Commit dbad41e7bb ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
caused unbalanced pm_runtime_get/put() calls when the bam is
controlled remotely. This commit reverts it and just enables pm_runtime
in all cases, the clk_* functions already just nop when the clock is NULL.
Also clean up a bit by removing unnecessary bamclk null checks.
Suggested-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: dbad41e7bb ("dmaengine: qcom: bam_dma: check if the runtime pm enabled")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20220629140559.118537-1-caleb.connolly@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible and driver_data for GPI DMA engines found in Qualcomm
SC7280. The driver_data contains ee_offset of 0x10000.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220421121733.1829350-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The value parameter is a single byte, so duplicate it to the 8 byte
range that is used as the pattern.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20220301182551.883474-5-benjamin.walker@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qualcomm SM8350 platform does, like the SM8450, provide a set of GPI
controllers with an ee-offset of 0x10000. Add this to the driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220412212959.2385085-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Controller on newer SoCs like SM8450 have registers at at offset. Add
ee_offset to driver_data and add this compatible for the driver.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Newer platforms seem to have strict requirement for TRE flags which
causes transaction to timeout. This was resolved to missing chain and
link flag for duplex spi transaction.
So add these two flags.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220406132508.1029348-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the changes
across tree for that using tag dmaengine_topic_slave_id_removal_5.17
- updates for idxd driver
- at_xdmac driver cleanup
-----BEGIN PGP SIGNATURE-----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=1KYH
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of new support and few updates to drivers:
New support:
- DMA_MEMCPY_SG support is bought back as we have a user in Xilinx
driver
- Support for TI J721S2 SoC in k3-udma driver
- Support for Ingenic MDMA and BDMA in the JZ4760
- Support for Renesas r8a779f0 dmac
Updates:
- We are finally getting rid of slave_id, so this brings in the
changes across tree for that
- updates for idxd driver
- at_xdmac driver cleanup"
* tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
dt-bindings: dma-controller: Split interrupt fields in example
dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API
dmaengine: at_xdmac: Fix race over irq_status
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet()
dmaengine: at_xdmac: Fix at_xdmac_lld struct definition
dmaengine: at_xdmac: Fix lld view setting
dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work()
dmaengine: at_xdmac: Fix concurrency over xfers_list
dmaengine: at_xdmac: Move the free desc to the tail of the desc list
dmaengine: at_xdmac: Fix race for the tx desc callback
dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie
dmaengine: at_xdmac: Print debug message after realeasing the lock
dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_xdmac: Don't start transactions at tx_submit level
dmaengine: idxd: deprecate token sysfs attributes for read buffers
dmaengine: idxd: change bandwidth token to read buffers
dmaengine: idxd: fix wq settings post wq disable
dmaengine: idxd: change MSIX allocation based on per wq activation
dmaengine: idxd: fix descriptor flushing locking
dmaengine: idxd: embed irq_entry in idxd_wq struct
...
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
Tag for dmaengine slave_id removal topic branch which should be merged
into v5.17
-----BEGIN PGP SIGNATURE-----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=Mpf8
-----END PGP SIGNATURE-----
Merge tag 'dmaengine_topic_slave_id_removal_5.17' into next
Merge the tag dmaengine_topic_slave_id_removal_5.17 into next. This
brings in the slave_id removal topic changes
The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.
For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.
Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no reason to walk the MSI descriptors to retrieve the interrupt
number for a device. Use msi_get_virq() instead.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211210221815.329792721@linutronix.de
Use the common msi_index member and get rid of the pointless wrapper struct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20211210221814.413638645@linutronix.de
In some configurations, the BAM DMA controller is set up by a remote
processor and the local processor can simply start making use of it
without setting up the BAM. This is already supported using the
"qcom,controlled-remotely" property.
However, for some reason another possible configuration is that the
remote processor is responsible for powering up the BAM, but we are
still responsible for initializing it (e.g. resetting it etc).
