked
noinstr.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Message-Id: <20220201132926.3301912-6-mark.rutland@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix all kernel-doc warnings in mips/kvm/vz.c as reported by the
kernel test robot:
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_compare' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_cause' not described in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'compare' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:471: warning: Excess function parameter 'cause' description in '_kvm_vz_save_htimer'
arch/mips/kvm/vz.c:1551: warning: No description found for return value of 'kvm_trap_vz_handle_cop_unusable'
arch/mips/kvm/vz.c:1552: warning: expecting prototype for kvm_trap_vz_handle_cop_unusuable(). Prototype was for kvm_trap_vz_handle_cop_unusable() instead
arch/mips/kvm/vz.c:1597: warning: No description found for return value of 'kvm_trap_vz_handle_msa_disabled'
Fixes: c992a4f6a9 ("KVM: MIPS: Implement VZ support")
Fixes: f4474d50c7 ("KVM: MIPS/VZ: Support hardware guest timer")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: kvm@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the SO_TXREHASH socket option to control hash rethink behavior per socket.
When default mode is set, sockets disable rehash at initialization and use
sysctl option when entering listen state. setsockopt() overrides default
behavior.
Signed-off-by: Akhmat Karakotov <hmukos@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds