On KBL, WHL RVPs, booting up with an external display connected, triggers
below warning, when the BiOS brings up the external display too.
This warning is not seen during hotplug.
[ 3.615226] ------------[ cut here ]------------
[ 3.619829] plane 1A assertion failure (expected on, current off)
[ 3.632039] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.633920] iwlwifi 0000:00:14.3: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
[ 3.647157] Modules linked in: iwlwifi cfg80211 btusb btrtl btbcm btintel bluetooth ecdh_generic
[ 3.647163] CPU: 2 PID: 354 Comm: frecon Not tainted 4.17.0-rc7-50176-g655af12d39c2 #3
[ 3.647165] Hardware name: Intel Corporation CoffeeLake Client Platform/WhiskeyLake U DDR4 ERB, BIOS CNLSFWR1.R00.X140.B00.1804040304 04/04/2018
[ 3.684509] RIP: 0010:assert_plane+0x71/0xbb
[ 3.764451] Call Trace:
[ 3.766888] intel_atomic_commit_tail+0xa97/0xb77
[ 3.771569] intel_atomic_commit+0x26a/0x279
[ 3.771572] drm_atomic_helper_set_config+0x5c/0x76
[ 3.780670] __drm_mode_set_config_internal+0x66/0x109
[ 3.780672] drm_mode_setcrtc+0x4c9/0x5cc
[ 3.780674] ? drm_mode_getcrtc+0x162/0x162
[ 3.789774] ? drm_mode_getcrtc+0x162/0x162
[ 3.798108] drm_ioctl_kernel+0x8d/0xe4
[ 3.801926] drm_ioctl+0x27d/0x368
[ 3.805311] ? drm_mode_getcrtc+0x162/0x162
[ 3.805314] ? selinux_file_ioctl+0x14e/0x199
[ 3.805317] vfs_ioctl+0x21/0x2f
[ 3.813812] do_vfs_ioctl+0x491/0x4b4
[ 3.813813] ? security_file_ioctl+0x37/0x4b
[ 3.813816] ksys_ioctl+0x55/0x75
[ 3.820672] __x64_sys_ioctl+0x1a/0x1e
[ 3.820674] do_syscall_64+0x51/0x5f
[ 3.820678] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 3.828221] RIP: 0033:0x7b5e04953967
[ 3.835504] RSP: 002b:00007fff2eafb6f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 3.835505] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007b5e04953967
[ 3.835505] RDX: 00007fff2eafb730 RSI: 00000000c06864a2 RDI: 000000000000000f
[ 3.835506] RBP: 00007fff2eafb720 R08: 0000000000000000 R09: 0000000000000000
[ 3.835507] R10: 0000000000000070 R11: 0000000000000246 R12: 000000000000000f
[ 3.879988] R13: 000056bc9dd7d210 R14: 00007fff2eafb730 R15: 00000000c06864a2
[ 3.887081] Code: 48 c7 c7 06 71 a5 be 84 c0 48 c7 c2 06 fd a3 be 48 89 f9 48 0f 44 ca 84 db 48 0f 45 d7 48 c7 c7 df d3 a4 be 31 c0 e8 af a0 c0 ff <0f> 0b eb 2b 48 c7 c7 06 fd a3 be 84 c0 48 c7 c2 06 71 a5 be 48
[ 3.905845] WARNING: CPU: 2 PID: 354 at drivers/gpu/drm/i915/intel_display.c:1294 assert_plane+0x71/0xbb
[ 3.920964] ---[ end trace dac692f4ac46391a ]---
The warning is seen when mode_setcrtc() is called for pipeB
during bootup and before we get a mode_setcrtc() for pipeA,
while doing update_crtcs() in intel_atomic_commit_tail().
Now since, plane1A is still active after commit, update_crtcs()
is done for pipeA and eventually update_plane() for plane1A.
intel_plane_state->ctl for plane1A is not updated since set_modecrtc() is
called for pipeB. So intel_plane_state->ctl for plane 1A will be 0x0.