This configuration is quite challenging to handle properly because
the power control is handled through separate channels
(e.g. device-specific SMSM interrupts / smem-states). Great care
must be taken to ensure the BAM registers are not accessed while
the BAM is powered off since this results in a bus stall.
Attempt to support this configuration with minimal device-specific
code in the bam_dma driver by tracking the number of requested
channels. Consumers of DMA channels are responsible to only request
DMA channels when the BAM was powered on by the remote processor,
and to release them before the BAM is powered off.
When the first channel is requested the BAM is initialized (reset)
and it is also put into reset when the last channel was released.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211018102421.19848-3-stephan@gerhold.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates
-----BEGIN PGP SIGNATURE-----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=yltL
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"This time around we have a smaller pull request than usual and this
includes code removal, so should be good!
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates"
* tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits)
dmaengine: imx-sdma: Remove platform data header
dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]
dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t
dmaengine: altera-msgdma: add OF support
MAINTAINERS: add entry for Altera mSGDMA
dt-bindings: dma: add schema for altera-msgdma
dmaengine: xilinx: dpdma: fix kernel-doc
dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()
dmaengine: sh: Remove unused shdma-of driver
dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
dmaengine: qcom: gpi: Add SM8250 compatible
dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail
dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
dmaengine: hsu: Account transferred bytes
dmaengine: Move kdoc description of struct dma_chan_percpu closer to it
dmaengine: xilinx: dpdma: Print debug message when losing vsync race
dmaengine: xilinx: dpdma: Print channel number in kernel log messages
dt-bindings: dma: convert arm-pl08x to yaml
dmaengine: idxd: remove devm allocation for idxd->int_handles
...
Bunch of driver fixes, notably:
- More idxd fixes for driver unregister, error handling and bus
assignment
- HAS_IOMEM depends fix for few drivers
- lock fix in pl330 driver
- xilinx drivers fixes for initialize registers, missing dependencies
and limiting descriptor IDs
- mediatek descriptor management fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmDJ9UwACgkQfBQHDyUj
g0fTYA/9ERo+2cohKCfxDdgjkvsGF1wdqFpUmg/ZGfcDyB3NEu2YKV8NhPR2+QCV
LLDScP790bfOOtM8MKd3PrRD7Qx8Rdx6BH5Fdojwf1hoeLQ1sGUYVQEs2gcXxjM+
XM20mHQvgmbpOBVDdAPlxAlFA/0ERlKSFSVOwJRTtV7haUwZM7WE3krQmjGaJpsB
MTTEVGOjVLUH3q0yxzd9DAOKPK3h/uLqHWQACxyRY4tmjIKE42SeCO63db0yXzbL
FR1dh9/S7BGm2VO0mm+ByFnmygN+w7mBNzgAYBDECsibJAa2AZX2c9xI2h6LiI/W
SKMp+NtW6yBwb4lUDQ56DY47Qzx45ZCTjmdq4+2DaHZV+ijF0rESudPDKYICdNep
dawuJjAUfI7scbpZhuNO+oAmq3ZMbpq0K6yCEPsb18hHq6b7DGlZ+LZS7vv2XElB
0VywgAV1eV4p/GpCyLOtPjS1HCC4Lq2rtW/YaAByr7ZLF0q1RXMhtuthP/sjH8zj
gys18nKSL6iBmc9dm02ITq/r5hXgjfWoqBvTQVfuTVv8vBZREQ/WalZEFSFaYtRJ
0HVn7S4H8CcsUcALrY8PSKfIIenTIsQtjpNdKdbKpuyxcjhjehjbfW13LgirgvBS
F/LNhWIZBAje1prsvbdAJSyPt5lnxD7nVPfbG+LxIloygIBp+y4=
=FL1v
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- More idxd fixes for driver unregister, error handling and bus
assignment
- HAS_IOMEM depends fix for few drivers
- lock fix in pl330 driver
- xilinx drivers fixes for initialize registers, missing dependencies
and limiting descriptor IDs
- mediatek descriptor management fixes"
