The voice allocator sometimes begins allocating from near the end of the
array and then wraps around, however snd_emu10k1_pcm_channel_alloc()
accesses the newly allocated voices as if it never wrapped around.
This results in out of bounds access if the first voice has a high enough
index so that first_voice + requested_voice_count > NUM_G (64).
The more voices are requested, the more likely it is for this to occur.
This was initially discovered using PipeWire, however it can be reproduced
by calling aplay multiple times with 16 channels:
aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero
UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40
index 65 is out of range for type 'snd_emu10k1_voice [64]'
CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ #7
Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x3f
__ubsan_handle_out_of_bounds.cold+0x44/0x49
snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1]
snd_pcm_hw_params+0x29f/0x600 [snd_pcm]
snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm]
? exit_to_user_mode_prepare+0x35/0x170
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x26/0x50
? do_syscall_64+0x69/0x90
? exit_to_user_mode_prepare+0x35/0x170
snd_pcm_ioctl+0x27/0x40 [snd_pcm]
__x64_sys_ioctl+0x95/0xd0
do_syscall_64+0x5c/0x90
? do_syscall_64+0x69/0x90
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The last fix for trying to recover the regression on AMD platforms,
unfortunately, leaded to yet another regression: it turned out that
IOMMUs don't like the usage of raw page allocations.
This is yet another attempt for addressing the log saga; at this time,
we re-use the existing buffer allocation mechanism with SG-pages
although we require only single pages. The SG buffer allocation
itself was confirmed to work for stream buffers, so it's relatively
easy to adapt for other places.
The only problem is: although the HD-audio code is accessing the
address directly via dmab->address field, SG-pages don't set up it.
For the ease of adaption, we now set up the dmab->addr field from the
address of the first page as default, so that it can run with the
HD-audio driver code as-is without the excessive call of
snd_sgbuf_get_addr() multiple times; that's the only change in the
memalloc helper side. The rest is nothing but a flip of the dma_type
field in the HD-audio side.
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CABXGCsO+kB2t5QyHY-rUe76npr1m0-5JOtt8g8SiHUo34ur7Ww@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216112
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220906090319.23358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AZA HW may send a burst read/write request crossing 4K memory boundary.
The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to
include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K
boundary.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For devices which use HID CSC3551, correct ACPI _DSD properties are
required to be able support those systems.
Add error message to clarify this.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815162906.463108-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With jackpoll_in_suspend flag set, there is a possibility that
jack poll worker thread will run even after system suspend was
completed. Any register access after system pm callback flow
will result in kernel crash as still jack poll worker thread
tries to access registers.
To fix the crash issue during system flow, cancel the jack poll
worker thread during system pm prepare callback and cancel the
worker thread at start of runtime suspend callback and re-schedule
at last to avoid any unwarranted access of register by worker thread
during suspend flow.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Fixes: b33115bd05 ("ALSA: hda: Jack detection poll in suspend state")
Link: https://lore.kernel.org/r/20220811052704.2944-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Allen Ballway <ballway@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220810152701.1.I902c2e591bbf8de9acb649d1322fa1f291849266@changeid
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Board ID 8786 seems to be another variant of the Omen 15 that needs
ALC285_FIXUP_HP_MUTE_LED for working mute LED.
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220809142455.6473-1-bedant.patnaik@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220808073406.19460-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The variable new is initialized with a value but it is never read. It is
being re-assigned a new value in every case path in the following switch
statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/ice1712/quartet.c:569:8: warning: Although the value stored
to 'new' is used in the enclosing expression, the value is never actually
read from 'new' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220805120439.2341600-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is another Asus K42JZ model with the PCI SSID 1043:1313
that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220805074534.20003-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes speaker output on HP Spectre x360 15-eb0xxx
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Ivan Hasenkampf <ivan.hasenkampf@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220803164001.290394-1-ivan.hasenkampf@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces those usages
straightforwardly with new helpers, sysfs_emit() and sysfs_emit_at().
Link: https://lore.kernel.org/r/20220801165639.26030-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo Yoga 9 14IAP7 is set up similarly to the Thinkpad X1 7th and
8th Gen. It also has the speakers attached to NID 0x14 and the bass
speakers to NID 0x17, but here the codec misreports the NID 0x17 as
unconnected.
The pincfg and hda verbs connect and activate the bass speaker
amplifiers, but the generic driver will connect them to NID 0x06 which
has no volume control. Set connection list/preferred connections is
required to gain volume control.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220729162103.6062-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two more HP laptops that use cs35l41 AMP for speaker and GPIO for mute
LEDs.
So use the existing quirk to enable them accordingly.
[ Sort the entries at the SSID order by tiwai ]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220719142015.244426-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If CONFIG_PM_SLEEP is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
sound/pci/hda/cs35l41_hda.c:583:12: error: ‘cs35l41_runtime_resume’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~
sound/pci/hda/cs35l41_hda.c:565:12: error: ‘cs35l41_runtime_suspend’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[3]: *** [sound/pci/hda/cs35l41_hda.o] Error 1
commit 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros,
deprecate old ones"), add new marco RUNTIME_PM_OPS to fix this unused-function problem.
