Local invalidate is also a kind of memory management operation, not only
memory bind operation. Furthermore, as invalidate operations include local
and remote, add prefix to the prompt message to make it clearer.
Link: https://lore.kernel.org/r/1617698772-13871-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Link: https://lore.kernel.org/r/20210407154900.3486268-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To update xlt (during mlx5_ib_reg_user_mr()), the driver can request up to
1 MB (order-8) memory, depending on the size of the MR. This costly
allocation can sometimes take very long to return (a few seconds). This
causes the calling application to hang for a long time, especially when
the system is fragmented. To avoid these long latency spikes, the calls
the higher order allocations need to fail faster in case they are not
available.
In order to acheive this we need __GFP_NORETRY flag in the gfp_mask before
during fetching the free pages. Allow the algorithm to automatically fall
back to smaller page sizes.
Link: https://lore.kernel.org/r/1617425635-35631-1-git-send-email-praveen.kannoju@oracle.com
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Remove the unused function sdma_iowait_schedule().
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/1617026791-89997-1-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The code currently assumes that the mmu_notifier struct
embedded in mmu_rb_handler only contains two fields.
There are now extra fields:
struct mmu_notifier {
struct hlist_node hlist;
const struct mmu_notifier_ops *ops;
struct mm_struct *mm;
struct rcu_head rcu;
unsigned int users;
};
Given that there in no init for the mmu_notifier, a kzalloc() should
be used to insure that any newly added fields are given a predictable
initial value of zero.
Fixes: 06e0ffa693 ("IB/hfi1: Re-factor MMU notification code")
Link: https://lore.kernel.org/r/1617026056-50483-9-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Adam Goldman <adam.goldman@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces that were vital in isolating an issue with pq waitlist in
commit fa8dac3968 ("IB/hfi1: Fix another case where pq is left on
waitlist")
Link: https://lore.kernel.org/r/1617026056-50483-8-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hfi1_ipoib_send() directly calls hfi1_ipoib_send_dma() with no value add.
Fix by renaming hfi1_ipoib_send_dma() to hfi1_ipoib_send().
Link: https://lore.kernel.org/r/1617026056-50483-6-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The call is from an ISR context and napi_schedule_irqoff() can be used.
Change the call to the more efficient type.
Link: https://lore.kernel.org/r/1617026056-50483-5-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The completion ring for tx is using the wrong size to size the ring,
oversizing the ring by two orders of magniture.
Correct the allocation size and use kcalloc_node() to allocate the ring.
Fix mistaken GFP defines in similar allocations.
Link: https://lore.kernel.org/r/1617026056-50483-4-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current rdma_netdev handling in ipoib hooks the tx_timeout handler,
but prints out a totally useless message that prevents effective debugging
especially when multiple transmit queues are being used.
Add a tx_timeout rdma_netdev hook and implement the callback in the hfi1
to print additional information.
The existing non-helpful message is avoided when the driver has presented
a callback.
Link: https://lore.kernel.org/r/1617026056-50483-3-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add traces to allow for debugging issues with AIP tx.
Link: https://lore.kernel.org/r/1617026056-50483-2-git-send-email-dennis.dalessandro@cornelisnetworks.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipv6 bit is wrongly set by the below which causes fatal adapter lookup
engine errors for ipv4 connections while destroying a listener. Fix it to
properly check the local address for ipv6.
Fixes: 3408be145a ("RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server")
Link: https://lore.kernel.org/r/20210331135715.30072-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.
Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports both normal and record doorbell mode for RQ and CQ, SQ
record doorbell for userspace is also supported by the software for
flushing CQE process. As now the capability of HIP08 are exposed to the
user and are configurable, the support of normal doorbell should be added
back.
Note that, if switching to normal doorbell, the kernel will report "flush
cqe is unsupported" if modify qp to error status as the flush is based on
record doorbell.
Link: https://lore.kernel.org/r/1616840738-7866-2-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Encapsulate configuring GMV base address and other type of HEM table into
two separate functions to make process of setting HEM clearer.
Link: https://lore.kernel.org/r/1616815294-13434-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.
Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Max io size is limited by both remote buffer size and the max fr pages per
mr.
Link: https://lore.kernel.org/r/20210325153308.1214057-20-gi-oh.kim@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Before receiving the session name, the error message cannot include any
information about which connection generates the error.
This patch stores the addresses of source and target in the sessname field
to show which generates the error. That field will be over-written
when receiving the session name from client.
Link: https://lore.kernel.org/r/20210325153308.1214057-17-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is common code converting addresses of source machine and
destination machine to a string. We already have a struct rtrs_addr to
store two addresses. This patch introduces a new function that converts
two addresses into one string with struct rtrs_addr.
Link: https://lore.kernel.org/r/20210325153308.1214057-14-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Let these cases share the same path since all of them need to close
session.
Link: https://lore.kernel.org/r/20210325153308.1214057-11-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The two members are not used in the code, so remove them.
Link: https://lore.kernel.org/r/20210325153308.1214057-10-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We can remove the label after move put_device to the right place.
Link: https://lore.kernel.org/r/20210325153308.1214057-9-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to dereference 's' from 'sess', since we have "sess =
to_clt_sess(s)" before.
And we can deference 'dev' from 's' earlier.
Link: https://lore.kernel.org/r/20210325153308.1214057-8-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of congestion control algorithm includes DCQCN, LDCP, HC3 and
DIP. The driver will select one of them according to the firmware when
querying PF capabilities, and then set the related configuration fields
into QPC.
Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new type of command to query mac id of functions from the firmware,
it is used to select the template of congestion algorithm. More info will
be supported in the future.
Link: https://lore.kernel.org/r/1616679236-7795-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On RoCE systems, a CM REQ contains a Primary Hop Limit > 1 and Primary
Subnet Local is zero.
In cm_req_handler(), the cm_process_routed_req() function is called. Since
the Primary Subnet Local value is zero in the request, and since this is
RoCE (Primary Local LID is permissive), the following statement will be
executed:
IBA_SET(CM_REQ_PRIMARY_SL, req_msg, wc->sl);
This corrupts SL in req_msg if it was different from zero. In other words,
a request to setup a connection using an SL != zero, will not be honored,
and a connection using SL zero will be created instead.
Fixed by not calling cm_process_routed_req() on RoCE systems, the
cm_process_route_req() is only for IB anyhow.
Fixes: 3971c9f6db ("IB/cm: Add interim support for routed paths")
Link: https://lore.kernel.org/r/1616420132-31005-1-git-send-email-haakon.bugge@oracle.com
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().
Link: https://lore.kernel.org/r/20210331020105.4858-1-tangyizhou@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Tang Yizhou <tangyizhou@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In the original rxe implementation it was intended to use a common object
to represent MRs and MWs but they are different enough to separate these
into two objects.
This allows replacing the mem name with mr for MRs which is more
consistent with the style for the other objects and less likely to be
confusing. This is a long patch that mostly changes mem to mr where it
makes sense and adds a new rxe_mw struct.
Link: https://lore.kernel.org/r/20210325212425.2792-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The strlcpy function doesn't limit the source length, use the preferred
strscpy function instead.
Link: https://lore.kernel.org/r/20210329120131.18793-1-galpress@amazon.com
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The device is got by isert_device_get() with refcount is 1, and is
assigned to isert_conn by
isert_conn->device = device.
When isert_create_qp() failed, device will be freed with
isert_device_put().
Later, the device is used in isert_free_login_buf(isert_conn) by the
isert_conn->device->ib_device statement.
Free the device in the correct order.
Fixes: ae9ea9ed38 ("iser-target: Split some logic in isert_connect_request to routines")
Link: https://lore.kernel.org/r/20210322161325.7491-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct the following spelling errors:
1. shold -> should
2. uncontext -> ucontext
Link: https://lore.kernel.org/r/1616147749-49106-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, ODP caps are set during the init stage of mlx5_ib_dev,
regardless of whether the device profile supports ODP or not. There is no
point in setting ODP caps if the device profile doesn't support
ODP. Hence, move setting the ODP caps to the odp_init stage.
Link: https://lore.kernel.org/r/20210318135259.681264-1-leon@kernel.org
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Initial drop action support missed that drop action can be added to egress
flow tables as well. Add the missing support.
This requires making sure that dest_type isn't set to PORT which in turn
exposes a possibility of passing dst while indicating number of dsts as
zero. Explicitly check for number of dsts and pass the appropriate
pointer.
Fixes: f29de9eee7 ("RDMA/mlx5: Add support for drop action in DV steering")
Link: https://lore.kernel.org/r/20210318135123.680759-1-leon@kernel.org
Reviewed-by: Mark Bloch <markb@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Success is returned in the following flows:
* New mode is the same as the current one.
* Switched to new mode and there are no bound counters yet.
Link: https://lore.kernel.org/r/20210318110502.673676-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the L2 driver detects a device crash or device undergone reset, it
invokes a stop callback to recover from error.
The current RoCE driver doesn't recover the device. So move the device to
error state and dispatch fatal events to all qps Release the MSIx vectors
to avoid a crash when L2 driver disables the MSIx. Also, check for the
device state to avoid posting further commands to the HW.
Link: https://lore.kernel.org/r/1615968942-30970-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of sync
- Longstanding cxgb4 adaptor crash when destroying cm ids
-----BEGIN PGP SIGNATURE-----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=vjhp
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Not much going on, just some small bug fixes:
- Typo causing a regression in mlx5 devx
- Regression in the recent hns rework causing the HW to get out of
sync
- Long-standing cxgb4 adaptor crash when destroying cm ids"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cxgb4: Fix adapter LE hash errors while destroying ipv6 listening server
RDMA/hns: Fix bug during CMDQ initialization
RDMA/mlx5: Fix typo in destroy_mkey inbox
Not setting the ipv6 bit while destroying ipv6 listening servers may
result in potential fatal adapter errors due to lookup engine memory hash
errors. Therefore always set ipv6 field while destroying ipv6 listening
servers.
Fixes: 830662f6f0 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://lore.kernel.org/r/20210324190453.8171-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Implement the ops named get_dev_fw_str to support ib_get_device_fw_str().
Link: https://lore.kernel.org/r/1615882161-53827-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to create the ODP EQ if the user doesn't use ODP MRs.
Hence, create it only when the first ODP MR is created. This EQ will be
destroyed only when the device is unloaded.
This will decrease the number of EQs created per device. for example: If
we creates 1K devices (SF/VF/etc'), than we will decrease the num of EQs
by 1K.
Link: https://lore.kernel.org/r/20210314125418.179716-1-leon@kernel.org
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
It's incorrect to cast the type of pointer to xrcdn from (u32 *) to
(unsigned long *), then pass it into hns_roce_bitmap_alloc(), this will
lead to a memory corruption.
Fixes: 32548870d4 ("RDMA/hns: Add support for XRC on HIP09")
Link: https://lore.kernel.org/r/1616381069-51759-1-git-send-email-liweihang@huawei.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit ee1c60b1bf ("IB/SA: Modify SA to implicitly cache Class Port
info") removed the class_port_info_context struct usage, remove a couple
of leftovers.
Link: https://lore.kernel.org/r/20210314143427.76101-1-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch fixes bunch of kernel-doc compilation warnings like below:
drivers/infiniband/hw/i40iw/i40iw_cm.c:4372: warning: expecting prototype for i40iw_ifdown_notify(). Prototype was for i40iw_if_notify() instead
Link: https://lore.kernel.org/r/20210314133908.291945-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following smatch error:
drivers/infiniband/hw/mlx5/mr.c:1950 mlx5_ib_dereg_mr() error: uninitialized symbol 'rc'.
Fixes: e6fb246cca ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Link: https://lore.kernel.org/r/20210314082250.10143-1-leon@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When reloading driver, the head/tail pointer of CMDQ may be not at
position 0. Then during initialization of CMDQ, if head is reset first,
the firmware will start to handle CMDQ because the head is not equal to
the tail. The driver can reset tail first since the firmware will be
triggerred only by head. This bug is introduced by changing macros of
head/tail register without changing the order of initialization.
Fixes: 292b3352bd ("RDMA/hns: Adjust fields and variables about CMDQ tail/head")
Link: https://lore.kernel.org/r/1615602611-7963-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that each representor stores a pointer to the managing E-Switch
use that information when creating the send-to-vport rules.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Now that a pointer to the managing E-Switch is stored in the representor
use it.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The umem DMA list calculation was locked at 4k pages due to confusion
around how this API works and is used when larger pages are present.
The conclusion is:
- umem's cannot extend past what is mapped into the process, so creating
a lage page size and referring to a sub-range is not allowed
- umem's must always have a page offset of zero, except for sub PAGE_SIZE
umems
- The feature of umem_offset to create multiple objects inside a umem
is buggy and isn't used anyplace. Thus we can assume all users of the
current API have umem_offset == 0 as well
Provide a new page size calculator that limits the DMA list to the VA
range and enforces umem_offset == 0.
Allow user space to specify the page sizes which it can accept, this
bitmap must be derived from the intended use of the umem, based on
per-usage HW limitations.
Link: https://lore.kernel.org/r/20210304130501.1102577-4-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change uverbs_get_const/uverbs_get_const_default to work properly with
both signed/unsigned parameters.
Current APIs mix s64 and u64 which leads to incorrect check when u64
value was supplied and its upper bit was set. In that case
uverbs_get_const() / uverbs_get_const_default() lower bound check may
fail unexpectedly, target is unsigned (lower bound is 0) but value
became negative as of the s64 usage.
Split to have two different APIs, no change to callers as the required
API will be called internally according to the target type.
Link: https://lore.kernel.org/r/20210304130501.1102577-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The WARN_ON() issued as part of ib_umem_find_best_pgsz() blocked cases
when only page sizes larger than PAGE_SIZE were set, drop it to enable
those cases.
In addition, there is no need to have a specific check for zero
pgsz_bitmap, the function will do its job and return 0 at the end if
nothing match will be found.
Link: https://lore.kernel.org/r/20210304130501.1102577-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Correct the map between mlx5 rates and corresponding ib rates, as they
don't always have a fixed offset between them.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20210304124517.1100608-4-leon@kernel.org
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_is_roce_enabled returns the devlink RoCE init value, therefore it
should be used only when driver is loaded. Instead we just need to read
the roce_en field.
In addition, rename mlx5_is_roce_enabled to mlx5_is_roce_init_enabled.
Fixes: 7a58779edd ("IB/mlx5: Improve query port for representor port")
Link: https://lore.kernel.org/r/20210304124517.1100608-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that this is only used in a few places in mr.c give it a sensible
name. It has nothing to do with the cache and can be invoked on any
MR. DMA is stopped and the user cannot touch the MR any further once it
completes.
Link: https://lore.kernel.org/r/20210304120745.1090751-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Now that the SRCU stuff has been removed the entire MR destroy logic can
be made a lot simpler. Currently there are many different ways to destroy a
MR and it makes it really hard to do this task correctly. Route all
destruction through mlx5_ib_dereg_mr() and make it work for all
situations.
Since it turns out all the different MR types do basically the same thing
this removes a lot of knowledge of MR internals from ODP and leaves ODP
just exporting an operation to clean up children.
This fixes a few weird corner cases bugs and firmly uses the correct
ordering of the MR destruction:
- Stop parallel access to the mkey via the ODP xarray
- Stop DMA
- Release the umem
- Clean up ODP children
- Free/Recycle the MR
Link: https://lore.kernel.org/r/20210304120745.1090751-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The struct mlx5_ib_mr can be used for three different things, but only one
at a time:
- In the user MR cache
- As a kernel MR
- As a user MR
Overlay the three things into a single union with the following rules:
- If the mr is found on the cache_ent->head list then it is a cache MR
and umem == NULL. The entire union is zero after the MR is removed from
the cache.
- If umem != NULL or type == IB_MR_TYPE_USER then it is a user MR.
- If umem == NULL then it is a kernel MR
This reduces the size of struct mlx5_ib_mr to 552 bytes from 702.
The only place the three flows overlap in the code is during dereg, so add
a few extra checks along there.
Link: https://lore.kernel.org/r/20210304120745.1090751-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All of the ODP code assumes when it calls mlx5_mr_cache_alloc() the ODP
related fields are zero'd. This is true if the MR was just allocated, but
if the MR is recycled through the cache then the values are never zero'd.
This causes a bug in the odp_stats, they don't reset when the MR is
reallocated, also is_odp_implicit is never 0'd.
So we can use memset on a block of the mlx5_ib_mr reorganize the structure
to put all the data that can be zero'd by the cache at the end.
It is organized as an anonymous struct because the next patch will make
this a union.
Delete the unused smr_info. Don't set the kernel only desc_size on the
user path. No longer any need to zero mr->parent before freeing it, the
memset() will get it now.
Fixes: a3de94e3d6 ("IB/mlx5: Introduce ODP diagnostic counters")
Link: https://lore.kernel.org/r/20210304120745.1090751-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 supports XRC transport service, it greatly saves the number of
QPs required to connect all processes in a large cluster.
Link: https://lore.kernel.org/r/1614826558-35423-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Have the driver use shared CQs which provids a ~10%-20% improvement during
test.
Instead of opening a CQ for each QP per connection, a CQ for each QP will
be provided by the RDMA core driver that will be shared between the QPs on
that core reducing interrupt overhead.
Link: https://lore.kernel.org/r/20210222141551.54345-1-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set mkey_index to the correct place when preparing the destroy_mkey inbox,
this will fix the following syndrome:
mlx5_core 0000:08:00.0: mlx5_cmd_check:782:(pid 980716): DEALLOC_PD(0x801)
op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x31b635)
Link: https://lore.kernel.org/r/20210311142024.1282004-1-leon@kernel.org
Fixes: 1368ead04c ("RDMA/mlx5: Use strict get/set operations for obj_id")
Reviewed-by: Ido Kalir <idok@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Binding IPv6 address/port to AF_INET6 domain only is provided via
rdma_set_afonly(), but was not signalled to the provider. Applications
like NFS/RDMA bind the same port to both IPv4 and IPv6 addresses
simultaneously and thus rely on it working correctly.
Link: https://lore.kernel.org/r/20210219143441.1068-1-bmt@zurich.ibm.com
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
1. Don't set the ts_format bit to default when it reserved - device is
running in the old mode (free running).
2. XRC doesn't have a CQ therefore the ts format in the QP
context should be default / free running.
3. Set ts_format to WQ.
Fixes: 2fe8d4b878 ("RDMA/mlx5: Fail QP creation if the device can not support the CQE TS")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
HIP09 uses new address space to map SQ doorbell registers, the doorbell of
each QP is isolated based on the size of 64KB, which can improve the
performance in concurrency scenarios.