* tag 'dmaengine-fix-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: use GFP_NOWAIT instead of GFP_ATOMIC in prep_dma
dmaengine: mediatek: do not issue a new desc if one is still current
dmaengine: mediatek: free the proper desc in desc_free handler
dmaengine: ipu: fix doc warning in ipu_irq.c
dmaengine: rcar-dmac: Fix PM reference leak in rcar_dmac_probe()
dmaengine: idxd: Fix missing error code in idxd_cdev_open()
dmaengine: stedma40: add missing iounmap() on error in d40_probe()
dmaengine: SF_PDMA depends on HAS_IOMEM
dmaengine: QCOM_HIDMA_MGMT depends on HAS_IOMEM
dmaengine: ALTERA_MSGDMA depends on HAS_IOMEM
dmaengine: idxd: Add missing cleanup for early error out in probe call
dmaengine: xilinx: dpdma: Limit descriptor IDs to 16 bits
dmaengine: xilinx: dpdma: Add missing dependencies to Kconfig
dmaengine: stm32-mdma: fix PM reference leak in stm32_mdma_alloc_chan_resourc()
dmaengine: zynqmp_dma: Fix PM reference leak in zynqmp_dma_alloc_chan_resourc()
dmaengine: xilinx: dpdma: initialize registers before request_irq
dmaengine: pl330: fix wrong usage of spinlock flags in dma_cyclc
dmaengine: fsl-dpaa2-qdma: Fix error return code in two functions
dmaengine: idxd: add missing dsa driver unregister
dmaengine: idxd: add engine 'struct device' missing bus type assignment
SM8250 seems to work just fine, so add a shiny new compatible for it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210614235358.444834-2-konrad.dybcio@somainline.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When CONFIG_HAS_IOMEM is not set/enabled, certain iomap() family
functions [including ioremap(), devm_ioremap(), etc.] are not
available.
Drivers that use these functions should depend on HAS_IOMEM so that
they do not cause build errors.
Rectifies these build errors:
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_probe':
hidma_mgmt.c:(.text+0x780): undefined reference to `devm_ioremap_resource'
s390-linux-ld: drivers/dma/qcom/hidma_mgmt.o: in function `hidma_mgmt_init':
hidma_mgmt.c:(.init.text+0x126): undefined reference to `of_address_to_resource'
s390-linux-ld: hidma_mgmt.c:(.init.text+0x16e): undefined reference to `of_address_to_resource'
Fixes: 67a2003e06 ("dmaengine: add Qualcomm Technologies HIDMA channel driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20210522021313.16405-3-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Place a comment in hidma_mgmt_init explaining why success must
currently be assumed, due to the cleanup issue that would need to
be considered were this module ever to be unloadable or were this
platform_driver_register call ever to fail.
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-By: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-52-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit a474b3f042.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original change is NOT correct, as it does not correctly unwind from
the resources that was allocated before the call to
platform_driver_register().
Cc: Aditya Pakki <pakki001@umn.edu>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-51-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When bam dma is "controlled remotely", thus far clocks were not controlled
from the Linux. In this scenario, Linux was disabling runtime pm in bam dma
driver and not doing any clock management in suspend/resume hooks.
With introduction of crypto engine bam dma, the clock is a rpmh resource
that can be controlled from both Linux and TZ/remote side. Now bam dma
clock is getting enabled during probe even though the bam dma can be
"controlled remotely". But due to clocks not being handled properly,
bam_suspend generates a unbalanced clk_unprepare warning during system
suspend.