So doing an update_plane() for plane1A, will result in clearing
PLANE_CTL_ENABLE bit, and hence the warning.
To fix this warning, force all active planes to recompute their states
in probe.
Changes in v8:
- Actually add Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Changes in v7:
- Move call to intel_initial_commit() after sanitize_watermarks()
Otherwise the plane update will still consult potentially bogus
watermarks we read out from the hardware. (Ville)
- Carry Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
from v6
Changes in v6:
- Handle EDEADLK for drm_atomic_get_crtc_state() and
drm_atomic_add_affected_planes()
- Remove optimization of calling intel_initial_commit()
only when there is more than one active pipe in probe.
- Avoid using intel_ types.
Changes in v5:
- Drop drm_modeset_lock_all_ctx() since locks will be taken later.
Changes in v4:
- Handle locking in intel_initial_commit()
- Move the for loop inside intel_initial_commit() so that
drm_atomic_commit() is called only once
- Call intel_initial_commit() only for more than one active crtc on boot.
- Save the return value of intel_initial_commit() and print a message in
case of an error
Changes in v3:
- Add comments
Changes in v2:
- Force all planes to recompute their states.(Ville Syrjälä)
- Update the commit message
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530902250-44583-1-git-send-email-azhar.shaikh@intel.com
We believe we have all the kinks worked out, even for the early
Valleyview devices, for whom we currently disable all ppgtt.
References: 62942ed727 ("drm/i915/vlv: disable PPGTT on early revs v3")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717095751.1034-2-chris@chris-wilson.co.uk
We should we have all the kinks worked out and full-ppgtt now works
reliably on gen7 (Ivybridge, Valleyview/Baytrail and Haswell). If we can
let userspace have full control over their own ppgtt, it makes softpinning
far more effective, in turn making GPU dispatch far more efficient by
virtue of better mm segregation. On the other hand, switching over to a
different GTT for every client does incur noticeable overhead, but only
for very lightweight tasks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717095751.1034-1-chris@chris-wilson.co.uk
We broke the LVDS notifier resume thing in (presumably) commit
e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.
Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).
If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.
With the notifier gone we'll also stop looking at the panel status
in ->detect().
v2: Nuke enum modeset_restore (Rodrigo)
Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985c3 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk
If we call into the shrinker for direct relcaim inside kmalloc, it will
retire the requests. If we retire the vma->last_active while processing a
new i915_vma_move_to_active() we can upset the delicate bookkeeping
required for the cache. After the possible invocation of the shrinker, we
need to double check the vma->last_active is still valid.
Fixes: 8b293eb53a ("drm/i915: Track the last-active inside the i915_vma")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719072206.16015-1-chris@chris-wilson.co.uk
We make a decision at module load whether to use the GuC backend or not,
but lose that setup across set-wedge. Currently, the guc doesn't
override the engine->set_default_submission hook letting execlists sneak
back in temporarily on unwedging leading to an unbalanced park/unpark.
v2: Remove comment about switching back temporarily to execlists on
guc_submission_disable(). We currently only call disable on shutdown,
and plan to also call disable before suspend and reset, in which case we
will either restore guc submission or mark the driver as wedged, making
the reset back to execlists pointless.
v3: Move reset.prepare across
Fixes: 63572937ce ("drm/i915/execlists: Flush pending preemption events during reset")
Testcase: igt/drv_module_reload/basic-reload-inject
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk
RC model has these parameters that correspond with each of
15 ranges of RC buffer threshold value in the RC model.
The three elements are range_min_qp, range_max_qp and
range_bpg_offset.
Add the Rate Control range values for eDP/MIPI and DP case.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jose Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-4-git-send-email-anusha.srivatsa@intel.com
Add register defines and shifts that control the RC buffer threshold
between encoder and decoder for eDP/MIPI and DP cases.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.
v2:
- Use _MMIO_PIPE() instead of _MMIO_(_PICK()) (Manasi)
- Combine shifts (Manasi)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-3-git-send-email-anusha.srivatsa@intel.com
Display Stream Compression(DSC) has a set of Picture
Parameter Set(PPS) components that the encoder must
communicate to the decoder.