Link: https://lore.kernel.org/r/1614082833-23130-1-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb
which triggered a warning at 'done:' and could possibly at 'exit:'. The
WARN_ONCE() calls are not actually needed. The call to free_pkt() is
moved to the end to clearly show that all skbs are freed.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error
occurred causing an underflow on the reference counter. This code is
cleaned up to be clearer and easier to read.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When the noted patch below extending the reference taken by
rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it
was not matched by a reference in the loopback path resulting in
underflows.
Fixes: 899aba891c ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()")
Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
tcm_loop could be used like a normal block device, so we can't use
GFP_KERNEL and should use GFP_NOIO. This adds a gfp_t arg to
target_cmd_init_cdb() and converts the users. For every driver but loop
GFP_KERNEL is kept.
This will also be useful in subsequent patches where loop needs to do
target_submit_prep() from interrupt context to get a ref to the se_device,
and so it will need to use GFP_ATOMIC.
Link: https://lore.kernel.org/r/20210227170006.5077-16-michael.christie@oracle.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
target_submit_cmd_map_sgls() is being removed, so convert srpt to the new
submission API.
srpt uses target_stop_session() to sync session shutdown with LIO core, so
we use target_init_cmd()/target_submit_prep()/target_submit(), because
target_init_cmd() will detect the target_stop_session() call and return an
error.
Link: https://lore.kernel.org/r/20210227170006.5077-6-michael.christie@oracle.com
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following W=1 compilation warning:
drivers/infiniband/core/uverbs_ioctl.c:108: warning: expecting prototype for uverbs_alloc(). Prototype was for _uverbs_alloc() instead
Fixes: 461bb2eee4 ("IB/uverbs: Add a simple allocator to uverbs_attr_bundle")
Link: https://lore.kernel.org/r/20210302074214.1054299-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The W=1 allmodconfig build produces the following warning:
drivers/infiniband/hw/mlx5/odp.c:1086: warning: wrong kernel-doc identifier on line:
* Parse a series of data segments for page fault handling.
Fix it by changing /** to be /* as it is written in kernel-doc
documentation.
Fixes: 5e769e444d ("RDMA/hw/mlx5/odp: Fix formatting and add missing descriptions in 'pagefault_data_segments()'")
Link: https://lore.kernel.org/r/20210302074214.1054299-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Set err to -ENOMEM if kzalloc fails instead of 0.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Link: https://lore.kernel.org/r/20210222122343.19720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When RDMA_RXE is enabled and CRYPTO is disabled, Kbuild gives the
following warning:
WARNING: unmet direct dependencies detected for CRYPTO_CRC32
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- RDMA_RXE [=y] && (INFINIBAND_USER_ACCESS [=y] || !INFINIBAND_USER_ACCESS [=y]) && INET [=y] && PCI [=y] && INFINIBAND [=y] && INFINIBAND_VIRT_DMA [=y]
This is because RDMA_RXE selects CRYPTO_CRC32, without depending on or
selecting CRYPTO, despite that config option being subordinate to CRYPTO.
Fixes: cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/21525878.NYvzQUHefP@ubuntu-mate-laptop
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_send_cm_sidr_rep() {
spin_lock_irqsave()
cm_send_sidr_rep_locked() {
...
spin_lock_irq()
....
spin_unlock_irq() <--- this will enable interrupts
}
spin_unlock_irqrestore()
}
spin_unlock_irqrestore() expects interrupts to be disabled but the
internal spin_unlock_irq() will always enable hard interrupts.
Fix this by replacing the internal spin_{lock,unlock}_irq() with
irqsave/restore variants.
It fixes the following kernel trace:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 2 PID: 20001 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x1d/0x20
Call Trace:
_raw_spin_unlock_irqrestore+0x4e/0x50
ib_send_cm_sidr_rep+0x3a/0x50 [ib_cm]
cma_send_sidr_rep+0xa1/0x160 [rdma_cm]
rdma_accept+0x25e/0x350 [rdma_cm]
ucma_accept+0x132/0x1cc [rdma_ucm]
ucma_write+0xbf/0x140 [rdma_ucm]
vfs_write+0xc1/0x340
ksys_write+0xb3/0xe0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 87c4c774cb ("RDMA/cm: Protect access to remote_sidr_table")
Link: https://lore.kernel.org/r/20210301081844.445823-1-leon@kernel.org
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmAppPgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGeXYH/imZPBd4A1jIMehN
5HV2A53Z+MXmmaMuGj9X1KV6vsf55/xB+IhOoFdtRAIsO8c2yYSCO8i4+4R0XfYA
+/YFJeq672rojQnmh6XbpR8dugaAV7CUHy6n7KDsyvtT6EOCpwFSwkOb4X3tBRX6
TlYgm2d/xgV/wRHSgLVugK0MdFCLMAnyb7mkPfar9QrMgG1BiDKLq07xmwnS23On
TkqpJ9yZ/rJpUrrUqQYPShSO/FmA+fSfWs0CDv7EIrJ40LUScD6PZxSHWTIHtjLk
E4jFda6wuqLRVWsBwaBzUIdD0zk7X5quHRzEpbC5ga16SK6yrWvE5YJJXCguIEuZ
f3FMRYs=
=CAjn
-----END PGP SIGNATURE-----
Merge tag 'v5.11' into rdma.git for-next
Linux 5.11
Merged to resolve conflicts with RDMA rc commits
- drivers/infiniband/sw/rxe/rxe_net.c
The final logic is to call rxe_get_dev_from_net() again with the master
netdev if the packet was rx'd on a vlan. To keep the elimination of the
local variables requires a trivial edit to the code in -rc
Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
smatch gives the warning:
drivers/infiniband/ulp/rtrs/rtrs-srv.c:1805 rtrs_rdma_connect() warn: passing zero to 'PTR_ERR'
Which is trying to say smatch has shown that srv is not an error pointer
and thus cannot be passed to PTR_ERR.
The solution is to move the list_add() down after full initilization of
rtrs_srv. To avoid holding the srv_mutex too long, only hold it during the
list operation as suggested by Leon.
Fixes: 03e9b33a0f ("RDMA/rtrs: Only allow addition of path to an already established session")
Link: https://lore.kernel.org/r/20210216143807.65923-1-jinpu.wang@cloud.ionos.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current code computes a number of channels per SRP target and spreads
them equally across all online NUMA nodes. Each channel is then assigned
a CPU within this node.