To fix the above issue and to enable proper clock-management, this patch
enables runtim-pm and handles bam dma clocks in suspend/resume hooks if
the clock node is present irrespective of controlled_remotely property.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210126211859.790892-1-thara.gopinath@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When building with CONFIG_UBSAN_UNSIGNED_OVERFLOW, clang decides not to
inline gpi_update_reg, which causes a linkage failure around __bad_mask:
ld.lld: error: undefined symbol: __bad_mask
>>> referenced by bitfield.h:119 (include/linux/bitfield.h:119)
>>> dma/qcom/gpi.o:(gpi_update_reg) in archive drivers/built-in.a
>>> referenced by bitfield.h:119 (include/linux/bitfield.h:119)
>>> dma/qcom/gpi.o:(gpi_update_reg) in archive drivers/built-in.a
If gpi_update_reg is not inlined, the mask value will not be known at
compile time so the check in field_multiplier stays in the final
object file, causing the above linkage failure. Always inline
gpi_update_reg so that this check can never fail.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1243
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20210112191214.1264793-1-natechancellor@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gcc points out an incorrect error handling loop:
drivers/dma/qcom/gpi.c: In function 'gpi_ch_init':
drivers/dma/qcom/gpi.c:1254:15: error: iteration 2 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
1254 | struct gpii *gpii = gchan->gpii;
| ^~~~
drivers/dma/qcom/gpi.c:1951:2: note: within this loop
1951 | for (i = i - 1; i >= 0; i++) {
| ^~~
Change the loop to correctly walk backwards through the
initialized fields rather than off into the woods.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103135738.3741123-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The parameter of kfree function is NULL, so kfree code is useless, delete it.
Therefore, goto expression is no longer needed, so simplify it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201216130649.13979-1-zhengyongjun3@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
drivers/dma/qcom/gpi.c:1419:3: warning: format '%lu' expects argument of
type 'long unsigned int', but argument 8 has type 'size_t {aka unsigned
int}' [-Wformat=]
drivers/dma/qcom/gpi.c:1427:31: warning: format '%lu' expects argument of
type 'long unsigned int', but argument 3 has type 'size_t {aka unsigned
int}' [-Wformat=]
drivers/dma/qcom/gpi.c:1447:3: warning: format '%llx' expects argument of
type 'long long unsigned int', but argument 4 has type 'dma_addr_t {aka
unsigned int}' [-Wformat=]
drivers/dma/qcom/gpi.c:1447:3: warning: format '%llx' expects argument of
type 'long long unsigned int', but argument 5 has type 'phys_addr_t {aka
unsigned int}' [-Wformat=]
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201218104137.59200-1-nixiaoming@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
While performing suspend/resume, we were getting below kernel crash.
[ 54.541672] [FTS][Info]gesture suspend...
[ 54.605256] [FTS][Error][GESTURE]Enter into gesture(suspend) failed!
[ 54.605256]
[ 58.345850] irq event 10: bogus return value fffffff3
......
[ 58.345966] [<ffff0000080830f0>] el1_irq+0xb0/0x124
[ 58.345971] [<ffff000008085360>] arch_cpu_idle+0x10/0x18
[ 58.345975] [<ffff0000081077f4>] do_idle+0x1ac/0x1e0
[ 58.345979] [<ffff0000081079c8>] cpu_startup_entry+0x20/0x28
[ 58.345983] [<ffff000008a80ed0>] rest_init+0xd0/0xdc
[ 58.345988] [<ffff0000091c0b48>] start_kernel+0x390/0x3a4
[ 58.345990] handlers:
[ 58.345994] [<ffff0000085120d0>] bam_dma_irq
The reason for the crash we found is, bam_dma_irq() was returning
negative value when the device resumes in some conditions.
In addition, the irq handler should have one of the below return values.
IRQ_NONE interrupt was not from this device or was not handled
IRQ_HANDLED interrupt was handled by this device
IRQ_WAKE_THREAD handler requests to wake the handler thread
Therefore, to resolve this crash, we have changed the return value to
IRQ_NONE.
Signed-off-by: Parth Y Shah <sparth1292@gmail.com>
Link: https://lore.kernel.org/r/1607322820-7450-1-git-send-email-sparth1292@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update the kerneldoc function headers to fix build warnings:
drivers/dma/qcom/qcom_adm.c:180: warning: Function parameter or member 'chan' not described in 'adm_free_chan'
drivers/dma/qcom/qcom_adm.c:190: warning: Function parameter or member 'burst' not described in 'adm_get_blksize'
drivers/dma/qcom/qcom_adm.c:466: warning: Function parameter or member 'chan' not described in 'adm_terminate_all'
drivers/dma/qcom/qcom_adm.c:466: warning: Excess function parameter 'achan' description in 'adm_terminate_all'
drivers/dma/qcom/qcom_adm.c:503: warning: Function parameter or member 'achan' not described in 'adm_start_dma'
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20201126184602.GA1008@earth.li
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This controller provides DMAengine capabilities for a variety of peripheral
buses such as I2C, UART, and SPI. By using GPI dmaengine driver, bus
drivers can use a standardize interface that is protocol independent to
transfer data between memory and peripheral.
Link: https://lore.kernel.org/r/20201109085450.24843-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
controller found in the MSM8x60 and IPQ/APQ8064 platforms.
The ADM supports both memory to memory transactions and memory
to/from peripheral device transactions. The controller also provides
flow control capabilities for transactions to/from peripheral devices.
The initial release of this driver supports slave transfers to/from
peripherals and also incorporates CRCI (client rate control interface)
flow control.
The hardware only supports a 32 bit physical address, so specifying
!PHYS_ADDR_T_64BIT gives maximum COMPILE_TEST coverage without having to
spend effort on kludging things in the code that will never actually be
needed on real hardware.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Link: https://lore.kernel.org/r/20201114140233.GM32650@earth.li
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 00c4747a2f ("dmaengine: qcom: convert tasklets to use new
tasklet_setup() API") updated driver to use new tasklet_setup() API but
missed to update the documentation for the tasklet function.
Fixes: 00c4747a2f ("dmaengine: qcom: convert tasklets to use new tasklet_setup() API")
Link: https://lore.kernel.org/r/20201007083113.567559-3-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200831103542.305571-23-allen.lkml@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200508210707.GA24136@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the following coccicheck warning:
drivers/dma/qcom/hidma.c:553:1-17: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20200504113406.41530-1-yanaijie@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no need to call 'hidma_debug_uninit()' in the error handling
path. 'hidma_debug_init()' has not been called yet.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200427111043.70218-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
bam_dma_terminate_all() will leak resources if any of the transactions are
committed to the hardware (present in the desc fifo), and not complete.
Since bam_dma_terminate_all() does not cause the hardware to be updated,
the hardware will still operate on any previously committed transactions.
This can cause memory corruption if the memory for the transaction has been
reassigned, and will cause a sync issue between the BAM and its client(s).
Fix this by properly updating the hardware in bam_dma_terminate_all().
Fixes: e7c0fe2a5c ("dmaengine: add Qualcomm BAM dma driver")
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191017152606.34120-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a goto from the middle of the loop, there is
no put, thus causing a memory leak.
Hence add an of_node_put under the label that the gotos point to.
In order to avoid decrementing an already-decremented refcount, copy the
original contents of the label (including the return statement) to just
above the label, so that the code under the label is executed only when
a goto exit from the loop occurs.
Additionally, remove an unnecessary get/put pair from the loop, as the
loop itself already keeps track of refcount.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20190724081609.9724-1-nishkadg.linux@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In commit 518a2f1925
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20190715031723.6375-1-huangfq.daxian@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Add support in dmaengine core to do device node checks for DT devices and
update bunch of drivers to use that and remove open coding from drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
-----BEGIN PGP SIGNATURE-----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=R+aC
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
One space is left unused in circular FIFO to differentiate
'full' and 'empty' cases. So take that in to account while
counting for the descriptors completed.
Fixes the issue reported here,
https://lkml.org/lkml/2019/6/18/669
Cc: stable@vger.kernel.org
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove the
variables that were saving them as they were never even being used once
set.
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 and
only version 2 as published by the free software foundation this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 294 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Caleb Connolly