This patch adds register definitions to
the PPS parameters for eDP/MIPI case and Display Port.
v2:
- Use _MMIO_PIPE instead of _MMIO(_PICK()). (Manasi)
- Use DSC constants as arguments. (Manasi)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-2-git-send-email-anusha.srivatsa@intel.com
The Picture Parameter Set metadata for DSC has to be sent
to the panel through secondary data packets. Add the error
correction registers, data registers and control registers
for the same.
The control registers for transcoders A and B are already
defined and will be reused for Icelake purpose. This patch adds
Control register for EDP and transcoder C apart from adding the
PPS data and error registers.
v2: reuse MMIO_TRANS2 for _PPS_DATA and _PPS_ECC.
The _MMIO_TRANS2(pipe, reg) macro definition takes care of the eDp case
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-1-git-send-email-anusha.srivatsa@intel.com
It was originally introduced following the VESA spec in order to validate PSR.
However we found so many issues around sink_crc that instead of helping PSR
development it only brought another layer of trouble to the table.
So, sink_crc has been a black whole for us in question of time, effort and hope.
First of the problems is that HW statement is clear: "Do not attempt to use
aux communication with PSR enabled". So the main reason behind sink_crc is
already compromised.
For a while we had hope on the aux-mutex could workaround this problem on SKL+
platforms, but that mutex was not reliable, not tested,
and we shouldn't use according to HW engineers.
Also, nor source, nor sink designed and implemented the sink_crc to be used like
we are trying to use here.
Well, the sink side of things is also apparently not prepared for this
case. Each panel that we tried seemed to have a different behavior with same
code and same source.
So, for all the time we lost on trying to ducktape all these different issues
I believe it is now time to move PSR to a more reliable validation.
Maybe not a perfect one as we dreamed for this sink_crc, but at least more
reliable.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705192528.30515-1-rodrigo.vivi@intel.com
If the driver is wedged, we skip idling the GPU. However, we may still
have a few requests still not retired following the wedging (since they
will be waiting for a background worker trying to acquire struct_mutex).
As we hold the struct_mutex, always do a quick request retirement in
order to flush the wedged path.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107257
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717084121.28185-1-chris@chris-wilson.co.uk
Our I915g (early gen3, the oldest machine we have in the farm) is still
reporting occasional incoherency performing the following operations:
1) write through GGTT (indirect write into memory)
2) write through either CPU or WC (direct write into memory)
3) read from GGTT (indirect read)
Instead of reporting the value from (2), the read from GGTT reports the
earlier value written via the GGTT. We have made sure that the writes are
flushed from the CPU (commit 3a32497f0d ("drm/i915/selftests: Provide
full mb() around clflush") and commit add00e6d89 ("drm/i915: Flush the
WCB following a WC write")), but still see the error, just less
frequently. The only remaining cache that might be affected here is a
chipset cache, so flush that as well.
Testcase: igt/drv_selftest/live_coherency #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717092655.28417-1-chris@chris-wilson.co.uk
In the huge pages tests, we may have lots of objects being trapped on
the freelist as we hold the struct_mutex allowing the free worker no
opportunity to recover the backing store. We also have stricter
requirements and the desire for large contiguous pages, further
increasing the allocation pressure. To reduce the chance of running out
of memory, we could either drop the mutex and flush the free worker, or
we could release the backing store directly. We do the latter in this
patch for simplicity.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107254
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717082334.18774-1-chris@chris-wilson.co.uk
We must be able to reset the GPU while we are waiting on it to perform
an eviction (unbinding an active vma). So attach a spinning request to a
target vma and try and it evict it from a thread to see if that blocks
indefinitely.
v2: Add a wait for the thread to start just in case that takes more than
10ms...
v3: complete() not completion_done() to signal the completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716134009.13143-1-chris@chris-wilson.co.uk
Inject a failure into preemption completion to pretend as if the HW
didn't successfully handle preemption and we are forced to do a reset in
the middle.
v2: Wait for preemption, to force testing with the missed preemption.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716132154.12539-1-chris@chris-wilson.co.uk
On reset/wedging, we cancel all pending replies from the HW and we also
want to cancel an outstanding preemption event. Since we use the same
function to cancel the pending replies for reset and for a preemption
event, we can simply clear the active tracking for all.
v2: Keep execlists_user_end() markup for wedging
v3: Move assignment to inline to hide the bare assignment.
