Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass in
a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be used
no matter what the const value is. This prevents every subsystem from
having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject, objects
as being "non-mutable". The changes to the kobject and driver core in
this pull request are the result of that, as there are lots of paths
where kobjects and device pointers are not modified at all, so marking
them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object rules.
All of this has been bike-shedded in quite a lot of detail on lkml with
different names and implementations resulting in the tiny version we
have in here, much better than my original proposal. Lots of subsystem
maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with no
problems, OTHER than some merge issues with other trees that should be
obvious when you hit them (block tree deletes a driver that this tree
modifies, iommufd tree modifies code that this tree also touches). If
there are merge problems with these trees, please let me know.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY5wz3A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yks0ACeKYUlVgCsER8eYW+x18szFa2QTXgAn2h/VhZe
1Fp53boFaQkGBjl8mGF8
=v+FB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
- Replace deprecated git://github.com link in MAINTAINERS. (Palmer Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper. (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call. (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor.
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove
a temporary workaround. (Eric Farman)
- Add an interface to get an estimated migration data size for a device,
allowing userspace to make informed decisions, ex. more accurately
predicting VM downtime. (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration. (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module.
(Jason Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers. (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state
size. (Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices. (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe.
(Shang XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing. (Dan Carpenter)
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmObfPgbHGFsZXgud2ls
bGlhbXNvbkByZWRoYXQuY29tAAoJECObm247sIsiDogP/i9GuBKposvZpnfxXWwo
oNpKBZSOVMW8wgavNEuryMb+9WoouIghce8XU49MmONoP26kIh5TA14Zpi3XWkLK
K+NlpwicESvLeZVHU7f3R8meVqmPtlxIi59jE+CfEHB8BW2HIAsEdwdhkxMwus9C
nuiiK/2YYyQWOXYc4LAIkspMzjtGPy6Im5P6AED+dI+TFCEqJAM5qgOLJZFlk4a/
WwZY2xjVKOl6xf5VZXGw+v7fDgz2Ju+j4Bm3X5lx1HgiDrEH83MjXY5h67neAIVb
bXrfNLN++MiuO5niGTFMbUjGVUIFxsfmJzBnL9QrLsuj0JrGEKsu/1JEO78g0Km0
ZCChoJ6UyUOgxt6evEymUAZAAkbcKaaht2gdbAXW71tv9p1TripAbBKwVeah1bQp
SiHPqy9InKJlhaf+GbXL9eux1WVMfQ6FZccU16bNt7VaV2I8js85z/2gqVD0a5Mw
+gnwp5XMUFWNKlJrnc7uVCD0bDExwQhr75OP4rWjMNvvLi9hPXJ2cI2Sg+9OLzQw
vm/I+Df+FfXCuGAgX4Lxq76pqWlYGJH0Qxc14Ds6YoXqygBPz9yvTtuBv8mTHJzE
KdAl/6DmZZxZ/JFD9lPF80KRiAsJ6iNf6tPTWES7hfDBfIdgQ/DZbXridLWJPNoi
xLfaW19yrLTXWKSmR7G2Lsz4
=q9xs
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
iommufd is the user API to control the IOMMU subsystem as it relates to
managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU device
specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance the
combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a
guest. Dirty tracking enables VM live migration with SRIOV devices and
PASID support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs, which
is currently VFIO and VDPA.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY5ct7wAKCRCFwuHvBreF
YZZ5AQDciXfcgXLt0UBEmWupNb0f/asT6tk717pdsKm8kAZMNAEAsIyLiKT5HqGl
s7fAu+CQ1pr9+9NKGevD+frw8Solsw4=
=jJkd
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd implementation from Jason Gunthorpe:
"iommufd is the user API to control the IOMMU subsystem as it relates
to managing IO page tables that point at user space memory.
It takes over from drivers/vfio/vfio_iommu_type1.c (aka the VFIO
container) which is the VFIO specific interface for a similar idea.
We see a broad need for extended features, some being highly IOMMU
device specific:
- Binding iommu_domain's to PASID/SSID
- Userspace IO page tables, for ARM, x86 and S390
- Kernel bypassed invalidation of user page tables
- Re-use of the KVM page table in the IOMMU
- Dirty page tracking in the IOMMU
- Runtime Increase/Decrease of IOPTE size
- PRI support with faults resolved in userspace
Many of these HW features exist to support VM use cases - for instance
the combination of PASID, PRI and Userspace IO Page Tables allows an
implementation of DMA Shared Virtual Addressing (vSVA) within a guest.
Dirty tracking enables VM live migration with SRIOV devices and PASID
support allow creating "scalable IOV" devices, among other things.
As these features are fundamental to a VM platform they need to be
uniformly exposed to all the driver families that do DMA into VMs,
which is currently VFIO and VDPA"
For more background, see the extended explanations in Jason's pull request:
https://lore.kernel.org/lkml/Y5dzTU8dlmXTbzoJ@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (62 commits)
iommufd: Change the order of MSI setup
iommufd: Improve a few unclear bits of code
iommufd: Fix comment typos
vfio: Move vfio group specific code into group.c
vfio: Refactor dma APIs for emulated devices
vfio: Wrap vfio group module init/clean code into helpers
vfio: Refactor vfio_device open and close
vfio: Make vfio_device_open() truly device specific
vfio: Swap order of vfio_device_container_register() and open_device()
vfio: Set device->group in helper function
vfio: Create wrappers for group register/unregister
vfio: Move the sanity check of the group to vfio_create_group()
vfio: Simplify vfio_create_group()
iommufd: Allow iommufd to supply /dev/vfio/vfio
vfio: Make vfio_container optionally compiled
vfio: Move container related MODULE_ALIAS statements into container.c
vfio-iommufd: Support iommufd for emulated VFIO devices
vfio-iommufd: Support iommufd for physical VFIO devices
vfio-iommufd: Allow iommufd to be used in place of a container fd
vfio: Use IOMMU_CAP_ENFORCE_CACHE_COHERENCY for vfio_file_enforced_coherent()
...
This code frees the wrong "buf" variable and results in an error pointer
dereference.
Fixes: 34e2f27143 ("vfio/mlx5: Introduce multiple loads")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/Y5IKia5SaiVxYmG5@kili
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The copy_to_user() function returns the number of bytes remaining to
be copied but we want to return a negative error code here.
Fixes: 0dce165b1a ("vfio/mlx5: Introduce vfio precopy ioctl implementation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/Y5IKVknlf5Z5NPtU@kili
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
- Core:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for PCI/MSI[-X]
and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows device
manufactures to provide implementation defined storage for MSI messages
contrary to the uniform and specification defined storage mechanisms for
PCI/MSI and PCI/MSI-X. IMS not only allows to overcome the size limitations
of the MSI-X table, but also gives the device manufacturer the freedom to
store the message in arbitrary places, even in host memory which is shared
with the device.
There have been several attempts to glue this into the current MSI code,
but after lengthy discussions it turned out that there is a fundamental
design problem in the current PCI/MSI-X implementation. This needs some
historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management was
completely different from what we have today in the actively developed
architectures. Interrupt management was completely architecture specific
and while there were attempts to create common infrastructure the
commonalities were rudimentary and just providing shared data structures and
interfaces so that drivers could be written in an architecture agnostic
way.
The initial PCI/MSI[-X] support obviously plugged into this model which
resulted in some basic shared infrastructure in the PCI core code for
setting up MSI descriptors, which are a pure software construct for holding
data relevant for a particular MSI interrupt, but the actual association to
Linux interrupts was completely architecture specific. This model is still
supported today to keep museum architectures and notorious stranglers
alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the kernel,
which was creating yet another architecture specific mechanism and resulted
in an unholy mess on top of the existing horrors of x86 interrupt handling.
The x86 interrupt management code was already an incomprehensible maze of
indirections between the CPU vector management, interrupt remapping and the
actual IO/APIC and PCI/MSI[-X] implementation.
At roughly the same time ARM struggled with the ever growing SoC specific
extensions which were glued on top of the architected GIC interrupt
controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86 vector
domain and interrupt remapping and also allowed ARM to handle the zoo of
SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that it is
not available the PCI/MSI[-X] domains have the vector domain as their
parent. This reduced the required interaction between the domains pretty
much to the initialization phase where it is obviously required to
establish the proper parent relation ship in the components of the
hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the hardware
it's clear that the actual PCI/MSI[-X] interrupt controller is not a global
entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the easy
solution of providing "global" PCI/MSI domains which was possible because
the PCI/MSI[-X] handling is uniform across the devices. This also allowed
to keep the existing PCI/MSI[-X] infrastructure mostly unchanged which in
turn made it simple to keep the existing architecture specific management
alive.
A similar problem was created in the ARM world with support for IP block
specific message storage. Instead of going all the way to stack a IP block
specific domain on top of the generic MSI domain this ended in a construct
which provides a "global" platform MSI domain which allows overriding the
irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the MSI
infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into the
existing infrastructure. Some of this just works by chance on particular
platforms but will fail in hard to diagnose ways when the driver is used
on platforms where the underlying MSI interrupt management code does not
expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront to
avoid resource exhaustion. They are expanded at run-time when the guest
actually tries to use them. The way how this is implemented is that the
host disables MSI-X and then re-enables it with a larger number of
vectors again. That works by chance because most device drivers set up
all interrupts before the device actually will utilize them. But that's
not universally true because some drivers allocate a large enough number
of vectors but do not utilize them until it's actually required,
e.g. for acceleration support. But at that point other interrupts of the
device might be in active use and the MSI-X disable/enable dance can
just result in losing interrupts and therefore hard to diagnose subtle
problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact that IMS
is not longer providing a uniform storage and configuration model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for PCI/IMS.
PCI/IMS has been verified with the work in progress IDXD driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
- Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place
-----BEGIN PGP SIGNATURE-----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=9erA
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt core and driver subsystem:
The bulk is the rework of the MSI subsystem to support per device MSI
interrupt domains. This solves conceptual problems of the current
PCI/MSI design which are in the way of providing support for
PCI/MSI[-X] and the upcoming PCI/IMS mechanism on the same device.
IMS (Interrupt Message Store] is a new specification which allows
device manufactures to provide implementation defined storage for MSI
messages (as opposed to PCI/MSI and PCI/MSI-X that has a specified
message store which is uniform accross all devices). The PCI/MSI[-X]
uniformity allowed us to get away with "global" PCI/MSI domains.
IMS not only allows to overcome the size limitations of the MSI-X
table, but also gives the device manufacturer the freedom to store the
message in arbitrary places, even in host memory which is shared with
the device.
There have been several attempts to glue this into the current MSI
code, but after lengthy discussions it turned out that there is a
fundamental design problem in the current PCI/MSI-X implementation.
This needs some historical background.
When PCI/MSI[-X] support was added around 2003, interrupt management
was completely different from what we have today in the actively
developed architectures. Interrupt management was completely
architecture specific and while there were attempts to create common
infrastructure the commonalities were rudimentary and just providing
shared data structures and interfaces so that drivers could be written
in an architecture agnostic way.
The initial PCI/MSI[-X] support obviously plugged into this model
which resulted in some basic shared infrastructure in the PCI core
code for setting up MSI descriptors, which are a pure software
construct for holding data relevant for a particular MSI interrupt,
but the actual association to Linux interrupts was completely
architecture specific. This model is still supported today to keep
museum architectures and notorious stragglers alive.
In 2013 Intel tried to add support for hot-pluggable IO/APICs to the
kernel, which was creating yet another architecture specific mechanism
and resulted in an unholy mess on top of the existing horrors of x86
interrupt handling. The x86 interrupt management code was already an
incomprehensible maze of indirections between the CPU vector
management, interrupt remapping and the actual IO/APIC and PCI/MSI[-X]
implementation.
At roughly the same time ARM struggled with the ever growing SoC
specific extensions which were glued on top of the architected GIC
interrupt controller.
This resulted in a fundamental redesign of interrupt management and
provided the today prevailing concept of hierarchical interrupt
domains. This allowed to disentangle the interactions between x86
vector domain and interrupt remapping and also allowed ARM to handle
the zoo of SoC specific interrupt components in a sane way.
The concept of hierarchical interrupt domains aims to encapsulate the
functionality of particular IP blocks which are involved in interrupt
delivery so that they become extensible and pluggable. The X86
encapsulation looks like this:
|--- device 1
[Vector]---[Remapping]---[PCI/MSI]--|...
|--- device N
where the remapping domain is an optional component and in case that
it is not available the PCI/MSI[-X] domains have the vector domain as
their parent. This reduced the required interaction between the
domains pretty much to the initialization phase where it is obviously
required to establish the proper parent relation ship in the
components of the hierarchy.
While in most cases the model is strictly representing the chain of IP
blocks and abstracting them so they can be plugged together to form a
hierarchy, the design stopped short on PCI/MSI[-X]. Looking at the
hardware it's clear that the actual PCI/MSI[-X] interrupt controller
is not a global entity, but strict a per PCI device entity.
