This is the optimization for SPI drive current and
signal lock condition check part for BER/PER measure
to ensure BER/PER are stable
Signed-off-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: Masayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: Hideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: Kota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: Toshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: Satoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Extra code to be able to use this stick, only digital, not analog
nor remote-control.
Signed-off-by: Marcel Stork <mjstork@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
A cosmetic change by combining two sets of boards into one set because
having the same arguments.
Signed-off-by: Marcel Stork <mjstork@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The VIN Gen3 hardware don't have Line Post-Clip capabilities as VIN Gen2
hardware have. To protect against writing outside the capture window
enable field toggle after a set number of lines have been captured.
Capturing outside the allocated capture buffer where observed on R-Car
Gen3 Salvator-XS H3 from the CVBS input if the standard is
misconfigured. That is if a PAL source is connected to the system but
the adv748x standard is set to NTSC. In this case the format reported by
the adv748x is 720x480 and that is what is used for the media pipeline.
The PAL source generates frames in the format of 720x576 and the field
is not toggled until the VSYNC is detected and at that time data have
already been written outside the allocated capture buffer.
With this change the capture in the situation described above results in
garbage frames but that is far better then writing outside the capture
buffer.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
By setting VNMC_YCAL rcar-vin can support input video in
MEDIA_BUS_FMT_UYVY8_1X16 format.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Store the group pointer before disassociating the VIN from the group.
Fixes: 3bb4c3bc85 ("media: rcar-vin: add group allocator functions")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The compatible string "renesas,rcar-gen3-vin" was added before the
Gen3 driver code was added but it's not possible to use. Each SoC in the
Gen3 series require SoC specific knowledge in the driver to function.
Remove it before it is added to any device tree descriptions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This was left over from the conversion to VB2, where the call was
getting invoked both in buffer_queue and start_streaming, which
was intermittently causing invalid opcodes on the VBI RISC queue.
This change effectively mirrors the exact same change Hans Verkuil
made in cx88-video.c in commit 389208e117 ("[media] cx88:
remove leftover start_video_dma() call").
Thanks to Daniel Glöckner for spotting the actual bug after I spent
several days trying to chase down the issue.
Fixes: 389208e117 ("[media] cx88: remove leftover start_video_dma() call")
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Thanks-to: Daniel Glöckner <daniel-gl@gmx.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.
Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The method dvb_frontend_ops::search() is defined as
returning an 'enum dvbfe_search', but the implementation in this
driver returns an 'int'.
Fix this by returning 'enum dvbfe_search' in this driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The method dvb_frontend_ops::get_frontend_algo() is defined as
returning an 'enum dvbfe_algo', but the implementation in this
driver returns an 'int'.
Fix this by returning 'enum dvbfe_algo' on drivers.
[mchehab+samsung@kernel.org: merge similar patches and patch
ddbridge-mci.c the same way]
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 7378f11498 ("media: omap2: omapfb: allow building it with
COMPILE_TEST") broke compilation without CONFIG_I2C selected.
drivers/media/platform/fsl-viu.c: In function ‘viu_of_probe’:
drivers/media/platform/fsl-viu.c:1452:7: error: implicit declaration of function ‘i2c_get_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration]
ad = i2c_get_adapter(0);
^~~~~~~~~~~~~~~
i2c_lock_adapter
drivers/media/platform/fsl-viu.c:1452:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
ad = i2c_get_adapter(0);
^
drivers/media/platform/fsl-viu.c:1534:2: error: implicit declaration of function ‘i2c_put_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration]
i2c_put_adapter(ad);
^~~~~~~~~~~~~~~
i2c_lock_adapter
Added I2C dependency in order to make all configurations work again.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit ee93340e98 ("media: ngene: deduplicate I2C adapter evaluation")
added a helper to evaluate the I2C adapter to be used for demod/tuner
attachment based on the given ngene_channel, and that helper is used in
many attach functions to initialise the i2c_adapter variable. However,
for some reason in tuner_attach_stv6110() and demod_attach_stv0900(), the
adapter evaluation wasn't removed as in all other functions. Fix (or
finalize, even) the helper use by cleaning up the superfluous I2C adapter
evaluation leftover in these two functions.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As pointed by ktest:
>> drivers/media//pci/pt1/pt1.c:1433:5: warning: "CONFIG_PM_SLEEP" is not defined, evaluates to 0 [-Wundef]
#if CONFIG_PM_SLEEP
^~~~~~~~~~~~~~~
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The value from a readl is being masked with ITE_REG_CIOCAN_MASK however
this is not being used and cfg is being re-assigned. I believe the
assignment operator should actually be instead the |= operator.
Detected by CoverityScan, CID#1467987 ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
VIDEO_CX231XX_RC requires RC_CORE, but VIDEO_CX231XX
does not require RC to compile or function.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The default is now 0, no need to override
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Trim out some unused config params. Use the i2c mux
adapter returned by frontend with the tuner.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Mostly very straight forward replace of blocks with equivalent code.
Cleanup added at end of dvb_init in case of failure.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Hauppauge 935C cannot communicate with the si2157
when using the mux adapter returned by the si2168,
so disable it to fix the device.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace zero fill memset inits with
equivalent {} in declaration
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace all usage of hard coded values with
the proper field from the board profile.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Now the board values match the hard coded
constants used in the dvb initialization.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Despite never getting called from atomic context,
usb URB memory allocations use GFP_ATOMIC, which does not sleep
for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
[mchehab+samsung@kernel.org: merged 3 similar patches into one]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As warned by smatch:
drivers/media/pci/pt1/pt1.c:213 config_demod() error: strncmp() '"tc90522sat"' too small (11 vs 20)
Use the same strncmp() syntax as pt1_init_frontends() does.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As described in Document/timers/timers-howto.txt,
hrtimer-based delay should be used for small sleeps.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Without this patch, re-loading of the module was required after resume.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
earth-pt1 was a monolithic module and included demod/tuner drivers.
This patch removes those FE parts and attach demod/tuner i2c drivers.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The tuner is used in Earthsoft PT1/PT2 DVB boards,
and the driver was extraced from (the former) va1j5jf8007s.c of PT1.
it might contain PT1 specific configs.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds a PLL "description" of Philips TDA6651 for ISDB-T.
It was extracted from (the former) va1j5jf8007t.c of EarthSoft PT1,
thus the desc might include PT1 specific configs.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
As the kernel doc "timers-howto.txt" reads,
short delay with msleep() can take much longer.
In a case of raspbery-pi platform where CONFIG_HZ_100 was set,
it actually affected the init of Friio devices
since it issues lots of i2c transactions with short delay.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This driver already contains tua6034-based device settings,
but they are not for ISDB-T and have different parameters.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
registers the module as an i2c driver,
but keeps dvb_pll_attach() untouched for compatibility.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Instead of using printk() directly, use the pr_foo()
macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Propagate the v4l2_mbus_framefmt to the source pad when either a sink
pad is activated or when the format of the active sink pad changes.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch resolves the following checkpatch.pl error:
ERROR: that open brace { should be on the previous line
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch resolves checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When capturing at yuv410p, sg_next was called too many times when chroma is
false, eventually returning NULL. This patch does fix this for my hardware.
Signed-off-by: Samuel Williams <sam8641@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Yasunari Takiguchi