Fixes: 60a9432454 ("drm/i915/execlists: Drop clear_gtiir() on GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716125424.5715-1-chris@chris-wilson.co.uk
If we declare the driver wedged before the GPU truly is, then we may see
the GPU complete some CS events following our cancellation. This leaves
us quite confused as we deleted all the bookkeeping and thus complain
about the inconsistent state.
We can just ignore the remaining events and let the GPU idle by not
feeding it, and so avoid trying to racily overwrite shared state. We
rely on there being a full GPU reset before unwedging, giving us the
opportunity to reset the shared state.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-4-chris@chris-wilson.co.uk
On an aborted module load, we unwind and free our device private - but
we left a dangling pointer to our privates inside the pci_device. After
the attempted aborted unload, we may still get a call to i915_pci_remove()
when the module is removed, potentially chasing stale data.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-5-chris@chris-wilson.co.uk
Give in, since CI continues to incorrectly insist that KERN_NOTICE is a
warning and flags the timeout message as unwanted spam. At first, the
intention was to use the message to indicate which tests might warrant
an extended run, but virtually all tests require a timeout so it is
simply not as interesting as first thought.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103667
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716080332.32283-6-chris@chris-wilson.co.uk
We're seeing "RPM wakelock ref not held during HW access" warning
otherwise. Since IRQs are synced for runtime suspend we can just disable
the wakeref asserts.
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105710
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180714173703.7894-1-chris@chris-wilson.co.uk
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Inside intel_engine_is_idle(), we flush the tasklet to ensure that is
being run in a timely fashion (ksoftirqd has taught us to expect the
worst). However, if we are in the middle of reset, the HW may not yet be
ready to execute the submission tasklet and so we must respect the
disable flag.
Fixes: dd0cf235d8 ("drm/i915: Speed up idle detection by kicking the tasklets")
Testcase: igt/drv_selftest/live_hangcheck
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713203529.1973-2-chris@chris-wilson.co.uk
We're doing a pointless translation from hpd_pin to port simply for
passing the thing to long_pulse_detect(). Let's pass the hpd_pin
directly instead.
This removes the assumption that the hpd_pin and port always
match. The only other place where we make that assumption anymore
is intel_hpd_pin_default() and that's fine as it's what determines
the relationship between the two. If we ever get hardware where
the hpd pins are wired in more interesting ways it should be
trivial to handle from now on.
This should also fix the IS_CNL_WITH_PORT_F() case as that mapped
pin E back to port F and passed that to
spt_port_hotplug2_long_detect() which would always return false
for port F. Now that we pass in pin E directly it'll actually
do the right thing.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: cf53902f48 ("drm/i915/cnl: Add HPD support for Port F.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-7-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of looping over ports and hpd_pins, let's loop over
the encoders when doing hotplug processing. And instead of
depending on dev_priv->irq_port[] to tell us whether the
encoder has the ->hpd_pulse() hook or not, we can just
check for that directly. So we can just nuke irq_port[] entirely.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than looping over all the ports and picking the encoder based on
the port, let's just loop over all the encoders instead. Gets rid of
some irq_port[] usage, which is a bit of an eye sore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On gen8 and onwards, we can mark GPU accesses through the ppGTT as being
read-only, that is cause any GPU write onto that page to be discarded
(not triggering a fault). This is all that we need to finally support
the read-only flag for userptr!
v2: Check default address space for read only support as a proxy for the
user context/ppgtt.
Testcase: igt/gem_userptr_blits/readonly*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712191430.9269-1-chris@chris-wilson.co.uk
If the user created a read-only object, they should not be allowed to
circumvent the write protection using the pwrite ioctl.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-5-chris@chris-wilson.co.uk
If the user has created a read-only object, they should not be allowed
to circumvent the write protection by using a GGTT mmapping. Deny it.
Also most machines do not support read-only GGTT PTEs, so again we have
to reject attempted writes. Fortunately, this is known a priori, so we
can at least reject in the call to create the mmap (with a sanity check
in the fault handler).
v2: Check the vma->vm_flags during mmap() to allow readonly access.
v3: Remove VM_MAYWRITE to curtail mprotect()
Testcase: igt/gem_userptr_blits/readonly_mmap*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> #v1
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk
GVT is not propagating the PTE bits, and is always setting the
read-write bit, thus breaking read-only support.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-3-chris@chris-wilson.co.uk
Hook up the flags to allow read-only ppGTT mappings for gen8+
v2: Include a selftest to check that writes to a readonly PTE are
dropped
v3: Don't duplicate cpu_check() as we can just reuse it, and even worse
don't wholesale copy the theory-of-operation comment from igt_ctx_exec
without changing it to explain the intention behind the new test!
v4: Joonas really likes magic mystery values
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-2-chris@chris-wilson.co.uk
We can set a bit inside the ppGTT PTE to indicate a page is read-only;
writes from the GPU will be discarded. We can use this to protect pages
and in particular support read-only userptr mappings (necessary for
importing PROT_READ vma).
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-1-chris@chris-wilson.co.uk
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
Reduce the module parameter to enable or disable.
The link stand by vs full link off was used only once.
And it was actually masking another bug fixed by commit
'84bb2916a683 ("drm/i915/psr: Check for SET_POWER_CAPABLE
bit at PSR init time.")'
So, let's remove these options for now. End goal is to
fully remove the mod param, moving it to a debugfs
interface in upcoming patches.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712052715.8177-1-rodrigo.vivi@intel.com
This allows to read i915_edp_psr_status from tests without triggering
any AUX communication. Take this opportunity to move this under the
eDP-1 connector directory as the status we print is of the sink.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705003121.2478-1-dhinakaran.pandiyan@intel.com
In commit "drm/i915: Wait for PSR exit before checking for vblank
evasion", the idea was to limit the PSR IDLE checks when PSR is
actually supported. While CAN_PSR does do that check, it doesn't
applies on a per-crtc basis. crtc_state->has_psr is a more granular
check that only applies to pipe(s) that have PSR enabled.
Without the has_psr check, we end up waiting on the eDP transcoder's
PSR_STATUS register irrespective of whether the pipe being updated is
driving it or not.
v2: Remove unnecessary parantheses, make checkpatch happy.
v3: Move the has_psr check to intel_psr_wait_for_idle and commit
message changes (DK).
v4: Derive dev_priv from intel_crtc_state (DK)
v5: Commit message changes to reflect the HW behavior (DK)
Fixes: a608987970 ("drm/i915: Wait for PSR exit before checking for vblank evasion")
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712053323.26266-1-tarun.vyas@intel.com
Support for Burst read in HW is added for HDCP2.2 compliance
requirement.
This patch enables the burst read for all the gmbus read of more than
511Bytes, on capable platforms.
v2:
Extra line is removed.
v3:
Macro is added for detecting the BURST_READ Support [Jani]
Runtime detection of the need for burst_read [Jani]
Calculation enhancement.
v4:
GMBUS0 reg val is passed from caller [ville]
Removed a extra var [ville]
Extra brackets are removed [ville]
Implemented the handling of 512Bytes Burst Read.
v5:
Burst read max length is fixed at 767Bytes [Ville]
v6:
Collecting the received reviewed-by.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-3-git-send-email-ramalingam.c@intel.com
Azhar Shaikh