Here we took a short cut on the hierarchical model and went for the
easy solution of providing "global" PCI/MSI domains which was possible
because the PCI/MSI[-X] handling is uniform across the devices. This
also allowed to keep the existing PCI/MSI[-X] infrastructure mostly
unchanged which in turn made it simple to keep the existing
architecture specific management alive.
A similar problem was created in the ARM world with support for IP
block specific message storage. Instead of going all the way to stack
a IP block specific domain on top of the generic MSI domain this ended
in a construct which provides a "global" platform MSI domain which
allows overriding the irq_write_msi_msg() callback per allocation.
In course of the lengthy discussions we identified other abuse of the
MSI infrastructure in wireless drivers, NTB etc. where support for
implementation specific message storage was just mindlessly glued into
the existing infrastructure. Some of this just works by chance on
particular platforms but will fail in hard to diagnose ways when the
driver is used on platforms where the underlying MSI interrupt
management code does not expect the creative abuse.
Another shortcoming of today's PCI/MSI-X support is the inability to
allocate or free individual vectors after the initial enablement of
MSI-X. This results in an works by chance implementation of VFIO (PCI
pass-through) where interrupts on the host side are not set up upfront
to avoid resource exhaustion. They are expanded at run-time when the
guest actually tries to use them. The way how this is implemented is
that the host disables MSI-X and then re-enables it with a larger
number of vectors again. That works by chance because most device
drivers set up all interrupts before the device actually will utilize
them. But that's not universally true because some drivers allocate a
large enough number of vectors but do not utilize them until it's
actually required, e.g. for acceleration support. But at that point
other interrupts of the device might be in active use and the MSI-X
disable/enable dance can just result in losing interrupts and
therefore hard to diagnose subtle problems.
Last but not least the "global" PCI/MSI-X domain approach prevents to
utilize PCI/MSI[-X] and PCI/IMS on the same device due to the fact
that IMS is not longer providing a uniform storage and configuration
model.
The solution to this is to implement the missing step and switch from
global PCI/MSI domains to per device PCI/MSI domains. The resulting
hierarchy then looks like this:
|--- [PCI/MSI] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
which in turn allows to provide support for multiple domains per
device:
|--- [PCI/MSI] device 1
|--- [PCI/IMS] device 1
[Vector]---[Remapping]---|...
|--- [PCI/MSI] device N
|--- [PCI/IMS] device N
This work converts the MSI and PCI/MSI core and the x86 interrupt
domains to the new model, provides new interfaces for post-enable
allocation/free of MSI-X interrupts and the base framework for
PCI/IMS. PCI/IMS has been verified with the work in progress IDXD
driver.
There is work in progress to convert ARM over which will replace the
platform MSI train-wreck. The cleanup of VFIO, NTB and other creative
"solutions" are in the works as well.
Drivers:
- Updates for the LoongArch interrupt chip drivers
- Support for MTK CIRQv2
- The usual small fixes and updates all over the place"
* tag 'irq-core-2022-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (134 commits)
irqchip/ti-sci-inta: Fix kernel doc
irqchip/gic-v2m: Mark a few functions __init
irqchip/gic-v2m: Include arm-gic-common.h
irqchip/irq-mvebu-icu: Fix works by chance pointer assignment
iommu/amd: Enable PCI/IMS
iommu/vt-d: Enable PCI/IMS
x86/apic/msi: Enable PCI/IMS
PCI/MSI: Provide pci_ims_alloc/free_irq()
PCI/MSI: Provide IMS (Interrupt Message Store) support
genirq/msi: Provide constants for PCI/IMS support
x86/apic/msi: Enable MSI_FLAG_PCI_MSIX_ALLOC_DYN
PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X
PCI/MSI: Provide prepare_desc() MSI domain op
PCI/MSI: Split MSI-X descriptor setup
genirq/msi: Provide MSI_FLAG_MSIX_ALLOC_DYN
genirq/msi: Provide msi_domain_alloc_irq_at()
genirq/msi: Provide msi_domain_ops:: Prepare_desc()
genirq/msi: Provide msi_desc:: Msi_data
genirq/msi: Provide struct msi_map
x86/apic/msi: Remove arch_create_remap_msi_irq_domain()
...
Instead of waiting till data transfer is complete to perform dev
compatibility, do it as soon as we have enough data to perform the
check. This will be useful when we enable the support for PRE_COPY.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-4-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The saving_migf is open in PRE_COPY state if it is supported and reads
initial device match data. hisi_acc_vf_stop_copy() is refactored to
make use of common code.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-3-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
PRECOPY IOCTL in the case of HiSiIicon ACC driver can be used to
perform the device compatibility check earlier during migration.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20221123113236.896-2-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything has been set up for MIGRATION_PRE_COPY, enable it.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-15-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Before a SAVE command is issued, a QUERY command is issued in order to
know the device data size.
