When a driver command which requires the driver to issue a follow up
command using the same command frame is outstanding and a soft reset
operation occurs, then that driver command frame is getting marked as in
use permanently and won't be reused again.
Clear the driver command frames while flushing out the outstanding commands
and avoid issuing any new requests using these command frames while soft
reset is going on.
Link: https://lore.kernel.org/r/20220210095817.22828-6-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hibernation operation fails when it is issued for second time. This is
because the driver is trying to release the IOC's PCI resources after
setting power state to D3.
Set the IOC's power state to D3 only after releasing the IOC's PCI
resources.
Link: https://lore.kernel.org/r/20220210095817.22828-5-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During controller reset, the driver tries to flush all the pending firmware
event works from worker queue that are queued prior to the reset. However,
if any work is waiting for device addition/removal operation to be
completed at the SML, then a deadlock is observed. This is due to the
controller reset waiting for the device addition/removal to be completed
and the device/addition removal is waiting for the controller reset to be
completed.
To limit this deadlock, continue with the controller reset handling without
canceling the work which is waiting for device addition/removal operation
to complete at SML.
Link: https://lore.kernel.org/r/20220210095817.22828-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove some warnings found by running scripts/kernel-doc, which is caused
by using 'make W=1'.
drivers/scsi/mpi3mr/mpi3mr_fw.c:2188: warning: Function parameter or
member 'reason_code' not described in 'mpi3mr_check_rh_fault_ioc'
drivers/scsi/mpi3mr/mpi3mr_fw.c:3650: warning: Excess function parameter
'init_type' description in 'mpi3mr_init_ioc'
drivers/scsi/mpi3mr/mpi3mr_fw.c:4177: warning: bad line
Link: https://lore.kernel.org/r/20211231082350.19315-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Set reply queue depth of 1K for B0 and 4K for A0.
While freeing the segmented request queues use the actual queue depth that
is used while creating them.
Link: https://lore.kernel.org/r/20211220141159.16117-25-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance driver to consider MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a success
for TMs issued by it and check the pending I/Os to decide the success or
failure of the task management requests instead of just considering the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a failure of the task management
request.
Link: https://lore.kernel.org/r/20211220141159.16117-24-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for the io_uring interface in I/O-polled mode.
This feature is disabled in the driver by default. To enable the feature, a
module parameter "poll_queues" has to be set with the desired number of
polling queues.
When the feature is enabled, the driver reserves a certain number of
operational queue pairs for the poll_queues either from the available queue
pairs or creates additional queue pairs based on the operational queue
availability.
The Polling queues will have corresponding IRQ and ISR functions as similar
to default queues. However, the IRQ line is disabled by the driver for
poll_queues.
Link: https://lore.kernel.org/r/20211220141159.16117-22-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print cable management & temperature threshold event data.
Use vendor id & device id macro definitions from MPI3 headers.
Link: https://lore.kernel.org/r/20211220141159.16117-21-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The IOC sends a Prepare for Reset Event to the host to prepare for a Soft
Reset. This event data has two reason codes:
1. Start - The host is expected to gracefully quiesce all I/O within
approximately 1 second.
2. Abort - The IOC is requesting to abort a previous Prepare for Reset
Event request. Normal I/O may be resumed.
Link: https://lore.kernel.org/r/20211220141159.16117-20-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Enhance driver to gracefully handle discrepancies in certain key data sizes
between firmware update operations as mentioned below:
- The driver displays an error message and marks the controller as
unrecoverable if the firmware reports ReplyFrameSize that is greater
than the current ReplyFrameSize.
- If the firmware reports ReplyFrameSize greater than the current
ReplyFrameSize then the driver uses the current ReplyFrameSize while
copying the reply messages.
- The driver displays an error message and marks the controller as
unrecoverable if the firmware reports MaxOperationalReplyQueues less
than the currently allocated operational reply queues count.
- If the firmware reports MaxOperationalReplyQueues that is greater than
the currently allocated operational reply queue count then the driver
ignores the new increased value and uses the previously allocated number
of operational queues only.
- If the firmware reports MaxDevHandle greater than the previously used
MaxDevHandle value after a reset then the driver re-allocates the
'device remove pending bitmap' buffer with the newer size using
krealloc().
Link: https://lore.kernel.org/r/20211220141159.16117-18-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detect asynchronous reset that occurred in the firmware by polling for
reset history bit of IOC status register is set and if that bit is set,
then the driver waits for the controller to become ready and then
re-initializes the controller.