Fixes: 1873ebd30c ("ALSA: hda: cs35l41: Support Hibernation during Suspend")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220725023611.57055-1-renzhijie2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the recent change in CS35L41 codec requires the reference of
acpi_dev handle, the current Kconfig may lead to a build breakage.
Revert the Kconfig change and re-introduce the hard dependency on
CONFIG_ACPI again as a temporary workaround.
Fixes: eef3759602 ("ALSA: hda: cs35l41: Support reading subsystem id from ACPI")
Link: https://lore.kernel.org/r/20220715182427.18891-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When codec is unbound but not yet removed, in the eyes of
snd_hdac_bus_process_unsol_events() it is still a valid target to
delegate work to. Such behaviour may lead to use-after-free errors.
Address by verifying if codec is actually registered.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default, the driver will automatically load DSP firmware
for the amps, if available. Adding this option allows the
autoload to be optional, which allows for different configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-15-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is required to support CS35L41 calibration.
By default, speaker protection firmware will be loaded, if
available. However, different firmware is required to run
the calibration sequence, so it is necessary to add support
to be able to unload, switch and reload firmware.
This patch adds 2 ALSA Controls for each amp:
"DSP1 Firmware Load"
"DSP1 Firmware Type"
"DSP1 Firmware Load" can be used to unload and
load the firmware.
"DSP1 Firmware Type" can be used to switch the
target firmware to be loaded by "DSP1 Firmware Load"
Since loading firmware can add new ALSA controls, it is
necessary to ensure the firmware loading is run asynchronously
from the ALSA control itself to prevent deadlocks.
Note: When switching between firmwares, an ALSA control is
only added if it has not previously existed. If it had existed
previously, it will be re-enabled instead.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The config sequences for running with and without firmware and DSP
are different. The original behavior assumed that we would only
run without DSP only in the case where firmware load failed.
This meant the non-firmware sequence was written with the assumtion
that various registers would be set to their default value.
However, to support the ability to unload the firmware, the
non-firmware register sequence must be updated to update all
required registers, including values that would be defaulted,
in case the firmware sequence, which could have already run,
has changed their value.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-11-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS35L41 supports hibernation during suspend when using
DSP firmware.
When the driver suspends it will hibernate the part, if
firmware is running, and resume will wake from hibernation.
CS35L41 driver will suspend/resume when requested by
hda driver.
Note that suspend/resume and hibernation is only supported
when firmware is running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRa6sACgkQJNaLcl1U
h9Bkvwf9HJRDLQ513AIAg8QJVZ4a+vAX4dirPUkpsyxRJ9WUdaOVdYiRIwDfMKQl
Y9gH8xN3/JcLThKDuCxbyndgXEbfhu+s55VerrJ1/KAlnxZoYXcCuc+PKr78ZNCq
goMQT3EcKiJXPEXcxZVMGMsK0XaoWNycKHm/wQ+27OF8kiFs58iRvnFk27HLgd6z
ucVF7Zmj+vABIS2eou+pAvAT2Ln9OraCdwjH26nSSZ3J8z4SIvsaJXJ5Fsasevpa
ExL+RIBXTG4Xs5MH60P0P6qNV3zIuiRkLTN2BZabr7R3OHE8eW4Vz6p2QQ70eZ9R
UdusEjJONjfHwoF9jD+QIk/zv9T/BA==
=oiKM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.20
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
Some Laptops use a number of gpios to define which vendor is
used for a particular laptop.
Different coefficient files are used for different vendors.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To be able to support different firmwares and tuning
for different models, the driver needs to be able to
load a different firmware and coefficient file based
on its Subsystem ID.
The driver attempts to load the firmware in the
following order:
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>-dev<#>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>.wmfw
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some laptop models, the ACPI contains the unique
Subsystem ID, and this value should be preferred
over the value from the HDA driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Subsystem ID is read from the HDA driver, and will
be used by the CS35L41 driver to be able to uniquely
identify the laptop, which is required to be able to
define firmware to be used by specific models.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the CS35L41 DSP.
The DSP allows for extra features, such as running
speaker protection algorithms and hibernations.
To utilize these features, the driver must load
firmware into the DSP, as well as various tuning
files which allow for customization for specific
models.
[ Slightly simplified Kconfig changes by tiwai ]
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DSP controls are exposed as ALSA controls, however,
some of these controls are required to be accessed by
the driver. Add apis which allow read/write of these
controls. The write api will also notify the ALSA control
on value change.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs35l41 part contains a DSP which is able to run firmware.
The cs_dsp library can be used to control the DSP.
These controls can be exposed to userspace using ALSA controls.
This library adds apis to be able to interface between
cs_dsp and hda drivers and expose the relevant controls as
ALSA controls.
[ Note: the dependency of CONFIG_SND_HDA_CS_DSP_CONTROLS Kconfig is
corrected. Also, this Kconfig isn't enabled now but will be
actually enabled in a later patch -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple
motherboard design and they are using different subsystem ID of audio
codec. Add the same quirk for other MBs.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tasos Sahanidis