In case PRE_COPY is used, the above commands are issued while the device
is running. Thus, it is possible that between the QUERY and the SAVE
commands the state of the device will be changed significantly and thus
the SAVE will fail.
Currently, if a SAVE command is failing, the driver will fail the
migration. In the above case, don't fail the migration, but don't allow
for new SAVEs to be executed while the device is in a RUNNING state.
Once the device will be moved to STOP_COPY, SAVE can be executed again
and the full device state will be read.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-14-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support PRE_COPY, mlx5 driver transfers multiple states
(images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
This patch implements the changes for the target VF to decompose the
header for each state and to write and load multiple states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-13-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During PRE_COPY the migration data FD may have a temporary "end of
stream" that is reached when the initial_bytes were read and no other
dirty data exists yet.
For instance, this may indicate that the device is idle and not
currently dirtying any internal state. When read() is done on this
temporary end of stream the kernel driver should return ENOMSG from
read(). Userspace can wait for more data or consider moving to
STOP_COPY.
To not block the user upon read() and let it get ENOMSG we add a new
state named MLX5_MIGF_STATE_PRE_COPY on the migration file.
In addition, we add the MLX5_MIGF_STATE_SAVE_LAST state to block the
read() once we call the last SAVE upon moving to STOP_COPY.
Any further error will be marked with MLX5_MIGF_STATE_ERROR and the user
won't be blocked.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-12-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio precopy ioctl returns an estimation of data available for
transferring from the device.
Whenever a user is using VFIO_MIG_GET_PRECOPY_INFO, track the current
state of the device, and if needed, append the dirty data to the
transfer FD data. This is done by saving a middle state.
As mlx5 runs the SAVE command asynchronously, make sure to query for
incremental data only once there is no active save command.
Running both in parallel, might end-up with a failure in the incremental
query command on un-tracked vhca.
Also, a middle state will be saved only after the previous state has
finished its SAVE command and has been fully transferred, this prevents
endless use resources.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As mentioned in the previous patches, mlx5 is transferring multiple
states when the PRE_COPY protocol is used. This states mechanism
requires the target VM to know the states' size in order to execute
multiple loads. Therefore, add SW header, with the needed information,
for each saved state the source VM is transferring to the target VM.
This patch implements the source VM handling of the headers, following
patch will implement the target VM handling of the headers.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In order to support PRE_COPY, mlx5 driver is transferring multiple
states (images) of the device. e.g.: the source VF can save and transfer
multiple states, and the target VF will load them by that order.
The device is saving three kinds of states:
1) Initial state - when the device moves to PRE_COPY state.
2) Middle state - during PRE_COPY phase via VFIO_MIG_GET_PRECOPY_INFO.
There can be multiple states of this type.
3) Final state - when the device moves to STOP_COPY state.
After moving to PRE_COPY state, user is holding the saving migf FD and
can use it. For example: user can start transferring data via read()
callback. Also, user can switch from PRE_COPY to STOP_COPY whenever he
sees it fits. This will invoke saving of final state.
This means that mlx5 VFIO device can be switched to STOP_COPY without
transferring any data in PRE_COPY state. Therefore, when the device
moves to STOP_COPY, mlx5 will store the final state on a dedicated queue
entry on the list.
Co-developed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-9-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor to use queue based data chunks on the migration file.
The SAVE command adds a chunk to the tail of the queue while the read()
API finds the required chunk and returns its data.
In case the queue is empty but the state of the migration file is
MLX5_MIGF_STATE_COMPLETE, read() may not be blocked but will return 0 to
indicate end of file.
This is a step towards maintaining multiple images and their meta data
(i.e. headers) on the migration file as part of next patches from the
series.
Note:
At that point, we still use a single chunk on the migration file but
becomes ready to support multiple.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-8-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Refactor migration file state to be an emum which is mutual exclusive.
As of that dropped the 'disabled' state as 'error' is the same from
functional point of view.
Next patches from the series will extend this enum for other relevant
states.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-7-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors MKEY usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each
SAVE/LOAD command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED.
We achieve it by having a new struct named mlx5_vhca_data_buffer which
holds the mkey and its related stuff as of sg_append_table,
allocated_length, etc.