In the case of unbalanced, or even unpopulated nodes, some channels do not
get a CPU associated and thus do not get connected. This causes the SRP
connection to fail.
This patch solves the issue by rewriting channel computation and
allocation:
- Drop channel to node/CPU association as it had no real effect on
locality but added unnecessary complexity.
- Tweak the number of channels allocated to reduce CPU contention when
possible:
- Up to one channel per CPU (instead of up to 4 by node)
- At least 4 channels per node, unless ch_count module parameter is
used.
Link: https://lore.kernel.org/r/9cb4d9d3-30ad-2276-7eff-e85f7ddfb411@suse.com
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leon Romanovsky says:
====================
Add an extra timestamp format for mlx5_ib device.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
* branch 'mlx5_timestamp':
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
net/mlx5: Add new timestamp mode bits
In ConnectX6Dx device, HW can work in real time timestamp mode according
to the device capabilities per RQ/SQ/QP.
When the flag IB_UVERBS_CQ_FLAGS_TIMESTAMP_COMPLETION is set, the user
expect to get TS on the CQEs in free running format, so we need to fail
the QP creation if the current mode of the device doesn't support it.
Link: https://lore.kernel.org/r/20210209131107.698833-3-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The traditional DevX CQ creation flow goes through mlx5_core_create_cq()
which checks that the given EQN corresponds to an existing EQ and attaches
a devx handler to the EQN for the CQ.
In some cases the EQ will not be a kernel EQ, but will be controlled by
modify CQ, don't block creating these just because the EQN can't be found
in the kernel.
Link: https://lore.kernel.org/r/20210211085549.1277674-1-leon@kernel.org
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
put_device() decreases the ref-count and then the device will be
cleaned-up, while at is also add missing put_device in
rtrs_srv_create_once_sysfs_root_folders
This patch solves a kmemleak error as below:
unreferenced object 0xffff88809a7a0710 (size 8):
comm "kworker/4:1H", pid 113, jiffies 4295833049 (age 6212.380s)
hex dump (first 8 bytes):
62 6c 61 00 6b 6b 6b a5 bla.kkk.
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000f1a17a6b>] dev_set_name+0xab/0xe0
[<00000000d5502e32>] rtrs_srv_create_sess_files+0x2fb/0x314 [rtrs_server]
[<00000000ed11a1ef>] rtrs_srv_info_req_done+0x631/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
Fixes: baa5b28b7a ("RDMA/rtrs-srv: Replace device_register with device_initialize and device_add")
Link: https://lore.kernel.org/r/20210212134525.103456-5-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
kmemleak reported an error as below:
unreferenced object 0xffff8880674b7640 (size 64):
comm "kworker/4:1H", pid 113, jiffies 4296403507 (age 507.840s)
hex dump (first 32 bytes):
69 70 3a 31 39 32 2e 31 36 38 2e 31 32 32 2e 31 ip:192.168.122.1
31 30 40 69 70 3a 31 39 32 2e 31 36 38 2e 31 32 10@ip:192.168.12
backtrace:
[<0000000054413611>] kstrdup+0x2e/0x60
[<0000000078e3120a>] kobject_set_name_vargs+0x2f/0xb0
[<00000000ca2be3ee>] kobject_init_and_add+0xb0/0x120
[<0000000062ba5e78>] rtrs_srv_create_sess_files+0x14c/0x314 [rtrs_server]
[<00000000b45b7217>] rtrs_srv_info_req_done+0x5b1/0x800 [rtrs_server]
[<000000008fc5aa8f>] __ib_process_cq+0x94/0x100 [ib_core]
[<00000000a9599cb4>] ib_cq_poll_work+0x32/0xc0 [ib_core]
[<00000000cfc376be>] process_one_work+0x4bc/0x980
[<0000000016e5c96a>] worker_thread+0x78/0x5c0
[<00000000c20b8be0>] kthread+0x191/0x1e0
[<000000006c9c0003>] ret_from_fork+0x3a/0x50
It is caused by the not-freed kobject of rtrs_srv_sess. The kobject
embedded in rtrs_srv_sess has ref-counter 2 after calling
process_info_req(). Therefore it must call kobject_put twice. Currently
it calls kobject_put only once at rtrs_srv_destroy_sess_files because
kobject_del removes the state_in_sysfs flag and then kobject_put in
free_sess() is not called.
This patch moves kobject_del() into free_sess() so that the kobject of
rtrs_srv_sess can be freed. And also this patch adds the missing call of
sysfs_remove_group() to clean-up the sysfs directory.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-4-jinpu.wang@cloud.ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While adding a path from the client side to an already established
session, it was possible to provide the destination IP to a different
server. This is dangerous.
This commit adds an extra member to the rtrs_msg_conn_req structure, named
first_conn; which is supposed to notify if the connection request is the
first for that session or not.
On the server side, if a session does not exist but the first_conn
received inside the rtrs_msg_conn_req structure is 1, the connection
request is failed. This signifies that the connection request is for an
already existing session, and since the server did not find one, it is an
wrong connection request.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-3-jinpu.wang@cloud.ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Lutz Pogrell <lutz.pogrell@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BUG: KASAN: stack-out-of-bounds in _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
Read of size 4 at addr ffff8880d5a7f980 by task kworker/0:1H/565
CPU: 0 PID: 565 Comm: kworker/0:1H Tainted: G O 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00 09/04/2012
Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
Call Trace:
dump_stack+0x96/0xe0
print_address_description.constprop.4+0x1f/0x300
? irq_work_claim+0x2e/0x50
__kasan_report.cold.8+0x78/0x92
? _mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
kasan_report+0x10/0x20
_mlx4_ib_post_send+0x1bd2/0x2770 [mlx4_ib]
? check_chain_key+0x1d7/0x2e0
? _mlx4_ib_post_recv+0x630/0x630 [mlx4_ib]
? lockdep_hardirqs_on+0x1a8/0x290
? stack_depot_save+0x218/0x56e
? do_profile_hits.isra.6.cold.13+0x1d/0x1d
? check_chain_key+0x1d7/0x2e0
? save_stack+0x4d/0x80
? save_stack+0x19/0x80
? __kasan_slab_free+0x125/0x170
? kfree+0xe7/0x3b0
rdma_write_sg+0x5b0/0x950 [rtrs_server]
The problem is when we send imm_wr, the type should be ib_rdma_wr, so hw
driver like mlx4 can do rdma_wr(wr), so fix it by use the ib_rdma_wr as
type for imm_wr.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Link: https://lore.kernel.org/r/20210212134525.103456-2-jinpu.wang@cloud.ionos.com
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pkt->offset field is never used except to assign it to 0. But it adds
lots of unneeded code. This patch removes the field and related code. This
causes a measurable improvement in performance.