Also reduce the time driver is waiting for the controller to acknowledge
the reset action after issuing a specific reset action to the
controller. The wait time is reduced from 510 seconds to 30 seconds. If the
controller didn't acknowledge a specific reset action within the time
interval then the driver marks the controller as unrecoverable instead of
retrying two more times prior to giving up.
Link: https://lore.kernel.org/r/20211220141159.16117-17-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the driver marks the controller as unrecoverable if there is an
asynchronous reset or fault during the initialization, reinitialization
post reset, and OS resume.
Enhance driver to retry the initialization, re-initialization, and resume
sequences for a maximum of 3 times if the controller became faulty or
asynchronously reset due to a firmware activation during the initialization
sequence.
Link: https://lore.kernel.org/r/20211220141159.16117-15-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Separate out reply and sense buffer allocation and initialization into two
routines and call only initialization routine while issuing the IOC Init
request message.
Also move out the event enable logic to a separate function.
Link: https://lore.kernel.org/r/20211220141159.16117-13-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Save snapdump and fault the controller with the given reason code if it is
already not in the fault or not in asynchronous reset. This ensures that
soft reset is issued from the watchdog thread. This will also be used to
handle initialization time faults/resets/timeout as in those cases
immediate soft reset invocation is not required.
Link: https://lore.kernel.org/r/20211220141159.16117-12-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following special handling is needed for UNMAP commands issued to NVMe
drives:
- On B0 boards, if the parameter list length is greater than 24 and not a
16-byte multiple, then truncate the parameter list length to a 16-byte
multiple.
- On A0 boards, if the parameter list length is greater than block
descriptor data length + 8, then truncate the parameter list length to
block descriptor data length + 8 value.
Link: https://lore.kernel.org/r/20211220141159.16117-10-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add validation for various access statuses prior to exposing attached
target device to the operating system.
Link: https://lore.kernel.org/r/20211220141159.16117-8-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS4 Controller firmware exposes the SES devices in Managed PCIe Switch
as a PCIe Device Type SCSI Device
(MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE).
Driver is enhanced to handle this device type by:
- Exposing the device to the upper layers and
- Not updating any hardware sectors & virtual boundary settings as these
settings are needed only for NVMe devices.
Link: https://lore.kernel.org/r/20211220141159.16117-7-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't issue the soft reset if internal commands are flushed out with reset
status. Soft reset needs to be issued only if commands are really timed
out.
Link: https://lore.kernel.org/r/20211220141159.16117-4-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use spin_lock_irqsave() instead of spin_lock() while acquiring
reply_free_queue_lock & sbq_lock locks.
Link: https://lore.kernel.org/r/20211220141159.16117-3-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes. Notable core changes are the removal of scsi->tag which caused
some churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
RG8vBdpxMudlvxAPi/A=
=BSFz
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, smartpqi, lpfc,
target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
fixes.
Notable core changes are the removal of scsi->tag which caused some
churn in obsolete drivers and a sweep through all drivers to call
scsi_done() directly instead of scsi->done() which removes a pointer
indirection from the hot path and a move to register core sysfs files
earlier, which means they're available to KOBJ_ADD processing, which
necessitates switching all drivers to using attribute groups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
scsi: lpfc: Update lpfc version to 14.0.0.3
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
scsi: lpfc: Fix link down processing to address NULL pointer dereference
scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
scsi: ufs: mediatek: Avoid sched_clock() misuse
scsi: mpt3sas: Make mpt3sas_dev_attrs static
scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
scsi: target: core: Stop using bdevname()
scsi: aha1542: Use memcpy_{from,to}_bvec()
scsi: sr: Add error handling support for add_disk()
scsi: sd: Add error handling support for add_disk()
scsi: target: Perform ALUA group changes in one step
scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
scsi: target: Fix alua_tg_pt_gps_count tracking
scsi: target: Fix ordered tag handling
...
I intended to move from snprintf() to scnprintf() in the previous patch but
I messed up and did not do that. The result of my bug is that it this
function could trigger a WARN() if the buffer is too large.
Link: https://lore.kernel.org/r/20211013083005.GA8592@kili
Fixes: 76a4f7cc59 ("scsi: mpi3mr: Clean up mpi3mr_print_ioc_info()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scanning devices through the 'scan' attribute in sysfs, the user will
observe duplicate device entries in lsscsi command output.
Set the shost's max_channel to zero to avoid this.
Link: https://lore.kernel.org/r/20211014055425.30719-1-sreekanth.reddy@broadcom.com
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This function is more complicated than necessary.
If we change from scnprintf() to snprintf() that lets us remove the if
bytes_wrote < sizeof(protocol) checks. Also, we can use bytes_wrote ? ","
: "" to print the comma and remove the separate if statement and the
"is_string_nonempty" variable.
[mkp: a few formatting cleanups and s/wrote/written/]
Link: https://lore.kernel.org/r/20210916132605.GF25094@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver is not setting up IRQs in the resume path. As a result, hibernation
path is broken and controller will not be operational after system is
resumed.
Set up IRQs to handle the hibernation case.
Link: https://lore.kernel.org/r/20210818081755.1274470-1-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: thenzl@redhat.com
Reported-by: Marco Patalano <mpatalan@redhat.com>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. This patch does not change any functionality.
Link: https://lore.kernel.org/r/20210809230355.8186-30-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix for the following W=1 compilation warning:
'strncpy' output may be truncated copying 16 bytes from a string of
length 64
Link: https://lore.kernel.org/r/20210707081756.20922-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warning reported by static analysis tool smatch:
smatch warnings:
drivers/scsi/mpi3mr/mpi3mr_os.c:873 mpi3mr_update_tgtdev() error: we
previously assumed 'mrioc->shost' could be null (see line 870
Link: https://lore.kernel.org/r/20210629141153.3158-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following warnings:
drivers/scsi/mpi3mr/mpi3mr_os.c:24:5: warning: symbol 'prot_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:28:5: warning: symbol 'prot_guard_mask' was not declared. Should it be static?
drivers/scsi/mpi3mr/mpi3mr_os.c:31:5: warning: symbol 'logging_level' was not declared. Should it be static?
Link: https://lore.kernel.org/r/20210604071407.1360742-1-yangyingliang@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.
Link: https://lore.kernel.org/r/20210603151653.711020-1-yangyingliang@huawei.com
Fixes: fb9b04574f ("scsi: mpi3mr: Add support for recovering controller")
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Goto unlock path before return from function in the error handling case.
Link: https://lore.kernel.org/r/20210603152803.717505-1-yangyingliang@huawei.com
Fixes: c9566231cf ("scsi: mpi3mr: Create operational request and reply queue pair")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The pci_alloc_irq_vectors_affinity() function returns negative error codes
or it returns a number between the minimum vectors (1 in this case) and
max_vectors. It won't return zero. Because "i" is a u16 then the error
handling won't work. And also if it did work the error code was not set.
Really "max_vectors" can be an int as well because we're doing a min_t() on
int type. The other change is that it's better to remove unnecessary
initialization so that static checkers can warn us if there are ever
uninitialized variable bugs introduced in the future.
I changed the error code from -1 (-EPERM) if the kmalloc() failed to
-ENOMEM. And on success path I changed it from "return retval;" to "return
0;" which shouldn't affect the compiled code but makes it more readable.
Link: https://lore.kernel.org/r/YMCJcnmSI4kOIyv/@mwanda
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "mrioc->intr_info" pointer can't be NULL, but if it could then the
second iteration through the loop would Oops. Let's delete the confusing
and impossible NULL check.
Link: https://lore.kernel.org/r/YMCJKgykDYtyvY44@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix a double free, scsi_tgt_priv_data will be freed in
mpi3mr_target_destroy() so remove the kfree() from mpi3mr_target_alloc().
I've also removed few unneeded initialisations.
Link: https://lore.kernel.org/r/20210608145712.16386-1-thenzl@redhat.com
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604023530.GA180997@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Include Hannes' SCSI command result rework in the staging branch.
[mkp: remove DRIVER_SENSE from mpi3mr]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Read PCI_EXT_CAP_ID_DSN to query security status.
The driver will throw a warning message when a non-secure type controller
is detected. The purpose of this interface is to avoid interacting with any
firmware which is not secured/signed by Broadcom. Any tampering on
firmware component will be detected by hardware and it will be communicated
to the driver to avoid any further interaction with that component.
Link: https://lore.kernel.org/r/20210520152545.2710479-23-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Wait for host I/O completion (default 180 seconds) if I/O timeout is
detected on VDs.
Link: https://lore.kernel.org/r/20210520152545.2710479-21-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Unlock the host diagnostic register, write the specific reset type to that
and wait for reset acknowledgment from the controller. If the reset is not
successful retry for the predefined number of times
Link: https://lore.kernel.org/r/20210520152545.2710479-19-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register driver for threaded interrupts.
By default the driver will attempt I/O completion from interrupt context
(primary handler). Since the driver tracks per reply queue outstanding
I/Os, it will schedule threaded ISR if there are any outstanding I/Os
expected on that particular reply queue.
Threaded ISR (secondary handler) will loop for I/O completion as long as
there are outstanding I/Os (speculative method using same per reply queue
outstanding counter) or it has completed some X amount of commands
(something like budget).
Link: https://lore.kernel.org/r/20210520152545.2710479-18-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller hardware can not handle certain UNMAP commands for NVMe
drives. Add support in the driver for checking those commands and handle
them appropriately.
Link: https://lore.kernel.org/r/20210520152545.2710479-17-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of driver returning DID_NO_CONNECT during driver unload allow SSU
and Sync Cache commands to be sent to the controller to flush any cached
data from the drive.
Link: https://lore.kernel.org/r/20210520152545.2710479-16-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This operation requests that the IOC update the TimeStamp.
When the I/O Unit is powered on it sets the TimeStamp field value to
0x0000_0000_0000_0000 and increments the current value every millisecond.
A host driver sets the TimeStamp field to the current time by using an
IOCInit request. The TimeStamp field is periodically updated by the host
driver.
Link: https://lore.kernel.org/r/20210520152545.2710479-11-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detection of firmware fault or any kind of unresponsiveness in the
controller (any admin command which times out) results in resetting the
controller. The primary reset mechanisms used are either soft reset or diag
fault reset. A reset is performed if the host sets the ResetAction field in
the HostDiagnostic register to either 001b (soft reset) or 007b (diag fault
reset). After successfully resetting the controller the driver
reinitializes the controller by going through start of the day
initialization procedure. Pending I/Os during the reset are returned back
to the SCSI midlayer for retry.
Link: https://lore.kernel.org/r/20210520152545.2710479-10-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.co
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement support for handling the following MPI events:
- MPI3_EVENT_SAS_BROADCAST_PRIMITIVE
- MPI3_EVENT_CABLE_MGMT
- MPI3_EVENT_ENERGY_PACK_CHANGE
Link: https://lore.kernel.org/r/20210520152545.2710479-9-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement support for the following PCIe-related MPI events:
- MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST
- MPI3_EVENT_PCIE_ENUMERATION
Link: https://lore.kernel.org/r/20210520152545.2710479-8-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware can report various MPI Events. Enable support for processing the
following events related to device addition/removal to the driver:
- MPI3_EVENT_DEVICE_ADDED
- MPI3_EVENT_DEVICE_INFO_CHANGED
- MPI3_EVENT_DEVICE_STATUS_CHANGE
- MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
- MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
- MPI3_EVENT_SAS_DISCOVERY
- MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
Link: https://lore.kernel.org/r/20210520152545.2710479-7-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The watchdog thread is the driver's internal thread which does a few things
such as detecting firmware faults, resetting the controller, performing
timestamp sync, etc.
Link: https://lore.kernel.org/r/20210520152545.2710479-6-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Send Port Enable Request to FW for Device Discovery. As part of port
enable completion driver calls scan_start and scan_finished hooks. SCSI
layer references like sdev, starget, etc. are added but actual device
discovery will be supported once driver adds complete event process
handling.
Link: https://lore.kernel.org/r/20210520152545.2710479-5-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create operational request and reply queue pair.
The MPI3 transport interface consists of an Administrative Request Queue,
an Administrative Reply Queue, and Operational Messaging Queues. The
Operational Messaging Queues are the primary communication mechanism
between the host and the I/O Controller (IOC). Request messages, allocated
in host memory, identify I/O operations to be performed by the IOC. These
operations are queued on an Operational Request Queue by the host driver.
Reply descriptors track I/O operations as they complete. The IOC queues
these completions in an Operational Reply Queue.
To fulfil large contiguous memory requirement, driver creates multiple
segments and provide the list of segments. Each segment size should be 4K
which is a hardware requirement. An element array is contiguous or
segmented. A contiguous element array is located in contiguous physical
memory. A contiguous element array must be aligned on an element size
boundary. An element's physical address within the array may be directly
calculated from the base address, the Producer/Consumer index, and the
element size.
Expected phased identifier bit is used to find out valid entry on reply
queue. Driver sets <ephase> bit and IOC inverts the value of this bit on
each pass.
Link: https://lore.kernel.org/r/20210520152545.2710479-4-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement basic pci device driver requirements: Device probing, memory
allocation, mapping system registers, allocate irq lines, etc.
Source is managed in mainly three different files:
- mpi3mr_fw.c: Common code which interacts with underlying fw/hw.
- mpi3mr_os.c: Common code which interacts with SCSI midlayer.
- mpi3mr_app.c: Common code which interacts with application/ioctl.
This is currently work in progress.
Link: https://lore.kernel.org/r/20210520152545.2710479-3-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>