The above fields were taken out from the migration file main struct,
into mlx5_vhca_data_buffer dedicated struct with the proper helpers in
place.
For now we have a single mlx5_vhca_data_buffer per migration file.
However, in coming patches we'll have multiple of them to support
multiple images.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-6-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch refactors PD usage such as its life cycle will be as of the
migration file instead of allocating/destroying it upon each SAVE/LOAD
command.
This is a preparation step towards the PRE_COPY series where multiple
images will be SAVED/LOADED and a single PD can be simply reused.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-5-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Enforce a single SAVE command at a time.
As the SAVE command is an asynchronous one, we must enforce running only
a single command at a time.
This will preserve ordering between multiple calls and protect from
races on the migration file data structure.
This is a must for the next patches from the series where as part of
PRE_COPY we may have multiple images to be saved and multiple SAVE
commands may be issued from different flows.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-4-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The optional PRE_COPY states open the saving data transfer FD before
reaching STOP_COPY and allows the device to dirty track internal state
changes with the general idea to reduce the volume of data transferred
in the STOP_COPY stage.
While in PRE_COPY the device remains RUNNING, but the saving FD is open.
Only if the device also supports RUNNING_P2P can it support PRE_COPY_P2P,
which halts P2P transfers while continuing the saving FD.
PRE_COPY, with P2P support, requires the driver to implement 7 new arcs
and exists as an optional FSM branch between RUNNING and STOP_COPY:
RUNNING -> PRE_COPY -> PRE_COPY_P2P -> STOP_COPY
A new ioctl VFIO_MIG_GET_PRECOPY_INFO is provided to allow userspace to
query the progress of the precopy operation in the driver with the idea it
will judge to move to STOP_COPY at least once the initial data set is
transferred, and possibly after the dirty size has shrunk appropriately.
This ioctl is valid only in PRE_COPY states and kernel driver should
return -EINVAL from any other migration state.
Compared to the v1 clarification, STOP_COPY -> PRE_COPY is blocked
and to be defined in future.
We also split the pending_bytes report into the initial and sustaining
values, e.g.: initial_bytes and dirty_bytes.
initial_bytes: Amount of initial precopy data.
dirty_bytes: Device state changes relative to data previously retrieved.
These fields are not required to have any bearing to STOP_COPY phase.
It is recommended to leave PRE_COPY for STOP_COPY only after the
initial_bytes field reaches zero. Leaving PRE_COPY earlier might make
things slower.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20221206083438.37807-3-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This is only 1.8k, putting it in its own module is not really
necessary. The kconfig infrastructure is still there to completely remove
it for systems that are trying for small footprint.
Put it in the main vfio.ko module now that kbuild can support multiple .c
files.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/5-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We don't need a kconfig symbol for this, just directly test CONFIG_EEH in
the few places that need it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As with the previous patch EEH is always enabled if SPAPR_TCE_IOMMU, so
move this last bit of code into the main module.
Now that this function only processes VFIO_EEH_PE_OP remove a level of
indenting as well, it is only called by a case statement that already
checked VFIO_EEH_PE_OP.
This eliminates an unnecessary module and SPAPR code in a global header.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The PPC64 kconfig is a bit of a rats nest, but it turns out that if
CONFIG_SPAPR_TCE_IOMMU is on then EEH must be too:
config SPAPR_TCE_IOMMU
bool "sPAPR TCE IOMMU Support"
depends on PPC_POWERNV || PPC_PSERIES
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config PPC_POWERNV
select FORCE_PCI
config PPC_PSERIES
select FORCE_PCI
config EEH
bool
depends on (PPC_POWERNV || PPC_PSERIES) && PCI
default y
So, just open code the call to eeh_enabled() into tce_iommu_ioctl().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The vfio_spapr_pci_eeh_open/release() functions are one line wrappers
around an arch function. Just call them directly. This eliminates some
weird exported symbols that don't need to exist.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/1-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This prepares for compiling out vfio group after vfio device cdev is
added. No vfio_group decode code should be in vfio_main.c, and neither
device->group reference should be in vfio_main.c.
No functional change is intended.
Link: https://lore.kernel.org/r/20221201145535.589687-11-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yu He <yu.he@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
To use group helpers instead of opening group related code in the
API. This prepares moving group specific code out of vfio_main.c.
Link: https://lore.kernel.org/r/20221201145535.589687-10-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This wraps the init/clean code of vfio group global variable to be
helpers, and prepares for further moving vfio group specific code into
separate file.