Link: https://lore.kernel.org/r/20210211210455.3274-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ucma_process_join() allocates struct ucma_multicast mc and frees it if an
error occurs during its run. Specifically, if an error occurs in
copy_to_user(), a use-after-free might happen in the following scenario:
1. mc struct is allocated.
2. rdma_join_multicast() is called and succeeds. During its run,
cma_iboe_join_multicast() enqueues a work that will later use the
aforementioned mc struct.
3. copy_to_user() is called and fails.
4. mc struct is deallocated.
5. The work that was enqueued by cma_iboe_join_multicast() is run and
calls ucma_create_uevent() which tries to access mc struct (which is
freed by now).
Fix this bug by cancelling the work enqueued by cma_iboe_join_multicast().
Since cma_work_handler() frees struct cma_work, we don't use it in
cma_iboe_join_multicast() so we can safely cancel the work later.
The following syzkaller report revealed it:
BUG: KASAN: use-after-free in ucma_create_uevent+0x2dd/0x;3f0 drivers/infiniband/core/ucma.c:272
Read of size 8 at addr ffff88810b3ad110 by task kworker/u8:1/108
CPU: 1 PID: 108 Comm: kworker/u8:1 Not tainted 5.10.0-rc6+ #257
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: rdma_cm cma_work_handler
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xbe/0xf9 lib/dump_stack.c:118
print_address_description.constprop.0+0x3e/0×60 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0×37 mm/kasan/report.c:562
ucma_create_uevent+0x2dd/0×3f0 drivers/infiniband/core/ucma.c:272
ucma_event_handler+0xb7/0×3c0 drivers/infiniband/core/ucma.c:349
cma_cm_event_handler+0x5d/0×1c0 drivers/infiniband/core/cma.c:1977
cma_work_handler+0xfa/0×190 drivers/infiniband/core/cma.c:2718
process_one_work+0x54c/0×930 kernel/workqueue.c:2272
worker_thread+0x82/0×830 kernel/workqueue.c:2418
kthread+0x1ca/0×220 kernel/kthread.c:292
ret_from_fork+0x1f/0×30 arch/x86/entry/entry_64.S:296
Allocated by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:461 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:434
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:664 [inline]
ucma_process_join+0x16e/0×3f0 drivers/infiniband/core/ucma.c:1453
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 359:
kasan_save_stack+0x1b/0×40 mm/kasan/common.c:48
kasan_set_track+0x1c/0×30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0×30 mm/kasan/generic.c:355
__kasan_slab_free+0x112/0×160 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook mm/slub.c:1577 [inline]
slab_free mm/slub.c:3142 [inline]
kfree+0xb3/0×3e0 mm/slub.c:4124
ucma_process_join+0x22d/0×3f0 drivers/infiniband/core/ucma.c:1497
ucma_join_multicast+0xda/0×140 drivers/infiniband/core/ucma.c:1538
ucma_write+0x1f7/0×280 drivers/infiniband/core/ucma.c:1724
vfs_write fs/read_write.c:603 [inline]
vfs_write+0x191/0×4c0 fs/read_write.c:585
ksys_write+0x1a1/0×1e0 fs/read_write.c:658
do_syscall_64+0x2d/0×40 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88810b3ad100
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 16 bytes inside of
192-byte region [ffff88810b3ad100, ffff88810b3ad1c0)
Fixes: b5de0c60cc ("RDMA/cma: Fix use after free race in roce multicast join")
Link: https://lore.kernel.org/r/20210211090517.1278415-1-leon@kernel.org
Reported-by: Amit Matityahu <mitm@nvidia.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'dev' not described in 'ib_port_immutable_read'
drivers/infiniband/core/device.c:859: warning: Function parameter or member 'port' not described in 'ib_port_immutable_read'
Fixes: 7416790e22 ("RDMA/core: Introduce and use API to read port immutable data")
Link: https://lore.kernel.org/r/20210210151421.1108809-1-leon@kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix the following coccicheck warning:
./drivers/infiniband/hw/qedr/qedr.h:629:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_rq' with return type bool.
./drivers/infiniband/hw/qedr/qedr.h:620:9-10: WARNING: return of 0/1 in
function 'qedr_qp_has_sq' with return type bool.
Link: https://lore.kernel.org/r/1612949901-109873-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot<abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
FRMR is not well-supported on HIP08, it is re-designed for HIP09 and the
position of related fields is changed. Then the ULPs should be forbidden
to use FRMR on older hardwares.
Link: https://lore.kernel.org/r/1612924424-28217-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The register 0x07014 is actually the head pointer of CMDQ, and 0x07010
means tail pointer. Current definitions are confusing, so rename them and
related variables.
The next_to_use of structure hns_roce_v2_cmq_ring has the same semantics
as head, merge them into one member. The next_to_clean of structure
hns_roce_v2_cmq_ring has the same semantics as tail. After deleting
next_to_clean, tail should also be deleted.
Link: https://lore.kernel.org/r/1612688143-28226-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CMDQ works serially, after each successful transmission, the head and tail
pointers will be equal, so there is no need to check whether the queue is
full. At the same time, since the descriptor of each transmission is new,
there is no need to perform a cleanup operation. Then, the field named
next_to_clean in structure hns_roce_v2_cmq_ring is redundant.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-4-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When posting a multi-descriptors command, the error code of previous
failed descriptors may be rewrote to 0 by a later successful descriptor.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
last_status of structure hns_roce_v2_cmq has never been used, and the
variable named 'complete' in __hns_roce_cmq_send() is meaningless.
Fixes: a04ff739f2 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Link: https://lore.kernel.org/r/1612688143-28226-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When a system receives a REREG event from the SM, then the SM information
in the kernel is marked as invalid and a request is sent to the SM to
update the information. The SM information is invalid in that time period.
However, receiving a REREG also occurs simultaneously in user space
applications that are now trying to rejoin the multicast groups. Some of
those may be sendonly multicast groups which are then failing.
If the SM information is invalid then ib_sa_sendonly_fullmem_support()
returns false. That is wrong because it just means that we do not know yet
if the potentially new SM supports sendonly joins.
Sendonly join was introduced in 2015 and all the Subnet managers have
supported it ever since. So there is no point in checking if a subnet
manager supports it.
Should an old opensm get a request for a sendonly join then the request
will fail. The code that is removed here accomodated that situation and
fell back to a full join.
Falling back to a full join is problematic in itself. The reason to use
the sendonly join was to reduce the traffic on the Infiniband fabric
otherwise one could have just stayed with the regular join. So this patch
may cause users of very old opensms to discover that lots of traffic
needlessly crosses their IB fabrics.
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101281845160.13303@www.lameter.com
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Support 400Gbps IB rate in mlx5 driver.
Link: https://lore.kernel.org/r/20210209130429.698237-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
qedr_gsi_post_send() has a debug output which prints the return value of
in_irq() and irqs_disabled().
The result of the in_irq(), even if invoked from an interrupt handler, is
subject to change depending on the `threadirqs' command line switch. The
result of irqs_disabled() is always be 1 because the function acquires
spinlock_t with spin_lock_irqsave().
Remove in_irq() and irqs_disabled() from the debug output because it
provides little value.
Link: https://lore.kernel.org/r/20210208193347.383254-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch changes the type of init_send_wqe in rxe_verbs.c to void since
it always returns 0. It also separates out the code that copies inline
data into the send wqe as copy_inline_data_to_wqe().
Link: https://lore.kernel.org/r/20210206002437.2756-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
checkpatch -f found 3 warnings in RDMA/rxe
1. a missing space following switch
2. return followed by else
3. use of strlcpy() instead of strscpy().
This patch fixes each of these. In
...
} elseif (...) {
...
return 0;
} else
...
The middle block can be safely moved since it is completely independent of
the other code.
Link: https://lore.kernel.org/r/20210205230525.49068-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cleanup the synchronize_srcu() from the ODP flow as it was found to be a
very heavy time consumer as part of dereg_mr.
For example de-registration of 10000 ODP MRs each with size of 2M hugepage
took 19.6 sec comparing de-registration of same number of non ODP MRs that
took 172 ms.
The new locking scheme uses the wait_event() mechanism which follows the
use count of the MR instead of using synchronize_srcu().
By that change, the time required for the above test took 95 ms which is
even better than the non ODP flow.
Once fully dropped the srcu usage, had to come with a lock to protect the
XA access.
As part of using the above mechanism we could also clean the
num_deferred_work stuff and follow the use count instead.
Link: https://lore.kernel.org/r/20210202071309.2057998-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to use a for loop to assign values for an array of cmd
descriptors which has only two elements.
Link: https://lore.kernel.org/r/1612517974-31867-13-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The hns driver wrap around the consumer index of AEQ and CEQ when they
reach to two times of queue entries number for owner mechanism, actually,
it is unnecessary to wrap around since the hardware itself will mask it
before use.
Link: https://lore.kernel.org/r/1612517974-31867-12-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
All fields of WQE will be rewrote, so the memset is unnecessary. And when
SQ is working in OWNER mode, the pipeline may prefetch the WQEs beyond PI,
the memset operation may flip the owner bit too early, then the pipeline
may get a wrong WQ.
Link: https://lore.kernel.org/r/1612517974-31867-11-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use macros instead of magic numbers to represent shift of dma_handle_wqe,
dma_handle_idx and UDP destination port number of RoCEv2.
Link: https://lore.kernel.org/r/1612517974-31867-10-git-send-email-liweihang@huawei.com
Signed-off-by: Xinhao Liu <liuxinhao5@hisilicon.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_device.h is not specific to hardware, some definitions are only
used for HIP06, they should be moved into hns_roce_hw_v1.h.
Link: https://lore.kernel.org/r/1612517974-31867-9-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, the driver updates doorbell looks like this:
post()
{
wqe.field = 0x111;
wmb();
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
__raw_writeq(db, db_reg);
}
writeq() is a better choice than __raw_writeq() because it calls dma_wmb()
to barrier in ARM64, and dma_wmb() is better than wmb() for ROCEE device.
This patch removes all wmb() before updating doorbell of SQ/RQ/CQ/SRQ by
replacing __raw_writeq() with writeq() to improve performence. The new
process looks like this:
post()
{
wqe.field = 0x111;
update_wq_db();
}
update_wq_db()
{
db.field = 0x222;
writeq(db, db_reg);
}
Link: https://lore.kernel.org/r/1612517974-31867-8-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This feature should only be enabled by querying capability from firmware.
Fixes: ba6bb7e974 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1612517974-31867-5-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add the mapped page count checking flow to avoid invalid page size when
creating MTR.
Fixes: 38389eaa4d ("RDMA/hns: Add mtr support for mixed multihop addressing")
Link: https://lore.kernel.org/r/1612517974-31867-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This bit should be in type of enum ib_sig_type, or there will be a sparse
warning.
Fixes: bfe860351e ("RDMA/hns: Fix cast from or to restricted __le32 for driver")
Link: https://lore.kernel.org/r/1612517974-31867-3-git-send-email-liweihang@huawei.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ULP usually set IB(V)_QP_AV when trying to modify QP to RTR if they want
to record sgid index into QPC. For UD QPs, it is useless because it will
be included in WQE. For RC QPs, it will be filled in
hns_roce_set_path(). So sgid index shouldn't be filled by default. Then
hns_get_gid_index() is moved to hns_roce_hw_v1.c because it is only called
in it.
Fixes: 926a01dc00 ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1612517974-31867-2-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Direct wqe is a mechanism to fill wqe directly into the hardware. In the
case of light load, the wqe will be filled into pcie bar space of the
hardware, this will reduce one memory access operation and therefore
reduce the latency.
Link: https://lore.kernel.org/r/1611997513-27107-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The SRQ in the hns driver consists of the following four parts:
* wqe buf: the buffer to store WQE.
* wqe_idx buf: the cqe of SRQ may be not generated in the order of wqe, so
the wqe_idx corresponding to the idle WQE needs to be pushed into the
index queue which is a FIFO, then it instructs the hardware to obtain
the corresponding WQE.
* bitmap: bitmap is used to generate and release wqe_idx. When the user
has a new WR, the driver finds the idx of the idle wqe in bitmap. When
the CQE of wqe is generated, the driver will release the idx.
* wr_id buf: wr_id buf is used to store the user's wr_id, then return it
to the user when poll_cq verb is invoked.
The process of post SRQ recv is refactored to make preceding code clearer.
Link: https://lore.kernel.org/r/1611997090-48820-12-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The HIP09 requires the driver to clear the unused data segments in wqe
buffer to make the hns ROCEE stop reading the remaining invalid sges for
RQ.
Link: https://lore.kernel.org/r/1611997090-48820-11-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reduce parameter numbers of write_srqc() and move some related code into
it from alloc_srqc().
Link: https://lore.kernel.org/r/1611997090-48820-8-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Split the SRQ creation process into multiple steps and encapsulate them
into functions.
Link: https://lore.kernel.org/r/1611997090-48820-7-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Each SRQs contain an reserved WQE, it is inappropriate and should be
removed.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-6-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When an error occurs, the qp_table must be cleared, regardless of whether
the SRQ feature is enabled.
Fixes: 5c1f167af1 ("RDMA/hns: Init SRQ table for hip08")
Link: https://lore.kernel.org/r/1611997090-48820-5-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB Specification, srq_limit shouldn't be configured
during SRQ creation. If a user set srq_limit at this time, the driver
should forced it to zero, or the result of creating SRQ will conflict with
the result of querying SRQ.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-4-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a user posts WR by wr_list, the head pointer of idx_queue won't be
updated until all wqes are filled, so the judgment of whether head equals
to tail will get a wrong result. Fix above issue and move the head and
tail pointer from the srq structure into the idx_queue structure. After
idx_queue is filled with wqe idx, the head pointer of it will increase.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Link: https://lore.kernel.org/r/1611997090-48820-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The RQ/SRQ of HIP08 needs one special sge to stop receive reliably. So the
driver needs to allocate at least one SGE when creating RQ/SRQ and ensure
that at least one SGE is filled with the special value during post_recv.
Besides, the kernel driver should only do this for kernel ULP. For
userspace ULP, the userspace driver will allocate the reserved SGE in
buffer, and the kernel driver just needs to pin the corresponding size of
memory based on the userspace driver's requirements.
Link: https://lore.kernel.org/r/1611997090-48820-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by
rxe_get_dev_from_net() which should be held until each received skb is
freed. This patch moves the calls to ib_device_put() to each place a
received skb is freed. It also takes references to the ib_device for each
cloned skb created to process received multicast packets.
Fixes: 4c173f596b ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding")
Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP
header but receives packets from a UDP tunnel with skb->data pointing at
the UDP header. On the loopback path this was not correctly accounted
for. This patch corrects for this by using sbk_pull() to strip the IP
header from the skb on received packets.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
rxe_rcv_mcast_pkt() in rxe_recv.c can leak SKBs in error path code. The
loop over the QPs attached to a multicast group creates new cloned SKBs
for all but the last QP in the list and passes the SKB and its clones to
rxe_rcv_pkt() for further processing. Any QPs that do not pass some checks
are skipped. If the last QP in the list fails the tests the SKB is
leaked. This patch checks if the SKB for the last QP was used and if not
frees it. Also removes a redundant loop invariant assignment.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Fixes: 71abf20b28 ("RDMA/rxe: Handle skb_clone() failure in rxe_recv.c")
Link: https://lore.kernel.org/r/20210128174752.16128-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In check_keys() in rxe_recv.c
if ((...) && pkt->mask) {
...
}
always has pkt->mask non zero since in rxe_udp_encap_recv() pkt->mask is
always set to RXE_GRH_MASK (!= 0). There is no obvious reason for this
additional test and the original intent is lost. This patch simplifies the
expression.
Fixes: 8b7b59d030 ("IB/rxe: remove redudant qpn check")
Link: https://lore.kernel.org/r/20210127224203.2812-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
check_type_state() in rxe_recv.c is written as if the type bits in the
packet opcode were a bit mask which is not correct. This patch corrects
this code to compare all 3 type bits to the required type.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20210127214500.3707-1-rpearson@hpe.com
Signed-off-by: Bob Pearson <rpearson@hpe.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Instead of open coding the loop for port iteration, use rdma_for_each_port
macro provided by core.
To use such macro, early initialization of phys_port_cnt is needed.
Hence, initialize such constant early enough in the init stage.
Whichever functions are called with port using rdma_for_each_port(),
convert their port type from u8 to unsigned int to match the core API.
Link: https://lore.kernel.org/r/20210203130133.4057329-6-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently mlx5 driver caches port GID table length for 2 ports. It is
also cached by IB core as port immutable data.
When mlx5 representor ports are present, which are usually more than 2,
invalid access to port_caps array can happen while validating the GID
table length which is only for 2 ports.
To avoid this, take help of the IB cores port immutable data by exposing
an API to read the port immutable fields.
Remove mlx5 driver's internal cache, thereby reduce code and data.
Link: https://lore.kernel.org/r/20210203130133.4057329-5-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Improve query port functionality for representor port as below.
1. RoCE Qkey violation counters are not applicable for representor port.
2. Avoid setting gid_tbl_len twice for representor port.
3. Avoid setting ip_gids and IB_PORT_CM_SUP property for representor port
as GID table is empty and CM support is not present in representor
mode.
Link: https://lore.kernel.org/r/20210203130133.4057329-4-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pkey table length for all the ports of the device is the same. Currently
get_ports_cap() reads and stores it for each port by querying the device
which reads more than just pkey table length.
For representor device ports which can be in range of hundreds, it queries
is for each such port and end up returning same value for all the ports.
When in representor mode, modify QP accesses pkey port caps for a port
index that can be outside of the port_caps table.
Hence, simplify the logic to query the max pkey table length only once
during device initialization sequence.
Link: https://lore.kernel.org/r/20210203130133.4057329-3-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
mlx5_port_caps are RDMA specific capabilities. These are not used by the
mlx5_core_device at all. Move them to mlx5_ib_dev where it is used and
reduce the scope of it to multiple drivers.
Link: https://lore.kernel.org/r/20210203130133.4057329-2-leon@kernel.org
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>