As container is used by group, so vfio_container_init/cleanup() is moved
into vfio_group_init/cleanup().
Link: https://lore.kernel.org/r/20221201145535.589687-9-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This refactor makes the vfio_device_open() to accept device, iommufd_ctx
pointer and kvm pointer. These parameters are generic items in today's
group path and future device cdev path. Caller of vfio_device_open()
should take care the necessary protections. e.g. the current group path
need to hold the group_lock to ensure the iommufd_ctx and kvm pointer are
valid.
This refactor also wraps the group spefcific codes in the device open and
close paths to be paired helpers like:
- vfio_device_group_open/close(): call vfio_device_open/close()
- vfio_device_group_use/unuse_iommu(): this pair is container specific.
iommufd vs. container is selected
in vfio_device_first_open().
Such helpers are supposed to be moved to group.c. While iommufd related
codes will be kept in the generic helpers since future device cdev path
also need to handle iommufd.
Link: https://lore.kernel.org/r/20221201145535.589687-8-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Then move group related logic into vfio_device_open_file(). Accordingly
introduce a vfio_device_close() to pair up.
Link: https://lore.kernel.org/r/20221201145535.589687-7-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes the DMA unmap callback registration to container be consistent
across the vfio iommufd compat mode and the legacy container mode.
In the vfio iommufd compat mode, this registration is done in the
vfio_iommufd_bind() when creating access which has an unmap callback. This
is prior to calling the open_device() op. The existing mdev drivers have
been converted to be OK with this order. So it is ok to swap the order of
vfio_device_container_register() and open_device() for legacy mode.
This also prepares for further moving group specific code into separate
source file.
Link: https://lore.kernel.org/r/20221201145535.589687-6-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids referencing device->group in __vfio_register_dev().
Link: https://lore.kernel.org/r/20221201145535.589687-5-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids decoding group fields in the common functions used by
vfio_device registration, and prepares for further moving the vfio group
specific code into separate file.
Link: https://lore.kernel.org/r/20221201145535.589687-4-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This avoids opening group specific code in __vfio_register_dev() for the
sanity check if an (existing) group is not corrupted by having two copies
of the same struct device in it. It also simplifies the error unwind for
this sanity check since the failure can be detected in the group
allocation.
This also prepares for moving the group specific code into separate
group.c.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-3-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
The vfio.group_lock is now only used to serialize vfio_group creation and
destruction, we don't need a micro-optimization of searching, unlocking,
then allocating and searching again. Just hold the lock the whole time.
Grabbed from:
https://lore.kernel.org/kvm/20220922152338.2a2238fe.alex.williamson@redhat.com/
Link: https://lore.kernel.org/r/20221201145535.589687-2-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Commit f38044e5ef ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
had fixed the unaligned bitmaps by capping the remaining iterable set at
the start of the bitmap. Although, that mistakenly worked around
iova_bitmap_set() incorrectly setting bits across page boundary.
Fix this by reworking the loop inside iova_bitmap_set() to iterate over a
range of bits to set (cur_bit .. last_bit) which may span different pinned
pages, thus updating @page_idx and @offset as it sets the bits. The
previous cap to the first page is now adjusted to be always accounted
rather than when there's only a non-zero pgoff.
While at it, make @page_idx , @offset and @nbits to be unsigned int given
that it won't be more than 512 and 4096 respectively (even a bigger
PAGE_SIZE or a smaller struct page size won't make this bigger than the
above 32-bit max). Also, delete the stale kdoc on Return type.
Cc: Avihai Horon <avihaih@nvidia.com>
Fixes: f38044e5ef ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20221129131235.38880-1-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Resolve conflicts in drivers/vfio/vfio_main.c by using the iommfd version.
The rc fix was done a different way when iommufd patches reworked this
code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container
code. If 'n' then only iommufd will provide the container service. All the
support for vfio iommu drivers, including type1, will not be built.
This allows a compilation check that no inappropriate dependencies between
the device/group and container have been created.
Link: https://lore.kernel.org/r/9-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The miscdev is in container.c, so should these related MODULE_ALIAS
statements. This is necessary for the next patch to be able to fully
disable /dev/vfio/vfio.
Fixes: cdc71fe4ec ("vfio: Move container code into drivers/vfio/container.c")
Link: https://lore.kernel.org/r/8-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Reported-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Emulated VFIO devices are calling vfio_register_emulated_iommu_dev() and
consist of all the mdev drivers.
Like the physical drivers, support for iommufd is provided by the driver
supplying the correct standard ops. Provide ops from the core that
duplicate what vfio_register_emulated_iommu_dev() does.
Emulated drivers are where it is more likely to see variation in the
iommfd support ops. For instance IDXD will probably need to setup both a
iommfd_device context linked to a PASID and an iommufd_access context to
support all their mdev operations.
Link: https://lore.kernel.org/r/7-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This creates the iommufd_device for the physical VFIO drivers. These are
all the drivers that are calling vfio_register_group_dev() and expect the
type1 code to setup a real iommu_domain against their parent struct
device.
The design gives the driver a choice in how it gets connected to iommufd
by providing bind_iommufd/unbind_iommufd/attach_ioas callbacks to
implement as required. The core code provides three default callbacks for
physical mode using a real iommu_domain. This is suitable for drivers
using vfio_register_group_dev()
Link: https://lore.kernel.org/r/6-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This makes VFIO_GROUP_SET_CONTAINER accept both a vfio container FD and an
iommufd.
In iommufd mode an IOAS will exist after the SET_CONTAINER, but it will
not be attached to any groups.
For VFIO this means that the VFIO_GROUP_GET_STATUS and
VFIO_GROUP_FLAGS_VIABLE works subtly differently. With the container FD
the iommu_group_claim_dma_owner() is done during SET_CONTAINER but for
IOMMUFD this is done during VFIO_GROUP_GET_DEVICE_FD. Meaning that
VFIO_GROUP_FLAGS_VIABLE could be set but GET_DEVICE_FD will fail due to
viability.
As GET_DEVICE_FD can fail for many reasons already this is not expected to
be a meaningful difference.
Reorganize the tests for if the group has an assigned container or iommu
into a vfio_group_has_iommu() function and consolidate all the duplicated
WARN_ON's etc related to this.
Call container functions only if a container is actually present on the
group.
Link: https://lore.kernel.org/r/5-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd doesn't establish the iommu_domains until after the device FD is
opened, even if the container has been set. This design is part of moving
away from the group centric iommu APIs.
This is fine, except that the normal sequence of establishing the kvm
wbinvd won't work:
group = open("/dev/vfio/XX")
ioctl(group, VFIO_GROUP_SET_CONTAINER)
ioctl(kvm, KVM_DEV_VFIO_GROUP_ADD)
ioctl(group, VFIO_GROUP_GET_DEVICE_FD)
As the domains don't start existing until GET_DEVICE_FD. Further,
GET_DEVICE_FD requires that KVM_DEV_VFIO_GROUP_ADD already be done as that
is what sets the group->kvm and thus device->kvm for the driver to use
during open.
Now that we have device centric cap ops and the new
IOMMU_CAP_ENFORCE_CACHE_COHERENCY we know what the iommu_domain will be
capable of without having to create it. Use this to compute
vfio_file_enforced_coherent() and resolve the ordering problems.
VFIO always tries to upgrade domains to enforce cache coherency, it never
attaches a device that supports enforce cache coherency to a less capable
domain, so the cap test is a sufficient proxy for the ultimate
outcome. iommufd also ensures that devices that set the cap will be
connected to enforcing domains.
Link: https://lore.kernel.org/r/4-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
These functions don't really assign anything anymore, they just increment
some refcounts and do a sanity check. Call them
vfio_group_[un]use_container()
Link: https://lore.kernel.org/r/3-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The only thing this function does is assert the group has an assigned
container and incrs refcounts.
The overall model we have is that once a container_users refcount is
incremented it cannot be de-assigned from the group -
vfio_group_ioctl_unset_container() will fail and the group FD cannot be
closed.
Thus we do not need to check this on every device FD open, just the
first. Reorganize the code so that only the first open and last close
manages the container.
Link: https://lore.kernel.org/r/2-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This error unwind is getting complicated. Move all the code into two
pair'd function. The functions should be called when the open_count == 1
after incrementing/before decrementing.
Link: https://lore.kernel.org/r/1-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Yu He <yu.he@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The devnode() in struct class should not be modifying the device that is
passed into it, so mark it as a const * and propagate the function
signature changes out into all relevant subsystems that use this
callback.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Justin Sanders <justin@coraid.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: John Stultz <jstultz@google.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sean Young <sean@mess.org>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Xie Yongji <xieyongji@bytedance.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: alsa-devel@alsa-project.org
Cc: dri-devel@lists.freedesktop.org
Cc: kvm@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: linux-block@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lore.kernel.org/r/20221123122523.1332370-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds